Durst Laborator 1200 Manual Eng

7/15/2019 Durst Laborator 1200 Manual Eng
http://slidepdf.com/reader/full/durst-laborator-1200-manual-eng 1/121
DURST PRO USA, Inc.

1600 NE 25th Avenue, Hillsboro
Oregon 97124, USA
Phone: 5038461492, Fax: 5036401878
E-mail: durst-pro-usa@msn.com
www.durst-pro-usa.com
Operating manual
DIIRST OPTOCOH
Basie unit
Durst GA 1V30065e) 5/87

Basic Uni
Content s
Pa g e
D E S C R IPT I O N S 5
1. 1. The basic unit's outflt

1. 2. Dimensions q
1.3. Space requirements 4
1.4. Technical data 5
R A I I G EO F Á P P L I C A T I ON S 6
PREPARIIIG gE BASIC UNIT 6
J.1. Cleaning 6
3.2. llountj.ng the baseboard 7
3. 3. HountinB the counterneight spnings' cover plat e 7
3.4. BaLancing the counter{eight springs t
3.5. Establishing electrj.cal connections o
3, b. Starting up the enlarger head 10
3.7, Fitting the film carrier 10
3.8. Xountlng lens holder and lens panels 10
3.9. Connecting Èhe basic unit to the maj,ns 10
3.10. líountinB the cover plàt.e
3.11. Hounting the cable holder of baseboard
equipped unit, versions 11
4. STARTTflG gP TSE BASIC UNTT f,ITIOIIT CONTROL PAIIEL 11
4.1. Electrical connections of renotê control 11

4,2. Descrlptions of remote control operat,ing
el ements 11
S T A R T I I I GU P T E E B A S I C U N I T X I T I C O N T R O L A } I E L
6. C A R E A H D X A I } I TE N A N C E
6 . 1 . líai n enance 12
A C C E S S O R YA N G E 12
Basic unit
1. DgSCRIPTIONS
D 0 B S To P T O C o | í a m o d u l a r e n l a r g i n g s y s t e m f o r p r i n t i n g
film originals up to 10 x 12,5 cm
(4 x 5 in.)
IIODULAR ON- lon matching unit eomponents to your

STRUCTI0Ií nequirements
S C O P EO F A P - colour as rell as black-and-rh ite Fork,

PLICATI0[: layout-naÈch ing enlar6ements , reduclions,
part en] argements
SáFE ÁllD EFFICIEIIT 0PERÀTIOH depending on unit outfit
- by autoínat.ic prinL size determination and autofcreus
- autonatic erposure control

- use of various light sources
1. 1. The besic unlt's outlit
* OPTO EPU poner supply unit
i OPTO HOT motor uni!
* EI - SIilo ínains lead
* spannen íith gcreFs and tFo metal guides
Basic uni t
Di mens ons
basi.c unit
Space requlremenbs
oubfit including rolJ

papen easel. and autol
matic erposune control
(ac 1201)
Basic uni.t
1.4. Technical data
líai ns suppl y i 22O/ztIO V. 1OO/1'lO/'l20 V, 5o-6{-l llz
Stabilising range : +'tO I - 15 X
Poxer consunpbion : appror. ,lOO VÁ rnax. ( for outfÍt

including all options)
Suggested ambient : 30 to 8oÍ relalive humidiLy, 25

conditions to 55 degrees Celsius temperature
Column height : l7O cm
Haxirnun height ( enlarger
head fully extended) : 19b cn
Speed of adjustment'
smalLest/largest
Ínagnification factor
(autolocus version) : approx. 1O seconds
Baseboard dinensions : 80 r 84 cm
Ilsable baseboard area : 80 x 7o cm
optical axis/column
base distance : 35.8 cm
Net Feight : appror. 54 kg
llagnif ication f actors
,ens Filn size i ni nun* maximum^ maximum*

( lab table)
150 mm 10 r 12-5 cÍ
(4 r 5")
0.? r ?.3 r 11.3 x
135 mn 9 r 12 cm O.b x ó. J r 13 x
1O5 mm bx7l6xq cm 0.q5 r 11.2 t 17.5 x
100 |t|Ín 6t7/6x9 cn O.q Í 11.8 r 18 r
o.3 r 'l x 23.5 x
8O mn 4,516l6xb mm 5.4
50 mm 2q x 36 rnn O.7 / 25t JÓ X
* indicative values
Basic uni I
RAIIGE OF ÀPPLICATIONS
Hhat conponent combinations /light sources are a v a i l a b le ?
COLOUB PRINTI}IG BLACK-À}ID-}IBITE PRI NTIHG
E
- COLTKTï 20t (CLS
501) colour head with ! vnlrxrr.rzorvr-sorl
oríu5 €d ÍgnI so uÍco lor
conlinuouslyadju5lable píinl;ng on cgnvonliondl
colouí lltcrs Y. M, C,0. black'and.while enlarqing pa-
130), built'in densiry conríol (0 pe r as well as variablHon.
.60) an d supplomentary il tíasl onlaígin9 paper, com-
lers (4 5 Y, 15 M) as well as
FEMOBOX 450 N mixing plêro wilh
miring box.FEMOBOX 450 N
box.
-E OPTO<ol AUTOCOLOR
I reuoxr Blw.on..
syslem wilh built-in o0ns6Í nghl $urce toa
colouaand erposuro conkol. píinling ílal black-and-while
low co(ection and erposuío negalives. codpleto with
rimeÍ complelq wilh oPTo FEMOCON 151 and
co l adapter and FÊMOBOX F E M O C O N ' 1 5 2c o n d e n s e í s
45 0 N mixiog box,
l[ oer.o.4cr2o1colouÍ vAHrPorNÍ.t2oo poinr

^gaO WrlDaUlomá!C !
rgnt source roÍ prn0ng
subtracliveexposuíe conkol! eleclígn-mic.oscope as well
law co(eclion, automalic íe as lechnical negatives.com.
cipíocity ailure compensation plele with suíace<oàled
an d VCNA líanslaloí mode; FEMOCON lSll and
lh e ou(Íil ncludes on ê FEMOCON 152Í con.
FEMOSOX 450 N mixing denseÍs,
box,
? PREPÀRING TIE BASIC UilIT
J. r. Cl eani ng
Before assembly cleàn all parts flith a cloth.

Easic uni t
3.2 Hounitng the baseboard
Place the colutnn (1) and en-

Larger head support ( 2) on a
table or the floor
Rold the baseboard (3) against

the column ( 1) and secure rith
the socket head cap screis ( 4) !
ensurj.ng that the reinfoccing
rails (6) are first fitted.
Tighten socket head cap screÍs

nith spanner (5)
llounting the counterxeight spring's cover plate
Pl.acecover plate ( 47/1) on 47fl

colunn ( 1)
Secure cover plate ( 47l1)

ri th screFS ( tt8/1
3 . t l . B a l a n c i n g th e c o u n t e r F e i g h t s p r i n g s
The txo counterre ighÈ springs

are factory adjusted to the
reight of the heaviest enlarger
head (AC 12O1).
l
t11'u,
Upon fitting anoLher enlarger
head, adjust the counterreight
9l!
s p r i n g s a s f o ll o i s : ,'/
'-
Renove scrers
JYIf fi -e
t\1
.t ^
R e n o v e c o v e r 9 9/ 2/ 1
Renove scrers 9/3
Lift cover 9/q t-\
Removescren 9/5 i\i'i\\
\,\
Either remove or insêrt metal plafe
9/6r depending upon enlarger head
.\
beeing fitted (see charts 1, 2)
Basic uni t
CIART 1
EnIar8er head líetal platês
Àu T 0 co L o B12 0 0 Ihsert 1 plate

cL s 5 o 1 fnsert 4 plates
vL S 5 0 1 Insert. I plates
VÀ IPOI íT 1200 fnsert 9 plate:
F EH O KI T X Insert 9 plate:
CEART
Enlarger head fletal plates

nith FEBIDAP
A U T O C O L O R 12 0 0 Remove 2 plate:
cL s 5 o l Insert 1 plate
YL S 5 0 1 Inser! 5 plate:
YAR I POI }I T 12 0 0 fnsert 6 plate!
F EI í OI I T B R fnsert 6 plater
3.5. Establlshing electrical. connecti ons
E s t a b l i s h t h e f o l l on i n g cable connections
Basic unit
Cable ( A) rith "Enlarger Enc. " socket

Cable ( B) rith "EnIarger líot. " socket
For plugging the unit into the mains
First nount the enlarger head

T h e n r e m o v e t he shipping plate
For this proceed as aolloFs:
PIacê enlarger hêad on

baseboard
Secure enlarger head by neans

of knurled head screns ( 7)
_l-ïl
'' r -
Unscren shipping plate ( B)
JJ
- a t t h e re a r o f t h e c o l u m n
- by undoing scrers ( 9)
Basic unit
l.6. SÈarting up the enl.arger head
See operating manual of enlangen head being used
- cls 5o1 / VLS 5O1 / VARIPOINT 12Oo / FEHOKIT Brf

- oPTO - AC 120't
- oPTo - coL
3.7. FitLinB the film carrien
See operating manual of filn earrier being used
- FEBIDÀP BIHÁNEG
- FEHONEG
- O P TO N E G
- O P TO C R O P C A R R I E R
J.8. H ounLing lens holder and lens panels
See Lens holder/Iens panels operating instructions.
3,9. Connecting the baslc un i L to the mains
* Connect the basic unit to the mains supply
3.10. Fitling the cover plate

Main Power
@
OO
ScreÍ docn cover plate ( 47)
using screFs ( qB)
Renoving Ehe cover place:

11B
Undo screns ( 48) and push
cover plate ( 47) uprards.
Basic trni t-
3. 11 Hounti ng the cabl e hol der of baseboard equipped unit ver.sions
Screx hook ( 49) to the Hall

using scner (5O)
4. STARTI}IG UP TEE BASIC UNIT flITROUT COIITROL PANEL
q. 1. Electrical connection of remote control
^ Connect plug (2?l to socket (28)
* Snitch on the unit Fith the

"Hain Sxitch"
4.2. Description of remotê control openating elements
keys for up or doHn enlarger

head movement
30- kêy! for up or doÍn l €n s

movement
31 - "RAPID" keys lor quick ad-

justrDent of lens stage and
enlargen head
32' On/Off sriLch for lens stage

and ênlarger head adj ustnents
Basic uni t
NoTE: Before retro-fitting y o u r D u r s t o P T O C o HF i t h " o P T o - F I , S "

or "0PT0-F['S-HEHoRï", c a l l i n t h e service department of
y o u r country's Durst Sole Agency.
S T A R T I N C ' P Tg E B A S I C U N I T R I T U C O N T R O L A N E L
F o r t h Í s c o n s u l t t h e O P T O - F U S / o P T o - F I S- H E H O R ï , / OP T 0 - P R I H T E R , /
OPTo-TIH operaÈing instructj.ons
b. C A R EA N D H A I N T E N A H C E
6.'l . Ha nt enanc
Íhen that llo !e
Eveny 6 months L u b ri c a t e f ol lo ni ng Use vaseline

-p a bn ot st :h c o u n t e r r e i g h t mineral oil
spri ngs
- both Lens stage
guide rails
- lens stage spindle
ATTEHTI0N: f the counterneigh t springs shoB signs of

Hear, have the service technician attend to it'.
.7
ACCESSORYAHGE
LAGUH: dust coven for basic unit, and enlarger head
OPTOCOM NLARGING YSTEM
OPTOCOM ASICUNIT
AUTOFOCUS OPTOFUS
OPTOFUSMEMORY
OPTOPRINTER
OPTOTIM
EXPOSURE YSTEMS VARIPOINT2OO cLS

FEMOKIT W VLS
OPTOCOL
oPTO AC 1201
FILMCARRIERS OPTONEG
FEMONEG
OPTOCROP.SYSÏEM
FEBIDAP
LENSHOLDERS OPTOUNO
OPTOTRIS
WALLMOUNTING OPTOWAL
OperaLing manual
DIIRST OPTOCOH
OPTO-FUS OPTO-ECU' OPTO_FOS_HEHORY OPTO-PRIHTEN OPTO'TIIí
Du r st G A 1V30055e ) 5/87
O P T O - F U S / O PT O - E C U / O P T O - FU S - } 1E I í O R Y O PT O - P N I N T E R / O P T O _ T I H
Con e n s
Page
I NTRODUCTI N
2. T I I E C O D I T GS Ï S T E I I J
?.1. Set-up code 001 q

2,1,1. Programning 4
2. ?. Status codê 0O2 10
2.3. NV code 003 13
2.4. PV code OO4 1q
2.5, Carri.er set-up code 005 17
2.6. Negative glass compensaÈion cocle OOb 19
2.7. l{emory print out code OO7
2.8. VYY Set-up code OO8 .J
3. T H E A I I T O F O C U SI { P B A C T I C E 24
3. 1. The xorking meÍronies 29

3 . 1 . ' l. St.oring printing data 29
1.1.2. Calling up stored printing dat.a aa
3, 1. 3, Printing out printing data
3.2. changing the roll of paper 3q
3.3. Changing the ribbon Jf
*oPTO-TI|í.'
4. EXPOSI]RE TIIíER 36
q. 1. Description of conÈnols JO
4.2. 0peration J'
4.3. Connecting a roll-papen easel 5(
LENS DÁTA SEËET 38
ERRORSAND TEEIR CAUSES
TECHNICAL DATA 41
,
8. S UPPL E IIE NT
42
8. 1. Description ol controls 42
O P T O _ F U S , / O P T O - E C U / O P T O . F O S . H E H O R Y / O P T O - P RT IE R /O P T O - T I H
1 I I|TRODUCTIOtf
OPToCoX is a modulaP system.
The basic modules are:
* oPTo-HoT - motor unit

* OPTO-ECU - overall control
* OPTo-F{IS - auLofocus conlrol
Supp.l. mentary modul es are:
* 0PT0-FUS-|íEHOnY - Forking menories (1-5O)

* OPTO-TIIí - exposure tiíner
À oPTO-PRINTER - data print,er
OPTO-HOT / OPTO_ECU / OPTO-FOS
These modules offer the folloring advantages:
* Simpte operaLión - built-in user's guide by coíítputar

* Autofocus - print.s are alFays in eocus
* Autosizi.ng - by entering negati vê size and pro-
iênti nh ai 'ê
or by
- entering magnification lactor
x Easy to servie - thanks t.o built-in test program
2. T E E C O D I I { GS Ï S T E H
O PT O - F U S / O PT O - E C Í I O PT O - F US . H E } , í O R Y O PT O - P R I N T E R / O PT O . T I H
"Set-up" codê 0o1
Hemory for programning the auLofocus. optimum auto-

focus funcLion ênsured by absolutely precise focusing
and projectÍon size measureÍnent,
Erplanat,ion of symbol,s you are frequently going

to find in this operating manual.
Symbol )uLfi t
c xiLh OPTO TIH
xi.Èhout.0PTO TIH
Bith oPTo - FUS - XEHoRY
A ri thout OPTo - FIIS - |íEXORY
T rith OPTO llHO single-lens holder
u
x xxr
Fith oPTO - TRIS lens turret
value depending upon programming
and input
Ài ds: ' O P T O - F U S - N E G "l i n e - t e s t negat,ive
Ac c e s s o r i e s : line-plate order code IU 0031

professional focusing magni-
fier PROSCOP
2. 1. 1. Pnogramming
Removal:
- of end sritch ertension pins on lens stage
- of red fi.lter or diffuser
SFitch on t.he unit xith the nain sFitch
OPTO-FUS/OPTO-ECU/OPTO-FOS-HEHORY/OPTO_PRINTEN/OPTO_TI
The lolloxing indica- Run-dorn of routine

tions rill appear in questions and their
s e q u e n c eo n t h e d i s p l a y àl ternatives
A D U R S TO P T O E O H - } J E H O R Ï
s E T U PV E n S T O N P 3 0 . 1 0
Q .1 z
llead noves to referenr:e
setti ng
A ^2 D U B S TO P T O C O T íE T U P
VERSIOH ,tE30. 31 Q. 1Z
C ÁJ n = N X , X X l l v = + X ,X X
P V = + X x X , F / X X ,X
EnLe. co(le OO1
Press Lhe "ST^RT" key
A4 m = X ï , X X } I V - + X ,X X
PV=+XïX,
q IS TIIíER 0PT0-ï1H Ill- Do yotr use the O P T O - T I H

TEGRATED? ES/NO erposrlre t.imer?
Ab STEP 1: cÁnRIER 1 SE- Did you select the

LECTED? carri er?
Press "No"
---> A 7
A7 STEP 2A: CÁRRIER 1 = Are you using the FEHONEG

FE}íONEG? YES/NO film carrier?
Press "YES"
---) A 11
O P T O - F U S / O P T O - E C U O PT O - F U S - } í E } í O R Y O PT O _ PR I N T E R / O P T O - T I H
AB STEP 28: CARRIER 1 = Are you using the BIHANEG

BI}IANEG? YES/NO film carnier?
YES NO
Pness "YES" Press "NO"

---) A 11
A9 STEP 2C: CARRIEB 1 = Àre you using bhe OPTOIIEG

OPTOIIEG? YES/NO film carrier?
YES HO
Press "YES" Press "NO"

---) A 11
410 STEP 2D: CARRIER = Àre you using the OPTOCROP-

O P T O C R O P - C A R R .Ï E S / N O CARRIER?
YES NO
Press 'ïES" Press "lfo"

---) a 11 ---> a 7
STEP 2E: GLASSLESS Film carrier xith SLasses:

C Á R R I E R ?Y E S / } I O Pness "ilO"
Film carrier nithout glasses:
Press "ïES"
412 STEP 2F: USE TEIS CAR- Press "YES"

nI ER AS lrn. 1 ïES
413 UNIT I}I OPERATÍON
414 STEP 2: INSERTcARnIER Insert line-test negative in

1 YES USE TEST NEC no- 1 film carrier
Push filÍn carrier into t.he
unit and pness "TES"
O P T O - F U S / O P T O - E C U / O P O - T U S - H E H O R Y / O P T O _ P N II Ï E R / O P T O - . T I í
415 STEP 3: SELECT ENS! Select lens

Press "YES"
À1 I'NIT IN OPERATION
A 1 ? I ' S E X À X I } í U HC O I , U H N The Drrrst service engineer

L E } I G T H ?Y E S / N O can Ínounb the limit snitch
stope either on set.tinS 1
on setting 2
SETTI NG
Press "YES" Press " lIO"
E ---) A 1B
u ---) A'lg
A 1 B E N T E RL E H S C Í I A I I N E L Enter the lens channel

ER. 1 2/3/4 Press "EllTER"
À19 S T E P 4 : E H T E RF O C A L Enter actual focal lenqth '/a-

LEIíGTIi lue, if sane unknoFn, enter
nominal focal I enílth val ue
Press " EHTEn"
420 S T E P 5 : E N T E RE E For HH values seÊ on page .-

Enter IIH value, if unknoFnr
enter "HULL"
Press "EllTER"
A2'I UNIT 1N OPERATION [Iead moves to maximum magni-

fication factor setting
O PT O - F I I S / O P T O - E CO OP T O - F U S - H E T í O Y , /O P T O - PR I I I TE R / O PT O _ T I } 1
422 STEP 6: FoCÍIS IíANUAL- Sxj.tch on enlarger lamp

LY FITR LENS! YES Focus riLh "SIZE,/LENS
AD J U S T "
Press "YES"
À23 STEP 7: l,lEAStrRE RO- Heasure lenglh being displa-

JECTED IIíÀGE OF IX }í}I yed on projection plane and
ENTER enLer in mm. Pr'ess 'ENTEB"
424 STEP 8: FocUS llAllUAL- Focus by means of

LY FITS LENS! YES .SIZE/LENS ADJUST'
Press "ïES"
425 STEP 9: XEÀSURE RO- líeasure length being displa-

JECTED XAGE OF XX HH yed on projection plane and
EHTER enter in mm. Press "ENTER"
426 FoCAL LEt{cTH ERROR= PrÊss "ïES" ---> A 23

xx, xxÍ IHPRo9E YES,/NO NOTE: deviation smallen than
STEP1O o,o5% ---> ^ 2?
4,27 UNIT IH OPERATION Eead moves to 1:1 magnifica-

tion facton setting
NOTE: display indication nhen
programming 28 or 35 mm enses:
Íxac. ouT oF RANoE, PRESS ES,
EIITER ilEX m. "
BEHEDï: Press "YES"
fhile in S T A T U Sm o d e e n t e r t h e
lg value of the lens being used
(Ëee p.ge 1e rtep 810) End óf
programming
O- s * i t " t on enlargen tamp

A28 STEP11: Il,lAGE N fmage in focus:
FOCUS ES/NO Press "ïES" ---> A 30
- Image out of focus:
Press "NO"
OPTO-FUS/ PTO-ECU/OPTO-FUS-HEHONY/OPTO
IT-EPNR/O
I P T O _ T IÍ
429 STEP 12: FOCttS íÁllUAL- Focus by means of:

LY FITH HEAD!YES "FEAD ADJUST"
Press "YES"
A 3 O E l l D O F A U T O F O C U SE T - Rould you like to progran

UP? YES/NO additional lenses?
Yes: Press "llO" ---> A 14
llo: Press "YES"
431 m=XX, XX ilY=+ltXX

P9=+XXX, F/\.XY.
End
o A32 m=xI, x x lfv -+ x , x
pV=+XXX,
O P O -F U S , / P O _E CU O P T O - F' S -HE I í O R Y / P O - P R I N T E R /O P O - T I H
2.2. Stat.us code 0O2
By entering knonn lèns charactenistics you may program

or monj.tor your unit. líeasuring and focusing ron'L be
required for this.
tep splay Run-doín of routine questions

and their alternatives
B1 r$-IX, XXX NV=+X, XÍ

P V = + X X X ,X F / X X I
Enten code O02
Press "START"
B? m = X X !X X N N Y = + X , X X
PV=+XXIr X
B3 IS TIHER OPTO-TIH IN- Áre you usinS Lhe OPTO-TIH

TEGEATED? YES,/NO erposure timer?
YES NO
Press "ïES" Pness "NO"
B4 I í O D I F Y F T T g E } I T E RO R Press "STEP " or REF.

COI{TINUE TTH STEP Compare C value xith table
REFC = XXXX,X bPer el osís a" En N
d Ti E
f R n" e c e s s a r y c h a n g e
Pness "STEP
LII,íIï SBITCÍI STOP
O P T O - F I ] S / O P T O - E C U / O P T O - F U S - H E H O R Y / O P T O - P RI T
I E N /O P T O . . T IH
imit sFitch stop on setting 1
EF C FiLh- EF C nit
ut SIasg I ass
1rt1O, 14 0 9 , O
1415,6 1 l1,t,
14 0 9 . o ' l t 0 B ,B
1 l0g, o 14 0 8 ,
Limit sritch stop on setting
i ,l m IEP C xith- REF C xit

arrier )ut glass glass
i E I{ O NE G 1183 ó 1182 I
]I } íÀHE G 1189 4 1188 7
)PTOI{EG 1182 I 11 9 2 D
)PT0CR0
]ARR 1183 I 1 1B?- ó
5 USING SIIICLE LENS- I Press "YES"

BOABD? ÏES/NO tJ Press " llo" ---) B?
B6 ENTER LEIIS CHiINNEL Enten Iens channel

NR.1/2/3/4 Press "EllTER"
87 E N T E RL E } I S N R . 1 / 2 / 3 Enter lens numben

Press " EilTEn"
B8 EIITEB CARRIER HR. Enter fiIÍn earrier number'

1 2/3/4 Press "ENTEB"
íODIFY FITE ENTER OR Press "STEP " on change

'rFrl
CONTÍIIOE IIITE STEP f^^ál lêntth
LENS X CARNIER X Press " ENTËIl"

F = XIx, lX Press "STEP
O P T O - F I ' S / O P T O - E C U O P T O - F U S - I , | H O R Y /O P T O - PR I H T ER / O PT O - T T H
81 O } ,IO DI Y NI T E E NT E R OR Press "STEP " or change

CONTINI'E FITR STEP EE value
LENS X CARRIER X Pness "ENTËR"
+
Eg'= XX,XX Press "STEP
81 1 Ii O DI F Ï IíI T f, E } IT E R OR Press "STEP " or change

CO}ITINUE iITE STEP dA v a l u e
LENS X CARRIER X Press "ENTER"
dA = + XX,XX Press "STEP
B12 E l l D 0 F C Á S T A T U SY E S / i l O A r ê y o u g o i n g t , o c h e c k ,
modify on program aneí
o t h e r I e n s c h a n n-e- l-,>s ?
YEs: press "No" B 5
llo : p r e s s "ïES"
O 813 m=XX, X! rY=+Ï, XX

PV=+XXX, . F/tX.X.
END
(_.) B ' l4 m=Ix, XXX Iv=+I, XX
PV=rXXX,
O P T O - F U S / O P T O - E C U / P T O - F U S - h E H O N Y , /P T O - P R IN T E R / O P T O - T I I {
2.3. NV code OO3
If the film original's thickness differential is not

knoFn, use t.he user's guide code oo3 ( NY = negative
va i a Lor)
St ep Di spl ay Run-dotn of routine ques-

tions and their alternabives
C1 m=XN, xx ilv=+x' xx
PY=+XXX, F/XXX
Enter code OO3
Press "SïART"
C2 n=XX, IX NY=+X, X
PV=+ÍXXr
c3 STEP 30: I'SE LENS RITf, Use the lens havinS the
Sf,oRTES oCAL LENGTR! shortest focal Ienglh
YES Press "YES"
---> c tt
I
Ll ---> c 5
C4 E N T E R E N SC R A N H E L Enter appropriate lens
llR,.1/213/U chqnnêI
Press "EllTER"
C5 I]HIT IN OPERATIOH
Cb STEP 31: FocUS íANUAL- O SFitch on enlarger lamp

LY FITn LEIS! YES Focus by means of:
.SIZElLEXS ADJUST''
Press "YES"
ïoTE: if "STEP 32 Nv oUT OF
BANG E ET RY!YES" is being
indicated, p.ess "YES" ---> c 3
O cZ m=XX, Xf Nv=+X, X
Pv=+XXX, F/xXX llV indicates the film origl-
nal' s thickness differential
Cg m=XX,XXX V=+X,XX ( m m ) t h a t h a s b ê e n e s t ab l i s h e d
C
PV=+XXX,
Elrt)
13
O P T O - U S /O P T O - C U O P O -F Í ' S - H E H O R Y / P O - PR I l T E R /O P O - T I H
2.4. PV code 004
NOTE: These instructj.ons are only meant for the establi-

shment of the Lhickness differential of papÊr easels,
Ivne at ol l t hoet h er er f ecr ea ns ce es t hpel a ndei s tm
a nu cs te b ed i fnf ee raesnu Lr ei adl b y r eh laant di -
and the respective value entered.
Ste p Display Run-doxn of routine ques-

tions and their alternatives
D1 m = X I , N XN V = + I , X
PV=+XXïr F/XXX
Enter code 004
Press "START"
(J m=Ix, xX Nv=+xr x
PV=+IXïr X
UJ USING ENLARGER flITS [Ipon usi ng:

BASEBOÀRD ES/NO? - baseboard-equipped enlanger
or lab furniture xit,h unit
table in no. 1 sehting
Prêss "ïEs"
- enlargêr Íithout. baseboard
or lab funniture rith unit
table in sêtting 2, 3, tl or
Press " llo"
'lq
O P T O - F I ' S / O P T O - E C U /O P T O - F U S _ H E } , I O R Y , P
/ T O - P R I N TE N / O P T O T } í
D4 R E T I O V EF N O } I E A S E B O A B D AII it-ems are to be taken

AL L l T E } JS Y E S off the baseboard
[oTE: upon using the 5o mm
Iens, remove the folloxing
parts, if they arê still
nounted:
- I i m i t s r i L c h e s 'e x t e n s i o n
pins of the lens stage
- diffuser or red filter
Press "YES"
D5 UNIT IN OPERATIOII Enlarger head moves to the

1 : 1 magni ication setLi ng
Db S T E P 4 0 : F O C U SX A T Ï , A L - O SHitch on enlarger Iamp

Lï FITE EEAD! YES Focus by means of:
. IEAD ADJITST"
Press "YES"
llOTE: if "STEP q1: PV OUToF
n A N G E !Y E S " i s b e i n g i n d i c a -
ted, press 'YES" ---) D 1
D7 E N T E RD I S T A H C E - E H - IIpon usi ng:

L A R G E R - S O C K E TO P R O - - 0PT0-t{AL xall mounting) fit
JECTION-PLAHE N }íH t h e F O C U S I I I GA R I ' í o t h e b a -
sic unit ( see 0PToHALnstruc-
tions). take a measurement of
distance A and enter in mm
FOCUSIHG AN},í
ROLL PAPEB t]IIIÏ
Press "ENTEB"
15
O PT O - F U S / OP T O - E C O O P T O . F U S - I í E H O N Y O PT O - PN I N TE B / O PT O - T Ï H
LABoH Lab lurniture)

Take a mea surement of dis-
tance B and enter in mm
L ABOH
unit table
Press "ENTER"
Opa m =X X , ï X Nv =+x , ï
Pv=+XxX, F/XXI
PV indj.cates bhe height die-
ferential ( Ínm) of the pro-
jection plane
Ope m =X x , X X llv =+x , I
PV=+IIX,
END
16
O P T O - F U S / O P T O - E C U / O P T O - F U S - H E H O N Y /P T O _ P N I I T E R /O P T O - T I , t
2.5. CARRIER SET-UP code OO5
L' Programming the

film carriens
program the height differential
tlse code 005 to betxeen the
negative planes
of the FEHotlEC, BIHAIIEG, 0PTONEG, 0PTOCR0P-
CARRIER and FEHKÁ filn earniers ( 4 film eanriens maximum)
StÉp Display Run-dorn of routine ques-

tions and their àlternatives
Cnr n = X X ,T Ï X H V = + X , Í
PV=+XXXr F/XXX
Enter code OO5
Press "START"
Onz mV= =x +
P x ,XxXxX , N v = + x , x
STEP 50: USE LEIIS FITR Irse the lens having the shor-
SEOBTEST OCALLEHGTH! test eocal length
ïES Press "YES"
---)E4
!| ---> E 5
T -l
L__t
Eq ENTER LENS Cf,ATIIEL HR. Enter the appropriate lens

1 2/3/4 c ha nnel
P.ess "ENTER"
E5 S T E P 5 1 : I ' N T E RC A R R I E R F i . E t h e d e s i r e d f i l m c a r r i e r i n
NB.2/3/4 the unit and enter its number
Press "ERTER"
Xake a nole of the number'

in the tabIe.
E}10 EG
IIíAHEG
PTONEG
ï oc noP c A n
17
O P T O - F U S / O P T O - E C t I / O P T O - F U S - H E H O B Y / O P T O - P R IT E R / O P T O . T I X
UXIT IH OPÊRATION
c2 S T E P 5 2 : F O C U SH A N t I A L - O síitch on enlargen lamp

LY NITN LENS! YES Focus by means of:
.SIZE,/LEilS ADJI'ST'
Press "YES"
Ons m=xx,xx Nv=+x,x

PY=+XXX, F/LXX
The "CARRIER"L E D r i l L no F
indicate the filn carrier
thaf has been programmed
Ons m = X X , I X i l V = + X ,X I
PV=+XXXr
END
18
O P T O . F U S / O P T O - E C I ' / O P T O _ F U S - I í E H O R Y / O P T O - P RTI E N / O P T O - T I H
2.6. Hegative glass cotDpensation code oob
This code is used upon changing film carrier

glasses of met,al format masks-
The code is requj.red for the compensation of

glass thickness and netal. mask thickness dif-
lenenti al s.
NoTE: AII Iens channels that have bee programmed are

automatically readjusted for each film carrier
Ste p Display Run-donn of routinê ques-

tions and fheir alternatives
Q rr m=Xx,xx Nv=+X, X
PV=+XXX, F/XXX
Enter code Ob
Press "START"
O ru n= Nï, x x Nv=+X,ï
pV=+XXï, X
F3 STEP 60: USE LENS IITE Use the lens having the shon-
SIoRTES FoCÁL LENGTE! test focal length
YES Press "YES"
l| ___)Fq
I I ---2 f )
U
Fq EilTER LENS CHANIEL l{R. Enter the appropriate lens

'l
/2/3/4 channel
Press "ENTER"
F5 STEP 61: EHTER CAR- Enter film carrier number

Rf ER lf R. 1 2/ 3/ 4 Press " E}ÍTER"
O PT O - F U S / O PT O - E C I ] / O P T O F U S - H E H O R Y , /OPT O - P B I N T ER / O PT O - T I } , I
F6 IITIIT IN OPERATION
S T E P 6 2 : F o C U SX A N U A L - O SxiLch on enlarger Iamp

LÏ RITS LEUS! ÏES Focus by means of:
"SIZE/LENS ADJUST"
fress I EJ'
OEs m=XX, XX NV=+I, X

PV=+XXX, F,/IXI
The unit Fill. noF fake into
account glass or forma! nask
thi c knes s.
One m=XÍ, XxX Nv=+I, fï
PV=+ïXX,
E}ID
20
O P T O - F U S , / O P T O - E C I ] / O P T O - F U S _ I ' I E H O R Y /P T O - P N T I T E N / O PT O _ Ï I H
2. ?. líemony print out code 0O7
Di spI ay PrinLer Run-doFn of routine

questions and their
alt,ernatives
Ocr n=Xf, XïX

NV=+X, X
Pv = + X X X ,
F,/XXX
EnEer code 007
Press "STÁnT"
O.z m=XX, XX
N
PVV == ++ XX ,XXX ,
G3 XEHORT RII{T IíETíORY RINT REF C values (see page 11

OUT O U T R E F .C = step B 4)
xxxr,
USING SINGLE
LENSBOA D
tT-t Press "YES"
Press "NO" ---) c7
U
YES/ NO?
G5 TíEHOBYPRINT OPTO_I'NO
ouT
Gb EHTER LEHS Enter Iens channel

CHÀNNEL NR. Press "EllTER"
1/2/3/4 ---> G I
}íEHORYPRINT OPTO-TRIS
OUT
c8 ENTER LENS
nA. 't/2/3
O P T O - F I ' S / O PT O - E C U / O PT O - F U S - } í E I { O R Y /OP T O - P R I N T E R / O P T O -T I H
c9 } í E H o R YP R I I I T LENS NR = X
OI'T
G 1O E N T E RC A R R I E R Enter film carri,er number

NA. 1/2/3/tl Press "ENTER"
G11 HE}IORY RIilT C A R R I E RN R = X

OUT F = XXï,XX
. tr['= + X,XX
da = xxx, x
G1 END OF XEHORY Hould you like to transeer

PRINT OUT? additj.onsl. lens focal length
ïES/ NO vYae lsu: e sP r el os s t h e d a t- a- - > p r iG

n t el lr ?
"NO"
No : Press "YES"
C G1 m=XX, XX
NV=+X, r
P Y = + x x ï ,X
F/ XTX
E}ID
G1 m=XX, XI
NV=+X,X
PV=+XXX,
OPTO FUS,/OPTO_ EC ' / OPTO_F US- I,'EHORY/ OPT O PR }IT ER OPTO TI H
2. B. "VVVset-up" code 0oB
Pressing the "FILH CRAI{CE oSITIo}| " key causes

the head Lo move to an easily accessj.ble height for
the siELing user.
St ep Display un-dorn of routine quest.ions

nd their alternatives
O nt m = X I ,X x X l l V = + X , X
PV=+ïIX, X. F/\\X
E
P nr ebsesr c" soTd Ae RoTO" B
O sz m = X X ,I X Nv=+x, N
PV=+XXX,
E3 FILIí CHANGE oSITIoN 1) If project.ed image is in

IN FOCIIS? ES/NO focus, press "YES"
2) ff projected image is out
of focus, presg "No"
a E,t m=XX, xX IV=+X, XX

P v = + I X X ,X F / X x X
E ID
C tS m=XX, xX Nv=+x, x
PV=+XIX,
23
O P T O - F S /O P O - E C ] O P O - F U S - } I H O R Ï /O P O - PR TN T E R /O P O -T I H
T H E A U T O F O C O SN P R A C T I C E
Ste p Di. pl ay Run-doBn of routine questions

and their alternatives
-t t- " r l m=XX, XX IV=+X,XX Upon using the film carrier:

PV=+XIX, F/XXX - FEIíONEG ---> I 3
- BI},ÍANEG--> I4
- oPTONEG ---> I 5
m = X X , X X l í Y = + X ,X X - O P T O C R O P - C A R R I E R- - > I 6
PV=+XXX,
- Cit lens, mi:ing bor and

glass or glassless nask
- i.nsert film carrier
ilm si.ze Le ns iEHO- FEIíO
íASK BOX
24r3b mn 5 0 ÍnÍn 15 l 35N

.5x 6 cm 8O mm t5 lr 66 r{
6rbcm óu mm 16 lf 66N
6r?cm o o / 10 5 r7N 69 l{
6x9cm 105 mÍn r9N b9N
9r'l 2 cm 135 mn 12N450N
' lO r 1 2 ! 150 mm
5cm 150 450 lf
415
___> r .l
lc - fit lens, miring bor and

glass or glassless mask
- insert film carrien
;iIn size L en s ]INE- BIHA

{A BOX
24x36 mm 50 mm 35 35
l . 561x b6c mc m 80
8O rnm
mm 45 66 66
66
6r?cm O0,/ 05mr 67 ó9
6x9cm 105 mm 69 69
---> Í 7
24
O PT O - F U S / O PT O - E C U / O P T O - F ' S - H E T í O R YO PT O - P R I N TE R / OP T O T I H
15 Fit "oPTODAP-NEG"nd "OPTO-

DAP-BOX" dapters ( see sand-
rich-type carrier instructions)
Fi t I en.s as xeI I as ni xi ng bor
and insert film carrier.
i.lm size Len ]PTO - FEHO-

NEG BOX
24x36 nín 50 mm J) 35N

4.5r b cn 80 mn 45 b6N
6rbcn 8O mn 66 b6N
617cm 'too/105 o í 69N
óx9cm 105 mm 69 69 l i
9r12 cm 135 mm
1O r 12 , 5 c n 15O nm r50 qn
4x 5 "
---) Í ?
I6 Fit "OPT0DAP-HEG" and "OPï0-

DAP-BOI" adapters ( see sand-
riah-type carrier instructions)
f n s e n t O P T 0 C R O Pm a s k i n f i l . m
carrier ( lor detailed instruc-
tj.ons see 0PTOCR0P opDrating
ínanual )
Snitch on enlarger lamp
I8 Plaee negative in fi lm carrien
Select fi.Im carrier number ( see

PaBe 17 step E5)
Press "CÁRÍlIEIl"
r10 I Enter number of lens h e i n g

used
Press "LElÍS"
I11 n Select lens

Iêns holder
by turning
1)
O P T O - F U S , /O PT O - E C O / O P T O - F ] S - H E H O R Y O PT O _ PR I H T E R / O PT O - T I H
112 Enben desired ftagnificatlon

factor- There are t,hree xays
fon doing this:
1) Enter magnification factor

Pness "m"
2) Enter percentage value

Pness "F"
3) Enter the negative's edge

length, press 'N"
Ent.er desired projecti,on
size ( edge length)
Press "P"
Press "ENTE8"
NOTE: Use the same unit of

measure nhen en tering edge
lenght values for negatives
and projection sizes.
I13 Press "FILIí CHAIíGE OSITIoN".

The enlarger moves to an ea-
sily accessible height for
the sitting user.
1 14 Adjust filtration, exposure

time and f/stop aceording to
the light source being used.
I15 Press "START"
Ilb FOCUSING PERATIOII The unit focuses automati-

cally
L\? Triggen the exposure
END
?6
O P T O - F U S / O P T O . E C U / O P T O - F U S - H E H O N Y / O P T O - P Rl TI E N / O P T O - T I X
For erample:
The negative of a photo taken from a shoe is Lo be printed
in Lhree differenL sizes. The len8th oa the shoe in the
negative amounts to 4.3 cm.
1st print: length of shoe 15.8 cm

2nd print: length of shoe 31.6 cn
3rd print: length of shoï 57.3 cm
FILH ORÍCINÀL
4x5in. negaLive
Xaking tha first print
Ste p Display Run-dorn of routine queg-

tions and !hei.r alternati.ves
O J1 m = I X , ï X N v = + X ,x
P9=+XXX, F/XXX Enter length of shoe n
the Degative
Press "ll"
O .lZ m=XX, XX NV=+X, x
pV=+XXX,
J2 N=4,3 P=XXXX, PRESS Enten projection size ol 1st

EUTE8 T0 RE^D ,D" print
Press "P"
J4 N=4,3 P=15, PRESS Press "EllTER"

E I I T E RT o n E À D m "
C C: m = 3 , 6 7 r rH V = + X , Í
PV=+XXX, F/XX,
Press "START"
O ,o m=3,6?4 Nv=+X, x
P V = + r f X ,X
J7 FoCUSING PEnATIOII The unit. focuses automatically

Expose ---> J I
O P T O - F U S / O P T O - E C U / O P T O - F U S - H E } í O R Y /P T O - P R I N Ï E R / O P T O _ T I H
)íaking the second print
Step Display Run-doxn of routine ques-

tÍons and thei.r alternatives
JB U I I I T I N F O C U SP R E S S Press "STOP"
S T O P 0 R A D J T S TS I Z E Enter projecfion size of se-
cond prinE
Press "P"
J9 [=4, 3 p=]1, 6 PRESS press "E]|TER"

EIíTEBTO READ n
lQ ;r o m = ? ,3 4 8 N v = + x , x x
P V = + Ï X X ,X F , / I X X
Press "START"
Q ;r r m = ? ,5 q B N Y = + x ,x x
PY=+XXXr
J12 F O C U S I I GO P E R A T I O N The uniÈ focuses automatically
Expose ---> J 13
íaking the third print.
Ste p Display Run-dorín of routine ques-

ti.ons and their alternatives
J13 I I I I I T I l f F O C U SP R E S S Pness "SToP"

STOP OR ADJITST IZE Enter projection size of
third print
Press "P"
J14 N=4,3 P=5?, 3 PRESS Press "ENTER"

E N T E RT O R E A Dm
O ;r E rn=13, 25 llv=+x, XX
PV=+XXX, F/XXX
Press "STABT"
Q - l t O n = 1 3 , 3 2 5 r { v = + X ,N x
PV=1XXX,
J17 FoCUSIIIG PERATIoN The unit focuses automatically
E xp o s e
EIID
O P T O -F U S / O P T O -E C U l O P T O -F U S - H E H O R , / O PT O - P R I I T E R O PT O _ T } í
3.1. The íorking menories
T h e o P T O - F I I S - H E H O R Io d u l e i s e q u i p p e d r i t h 50 xorking
memories for storinB all printing data.
3. 1 1 Stori ng pri nti ng data
Step Display Run-dorn of routine ques-

O rr r n=x x , X X ilv =+X , x I ---r x :

PV=+XXX, F,/XXX
O xz n=x l, x x ï Nv =+x , Í f] ---, x ,*

pv =+f x l, I
K3 Enter lens channel, e- g. 2

Press "LEllS' ---) K 5
Select Iens on oPTo-TRIS

e.8. 3
K5 Enter film carrier number,

e.8. 4
Press "CARRIER"
EnÈer nagnification f act.on,

e. s. ?.952
Press "m"
O Enter erposure time, e. g

8,2 seconds
Pness "EXP. IHE"
Enter Forking neínory number,

e.g. 5
Press "ST0RE"
O PT O - F U S / O PT O - E C U / O PT O - F U S - H E I , I O B Ï / O P T O - PR I N T ER O PT O - T I } í
Cre Y=XXX H=XXX C=XIX

D=XXX F/SToP XXX
ENTER OB STEP c[=5 Press "STEP --> Kl 0
- - > K 11
ï=xxx H=xxx c=xxx

or o
Ors enter yelLon filÈer value,
D=XXX F/SToP IXX e. g. ?o
T = X X X ,X E N T E R Press "ENTER" -> K1o o
0R STEP^ cS=5 --) K1t Q
e K1O Y= 70 H=XÍX C=XXX

D=XXX F/SToP lxx
E N T S RH o R s r E P ^ c f l = 5 Press "SïEP À --> rre I
--1
rt: Q
K.l Y= ?O H=XXX C=rXX enten magenta filten value,
D=Ixï F/SToP IXX e.8. 50
T = X X X ,X E N T E R í Press "EilTER" - - > K 1 z Q
oR srEP ^ cH=5 --) K13
O
o K 12 ï = ?o ) í = 5 0 C = I X I
D=X X X F / S T O P Ï X X
EIITER C 0 R S T E P c[=5 Press "STEP^ " --> K14
- - > K 15
o
K 1 3 l = 7 0 H= 50 C=XXX
D=X X F/STOP XXX
enter cyan filter
e.g. 0
value, o
T=XXx,
O R S T E P^
E N T E RC
cn=5
Press "ENTER' --> K14
--> K1
o
o Klq Y = 70 X = 50 C= 0
D=x x x F/ s ToP X X X
EIITERD OR STEP CS=5 Press "STEP ' --> K16
- - > x 17
o
K15 r= 70 u= 50 c=O enter density value,
D = I X X F / S T o PX X X e. g. 15
T=X X X , E I I TE R
oR STEP^ cS=5
P r e s s " E I I T E R " - - > K 16
--> K1
o
30
OPTO-FUS/OPTO-ECU/OPTO_FUS.HEHORY/OPTO-PN
I TI E N / O P T O - T I H
O K16 Y= 70 x= 50 c-o
D= 15 F/sToP XXX ENTER
F/SToP 0R STEP CII-5 p r e s s ' , S T E PA , ' - - ) Kl9 O
--) K18 C
or
O K17 Y= 70 tl= 50 C=O enter F/stop, e. g. 1b
D- 15 F,/SïOP=IXX Press "EtlTEB" --) f,19 a
T=tXr,I ENTER /SToP --> Ktg
C
oR STEP l cB=5
K18 Y= Zo lt= 50 C=O press "STEP^ " --> K19

O
D=15 F/SToP16 T=XXX,f or
E N T E RE I P . T I I í E 0 R enLer erposure Líme,
STEP CE=5 e. g. 2 seconrls
P r e s s 8 ". E N T E R "
O K19 n=?,852 Nv=+N,IX The folloning data rill be

PV=+XXX, F/XXX stored automatically:
- negative variator
- positr.ve variaton
K2O n=?,852 lfV=+X, X - magnification fact.or
O - film carrier number
PY=+XXX, F/XXX
- exposure time
C
END
31
O PT O - F U S / O P T O - E C U , /O PT O - F U S - H E H O R Y / O PT O - PR I N TE R / O PT O _ T I h
3.1.2. Callj.ng up stored pr.inting data
Step splay Run-doHn of routine ques-

O L1 m=Xxi xx N v = + X ,X x
PV=+ïXX, F/XXX Enten Forking memory nunber,
e.g. 5
Press "RECALL"
C L2 m=XX, Xï NV=+Xr ï
PY=+XXX,
L3 S E L E C TL E I I S 3 ! Y E S Hount OPTO-TRIS ( see lens

holder instnuctions)
S
P er el es cs t ," Yl eEnSs" 3
L4 IISE OPTO-UIíO ENS 2! líount OPTO-II|O ( see lens

YES holder lnsEructions)
Fit no. 2 lens and enter 2
Press "CARRIER"
Press "YES"
L5 I I S E C A R R I E RN R . 4 ! Y E S fnsert no. 4 film carrier

Press "YES"
O Ló Y=50 H=50 c=o

D= 15 F/SToP 16 c8=5
P R E S SC L E Á R T 0 E X I T Take over or set fi.Ltration
or correction data
C LT ï=?O }Í=50 C=O D=t5 press " CLEAR"

F / S T O P1 6 T = 8 , 2 C g = 5
P B E S SC L E A R T O E X I T
O Lg m
P Y= ?= ,+8Í5X2X , N
X vF= +1X6, X oEPr pToos-uTrIeH dt j i.smpel ai ny d, i cea.tgi o. n 8 . 2o n
o L9 m=?,852 i l V= + ! ,XX
pV=+ïXX,
EHD
J4
O PT O - F U S / O PT O - E CD / O PT O - F U S - HE H O R , /O PT O - P N } I T E R , /O PT O - T I X
3. 1. 3. PrinLing out print,ing data
Di spl ay Run-doFn or routine ques-

tions and their alternati'/es
Cí? m = ï X ,X X Í H Y = + X , X
P v = + X ï X ,X F / X X X
Enter norking memory numher
Press "PRINT"
O tiz n=xx, XXx Iv=+X, Xx
PV=+XXX,
H3 DATAPRINT OUT
PRIIITIN6 DATA
CH= ?
lil= 4,256
1.11t=+ ,eg
P!r=+ 8,8
rrPrO-lRlD
LEuS .tR
CHRRIERIR 2
V= 85
t4= 56A
(:=
lr= 23
F,.,!:Ttrp I
T= e,2
c Hrr m=XX, XÍ Iv=+X, xx

PV=+NXX, F/XXX
OHs m = X X , X X i l v = + X ,X I
PV=+ïXX,
EIID
33
O P T O _ F U S /O PT O _ E C I ' / O P T O _ F U S - N E } í O R Y / PT O P B I N TE R / O PT O - T I H
Changing the roll of paper
He recommend stock 2 - 3 rolls of papen alnays.
Order code: AD 8391 Paper xidth: 45 mm
I -44
ryYffiW
6# t'-7* - Remove cover
- SFing out pninter
Fit roll of paper
Push paper thr ough slit

SFing back pr1 ncêr
Push papen into the feed

Írecha ni sm
Press key until paper is

adyanced automatically
34
O PT O F U S / O P T O E C ' l O P T O -F O S _H E H O R Y /O PT O P R I H T E R / O PT O _T I H
- Refit cover
3. 3. Changing the ribbon
lle recommend to stock one ribbon alFays.
order code: AD 8 3 9 2 0
'ffiw Remove cover
pressure
rEi rgehrtt - h a n d s i d e o an nbdh ree m
r i .obvbeo n s
Inrert hei ribhon
Refi t cover
OPT O _ U S /O P O -E C J lO P O -F U S - H H O N YO P T O _ P I N T ER / O P O -T I H
tl . 'OPTO-TIH" EXPOSURE I},IER
It. 1. DescnipLion of contnols
EXPOSURE IHE
DiSital exposure time disPLaY

( Bange from O.1 up to 999 seconds)
EXP. TIHE To enter erposure times, e. g. ?

P r e s s " E X P .T I H E " a n d t h e e r P o -
sure time nÍIl be disPlaYed
To sxitch the enlargen lamP on
LI GHT
on off
- To enter f/stoP values, e.g. 16

By pressing the "F/SToP" keY'
F / S T OP
the f/stop value xill be shoEn
on the centnal display and the
erposune time nill be changed
accordi ngl Y
- To trigger the erposure
http://slidepdf.com/reader/full/durst-laborator-1200-manual-eng
JO 58/121
O P T O - F U S / O P T O - E C U / O P T O - F U S - } I E I í O R Y / OIPNTTOE-NP/ O P T O - 1 ' I
11.2. operation
Exposure tines are autonatically con.êcted upon chang)n3
lnuargens i f i xc oa nt i'ot n b e f accotm

o rp e nosr a ft /esdt .o p v a l u e s . R e c i p r o c i l y f a i -
To achieve this, keep exposure times con stant by changing
f/stop values.
4.3. Connecting a roll-paper easel
The OPTO-TIH t.imer has an interlace for Lhe conneetion

of roll-paper easels.
Use the 0PTO-FAL Fall mountj.ng to attach the basic unit

to the rall ( see oPTo-FAL operating insLructions).
For the electrical connections see ill. 1
J(
O P T O - F ]S / O P T O - E C I J O PT O - F I ] S - } , Í E H O R Ï /O PT O PR I T T E R / O P O - T I H
@ Horns:
Enlarger Iamp 0N/OFF and,.EXpOSE.. functions can only
be conLrolled from the roll-paper eascl.
If display indicaces:
'I'HIT IH FOCI'S
PRESS STOP OR ADJUST SIZE'
press "STOP" key before snitching the enlarger lamp
on or off or before triggerj.n6 an exposure.
Fhen making exposures in series, sritch off the cont,rol

panel Light by Íneans of sÍitch (33)
/k/
0 r--@tI
5. LEHS DATA SIEET
,ens type Nomi nal

focal IAecnt .gut ah l faocacaol r - B
b eBt nd ei setna n c e
I eng th ding to lens pri nci paI
manufac ture r pl anes
l B o d a g o n1 : 5 , b a l t f = 50 f = 5o,4 - o,67
II
lRodagon 1: 4 f = 50 f = 5o,1 + 2,BO
IS o d a g o n 1 : 2 , I
f = 50 f = 50,1 - 2,80
Rodagon :5,6 alt e= 60 f = 6 1 r6 - o,80
Rodagon 1: 4 f = 60 f = 61,8 - 1,92
Rodagon :5,6 alt f = 80 f = 81,2 - 1,70
Rodagon1: 5, 6 f = 80 f = 81 - 2,46
Rodagon l: q f :80 | = 81,2 - 2,46
lodagon 1: 5, 6 f = 105 f = 106,4 - 1,65
l o d a g o n * G1 : 5 , 6 | = 105 f = 10q,2 - 2'50
lodagon 'l: 5, 6 f = 135 f = 135,7 - 2,45
l o d a g o n1 : 5 , 6 a l t | = 150 f = 150,6 - 3,30
38
O P T O - F I ' S / O P T O - C U / O P T O - F U S - H E H O R Y / O P T O _ P RI IT E N / O P O - T I X
,ens tYPe Nomi na I Actua] focal glI di stanee

focal l engLh accor- bêtHeen
I ength ding to lens pri nci pal
manufacturer planes
lndrcnn 'l'E h
| = 150 | = 150,3 2,35
lodagon-G 1: !, 6 F = 1qn f ='1116,6
lodagon 1:5,6 alt f = 180 f = 182,8 4, OO
lodagon 1: 5! 6 f = 1Bo f = 182,5 3,22
l porodagon 1 2, I f = 50 f = 50,2 o, 17
iporodagon 1: 4 f = go f = 91,bo 1,98
=
)omponon 1: 2,8 r= 50 f 52,7 b' 5
)omponon 1: 5,6 f = 80 f = 7C,8 o,30
lomponon 1: 5, 6 f = 10o f = 102,2 2,4O
lomponon 1: 5,6 | = 135 f = 135, ) 3,0o
lonrponon 1: 5, 6 f = 150 a = 1qn q

3, 30
lomponon 1: 5, 6 f = 180 f = 18t), 3, go

'l
:1-Nikkon 1: 2, I l= 50 f = C? 13,90
:I-Hikkor 1: 4 f = 50 f = 51 6 + a cn
;t-llikkor 1:2, I f = 62,9 5, oo
;l -lli kkor 1 4 l. ?5 f -'- 75,O t 2,70
:l-Nikkor 1: 5, 6 f = 80 f = 80,1 3,30
il -Ni kkor 1 5, b f = 105 f = 105,5 + o, go
ll -Ni kkor 1 5, 6 f = 135 f ='r35,o 2,2.O
il-ilikkor 1: 5, 6 f = 150 1='lgo,o 2,40

iI -lli kkor 1: 5, 6 | = 180 f = 180,O o' 30
po EI -lli kkon 1 5, 6 f = 105 r = 104,8 2.8r1
3C
O PT O - F I ' S / OPT O - E C U O P T O - FU S - H E HO RY , /O P T O - PR I } I T E R / OPT O - T I H
6. ERRORS ÀND TIIEIR CAUSES
}IU}IBER TOO SI,ÍALL PRESS CLEAR

IIIJHBERTOO LARGE PRESS CLEAR
Cause: number input too small or too large.
Bemedy: t press 'CLEAR' key and enter neB number
N O T A C O D EP R E S SC L E A R
Cause: a ligure being smallen tltan 0O1 or largen than

008 has been entered and the "START" key pressed
Remedy: * press 'CLEAR" and enter C O D Eo o b o n c e m o r e
N O T F / S T O P P R E S SC L E A R
Cause: the number has been entered is not nithin the

f/stop range
ReÍnedy: * press "CLEAR" key and enter neF f/st.op
T I H E R O V E R F L O Í R E S SC L E A R
Cause: erposure time longer than 999 seconds
Remedy: * pness 'CLEAR" key and enter higher f/stop

value or smaller Ínagnification factor
}íAGIT.OUT O F R A N G E , P R S S SY E S , E N T E R m
Cause: magnificat,ion factor either Loo small or

too large
Rê nÊdy: ^ press "YES" key and enter nex magnification factor
40
O P T O - F t ' S / O P T O - E C U / O P T O - F I ' S - H E H O R Y /O P T O - P R I N T E N / O P T O - T I I ' Í
7. TECSIíÏCAL DATA
channels '. 7
Number of lens
Time required for Program-

mingalens : appror.5minutes
Recommended lens type : Rodênstock RoflAcoll

Schneider c0HPolloll
}IIKOH EI. NIKKOR
SetÈing and repêatabilitY

aceuracy of lens setting : o.01 mm
construction : nodular, suitable for

retrofitÈing
Number of xorking metories : 1 - 50 fon storing filtration,

( oPTo-FI'S-|íE!íORÏ version) densi lv, exposure time, lens
channel, f/sLoP, magnilication
facton, film carrier number'
negative and Positive varia-
tor val ues
NV range : t 9,99 mm
PV range : i 999,9 mm
OPTo-TIH exposure timer range : O' 1 - 999 seeonds
TIXER contact rating i5AÁax/220VÀCHar
R O L L - O XI N T E N F A C ; only on OPTO-ïIH
InpuL range of filter densitY

units for OPTO-FUS-HEHROY 1 r. 127
Durst products ane being constantly developed to the latest-

sLate of the art. Illustrations and descriptions al'e there-
fore s u b j e c t t o c h a n g e .
41
O P O - T U S /O P T O - E C U , /P T O - F U S - HH O Ï / OPT O _PR I N T E R /O P O - T I T í
8. SUPPLEHENT
8.1. Descript ion of contnols
LENS T o i n d i c a t e l e n s c h a n n e l be i n g u s e d ( ? m a x . ) . N o .
O O- O O 1, 2, 3 ].ens channels may be programmed nice,
1 2 3 4 once xihh OPTO-oNO nd once Fith OPTO-TRIS.
CARRIER To indicate film carrier being used.

oooo
12 3 4
mr
NV For thj.ckness diffenential compensation of filn
original (e.9. top Layen of internegatives). In-
put in mínr nput range of t 9,99 mm. If the value
to be entered is not knoxn, enter code 003 ( see
p a g e 13 )
mr
For thickness differential compensations on the
pnoiection pJ.ane ( e. g. erposure easels, LABoH
unit tabIe, rol,L-paper easel etc.). Input in rnrn,
input nange of ! 999,9 nm. If the value to be
entered is not knoFn, enter code O04 (see page 14)
ll To enter film size value ( edge length).

|/-.---.-1|
Itl
P To enter the desired projection size (edge Iength).

t---Í
It ,t
l-l
m To ênter the desired magnificatj.on facton.

t-l
t\ /l
42
/ T O _ P R I I T E R , / O P T O _I H
O P T O - F U S / O P T O - E C U / O P T O - F U S - H E H O R YP
% To enter the desired nagnif ication lacLor in

í/- -----j percentage va l u e s.
fin
To caIl up the desired lens channel
tmt
CARRIER To call up the different fil.n carriers.
r=-l
H E A D A DJ U S T T o a d j u st e nl ar ge r h ea d h e i g h t ( slor speed)
mlml
To adjust Iens stage height in thê manual
operaLing mode ( slor speed)
SI Z E/ LEIIS
mlt-r
AD J U S T
RAPID If pressed simultaneously xith the "EEÁD AD'JltsT"

keys, this key pernits quick enlarger head height
adjustment
if pressed simultaneously Fi Lh the "SIZE/LEllS
ADJUST" keys, this key permits the quick Iens
stage height adjustment.
START To set magnification factors in the AF mode

to actuate code numbers OO1 t o 008
FILH CIIANGEPOSITION
For quick and simple film orj.ginal changes. The

enlarger head moves Eo an e a si l y a cce ssi b l e height
for the sitting user.
P hr ee ses n tl ha er g e" S
T r ThAenaTd" rkeetyu:r n s to the previorrs
settinc and Í'ocuses.
43
O PT O - F U S / O P T O - E C I ] / O PT O - F U S - } íE H O R Y /O PT O - P R I I { T E R / O P T O -T I } í
001 - 008 CODE SYSTEX (see descniption on page 4).
STO - To stop the motonized enlarger head and lens

stage adjustment after having pressed the
"START" or
- t o l o c k a f o" cF uI LsI í s C
e tHt iAnHg C E O S I T I O I t " keys
NO - to ansHer questions ol the user's guide
- to interrupt an erposure
E N TE R - To terminate the lnput of a figure

- permits print-ouÈ of printing dat.a on the
data printen
- to ansFer questions of the user's guide
YES/PRINT
STORE To store aII printing data ( see page 29)

to count dorn STEP numbêrs, only for CODE
srEP I l-l 001, 003, 00r1, o05, o06! o07, 0o8
l\---Jl
I
REqA L To call up already stored printing data

b o s k i p S T E P n u n b e r s , o n l y f o r C O D EO O 2
srEPI F:.1
DISP AY To sxitch off control p a n e . 1 ,l l u m i n a t i o n and

n f-------ffi| r background Iighting of dÍsplay
DiÍnmer or the display's background lighting

w
x$t
OPTO HOT
Dimmer for control panel illumination
Operating manual
DURST OPTOCOH
cLs5o1 YLS5O1
VARIPOINT 12OO F E H O K I TB / T
C L S / V L S /V A B I P O I X T / F E H O K Í TB I I
Page
ESCRI PTI ONS 4
' 1, 1 . The outfit 5

1.1.1. CLS 501 5
1. 1. 2. YLS 501
1. 1. 3. VABIPOINT 20O 5
1.1.4. FEHOKIT R 6
' 1. 2 , Technical da È,a b
1. 2. 1. CLS 501 b
1. 2. 2. VLS 501 o
1. 2. 3. V A R I P 0 I N T ,2t 0 0 7
1. 2. 4. F E X O K I TB F
2. E E F O RS T A À T ] N GU P T I E E } I L A R G E R E A D 7
2,1. Cleani.ng
2.2. Fltti,ng the en.Larger }amp 7
2. 2. 1. CLS 501 / YLS 501 I

2 . 2 , 2 . V A R I P O I N T 1 2 O O , / F E } T O K I TB 8 I
2.3. Electrical connections for enlarger head I
2.3.1. cLS 501 / YLS 501 9

2 . 3 . 2 . Y A R I P 0 I N T 12 O O 9
2 . 3 . 3 . F E } í O K Ï TB f l 10
2.q. Fittlng the mixing boxes lo
2. q.1. CLS 501 / YLS 5O1 10
2.5. Replacing the diffuser 11
2.6. Fitting the condenser housing
CLS/VLS/VÀRIPOIIIÏ/FEHOKIT B , /F
Sei hê
2.6.1 FEHOKIT BB / V A R I P O I I I T 12 O O
Fitti,ng the condensers 12
S TA R ïI H G I IP T H E E I L I R G E R f l E A D
3.1. Colour enlarging nith the cLS 5O'l
3. 1. 1. Filter and density control setLings 1?-

3. 1. 2. Supplenentany filters 14
3.1.3. f,hite-light setting 14
J. 1. Bl ack-and-Fhi. t.e enlarging ÍiLh C L S 5 0 1V L 5 5 O 1
J. Z- | Bl ack-and-chi t . e e n l a r g e m e nt s u s i n g f i r e d - 15
contrast paper
B ] a c k - a n d - x h i . t e e n l . a r g e m e nt s u s i n g v a r i a b l e - 16
contrast paper
Black-and-nhite enlarging Fith VARIPoINT 12o0
3.4 Black-and-xhite enlarging xith FEHoKIT B/H
4. HA TTEIAHCE
q. 1 Ca e
q ÁCCESSORYRAI{GE
qí cls 501 / vls 501
). z, VARIPOIHT 12OO
<2 FEIíOKIT Bf
C L S / V L S / V A R I P O I I { T , /F E } I O T I T B , /F
D E S C R I PT I O N S
The enlarger heads dealt n i t h i n t h i s o p e r a t i . ng m a n u a l m a y

be mounted either on the L Á B O R A T O R2 0 O o r o P T O C o H n l a r g e r .
^ D I ' R S T C L S 5 O1 Colour hêad nith perfectly even i.l.lumination

thanks to direct lighting system. líaximum
output for each forrnat from 24136 mm up to
4x5 in. iiÈh aid of special Ínixing bores.
Appl. ca ti on: For cusbom print,s made from professional

photography film originals ( portraits,
advertÍsing, landscape rork).
* D U R S TV L S 5 0 1 D i f f u s e d i l l u m i n a t io n systen for black-and-

Íhite enl.argj.ng using variable-c ontrast pa-
pens. The contrast is continuously adjusled
Íith a control knob. Thê system provides
a l s o a u t om a t i c d e n s i t y c o m p e n s a t i o n.
Application: Quick and easy erposures oD variable-

contrast on flired-contrast ( black-and-
xhite) paper,
i VARIPOIHT 12OO C o n d e n s e r i l l . u m i n a ti o n s y s t e m u s i n g p o i n t
source oP Iight for razor-sharp rendering
of detaiLs and increased cont,nast ( see iIl.
Àpplication: Fon printÍng negatives Iacking contrast

and electron-nicroscope negati.ves.
C L S / V L S / V A R I P O I } I T l F E H O KB
I ,/
^ F E H O X I TB / F - Condenser illuminabion system

using opal lamps-
ApplÍcaLj-on: - For pninting flat black-and-Hhite ne-

gatives and for making reproductions .
l. 1. The outfit
' l. 1 . 1 . C L S
5O1
t Colour head Fith adapter
* 25O n/2\ V tungsten-hal ogen lamp
* 10r12,5 cm ( 4t5 in. ) miting bor
^ Transformer or voltage stabilizer
Durst-codes: C o L IK I T 1 2 O 1 T n 1 1O
CoLIKIT 1201 ES 110 COLIKIT1201 Tn 220
coLIKrT 1201 ES 220 CoLINIT 1201 TR 2qO
1. 1. 2. VLS 5O1
* Diffused-ill umination housing complete nith adapter

* ?5O fl/24 V tungsten-halo6en Ianp
* 10r'12.5 cm (4r5 in.) niring bor
*
Transformer
Durst codes: VALïXIT 1201 / 11O
VALIKIT 1201 / 22O VALIKIT 1201 / 24O
1 . 1 . 3 . V A R T P O T N T2 0 0
^ Condenser dome complete xith adapter

* Condenser housÍng
* one each surface-coated FEtlOC0N51 T/FEHoCOI| 52 T condensers
(condenser combÍnation and film size chart on pages 18, 1g)
i 100 F,/12 V point light lamp
* Regulating transformer
^ 2 surface-coated filn carrien glasses
* 'l surface-coaLed deflection mirror
Durst codes:
POINTKITAH 110 P O I H T K I TE I ] 2 4 0
P O I N T K T TE 2 2 O POIHTKITSÀA 240
CLS/ VLS/ VARI POINT/FEI{OKIT B/ R
1 . 1 . 4 . FEIíOKÍ B/ [
Co n d e n se r d o n e co mp l e te xi th ada pLer
Condensêr housing
0 n e e a c h F E I í 0 C 0 N1 5 1 / F 8 l í O C o N 1 ! 2 c o n d e n s e r ( c o n d e n -
s e r c o m b i . n a t , i o na n d f i l n s i z e c h a r t o n p a g e s 2 0 , 2 1 )
150 H opal lamp
DursÈ codes:
F E } I O K I TA X 1 1 O FEHOKIT Eg 22O
FEHOKIT EI' 2qO FE}íOKIT SAA 24O
1.2. TECRNICALDATA
1. 2. 1. CLS 5o1
Light source 25O X/"tl I tungsten-balogen lamp

Hains supply : - via TRA 50O transformer: 110/12O Y.
22O V or 240 V/5O-6O Bz or via
- stabilized transformer EST 50O:
110-140 Y or 180-260 Y/5O-6O Ez /
output, voltage: 2q 1 ! 2l
Fi I ters : fyie LI lt oexr ,s m a g e n t a a n d c y a n d l c h r o i c
Filter densitles : 130 densitometr ic units (=D 1.3)
Suppl ementary f i.l. er: a p p r o r . 4 5 y e l l o Í / 1 5 n a 8 e n t a
Densj,ty control : 0-6O densitometric units (=D 0.b)
Di mensions 53O t 29O r 3OO nm
Nei ght appror. 1 6 kg
1.2.2. YLS 501
Light source 2O5 fl/24 Y tungsten-halogên laÍnp

Xains supply via TRA 500 transforner: 'l10/12O 1,
22O V or 24O Y/5O-60 Ez
ContrasL range from soft to hard
D i m e n s io n s 450 r 290 r 2?o mm
Fei ght appror. I kg
CLS/VLS/VARIPOIHT/FE}{OKIT B/F
1 . 2 . 3 . V A n T P O T N T2 0 0
Llght rourcG : 10O N/12 V point light lamp

Hains supply : via VABICoNTRoL 2oo transformer:
1OO/11O/'l20/22O/2tt9 5O-6O 8z
continuously adjustable output
voltage from O to 12 V
Porer consunption : appror. 150 VA
líet relght : appror. 12 kg
gondensers, deflec-
tion [|1ffor, film
carrler Sla3ses : special surface coating
1. 2. 4. FEHO(IT BF
LighL source : 15O F opaL lamp

líains supply : 110, 220 and 24O V
Lighting system : via deflection mirror and condenser.s
Filter drarer : 12O r 12O nrm
Dimensions : 340 x 295 r 19O cm
fleight : appror. 9.80 kg
2. B E F O R ES T A N T I } I G ' P T S E E N L A R G E R E A D
2. 'l. Cl eani ng
Before agsernbly clean all conponents rith a cloth
2.2. Fittlng the enlarger lamp
C A I T T I O N :S X I T C g o F F T f l E 0 N I T B E F o R E
REPLACITC EE LAHP
CLS/VLS/VARIPOINT/FEIíOKIT B/ÍI
2 . 2 . 1 . cLS 501 / VLS 501
Open Èhe .l,amphouse over ( 1O)

by pressing the retaining
studs (11)
líount the tunSsten-halogen 17

lamp (12) on the lamp fitbing
(13) and push it underneath 18
the retaining springs (1q) 15
Take care never to touch the

lnside of the reflector
C l o s e ' I a m p h o u s ec o v e r ( 1 0 )
by pressing the netaj,ning
studs (11)
10
2.2.2. VARIPOIHT 2OO/FEXOKIT F
11
* Undo atch (15) 13

14
12
* LlfL off lamphouse cover (16)
* Screx opal lamp or point

light lamp (17) inLo lamp
fitting ( 18 )
CLS/ VLS/ VARI POI }ITl FET,IOKIÍ B fl
. A. Electrical connecÈions for enlargèr head
2.3. I c l s 5 o1 / v L s 5 o 1
Connect plug ( 19) Íith

socket ( 20)
If you are using the OPTo-

TIll-equipped unit v ersion,
connect plug (21) xith
socket ( 22)
If unit version xithout oPTO-

TIX is usedr connect plug
( 2'l xit,h thê TIilEn oUTPUT
socket of your erposure tiíner
( d i t t o l f t h e L À B O R A T O R2 O O
ls used)
2 . 3 . ? . VANIPOINT 2OO
* Connect plug ( 24) xith

socket ( 25)
If OPTO-TIlí-equipped unit
version 1s used, connect
plug (26) rith sockeÈ (22)
lf unit versi.on Bithout

0PTO-TIl'l s used, conhect 4 25
plug ( 2ó) xith the TIHER
OUTPUT ocket of your ex-
posure timer (ditto if the
L A E o R A T O R2 0 O i s u s e d )
CLS/VLS/VARIPOINT/FE}íOKIT B/N
2 .3 . 3 . FE}íOKI BR
tí
I
I
I8 OPTO-TIl'l-equipped unit I )
v ê n s i o n is u s e d , c o n n e c t lltlltllllllllllltl
plug ( 23) rith socket ( 22) rll
23
If unit version xithout
OPTO-TIH s used, connect
plug ( 23) Fith t,he TIHER
OtlTP0T sockêt of your er-
posure timer (ditto if the
LABoRAToB 20O is used)
2.4. Fitting t.he miring bores
2. q.1. CLS 501 / YLS 501
^ Push catches ( 34) forxard
Push the niring bor ( 35) rith

the four ret,aining stud3 ( 36)
into the cutout in the catces
( 3tt)
À Push the catches ( 34) back
CLS/VLS/VARIPOIIIT/FEHOKIT B/ H
)q Beplacing the diffuser
* Renove miring bor
Push retaining springs (

a n d r e m o v e t h e i n n e r n i x i3n?g) Jó
box ( 38) 3
FElroBor q50 N
* LifÈ off retaining springs

( 39) and replace difluser
( q0)
FEIíOBOX 9 N / 66 N
^ Beplace diffuser ( 4O) after
undoing scrers (q1)
NoTE: the inner mixing box can

be fitted either vertÍcalty
or horizontally.
2. b. Fi ttj.ng the condenser housing
2.6.1. FEHOKIT BT / VANIPOINT 12OO
i Push catches ( ll2) forrard
Push condenser housing ( 43)

rith t,he foun retaining studs
(44) into the cutouts in the
catches ( 42)
* Push the cacches (42) back
CLS/VLS/9ARIPOINT/FEHOKIT B/X
2.?. Fitting the condensens
( and slide
O p e n c o v
in condensers e r 4 5 )
( 46)
r CLose cover ( 45)
N0TE: condenser conbinatÍons
FB|{OKIT BF see pages 20, 21

VARIPOIIIT 20o see pages 18' 19
S T A R T T N C P T E E E } I L A R G E RI E A D
J. r. Colour enlarging Fith thê CLS 5O1
3.1,1. Fllter and density control setLlngs
6 85
* Filter controls
81 yellon
82 rnagenta
93 cyan
Se ti ngs:
continuously from 0 up to 130
densitonetric values
C L S / V L S / V A R I P OI N T / F E T l O K I T B / R
Filter value comparigon table
FiIter values
Du st d e n s i - C C l C Pd e n s i - CIBA densl- ICFA denni-
ti es ties Lles ti es
0 0 o o
10 15 15 20
20 3o 30 ,10
3o 45 q5 60
40 60 60 80
50 75 100
60 90 90 120
70 105 105 140
80 12íJ 120 160
go 135 135 180
100 150 150 200
110 165 165 22 0
12(l 'l Bo 180 2qo
130 1C5 195 26 0
8q density control
Setti ngs:
continuously PnomO up to 6o
Comparison table
Densi ty va-
lueg of den- Erposure change in lens stops
sity control
00 íorking a p e r t u r e o f l e ns
15 1/2 stop smalfer lhan norking aperture
3O 1 stop smaller than torki.ng aperture
45 1 1,/2 stops smallen than Forking aperture
60 2 stops smaller than Forking apÊrttrre
C L S . /V L S / V A R I P O I N T / F E I , í O K I T B,/H
8 9 A p e r t u r e f o n s c a L e i L lu m i n a E i , o n
6 OJ
3. 1, 2. Supplementary lilter
If you rant to increase your

yellox and nagenta liltratÍon,
push lever ( 86) to
settÍng. This causes the supple-
nentary filter (q5 Y, 15 H) to
sïing Ínto the light path.
3. 1. 3. Xhite-light setting
By pushing the lever ( 85) to the

"OUT" setting, eilters and den-
sity control sxi.ng out of the
ligbt path.
Signal ( 90) ri11 light up.
CLS/VLS/VARIPOINT/FEHOKIT B/H
3.2. Black-and-rhite enlarging rith cLs 501 / vls 501
using fixed-contrasb PaPer

3. 2- 1. BIack-and-rhite enlargements
c L s 5 01
* Turn a1l colour head fillen controls to zeno' The
continuously adiustable density control may hoi-
ever be used also for black-and-rhitê printing'
vLs 501
^ Tuin filter control knob ('l0o)
to the 2.5 (= rhite light) set-
ting, according to scale 1o1.
Set lever (1O2) to the "PoS.

ItANUAL" setting to achieve
marimum light ou!Put.
102
CLS/ vL5/VARI POÍ lTi FEiI0KIT I I i{
BIack-and-xhrte enlargemenLs usrng varrable-con-

lrast paper
vLs 501
Turn knob 10o) to the desi-
red contrast ( O to 5) seLtj. ng
Set Iever ( 1O2) to Lhe auto-
háti ^ êatti ha
Ad,/antage of using variable-

contrast paper:
Constant exposures
- thanks t,o automatlc densi.-
ty control
ilith Iever ( 102) you ínay sríing Ehe den-

sitT control ouL of the Iight paLh.
e ^h r F a < f ^h à n d É <
T O I N C R E A S EC O I I T R A S T
- turn knob (1O0) from 2.5 Lo
5, according to scaJ,e 101
* TO REDUCE O}ITRAST
- t u r n k n o b ( 1O 0 ) f r o m 2 . 5 t o
0, according to scale 101
cLS 501
* SetLing the desired conLrast ( 0 Èo q)
- by turning in the yelloí and the magenta
filters ( see folloHing chart)
NOT : incre3sing the yellow fj.ltration resulLs in a IoHer

contrast,i rncreaslng Lhe magenta filtrat.ion makes
for higher contrasl.
C L S / V t . : i . / V À n I P O I l l/ F [ l ' 1 o K I r B , Í {
CoIour head fi I !en colour hef,d filtel.

- <êtfi htê lnr. Tl Fn- grada - cêthi ho= f ^. YÍln4r
Srada
tion SPEED HULTICNÀDE I ti.on POLÍCOI{TNAST T
Y H c Y H c
0 37 0 70 4
0,5 4g lt6 o,5 )o 1r)
1 34 )o 1 q7 1b
1q 26 62 1,5 JY 24
19 68 2
2,5 15 77 2? 3C
3 86 3 rl 4b
103 B3
4 120 4 130
3.3. BIack-and-Hhite enlar3ing írth VÁRIPoIllT 12O0
Check for e,/eness of illumination

^ Sritch on enlarger Iamp
For unj.t version equipped fliLh OPTO-TIl{

* Press the "LIcBT" key
À Open lens draplrragm frilly
Í rmn .ênf êri nr'
fa there ane shadons on the base-

hnard ^ênf r'ê thê I àmh rc lnl I nuc.
^ Turn knobs ( 103) and ( 105) until

nnnipnt i nn i q fF9e oC shadors
*
Turn Lamp and adjust horizontally
103 : lo.i"ontaI adJustment.
10! : v".gi"aI adjustmenL
C t : . / V L S / v r l R I P 0 I l l T l F E I í O K I T 8 . /H
Light inlensit.y adjustmen!

^ Sxi Lch on enlarger Iamp
Fon unrt vension equipped nilh 0PT0-TIIí

A Press the "LICHT" key
^ Adjust lj.ght intensiLy by t,urning

conlrol ( 107)
NOTE: Do noL stop doFn the lens!
Condenser combination table for VARIP0IHT 1200 used tsith OPTOC0H
ocal Lensboard Adapter inear magnifi- EEHOCON

enght Film for aLion factonsÀ conden-
n mm sLze oPTO- Ul{0 OPTO-TRI5 5er com-
ln. max binatior
150 4x5" LAPLA42 HORI {G 42 Q.7x 1,2x 152 ï

9x12 cn or or | )1 |
6x7 / L A P L A5 O directly
6x9cm
't.2x 7. 3x r)1 |
151 T
go 6xb cm LAPLA39 OPTORIIIG o.3x 0.9x 152 T

753e 151 T
1.0x 1. JL 151 T
tlr I
2. 4x 15. 80 T
60 32x45 mm SETOP A OPTORING 2. 1x 21 5x 607

icrofi.ch€ 2 A ? O 15 3 9
1.0x 2.0x 80 T
qn 2 4 x 3 6 m Í n S ET O PL . q OPTORING 0.8x 2. ox 80 T
2839 1q o
2. 1x zo. 0x qn T
* indicaÈive values
CLll, VLS,'vÀnIPOIllTr FEI'IOKII B
combl nation table for VÀRIPOÏllT 12Ot-) setl Rith LAB0R

Condenser
LOCaI tllm Linear m,1gn1fi.. FEl.ÍO{tO l

Lensboal'd cation facLor's^ crln,len:er
lengLh
conrbinatio
I n mm
ml n. ma
15O mm LAPLA 2 b.5x

or 151 T
n o L r Il c 5 0 7 1
2.5x 1 lt .5 Í g0 T
UU MíI 6xb cm t.APLA 2
or
L À P L A3 ' ?
bO mm 32rtl5 mm LTlPLA 3? rl.ox O.0x oï

mlcroficht
2 t l x 3b m m LAPLÀ 3g 5.4x 3.0x 5íl T

5o mm
^ indicative values
enlarging HiLh FEIIoKIT B/H

3. q. Black-and-chite
of illuminatron
C
S ht sel ct ck h f oorn ee vn el anrêgsesr l a m P
For uni f versions equipped Hi t-h oPTO-TIH

Press !he "LIGHT" keY
Use fuII lens aPertllre
Lamp centeri ng:

If Lhere are thadoss on Lhe base-
board, cenlre !he IamP as folloss:
Turn knobs ( 103) and ( 110) unti t

projecllon i.s free of shadoís
Turn IamP round its axis and

adjust hocizontaLlY
CLS/VLS/ VÀRI POl NT,/FETIOKIT B/II
108 = horizontal adjustment

110 = vertical adjustmenL
Contrast control
- by using enlarging papers xith different gradations.
Condenser combination !abl.e for F E H O K I TB / Í u s e d F i t h O P T o C o H
roc L e n s b o a r d A d ap t e r Linear nagni I j . - iEHOCOIT

enght Film for ring for cation lac t ons * lond en-
nn size OPTO-IINO OPTO-TRI ten com-
ln. max. li na ti or
150 4x 5 " LAPLA 42 NORING 2 o,7x 1. 2x 152

on 152
LAPLA 5o di rec t1 y
1 .3 r 7. 3x 152
151
135 9 r 1 2 cm LAP A 39 fiORIHG 3 9 0.6x 1. 2t r5 2

or or 15 2
LAPLA )U H O R IN G 4 2
'152
1. 3r 3. ox
151
3 .1 r 8.3x 11 55 11
r05 ox / cm LÁPLA39 O P T O R II G O . 4 5 . ) 1 1 .2 r 151

6 x9 cm 7 q?a 151
100 6r? cm LÁPLA 39 OPTORIN G 0.4x 11.8x 151

6t9 cm (. )JY 151
80 4.516 cm LAPLA39 O PT O R I N G 0.3Í 2.5r 151

6rb cm 7. 539 151
2.6r 1 5 .l t r 80
2 4x 3 b mm S E T O P A OPTORIlG 0. 7x 1. 4r 80
1 8 x 2 4 mm 2 8 3 9 15 3 9
1 2 x . 1 7mm í qw
26x 50
80
t indicative values
CT,S/YLS/VARIPOÍ IT/FEHOKIT B/ F
condenser combination table foc FEIJoKIT B/ff used xith LIBoRllToR 1200
Focal Fllm Linear magnifi- EtíocoN

I engh t size Lens board cation factors * ondenser
in mm
nI n. max. mrn.
EHOTOB
l5O mm Itr5" LAPLA II2 .5x O.9x

OT 15'l
R0oI l r G 5 o ? 1
't52
135 nm 9r12 cm LAPLA42 .1r b.4x O.8x
or 151
LAPLI 39
.8r 8. ?r. o.55r 151

105 mm 66 xx 7q cc m
m LAPLA 39 151
100 mm bx7 cm L À P L A3 g .?x 9. ox 0.50Í 151

6x9 cm 15t
80 mm 6xb cm LAPLA 3g 2.5x 12.1 o.5ox 80
50 mm lqx36 mm LAPLA39 4x 1 9 .8 r 5o
80
35 m m 8 x 2 4 m m S E T O PA .Or 3 O .6 r 5O
2839 or 80
LAPLA39
ll. 0x qn
35 nm 1 2 x 1 7 m m S E T O PA 36.8r
2839 or 80
L A P L A3 9
t indicative values
Black-and-Fhite enlargements rith variable-contrast paper

Contrast control:
- insert variable-contrast filters ( 12x12 cm) in filter
draFer ( 111). Such filters are carried by photo sLores.
NOTE: yellox filLer = reduce contrast

magenba ilter = increase contrast
C L S / V L S / V A R I P O I H T , /F E H O K l T B / N
HAI I{TENAHCÊ
4.1. Care
Nhen Nhat to do ltotes
Daily Clean folloxing pants Use chamois Leatheri

- film canrien glasses antiseatic brush or
- Ienses cloth
- condenseFs
mj.xÍng bores
Every six Clean eolloning part.s To be handled by a

months - dust filter service engi^neer
-- colour filter of you. DursL Sole
special filt.ers for Agent in your
variable contrast paper counlry
- heat filter
C À U T I O N : A L f A Y S D I S C O H I E C TT B E
UHIT FROHTBE XAIIIS IF
- the lanphouse is openêd to reach

the Iight source for repains
- the J.amp s to be replaced
ACCESSORYRAIIGE
5. 1. CLS 501 / vLS 5o1
- FEHOBOX 9 H : for film sizes up to 6 x 9 cm

- FEHOBOX 6 H : for fj.lm sizes up to ó r ó cÍn
- F Ë H o B o X3 5 } { : for film sizes up to 24 r 36 mm
C L S / V L S , /V A R I P O I I I T / F E } í O K ] T B / R
NoTE: Fon shontening exposure tine use the less

dense diffusers, provided you can do xith
less than perfect coloun mixing.
5.2. V A R T P O I I T T2 O O
- FEIíoColl 50 T : Three-element condenser 0or

50 mm lenses
- FEIIOCON 0 T : ïhree-elenent condenser for

60 mm lenses
- FEIíOCON 80 T : Tro-elenent condenser for,

8O mm lenses
5. 3. F E H O K I TB B
- F E H O C O N0 : Txo-element condenser lor 6O and

8O mm enses
- FEHoCOII 0 : Supplementary condender for FEHoCtlll
8O fon 50 DrD enses
- F E H O C O N5 1 : Condenser for 1OOand 105 mm enses
- VARIPOÍNT 2OO Point source of light system
DursL pnoducts are being constantl.y developed to Lhe

latest state of the ànt. IllustrsLions and descriobions
arê therefore subject to change-
_É
=c
d
Operating nanual
DIIRST OPTOCOX
OPTOIIEG
OPTONEG
D E S C R IPT I O N S
OPTONEG are rotatable and arially adjust.able

sandrich-type film earriers.
J#
.A P LI CATI Oi l
117
r'Êl
<€è
u_
1 15 n
12---1j."
For glassless e n la r g in g of aIl f ilm s iz e s
from 35 mm up t o 1 0 r 1 2 . 5 c m ( q x 5 " )
BEFORE I}ISERTING TIE OPTO}IEGFILH CARRIER
Hount. oPTODAP-NEG nd oPTODAP-BOX

adapt.ers as follors:
* S l i de adapt er ( 112) into the unit
t P r es s adapt er ( 113) againsL the miring bor
7/15/2019 Durst Laborator 1200 Manual Eng O PT O I E G
INSERTIIIG SIIIGLE NECATIVES OR FILH STRIPS
Remove filn carrier (115)
PJ"ace negatlve in filn

carrier and eentre
Replace film carrien (115)
Á D V A N C I } T GI L H S T R I P S
x Push back sllde ( 116)
* Àdvance ilm strip

O:
* Push slide (116) forxard
once nore.
A C C E S S O R YR A } I G E
Fílm carriers
OPTONEG For film sizes

cod e
J) 24r36mn
rl 5 tl.5 r 6 cm
66 6t 6cm
67 6r7cm
69 bx9cm
92 I r 12 cn
q50 'lO r 12,5 cm (4r5")
for óther DfN on ASA standard
film sizes or special sizes
Film carrier support adapter 0PTODAP-NEG

Hiring box adapter OPTODA BOX
OperaLing manual
DI]RST OPTOCOH
FEHONEG
FEHO}IE
A PPL I C A T IO N
- Lo print, either rith or rithout glasses, all film oni gi nal

sizes from 35 nm up to 10 r 12,5 cm (4x5")
- fon regisLer rork
INSERTING INGLE NEGATIVES R FILH STRIPS
a Remove ilm carrier (77)
^ Insert negative in film canrien and centre

^ Replace filn carrier ( 77)
ÀDVANCINGFILI{ STRIPS
* Lift lever ( 78)
* Advance film strip
* Release lever ( 78)
F I T T I N G G L A S S L E S S A S K SO R F I L I I C A R R I E RG L A S S E S
* Remove ilm canrier (77)
* Open 0ilm canrj.er
i Push retaining springs (79)
i Fit desired format ínaskon glass and slide

back retaÍning spnings (79)
For fornat masks and glasses see accessory range on page
F E HO N C
D E S C R T P T I O I IO F X A S K I N G S T R I P S
The nasking strips' (80) use

avoids reflections.
NoTE: do not use the nasking strips for defining film

sizes or instead of the FEllOlíASK ormat masks.
A C C E S S O R YR A N G E :
- XIVALO register punch (for descniption see HMLo

operating oanua].)
FORHAT ASKS
FEHOHASK 5 N for 24 | 36 mm ilm sizes
FEHOHASK 5 N for 4,5 r b cn film sÍzes
F E H O } I A S K6 6 N for 6r b c n f i ln s i z e s
F E H O H A S K6 7 X for 6r Tcnfilmsizes
F E H O H A S X6 9 N for 6r 9cmfilmsizes
FEIIOHASK 92 !l for 9 | 12 cm film si.zes
F E } I O H A S K5 0 N for 1o Í 12,5 cm ( 4x5") film sizes
FEHOHASK flor other DIN and ASA slandard film
FEHOGLA standard filn carrier glass
FEHOGLA AN film carrier glass xith anti-Nexton treatment
Operating manual
DURST OPTOCO}I
oPTO-CnoP-sYsTElí
D u r s t GA 1 V 3 0 0 9 5e ) 5 / ' 8 7
O PT O - C R O P _S YS T E H
CONTENTS
Page
DESCRI TI O}IS 3
1. 1. OPTO-CROP-SÏSTEH J
1. 1. 1. 0PTO-CROP-ltASK 4
1. 1. 2. OPTO.CROP-CABRIER q
1. 1. 3. 0PT0-CRoP-DISPLAY 4
'l . 'l 0PT0-cBoP-FILE 4
. 4.
INSERTINC SINGLE ITEGÁTIVES OR TRANSPA-

RENCIES IN T8E OPTO-CROP-I{ASK
}IOI'NTING OPTODAP-NE G AND OPTODAP-8OX DAPTERS
I}ISERTI}IC OPTO-CNOP-},IASKS N THE FILH CARRIER
FITTITIG TEE FILH CARRTER
ACCESSORYRANGE
op To -cnoP - sYsT EH
1- DESCRIPTIONS
' 1. 1 . oPTo-CROP-SYSTEH is a neí filrn handling system lol'quick

and easY Processing of Your iobs-
0PTO-CROP-SYSTEIí is supplied rith:

'l. Format masks : OPTO_CROP-HASK
2. SandFich-type film
c a nr1 ers : OPTO-CROP_CÀNRIER
3. Display Fith light table : oPTO-CROP-SYSTEH
4. FiIe for storing
OPT _CROP.}íASK : oPTo-CROP-FILE
O PT O . C R O P S Y S T E } í
1 , 1 .1 , oPTo-CBoP-HASK - Format masks ( either nith or

xithout glasses) fon printing
all film sizes from 35 mmup
to 10 x 12.5 cm (4r5 in. )
Advantages:
i Simple cropping
r Quick and easy part enlargemênts
t Possibility fon recording data on the nasks
1.1,2. OPTO-CROP-CARRIER Rotatable and axially adjustable

sandÍich..type fj.lm carrier accep-
ting OPT0-CnOP-HASKS.
1.1.3. O P T O - C R O P - D I S P L A YO T P O - C R O P - l í A S Ko l d e r x i t h b u i l t - i n
light table to be used in the lab's
reception. Customers may glue their
negatives into the Dasks, note doxn
data and leave them rith the recep-
ti oni s .
1.1.4. OPTO-CROP-FILE - File for storing 0PTO-CR0P-HASKS.
0 PT O -C n O P S YS T E í
2. } Í S E R T I H C S I N G L E H E G A T I V E S O R T R A N S P A N E N C I EHS T I I E O P T O -
C N O PH ÀS K
Select OPTO-CRoP-llASK
matching your film size
crop negative area to be

enlarged or,
Íhen enlarging Particular

negative secÈions' use angle
c l o s e O P T O - C R o P - H A S Kn d
press tightly together
Fill in customer's mask

section
OPTO_CROP-SYSTET,I
J' } , I O U H T I G O P T O D A P - N E G A N D O P T O D A P - 8 O XD A P T E N S
* Push adapter (112) into the unit
Press adapter (113) against

the íni i ng bor
4. I IISERTING OPTO-CROP-}.ÍASKS I X T B E F I L H C A R R I E B
* open filn carrien
* Insert masks
* Close film carrier
O P O - C R O P .S YS T E H
FITTING THE FILH CARRIER
S l i d e f i l m c a r r i e r ( 11 7 ) i n t o t h e
unit. The fil.m carrier comes to
rest in the 90 degree angle posi-
tions ( vertical or transverse aris)
Crop
Slightly lift and rotate the film

carrler or a d j u s t ' i t axialLy
6. ACCESSORÏ RANGE
lla s ks
O P TO - C R O P H A S K FOR FI L}í SI ZES
18 r 24 ínm
24r36nm
J 4.5 r 6 cm
4 6r 6cn
5 6x 7cm
6 bx9cm
7 9 x 1 2 cm
I 1o x 12.5 cn
Fllm carrier slage adapter : OPTODAP-NEC
Hiring bor adapter OPTODAP-BOX
operating manual
DORST OPTOCOH
PEBIDAP
F E B ID A
CONTENTS
Pa g e
1. INTRODUCTTON J
2. XOUHTING EE ÀDAPTER
2 . '1 FitEing the BIHAEOX nixing bor and

BI 'lAC0N FEH0C0H O condensers
2 . 2 . condenger conbination table for Durst

O P T o C o } ' ío r t h e u s e o f D u r s t N E o N O N ,
S c h n e i d e r C o l í P o N o i lo n B o d e n s t o c k R o D A G o l l
lenses Fith aD opal lamp as light source
2.3. Fitting a glassless format mask or a

fil.n carrj.er glass
2.4. Descrlpt.lon of nasking strips
2.5. Accessory range for niring bores

BIIíANEC ilm carrier
2. ó. lccessory condensers
FEBIDAP
1, INTBODUCTION
The special FEBIDÀP adapter pernits quick and

easy processing of 35 mm and 12O/22O films. The
advantage of this filn carrier systen is the pos-
sibitity of rotating the film carri.er xith mixing
bor or condensers through 90 degrees, rhich is an
important feature xhen using roll-Paper easêIs.
HOI]NTING RE ÁDAPTEE
* nenove mlxing bor (35)
* Push catches ( 34) forÍard
* Place the adapter's top section (ó1)

rith the four retaining sLuds ( 63) in ^,
the cutouts in the catches (3{) n
J\
Push back catches ( 34)
66
ffi
(
* fnsert the adapter' s bottom section 62)
and secure Fith knunled-head screns ( 64)
F E B ID A P
2 .1. Fitting t h e B I H A B o Xm i : i n g bores and BIHACOII

/FEHoC0N 50 condensers
Push catches ( 65) forxard
Pl.aee the mi:ing bor ( bb) Bith

the trío retaining studs ( 6?) in
the cutouts of the catches ( 65)
Push back catches ( 65)
2 . 2 . Condenser coobination t a b l e f o r D u r s t o P T O C O Hf o r t h e u s e o f
Durst llEoIolf, Schneiden COllPONol{ r Rodenstock R 0 D A G 0 l { e n s e s
xith an opal lamp as light source 6B
Remove nternediate pant ( 68)

t,o avoid vignetting
Focal ,lagnif j.cation f ac t or r C o nd e ns e r c o r n -

I ength FiIm size binations tith
in mm i.n. * mar. x use of FEBIDAP
50 nrn 24r36mm o.7 \ 1.q r BI}íACON 8O
FEHOCON5 o
1.5 : 26r BIHÁCON 80
6O mn 32 x 45 Ínm 0.7 r 21 5 Í Brlracotí 75

m ic r o f i c h e
80 rn 6r 6cn 1. O r 15.4 r BI}íACON O

4.5 r 6 cm
00 nm 6x 9cm 2.? \ 1 ' , 18 r BItíÁCoX 80

6r 7cil
05 mÍn br 9cm 2.7 x 11.2 r BIHACON BO

6r 7cm
r indicative values
P E B ID A P
2.3. Fitting a g l a s s l e s s format mask or a film car!'ier glass
, a:a
i Remove and open fÍl.m carrier
* Plàce desj.red fonmat

nask or film B l a
carriers s l e s sg l a s s in
film carrien and push against
retaining sprilgs (b9)
2. 4. Dêscription of masking strips
The masking strips ( 70) avoid

the fornation of reflections
NoTE: do not use the masking

strips for defining film
sizes or instead of the
BIHEIíA formaL masks
2.5. Accessory r'ange for miring boxes and

BIHAHEG i Im canrier
BIHABOX 5 N: m i r i n g bor f o r l i l m s i z e s u p to ztt x 36 mrn
B IHA B O X 6 ll : miring box f o r f i l m s i z e s u p t o bx 6cm
BïHABOX 9 N: m i r i n g bor f o r f i l m sizes up Eo 6x 9cm
HOTE: For shortening exposure tinres you may use the less
dense diffusers, provided you can do lith le3s than
perfect colour mixing.
FEBI DAP
Film carrier gLasses
- LURIoGLÁ : standard film carrien glass

- BIXAGLAAlí : anti-ilerton film c àm i er glass
Glassless fonmat Ínasks
- BINEHA 35 : forÍnat mask for 2 q r 3 6 nm f i . l m s i z es
- B I I I E H A4 5 : format nask for 4.5 r 6 cm lilm sizes
- B I N E I í A6 6 : format mask for 6 r 6 cm film sizes

- BIlfEl{A 67 : format nask for 6 Í 7 cn fi}m s i z es
- B I H E H Aó 9 : fornat mask for 6 r I co film sizes
- B I I I E H AS : for all other film sizes and special sizes
- BIDIÁ : tnetal format mask fon mounted 35 mm ( 5x5 cm)
slides. To be used in place of the bottom
glass in the BIHAIEC film camier.
condensers
- B I H A C O I í8 0 : c o n d e n s e r f o r 2 t l r 3 6 m m , I l . 5 : 6 c m,
6rbcm, 6r?cm, 6rgcm filmsizes
- BIHACOIí 5 : condenser for 3 2 x { 5 m m ni c r of i c he
- FEHOCOI| 0 : condênser for 24 r 36 nm film s i z es
operaLing mánuaI
DUNST OPTOCOH
Lens holder / Lens panels
LENS PAHELS
CONTEIITS
Page
1. OPTO_UIIO SINGLE.LEÈS ROLDER 3
' l. 1 . O u E f i t
1.2, lrounting lenses ln requÍred 3

lens panels
1 . 3 . I í o u n t i n g t h e O P T O - U N oe n s h o l d e r q
1. q. llounting t,he ned fllter or the diffuser 4
OPTO-TRIS LENS TgRRET FOR HOI]I{-

TING TITREE LEIíSES
2 . 1 . 0utfi t 4
2 . 2 . Houneing lenses in required I ens 4

adapten rings
z. J. líounting the OPTO-TRIS ens t urre t )

2 . 4 . líounting the red Pilter or the di.ffusen
LENS PANNLS
1. OPTO-UI{O I }IGLE-LEIIS lOLDER
1. 1. 0utf1
OPTo-Ullo ens holder complete íith red fiILer
1.2. líounting lenses in required lens panels

F
f ool rl o m
r i no gu n t i nl egn sd i fpf ea rneenl ts a Ir ee n saev sa i loarb l f. oe c aa ls laecncgetshsso, r i et sh:e
_ SEIPLA ?539
- SETOPLA 839
_ LÁPLA 3 9 / L A P L Àq 2 / L A P L A5 0
ScneF your lens into the appropriate lens panel as shoxn

in lhe charh here beloí.
L ên s Threar Lens panel required
Rodagon 28 lí 39 SeipIa 7539

Componon 28 H39 seipla 7539
Rodagon 35 H39 Seipla ?539
CoÍnponon 35 H39 Seipla ?539
Rodagon 50 r't 39 Setopla 2839
Ap o - R o d a g o n 5 0 H39 Setopla 2839
Componon 5O H39 Setopla 2839
Nêonon 50 H39 Setopla 2839
El-Nikkor 5o H39 Setopla 2839
nodagon 80 lr 39 Lapla 39
Componon 80 H39 Lapla 39
Neonon 80 H39 Lapla 39
El-Nikkor 80 H39 Lapla 39
Apo-Rodagon BO lí 39 Lapl a 39
Rodagon 1 05 ll 39 Lapla 39
Componon 1OO H39 Lapla 39
Neonon 1 05 il3C Lapla 39
Bodagon I 35 H39 Lapla 39
Componon 1 35 x50 Lapla 5O
Rodagon 150 H50 Lapla 50
Componon 1 50 lí 42 Lapla 42
If the lens is fully retracted, the fEilOl{EG ilm carrier or
st hhee d FiEn B, I DbAePa

c a du as pe t eo rl xt hi teh p B
r oI lt lrAu ld{ iEnCg i l nr e a rcm
a rorsi et r l e nc sa n e' tl e m
b ee npt .l r -
This rill honever be no problem in all normal focusing set-
ti ngs.
LENS PANELS
r. J. líounting the OPTO-ttlÍo ens holder
Screr dorn lens holden (51) by

means of crosg head screxs ( 52)
Screr the Iens into the appropriate

lens panel (53) and fit same in the N
lens holder Dt )
51
Connect plug (54) rit,h sockeÈ (55)
1.4. líounting the red fi l te r or the dÍffuser
* Secure shaft. rith red fi l t,er (56) on

lens holder Fith locking screr (5?)
2. OPTO-TRTS LENS TURRET FOR }íOII}ITING THREE LE}ISES
2. 1. Outfit
OPTO-TRIS ens turret complete xith:

- 1 red filter
- one each adapter ring
_ OPTORING939
- oPToRTNC 539
-_ H
O oPRT lONRs I N G, 5 3 9
39
- SORING 2
- 12 spacer ringg
2 . 2 . l í ou n t i n g l e n s e s 1 n r e q u i r ê d lens adapt,er ri ngs
NOTE:
Pl,ace one or tno spacer rings betreen
lèns and OPT0RIIÍG o ensune the f-stop
numbers cone to resÈ on a sllghtly Ia-
teral position fon better visibilit.y
Screx lens into adapter ring (see

chart here beloÍ)
LENS PÁNELS
Lens adapter rlng chart for uslng dlfferent lenses in con.junction

nlth oPToNEG, oPTO-CBOP-CAnnrER, FEHo NEG a n d BI!'l ÀNEG i l m carriers
L e n s a d a p te r r i ng s r eq ui r ed
. en s Thread Ii Ih OPTOHEG/OP- Ri t,h EIHA}IEG

TOCNOPilEG/ E}íO- filn carrier
NEc filn carriers
RODAGO}Í 50 H39 o P T O R r r f c1 5 3 9 OPTORIHG 9 39

APO-RODAGOII5 o lr 39 o P T O R I i l c ' l5 3 9 OPTORINC g 39
coHP0Nol{ 50 lí 39 oPTORrrc 15 39 0PTORIT{C9 39
E L - I I I K K O R5 0 t{ 39 oPTORrlfG 5 39 OPTORING 9 39
NEONON 50 l{ 39 oPTonrl|c 15 39 O P T O R I N G9 3 9
c0HP0ilotf b0 tí 39 oPTOBTNC5 39 oPTORIIíG g 39
RODAGON 80 l' t 39 OPTORING,5 3 9 oPT0nrilc 7,539
ÀP O - B O D A G O 8} I0 H39 oPToRrnc 7,539 O P T O R I N G, 5 3 9
colíPoHoN 80 H39 o P T 0 R r l r c7 , 5 3 9 o P T O B T N C, 5 3 9
EL-NIKKOR O x39 OPTORING,539 OPTORING ,539
l{EoltoN 80 |í 39 O PT O R IN G,5 3 9 oPTORrlrc ,539
R O D A G O H1O 5 x3g OPTORÍNG,539 O P T O R I H G, 5 3 9
c o l l P o N o N 10 0 H39 0 P T O n T N G, 5 3 9 o P T O R Ir c 7 , 5 3 9
NEolf N 105 H3s OPTORING,539 O P T O B I N G, 5 3 9
R O D A C O H1 3 5 il 39 HORI íG 39 aonr Nc 39
coHPoNoN 35 x42 IOBING q2 FORIHC 42
R O D À G O i l1 5 0 H5o
c o r í P o N o N1 5 o x tt 2 [oRIilG q2 E O R IN G 42
l{o lens adapter ring is required. The lens can be screned

directly into the oPTo-TRIS lens turreE.
NoTE: short focal length lenses (shonter than 50 mm)

cannot be used in the OPTO-TRIS.
OPTO_TN S
t{50 0, lí65 x 0 , 75
1160 0.75
HORII{G OPIORIN tl
R O D A G IO OP'IOR]N l 9
150
H O R I N G2
A
^
OPIOBING ,5
A= Distanzring o 45 x o 39,2 6r
O= Distanzring O 52 | O 42,2 3x
D= Dis tanzrinq O 59 r O 50,2 3x
Hounting the OPTO-TRIS ens turret
Secure lens turret (58) by means

of cross head screxs ( 52)
Connect plug (54/1) xith socket (55) có

59
60
54-1
or the diffuser
52
Hounting the red filter
55
Secure shaft Fith red filten or diffuser

(59) on lens tunret Íith locking scren ( 60)
0perating manual
DIIRST 0PTOCOt{
OPTOXAL
OPTOH L
t. GENERAL OTE
D u r s t oPTo-[AL i s t,he FàIl-mount.ing

unit f or t he D u r s h OPToCo!'í nlargen.
Ápplication
Íhen usíng a roll-Paper easeL
Íhen makj.ng giant enlargenents

( ê. g. floor Projection)
T { O UNT IIIG O P T O - fl A L
* Nake sure lhe Íall is nithout uneveness.

Level out the nalI, if necessanY.
72--F
#,. -l--
ínl
I
* Hark drill holde positions 73
73
q;
OPTOFAL
Drill 1 0 m mh o l e s
and fit' dorels
A ttách plates (71) and ( 7?)

by means oP scrers ( 73)
Hount the enlarger head ( see ba-

sic unit operafing instructions)
Remove baseboard ( 3) and ship-

ping plate ( 8), if mounted
I F S E I P P I N GP L A T E 8 ) I S I I O T
}íOONTED, O }IOT TAKE THE UNIT
IN A EORIZOIITAL OSITIOII AS
T g E E I { L A R G E R E A DC Á H S T Í O O T
IIP EASILY
Lift unit Fith column (1) onto support

plate (?1) and secure Èop and bottoÍn
rith screxs ( 74)
Check the unit's vertical position, 71

Èhen tightên screFs ( 73) and ( 74) 73
llse a spirit level to check alignnent
OPTOHAL
C O H P O N E N T Sá N D U S E T S E R E O F
OPTO-flAL FOCI'SING ARH
- to program the autofocus
PLATE (71'
- serves as repositony for the

TRA 50O transforrner or the
EST 5O0 voltagê stabilizen.
The EPU 12OOpoxer supply
unit for 0PTo-AC 1201 and
ao rPeT ob- eCsotL -pEl P

a cLef do r o O
n Pt Th O
e -CoL
floon or in the botlon
d r a i e r o f t h e L A B O I ID E S X .
H O U } I T I T G E E F O C U S I N CA R H

Durst Laborator 1200 Manual Eng

Uploaded by

Copyright:

Available Formats

Durst Laborator 1200 Manual Eng

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Durst Laborator 1200 Manual Eng

Uploaded by

Copyright:

Available Formats

7/15/2019 Durst Laborator 1200 Manual Eng

DURST PRO USA, Inc.

Durst GA 1V30065e) 5/87

1. 1. The basic unit's outflt

PREPARIIIG gE BASIC UNIT 6

4. STARTTflG gP TSE BASIC UNTT f,ITIOIIT CONTROL PAIIEL 11

4.1. Electrical connections of renotê control 11

IIODULAR ON- lon matching unit eomponents to your

S C O P EO F A P - colour as rell as black-and-rh ite Fork,

SáFE ÁllD EFFICIEIIT 0PERÀTIOH depending on unit outfit

- by autoínat.ic prinL size determination and autofcreus

- autonatic erposure control

1. 1. The besic unlt's outlit

* OPTO EPU poner supply unit

i OPTO HOT motor uni!

* EI - SIilo ínains lead

* spannen íith gcreFs and tFo metal guides

oubfit including rolJ

1.4. Technical data

líai ns suppl y i 22O/ztIO V. 1OO/1'lO/'l20 V, 5o-6{-l llz

Stabilising range : +'tO I - 15 X

Poxer consunpbion : appror. ,lOO VÁ rnax. ( for outfÍt

Suggested ambient : 30 to 8oÍ relalive humidiLy, 25

Column height : l7O cm

Haxirnun height ( enlarger

head fully extended) : 19b cn

Ilsable baseboard area : 80 x 7o cm

Net Feight : appror. 54 kg

llagnif ication f actors

,ens Filn size i ni nun* maximum^ maximum*

Hhat conponent combinations /light sources are a v a i l a b le ?

COLOUB PRINTI}IG BLACK-À}ID-}IBITE PRI NTIHG

l[ oer.o.4cr2o1colouÍ vAHrPorNÍ.t2oo poinr

? PREPÀRING TIE BASIC UilIT

Before assembly cleàn all parts flith a cloth.

3.2 Hounitng the baseboard

Place the colutnn (1) and en-

Rold the baseboard (3) against

Tighten socket head cap screÍs

llounting the counterxeight spring's cover plate

Pl.acecover plate ( 47/1) on 47fl

Secure cover plate ( 47l1)

The txo counterre ighÈ springs

EnIar8er head líetal platês

Àu T 0 co L o B12 0 0 Ihsert 1 plate

Enlarger head fletal plates

3.5. Establlshing electrical. connecti ons

Cable ( A) rith "Enlarger Enc. " socket

For plugging the unit into the mains

First nount the enlarger head

For this proceed as aolloFs:

PIacê enlarger hêad on

Secure enlarger head by neans

l.6. SÈarting up the enl.arger head

See operating manual of enlangen head being used

- cls 5o1 / VLS 5O1 / VARIPOINT 12Oo / FEHOKIT Brf

3.7. FitLinB the film carrien

See operating manual of filn earrier being used

J.8. H ounLing lens holder and lens panels