Catalogue 2011 22

Digital Indicators • Data Loggers • Bus systems • Remote Inquiry • Temperature Probes • Alarm Protection Devices • Software • EASYBus
• Sensors
pH / Redox / Conductivity • Flow/ Flowrate • Level / Fill Level • Material Moisture • Temperature • Oxygen • Humidity • Pressure • etc.
Industrial measurement
MEASURING CONTROLLING REGULATING
2011
MADE IN GERMANY
The GREISINGER electronic GmbH was founded in Regenstauf on January 1, 1980 and has now
been existing for over 30 years.
Our aim is the development and pro-
duction of measuring and control equip-
ment including suitable sensors.
Production occupies a working area
of approx. 2250 m².
About 50 employees develop and
produce our high-quality but for all
that low priced devices using the
most up-to-date development, pro-
Greisinger electronic plant duction and inspection equipment.
The company owns a fully equipped screen cabin
(5 x 3 x 2.5 m) where EMC tests are performed already
during the development of new products.
Furthermore to mention is the 60 m² air-conditioned
calibration lab for calibration and adjustment of e.g. tem-
perature, pressure, humidity products.
For many applications, especially considering the ISO-
9000ff documented measurings are necessary.
All our references can be traced back to national refer-
ences and are permanently controlled.
Most of our products also can be ordered with Calibration
or DKD Certificates to fulfill your quality requirements ac-
Our EMC test laboratory cording to ISO9000.
More than 30 years GREISINGER electronic

Fair prices and high-quality products have made us a com-
pany to be reckoned with on the measuring device sector.
Our development has been steadily going upwards for the
past 30 years. Globally operating and well-known compa-
nies are now amongst our regular customers.
All our products are developed and produced in Germany
- the only way to ensure the high-quality standard of our
products. Our quality management system is certified ac-
cording to ISO 9001:2008 and additionally for potentially
explosive atmospheres according to EN 13980:2002.
Products intended for use in explosive atmospheres have to
comply the requirements of the Directive 94/9/EC („ATEX-
directive“) since July 1.st 2003.
Development, production and mar-
keting are certified according to
Directive 94/9/EC since May 1.st
2003. Several products are already
examined and certified according
to the Directive 94/9/EC.
2
Product overview
Handheld instrument
Service
Calibration, DKD 4
HANDHELD INSTRUMENTS (with sensors and accessories)

Temperature 5 - 11 Oxygen 30 - 31, 39
Display / Controller
Air humidity 12 - 15 Conductivity 32 - 33
Flow, Anemometer 12 - 13, 40 pH, redox 34 - 38
Hey temp. meas. probes 16 Phono 40
Material humidity 17 - 19 Software 41
Pressure 20 - 28 Accessories 42 - 43
Carbon monoxide 29
INDUSTRIAL MEASUREMENT
Logger / EASYBus
Display instruments for control panel mounting 44 - 53
Regulator for control panel mounting 46, 47, 50 - 55
Special construction, Power supply, accessories 56 - 57
Plug-on display 58 - 59
Panel-mounted Modules (Temperature, Pressure, Current, Voltage) 60
Data logger / EASYBus

Data logger (Temperature, Humidity, Standard signals, Frequency, air pressure) 61 - 65
Transmitter
EASYBus-sensor modules 46, 49 - 52, 63 - 65,
(Temperature, Humidity, Standard signals, CO2) 70 - 73, 78
EASYBus-Regulators (1-, 9- or. 20-channel) 46, 50 - 52, 74 - 75
EASYBus Accessories and Software 41, 66 - 67, 76 - 77
Transmitter
Transmitter 80 - 96
Temperature probe
Temperature, Humidity, Pressure, Conductivity, pH, Redox, O2, CO, CO2, Flow
Flow meter, Flow switch, Level switch, Rotational speed meter 97 - 102
Temperature probes
Pt100 / Pt1000, Thermocouples 103 - 117
Alarm / Schutz
Alarm- and Control devices (Liquid level, Leakage) 118 - 121
Alarm / Protection
Ex-Protection
Measuring instruments 20 - 25
Displays 44, 58
Transmitter 85, 86
Temperature probes 111
3
Calibration and Certificate all from one source
for return to national standards
1. Readjustment 2. Factory Calibration Certificate 3. DKD Calibration Certificate
After a longer period of use, it's DIN EN ISO 9000ff demands a The DKD Calibration Cer-
recommendable to send in the traceable calibration of meas- tificate always conforms to
devices (e.g. humidity) for re- uring and test equipment. This form, structure and proce-
adjustment. At this, the device calibration certifi-cate is a low- dures the standards and re-
will be fully checked up and priced alternative to the DKD quirements of the German
new adjusted, if required. Calibration Certificate. Calibration Service.
Which certificate will be required ?

Factory Calibration Certificate: could be deemed to be sufficient, if the devices acts as measuring and test equipment within
quality management systems according to DIN EN ISO 9000ff or similar, as long as there are not used as a standard. Further-
more there are some measurement categories, without possibility to get a DKD accreditation.
DKD-Calibration Certificate will be recommended for the recalibration of testing equipment which itself is used as a standard for
the monitoring of other measuring and test equipment. It's also possible that internal demands of the particular companies makes
a DKD Calibration Certificate necessary.
1. Readjustment: (without certificate of calibration) Readjsutment of the device

2. Factory calibration certificate:
Calibration certificates are available for all handheld instruments marked with the symbol WK .
Also possible for measuring transmitters resp. combinations of display instruments and sensors/transmitters.
Temperature: Conductivity:
Certificate of calibration WPT incl. 1 meas. point Certificate of calibration WPL3
additional meas. point (from -30 to +500°C) 3 points: ~147 μS/cm, ~1412 μS/cm, ~12,90 mS/cm
additional meas. point (>500 to 1300°C) up on request Certificate of calibration WPL10
10 points from 0.9 μS/cm to ~192 mS/cm
Certificate of calibration WPT2A
with standard values: 0°C / +70°C Ultrapure Water:
W
NE
Certificate of calibration WPT2B Certificate of calibration WPL3-RW
with standard values: 0°C / +37°C 3 points: ~2,50 μS/cm, ~7,00 μS/cm, ~15,00 μS/cm
Certificate of calibration WPT3 pH:

with standard values: -20°C / 0°C / +70°C W
NE
Certificate of calibration WPP3
Pressure: 3 points: 4,00 pH, 6,87 pH, 12,80 pH
Certificate of calibration WPD5 Certificate of calibration WPP10
5 points ascending, 5 points descending 10 points from 1.09 pH to 12.92 pH
Certificate of calibration WPD10 Atmospheric Oxygen:
10 points ascending, 10 points descending
Certificate of calibration WPO3
Humidity: 3 points: 0 / 20.9 / 100 % O2
Note: a replacement of the sensor, before issue the WPO3, is recommended for sensors with an age of one year!
Certificate of calibration WPF4
incl. standard-meas. values (approx. 20% / 40% / 60 / 80 %RH increasing and decreasing)
3. DKD calibration certificates: guiding price - exact costs on request.

Temperature: Humidity: (incl. 1 temperature value)
DKD-certificate (incl. 1 meas. point) for devices with external sensor
(Testing points: 15 %RH and 70 %RH / at 23 °C)
additional meas. points (from -80 to +500°C) each
for devices with fixed attached sensor
Pressure: (for each order a add. handling charge of € 25,-- must paid) (Testing points: 20 %RH, 50 %RH and 80 %RH / at 20 °C)
Over pressure -1...100 bar (incl. 10 points increase and decrease) For the storage of the devices, we recommend the
Absolute pres. 0...70 bar (incl. 10 points increase and decrease) use of a safe-keeping case
Complete Solutions: Komplett

GTH175/Pt - WPT2 (immersion probe) GFTH200 - WPF4
incl. certificate of calibration WPT2A (0°C / 70°C) and case GKK252. incl. certificate of calibration WPF4 (~20% / ~40% / ~60% / ~80%RH
increasing and decreasing) and case GKK252.
GTH175/Pt - WPT3 (immersion probe)
incl. certificate of calibration WPT3 (-20 / 0 / +70°C) and case GKK252. GMH3330 incl. TFS0100E - WPF4
incl. certificate of calibration WPF4 (~20% / ~40% / ~60% / ~80%RH
GTH175/Pt-E - WPT3 (insertion probe) ascending / descending) and case GKK3500.
incl. certificate of calibration WPT3 (-20 / 0 / +70°C) and case GKK252.
GMH3161-07/-12/-13 - WPD5
GTH1170 incl. GTF900 - WPT incl. certificate of calibration WPD5 (5 points ascending / descending)
incl. certificate of calibration WPT (with meas. points: 0 / 100 / 250 / 500°C) and case GKK3000.
and case GKK1100.
4
Pt100 - High-Precision Thermometer Calibrated Systems
Handheld instrument
Reference meter for any calibration requirement General:
The overall error of a measuring consists of the
Suitable for all Pt100 4-wire probes with
WK sum of the instrument error and the probe error.
4-pin miniature DIN-plug To minimise the overall error, we offer calibrated
Highest accuracy and resolution (0,01°C) and optimized systems below.
Due to their excellent system accuracy they are
Freely adjustable analog output 0-1V especially suitable for quality assurance accord-
or serial interface ing to ISO9000ff, as reference instruments in
manufacturing processes, laboratory, service and
Offset and slope input maintenance, etc.
Min-/max- value memory, hold function The system optimization is done via a special
characteristic curve which is determined for each
Additional functions of the GMH3750:
temperature probe separately and stored in the
instrument (GMH3750) or. with probe adjusting
2 integrated logger functions via offset and slope input (GMH3710).
Optical and acoustic min-/max- alarm Scope of supply:
Userdefined sensor curve (50 interpolation Measuring device GMH 3750
points) or GMH 3710, temperature
probe GTF 401 1/3 DIN,
Real-time clock with day, month and year plastic case GKK 3500 and
certificate of calibration with
3 calibration points.
GMH 3710 access. not incl.
GMH 3750 access. not incl.
GMH 3750 / SET1
Logger / EASYBus
Microprocessor precision thermometer for Pt100 4-wire
incl. certificate of calibration
Application: reference measurings in liquids, soft media, air/gases.
optimized measuring range: -20 .. +70°C
Specification: Temperature probe: GTF 401 1/3 DIN, Pt100, 4-wire
Measuring range: Hold function: By pressing a button the current (for tech. data please refer to p. 103)
-199,99 ... +199,99°C resp. -200,0 ... + 850,0°C values will be "frozen". System accuracy: better than 0,07°C (at opt. range)
-199,99 ... +199,99°F resp. -328,0 ... +1562,0 °F Auto-Off-Function: 1...120 min (can also be Calibration points: -20°C / 0°C / 70°C
Resolution: 0,01°C resp. 0,1°C deactivated).
0,01°F resp. 0,1 °F Offset and slope input: offset- and scale correc-
Linearisation: digital stored characteristic curve tion can be entered digitally. GMH 3750 / SET2
GMH3750 add. supports an userdefined curve. Additional functions of the GMH3750: incl. certificate of calibration
Auto-range: automatically or manually choose Min-/Max-alarm: the measuring value is
of the measuring range. constantly monitored if they remain within the optimized measuring range: 0 .. +250°C
Transmitter
Accuracy: (±1 digit) (at nominal temperature = 25°C) min./max. limits set. Temperature probe: GTF 401 1/3 DIN, Pt100, 4-wire
< 0,03 °C / 0,06 °F at resolution 0,01 ° - Alarm: 3 different alarm settings (for tech. data please refer to p. 103)
< 0,1 °C / 0,2 °F at resolution 0,1 ° off: alarm function not activated System accuracy: better than 0,3°C (at opt. range)
Temperature drift: < 0,002 °C / K on: visual alarm via display, integrated
Calibration points: 0°C / 100°C / 250°C
Probe: Pt100, 4-wire, in acc. to DIN EN 60751 buzzer and interface
probe connection via 4-pin miniature DIN-plug no Sound: alarm via display and interface
- Regulating function: with the help of the
Nominal temperature: 25°C
switching module GAM3000 (optinally) electric
GMH 3710 / SET1
Working temperature: -25 to +50°C incl. certificate of calibration
equipment can be switched on/off or alarm
Relative humidity: 0 to +95%RH (non-condensing)
memorised (p.r.t. page 41) optimized measuring range: -20 .. +70°C
Storage temperature: -25 to +70°C
Logger functions:
Display: two 4½ digit LCDs (12.4mm or 7mm high), Temperature probe: GTF 401 1/3 DIN, Pt100, 4-wire
- manually: 99 data sets (data recall via key-
Temperature probe
as well as additional arrows. (for tech. data please refer to p. 103)

board or interface)
Pushbuttons: 6 membrane keys System accuracy: better than 0,1°C (at opt. range)
- cycle: 16.384 data sets (data recall via
Output: 3-pin jack connector Ø3.5 mm, choice interface) Calibration points: -20°C / 0°C / 70°C
between seriell interface or analog output
- adjustable cycle time: 1 sec. ... 1 h
- serial interface: direct connection to RS232
Logger start and stop via the keyboard or inter-
or USB interface of a PC via electrically isolated
face. Comfortable read-out and display software Calibration accessories:
interface adapter GRS3100 or GRS3105 resp.
(GSOFT3050) available as additional equipment.
USB3100 (p.r.t. accessories). GMHKonfig free
Real-time clock: clock with day, month and year
- analog output: 0...1V, freely adjustable (visit out homepage: Download --> Software)
(resolution 13bit, accuracy 0.05% at nom. temp.)
Power supply: 9V-battery, type IEC 6F22 (in- Accessories: Software description:
cluded) as well as additional d.c. connector for Comfortable software to edit the user defined
plug-in probes Pt100 p.r.t. page 103 sensor curve of the GMH3750. (e.g. for calibration
external 10.5-12V direct voltage supply. (suitable
GLF 401 Mini Air probe (p.r.t. p. 103) laboratories etc.)
Alarm / Protection
power supply: GNG10/3000)

for fast and accurate By means of this software probes can be adjusted
Low battery warning: ' bAt ' W to the instrument. As result an overall accuracy
NE measurements in ambient air
Power consumption: approx. 1 mA of <0.03°C can be achieved depending of the
Dimensions: 142 x 71 x 26 mm (H x W x D) GKK 1100 case (340 x 275 x 83 mm) measuring range.
with foam lining for universal use
Impact-resistant ABS plastic housing, membrane Similar resistance curves (e.g. Ni100) can be
keyboard, transparent panel. Front side IP65, USB 3100 interface converter loaded to.
integrated pop-up clip. GSOFT 3050 software (p.r.t. p. 41) The sensor curve can stored external and
Weight: approx. 155 g reloaded to the device.
ST-R1 device protection bag
with cut out for probe connection Note: please note that for the interface communication
Functional range:
with the device a interface converter (GRS3100, GRS3105
Min./Max. value memory: Memorizing of max. GNG 10 / 3000 power supply or USB3100) is necessary (p.r.t. page 43)
and min. values.
miscellaneous accessories p.r.t. pages 41 - 43
5
Waterproof HACCP-Thermometer
Handheld instrument
with Pt1000-probe
WK
HACCP
W
NE Features
• Waterproof (device and probe)
• Easy handling
• Robust and with good grip
• High accuracy (±0.1 °C ±1 digit)
• Automatic freezing of constant

GMH 2710-K
measuring value (Auto-Hold)

Logger / EASYBus
GMH 2710
• Battery life time > 6000 hours
GMH 2710 Temperature measuring device incl. universal probe

GMH 2710-K Temperature measuring device incl. teflon probe
Transmitter
Field of application Technical data

High-precision measurements: Measuring ranges:
GMH 2710 -200.0 ... +200.0 °C
• Laboratory GMH 2710-K -200.0 ... +250.0 °C
• Quality management Resolution: 0.1 °C
Accuracy:
• Production process control
at -20.0 ... 100.0 °C
±0.1 °C ± 1 digit
at -70.0 ... 200.0 °C
±0,1 % of meas. value ±2 digit
Areas: Probe is calibrated to the device
• Foods (HACCP)
Temperature probe
Probe: Pt1000, 2-wire, potential-free,

waterproof and steam-tight, permanently
• Medicine / pharmaceutics connected to device
• Chemistry Ø 3 mm / length: 100 mm,
GMH 2710 Plastic handle, 135 mm long, max. 70 °C
• Fishkeeping, aquafarming, aquaculture
1 m PVC-cable, max. 100 °C
• Etc. GMH 2710-K Teflon handle and 1m Teflon cable,
both handle and cable are resistant to permanent
high temperatures up to 250 °C,
General functions stainless steel bend protection
• Auto-Power-Off Reaction time T90: approx. 10 s
Display: two 4-digit LCD (12.4 mm and 7 mm)
• Can be calibrated (zero point & slope) Nominal temperature: +25 °C
Alarm / Protection
• Automatic freezing of constant measuring value Working temperature: -25 to +50 °C

(Auto-Hold) Storage temperature: -30 to +70 °C
Power supply: 2 x AAA-batteries
• Low battery display “BAT”
Battery life time: > 6000 hours
Protection class: IP65
Accessories Dimensions: 106 x 67 x 30 mm (H x W x D)
215 g (incl. battery and probe)
Silicone protection cover Impact resistant ABS housing
6 8
High accuracy and precision for a High accuracy and precision,
minimum of price! plug-in probe, battery and
Handheld instrument
permanent mains operation possible
HACCP HACCP HACCP
WK
Komplett Komplett Komplett
WK WK WK
PREC S ON POCKET THERMOMETER PRECISION THERMOMETER
GTH 175/Pt GMH 175
Logger / EASYBus
Battery operation complete with probe Batteriy/mains operation,
for plug-in probes, Pt1000 2-wire
Application high-precision measurements in liquids, core measurements (using insertion
probe), for air/gases or as reference device for calibrating other, more expensive systems Application: high-precision measurements in liquids, soft
media, air/gases
Specification
Measuring range -199,9 ... +199,9 °C Specification
Resolution 0,1 °C Measuring range -199,9 ... +199,9 °C
Accuracy 0,1 % of m.v. ±2 digit (within range of: -70.0 ... +199.9 °C), Resolution 0,1 °C
(at nom. temperature) probe is calibrated to the device, ie. the error in the range of 0 to Accuracy (at nominal temperature = 25°C)
100 °C will be approx. 0,1 °C ± 1 digit. device: 0,1 °C ± 1 digit (within range of: -70.0 ... +199.9 °C)
Probe Pt1000, 2-wire, Probe Pt1000 probe, 2-wire,
electrically isolated and mounted in st. steel tube (1.4571) 3 mm Ø probe connection via 3.5 mm Ø jack
and approx. 100 mm long, plastic handle approx. 135 mm long, connector.
anti-buckling glanding and 1 m of highly flexible silicone cable
Transmitter
Probes not included - please order separately
- permanently connected to the device. or suita le, volt free sensors see elow or refer to page 104.
Display 3½ digit, approx. 13 mm high Display 3½ digit, approx. 13 mm high
Nominal temperature +25 °C Wor ing temperature -30 to +45 °C (low temperature -
Wor ing temperature -30 to +45 °C for use in cold storage rooms )
Storage temperature -30 to +70 °C Storage temperature -30 to +70 °C
Power supply 9V battery type IEC 6F22 (included) Power supply 9V-Battery type IEC 6F22 (included) as
Battery ser ice life approx. 200 operating hours well as additional d.c. connector for
Low battery warning BAT external 10.5-12V direct voltage sup-
Dimensions device: approx. 106 x 67 x 30 mm (H x W x D). ply. (suitable power supply: GNG10/3000)
impact resistant ABS plastic housing Battery ser ice life approx. 200 operating hours
Weight approx. 190 g (incl. battery and probe) Low battery warning BAT
Temperature probe
Dimensions approx. 142 x 71 x 26 mm (H x W x D).

GTH 175/Pt-E instrument with insertion probe impact resistant ABS plastic case,
front side IP65, integrated pop-up clip
Specification refer to GTH 175/Pt for table top or suspended use.
probe (st. steel tube, Ø 3mm x 100mm) like above, however with insertion probe for all
Weight approx. 160 g (incl. battery)
soft media
GTH 175/Pt-K core temperature meas. instrument Accessories

Specification refer to GTH 175/Pt Suitable plug-in temperature probes:
probe (st. steel tube, Ø 3mm x 100mm) like above, however with teflon handle and 1m (Probes interchangeable without recalibration.)
teflon cable. Both handle and cable are resistant to air temperature of up to 50 C and
can remain in the oven.
GTF 175 immersion probe
for liquids and aggressive gases
Option upcharges GES 175 insertion probe
Alarm / Protection
W for soft media

- Probe Moisture proof NE
Probe like GTH 175/Pt but with PVC-cable (max. 100 °C) and sealed handle (max. 70 °C) GOF 175 surface probe
for any solid surface
Special design types on request GLF 175 air/gas probe
e.g. probe cable in another length sensor tube in another length. for clean media
Accessories Detailed description and more probes please refer to page 104
GB spare battery ST-R1 device protection bag with
GKK 1100 case (340 x 275 x 83 mm) with foam lining cut-out for probe connection, suitable for GMH175, ...
Komplett-offering device incl. certificate of calibration and case p.r.t. page 4 GB spare battery
for additional accessories p.r.t. page 42 - 43 for additional accessories p.r.t. page 42 - 43
7
Digital precision quic -response thermometer
for thermocouples
Handheld instrument
General functions
WK
5 different thermocouples can be used (types , K, N, S, T)
Correction of meas. values for surface meas. can be switched on / off
Serial interface, device can be connected to bus system
Additional functions of GMH 3 30 and GMH 3 50

2 plug-in probes can be connected and read simultaneously
Temperature differences
Additional functions of the GMH 3 50

2 integrated logger functions

Optical and acoustic min-/max- alarm
Real-time clock with day, month and year
Additional functions of the GMH 3 10

Analog output 0 - 1 V
GMH 3210 accessories not incl. for connection of 1 plug-in probes

obes
b le pr 10
GMH 3230 accessories not incl. for simultaneous connection of plug-in probes su i t a
p. 10
5-
p.r.t.
GMH 3250
Logger / EASYBus
accessories not incl. for simultaneous connection of plug-in probes
Specification: GMH 3 10 GMH 3 30 GMH 3 50 General Functional Description

Thermocouples , K, N, S, T , K, N, S, T , K, N, S, T Compensation alue for surface measure-
Resolution 0,1°C or. 1°C 0,1°C or. 1°C 0,1°C or. 1°C ments A compensation value (to compensate for
the loss when transferring heat from the meas.
Measuring range -220°C ... +1750°C (depending on thermocouples)
object to the probe) can be set and switched
Measuring ranges (extract)
on/off for surface measurements if required.
Type K (MR1) -65,0 ... +300,0°C -199,9 ... +999,9°C
ero-point offset entry
(MR2) -220 ... +1372°C -220 ... +1372°C
By entering the offset temperature the parameter
further measuring ranges online at www.greisinger.de
can be moved parallel to the calibration graph.
Accuracy (extract)
Difference measurements
Type K (for MR1) ±0,03%of m.v. ±0,05%f.s. ±0,03% of m.v. ±0,05%f.s. (≥-60°C)
with a resolution of 0,1° or 1°. Temperature dif-
±0,2% of m.v. ±0,05%f.s. (<-60°C) ference probe 1 - probe 2 can be displayed if 2
Transmitter
(for MR2) ±0,08%of m.v. ±0,1%f.s. ±0,08% of m.v. ±0,1%f.s. (≥-100°C) probes are connected.
±1°C ±0,1%f.s (<-100°C)
Tare/diff-function
Wor ing temperature -25 to +50°C -25 to +50°C
Press button to set the difference display 'probe
Probe connections 1 2 2 1 - probe 2' to zero.
Display 2 four digit LCDs (12.4mm and 7mm high)
Analog output
Output 3-pin jack connector Ø3.5mm 0 ... 1V, freely adjustable
serial interface direct connection to RS232 or USB interface of a PC via (resolution 13bit, accuracy 0.05% at nom. temp.)
electrically isolated interface adapter GRS3100 or GRS3105
Min-/Ma -alarm
resp. USB3100 (p.r.t. accessories). The meas. values of probe 1 or 2, probes 1 and
analog output x - - 2 or the temp. difference are constantly moni-
Temperature probe
Power supply 9V-battery, type IEC 6F22 (included) as well as additional d.c. tored reg. the min. and max. values set.
connector for external 10.5-12V direct voltage supply. - Alarm 3 different alarm settings
(suitable power supply: GNG10/3000) off: alarm function not activated
Power consumption approx. 0.3 mA approx. 1,7 mA approx. 1,6 mA on: visual alarm via display, integrated
Housing dimensions 142 x 71 x 26 mm (L x W x D), Impact-resistant ABS plastic buzzer and interface
housing. Front side IP65, integrated pop-up clip for table top no Sound: alarm via display and interface
or suspended use. Weight approx. 155 g - Controlling function with the help of
the switching module GAM3000 (option-
Functions
ally) electric equipment can be switched
Min./Ma . alue memory x x x on/off or alarm memorised (p.r.t. catalogue
Hold function x x x page 43).
Auto-Off-function x x x Logger functions
Low battery warning x x x
Alarm / Protection
- manuelly 99 data sets (data recall via

Special applications keyboard or interface)
Compensation alue for - cycle 9.999 data sets (data recall via
surface measurements x x x interface)
ero-point offset entry x x x - ad ustable cycle time 1sec. ... 1h
Difference measurements - x x Logger start and stop via the keyboard or
interface. Comfortable read-out and display
Tare/diff-function - x x
software (GSOFT3050) available as additional
Min-/Ma -alarm - - x
equipment.
Logger functions - - x
Real-time cloc clock with day, month and year.
Real-time cloc - - x
High precision, low power consumption, min-/max-value memory,
Maximum speed, universal application, low price hold function, auto-off function,
down to -25°C ambient temperature, °C and °F, offset/scale
Handheld instrument
WK WK Komplett WK
WK
U CK RESPONSE THERMOMETER PREC S ON U CK RESPONSE THERMOMETER
GTH 1150 GTH 1170

Battery operation for plug-in probes Battery operation for plug-in probes C / F 0 1 or 1
min./ma . alue memory hold automatic-off offset/scale
GMH 1150
Battery/mains operation for plug-in probes GMH 1170
Logger / EASYBus
Battery operation for plug-in probes C / F 0 1 or 1
Application quick response measurements on surfaces, in liquids, soft min./ma . alue memory hold automatic-off offset/scale
media, air/gases, at the smallest objects etc. For all applications where a
resolution of 1 °C is sufficient. Application quick response measurements on surfaces, in liquids,
air/gases etc.
Specification Specification
Measuring range -50 ... +1150 °C Measuring ranges -65,0 ... +199,9 °C or -65 ... +1150 °C
Resolution 1 °C (-85,0 ... +199,9 °F or -85 ... +1999 °F)
Accuracy ≤ 1 % ± 1 Digit (from -20 to +550 and 920 to 1150 °C) Resolution 0,1 °C or 1 °C (0,1 °F or 1 °F)
(at nominal temperature) ≤ 1.5 % ±1 Digit (from 550 to 920 °C) Accuracy -65.0...199.9 °C: ±0.05 % of m.v. ±0.2 % FS
from -20 to -50 °C according to attached correction table ± 1 digit (at nom. temperature) -65 ... 1150 °C: ±0.1 % of m.v. ±0.2 % FS
Probe connection standard flat-pin plug (free of thermo-voltage) Temperature drift 0,01 %/K
suitable for all NiCr-Ni (type K) - probes. Point of comparison ±0,3 °C
ro e is not included in scope of supply optimum Probe connection standard flat-pin plug (free of thermo-voltage)
Transmitter
pro e to e ordered separately depending on de suitable for all NiCr-Ni (type K) - probes.
sired application Refer to pages 105 10 . (for suita le pro es please refer to pages 105 10 )
Display 3½ digit, approx. 13 mm high Offset and Scale digital offset and scale adjustment for optimum
Nominal temperature 25 °C precision.
Wor ing temperature 0 to 45 °C Display 3½ digit, approx. 13 mm high
Storage temperature -20 to +70 °C Wor ing temperature -25 to +50 °C
Power supply 9V battery type IEC 6F22 (included). Storage temperature -25 to +70 °C
Additional at GMH 1150: d.c. connector for external Power supply 9V battery type IEC 6F22 (included)
10.5-12V direct voltage supply. Measuring inter al approx. 3 meas. / sec.
(suitable power supply: GNG10/3000) Power consumption approx. 0.15 mA
Power consumption approx. 0.4 mA Battery ser ice life approx. 2000 operating hours
Temperature probe
Battery ser ice life approx. 700 operating hours Low battery warning BAT
Low battery warning BAT Auto-off-function selectable from 1 to 120 min. or deactivated.
Dimensions GTH ... approx. 106 x 67 x 30 mm (H x W x D). Min./Ma . alue memory memorizing of max. and min. values.
impact resistant ABS plastic housing. Hold function By pressing a button the current values will be
GMH ...approx. 142 x 71 x 26 mm (H x W x D). memorized.
impact resistant ABS plastic housing, front side IP65, Dimensions GTH ... approx. 106 x 67 x 30 mm (H x W x D).
integrated pop-up clip for table top or suspended use. impact resistant ABS plastic housing.
Weight approx. 150 g (GTH 1150), approx. 160 g (GMH 1150) GMH ...approx. 142 x 71 x 26 mm (H x W x D).
impact resistant ABS plastic housing, front side IP65,
integrated pop-up clip for table top or suspended use.
Accessories Weight approx. 135 g (GTH 1170), approx. 150 g (GMH 1150)
GTF 300 wire probe (for measuring ranges -65 ... 300 °C)
Accessories
Alarm / Protection
additional NiCr-Ni probes p.r.t. page 105 - 109

NiCr-Ni probes p.r.t. page 105 - 109
GB spare battery GB spare battery
GKK 5 case (235 x 185 x 48 mm) with foam lining GKK 5 case (235 x 185 x 48 mm) with foam lining
GKK 3000 case (275 x 229 x 83 mm) with punched lining GKK 3000 case (275 x 229 x 83 mm) with punched lining
suitable for all devices of the GMH3xxx-series, GMH 1150, GTH 1170 suitable for all devices of the GMH3xxx-series, GMH 1170, GTH 1150
ST-KN device protection bag, suitable for GTH 1150, GTH 1170 ST-KN device protection bag, suitable for GTH 1170, GTH 1150
ST-N1 device protection bag, suitable for GMH 1150, GTH 1170 ST-N1 device protection bag, suitable for GMH 1170, GTH 1150
GNG 10 / 3000 power supply Komplett-offering p.r.t. page 4
device incl. certificate of calibration and case
for additional accessories p.r.t. page 42 - 43
for additional accessories p.r.t. page 42 - 43
The infrared digital Intelligent multi purpose infrared thermometer
hand-held thermometer
with precision glass optic, setting a standards
Handheld instrument
at low cost price

adjustable emission rate
from 0.100 to 1.000
(for numerous materials important)
Adjustable visible and audible alarm
Optical resolution 20:1
Constant measuring area in between

the distance of 13 to 1 0 mm
Targeting laser for exact aiming of the

object to be measured
Fast scanning of hot and cold spots

within 0.3 seconds
GMTL 1826 - MT4 GIM 530 MS

(with laser visor)
Calibration certificate (testpoints at 23°C, 110°C a. 510°C)
Logger / EASYBus
The GMTL1826-MT4 is compact, light-weight and

easy to use: Just aim, trigger and read the tem- User-friendly industrial design combined to state of the art technology are setting a new standard in
perature from the backlight display - that´s all. professional and all day non-contact temperature measuring.
Your search for a quick and safe way to measure The large temperature range of -32 to 530°C, the targeting laser and the optical resolution of 20:1
temperature has found a solution: The GMTL 1826 allow very precise measuring of surfaces in a variety of applications. Simply aim at the target
infrared thermometer. with the laser, push the trigger and the value is displayed within 0.3 seconds plus several other
informations.
Examples for application:
Electric and electronics - detection of hot Examples for application:
spots
Ventilation/heating and air conditioning Electrical and mechanical service and maintenance
- inspection of heat exchangers ... Heating, ventilation, air-conditioning - finding thermal bridges etc.
Food - inspection of temperature when keeping Motor ehicle diagnosis electricity home impro ement
warm or cooling food. Chec ing food temperature during eeping warm or storing
Specification:
Transmitter
Range: -18 ... +400°C (0 ... +752°F)

Specification:
Resolution: 0.2°C or 0.5°F Measuring range -32 ... + 530°C (-20 ... +980°F)
Temperature display: °C or °F selectable Resolution 0.1°C (0.1°F)
Accuracy (at ambient temperature = 23°C ±5°C): Temperature display °C or °F selectable
±2% of m.v. resp. ±2°C (highest value shall be valid) System accuracy (at ambient temperature = 23°C ±5°C)
(-18 ... -1°C = ±3°C) ±1% or ±1°C from 0°C to 530°C (highest value shall be valid)
Repeat accuracy: ±2% of m.v. resp. ±2°C ±1°C ± 0.07°C/°C from 0°C to -32°C
Measuring one dia: 8 : 1 Repeat accuracy ±0.5% or ±0.7°C from 0°C to 530°C (highest value shall be valid)
Response time (t95): 0.5 seconds ±0.7°C ±0.05°C/°C from 0°C to -32°C
Emission rate: set to 0,95 Optical Resolution D S 20 : 1
Laser pointing appliance: single ray Response time t 5 0.3 seconds
Temperature probe
Working temperature: 0 ... 50 °C Spectral range 8 - 14 m

Storage temperature: -20 ... 65 °C Emission rate 0.100 to 1.000, free selectable
Laser < 1mW laser class IIa
Power supply: 9V battery type IEC 6F22
(included) Configuration: min/max/scan/hold/offset/°C/°F
Display illumination yes
Battery service life: approx. 12 hours
Alarm function optical and acoustic HIGH-/LOW- alarm
Dimensions: 152 x 101 x 38 mm
Wor ing temperature 0 ... 50 °C
Weight: approx. 227 g
Storage temperature -20 ... 60 °C (without battery)
Power supply 9V alkaline battery
Accessories:
Battery ser ice life approx. 20 hours for use with laser and illumination
GKK 252 small case Weight / Dimensions approx. 150 g 190 x 38 x 45 mm (H x W x D)
(235 x 185 x 48 mm) with foam lining
Scope of supply Device with battery, operating manual, device bag made of nylon
GKK 3100 case
Alarm / Protection
(275 x 229 x 83 mm) with foam lining Accessories

GB 9 V spare battery GKK 5 small case (235 x 185 x 48 mm) with foam lining
Display
D 8 current temperature value
S 1 MIN-/MA -value: current and last
HIGH-/LOW-alarm
HOLD-function
emission rate
symbol for display illumination
and laser
10
Low price infrared technology for non-contact and quick response surface
temperature measurements from -32 up to +760°C (ST80). The new LaserSight - series
All devices with laser pointing appliance Temperatures in the cross-hair
Handheld instrument
For measuring transducer for stationary application please refer to page 87
G M1 40-ST 5 B G M1 40-ST 0 B G M1 40-ST 0 B
GIM 3590
The measured point will be marked exactly with the
precision of a laser cross-hair. The integrated sharp point
optics allows measurements of even smallest measuring
Non-contact infrared digital thermometer cpl. and ready for operation objects down to 1mm.
Its position sensor turns the display always to the most
GIM 1840 - ST25 XB comfortable orientation.
Measuring range -35 to 00 C
Logger / EASYBus
GIM 1840 - ST60 XB switchable focus point optics
laser cross-hair shows real measuring point size
GIM 1840 - ST80 XB Optical resolution 5 1
E amples for application Flip-display
PC board test super-heated components additional thermocouple input
entilation/heating/air conditioning/ ci il engineering detection of bad insulation, leaking tubes, USB interface and graphical software
energy consumption, general service measurements etc.
Specification
Electric systems machines de ices detection of hot spots at electric connections, heating up of
motors, bearings, pumps, compressors etc. Measuring range -35.0 ... +900.0°C
(IR and thermo couple type K)
Food processing and testing temperature of food, storage rooms, processes etc.
TC input thermo couple type K
Medical technology biological and chemical analyses quick-response non-contact temper-
Resolution 0.1°C
ature measurements, trouble-free operation even when handling dangerous, aggressive media
Accuracy R ±0.75°C or ± 0.75% of m.v. )
ndustry mechanical engineering craft and trade surface measurements at rotary parts such
Accuracy type K ±0.75K or ± 1% of m.v. )
as rollers, drums, shafts, printing machinery, plastic welding, asphalt, concrete etc. ( at 23°C ± 5°C ) ) highest value shall be valid
Transmitter
Response time t 5 150ms
Specification: ST 0 B ST 0 B ST 0 B Optical resolution 75:1 16mm 1200mm
Measuring range -32 ... +535 °C -32 ... +600 °C -32 ... +760 °C at focus point optic 1mm 62mm
Resolution 0.2°C 0.1°C 0.1°C Rate of emission 0.100 to 1.100, selectable
Temperature display °C or °F selectable Meas. functions MA /MIN/HOLD/DIF/AVG/°C/°F
Accuracy ±1% of measured value or ±1°C (at > 23°C) Alarm functions acoustic / visual high-low-alarm
(at ambient temperature = 23°C ±5°C) ±2°C (-18...23°C) ±2.5°C (-26...-18°C) ±3°C (-32...-26°C) Display LC Flip-Display with position
sensor and bar graph
Repeat accuracy < ±0.5% of measured value or ±1°C
Bac light green or alarm colours (red / blue)
Response time t 5 0.5 seconds
Spectral range 8 - 14 m
Rate of emission permanently set to 0.95 digital settings from 0.30 to 1.00 Wor ing temperature 0 ... 50°C
Laser pointing appliance cross over double ray single ray single ray Relati e humidity 10 ... 95%, non condensing
Temperature probe
Data memory -- 12 measurings 12 measurings Data logger 100 measurements protocols

Hi-/Lo-alarm -- buzzer buzzer nterface USB
Probe connection -- for Pt1000 probes (p.r.t. page 102) Software oscilloscope software,
Ma - alue memory x -- -- 20 readings per second
Max-/Min-value memory -- x x oltage supply 2 x AA alkaline battery o. USB
D F/mean alue -- x x Weight 420 g
Hold function x x x Scope of supply USB cable software, bag,
insertion probe type K, batteries,
Re-call of alue carrying loop, calibration protocol,
measured last -- x x
transport case
Power supply 9V-battery type IEC 6F22 (included)
Display illumination press key to switch on/off Accessories
Wor ing temperature 0 ... 50 °C
Certificate of calibration
Dimensions approx. 160x 55 x 205 mm approx. 135 x 40 x 195 mm approx. 135 x 40 x 195 mm
Weight approx. 360 g approx. 320 g approx. 320 g Tripod
Alarm / Protection
Storage cpl. device with carrying bag and hand loop

G M35 0
OPT ON Certificate of calibration upon request
G M1 40-ST 5 B G M1 40-ST 0 B G M1 40-ST 0 B
D 16 D 30 D 50
S 1 S 1 S 1
S 20 16 40 70 100 130 mm
Ø 13 mm Ø 56 mm Ø 94 mm Ø 24 mm Ø 30 mm Ø 62 mm Ø 19 mm Ø 18 mm Ø 42 mm Standard
at at at at at at at at at
D 0 1200 2000 3000 4000 5000 mm
20 cm 90 cm 150 cm 30 cm 90 cm 150 cm 30 cm 90 cm 150 cm
Focus point S 17 1 123 262 mm
D 0 62 500 1000 mm
11
humidity, temperature and flow rate measuring device
Handheld instrument
Double display of humidity and temperature

Komplett
Compact probe for humidity and temperature measuring resp. flow
WK rate measuring (probe exchange without re-calibration)
Calculation of dew point temperature, dew point distance and enthalpy
Additional NiCr-Ni-socket for surface measurement
Min-/Max value memory, Hold function
Serial interface, device can be connected to bus system (up to 5 de-
vices can be connected to one PC interface)
Battery/d.c. operation
Additional functions of the GMH3350:
2 integrated logger functions
Optical and acoustic min-/max- alarm
Real-time clock with day, month and year
Adjustment-function for atmospheric humidity measurements
GMH 3330 probe not included
NiCr-Ni-temperature measuring: any standard NiCr-Ni-probe
GMH 3350 probe not included (type K) can be plugged in. Recommendation: GOF130VE (p.r.t. p. 105).
Logger / EASYBus
Please order probes separately (p.r.t. page 13) A compensation value can be set for surface meas. if necessary.
(No re-calibration required for probe exchange ) Flow measurements:
Two different systems for averaging are integrated:
Specification: - continuous averaging: the average value displayed is calculated
Measuring ranges: using the last measurements during the averaging time set.
Rel. humidity: 0,0 ... 100,0 %RH - averaging upon request: by starting the current measuring value will
Ambient temperature: -40,0 ... +120,0°C (depending on TFS-probe) be displayed for tge averaging time. As soon as the time has expired the
Surface temperature: -80,0 ... +250,0°C average value will be displayed, the device is in HOLD mode.
Flow rate: depending on STS probe (p.r.t. page 13) - selectable averaging time: 1 ... 30 seconds
Resolution: 0,1 %RH., 0,1 °C / 0,1 °F, 0,01 m/sec. Additional functions of the GMH3350:
Accuracy (device): (±1 digit, at nominal temperature = 25°C) Min-/Max-alarm: the measuring value is constantly monitored if
Rel. humidity: ±0.1% they remain within the min./max. limits set.
Ambient temperature (Pt1000): ±0,2% - Alarm:3 different alarm settings
Transmitter
Surface temperature (NiCr-Ni): ±0,5% of m.v. ±0,5°C off: alarm function not activated
Flow rate: ±0,1% on: visual alarm via display, integrated buzzer and interface
Probes: (p.r.t. page 13) No calibration required for exchange of hu- no Sound: alarm via display and interface
midity/temperature or flow rate probe. - Controlling function: with the help of the switching module
Probe connection: 6-pin screened Mini-DIN-socket GAM3000 (optionally) electric equipment can be switched on/off or
NiCr-Ni-connection: for miniature flat-pin plug alarm memoried (p.r.t. catalogue page 43)
Display: two 4½ digit LCDs (12.4mm or 7mm high), as well as addi- Logger functions:
tional functional arrows. -manuelly: 99 data sets (data recall via keyboard or interface)
Working temperature: -25 to +50°C -cycle: 5.400 data sets (data recall via interface)
Relative humidity: 0 to +95%RH (non-condensing) -adjustable cycle time: 1sec. ... 1h
Temperature probe
Storage temperature: -25 to +70°C Logger start and stop via the keyboard or interface. Comfortable
Pushbuttons: 6 membrane keys read-out and display software (GSOFT3050) available as addi-
Interface: serial interface, direct connection to RS232 or USB tional equipment.
interface of a PC via electrically isolated interface adapter GRS3100 Real-time clock: clock with day, month and year
or GRS3105 resp. USB3100 (p.r.t. accessories).
Power supply: 9V-battery, type IEC 6F22 (included) as well as ad-
Accessories:
ditional d.c. connector for external 10.5-12V direct voltage supply. GNG 10/3000 plug-in power supply
(suitable power supply: GNG10/3000) GKK 3500 case with cut-outs for GMH3xxx
Auto-Off-Function: 1...120 min (can also be deaktivated). GKK 3600 case with foam lining for universal use
Power consumption: approx. 2,5 mA (incl. TFS0100)
Low battery warning: and bAt USB 3100 interface converter, electrically isolated
Housing dimensions (device): 142 x 71 x 26 mm (H x W x D) ST-RN device protection bag with cut out for sensor
Alarm / Protection
connection, suitable for: 3330 3350 3 30 3 50 (p.r.t. page 42)

Impact-resistant ABS plastic housing, membrane keyboard.
Front side IP65, integrated pop-up clip for table top or suspended use. GSOFT 3050
Weight: approx. 160 g (incl. battery) software for the setting, data read-out and printing of all logger data stored
for devices of the GMH3xxx-series with logger function. (p.r.t. page 41)
Functional range:
Min-/Max-value memory: memorizing of max. and min. values for GAM 3000
humidity, temperature, dew point etc. Switching module for devices of the GMH3xxx-series incl. alarm output
Hold function: By pressing a button the current values will be "frozen". GMH3330 incl. TFS0100E and WPF4
Calculation of dew point: based upon humidity and temperature. device incl. measuring probe, certificate of calibration and case (p.r.t. page 4)
Calculation of dew point distance: by means of a surface meas. miscellaneous accessories case mains adaptors etc.
Calculation of enthalpy (thermal content h of the air) suitable for all GMH3xxx devices p.r.t. p. 41 - 43
12
Meas. probes for GMH 3330 and GMH 3350
Handheld instrument
humidity / temperature flow speed
Humidity/temperature: Water:
TFS 0100 E 0 0 ... 100 0 r.h. STS 005 0 05 ... 5 00 m/sec.

Humidity/temperature probe calibrated and e changeable Flow measuring probe with snap-on head, calibrated and exchangeable.
Specification : Specification :
Meas. ranges: Sensor type: windmill-type anemometer
Humidity: 0,0 ... 100,0 %RH (rec. range of application: 11...90%RH) Meas. range: 0,05 ... 5,0 m/sec.
Logger / EASYBus
Temperature: -40,0 ... +120,0 °C (attention: working temperature of Accuracy: ±1 % of range ± 3% of meas. value (at nominal temperature)
electronics ) Permiss. angle flow: ±20°, without additional meas. faults
Accuracy: (at nominal temperature = 25°C) Working temperature : 0 to +70 °C
Humidity: ±2,5 %RH Relative humidity: 0 to +100 %RH (non-condensing)
Temperature: ±0,5 °C
Dimensions: Probe head: Ø 11 x 15mm, tube: Ø 15 mm overall length
Sensors: 165 mm, required insertion opening: Ø 16 mm, approx. 5m PVC connec-
Humidity: capacitive polymer humidity sensor tion cable with 6-pin Mini-DIN-plug
Temperature: Pt1000, 1/3 DIN Weight: approx. 75 g
Electronics: PC board with amplifier and data memory for sensor
data (calibration, etc.) integrated in probe handle.
Air:
Working temperature:-25 to +60°C (handle and electronics)
-40 to +120°C (for short time up to +120°C) (sensor head and tube)
Relative humidity: 0 to +100 %RH
STS 020 0 55 ... 0 00 m/sec.
Flow measuring probe with snap-on head, calibrated and exchangeable.
Transmitter
Dimensions: Probe tube: Ø14 x 119 mm, plastic handle: Ø19 x 135 mm,
approx. 1m PVC conn. cable with 6-pin Mini-DIN-plug Specification :
Weight: approx.. 90 g Sensor type: windmill-type anemometer
Meas. range: 0,55 ... 20,00 m/sec.
Accuracy: ±1 % of range ± 3% of meas. value (at nominal temperature)
Accessories: calibration device
Permiss. angle flow: ±20°, without additional meas. faults
Humidity reference cells works on the basis of physiochemical Working temperature: 0 to +70 °C
processes. A specific value of relative humidity adjusts itself over a
saturated salt solution. Relative humidity: 0 to +100 %RH (non-condensing)
The test chamber is separated from the solution by a diaphragm so Dimensions: Probe head: Ø 11 x 15mm, tube: Ø 15 mm overall length
that the sensor under test is protected against contamination by the 165 mm, required insertion opening: Ø 16 mm, approx. 5m PVC connec-
Temperature probe
tion cable with 6-pin Mini-DIN-plug

solution. The test container can be used in all mounted positions.
GFN-SET1
Humidity reference cells for 33 and 76 %RH,
probe adapter and robust carry case
Spare parts and accessories:
GFN 33
humidity reference cell for 33 %RH, incl. adapter STE 005
Spare snap-on head for STS 005
GFN 76
humidity reference cell for 76 %RH, incl. adapter
STE 020
Alarm / Protection
Spare snap-on head STS 0 0
Surface temperature:
GTS Telescopic rod (overall length 1 m)
Please specify when ordering - no retrofit assemblage possible!
GOF 400VE (p.r.t. page 105)
Quick-response surface probes for walls, floors etc.
GTF 300 (p.r.t. page 107)

Quick-response basic thermocouple probe for universal applica-
tions surface measurement picture shows G S with assem led S S0 0
13
Humidity/Temperature Meas. De ice Humidity / Temperature / Dew Point Measuring De ice
Handheld instrument
WK omplett WK
Digital-Hygro-/Thermometer Digital-Hygro-/Thermometer Measuring set

GFTH 95 GFTH 200
Application: quick-response humidity and tem-
perature measurements in EDP rooms, museums,
GFTH 200 SET (incl. infra-red thermometer GIM 530 MS)
galleries, churches, office complexes, workshops, Because of the low power consumption and the integrated min-/max-value memory the GFTH200 is
Logger / EASYBus
storage rooms, swimming-baths, private build- perfectly suitable for long term climate surveillances.
ings, greenhouses, for refrigeration engineering, The additional infrared thermometer contained in the GFTH 200 SET makes it easy to check mould-
air conditioning, for building sites/technology, for problem areas on walls etc. The wall can easily scanned by means of the laser beam within very
inspectors or rendering of expert opinions etc. short time. When wall temperature falls below the critical dewpoint (this is, when the wall gets wet),
the device alerts with an audible signal.
Specification:
Advantages GFTH 200:
Measuring range:
relative humidity, temperature and dew point in just one instrument
°C: -20.0 ... 70.0 °C
%RH: 10 ... 95 %RH (recom. range: 30 ... 80%) high accuracy by means of digital works calibration
Resolution: 0.1°C or 0.1 %RH. min-/max-value memory for all measurements
Accuracy: (±1 digit) (at nominal temperature = 25°C) external Pt1000 temperature probe connectable
temperature: ±0.5% of. m.v. ±0.1°C offset and slope correction for easy adjustment
humidity: ±3%RH (for range 30 to 80%) extrem low power consumption
Measuring probe:
temperature: Pt 1000 Additional advantages GFTH 200 SET:
Transmitter
humidity: capacitive polymer humidity sensor blindingly easy search for thermal bridges
Response time: T90 = 15 sec. targeting laser for precise location even of inaccessible areas
Display: 3½-digit, 13mm high LCD-display audible alarm below dewpoint
Operation elements: slide switch for selection of fast evaluation of mould-problem areas
measuring range
Nominal temperature: 25°C
Operating conditions: Specification:
Electronic: -20...70°C; 0...80 %RH (non-condensing) Measuring range: Power supply: 9V-battery type IEC 6F22
Sensors: -20...70°C; 0...100 %RH Temp: -25.0 ... +70.0 °C; -13.0 ... +158.0 °F Power consumption:
Power supply: 9V-battery type IEC 6F22 (in %RH: 0.0 ... 100.0 %RH approx. 9μA at 1 measurings / 60s
scope of supply) (recommended range: 11 - 90 %RH) approx. 100μA at 1 meas. / sec. (mode FAST)
Temperature probe
Power consumption: max. 0.1 mA Td: (Dewpoint) -40.0...+70.0 °C or -40.0...+158.0 °F Low battery warning: „BAT“
Low battery warning: „BAT“ displayed auto- Resolution: 0.1 %RH., 0,1°C or 0.1°F Min./max. value memory: Min and Max measur-
matically in display of low battery condition. Accuracy: (±1 digit) (at nominal temperature = 25°C) ing values are stored for all 3 ranges.
Housing: impact resistant ABS-housing temperature (internal): ±0.5% of m.v. ±0.1°C Hold key: The current measuring will be "fro-
106 x 67 x 30 mm, plus sensor head protruding temperature (external): 0.1°C (device) + probe zen" (for all three ranges).
at the longer side 35 mm long and 14 mm Ø, ie. accuracy Housing: impact resistant ABS-housing
overall length 141 mm. humidity: ±2.5 %RH (for range 11 to 90%) 106 x 67 x 30 mm, plus sensor head protruding
Weight: approx. 135 g incl. battery Measuring probe: at the longer side 35 mm long and 14 mm Ø, ie.
temperature: Pt 1000 overall length 141 mm.
humidity: capacitive polymer humidity sensor Weight: approx. 135 g incl. battery
Accessories: Response time: T90 = 10 sec.
GIM 530 MS: for technical data for this instru-
terminal for external probe: for connection of
GKK 252 case ment please refer to page 10.
(235 x 185 x 48 mm) with foam lining any Pt1000-probes with 3.5mm mono plug
Alarm / Protection
(for suitable probes p.r.t. page 92)

GKK 1100 case Accessories
Display: 3½-digit, 13mm high LCD-display
(340 x 275 x 83 mm) with foam lining GKK 5 case
operation elements: 3 keys for On/Off, min- (235 x 185 x 48 mm) with foam lining
GB 9 V spare battery /max-value display and hold. Slide switch for
selection of measuring range. GOF 175 Mini temperature probe
Certificate of calibration WPF4 for surface temperature measuring (p.r.t. page 104)
for ISO9000ff p.r.t. page 4 Nominal temperature: 25°C
Operating conditions: rt er te perat re pr e re er t page 104
Electronic: -25...70°C; 0...80 %RH (non-condensing) Certificate of calibration WPF4
Sensors: -25...70°C; 0...100 %RH for ISO9000ff p.r.t. page 4
GFTH200 - WPF4 omp o r
device incl. certificate of calibration and case p.r. . p. 4
14
Precision Hygro- / Thermo- / Barometer
Handheld instrument
relative humidity, temperature and air pressure in just one instrument
WK
additional derived units: dew point temperature, wet bulb temperature,
moisture content and absolute humidity
min-/max-value memory for all measurements
high accuracy by means of digital works calibration
offset and slope correction for easy adjustment
extreme low power consumption
optional with serial interface
Application: uick-response measurement of air pressure, atmospheric humidity, temperature
and further derived units in EDP rooms, museums, churches, administrative and residential
buildings, storage rooms, green houses, pools, production rooms, for cooling technology and air
conditioning as well as for building engineers and for the evaluation of damage to buildings etc. Due
to highly accurate sensors this device has a notably higher precision than comparable devices.
Via the additional displaying possibilities ( dew point temperature Td , wet bulb temperature
Twb , absolute humidity g/m and moisture content of the air g/kg ) the current state of
the air is precisely and concretely shown. Due to the low power consumption, the device
can be run permanently, for example as weather station .
Digital-Hygro-/Thermo-/Barometer
Logger / EASYBus
GFTB 100
Specification:
Measuring range: Offset and Scale: digital offset- and scale adjustment of all sensors
temperature: -25.0°C ... +70.0 °C or -13.0 ... +158.0 °F Housing: impact resistant ABS-housing
humidity: 0.0 ... 100.0 %RH (recommended range: 11 ... 90 %RH) approx. 106 x 67 x 30 mm (H x W x D), plus sensor head protruding at the
air pressure: 10.0 ... 1100.0 mbar longer side 35 mm long and 14 mm Ø, ie. overall length 141 mm.
derived units: Weight: approx. 130g incl. battery
dew point temperature Td: -40.0 ... 70.0 °C or -40.0 ... +158.0 °F
wet bulb temperature Twb: -27.0 ... 70.0 °C or -16.6 ... +158.0 °F Options: (upon upcharge)
moisture content x: 0.0 ... 280.0 g/kg - GRS serial interface
absolute humidity d: 0.0 ... 200.0 g/m (ordering description: GFTB 100 / GRS)
Resolution: 0.1%RH, 0,1°C/°F, 0.1mbar - KIT USB-interface kit, consisting of:
Transmitter
Accuracy: (±1 digit) (at nominal temperature = 25°C) - interface option GRS for the GFTB 100
temperature: ±0,5 % of m.v. ±0,1°C (Pt1000 1/3 DIN B) - USB interface converter USB 3100
- multi channel software EBS20M (to record all device units)
humidity: ±2,5 %RH (at range 11 to 90%) (ordering description: GFTB 100 / KIT)
air pressure: ±1,5 mbar (750...1100 mbar)
Measuring probe:
temperature: Pt1000 Complete-offering:
humidity: capacitive polymer humidity sensor
air pressure: piezoresistive pressure sensor hybrid GFTB 100 SET
Response time: T90 = 10 sec. (GFTB100 incl. infra-red thermometer GIM 530 MS)
Display: 4 -digit, approx. 11mm high LCD-display
The additional infrared thermometer contained in
Operation elements: 3 keys for ON/OFF, min-/max-value display, hold
Temperature probe
the GFTB 100 SET makes it easy to check mould-

Nominal temperature: 25°C problem areas on walls etc.
Operating conditions: The wall can easily scanned by means of the
Electronics: -25...70 °C; 0...80 %RH (non-condensing) laser beam within very short time. When wall
Sensors: -25...70 °C; 0...100 %RH temperature falls below the critical dewpoint (this
Power supply: 9V-battery type IEC 6F22 is, when the wall gets wet), the device alerts with
Power consumption: approx. 30µA at 1 meas. / 60s (mode SLOW) an audible signal.
approx. 70µA at 1 measurings / sec. (mode FAST)
Low battery warning: BAT Additional advantages GFTB 100 SET:
Auto-off function: when Auto Off is activated, the device switches auto-mati- blindingly easy search for thermal bridges
cally off, if keypad is not attended for a longer time (selectable 1..120min).
targeting laser for precise location even of inaccessible areas
Interface (optional): serial interface, direct connection to RS232 or USB audible alarm below dewpoint
interface of a PC via electrically isolated interface converter GRS3100 o.
fast evaluation of mould-problem areas
Alarm / Protection
GRS3105 resp. USB3100 (accessories).

Note: for technical data for the infra-red thermometer GIM530MS please
Min./max. value memory: Min and Max measuring values are stored for refer to catalog page 10.
all ranges.
Hold key: the current measuring will be frozen (for all ranges)
Configurable display: The device can be configured by the user: display
Accessories:
all measuring values alternating (2 or 4 sec. Cycle) or permanent with GKK 252 case (235 x 185 x 48mm) with foam lining
manual choice. Not required values can be suppressed.
Sea level adjustment: The displayed value of the barometer can be con-
WPF Certificate of calibration, humidity, for ISO9000ff (p.r.t. p. )
verted to air pressure at sea level. (therefore the altitude above sea level has to WPD5 Certificate of calibration, pressure, for ISO9000ff (p.r.t. p. )
be entered)
Tendency indicator (for barometer): air pressure falling/increasing miscellaneous accessories (cases, etc.) p.r.t. page 1- 3
15
Multi-point hay temperature Low cost hay temperature
meas. probe of stainless steel measuring probe
Handheld instrument
Typ electronic 0150 Typ electronic 0120

Fire prevention at self heating of feed by permanent obser- We offer a economic measure to avoid damage caused by the
vation of the temperature trend in stored harvests like straw, self-heating due biological processes in stored hay, straw, etc,
hay, crop etc. which may heat up the stored goods up to self ignition.
As well the instrument is suitable to control other kinds of
Logger / EASYBus
storage. fibre glass measuring rod

rugged stainless steel design one measuring point at the tip
3 measuring points alongside probe economical
glow and fire zone detection
Specification: Specification:
Measuring range: -20°C to +150°C Measuring range: -20.0 ... +120.0 °C
Resolution: 0,1°C Resolution: 0.1 °C
Accuracy: ±2°C (at nominal temperature) Accuracy: ± 2 °C (at nominal temperature)
Probe connection: approx. 2m of PVC connecting cable with Probe connection: approx. 3m long connection cable with cinch
five pole connector plug ans connection adaptor GAD-1 Cinch
Transmitter
Measuring rod: V4A stainless steel probe, length 3.46m, approx. Measuring rod: fibre glass probe, approx. 4 m long, approx. 10
18mm diameter, 3 measuring points at 20cm, mm Ø, 1 measuring point in the probe tip
190cm and 280cm (distance from spike) Cutter tip: double-edged screw-type tip with integrated tem-
OPTION: overall length of 5m perature sensor
Cutting spike: unscrewable 4-blade spike Display: 3½-digit, 13mm high LCD-display,
Display: 3½-digit, 13mm high LCD-display, display illumination by keypress
display illumination by keypress Nominal temperature: 25 °C
Nominal temperature: 25 °C Working temperature: 0 to 50 °C
Working temperature: 0 to 50 °C Relative humidity: 0 ... 95 %RH (non condensing)
Relative humidity: 0 ... 95 %RH (non condensing) Storage temperature: -10 to 60 °C
Temperature probe
Storage temperature: -10 to 60 °C Power supply: para pp or m a r ro a m a o

Power supply: para pp or m a r ro a m a o measuring electronics: 9 V battery, type IEC 6F22 (1 pcs.)
measuring electronics: 9 V battery, type IEC 6F22 (1 pcs.) illumination: mignon / LR 06 / AA 1,5V (2 pcs.)
illumination: mignon / LR 06 / AA 1,5V (2 pcs.) Battery life: meas. electronics approx. 200 hours of operation
Battery life: meas. electronics approx. 200 hours of operation illumination: approx. 50 100 o r o op ra o p o a r p
illumination: approx. 50 100 o r o op ra o p o a r p Dimensions, weight (device): approx. 160 x 90 x 45 mm approx. 4 0
Dimensions, weight (device): 170 x 90 x 60mm, 450g Scope of supply: device, hay temperature probe 4m, measuring
Scope of supply: device, two part hay temperature probe (3.46m), spike, plastic case, batteries, manual
wood handle, measuring spike, plastic case, batteries, manual
Options:
Alarm / Protection
E tension rod 1 5m max. 5m
Spare elements Spare elements:

Measuring spi e 4 blade, stainless steel Fibre glass probe 4m
nstrument incl. connection cable 2m Cutter tip with integrated temperature sensor
Pac aging hose Measuring de ice incl. connection cable
Case with foam lining GKK 3 00 case with foam lining
Upper rod-part GAD 1 C NCH o o a ap r or a om a r ro
Lower rod-part
Wood handle
16
Capacitive Capacitive moisture detection
Material Moisture Measurement without damaging of material
with GREISINGER handheld instruments moisture measurement up to cm of depth
Handheld instrument
and moisture rating
Resistive measuring method
(GMR 100, GMH 3810, GMH 3830, GMH 3850)
W
The electrical resistance often depends on NE
the material moisture. Therefore the devices
measure the (possibly extremely high) val-
ues of resistance and convert them to the
displayed value by means of integrated char-
acteristic curves. The temperature has to be
compensated especially at the measurement
of wood all GREISINGER- instruments
have an integrated temperature compensa-
tion. In most cases the contact is realised
by nails that are driven into the material are
used to contact.
Capacitive measuring method

(GMK 100, GMI 15)
The dielectric properties of an object are often Measuring device moisture in Indicator for moisture in wood
a good indicator for its material moisture. The wood and buildings and buildings
dielectric coefficient of water is considerably
higher than that of dry lumbers or building GMK 100 GMI 15
The GMK 100 is a capacitive material moisture Device for high-speed determination of moisture
materials. Therefore the total dielectric coef-
measur-ing device with direct moisture display in buildings, contracting work etc.
ficient of the measuring object can be easily
in percent. It is optimally suited for home and The GMI 15 allows detection of moisture in wood
used to get its material moisture. For the handicraft. Depending on the application, it is down to a depth of approx. 3 cm and in concrete
Logger / EASYBus
measurement the device has to be applied possible to display the material moisture u or or wash floor down to a depth of approx. 4 cm.
on the material. Precondition therefore: planar the water content w . Detection of moisture behind ceramic tiles and/or
surfaces, no metallic elements. The humidity is measured by a measuring plate various wall or floor coverings.
on the back of the device. With a side-mounted To check moisture simply place device on the
Another method is to measure the material switch the measuring depth can be changed. surface to be measured - no injection into the
moisture indirectly by means of the relative With the help of measurements in different depth measuring object required.
humidity (i.e. with GMH 3330 + TFS 0100 E): a statement could be made if for example the
The humidity in a sealed hole within a material material dries already or if the moisture is just on Application e.g. for:
depends on the material moisture. By means of the surface of the material. estate agents
a so-called sorption isotherm or a corresponding (for fast control state of buildings)
table the material moisture can be calculated Features:
property management, house owners
from the humidity. Non-destructive measurement
Moisture display in percent architects
The oven dry method can be used for reference
point measurement with highest accuracy. Acoustical and visual moisture rating building experts
The moist material is weighed and afterwards dried 18 material characteristics for building contractors
Transmitter
at increased temperature until no weight loss is wood and building materials mobile homes (moist in insulations)
detectable anymore. The material moisture can 2 different measurements depth
be calculated from the moist and arid weight. polyester / GRP boats
Backlight
Specification:
Application: Display: 3 -digits, 13 mm high LCD
Units Power supply: 9V-battery (type IEC 6F22)
Wood, Concrete, Screed, Plaster, etc. Power consumption: approx. 5 mA
Material moisture u (also atro ):
Low battery warning: BAT displayed automat-
relating to dry mass Specification: ically in case of low battery.
Display: Working temperature: 0 to 50 °C
material moisture u 2 displays for material and measured value,
Temperature probe
(mass wet - mass dry ) / mass dry 100 Storage temperature: -20 to +70 °C
backlight rel. humidity: 0 to 80 %RH (non-condensing)
Particularly important for carpenters, joiners, Moisture rating: Housing: Impact resistant ABS plastic housing,
etc. Visuel: Rating of the moisture in 6 levels from approx. 106 x 67 x 30 mm (H x W x D).
WET to DRY Weight: approx. 150 g (ready for use)
Moisture content w: material moisture re- Akustisch: Signal tone Display range:
lated to wet total mass Measurement depths: 10 mm and 25 mm
concrete / floor pavement
Materials: 18 characteristic curves for wood
moisture content w and popular materials, additionally reference
0 ... 5 = dry
(mass wet - mass dry ) / mass wet 100 curve for high-resolution relative measurements 6 ... 9 = humid, normal humidity level
Working temperature: -25 to 50 °C 10 ... = wet
Particularly important for the evaluation of
Storage temperature: -25 to 70 °C wood / fibre glass reinforced polyester
combustibles.
Power supply: 9V-battery (Type IEC 6F22) 0 ... 3 0...12% : dry
Digit (GMI 15) Power consumption: approx. 0,12 mA 3 ... 6 12...20% : air-dry
Alarm / Protection
The displayed value is relative, that means Power backlight: approx. 2,5 mA 6 ... 11 20...30% : wind-dry
without a physical unit. Functions: Used-battery-display, Auto-Off- 11 ... 30% ... : wet
This can be used to get comparative moisture Function, Hold
information of the same materials. Lower Housing: impact-resistant ABS plastic housing, an easy to use
values indicate less moisture, higher values front: IP65, approx. 106 x 67 x 30 mm (H x W x D).
ut very effective device
indicate therefore more moisture. Weight: approx. 135 g (incl. battery)
Accessories: Note: The GMI 15 is an indicator for

PW 25 the fast estimation - it does not replace
or further information on this topic please see precision instruments like the GMH 3810,
the devices manuals and our homepage www. Testing probe to control the device.
GMH 3830 and GMH 3850
greisinger.de under ownload ocuments
17
Precision Material Moisture Meas. Device
Handheld instrument
for wood, building material, straw, hay, paper, textiles etc.

M
ve o PA certifi
appro
r glu ed
acc to e tim er c
66 wood characteristic curves D 1 on
05 -1 struction
Accessories spare parts
28 building material characteristic curves 1 GMK 3
measuring cable (BNC to 2 x ba-
moisture estimation nana plug) approx. 90cm long
display of moisture content u or wet-basis mois- 2 GHE 1
ture content w reciprocating piston electrode
external temperature probes connectable GSE 1
3
serial interface or impact electrode
analog output 0-1V, freely adjustable

GEG 1
Future-proof via updates handle for retrofit of impact electrode
Description: the GMH3830 offers important advan-
tages in handling, user-friendliness, functional range 5 GSG 1
retrofitted impact electrode with front
and accuracy for your metrological work. side of GSE 91 and handle GEG91
The absolute moisture content of 494 materials is dis- 6 GST 1
played directly. The cumbersome usage of calculation steel nails (3 pieces each 12, 16
tables now is history. Additionally you get a evaluation and 25 mm long) in plastic case
of your material state (wet/dry) of nearly all materials 7 GOK 1
instantly. Of course the formerly used wood groups A, surfaces-measuring caps (pair)
B, C and D of the predecessor models are further more o r o S 91 or S 91
supported. 8 GMS 300/ 1
measuring pins 300 mm long (pair)
GMH 3830 or oo p oo oo pap r ar o
Logger / EASYBus
access. not included

a . o r o S 91 or S 91
Resisti e material-moisture and temperature measuring de ice 9 GBSK 1
short brush-type probe (pair) for
General application: precision measurements Power consumption approx. 2.5 mA depth down to approx. 100 mm
in cut wood, chip board, veneer, sawdust, wood Dimensions / Weight 142 x 71 x 26 mm, 155 g 10 GBSL 1
chips, wood wool, flax, straw, hay, concrete, gas Housing Impact-resistant ABS plastic housing, long brush-type probe (pair) for
concrete, bricks, wash floor, cast, limestone mor- membrane keyboard, transparent panel. Front depth down to approx. 300 mm
tar, cement mortar, paper, carton, textiles etc. side IP65, integrated pop-up clip 11 GLP 1
User: architect, expert, inspector, building contrac- Functions conducting paste 100 ml, or r a
m a r m a p a o
tor, painter, carpenter, parquet joiner, floor tiler, Hold Auto-Hold (automatic freezing of a constant walls, wash floors etc. with brush probes
wood works, timber desiccation plant, building value), Low battery warning ( and ' bAt '), 12 GSP 1
repair company, textile industry etc. Sort (limitation of the choice of materials to up to sensor for surface measurements
8 favourites), Auto Power Off on paper, textiles etc.
Specification GMH 3830: GSP 1 ES
Measuring principle: NE
W spare sensor element for GSP 91
GMH 3 30 LW 13
Transmitter
moisture: resistive material-moisture-measuring

matching DIN EN 13183-2:2002 Complete material moisture measuring
temperature external: thermocouple, NiCr-Ni (type K) set optimized for use in agriculture
temperature internal: NTC The set consists of GMH
Characteristic cur es 494 3830 with preset mate- GSF 3 (1 m)
Measuring range rial selection (Sort) and a GSF 3 K (25 cm)
moisture: 0,0 to 100,0 % moisture content rugged insertion probe 13 injection probe (diff. meas. depths) with handle and
(depending on characteristic curve) with integrated temperature 1.5 m connection cable
temperature: -40,0...+200,0°C (-40,0...+392,0°F) (for bales of wood wool, wood chips etc.)
sensor.
1
Estimation in 9 steps (dry ... wet) The set is excellently suitable for measuring in
Resolution 0,1% resp. 0,1°C (0,1°F) hay bales and bulk goods. Putting the probe into
the medium, material moisture and temperature
Temperature probe
Accuracy de ice (at nominal temperature)

wood: ±0,2 % moisture content could be specified quick and easy.
(deviation from characteristic curve at range 6...30%) Scope of Supply
building mat.: ±0,2 % moisture content 1x GMH 3830 (measuring device incl. battery), 1x GSF GSF 3 TF (1 m)
W
38TF (injection probe), 1x BNC connection cable 1.5m, GSF 3 TFK (35 cm) NE
(deviation from characteristic curve)
1x NiCr-Ni connection cable 1.5m, 1x GKK 3500 (Koffer) injection probe (diff. meas. depths) with integrated NiCr-Ni-
temperature (external): ±0,5% v. MW ±0,3°C
temperature probe, with handle and connection cables
Temperature compensation (for bales of wood wool, wood chips, hay bales, bulk goods, etc.)
automatically or manual Accessories 15 GEF 3
Sensor connection SET 3 HF (Wood moisture set) flat electrode (for floor pavement,
moisture: BNC paper etc.)
contents:
temperature: flat pin plug (free of thermo-voltage) GKK3500 ( a ), GMK 38 (m a r 16 GPAD 3
Perm. wor ing temperature -25 to 50 °C a ), GSE 91 ( mpa ro ), GST 91 testing adapter (with 2 test points)
Display two 4 digit LCDs (12.4mm or 7mm high), ( a ), GTF38 ( mp ra r pro )
17 GTF 3
as well as additional arrows. insulated NiCr-Ni temperature probe,
Alarm / Protection
SET 3 BF ( oo a. ma r a mo r ) Ø2.2x25mm (necessary for temperature

Pushbuttons 6 membrane keys
contents: GKK3500 ( a ), GMK 38 differ ences etween wood an device)
Output 3-pin jack connector Ø3.5mm, choice (m a r a ), GSE 91 (mpa ro ),
between serial interface or analog output GST 91 ( a ), GTF38 ( mp ra r pro ),
18 GES 3
insulated NiCr-Ni injection probe
- serial interface direct connection to RS232 GMS300/91 (m a r p ), GBSK91 ( r (e.g. for wood chips), Ø4x150mm
or USB interface of a PC via electrically isolated p pro ), GLP 91 ( o pa )
19 GKK 3500
interface adapter GRS3100 or GRS3105 resp. SET 3 MPA (MPA wood moisture set) case (394 x 294 x 106 mm) with
USB3100 (p.r.t. accessories). contents: as SET38HF but instead of GSE 91 with GHE 91 punched lining for device an access.
- analog output 0...1V, freely adjustable 20 ST-RN
Power supply 9V-battery, additional d.c. con- USB 3100 USB interface converter protection pocket with openings for
nector for external 10.5-12V direct voltage supply GNG 10 / 3000 power supply sensor connections
pict.: GMH3830 in ST-RN (suita le for G 3 30, G 3 50)
(suitable power supply: GNG10/3000).
18
Measuring material moisture The handy alternati e The little brother
with data logger and user for wood and building material for wood and building material
programmable material cur es moisture measuring moisture measuring
Handheld instrument
approv MPA c
e or e
glue rtified
acc to tim er co
D 10 ns
5 -1 truction
esistive material-moisture meas evice esistive material-moisture meas evice esistive material-moisture meas evice
GMH 3850 GMH 3810 GMR 100

with data logger with integrated measuring pins with integrated measuring pins
This instrument is indispensable for the docu- The measuring pins integrated on the reinforced Small, compact measuring instrument for easy
mentation of material state by quality assurance front numerous measurings can be done without measurement of cut wood, chip, veneer, fire wood,
Logger / EASYBus
systems. additional accessories. wood briquettes, plaster, gypsum, ....
By means of the integrated data logger there can For measuring of very hard materials we sug- Integrated, e changeable measuring needles
be recorded up to 10000 measuring values and gest the components shown at the accessories 4 popular wood groups A B C D
processed on demand. Additionally there can be section.
4 material curves individually programmed by the construction materials E plaster P
user to data acquired by reference measurings Specification: Direct display of moisture content u or
with dry ovens or CM-method. wet basis water content w
This instruments finally makes the usage of paper Measuring principle
correction tables and so on obsolete. moisture: resistive material-moisture-measuring Specification:
matching DIN EN 13183-2:2002
Measuring principle resistive material-moisture-
Specification: temperature internal: NTC
measuring matching DIN EN 13183
Measuring principle Characteristic cur es 494
Characteristic cur es 4 different wood groups
moisture: resistive material-moisture-measuring Measuring range
(A, B, C, D) for a total of 130 kinds of wood,
matching DIN EN 13183-2:2002 moisture: 0,0 to 100,0 % moisture content
(depending on characteristic curve) one universal construction material group E (tables),
temperature external: thermocouple, NiCr-Ni (type K) one construction material group P = Plaster
temperature: -40,0...+200,0°C (-40,0...+392,0°F)
Transmitter
temperature internal: NTC Meas. range 0,0 to 100 % moisture content
Estimation in 9 steps (dry ... wet)
Characteristic cur es 498 (depending on characteristic curve)
Resolution 0,1% resp. 0,1°C (0,1°F) Estimation in 6 steps (dry...wet)
Sensor connection
Accuracy de ice (at nominal temperature = 25°C) Resolution 0,0 ... 19,9 %: 0,1% moisture content
moisture: BNC
wood: ±0,2 % moisture content 20 ... 100 %: 1% moisture content
temperature: flat pin plug (free of thermo-voltage) (deviation from characteristic curve at range 6...30%)
e t a te a ata e 0 building mat.: ±0,2 % moisture content De ice accuracy (at nominal temperature = 25 °C)
p g eat re (deviation from characteristic curve) wood: ±0,2 % moisture content
Temperature compensation (deviation to wood group characteristic curve, range 6...20%)
Logger functions construction: ±0,2 % moisture content
automatically or manual
-manuelly 99 data sets (visualisation via keys/ (deviation from construction curve)
Measuring probe 2 pin holders M6 0.75 with
display or interface) Temperature compensation manual
19mm pins (12mm utilisable)
-cyclic 10000 data sets (visualisation via Measuring probe 2 pin holders M6x0,75
Temperature probe
interface) Perm. wor ing temperature -25 to 50°C

with 19mm pins (12mm utilisable)
-ad ustable cycle time 30sec ... 1h Storage temperature -25 to +70°C
Perm. wor ing temperature -25 to 50°C
Logger start and stop via the keyboard or inter- Relati e humidity 0 to +95%RH o o
Storage temperature -25 to +70°C
face. Comfortable read-out and display software Display two 4-digit LCDs
Relati e humidity 0...95 %RH ( o o )
(GSOFT3050) available as additional equipment. Power supply 9V-battery, type IEC 6F22
Display 4½-digit LCD-display with additional
Real-time cloc clock with day, month and year Power consumption approx. 2.5 mA segments
User cur es 4, programmable via interface Dimensions / Weight 142 x 71 x 26 mm, 175 g Power supply 9V-battery, type IEC 6F22
0 interpolation points per cur e Housing Impact-resistant ABS plastic housing, Power consumption approx. 1.8 mA
membrane keyboard, transparent panel. Front
By means of the gratis software GMHKonfig the Housing impact resistant ABS, membrane key-
side IP65, integrated pop-up clip
interpolation points can e comforta ly edited board, transparent panel, front side IP65
Functions Hold Auto-Hold Sort Auto
and stored to the instrument. o connect the Dimensions 110 x 67 x 30 mm + needles 26 mm
instrument to a one of the interface convert Power Off (description refer to GMH3830)
Weight approx. 155 g
ers mentioned elow is needed. Functions Hold Auto-Hold Auto Power Off
Alarm / Protection
Accessories
Accessories GST 3 10 replacement pins (10 pcs.) Accessories
SET 3 HF wood moisture set GMK 3 10 GST 3 10 replacement pins (10 pcs.)
SET 3 BF wood and building material moisture set 1 m measuring cable, incl. adapter GMK 3 10 measuring cable incl.
GSOFT 3050 logger software (2 x banana plug to 2 x banana plug) adapters
llows connection of accessories ra t a a e r e p.r.t. page 1
GRS 3100 RS232 interface converter
USB 3100 USB interface converter GSE 1 impact electrode GKK 5 case (235 x 185 x 48 mm)
with foam lining
GKK 3500 case (394 x 294 x 106 mm)
p or o 3xxx r for additional accessories p.r.t. page 18 GB spare battery
miscellaneous accessories p.r.t. pages 41 - 43 miscellaneous accessories p.r.t. pages 42 - 43
1
Hand-held pressure meas. device to set standards
Handheld instrument
GMH 3111
one device for any measuring range (2.5 mbar ... 00 bar)
calibrated and fully interchangeable pressure probes
tara, hold function, min-/max-value memory, ready for bus operation
WK
Probes for following pressure ranges are available:
relative pressure 2,50 mbar ... 1000 bar rel.
pressure difference 0,00 bar ... 10,00 bar
absolute pressure 0,00 bar ... 35,00 bar
special measuring ranges upon request

Logger / EASYBus
ble
suita obes
pr
GMH 3111 (probes not included) sure
pres 22 /
23
page
GMH 3111 - ex ( device without probe)
Specification: GMH 3111 GMH 3111-ex Note to Ex- disign types:
max. display range: -19999 ... +9999 Digit -19999 ... +19999 Digit echnical changes compared to standard instrument
Transmitter
Measuring range: corresponding to used probe (valid for all 1 -e )

Overload: corresponding to used probe
Ex qualification: II 2 G Ex ib IIC T4
Resolution: corresponding to used probe
Accuracy: (device) ±0,1%FS ±1Digit (at nominal temperature = 25°C) Ref. document: EPS 09 ATEX 1 227 X
Pressure units: mbar, bar, Pa, kPa, MPa, mmHg, PSI, m, can be selected. Standards: The device meets the standards for electric
Probe connection: 1 sensor socket 1 sensor socket resources in explosion endangered areas according to
-pin screended loc able ini-D -soc et(s) for D D-sen- EN 60079-0 : 2006, EN 60079-11 : 2007
sors. utomatic probe detection and setting of meas. range upon Probe: (GMH 3111 - ex, GMH 3151 - ex, GMH 3156 - ex)
plugging in of probe.
All GMSD sensors with option 'Ex type' can be used.
Display: 2 x 4½-digit LCD 2 x 4½-digit LCD
Interface: suitable interface adapter are USB 3100,
Output: serial interface serial interface
Temperature probe
GRS3100 and GRS3105

- serial interface: direct connection to RS232 or USB interface of a PC via inter-
face converter GRS3100, GRS3105 or USB3100 (accessories). Please note the operation of the interface is not allowed
within the area!
- analog output: -- --
Power supply: 9V-battery, d.c. connector 9V-battery, d.c. connector Working temperature: -10 to +50°C
suitable 9 -battery (type F ) in scope of supply, d.c. con- Power supply: 9V-battery, d.c. connector
nector for e ternal 10.5-1 direct voltage supply.
(suitable power supply 10 000)
Please note the use of d.c. connector is not
allowed within the area! ust d.c. con
Sensor adjustment: digital offset and scale digital offset and scale
nectors of type 10 000 can be used.
input input
Tare, hold, min/max value: Alarm function: (GMH 3151 - ex, GMH 3156 - ex, GMH 3181 - ex)
The device is without a horn, in the alarm settings are
Peak value memory: -- -- only the parameter "no.so" and "off" adjustable.
Measuring cycle: 4 measurements / s 4 measurements / s
Scope of supply: device with associated leather case.
Logger functions: -- --
Alarm / Protection
Averaging function: -- --
Min-/max-alarm: -- --
Power consumption: approx. 1,6 mA (inc sensor) max. 1,6 mA (inc sensor)
Note to the pressure unit selection:
Working condition: -25 ... 50°C, 0 ... 95%RH -10 ... 50°C, 0 ... 95%RH
Power-Off-function: 1...120 min (can also be deaktivated). ( information for all 1 )
Housing dimensions: 142 x 71 x 26 mm, impact-resistant ABS plastic housing, The choice of a specific pressure unit is possible, if its
Front side IP65 Front side IP65 whole measuring range is displayable within the display
integrated pop-up clip for table -- of the device and the sensor is support these resolution.
top or suspended use.
Weight: approx. 150 g approx. 190 g (incl. case)
20
Pressure measuring device with logger
Handheld instrument
GMH 3151 GMH 3156
Special features:
WK WK
4½-digit display
probes with higher resolution up on request
logger functions
peak value memory
analog output 0-1V
1000 measurments / second
digital sensor adjustment possible
min- / max-alarm
integrated horn
Additional function of the GMH3156:

2 GMSD/MSD-probes connectable
difference measurement of two
probes
GMH 3151 (probe not included)
Logger / EASYBus
ble
GMH 3156 (probes not included) suita obes
u r e pr
s
pres 2 2/2
3
GMH 3150 - ex ( device without probe) page
GMH 3156 - ex ( device without probes) NEW

Specification: GMH3151 GMH3156 GMH3151-ex GMH3156-ex General functional description:
max. display range: -19999 ... +9999 digit -19999 ... +19999 digit Tare function: display value and the min./max
Measuring range: corresponding to used probe corresponding to used probe values memorized can be set to zero.
Overload: corresponding to used probe corresponding to used probe Hold function: by pressing a button the current
Resolution: corresponding to used probe corresponding to used probe meas. value will be memorized.
Accuracy: (device) ±0,1%FS ±1Digit (at nominal temperature = 25°C) Min./Max. value memory: memorizing of max.
Pressure units: mbar, bar, Pa, kPa, MPa, mmHg, PSI, m, can be selected. and min. values.
Transmitter
Probe connection: 1 2 1 2 Peak value memory (peak-detect):
-pin screended loc able ini-D -soc et(s) for D D-sensors. In the min-/max-value memory will be detected
utomatic probe detection and setting of meas. range upon plugging in of probe. not filtered pressure peaks or >1msec.
Display: 2 x 4½-digit LCD 2 x 4½-digit LCD Averaging function: integrates the meas. val-
Output: serial interface o. AAG serial interface o. AAG* ues during a selectable period of time and then
- serial interface: direct connection to RS232 or USB interface of a PC via interface calculates the average display value.
converter GRS3100, GRS3105 or USB3100 (accessories) Logger operation: Logger start and stop via
- analog output: 0-1V, freely adjustable (res. 12bit) 0-1V, freely adjustable (res. 12bit) the keyboard or interface. Comfortable read-out
Power supply: tter , c connector tter , c connector and display software (GSOFT3050) available as
suitable 9 -battery (type F ) in scope of supply, d.c. connector for e ter- additional equipment.
nal 10.5-1 direct voltage supply. (suitable power supply 10 000)
Low power logger mode: (only in meas. cycle
Temperature probe
Sensor adjustment: digital offset and digital offset and "slow") Only one measurement carried out at the
scale input scale input end of the respective logger cycle. The battery
Tare, hold, min/max value: life is considerably prolonged.
Peak value memory: >1 ms >1 ms For long-term recordings (eg. tightness).
Measuring cycle: "slow" 4 measurements / s 4 measurements / s Min-/Max-alarm: the measuring value is
"fast" (with filter) > 1000 meas. / s 1000 meas. / s constantly monitored if they remain within the
e etect > 1000 meas. / s 1000 meas. / s min./max. limits set (deaktivatable)
Logger functions: - Alarm: 3 different alarm settings
manually data sets: 99 99 "off" - alarm function deaktivated
-cycle data sets: 10000 000 10000 000 "on" - visual alarm via display, interface
(max. 64 recording sequences) (max. 64 recording sequences) alarm, alarm sounded via
integrated horn.
-adjustable cycle time: 1 ... 3600 seconds 1 ... 3600 seconds
"no.So." - visual alarm via display and
Averaging function:
Alarm / Protection
interface alarm
Min-/max- alarm:
- Controlling function: with the help of the
Real-time clock:
switching module GAM3000 (optionally) electric
Power consumption: max. 1.6mA (s ow o e) max. 1.6mA (s ow o e) equipment can be switched on/off or alarm
max. 7mA (f st 000H ) max. 7mA (f st 000H ) memoried (p.r.t. page 43)
Working condition: -25 to 50°C, 0 to 95 r.F. -10 ... 50°C, 0 ... 95 RH SeaLevel-correction: when connecting an abs.
(non-condensing) (non-condensing) pressure probe the barom. air press. can also be
Power-Off-function: 1...120 min (can also be deaktivated). displayed corrected to sea level "zero".
Housing dimensions: 142 x 71 x 26 mm, impact-resistant ABS plastic housing. Front side IP65 (Air pressure comp. achieved by entering the
-- pop-up clip for table top or suspended use. -- meters above sea level "zero")
Weight: approx. 150 g approx. 190 g (incl. case)
* refer to note to EX-disign types at page 20
21
Pressure sensors: for use with GMH311x, GMH315x and GDUSB1000
Handheld instrument
Application: • air and non-corrosive, non-ionising gases gases

• sensor are not suitable for water / liquids.
Relative pressure sensors: for measuring of over / under pressure and pressure difference
Specification: GMSD 2,5 MR GMSD 25 MR GMSD 350 MR GMSD 2 BR GMSD 10 BR
Measuring range: -1,999 ... +2,500 mbar -19,99 ... +25,00 mbar -199,9 ... +350,0 mbar -1000 ... +2000 mbar -1.00 ... +10.00 bar
Overload: max. 200 mbar max. 300 mbar max. 1 bar max. 4 bar max. 10.34 bar
Resolution: 0,001 mbar (0,1 Pa) 0,01 mbar (1 Pa) 0,1 mbar 1 mbar 10 mbar
Accuracy: (typ. values)
hysteresis and linearity ± 0,2 % FS ± 0,2 % FS ± 0,2 % FS ± 0,2 % FS ± 0,2 % FS
temperature influence from 0-50°C ± 1,0 % FS ± 0,5 % FS ± 0,4 % FS ± 0,4 % FS ± 0,4 % FS

Option higher accuracy available no no yes yes yes
Absolute pressure sensors: for measuring of absolute pressure

Specification: GMSD 1,3 BA GMSD 2 BA GMSD 7 BA
Measuring range: 0 ... 1300 mbar abs. 0 ... 2000 mbar abs. 0.00 ... 7,00 bar abs.
Overload: max. 4 bar abs. max. 4 bar abs. max. 10,34 bar abs
Resolution: 1 mbar 1 mbar 10 mbar
hysteresis and linearity ± 0,2 % FS ± 0,2 % FS ± 0,2 % FS
± 0,4 % FS ± 0,4 % FS ± 0,4 % FS
Logger / EASYBus
temperature influence from 0-50°C

Option higher accuracy available yes yes yes
General specification: Options, upcharges:

Sensor: piezoresistive pressure sensor.
Special pressure ranges upon request
Pressure connection: 2 connection pins for tubes 6 x 1 mm (6mm inside-Ø
and 4mm outside-Ø) Probes for Ex-protection
Electronics: PC board with amplifier and data memory for sensor ( II 2 G Ex ib IIC T4 - EPS 09 ATEX 1 227 X)
data (measuring. range/calibration etc.) integrated in
sensor housing. Higher probe accuracy by multi point calibration
Working temperature: 0 ... +70 °C Additional individual linearisation points are stored in sensor memory.
Relative humidity: 0 ... +95 %RH (non-condensing) (not possible for GMSD 2,5 MR and GMSD 25 MR !)
Storage temperature: -40 ... +80 °C
Certificate of calibration WPD5
Transmitter
Housing: ABS plastic with suspension eye, (f. ISO9000 ff.) incl. several calibration points stored in probe
dimensions do not incl. conn. pin: 68 x 32,5 x 15 mm, certificate of calibration: 5 point increase, 5 point decrease.
dimensions with connection pin: 68 x 32,5 x 27,5 mm.
Device connection: 1m PVC connection cable, screened with integral Certificate of calibration WPD10
6-pin Mini-DIN-plug, lockable (f. ISO9000 ff.) incl. several calibration points stored in probe
Weight: approx. 75 g certificate of calibration: 10 point increase, 10 point decrease.
24
TUBE, TUBE CLIPS, ADAPTER, COUPLINGS, etc.
for GMH31xx, GMSD, GDH and pressure measuring transducers.
1 GDZ-01 = PVC-tube 6/4 (6 mm outside-Ø, 4 mm inside-Ø) ( 5 bar @ 23°C)
Temperature probe
2 GDZ-2 = PVC-tube 10/7 (10 mm outside-Ø, 7 mm inside-Ø) ( 5 bar @ 23°C)

GDZ-02 = PE (polyethylene) 6/4 (6 mm outside-Ø, 4 mm inside-Ø) (10 bar @ 23°C)
3
GDZ-03 = PUR (polyurethane) 6/4 (6 mm outside-Ø, 4 mm inside-Ø) ( 9 bar @ 23°C)
4 GDZ-0 = PA (polyamide) 6/4 (6 mm outside-Ø, 4 mm inside-Ø) (25 bar @ 23°C)
GDZ-05 = Screw-type glanding for 6/4 tube with outside thread G1/8"
7 8 GDZ-06 = Increaser glanding for 6/4 tube with inside thread G1/8"
21 GDZ-07 = Double reducer for tubes with 6 inside-Ø to 6/4 tube
GDZ-08 = Double adapter for 6/4 tube to 6/4 tube
GDZ-09 = Coupling adapter (NW5) made of brass with inside thread G1/4" (suitable for D -1 )
26
GDZ-10 = Coupling adapter (NW5) made of brass for tube with 6mm inside-Ø (suitable for D -1 )
GDZ-11 = Coupling adapter (NW5) made of brass with outside thread G1/4" (suitable for D -1 )
25
Alarm / Protection
19 GDZ-12 = Coupler socket (NW5) made of brass (single-hand use) with inside thread G1/4"
18 GDZ-17 = Screw-in connection for 6/4 tube with outside thread G1/4"
GDZ-18 = Tube clamp for 6/4 tube
GDZ-19 = Tube clamp for 8/6 tube (8mm outside-Ø and 6mm inside-Ø)
GDZ-21 = T-piece for 6/4 tubes
5 17 6 GDZ-25 = Luer-Lock male to 6/4 tube
GDZ-26 = Luer-Lock female to 6/4 tube
9 10 11 12 GDZ-29 = Filter-Membrane incl. Luer-Locks (GDZ-25 and GDZ-26) (without picture) N E W
GOG-N = needle, Ø 0.9 mm - suitable to Luer-Lock male (5 pieces) (without picture)
for additional accessories refer to page
22
Stainless steel pressure sensors:
Handheld instrument
for use with GMH311x, GMH315x (p.r.t page 20 - 21) and GDUSB1000 (p.r.t page 61)
Application: • air, aggressive gases Follow-on type for GMSD-
• aggressive liquids / water, etc. stainless-steel-sensors
Absolute pres- Measuring range Overload Resolution MSD 6 BRE 0 ... 6000 mbar rel. max. 35 bar rel. 1 mbar
sure
MSD 10 BRE 0,00 ... 10,00 bar rel. max. 35 bar rel. 10 mbar
MSD 1 BAE 0 ... 1000 mbar abs. max. 5 bar abs. 1 mbar
MSD 2,5 BAE 0 ... 2500 mbar abs. max. 10 bar rel. 1 mbar
MSD BAE 0 ... 4000 mbar abs. max. 17 bar abs. 1 mbar
MSD 6 BAE 0 ... 6000 mbar abs. max. 35 bar abs. 1 mbar
MSD 100 BRE 0,00 ... 100,00 bar rel. max. 200 bar rel. 0,1 bar
Relative pressure MSD 160 BRE 0,00 ... 160,00 bar rel. max. 320 bar rel. 0,1 bar
MSD 00 MRE 0,0 ... 400,0 mbar rel. max. 2 bar rel. 0,1 mbar MSD 250 BRE 0,0 ... 250,0 bar rel. max. 500 bar rel. 0,1 bar
MSD 1 BRE 0 ... 1000 mbar rel. max. 5 bar rel. 1 mbar MSD 00 BRE 0,0 ... 400,0 bar rel. max. 800 bar rel. 0,1 bar
MSD 2,5 BRE 0 ... 2500 mbar abs. max. 10 bar rel. 1 mbar MSD 600 BRE 0,0 ... 600,0 bar rel. max. 1200 bar rel. 0,1 bar
MSD BRE 0 ... 4000 mbar rel. max. 17 bar rel. 1 mbar MSD 1000 BRE 0 ... 1000 bar rel. max. 1500 bar rel. 1 bar
MSD ... Stainless steel pressure sensors without cable

Connection cable MSD-K31 has to be ordered separatly (Accessories)
MSD-K31 1 m connection cable for MSD-senors for use with GMH 31xx and GDUSB 1000
General specification: Options, upcharges:
Logger / EASYBus
Sensor: stainless steel pressure sensor (parts coming into contact Special pressure ranges upon request
with media). Suitable for aggressive media, water, etc.
Accuracy: (typ. values) ± 0,2 %FS (hysteresis and linearity) Higher probe accuracy
± 0,4 %FS (temperature influence from 0-50°C) by multi point calibration (additional individual linearisation points
are stored in sensor memory)
Electronics: PC board with amplifier and data memory for sensor data
(meas. range, calibration, etc.) integrated in sensor housing, Probes for Ex-protection
sealed sensor electronic
Certificate of calibration WPD5
Working conditions: 0 ... +70 °C, 0 ... +95 %RH (non-condensing) (f. ISO9000 ff.) incl. several calibration points stored in probe
Storage temperature: -40 ... +80 °C certificate of calibration: 5 point increase, 5 point decrease
Pressure connection: connection thread G1/2B Certificate of calibration WPD10
(other threads or adapter on request). (f. ISO9000 ff.) incl. several calibration points stored in probe
Cable connection: M12 built-in plug certificate of calibration: 10 point increase, 10 point decrease
Housing: made of CrNi-steel
(parts coming into contact with media) Accessories:
lenght: 88,5 mm, Ø 27 mm, approx. 220 g
Transmitter
MSD-K31 Connection cable for use with GMH 31xx
Protection class: IP 67 (sensor), IP54 (plug) 1 m PVC connection cable, screened with integral 6-pin Mini-DIN-plug
and M12-socket
Note: 1 cable per device is also with several sensors sufficient
well probe / submersible probe: for use with GMH311x, GMH315x

and GDUSB1000
Application area: measurings in water, aggressive media, etc.
GMSD 1 BTS
Temperature probe
Specification:
Measuring range: 0.0 ... 1000.0 mbar rel. (0 ... 10 m) Device connection: approx. 1m PVC cable with 6-pin Mini-DIN-plug to
Overload: max. 5 bar rel. the adapter housing.
Accuracy: (typ. values) ± 0,25 %FS (hysteresis and linearity) Electronics: PC board with data memory for sensor data integrated in
± 0,02 %FS / K (TK for offset or slope) sensor housing.
Working conditions: Sensor cable: approx. 10 m, at sensor head stationary casted FEP-
Sensor head, -cable: -10 ... +70 °C cable with integrated tube for pressure balance
Adapter housing: 0 ... +50 °C, 0 ... +95 %RH (non-condensing) Sensor head: stainless steal, approx. 27 mm Ø,
Storage temperature: -30 ... +80 °C length of metal body approx. 147 mm
TUBE ADAPTER, COUPLINGS, etc.

13 GDZ-13 = Increaser/reducer made of brass with G1/2" outside thread and G1/8" inside thread
Alarm / Protection
14 15 16
GDZ-1 = Screw-in nozzle for 6/4 tube with outside thread G1/8"
GDZ-15 = Screw-in nozzle for tube with 6 mm inside-Ø with outside thread G1/4"
GDZ-16 = Screw-in nozzle for 6/4 tube with outside thread G1/4"
GDZ-20 = Screw-on connection made of brass for 6/4 tube with inside thread G1/4"
27 GDZ-22 = Coupling adapter (NW5) made of brass with tube connection 6/4 (suitable for D -1 )
GDZ-23 = Adapter G1/2" inside thread to G1/4" outside thread, made of brass
28 GDZ-27 = Manometer profile gasket (thickness 3mm, Cu) for thread G1/4"
20 22 23
GDZ-28 = Flat gasket (thickness 1.5mm, Cu) for thread G1/4"
GWA 1214 = Adapter G1/2" inside thread to G1/4" outside thread
for additional accessories refer to page
23
A series of hand-held measuring devices with integrated sensor
Handheld instrument
integrated pressure sensor

WK WK
sturdy metal connection pin
tara function / zero point offset
model with - protection available
Additional features for GMH 31 1:

peak value memory (>1 ms)
2 logger functions
analog output 0 - 1 V
min-/max- alarm
integrated horn
DIGITAL-VAC M- / BAROMETER for measuring of absolute pressure.

GMH 3161-12 (device ready for operation)
Logger / EASYBus
GMH 3181-12 (device ready for operation)

0 ... 1300 mbar abs.
Version specific data: ... - 12 General function description:

Measuring range: 0 ... 1300 mbar absolute Tare function: display value and the min./max
Overload: max. 4 bar absolute values memorized can be set to zero.
Resolution: 1 mbar Hold function: by pressing a button the current
Pressure units: mbar, bar, kPa, MPa, PSI, mmHg, m - freely select able meas. value will be memorized.
Accuracy: (typ. values) Min./Max. value memory: memorizing of max.
hysteresis and linearity ± 0,2 % FS and min. values.
temperature-influence from 0-50°C ± 0,4 % FS Serial interface: direct connection to RS232 or
Option higher accuracy available yes USB interface of a PC via electrically isolated in-
Transmitter
Sensor: integrated piezo-resistive absolute pressure sensor. terface adapter GRS3100, GRS3105 or USB3100.
uitable for air and non-corrosive, non-ionising gases. Power-Off-function: device will be automati-
( ote sensor is not suitable for water!) cally switched of if no operating takes place for
Pressure connection: 1 metal connection pin, made of brass, nickel plated, the time of the power-off delay.
pressure tubes 6x1 mm (4 mm inside-Ø) can be connected Selectable values: off, 1 ... 120 min.
For type specific data please refer to page 25 Peak value memory (peak-detect):
In the min-/max-value memory will be detected
Special function: not filtered pressure peaks >1msec.
SeaLevel-correction: The barometric air pressure can also be related to sea level zero . Logger operation: Logger start and stop via
(Correction of air pressure is achieved by entering m above zero ) the keyboard or interface. Comfortable read-out
and display software (GSOFT3050) available as
Temperature probe
additional equipment.
Low power logger mode: (only in measuring
Options (upcharges) Accessories: cycle slow ) Only one measurement carried out
at the end of the respective logger cycle. The
Higher sensor accuracy GNG 10/3000 plug-in power supply battery life is considerably prolonged.
by multi point calibration For long-term recordings (eg. tightness).
ote not possible for all device types! GKK 3000 case (275 x 229 x 83 mm) Averaging function: integrates the meas. val-
with cut-outs for GMH3xxx
Certificate of calibration WPD5 ues during a selectable period of time and then
(f. ISO9000 ff.) incl. several calibration points GRS 3100 calculates the average display value.
of sensor (stored in device memory), Certificate of interface converter, RS232, electrically isolated Min-/Max-alarm: the measuring value is
calibration: 5 points increase, 5 points decrease. constantly monitored if they remain within the
USB 3100 min./max. limits set (deactivateable)
Certificate of calibration WPD10 interface converter, USB, electrically isolated
- Alarm: 3 different alarm settings
(f. ISO9000 ff.) incl. several calibration points
Alarm / Protection
of sensor (stored in device memory), Certificate of GDZ-01 PVC-tube (5bar) off - alarm function deactivated
calibration: 10 points increase, 10 points decrease. 6/4 (6mm outside-Ø, 4mm inside-Ø) on - visual alarm via display, interface
alarm, alarm sounded via
GDZ-08 Double adapter for integrated horn.
6/4 tube to 6/4 tube no.So. - visual alarm via display and
GDZ-18 tube clamp for 6/4 tube interface alarm
Special design type (upcharges)
- Controlling function: with the help of the
Ex-protection ( II 2 G Ex ib IIC T4)
GDZ-21 T-piece for 6/4 tubes switching module GAM3000 (optionally) electric
device type with Ex-protection equipment can be switched on/off or alarm
(please refer to notes at page 0) for miscellaneous accessories monitored (p.r.t. page 43)
p.r.t. pages 22 - 23, 41 - 43
24
DIGITAL-FINE MANOMETER / MANOMETER for over/under pressure and pressure difference.
Handheld instrument
WK WK WK
GMH 3161-01 GMH 3161-07 GMH 3161-13
GMH 3181-01 GMH 3181-07 GMH 3181-13
-100 ... 2500 Pa (± 2500 Pa 1) -10,0 ... 350,0 mbar (± 350,0 mbar 1) -100 ... 2000 mbar ( 2000 mbar 1)
Logger / EASYBus
Option, upcharge:
GMH 3161-07H GMH 3161-07B MB -1...2 BAR
-1,00 ... 70,00 mbar ( 70,00 mbar 1) -10,0 ... 20,0 mbar (-7,5 ... 315,0 mmHg) measuring range: -1000 ... 2000 mbar 2
Version specific data: ... - 01 ... - 07H ... - 07 ... - 07B ... - 13
Measuring range: -100 ... 2500 Pa -1,00 ... +70,00 mbar -10,0 ... +350,0 mbar -10,0 ... +420,0 mbar -100 ... 2000 mbar
(-1,00 .... 25,00 mbar) (-7,5 .... 315,0 mmHg) (optional: -1000 .... 2000 mbar)
Overload: max. 100 mbar max. 1000 mbar max. 1 bar max. 1 bar max. 4 bar
Resolution: 1 Pa (0,01 mbar) 0,01 mbar 0,1 mbar 0,1 mbar (0,1 mmHg) 1 mbar
additional pressure units: bar, kPa, PSI, mmHg, m bar, Pa, kPa, PSI, mmHg, m bar, kPa, MPa, PSI, mmHg, m bar, kPa, MPa, PSI, m bar, kPa, MPa, PSI, mmHg, m
hysteresis and linearity ± 0,3 % FS ± 0,1 % FS ± 0,2 % FS ± 0,1 % FS ± 0,2 % FS
temperature-influence from 0-50°C ± 0,4 % FS ± 0,4 % FS ± 0,4 % FS ± 0,4 % FS ± 0,4 % FS
Option higher accuracy available no already integrated yes already integrated yes
Transmitter
Sensor: integrated piezo-resistive absolute pressure sensor.
uitable for air and non-corrosive, non-ionising gases. ( ote sensor is not suitable for water!)
Pressure connection: 2 metal connection pin, made of brass, nickel plated, pressure tubes 6x1 mm (4 mm inside-Ø) can be connected
1
measuring range possible by changing the pressure connection ports without changing the pressure connection ports
Type specific data: GMH 3161 - ... GMH 3181 - ... GMH 3160 - ... - ex GMH 3180 - ... - ex
Display: 2 x 4 -digit LCD 2 x 4 -digit LCD 2 x 4 -digit LCD 2 x 4 -digit LCD
Output: interface interface or AAG interface* interface or AAG*
- serial interface:
- analog output: -- 0 - 1V, freely adjustable -- 0 - 1V, freely adjustable
(resolution 12 bit) (resolution 12 bit)
Temperature probe
Power supply: 9V-battery, d.c. connector 9V-battery, d.c. connector 9V-battery, d.c. connector* 9V-battery, d.c. connector*
suitable 9 -battery (type F ) in scope of supply, d.c. connector for e ternal 10.5-1 direct voltage supply. (suitable power supply 10 000)
Sensor adjustment: digital offset and digital offset and digital offset and digital offset and
scale input scale input scale input scale input
Tare, hold, min/max value:
Peak value memory: -- >1 ms -- >1 ms
Measuring cycle: slow 4 measurements / s 4 measurements / s 4 measurements / s 4 measurements / s
"fast" (with filter) -- > 1000 meas. / s -- > 1000 meas. / s
peak-detect -- > 1000 meas. / s -- > 1000 meas. / s
Logger functions: -- --
-manually: 99 data sets 99 data sets
-cycle: 10000 data sets 10000 data sets
(max. 64 recording sequen.) (max. 64 recording sequences)
Alarm / Protection
-adjustable cycle time: 1 ... 3600 seconds 1 ... 3600 seconds

Averaging function: -- --
Min-/max-alarm: -- --
Real-time clock: -- --
Power consumption: approx. 0.6 mA approx. 0.6 mA (slow mode) max. 0,6 mA max. 0,6 mA (slow mode)
max. 2.5 mA (fast = 1000Hz) max. 2,5 mA (fast = 100Hz)
Working condition: -25 to +50 °C, 0 to +95 %RH (non-condensing) -10 to 50 °C, 0 to 95 %RH (non-condensing)
Housing dimensions: 142 x 71 x 26 mm (without pressure connection pin - pin approx. 11 mm protruding at front side of device), impact-resistant ABS plastic housing. Front side IP65
integrated pop-up clip for table top or suspended use. --
Weight: approx. 165 g approx. 170 g approx. 205 g (incl. case) approx. 210 g (incl. case)
* Please refer to note to Ex-disign types at page 20
25
WK WK WK
Handheld instrument
INE MANOMETER for over/under MANOMETER for over/under VAK M-/BAROMETER and
pressure or pressure difference pressure or pressure difference MANOMETER for absolute pressure
GDH 200 - 07 GDH 200 - 13 GDH 200 - 14
0.00 to 19.99 / 199.9 mbar ( 199.9 mbar) 0.0 to 199.9 / 1999 mbar ( 1999 mbar) 0 to 11000 mbar abs.
Device ready for use incl. battery Device ready for use incl. battery Device ready for use incl. battery
Logger / EASYBus
unctions: unctions: unctions:

Autorange Autorange Sea level-adjustment possible
Excellent zero point stabilisation Excellent zero point stabilisation suitable for relative pressure measurement
Manual slope adjustment Manual slope adjustment (-1...10 bar) by use the zero function
4 selectable measuring units: Pa, mbar, mmHg, PSI 3 selectable measuring units: mbar, mmHg, PSI Manual slope and offset adjustment
automatic off-function: 1 ... 120 Min automatic off-function: 1 ... 120 Min 4 selectable measuring units: mbar, mmHg, bar, PSI
automatic off-function: 1 ... 120 Min
Specification Specification Specification

Measuring range: Measuring range: Measuring range:
0.00 ... 19.99 resp. 20.0 ... 199.9 mbar (hPa) 0.0 ... 199.9 resp. 200 ... 1999 mbar (hPa) 0 ... 11000 mbar (hPa) abs.
0.00 ... 19.99 resp. 20.0 ... 150.0 mmHg 0.0 ... 199.9 resp. 200 ... 1500 mmHg 0 ... 8250 mmHg abs.
0.000 ... 1.999 PSI / 0 ... 1999 Pa 0.00 ... 19.99 PSI 0.000 ... 11.000 bar abs.
Resolution: automatic change 0.1 / 0.01 Resolution: automatic change 1 / 0.1 0.00 ...160.00 PSI abs.
Transmitter
Overload: max. 500 mbar Overload: max. 4000 mbar Resolution: 1 mbar, 1 mmHg, 0.001 bar, 0.02 PSI
Accuracy: (at nominal temperature = 25 °C and Accuracy: (at nominal temperature = 25 °C and Overload: max. 13 bar abs.
automatic ero point-adjustment) automatic ero point-adjustment) Accuracy: (at nominal temperature = 25 °C)
Measuring range: up to 200 mbar Measuring range: up to 2000 mbar ± 3 mbar or 0,1 % of m.v. (whichever is higher)
± 0,2 % f.s. hysteresis and linearity ± 0,2 % f.s. hysteresis and linearity ± 0,3 % f.s. temperature drift from 0 to 50 °C
± 0,4 % f.s. temperature drift from 0 to 50 °C ± 0,4 % f.s. temperature drift from 0 to 50 °C Sensor: piezoresistive absolute pressure sensor
Measuring range: up to 20 mbar Measuring range: up to 200 mbar Pressure connection: pressure port socket
± 1 % f.s. hysteresis and linearity ± 1 % f.s. hysteresis and linearity made of nickel-plated brass, for flexible pressure
± 2 % f.s. temperature drift from 0 to 50 °C ± 2 % f.s. temperature drift from 0 to 50 °C tubings 6x1 mm (4 mm inner-diameter), approx.
Sensor: piezoresistive relative pressure sensor Sensor: piezoresistive relative pressure sensor 11 mm protrusive.
Pressure connection: 2 pressure port sockets Pressure connection: 2 pressure port sockets Working temperature: -25 to 50 °C
Temperature probe
made of nickel-plated brass, for flexible pressure made of nickel-plated brass, for flexible pressure Display: 4 digit LCD display, approx. 12 mm high
tubings 6x1 mm (4 mm inner-diameter), approx. tubings 6x1 mm (4 mm inner-diameter), approx. Pushbuttons: 3 membrane keys
11 mm protrusive. 11 mm protrusive. Power supply: 9V battery type JEC 6 F 22 (included)
Working temperature: -25 to 50 °C Working temperature: -25 to 50 °C Power consumption: approx. 40 µA (= 7500
Display: 3 digit LCD display, approx. 13 mm high Display: 3 digit LCD display, approx. 13 mm high operating hours)
Pushbuttons: 3 membrane keys Pushbuttons: 3 membrane keys Low battery warning: BAT , automatic
Power supply: 9V battery type JEC 6 F 22 (included) Power supply: 9V battery type JEC 6 F 22 (included) Housing: impact resistant ABS plastic housing
Power consumption: approx. 250 µA (= 1200 Power consumption: approx. 250 µA (= 1200 Dimensions: approx. 106 x 67 x 30 mm
operating hours) operating hours) (H x W x D) without pressure port socket
Low battery warning: BAT , automatic Low battery warning: BAT , automatic Weight: approx. 135 g (incl. battery)
Housing: impact resistant ABS plastic housing Housing: impact resistant ABS plastic housing Sea level-ad ustment: barometric air pressure
Dimensions: approx. 106 x 67 x 30 mm Dimensions: approx. 106 x 67 x 30 mm can be displayed null based even at sea level.
(H x W x D) without pressure port sockets (H x W x D) without pressure port sockets (the pressure-adjustment is entered in metres
Alarm / Protection
Weight: approx. 135 g (incl. battery) Weight: approx. 135 g (incl. battery) above null )
Auto-Off- unction: 1...120 min (can be deacti- Auto-Off- unction: 1...120 min (can be deacti- Auto-Off- unction: 1...120 min (can be deacti-
vated either). vated either). vated either).
Min./Max. value memory: Memorizing of max. Min./Max. value memory: Memorizing of max. Min./Max. value memory: Memorizing of max.
and min. values. and min. values. and min. values.
ero point-ad ustment: automatically ero point-ad ustment: automatically ero point-ad ustment: automatically
Slope-ad ustment: manually Slope-ad ustment: manually Slope-ad ustment: manually
ero function: Display value and min-/max ero function: Display value and min-/max ero function: Display value and min-/max
value are set to null. value are set to null. value are set to null.
Tubes clamps adapters accessories Tubes clamps adapters accessories Tubes clamps adapters accessories
etc. p.r.t. pages 22/23 42/43 etc. p.r.t. pages 22/23 42/43 etc. p.r.t. pages 22/23 42/43
2
WK WK
Precision barometer
Handheld instrument
for professional usage in measurement
technology as well as in spare time
sports
resolution 0.1 mbar
for simple determination of a build-

ing si e (steeples skyscrapers
bridges etc.)
further application areas:

hiking hang gliding cycling motor-
sports etc.
BAROMETER altimeter / barometer / thermometer
GPB 3300 GTD 1100

Device ready for use incl. battery Device ready for use incl. battery
Logger / EASYBus
unctions: unctions:
manual offset and slope adjustment manual offset and slope-adjustment
sea level-adjustment possible sea level-adjustment possible
2 measuring units selectable: mbar, mmHg tendency-meter, summing-function (ascendency, descendency, overall)
Auto-off-function: 1...120 Min over 6.000 operating hours
Measuring ranges: Measuring ranges:
300.0 ... 1100.0 mbar (hPa) abs. Temperature: -10,0 ... +50,0°C, Res. 0,1°C or 14,0 ... +122,0°F, Res. 0,1°F
225.0 ... 825.0 mmHg abs. Pressure: 300,0 ... 1100,0mbar, Res. 0,1mbar or 225,0 ... 825,0mmHg, Res. 0,1mmHg
Max. Overload: 4000 mbar resp. 300 mmHg High: -500 ... -200m, Res. 1m or -1640 .. .-655ft, Res. 5ft
Accuracy: (at nominal temperature) -200 ... 2000m, Res. 0.5m or - 654 ... 1999ft, Res. 2ft
± 2.0 mbar (typ., at 0 - 50 °C) 2000 ... 9000m, Res. 1m or 2000 ... 19999ft, Res. 5ft
Sensor: piezoresistive abs. pressure sensor Measuring units: hPa / mbar, mmHg, °C, °F, m, ft
Transmitter
integrated in housing. Max. Overload: pressure:4000 mbar resp. 3000 mmHg
Nominal temperature: 25°C Accuracy: (at nominal temperature = 25°C)
Operating temperature: -25 to 50 °C Temperature: ±1% FS ± 1digit
Display: 4 -digit, 12 mm high LCD-display Absolute pressure: ±1.5mbar ±1 digit (750...1100mbar), with certificate of calibration: ±0.5mbar ± 1digit
Pushbuttons: 3 membrane key for ON/OFF, Sensor: piezoresistive absolute pressure sensor, integrated in housing.
min-/max-value memory, tara, etc. Operating conditions: -10 to 50 °C; 0 to 80 %RH (non condensing)
Power supply: 9V battery type IEC 6F22 Storage temperature: -20 to 70 °C
Power consumption: approx. 60 µA measuring-fre uency: 1 measurings / sec.
(= 5000 operating hours) Display: approx. 12 mm high, 4 -digit LCD-display
Low battery warning: BAT , automatic Controls: keypad (3 push-buttons) for On/off, min/max-value, tara-function, zero-, slope-,
Housing: impact resistant ABS housing and sea level-adjustment slide switch for unit selection.
Temperature probe
Dimensions: approx. 106 x 67 x 30 mm (HxWxD) Power supply: 9V battery type IEC 6F22 (included)
Weight: approx. 135 g (incl. battery) Power consumption: approx. 50 µA (= over 6.000 operating houres with standard zinc carbon batteries)
Sea level-ad ustment: barometric air pressure Low battery warning: BAT , automatic in case of low voltage
can be displayed null based even at sea level. Housing: impact resistant ABS housing, lucent screening grid. front IP65
(the pressure-adjustment is entered in metres Dimensions: approx. 106 x 67 x 30 mm (H x W x D)
above null ) Weight: approx. 135 g (incl. battery)
Auto-Off- unction: 1...120 min (can be deacti- Sea level-ad ustment: barometric air pressure can be displayed null based even at sea level. (the
vated either). pressure-adjustment is entered in metres above null )
Min./Max. value memory: Memorizing of max. Tendency-meter: for fallng / rising air pressure
and min. values. Sum-function: Displaying the elevation (in metres for ascendency, descendency, overall)
ero point-ad ustment: automatically Min./Max. value memory: Memorizing of max. and min. values.
Slope-ad ustment: manually ero function: Display-value, min-/max-value are set to null (altitude and air pressure)
ero function: Display value and min-/max value Auto-Off- unction: 1...120 min (can be deactivated either).
Alarm / Protection
are set to null. ero point- and slope-ad ustment: manual adjustment (for temperature and air pressure)
ero function: Display- and min-/max-value are set to null.
System Notifications: permanent self-diagnosis and error indication.
Accessories Accessories
GKK 252 small case GKK 252 small case Certificate of calibration, WPD 5
(235 x 185 x 48 mm) with foam lining (235 x 185 x 48 mm) with foam lining 5 points rising, 5 points falling
GB 9 V spare battery GB 9 V spare battery
other accessories p.r.t. page 42/43 other accessories p.r.t. page 42/43 calibration certificate, p.r.t. page 4
2
pressure measuring instrumtents with analog output 0 - 1 V
WK WK WK WK WK
Handheld instrument
DIGITAL MANOMETER for over/ DIGITAL MANOMETER for over/ DIGITAL-VAK M-/BAROMETER
under pressure or pressure difference under pressure or pressure difference for absolute pressure measurements
GDH 01 AN (0...1999 Pa) GDH 13 AN (0...1999 mbar) GDH 12 AN

Device ready for use incl. sensor (pluig-in), bat-
GDH 07 AN (0...199,9 mbar) GDH 14 AN (0...10,00 bar) tery and mains operation possible,
Logger / EASYBus
Device ready for use incl. sensor (pluig-in), bat- Device ready for use incl. sensor (pluig-in), bat- analog output: 0-1V
tery and mains operation possible, tery and mains operation possible,
analog output: 0-1V analog output: 0-1V
Specification: GDH 01 AN GDH 0 AN GDH 12 AN GDH 13 AN GDH 14 AN

Measuring range: 0 ... 1999 Pa relative 0,0 ... 199.9 mbar rel. 0 ... 1300 mbar abs. 0 ... 1999 mbar (hPa) rel. 0,00 ... 10,00 bar rel.
(0 ... 19.99 mbar)
Overload: (no destruction max. 10000 Pa rel. max. 1 bar rel. max. 2 bar abs. max. 4 bar rel. max. 10,34 bar rel.
or new calibration of sensor)
Resolution: 1 Pa (0,01 mbar) 0,1 mbar 1 mbar 1 mbar 0,01 bar
Accuracy (device): 1 Pa ±1 digit 0,1 mbar ±1 digit 1 mbar ±1 digit 1 mbar ±1 digit 0,01 bar ±1 digit
(at nominal temperature = 25°C)
Temperature drift (device): ±0,01 %/K
Sensor: (relative pressure) piezoresistive relative pressure sensor, externally mounted in plastic case, 2 connection pins for plastic tube 6 x 1 mm (4
mm inner Ø), approx. 1 m of 4-wire PVC connecting cable with Mini-DIN 4-pin plug.
Transmitter
Sensor: (absolute pressure) piezoresistive absolute pressure sensor, externally mounted in plastic case, 1 connection pins for plastic tube 6 x 1 mm (4
mm inner Ø), approx. 1 m of 4-wire PVC connecting cable with Mini-DIN 4-pin plug.
Application area: Sensor suitable for air and non-corrosive and non-ionising gases and liquids.
Sensor accuracy: (typical values)
hysteresis and linearity ± 0,5 % f.s. ± 0,2 % f.s. ± 0,2 % f.s. ± 0,2 % f.s. ± 0,2 % f.s.
temperature drift (0 - 50°C) ± 0,4 % f.s. ± 0,4 % f.s. ± 0,4 % f.s. ± 0,4 % f.s. ± 0,4 % f.s.
for option double accuray ± 0,1 % / ± 0,2 % f.s. ± 0,1 % / ± 0,2 % f.s. ± 0,1 % / ± 0,2 % f.s. ± 0,1 % / ± 0,2 % f.s.
Working temperature: 0 to 50 °C (device)
-40 to +85°C (sensor), Temperature of sensor will be compensated from 0 to 70° C
Display: 3 digit LCD display, approx. 13 mm high
Temperature probe
Power supply: 9V battery type JEC 6 F 22 (included).

Additional power supply socket for 2.5 mm Ø jack connector (automatic battery disconnection)
Power consumption: approx. 5 mA
Low battery warning: BAT
Analog output: 0...1 V = 0...1999 Pa 0...1 V = 0...199,9 mbar 0...1 V = 0...1300 mbar 0...1 V = 0...1999 mbar 0...1 V = 0...10,00 bar
socket for 3,5 mm Ø jack connector (included)
Dimensions: approx. 150 x 86 x 30 mm (H x W x D), impact resistant ABS plastic housing with integrated pop-up clip for table-top or
suspended use, clips for lateral mounting of probe.
Dimensions sensor case: approx. 26 x 67.5 x 15 mm (H x W x D) with suspension eye.
Weight: approx. 320 g (incl. battery and sensor)
Options: Accessories: (for pressure connection)

sensor with double accuracy GKK 1100 case GDZ-01 PVC-tube (5bar)
Alarm / Protection
(not available for GDH01AN) (340 x 275 x 83 mm) with foam lining for 6/4 (6mm outside-Ø, 4mm inside-Ø)
universal use GDZ-08 Double adapter for
Accessories: GKK 3000 case 6/4 to 6/4 tube
GB 9 V spare battery (275 x 229 x 83 mm) with punched lining suitable GDZ-16 Reducer for 6/4 tube
for all devices of the GMH3xxx-series with external thread G1/4
GNG 10 power supply
GKK 3100 case GDZ-18 Tube clamp for 6/4 tube
GAK 9 V accu 9V (275 x 229 x 83 mm) with foam lining for
GLG 1300 accu charger for universal use
GDZ-21 T-piece for tubes 6/4
charging of two 9V accus at the same time
GKK 252 small case additional tubes, clamps,
(235 x 185 x 48 mm) with foam lining additional accessories p.r.t. page 2/ 3 accessories, etc. p.r.t. page 22, 23
2
Compact CO - measuring device
Handheld instrument
GCO 100
3 display units selectable (ppm, mg/m and CO Hb)
Freely adjustable alarm boundaries - integrated acoustic alarm
Alert at exceeding the maximum concentration at work (MAK/AGW)
Automatic ero point adjustment
Max. value memory, hold function
Interface for RS232- or USB-adapter
Low power consumption ( 1000 hours with normal 9V-battery)
Battery or power adapter operation, Power-Off-function
External switching module for 230V/10A ( GAM3000) directly plugable
Calibration protocol within scope of supply
Integrated measuring element - 3 years warranty for the sensor
Logger / EASYBus
GCO 100
Specification: General:
Measuring principle: electrochemical CO measuring cell Carbon monoxide (CO) is created by the combustion of carbon. Depending
Measuring range: 0 ... 1000 ppm CO-Concentration on the effectiveness of the combustion (oxygen supply) and the temperature
Display ranges: 0 ... 1000 ppm CO-Concentration of the combustion more or less CO gas is created.
0 ... 1250 mg/m CO-Concentration The gas is inflammable and highly toxic. It is invisible, tasteless, scentless
0 ... 60.0 % CO Hb (estimation via exhaled breath gas) and lighter than air.
Even smallest concentrations are dangerous for humans
Resolution: 1 ppm , 1 mg/m or 0.1 % CO Hb
Measuring element: integrated in device, measuring inlet at front plate, Therefore a directive exists in Germany, which limits the maximum con-
with inner thread for accessories screw in centration of CO gas at work (MAK / AGW) to 30 ppm
Transmitter
Life time: >5 years at proper usage at air
Application areas:
suggested test interval: every 6 months (depending
on precision requirements) Control of the air quality (e.g. at work place)
Accuracy: (at range 0 ... 500 ppm),
• Checking of heating systems, gas central-heating, fireplace
linearity: < ±5 % of measured value
repeatability: < ±5 % of measured value Control of the air at maintenance work (tunnel, gas central-heating, ...)
Interference: (extract) Detection of CO in the breath of smoker (% CO Hb)
Concentration (ppm) residence time (min.) display (ppm)
• Cognition of CO poisoning i.e. at burnings (fire fighters, ...)
sulphur dioxide 50 600 <1
nitrogen dioxide 50 900 -1 Price, accessories:
Temperature probe
nitric oxide 50 5 8
hydrogen 100 5 20 ESA 100 tube-adapter/flow diverter
to screw in front plates.
Carbon dioxide 5000 5 0 MSK 100 GRV 100 ZOT 369
Display: approx. 11 mm high, 4 -digit LC-display ZOT 369 T-piece

Pushbuttons: 3 membrane keys GRV 100 non return valve ESA 100
Nominal temperature: 25 °C
Ambient condition: -10 ... +50 °C, 15 ... 90 %RH (non-condensing) MSK 100 mouth peace of plastic
Storage temperature: -10 ... +50 °C GAS 100 extension set for inhaled air control
Power supply: 9V-battery, type IEC 6F22 (in scope of supply) (consisting of ESA100, OT369, GRV 100 and 5x MSK100)
as well as additional d.c. connector for external GZ-10 test gas cap GCO (for controlled flow with test gas)
10.5 - 12V direct voltage supply.
(suitable power supply: GNG 10 / 3000) GZ-02 gas bottle with 12l test gas: 30 ppm CO
Power consumption: <0.25 mA (>1000 operating hours) GZ-03 gas bottle with 12l test gas: 300 ppm CO
Alarm / Protection
Housing: impact-resistant ABS plastic housing, membrane GZ-0 gas valve unit MiniFlo for gas bottles with 12l
keyboard, transparent panel. Front side IP65, inte-
grated pop-up clip for table top or suspended use. GB 9 V spare battery 9V / approx. 300mA/h, type IEC 6F22
Dimensions: 142 x 71 x 26 mm (H x W x D) GLI 9 V lithium battery 9V / approx. 1200mA/h
GKK 3000 case (275 x 229 x 83 mm) with punched lining
Device functions:
Hold function by keypress the current measuring will be frozen USB 3100 interface converter to USB, elec. isolated
Max value memory the max. measured value will be stored GAM 3000 switching module for 230VAC/10A (refer to page. 43)
Alarting adjustable alarm rail, value depending alarm sound
Power-Off-function device will turn of after the set period off time (1-120 for additional accessories please refer to page 1 - 3
29
Residual oxygen meas. device Air oxygen measuring device
for quick and cost-effective measure-
Handheld instrument
ment of residual oxygen Double display for oxygen and temperature

WK
Measured units: O2-concentration and
O2-partial pressure
Alarm detector with integrated horn
Automatic temperature compensation
Min./Max. value memory, Hold function
Serial interface, device can be connected
to bus system (up to 5 devices can be con-
nected to one PC interface)

Battery and d.c. operation
GMH 3691 GOG Wide range of application
Application:
Most simple calibration in atmospheric air
Essentially there, where delicate products are
conserved by low-oxygen atmospheres (protec-
tive gas), this instrument is suitable to check the
residual oxygen content. GMH 3691 Sensor not included - please order separately!
packaging industry
food industry Specification:
Measuring ranges: Calibration: 1-point calibration: extremely
Logger / EASYBus
Oxygen concentration: 0,0 ... 100,0 % O2 simple quick calibration in atmospheric air. (press
Specification: (summary) (gaseous) button to compensate unit to 20.9%).
Partial oxygen pressure: 0 ... 1100 hPa O2 2-point calibration: first point at atmospheric air
Meas. range: 0,0 ... 100,0 % O2 (O2-concentration)
Temperature: -5,0 ... 50,0 °C (20.9%), second point freely selectable
Accuracy: (whole system - during carefully
Accuracy: (device) (at nominal temperature = 25°C)
calibration and measuring) Application: Wide range of application for your
Oxygen concentration: ±0.1% ±1digit
1-point-calibration: ±0.2 %O2 ±1 digit home, job and hobby! For example:
(for concentrations < 10%) Partial oxygen pressure: ±1 hPa ±1digit
Temperature: ±0.1°C ±1digit - Bio chemistry: Oxygen monitoring in breeding
2-point-calibration: ±0.1 %O2 ±1 digit chambers for cell cultures. Monitoring of fermen-
(for concentrations < 10%) Oxygen electrode: for suitable sensores
ting process of fruits in fermentation plants etc.
Oxygen probe: Oxygen-partial pressure probe, p.r.t. page 1
- Medicine: Monitoring of oxygen concentration
built in external sensor housing Sensor connection: 6-pin screened Mini-DIN- in respirators; checking of breathing, monitoring
Response time: T90 < 10 sec., depending on socket. of oxygen concentration in incubators, oxygen
temperature Display: two 4 digit LCDs (12.4mm or 7mm high), tents etc.
Operation life: warranty for sensor element as well as additional arrows. - Food technology: Monitoring of residual oxygen
12 months (appropriate appli- Pushbuttons: 6 membrane keys for ON/OFF- in packages (e.g. coffee, tea, etc.). Monitoring of
Transmitter
cation and ambient pressure) switch, selection of meas. range, min- and max- oxygen content during production processes.
Working pressure: 0.5 to 2.0 bar abs. value memory, hold-function, calibration etc. - Safety technology, safety at work:
Over-/under-pressure: max. 0,25 bar Working temperature: 0 to +50°C Oxygen monitoring in mines/pits, underground
Working temperature: 0 to 50°C (sensor), Relative humidity: 0 to +95%RH (non-condensing) parking lots, wine cellars, cooling chambers,
-20 to 50°C (device) Storage temperature: -20 to +70°C greenhouses or stores. Oxygen monitoring or
alarm in case of danger of suffocation when
Relative humidity: 0 to +95%RH (non-condensing) Interface: serial interface,
working in tanks, wells etc.
Storage temperature: -15 to 60°C (sensor), direct connection to RS232 or USB interface of
- Air conditioning and ventilation technology:
-20 to 70°C (device) a PC via electrically isolated interface converter
Oxygen measurements, air quality monitoring,
Power supply: 9V battery type IEC 6F22 GRS3100 or GRS3105 resp. USB3100 (p.r.t.
measuring of oxygen concentration in enclosed
Dimensions case: approx. 394 x 294 x 106 mm accessories).
air conditioning systems, etc.
Weight: approx. 1400g (cpl. set) Power supply: 9V-battery, type IEC 6F22 (in-
Temperature probe
- Sport: Checking of oxygen content in com-

cluded), as well as additional d.c. connector for
pressed air breathing apparatuses (diving, etc.),
for additional technical data refer to external 10.5-12V direct voltage supply. (suitable
oxygen monitoring for gliding.
GMH3691 and accessory sensors p. 31 power supply: GNG10/3000)
Power-Off-function: 1...120min (can also be The device can only be used to check during
deaktivated). these applications. -> no substitute for ap-
Scope of supply: proved monitoring device!
Instrument GMH3691, hand pump with air tube, Power consumption: approx. 1.5 mA
GOG oxygen sensor with penetration needle, case Low battery warning: and bAt
GKK3500, spare needle 0,9mm, rubber foam Dimensions: 142 x 71 x 26 mm (H x W x D)
sticker (40 pieces), operating manual. Impact-resistant ABS plastic housing, membrane
keyboard, transparent panel. Front side IP65, Accessories:
integrated pop-up clip.
Spare elements, accessories: Weight: approx. 160 g (cpl. with battery)
Suitable sensores p.r.t. page 31
GOG-SET Set without instrument Functions: GKK 3000 case (275 x 229 x 83 mm)
Alarm / Protection
Scope of supply: GOG oxygen sensor with Min-/Max-value memory: max. and min. values with punched lining suitable for GMH3xxx
penetration needle, hand pump with air tube, case will be memorized. GRS 3100 interface converter,
GKK3500, spare needle and 40 rubber foam sticker Hold function: by pressing a button the current electrical isolated, for RS232
GOEL 370 spare sensor element meas. value will be memorized.
Alarm: integrated limit detector for min. or max. GRS 3105 interface converter
GOG-N needle, Ø 0.9 mm (5 pieces) alarm. with 5 connection points, electr. isolated, for the
connection of 5 GMH3xxx to one PC (RS232).
GOG-A rubber foam sticker (40 pieces) Temperature compensation: automatic via tem-
perature sensor, integrated in probe housing. ST-R1 device protection bag
ST-R1 device protection bag Air pressure compensation: The O2 concen- with cut-out for probe connection
with cut-out for probe connection tration will be compensated according to the abs. for add. accessories p.r.t. pages 1 - 3
for add. accessories p.r.t. page 2/ 3 atmospheric pressure set (500...2000hPa).
30
Atmospheric oxygen sensores Compact
air oxygen meas. device
for devices of the GMH369x series
Handheld instrument
closed sensor type open sensor type WK
suitable for under and over pressure suitable for air- or gas-stream
for using in gas-tight systems quick temperature compensation
Application: Application:
Suitable for measuring in normal atmosphere Because of the special sensor construction the
and in systems without or with slight under or measuring gas streams optimally around the sen-
over pressure. The sensor type features a screw sor and escapes through holes in the housing into
thread and can be built in gas-tight in almost every the air. No pressure build-up at slight streaming of
system directly resp. with tube-adapter the probe, that falsify the result of measurement. GOX 100
Particularly suitable for measuring of gas out of
gas-bottle etc. Even measuring indoor-gas con- for universal applications
centration is possible. 1-Button Calibration
Logger / EASYBus
Automatic Power-Off
W W
GGO 370 NE GOO 370 NE Min-/max- value memory
universal applications, diving universal applications, diving Incl. sensor GOEL 370
W
GGO 369 S GOO 369 S GOX 100T NE
O2 sensor for high CO2 concentration O2 sensor for high CO2 concentration for diving applications
1-Button Calibration
Specification: GGO/GOO 370 GGO/GOO 369 S MOD-Display (Maximum Operating Depth)
Application: universal applications, diving CO2 containing gases HOLD function
Specific features: Stronger membrane Acidic electrolyte Incl. sensor GOEL 370
Coated electronics
temperature compensation Specification:
Measuring range: Meas. range: 0,0 ... 100,0 % O2
Transmitter
Partial oxygen pressure: 0 ... 1100 hPa O2 0 ... 300 hPa O2 Accuracy typ.: ± 0,1 % O2 ± 1 digit
Oxygen concentration: 0,0 ... 100,0 % O2 0,0 ... 25,0 % O2 calibrated device (range from 15 to 40 % O2)
Temperature: 0,0 ... 45,0 °C 0,0 ... 50,0 °C MOD (GOX 100T): 0 ... 100 m / 0 ... 199 ft
Response time: T90 <10 sec. <15 sec. Sensor Connection: jack-connector cable
Operating conditions: 0 - 45 °C 0 - 50 °C Sensor: Oxygen-partial pressure probe,
0 - 95 %RH 0 - 95 %RH mounted in external sensor housing
Ambient pressure: 0,5 to 2,0 bar abs. 0,5 to 2,0 bar abs. Warranty: 12 months
Over-/under-pressure: max. 0,25 bar Working pressure: 0,5 to 2,0 bar absolute
(pressure difference sensor membrane to ambient sensor screwed-in) Over-/under-pressure: max. 0,25 bar
Storage temperature: -15 to +60 °C Working temperature: 0 to 45°C (sensor)
Operation life: approx. two years (warranty for sensor element: 12 months)
Temperature probe
-20 to 50°C (device)

Sensor: GOEL 370 GOEL 369 S Relative humidity: 0 to +95%RH
Oxygen-partial pressure probe, mounted in external sensor housing Power supply: 9V battery type IEC 6F22
Connection: approx. 1,3 m cable with Mini-DIN-plug.
Power consumption: approx. 120µA (over 2500 h)
Dimensions of housing: GGO369..: approx. Ø 36 mm x 95 mm (150 mm incl. anti-buckli. glanding),
Display: 3 -digit, 13mm high LCD-display
GOO369..: approx. Ø 40 mm x 105 mm (160 mm incl. anti-buckl. glanding)
Housing: ABS-enclosure, front side IP65
Housing with M16 x 1-screw thread (sensor can be connected to line
tubes by means of an additional adapter) Dimensions: approx. 106 x 67 x 30 mm
Weight: approx. 135 g (GGO...) or approx. 145 g (GOO...) Weight: approx. 185g
Scope of supply: sensor, tube-adapter, sensor, tube-adapter, Features: BAT, Auto-Power-Off
flow diverter, T-piece flow diverter Scope of supply:
Device incl. sensor, T-piece, flow diverter
Options: (for all types)
cable length m Options:
Alarm / Protection
cable length 10m - LACK encapsulated PC board

(for applications where condensation is possible)
Spare peaces, accessories:

Spare elements, accessories: GOEL 370 spare sensor
GOEL 370 spare sensor element for replacement by user ESA 369 spare tube-adapter
ZOT 369 spare T-piece
GOEL 369 S spare sensor element for replacement by user GKK 252 case (235 x 185 x 48 mm)
ESA 369 spare tube-adapter M16x1, for tubes with a inner-diameter of 15mm with foam lining
for add. accessories p.r.t. page 2/ 3
31
Conductivity measuring devices
Handheld instrument
Wide measuring range from 0,0 µS/cm to 200,0 mS/cm

WK
manually selectable or automatic range selection
Double display for conductivity and temperature
Display of resistance, salinity or TDS (dry residue of filtrate)
Conform to the regulations of the drinking water ordinance (TrinkwV 2001)
and DIN EN 27888
Automatic temperature compensation, reference temp. (20°C/25°C) selectable
Setting of different temperature coefficients

Extremely small measuring probe (dimensions as for pH-probe)
Min./Max. value memory, Hold function,
Serial interface, device can be connected to bus system (up to 5 de-
vices can be connected to one PC interface)
GMH 3430 Pushbuttons: 6 membrane keys for ON/OFF-switch, selection of

Conductivity measuring device incl. probe meas. range, min- and max-value memory, hold-function, etc.
Logger / EASYBus
Power supply: 9V-battery, type IEC 6F22 (included) as well as

additional d.c. connector (internal pin Ø 1.9mm) for external 10.5-12V
Specification: direct voltage supply. (suitable power supply: GNG10/3000)
Measuring range:
Power-Off-function: Device will be automatically switched off if no
Conductivity: 0,0 ... 200,0 µS/cm
key is pressed/no interface communication takes place for the time
0 ... 2000 µS/cm
of the power-off delay. The power-off delay can be set to values
0,00 ... 20,00 mS/cm
between 1 and 120 min.; it can be completely deactivated.
0,0 ... 200,0 mS/cm
manual setting or auto range
Low battery warning: and bAt
Temperature: -5,0 ... +100,0°C Power consumption: approx. 3.5 mA (meas. power not incl.)
Resistance: ( GMH3430) 0,005 ... 100,0 kOhm Housing dimensions (device): 142 x 71 x 26 mm (H x W x D)
Salinity: ( GMH3430) 0,0 ... 70,0 Impact-resistant ABS plastic housing, membrane keyboard, trans-
TDS: ( GMH3430) 0 ... 1999 mg/l parent panel. Front side IP65, integrated pop-up clip for table top
Resolution: 0,1 µS/cm; 1 µS/cm; 10 µS/cm or 0,1mS/cm or suspended use.
Transmitter
0,1 °C Electrode dim.: approx. 120mm long, Ø approx. 12mm, 1m of

0,001 kOhm; 0,01 kOhm or 0,1 kOhm fixed connection cable between electrode and device.
0,1 (salinity) Weight: approx. 255 g (incl. batteries and measuring cell)
1 mg/l Automatic temperature compensation: The conductivity is
Accuracy: ( ±1digit) (at nominal temperature = 25°C) highly dependant on the temperature, i.e. it is only valid for one
Conductivity: ±0,5% of m.v. ±0,3% FS or ±2µS/cm temperature. For better comparison the device offers the possibility
Temperature: ±0,2% of m.v. ±0,3K to compensate the conductivity to a reference temperature (adjust-
Cell constant: adjustable from 0.800 ... 1.200 cm-1 able 20°C or 25°C).
Temp. compensation: automatic or off Temperature measurement: The temperature of the agent can be
Compensation coefficient: displayed by means of the temperature probe integrated in the electrode.
Temperature probe
- nLF: non-linear function of natural water according to AutoRange: Automatic selection of to the optimum meas. range
EN27888 (DIN38404) for conductivity measurements. AutoRange mode can be deacti-
(reference temperature adjustable 20°C or 25°C) vated by pressing a button.
- Lin: linear compensation from 0,3 ... 3,0 %/K Salinity determination: Salinity is understood to be the sum of con-
(reference temperature adjustable 20°C or 25°C)
centrations of all salts dissolved in water. Reading in g/kg.
- off: no compensation
TDS-determination (dry residue of filtrate): The dry residue of filtrate
Display: 2 four digit LCDs (12.4mm and 7mm high) for conductivity is understood to be the concentration of substances dissolved in a
(resistance, salinity, TDS) and temperature, min./ max values, hold liquid. Reading in mg/l.
function, etc. as well as additional functional arrows.
Measuring cell: 2-pol conductivity measuring cell; temperature Optionen:
sensor integrated in shaft. Electrode material: graphite.
The graphite electrodes are the optimum solution for sewage and - LTG
can be cleaned easily.
Alarm / Protection
for organic matter (alcohol, petrol, diesel)

Warranty for sensor element: 12 months up to max. 1000 μS/cm
Working temperature:0 to +50°C (device)
with glass shaft, unplatinized, W
meas. cell: 0 to +80°C (permanent) 0 to +100° C (short time) NE
1,35 m PUR-cable, fix connected with device
Min/Max-value memory: max. and min. values as well as the cor- Accessories:
responding temperature will be memorized.
GKL 100 100ml conductivity control solution
Hold function: the current meas. value will be frozen . (100ml bottles with 1413 μS/cm. (pursuant to DIN EN 27888))
Interface: serial interface, direct connection to RS232 or USB in-
terface of a PC via electrically isolated interface converter GRS3100 miscellaneous accessories (case, power supply, etc.)
or GRS3105 resp. USB3100 (p.r.t. accessories). suitable for all GMH3xxx devices p.r.t. p. 1 - 3
32
Conductivity measuring devices
Handheld instrument
Highlights:
WK 3 conductivity measuring ranges WK
Low power consumption

Automatic measuring range change-over
Min/max-value memory
Automatic temperature compensation
via integrated temperature sensor
Hold function
Adjustable
Area of application: Area of application:

Fresh and sea water aquaristics Checking of pure and ultra-pure water
Logger / EASYBus
Fish farming / water monitoring Checking of boiler water
Drink water monitoring, etc. Functional check of ion exchangers
GLF 100 Universal conductivity measuring device
GLF 100 RW Conductivity meter for ultra-pure water
Specification GLF 100 GLF 100 RW The measuring cell

Measuring ranges: The measuring head is designed without compromise. The
Conductivity: 0 ... 2000 µS/cm 0.000 ... 2.000 µS/cm holes ensure the well exchange of the measuring fluid, none-
0.00 ... 20.00 mS/cm 0.00 ... 20.00 µS/cm theless the sensor is protected against mechanical loads.
Transmitter
0.0 ... 100.0 mS/cm 0.0 ... 100.0 µS/cm The integrated temperature sensor has very quick response
Temperature: -5.0 ... +100.0 °C -5.0 ... +100.0 °C time. Compared to simpler electrode designs the measure-
TDS: 0 ... 2000 mg/l -- ments are much more accurate and faster.
Salinity: 0.0 ... 50.0 g/kg --
GLF 100:
Resistivity: -- 0.0100 ... 0.2000 MΩ*cm
-- 0.010 ... 2.000 MΩ*cm Graphite used as material for the
-- 0.01 ... 20.00 MΩ*cm electrodes makes the applicability up
to 100 mS/cm possible a must have
Accuracy: (±1 digit, at nominal temperature = 25 °C) in seawater analytic
Conductivity: ±0.5 % of m.v. ±0,5 % FS typ. ±1% of m.v. ±0,5 % FS
Temperature: ±0.3 °C ±0.3 °C GLF 100 RW:
Temp.-compensation: off: deactivated off: deactivated Universal applicability at highest
Temperature probe
nLF: non-linear, cc to 888 nLF: non-linear, cc to 888 standards is made possible by the use
-- LIN: linear, with adjustable of stainless steel electrodes (1.4404,
coefficients 1.4435).
-- NaCl: compensation for weak
NaCl-solutions cc to 0 3 Option
eference te er tures 20 and 25 °C 20 and 25 °C
- LTG ( ust with F 100)
Measuring cell: 2-pole measuring cell, 2-pole measuring cell, Ø 12 mm
Ø 12 mm (graphite) (stainless steel: 1.4404, 1.4435) for organic matter (alcohol, petrol, diesel)
with integrated temperature sensor with integrated temperature sensor up to max. 1000 μS/cm
warranty for sensor element: 12 months with glass shaft, unplatinized, NE
W
Display: approx. 11 mm high, 4 -digit LCD-display 1,35 m PUR-cable, fix connected with device
Working conditions Accessories
Device: -25 ... +50 °C, 0 ... 95 % RH (non condensing)
GKL 100 Conductivity control solution
Alarm / Protection
Measuring cell: -5 ... +80 °C (for short-time: 100 °C)

Power supply: 9V-battery, type 6F22 (in scope of supply) (100 ml bottles with 1413 µS/cm. (acc. to DIN EN 27888))
Power consumption: < 1.5 mA GKL 101 Conductivity control solution
Housing: i ct resist nt , e r ne e o r , tr ns rent ne , front si e 5 (250 ml bottles with 84 µS/cm.)
Dimensions (device): 110 x 67 x 30 mm (H x W x D) GKL 102 Conductivity control solution NE
W
Weight: approx. 155 g (100 ml bottles with 50 µS/cm.)
Device functions: GEH 1 Swivel-arm electrode-retainer
Hold function: by keypress the current measuring value will be frozen (for up to 4 electrodes / probes )
Min/max-value memory: the min. and max. measured value is stored GWZ-01 Flow-through chamber
Power-Off-function: device turns off after some time (adjustable: 1-120 min or deacti- (for measuring cell with Ø 12 mm)
vated), if no operating has taken o to l e o e ple e e e to p e
33
Waterproof hand-held
Handmessgeräte
measuring device for pH / Redox

WK
Features
• Waterproof (device and plug connections)
• Serial Interface and analog output
Anzeigen / Regler
• Data logger function

• GLP-features (Good Laboratory Practice)
• Robust and with good grip
• Silicone protection cover
• Big dual display
• Background lightning
• High resolution (0.001pH / 0.1 mV)
Logger / EASYBus
Field of application
• Waters measuring, fishkeeping, aquafarming
• Drinking water monitoring, process control, soil measuring
• Food production and monitoring
W
• Laboratory: Medicine, pharmaceutics, chemistry NE
• Quality management
Messumformer
General function descriptiono-Power-Off Accessories

Min / Max Value Memory: highest and lowest measured value is saved GTF 55 B
Pt1000 temperature immersion sensor for liquids
Auto-Hold: automatic freezing of a constant measuring value 1 m PVC-cable with banana plug
Auto Power Off: device is automatically switched off after a selected period if
unused (0 to 120 min, or deactivated)
Additional Display for pH-Electrode and Battery: Bar graph display
Low Battery Display “BAT” GE 100 BNC (p.r.t. page 37)
pH-electrode
Temperaturfühler
Automatic Temperature Compensation:

GE 117 (p.r.t. page 37)
There is an automatic temperature compensation (ATC) in the range of 0-105 °C
pH-electrode with integrated Pt1000 temperature sensor
for operation mode “pH” and if a temperature probe is connected.
Without connected probe the temperature can be input manually. GAK 1400 (p.r.t. page 37)
Working and calibration set
pH-Calibration:
The used buffer is detected automatically. The temperature dependency of the GMH 55 ES
buffer is automatically compensated. Supplementary set, including ph-electrode (GE 100 BNC), temperature
Permissible electrodes’ data: Asymmetry: ±55 mV / Slope: 45 ... 62 mV/pH probe (GTF55 B), case (GKK 3500) and working and calibration set (GAK
1400)
The condition of pH-Electrode is checked at each calibration.
1-, 2- or 3- point calibration with characteristics bend for GREISINGER-Stan- EBS 20M (p.r.t. page 41)
dard-Buffer, buffer to DIN 19266 or manual buffer input Software for long-term monitoring, recording, etc
Redox-Measurement (ORP): GSOFT 3050 (p.r.t. page 41)

Alarm / Schutz
2 choices: Software for operation of logger devices

“mV” Standard-redox- or mV- measurement USB 5100
"mVH” Conversion to hydrogen systems according to DIN38404 Teil 6 Electrically isolated interface converter with supply of device via USB
rH-Measurement Wasserdichte Elektroden on request
The rH-value is calculated from a measured Redox-value and a manually input incl. waterproof BNC-plug
pH-value. It is also possible to use a pH-value of a previous measurement
instead of manual input.
34
Waterproof hand-held
Handmessgeräte
measuring device for pH / Redox
GMH 5530 without accessories NE
W
GMH 5550 with analog output and data logger, without accessories
Technical data
Measuring ranges:
Anzeigen / Regler
pH: -2.000 ... 16.000 pH
Redox /mV: -2000 ... 2000 mV
-1000.0 ... 1000.0 mV
Temperature: -5.0 ... +150.0 °C
23.0 ... 302.0 °F
rH: 0.0 ... 70.0 rH
Accuracy:
pH: ±0.005 pH
Redox / mV: ±0.05 % FS (mV or mVH)
Temperature: ±0.2 °C
rH: ±0.1 rH
Logger / EASYBus
Connections:
pH, Redox: BNC-female connector, compatible to standard BNC-plugs and waterproof
BNC-plugs, additional banana-jack (4 mm) for separate reference electrode
input resistance: 1012 Ohm
Temperature: 2 banana-jacks (4 mm) for temperature probes (Pt1000 or NTC 10K)
Interface / Supply: 4-pole bayonet female connector for serial interface and supply (with accessory USB 5100)
Display: two 4½ - digit seven-segment display (15 mm and 12 mm)
pH-Calibration
Automatically: 1-, 2- or 3- point calibration, GREISINGER-Standard-Buffer or Puffer to DIN19266 (A,C,D,F,G)
Manually: 1-, 2- or 3- point calibration
Protection class: IP65 (Housing and connections)
Dimensions / Weight: 160 x 86 x 37 (incl. protection cover) / 250 g incl. battery and protection cover
Messumformer
Housing: impact resistant ABS housing with pop-up clip
Power supply: 2 x AAA-battery (included in scope of supply) power consumption <1.0 mA
Battery life time: approx. 1000 hours
Functions GMH 5530 GMH 5550

Min / max value memory x x
Hold / auto-hold x x
Auto power off x x
Low battery display “BAT” x x
Display of condition of pH-electrode x x
Background lightning x x
Temperaturfühler
Period selectable (on/off or 5 s ... 2 min)

Automatic temperature compensation x x
Adjustable calibration intervals (GLP) x x
Calibration memory (GLP) - x
Analog output - 0 - 1 V, freely adjustable,
Connection with 4-pole bayonet connector
Resolution 13 bit, accuracy 0.05% at nominal temp.
Data logger - With measuring point input
Recording interval: 1 s … 1 h
Recording period: 416 days at interval 1 h
Value memory: cyclic: 10000 data sets
Alarm / Schutz
singular: 1000 data sets

Real-time clock - x
Min-/max-alarm - Permanent monitoring of alarm boundaries
3 alarm conditions
- off: Alarm function inactive
- on: Alarm report via display, integrated buzzer
and interface
- no Sound: Alarm report only via display and
interface
35
pH-/redox-/temperature measuring devices pH-electrodes
for goods and food, etc.
Handheld instrument
Double display for pH or redox and

WK
temperature
Redox mode allows for automatic conver-
sion to a hydrogen system.
Automatic or manual temperature com-
pensation
Automatic buffer detection
rH-measurements
Evaluation of probe quality
W
Battery and d.c. operation NE
Serial interface, device can be connected
to bus system (up to 5 devices can be
connected to one PC interface)
Device can be used as thermometer, too
types with Chinch-plug
GMH 3530 without accessories GE 101 GE 120
GMH 35 ES additional set Injection Injection
pH-electrode GE100BNC, temperature probe GTF35 (Pt100 -wire), case GKK3500 and GAK1 00
Logger / EASYBus
pH-electrode pH-electrode
Specification: acceptable electrode data: 2 - 11 pH 0 - 1 pH
Measuring ranges: Asymmetry: ±55 mV 0 - 60 °C 0 - 80 °C
Temperature: -100,0 ... +250,0°C Slope: 45...62 mV/pH
Sensor evaluation depending on calibration re- > 200 µS/cm > 200 µS/cm
or -148,0 ... +482,0°F
pH: 0,00 ... 14,00 pH sults (10 to 100%), displayed by pressing a key. not res resist nt not res resist nt
Redox (ORP): -1999 ... +2000 mV. Opt. 2- or 3-point-calibration with bend of the c e c e
for hydrogen system (DIN38404): characteristics for GREISINGER-standard-buffer
(pH4.01, pH7.00, pH10.01), buffers acc. to 3 o ,
-1792 ... +2207 mVH (at 25°C) refillable
rH: 0,0 ... 70,0 rH DIN19266 (A,C,D,F,G) or manual buffer entry.
Accuracy: (device) ±1 digit at nominal temperature = 25°C Redox-Measurements(ORP): without thre inc nife it
Temperature: ±0,2°C (-20...+80°C), you have 2 choices: to e
otherwise ±0.4°C mV standard-redox- or mV-measurement
pH: ±0,01 pH mVH Temp. compensated conversion to
hydrogen system acc. to DIN38404 part 6, table
* *
Redox (ORP): ±0,1% FS (mV or mVH) oo o e oo
Transmitter
rH: ±0,1rH 1 based on the standard redox electrode (e.g. pe o me t ee

Sensor connections: GE105 with Ag/AgCl system and 3mol KCl) o e et
Temperature: 4-pin screened Mini-DIN-socket. used. et
for Pt100 4-wire (2-wire possible) rH-measurement: Calculation of the rH value
pH, Redox: BNC-socket by means of a redox measuring and by manu-
Input resistance: (pH, Redox) 1012 Ohm ally entering the pH-value. The
pH-value can also be taken from a previous pH types with BNCplug
Display: 2 four digit LCDs
(12.4 mm or 7 mm high) measurement.
Working temperature: 0 to +50°C Temperature measurements: Display of current
value 12.4 mm high for thermometer mode.
Min-/Max- or Hold values can be displayed in the
Interface: serial interface, direct connection to RS232
Temperature probe
or USB interface of a PC via electrically isolated interface

converter GRS3100 or GRS3105 resp. USB3100 (p.r.t.
second 7 mm high display.
* suit
G H
e for G
0 M
00 ,G H0 ,
accessories). Accessories:
Power supply: 9V-battery, type IEC 6F22 (in- GTF 35 € 32,30 Cable extension
cluded) as well as additional d.c. connector (internal temperature probe, Pt100 4-wire (p.r.t. page 101)
pin Ø 1.9mm) for external 10.5-12V direct voltage (available cable length 1, , 5 und 10 m)
supply. (suitable power supply: GNG10/3000)
GE 100 BNC € 57,10
Standard-electrode, BNC-plug
Power consumption: approx. 3 mA
GE 109 € 103,70
Housing dimensions (device): 142 x 71 x 26 pH electrode with integr. Pt100, without thread, BNC- Accessories, etc.:
mm (H x W x D), Impact-resistant ABS plastic plug and MiniDIN-plug (suitable for GMH3530)
housing, membrane keyboard. Front side IP65, in- VD120
GNG 10/3000 € 19,80 injection aid for injection electrode GE101
tegrated pop-up clip for table top or suspended use. plug-in power supply (recommend for logger application!)
Weight: approx. 165 g GKK 3000 € 13,60 GAD 1 CINCH
Alarm / Protection
Functions: case with cut-outs for GMH3xxx Adapter for the plug-in of electrodes with Cinch-
Min/Max-value memory, Hold function, Auto- USB 3100 € 44,40 plugs to devices with BNC-sockets
Off-Function, Low battery warning interface converter to USB, electrically isolated
Automatic temperature compensation: Au-
GAD 1 BNC
EBS 20M € 56,90 Adapter for the plug-in of electrodes with BNC-
tomatic temp. comp. (ATC) if temperature probe software for transmission, recording and archiving
is plugged in and operating mode is pH . plugs to devices with Cinch-sockets.
measuring values obtained from 1 GMH3xxx (p.r.t. p. 41)
Temperatur compensation ragen: 0 - 105°C.
miscellaneous accessories (case,
GPF 100
Manual temperature input if no probe connected. Plastic bottle with wide neck, 100ml
pH-calibration: automatic buffer detection. Auto- mains adaptors, etc.) p.r.t. p. 1 - 3
miscellaneous accessories
matic compensation of temperature dependance p.r.t. p. 37
of buffers.
36
pH-electrodes, redox electrodes and accessories
Handheld instrument
W
NE
types with Cinch-plug types with BNC-plug

GE 014 GE 100 GE 105 GE 106 GE 108 GE 151 GE 109 GE 117
Low cost Standard Redox- ph-electrode Standard Glass pH-electrode pH-electrode
pH-electrode pH-electrode electrode for VE-waters pH-electrode, pH-electrode with integrated with integrated
Logger / EASYBus
(incl. GRP 100) pres. resistant Pt100-sensor Pt1000-sensor
2 - 12 pH 0 - 1 pH 2000 mV 2 - 11 pH 0 - 1 pH 0 - 1 pH 0 - 1 pH 0 - 1 pH
0 - 60 °C 0 - 80 °C 0 - 80 °C 10 - 80 °C 0 - 80 °C -5 - 80 °C 0 - 80 °C 0 - 80 °C
> 200 µS/cm > 200 µS/cm > 25 µS/cm > 25 µS/cm > 200 µS/cm > 200 µS/cm > 200 µS/cm > 200 µS/cm
not res resist nt not res resist nt not res resist nt not res resist nt res resist nt r not res resist nt res resist nt r res resist nt r
c e c e c e c e c e c e c e c e
3 o , 3 o , 3 o , 3 o , Ge e ectro te, 3 o , Ge e ectro te, Ge e ectro te,
refillable refillable refillable refillable not refillable refillable not refillable not refillable
without thre without thre without thre without thre t e without thre without thre t e
Mini u nn u
* * * * * *** **
e o me t l e o me t l m lo o me e o me ele t opl t e o me e o me
l l o e te t l l p tl o p t t l l t l l
Transmitter
mm pool mm pool em l l discus-fishes mm pool e mm pool mm pool
m te m te e e et et m te l l e t t m te m te
t e tme t et t e tme t et t e tme t et t e tme t et t e tme t et
types with BNC plug (suitable for GMH3530, GPHU014MP/BNC or 3rd-party-devices)
* suit e for G 00 , G H0 , G H 0 M
** suit e for G H 0 M
Temperature probe
*** suit e for GMH3530 suit e for G 00 , G M 000 M
Cable extension for pH-electrode GWA1Z thread adapter PG13.5 to G1 , plastics

(available cable length 1, , 5 and 10 m) PG 13.5 u on thre ter for ressure ess use, for n e ectro e
Special disign types (electrodes with thread, other length, special applications etc.) upon request
Note: elektrodes are consumption objects. Lifetime under careful treatment: > 2 Years / Warranty: 12 Month
Accessories, etc.:
GAK 1 00 Working and calibration set cons. of GAD 1 CINCH Adapter for the plug-in of electrodes
5 buffer caps. each ( GPH4,0, GPH7,0 und GPH10,0), 3 x GPF100, with Cinch-plugs to devices with BNC-sockets.
1 x 3 mol KCl-electrolyte KCL3M and 1 x Pepsin-cleaning agent GRL100. GAD 1 BNC Adapter for the plug-in of electrodes
Alarm / Protection
GPH ,0 / 5 Buffer capsule (5 pcs.), pH4.0 with BNC-plugs to devices with Cinch-sockets.
GPH ,0 / 10 Buffer capsule (10 pcs.), pH4.0 KCL 3 M 3 mol KCl-electrolyte for refilling and
GPH 7,0 / 5 Buffer capsule (5 pcs.), pH7.0 storage (fill into protective cap) of electrodes with 3 mol KCI electrolyte,
injection bottle, 100 ml
GPH 7,0 / 10 Buffer capsule (10 pcs.), pH7.0
GPH 10,0 / 5 Buffer capsule (5 pcs.), pH10.0 CaCl 1000 ml NE
W
solution for measuring the pH-value of soil
GPH 10,0 / 10 Buffer capsule (10 pcs.), pH10.0 GRL 100 Pepsin-cleaning agent, 100ml
GPH 12,0 / 5 Buffer capsule (5 pcs.), pH12.0 GRP 100 Redox testing solution (220mV at 25°C), 100ml
GPH 12,0 / 10 Buffer capsule (10 pcs.), pH12.0 miscellaneous accessories
All buffer salts are directly traceable to NIST standards and certified to p.r.t. p. 36
0.0 p units at 5 .
37
automatic temperature compensation
WK WK WK
Handheld instrument
DIGITAL-pH-METER DIGITAL-pH-/mV-/Thermometer DIGITAL-Oxygen Meter

for dissolved oxygen in li uids
GPH 014 GPRT 1400 AN GOX 20

Device ready for use incl. pH-electrode Device ready for use incl. pH-electrode Device ready for use incl. oxygen
type GE 014 and battery. (no buffer GE100 buffer capsules pH4 and pH probe and battery.
Logger / EASYBus
solutions) two 100ml-plastic bottles as well as

temperature probe. Specification:
Specification: Battery/mains operation, analog output: Measuring range:
Measuring range (device): 0.00 up to 14.00 pH 1mV/digit ATC Automatic Temperature- Temperature: 0.0 ... 40.0 °C
Resolution: 0.01 pH Compensation. Oxygen: 0.0 ... 20.0 mg/l O2
Accuracy (device) at nominal temperature = 25°C: Resolution:
+/-0.02 pH +/- 1 digit
Specification: Temperature: 0.1 °C
Input resistance: 1012 Ohm Mesuring range: Oxygen: 0.1 mg/l O2
Position 1 (pH): 0,00 ... 14,00 pH Accuracy: (at nominal temperature = 25°C) ±1digit
pH-electrode: combined measuring and refer-
ence electrode type GE 014 with refillable 3 Position 2 (°C): -20,0 ... +110,0 °C Temperature: ±0.3°C (range 0-30°C)
mol-KCl electrolyte, 2-12 pH, 0 to 60° C Position 3 (mV): -1999 ... +1999 mV
Oxygen: ±2% of m.v. ±0.2 mg/l
Calibration: 3 turning knobs for: Resolution: 0,01pH, 0.1°C or 1mV
Electrode: active diaphragm type.
- temperature compensation 0 to 90° C Accuracy (device): (at nominal temperature = 25°C)
Electrode-Ø front: approx. 12mm, length: approx.
- pH7 value (pH): ± 0,02 pH ± 1 digit
170mm, connecting cable approx. 2m perma-
- pH x-value (eg 4.0/10.0/12.0) (°C): ± 0,5 °C ± 1 digit (range: -10 to 110°C)
nently connected to device.
(mV): ± 0,2 % of m.v. ± 1 digit
Transmitter
Working temperature: 0 to 45 °C Response time: 95% in 10sec.,

Display: 3½-digit LCD display, 13mm high Input resistance: 1012 Ohm depending on temperature.
pH-electrode: combined measuring and reference Operation life: approx. 3 years or more
Power supply: 9V battery type JEC 6F22 (incl.)
electrode type GE 100 with refillable 3 mol-KCl
Low battery warning: automatic; BAT dis- dependant on maintenance
electrolyte 0-14pH, 0-80°C
played in case of low voltage ttention! he p -electrode does not allow for Operation pressure: max. 3 bar
Battery service life: approx. 200 operating h redo -measurements! - Please order redo elec- Temperature compensation: automatically via
Dimensions: approx. 106 x 67 x 30 mm (H x W x trode 105 separately, if re uired (p.r.t. p. 5) temperature sensor integrated in electrode
D). Impact resistant ABS housing. Temperature probe: silicon temperature probe, Calibration: simple quick-calibration in atmospheric air
Weight: approx. 200 g (incl. battery and electrode) electr. insulated in V4A-pipe, 6mm Ø, approx. Display: 3½-digit LCD display, 13mm high
100mm length, approx. 1m silicone cable with Working temperature: 0 to 50 °C
3.5mm Ø jack connector for connection to front-
GAK 1400 side socket.
Relative humidity: 0 to 95 %RH (non condensing)
Temperature probe
Working and calibration set: Storage temperature: -5 to 70 °C

nstrument is calibrated to included probe. f probe
is replaced a new calibration is necessary. Power supply: 9V-battery type IEC 6F22 (inlcuded).
Working and calibration set consisting of 5 buffer
capsules each GPH4.0, GPH .0 and GPH10.0, Calibration: 3 turning knobs for Power consumption: max. 1 mA
3 x 100ml-plastic bottle GP 100, 1 x 3 mol KCL- - temperature compensation 0-90°C Low battery warning: automatic; BAT dis-
electrolyte KCL3M and 1 x Pepsin-cleaning agent (automatically when probe is plugged in) played in case of low voltage
GRL100. - ph7-value Dimensions: 106 x 67 x 30 mm,
GAK1400 is required if no buffer solutions are - pHX-value (eg. 4.0, 10.0, 12.0) impact resistant ABS plastic housing
existing at your works. Working temperature: 0 to 45 °C Weight: approx. 250 g (ready for use)
Display: 3½-digit LCD display, 13mm high Scope of supply: device incl. electrode,
Accessories: Analog output: 1mV / digit, connection via 3.5 mm GWOK01 and KOH electrolyte
GE 014 Spare electrode Ø jack connector. (suitable jack connector included)
Power supply: 9V-battery type IEC 6F22 (incl.). Accessories:
GPH 014 GL Loose device
(without accessories) Additional power supply connector socket 2,5mm Ø. GAS 3 00 Working set
Low battery warning: automatic; BAT dis- (consisting of 3 spare diaphragm heads
GE 100 Better electrode
Alarm / Protection
played in case of low voltage. and 100ml KOH-electrolyte)

0-14pH, 0-80°C
Battery service life: approx. 100 operating h GWOK 01
GE 101 Injection electrode Spare diaphragm head
2-11pH, 0-60°C Dimensions: approx. 150 x 86 x 30 mm (HxWxD).
Impact resistant ABS housing with integrated KOH 100
GE 10 pH-electrode for pop-up clip for table top or suspended use, elec-
low-ion water (as of 25 µS/cm) Spare electrolyte KOH
trode clipped on at the side
GKK 252 Case Weight: approx. 330 g (ready for use)
GKK 252 case
(235 x 185 x 48 mm) with foam lining (235 x 185 x 48 mm) with foam lining
Accessories: GKK 1100 case
GKK 1100 Case
(340 x 275 x 83 mm) with foam lining GPRT 1400 AN GL loose device (340 x 275 x 83 mm) with foam lining
GB 9 V Spare battery GT 1400 B spare temperature probe GB 9 V Spare battery
for add. accessories p.r.t. p. 3 42 - 43 for add. accessories p.r.t. p. 3 42 - 43 for add. accessories p.r.t. p. 42 - 43
3
oxygen measuring devices for dissolved oxygen in liquids
Handheld instrument
Double display for oxygen and temperature
Meas. units: O2-concentration, O2-saturation and O2-partial pressure (GMH3630 only)
Automatic air pressure compensation by means of integrated pressure
sensor
Salinity correction
Extremely small measuring probe (dimensions as for pH-probe)
Min./Max. value memory, Hold function,
Serial interface, device can be connected to bus system (up to 5 devices
can be connected to one PC interface)
Simple calibration in atmospheric air
GMH 3610 incl. oxygen electrode Difference between GMH3630 and GMH3610:
Additional features of GMH3630:
GMH 3630
Logger / EASYBus
incl. oxygen electrode Measuring of air pressure by means of integrated pressure sensor
Extended measuring range for O

Specification : 2
O -partial pressure measurement
2
Measuring ranges:
Correction of salinity
O2-concentration: GMH3610: 0,0 ... 25,0 mg/l
GMH3630: 0,0 ... 70,0 mg/l or Housing dimensions: 142 x 71 x 26 mm (H x W x D), impact-resistant
0,00 ... 25,00 mg/l ABS plastic housing, membrane keyboard, transparent panel.
O2-saturation: GMH3610: 0 ... 300 % Front side IP65, integrated pop-up clip for table top or suspended use.
GMH3630: 0 ... 600 % or 0,0 ... 250,0 % Weight: approx. 300 g (complete with battery and probe)
O2-partial pres.: GMH3630: 0 ... 1200 hPa or 0,0 ... 570,0 hPa Temperature compensation: automatic via temperature sensor
(0,0 ... 427,5 mmHg or 0 ... 900 mmHg) integrated in electrode.
Temperature: 0,0 ... 50,0 °C Air pressure compensation:
Pressure: GMH3630 500 ... 1100 hPa abs. GMH3610: enter current air pressure by means of keys
Accuracy: (at nominal temperature = 25°C)
Transmitter
GMH3630: automatic via integrated pressure sensor. Display of
Oxygen: GMH3610: ±1,5% of m.v. ±0.2 mg/l current air pressure.
GMH3630: ±1,5% of m.v. ±0.2 mg/l (0...25mg/l) or Correction of salinity (GMH3630): automatic
±2,5% of m.v. ±0.3 mg/l (25...70mg/l) Salinity value can be set via keyboard from 0,0 ... 70,0
Temperature: ±0,1°C ±1digit
Calibration: 1-point calibration: extremely simple quick calibration
Pressure: ±0,5% FS ±1digit in atmospheric air.
Sensor connection: 6-pin screened Mini-DIN-socket. 2-point calibration (GMH3630 only): first point at atmospheric air,
Electrode: active membrane type. Electrode-Ø front: approx. 12mm, second point at upper measuring range (with calibration set GKS3600).
overall length: approx. 220 mm, anti buckling glanding, neck col- Scope of supply: device incl. electrode, GWOK01 and KOH electrolyte
lar: Ø approx. 20 mm, 4m connection cable with Mini-DIN-plug.
Response time: 95% in 10sec., depending on temperature. Upcharges, accessories:
Temperature probe
Operation life: approx. 3 years or more, depending on maintenance

Working temperature: 0 to +40°C GWO 3600 Spare electrode with 4 m cable
Working pressure: max. 3 bar Upcharge for electrode with 10 m cable
Flow rate: min. 30 cm/sec. Upcharge for electrode with 30 m cable
Display: 2 four digit LCDs (12.4mm and 7mm high) for oxygen, tem-
perature or pressure, as well as additional functional arrows. GSKA 3600 protection cap for depth measuring
Pushbuttons: 6 membrane keys BA 10 Baby Flow apparatus for 12mm electrodes
Working temperature: 0 to +50°C Provides sufficient flow for the electrode permanently, therefore the mini-
mum flow is ensured (e.g. for measurings in large depths).
Storage temperature: -20 to +70°C (Electrode: 0 to 60°C) GKS 3600 calibration set
(consisting of calibration device, 100 ml calibration solution, 10 ml
Interface: serial interface, direct connection to RS232 or USB in-
catalytic solution, measuring pipette and measuring bottle)
terface of a PC via electrically isolated interface converter GRS3100
Alarm / Protection
or GRS3105 resp. USB3100 (p.r.t. accessories). GKN 3600 calibration refill set
(consisting of 100ml calibration solution, 10ml catalytic solution, meas. pipette)
Min-/Max-value memory: max. and min.values will be memorized.
Hold function: by pressing a button the current meas. value will GAS 3600 working set
be memorized. (consisting of 3 spare diaphragm heads and 100ml KOH-electrolyte)
Power supply: 9V-battery, type IEC 6F22 (included) as well as GWOK 01 spare diaphragm head per piece
additional d.c. connector for external 10.5-12V direct voltage supply. KOH 100 spare electrolyte KOH 100 ml-bottle
(suitable power pack: GNG10/3000)
Power consumption: approx. 3 mA ST-R1 device protection bag with cut out for sensor connection
punch: 1 round hole, suitable for: GMH3610, GMH3630, GMH3691... (p.r.t. page 42).
Auto-Off-Function: 1...120min (can also be deaktivated).
Low battery warning: and bAt for add. spare parts and accessories p.r.t. pages 1 - 3
39
Measuring devices for volumetric flow
Phonometer
Handheld instrument
and flow speed

Volumetric flow anemometer Thermal anemometer Phonometer

GVA 0430 TA 410 GSH 8922
cpl. in case, incl. RS232 interface cable incl. case and calibration certificate with analog output, backlight display
and software cpl. in case
high precision
flow rate measures even small air flows
volumetric flow General:
rigid thin telescopic probe ( 7mm)
Logger / EASYBus
Compensation of the background-noise for

temperature tom t tempe t e ompe t o measuring sound-sources in the fore-ground.
Application: simple 2 keys operation Weightig of the sound level via two weight-
Ventilation and air conditioning technology, ing-filters according to the IEC standard.
meteorology, water sport, air gliding etc. General: Assignation of the max/min value during one
The TA410 proves that quality does not measuring period.
Specification: necessarily has to be expensive. Precise
measuring of the important measurands air Specification:
Meas. ranges:
velocity and air temperature in ventilation and Measuring ranges: 30 - 130 dB (6 ranges)
Flow rate: 0,40 m/s to 30,00 m/s
air conditioning systems isn t a question of 30 - 80, 40 - 90, 50 - 100,
Temperature: -10,0 ... +50,0°C
the prize anymore. 60 - 110, 70 - 120, 80 - 130 dB
Resolution: 0,01 m/s resp. 0,1 °C manual or automatic selection of range
Its prize and precision makes this instrument
Accuracy: (at nominal temperature = 25°C) Resolution: 0,1 dB
interesting for any measuring specialist.
Flow rate: ±2 % FS Accuracy: ±1,5 dB
Transmitter
Temperature: ±0,6 °C Norms: ANSI S1.4 and IEC 651 Typ 2

Meas. probes: vane probe, 70mm Specification: Frequency rate weighted: 31,5 Hz - 8 kHz
rotor-Ø and precision-NTC Evaluation weight filter:2, selectable
Meas. ranges:
Meas. interval: 1 meas. / sec. Type A: evaluation of the spectrum in accordance
Flow rate: 0,00 m/s ... 20,00 m/s
Display: 2-line LCD display, 37 x 42 mmm Temperature: -10,0 ... +60,0°C with the perceptive faculties of the human ear.
Working temperature:-10 to +50°C oun inso tion est ish ent, en iron ent n sis
Resolution:
Relative humidity: 0 to +95%r.h. Type C: linear evaluation of spectrum
Flow rate: 0,01 m/s (sonic-analysis of engines or machines)
(non-condensing)
Temperature: 0,1 °C
Storage temperature: -10 to +50° C Weight of time factor: fast or slow
Accuracy: (at nominal temperature = 25°C) Microphone: 6mm Electret condensator mic.
Interface: serial interface RS232
Temperature probe
Flow rate: ±3 % of m.v. (typ.)

Special function: averaging of 8 meas. Display: 3 -digit LCD-backlight display,
or ±0,025 m/s additionally quasi-analog bar graph
points, averaging throughout meas. time,
Temperature: ±0,3 °C ±1 digit Analog output: AC: 0.707 Vrms,
volumetric flow calculation, hold function,
Display: LCD-display DC: 10mV DC / dB
min./max. value memory
Power supply: 9V-batteries, type IEC 6F22 Power supply: 4 pcs. 1.5V AA batteries Working temperature: 4 to +50°C
(included) Relative humidity: 10 to +90 % RH
(included) or via external power supply
Operating time: 100 hours (with alkaline) Operating time: 15 operating hours Storage temperature: -20 to +60° C
(with alkaline batteries) Interface: RS232, (2400BD8N1)
Low battery warning: display blinking
Ambient temperature: Power supply: 9V-batteries, type IEC 6F22
Automatic-Off-function: device switches
off automatically after 20 minutes. Perma- - electronic: 5 ... 45 °C (included) or via external 9V power supply
nent mode possible. - telescopic probe: -10 ... +60 °C Operating time: 20 hours (with alkaline)
Alarm / Protection
Housing dimensions: : Dimensions: Housing: 256 x 80 x 38 mm (H x W x D)

device: 183 x 76 x 45 mm (W x H x D), - device: 183 x 87 x 44 mm (W x H x D) Weight: approx. 240g (meas. device)
probe: 155 x 75 x 42 mm (W x H x D), - telescopic probe: tip-dia 7 mm, end-dia 13 mm,
Weight: length: 245 mm ... 1053 mm, Accessories:
approx. 350g (meas. device and probe) cable length: 1m GNG 8922 power supply
approx. 1.05kg (cpl. in case) Weight: approx. 270g (device and probe) T-Logg 120 K / 0-2V € 99,90
for mains-independent long-term recording
system (p.r.t. page 62)
Accessories:
GNG 8901 power supply
0
Hand-held instruments - software
Handheld instrument
Operation for GMH 3xxx - logger device Long-time monitoring - Recording - Monitoring
W
NE
GSOFT 3050 EBS 20M
Windows-software for the setting, data read-out and printing of all data (20-Channel Measurement Data Logging)
stored by devices of the GMH3xxx-series with logger function.
General advice: EBS 60M
With GSOFT3050 you are able to operate the logger function of the (60-Channel Measurement Data Logging)
GMH3000-hand-held series. The logger recordings can be started, This software makes up a low-price and comfortable multi-
stopped, read in and displayed. It is also possible to operate several
channel acquisition program for measuring data. The program is
Logger / EASYBus
instruments simultaneously and to display their data in mutual diagrams.
suitable for recording, monitoring, visualization and documenta-
Data will be read via the serial interfaces ‘COM 1‘ - 'COM 255' of your PC
and an interface adapter (GRS3100, GRS3105 or USB3100). Field of application:
Software is multilingual, the language can be selected simply in the pro- On-site recording
gramme. Executable with Windows 98, Me, NT, 2000, XP, Vista and 7. Process and system control, monitoring of climate and buildings
The GSOFT3050 offers, among others, the following functions: Real time monitoring of measuring data
Display of the GMH-information i.e for data evaluation and logging for cost listings, overview of
Setting of the alarm function for GMH3xxx devices. consumption, optimisation of processes, and other statistics
Operation of the logger function
simple selection of the logger function (cyclic or manual), setting of
Highlight:
cycle time, logger recording start and stop, read-out of logger data. Simultaneous use of several serial interfaces
Diagram display of logger data Simultaneous use of different serial converters
The logger data can be displayed in form of a diagram. Quick and easy installation
It is possible to display various measuring sequences in one diagram. Freely scaleable diagrams and alarm limits
Transmitter
The diagram offers the following functions: Visualization of actual measurements values
- display including real-time axis, zooming of display view
- display of legend can be switched on/off
Trusted data storage via SQL database
- marking of measuring points can be switched on/off Data export
- a new/existing measuring sequence can be added/deleted at any time
Moduls:
Logger data print-out Large-digit display
Data can be printed as tables (complete measuring sequence or limited
area) or as diagram (in accordance with the current diagram window). Diagram display
Memori ing of logger data Table display
The logger data can be saved in files and, therefore, called up again at Visualization of alarm limits
any given time without a connected device. Visualization of all recorded datas in one diagram
Temperature probe
Export of logger data to ASCII (text) file format

Measuring Cycle:
Memori ing of windows depending on the number of channels: 500ms to 10s
Data and diagram windows can be placed at any desired. The setup of
the windows can be stored as 'view'. System Requirements:
Windows XP, Windows Vista, Windows 7
GMH 3000.DLL Simultaneous use of different serial Bus-Systems:
Windows-functional library for interface communication.
To integrate all GMH 3xxx device functions in own Windows programms, EASYBus, GMH handheld devices, GDUSB 1000
i.e. LabView.
It doesn't matter if you want to create analog measurements or digital con-

ProfiLab-Expert 4.0 trols - you can realize it all. And for all this you don't have to write a single
The software ProfiLab-Expert allows you to develop your own digital or program-line!
Alarm / Protection
analog measuring technology requirement. ProfiLab-Expert supports our devices of the GMH3xxx-Serie with serial
interface, GCO100, GFTB100/GRS, as well as all EASYBus-devices. Every
device will be displayed in your project like a normal component. You only
have to connect his inputs and outputs.
ompiler inclusive !
ProfiLab-Expert is equipped with an integrated compiler. The compiler can
create executable files for stand-alone applications that run on systems
without ProfiLab-Expert.
The distribution of these compiled applications is unlimited, so ProfiLab-
Expert become a complete and professional developers system.
Software executable with: Windows 98, Me, NT, 2000 and XP.
1
Handheld instruments - Accessories
Handheld instrument
Device case:
GKK 3000 with unche inin for e ice of the GMH 3 series (275 x 229 x 83 mm)
GKK 3500 with unche inin for e ice of the GMH 3 series (394 x 294 x 106 mm)
Einlage von GKK 3000
GKK 1 20 with unche inin for e ices of the GMH 3 series (450 x 360 x 123 mm)
Einlage von GKK 3500

GKK 1 20
Universal case:
GKK 252 with foam lining for universal use (235 x 185 x 48 mm)

Logger / EASYBus
NE
W GKK 3700 with foam lining for universal use (450 x 360 x 123 mm)
Protection bag:
ST-R1 Nappa leathern device protection bag

with 1 round cut-out for sensor connection
suitable for: GMH 3111, GMH 3151, GMH 3161-12, GMH 3181-12,
GMH 3410, GMH 3430, GMH 3610, GMH 3630, GMH 3691, GMH 3710,
GMH 3750, GMH 175
ST-R2 Nappa leathern device protection bag
with 2 round cut-outs for sensor connection
suitable for: GMH 3156, GMH 3161-01, GMH 3161-07, GMH 3161-13,
Transmitter
GMH 3181-01, GMH 3181-07, GMH 3181-13, GMH 3510, GMH 3530
ST-N1 Nappa leathern device protection bag
with 1 rectangular cut-out for sensor connection
suitable for: GMH 3210, GMH 1150, GMH 1170
ST-N2 Nappa leathern device protection bag
with 2 rectangular cut-outs for sensor connection
suitable for: GMH 3230, GMH 3250
ST-RN Nappa leathern device protection bag
with 2 round cut-outs for sensor connection
suitable for: GMH 3330, GMH 3350, GMH 3830, GMH 3850
Temperature probe
ST-KO device protection bag

suitable for: GTD 1100, GPB 2300, GPB 3300
ST-KN device protection bag with rectangular cut-out for sensor connection
suitable for: GTH 1150, GTH 1170
ST-KR device protection bag with round cut-out (central)
suitable for: GTH 175, GOX 20, GOX 100, GLF 100, GLF 100 RW
ST-KF device protection bag with punched-out slot for a sensor head
suitable for: GFTH 95, GFTH 200, GFTB 100
ST-KD device protection bag with 2 round cut-outs
suitable for: GDH 200 - 07, GDH 200 - 13, GDH 200 - 14, GMR 100
Alarm / Protection
Mount:
GEH 1 Electrode retainer for measuring electrodes and probes

suitable for our electrodes (pH/redox, conductivity, oxygen, ...)
and temperature probes with plastic handle
GMH 1300 Magnetic mount for hanging up devices with integrated suspension clip
GMH 1300 with

mounted device
2
Handheld instruments - Accessories
Handheld instrument
Interface:
USB 3100 Interface converter GMH 3xxx <=> PC,
for electrically isolated connection of a GMH 3xxx to the
USB-interface of your PCs.
(Converter supplying from PC interface)
GRS 3100 Interface converter GMH 3xxx <=> PC
for electrically isolated connection of a GMH 3xxx to the RS232-interface
GRS 3105 5-point interface converter GMH 3xxx <=> PC,
connection of 5 GMH 3xxx to the RS232-interface of your PCs.
(Converter supply achieved via permanently connected power supply)
Device delivered with 9-pin DSub extension cable and 5 connection cables VEKA3105
VEKA 3105 Spare connection cable GMH 3xxx <=> GRS 3105
GSA 25S-9B Connection adapter (25-pin Dsub-adapter <=> 9-pin Dsub-socket)
GSA 9S-25B Connection adapter (9-pin Dsub-adapter <=> 25-pin Dsub-socket)
USB-Adapter for connection of a RS232-interface converter to the USB-interface
Plug and Cable

MINIDIN S Mini-DIN plug in, 4-pin, with lock and for self installation
W
NE
Logger / EASYBus
AAG2M 2 m analog output cable, 2x banana plug
Power supply:
GB 9 V Spare battery 9V, type IEC 6F22
GLI 9 V Lithium battery 9V, approx. 1200 mAh
GAK 9 V NiMH accu 9V
GLG 1300 Charger for charging two 9V accus at the same time
GNG 09 Plug-in power supply (220 / 240 V, 50 / 60 Hz),

output voltage: 12 V / 300 mA, suitable for devices with
2.5 mm jack connector
Transmitter
output voltage: 10.5 V / 10 mA, suitable for devices with
2.5 mm jack connector (e.g. for devices of the series GDH ... )
GNG 10 / 3000 Plug-in power supply (220 / 240 V, 50 / 60 Hz),
output voltage: 10.5 V / 10 mA, suitable for devices with
power supply socket (e.g. for devices of the series GMH ...)
GNG 8901 Plug-in power supply (220 / 240V, 50 / 60 Hz),
DC device socket 5.4 / 2.1 (suitable for GVA 0430)
Temperature probe

DC device socket 3.5 / 1.2 (suitable for GSH 8922)
Switching modules:
GAM 3000 Switching module for the GMH3xxx-series
The GAM 3000 is an alarm or control output for the devices of the GMH3xxx-series with alarm output
function. The GAM 3000 is controlled via the serial interface of the GMH3xxx. The setting of the
alarm/switching limits are carried out the GMH3xxx as usual. You can choose between 2 different
switching modes:
- Alarm output: Relay switches when the measuring value is no longer within the min./max. alarm
limit values or an error state occurs at the set channel.
Alarm / Protection
- Control output: In this case the min./max. values are not used as alarm points but as on/off switch-
ing points. In case of an error state the relay switches in its preferred state off .
The desired switching function can be selected via an externally accessible miniature switch.
Power supply: 220 / 240 V, 50 / 60 Hz
t o tp t controlled power socket,
selector switch to choose switching state normally-open or normally-closed
t po e 10 A (ohmic load)
o e to GMH3xxx interface and supply (integrated power supply 10.5V/10mA) via 1 m
cable each, permanently connected to GAM 3000.
Dimensions: (controller) 112 x 71 x 48 mm (H x W x D)
3
P-display with freely adjustable scale and without auxiliary energy for
Handheld instrument
all ... 20 mA 2-wire measuring transducers

Front
24 x 48
Moisture
GIA 0420 Power
pH Fill level
Redox Flow
Oxygen Flow rate
Conductivity Revolutional Speed
Gas
Logger / EASYBus
Temperature Distance In accordance with EN61326 +A1 +A2

for unrestricted use in residential
Pressure and industrial area
GIA 0420 Specification:

Display Input signal: 4 ... 20 mA
Reverse voltage protection:pole-free connection
GIA 0420 SP Voltage load: approx. 3 Volt
Display with additional (electrically isolated switching output Accuracy: ±0.2% FS ±1digit (at nominal temperature = 25°C)
open collector) - can be configurated as MIN-/MAX alarm.
Temperature drift: 100 ppm
Transmitter
Meas. rate: approx. 3 measurements / sec.

GIA 0420 N - ex Filter: 3 stages, can be switched on and off
with EX-protection for all potentially explosive atmospheres
Display: LCD display, approx. 10 mm high
Ex-display available 2nd quarter 2011
Display range: -1999 to 9999
time-saving on-site scaling without any additional Decimal point: any position selectable
auxiliary modules Scaling: scale freely adjustable via 3 keys at the back side of the unit
Limit: LI 0 Values above/below range permissible
simple device identification by means of insertion film. LI 1 Values above/below range not permissible
Temperature probe
optimum operational reliability due to integrated Working temperature: 0 to 50 °C

self-diagnosis function and watchdog system. Storage temperature: -20 to 70 °C
large display range from -1999 to +9999 digits Electric connection: 2-pin screw-type/plug-in terminal
max. terminal range up to 1.5 mm²
high accuracy combined with minimum temperature (for GIA0420SP): 2 x 2-pin screw-type/plug-in terminal
drift due to integrated self-calibration max. terminal range up to 1.5 mm²
Housing: fibre-reinforced Noryl
large LCD display, approx. 10 mm high
Front screen: polycarbonate
smallest housing dimensions possible Dimensions: 24 x 48 mm (front dimensions)
very low voltage load at approx. 3 V Panel cutout: 21.7+0.5 x 45+0.5 mm (H x W)
Alarm / Protection
monitoring of probe damage, probe short-circuit, Mounting depth: approx. 65 mm incl. terminal
values no longer within measuring range. Protection rating: IP54 (IP65 by means of additional optional
silicone O-rings, GGD2 8SET)
software filter for clear display even in case of encoder Switching output: (only for GIA 0420 SP) electrically isolated
signal interference (can be switched on and off) open collector switching output
simple installation by means of pole-free connection Switching capacity: 24 V DC 3 mA
(plus and minus exchangeable)
additional monitoring function (GIA 0420 SP)
Front
Universal LowCost-LED-Display for Front
Handheld instrument
24 x 48 Standard Signals and Temperature 24 x 48
Digital display Digital thermometer
for standard signals for NiCr-Ni, Pt100 or Pt1000
GIA 2448 (for self-adjustment) GTH 2448/1 (NiCr-Ni)

GIA 2448 WE 1) GTH 2448/2 (Pt100, 1°C)
(settings and calibrations by our works)
1) Please specify as follows upon order nput signal, scaling (lower and
GTH 2448/3 (Pt100, 0.1°C)
Logger / EASYBus
upper limits), decimal point and supply voltage.
( rder to read e.g. 44 4- 0m , 4m -50.0, 0m 100.0, 1 D )
GTH 2448/4 (Pt1000, 1°C)
GTH 2448/5 (Pt1000, 0.1°C)
Meas. ranges: 0-20 V, 0-10 V, 0-2 V, 0-1 V, 0-200 mV, 0-20 mA Measuring ranges, Resolution:
and 4-20 mA. (select via soldering jumpers) GTH 2 8/1: - 50 ... +1150 °C (NiCr-Ni)
Display range: -1999 ... +1999 digit GTH 2 8/2: -200 ... + 650 °C (Pt100, 2-wire)
(adjustable via soldering jumpers and potentiometer) GTH 2 8/3: -60,0 ... +199.9 °C (Pt100, 2-wire)
Decimal point: any position by means of soldering jumpers GTH 2 8/ : -200 ... + 650 °C (Pt1000, 2-wire)
(soldering jumpers accessible after removal of front panel) GTH 2 8/5: -60,0 ... +199.9 °C (Pt1000, 2-wire)
Accuracy: ±0.2% ±1 digit (at nominal temperature = 25°C) Accuracy: (at nominal temperature = 25°C)
NiCr-Ni: ±1% ±1 digit (from -20...+550°C and 920...1150°C)
Scan rate: approx. 3 measurements / sec.
±1.5% ±1 digit (from 550... 920°C)
Transmitter
Display: 3 -digit, red 10 mm high LED display Pt100, Pt1000: ±0.5°C ±1 digit or ±1°C ±1 digit
Working temperature: 0 to 50 °C (permissible ambient temperature) Offset compensation: (only for Pt100 and Pt1000)
Relative humidity: 5 to 95 %RH (non-condensing) The zero point offset of the sensor (e.g. due to long
Storage temperature: -20 to 70 °C cables) can be compensated for by means of the
Voltage supply: 8 - 20 V DC or 18 - 29 V DC resp. spindle trimmer on the backside of the device.
8 - 20 V AC or 18 - 29 V AC Display: 3 -digit, red 10 mm high LED display
(set via soldering jumper) Scan rate: approx. 3 measurements / sec.
Current supply: max. 20 mA Working temperature: 0 to 50 °C (permissible ambient temperature)
Housing: glass fibre reinforced Noryl, front panel PC. Relative humidity: 5 to 95 %RH (non-condensing)
Dimensions: 24 x 48 mm (H x W) (front frame) Storage temperature: -20 to 70 °C
Mounting depth: approx. 65 mm (incl. screw-type/plug-in terminal) Voltage supply: 8 - 20 V DC or 18 - 29 V DC resp.
Temperature probe
8 - 20 V AC or 18 - 29 V AC (set via soldering umper)

Panel mounting: with VA-spring clamp.
allowed panel thicknesses from 1 to approx. 10 mm Current supply: max. 20 mA
Housing: glass fibre reinforced Noryl, front panel PC.
Panel cut-out: 21.7+0.5 x 45+0.5 mm (H x W).
Dimensions: 24 x 48 mm (H x W) (front frame)
Connection terminal: 4-pin screw-type/plug-in terminal
Mounting depth: approx. 65 mm (incl. screw-type/plug-in terminal)
for wire cross sections from 0.14 to 1.5 mm
Panel mounting: with VA-spring clamp.
Noise immunity (EMC): meets EN50081-1 and EN50082-2 requirements,
allowed panel thicknesses from 1 to approx. 10 mm
additional fault: <1%
Panel cut-out: 21.7+0.5 x 45+0.5 mm (H x W).
IP rating: front side IP54 (with optional O-rings IP65).
Connection terminal: 4-pin screw-type/plug-in terminal
for wire cross sections from 0.14 bis 1.5 mm
Accessories IP rating: front side IP54 (with optional O-rings IP65).
GGD 2 8 SET optional O-rings for IP65 (2 pieces)
Alarm / Protection
System solution - complete packages:

GNG 220/2-12V power supply for GIA 2448 and
GTH 2448 (Input: 230 VAC ; output: 2 x 12 VDC regulated, 30 mA each) KFZ 2000
Exhaust gas temperature set for measurement of exhaust gas tempera-
GNG 12/2 power supply tures up to 1000 °C in motor vehicles. The Set consists of:
(Input: 12 VDC ; output: 24 VDC electrically isolated)
GTH 2 8/1 NiCr-Ni thermometer
GNG 2 /2 power supply with additional over-voltage protection
(Input: 24 VDC ; output: 24 VDC electrically isolated) GTF 101-5/30150 / NIMONIC temperature probe
with jacket material: Nimonic 75 (view p.r.t. page 109)
for additional accessories, transmitter and probes Cable length = 3 m (extended cable against upcharge available)
p.r.t. pages 56, 57, 80 - 85, 87 - 96, 103 - 117 GKV clamping ring screw connection (p.r.t. p. 116)
5
Universal Display and Regulating Device
Handheld instrument
Front
24 x 48
GIA 20 EB
easy operability - high accuracy - economy-price
Universal inputs for normalized signals, frequency, Pt100,
s
.Bu Pt1000 and thermocouples
.S.Y
E.A Modul
-
2 integrated switching outputs
Configurable as display or controller (5 switching functions)
uick regulating and controlling stage

extensive self-monitoring and diagnostic system
Serial interface (max. 240 devices can be combined)
Limit functions, digital filter, min-/max value memory
Option: Frontpanel with push buttons Alarm delay selectable
(frontpanel without buttons included in delivery)

Logger / EASYBus
Specification
Measuring input: universal input for Voltage supply: 9 to 28 V DC (standard)
- Normali ed signal: 4-20 mA, 0-20 mA, 0-1 V, 0-2 V, 0-10 V, 0-50 mV Option: elec. insulated voltage supply 11-14V or 22-27V
- Resistance thermometer: Pt100 (3-wire), Pt1000 (2-wire) Power consumption: max. 30 mA (without outputs)
- Thermocouples: types J, K, N, S, T Nominal temperature: 25 °C
- Frequency, Rotational speed: TTL-signal, switching contact Operating temperature: -20 to +50 °C
- Counter up / down: TTL-signal, switching contact Relative humidity: 0 to 80 %RH (non condensing)
- Serial interface Storage temperature: -30 to +70 °C
Measuring rate: approx. 100 meas. / sec. (for norm. signal) resp. approx. Housing: glass fibre reinforced Noryl, front panel PC
4 meas. / sec. (for temperature and frequency) Dimensions: 24 x 48 mm (front frame).
Measuring resp. display ranges, resolution: Mounting depth: approx. 65 mm (incl. screw-type/plug-in terminal)
Temperature: (display unit selectable: °C or °F) Panel mounting: with VA-spring clamp.
Pt100: -200 ... +850°C or -50.0 ... +200.0°C Allowed panel thicknesses from 1 to approx. 10 mm.
Pt1000: -200 ... +850°C Panel cut-out: 21.7+0.5 x 45+0.5 mm (H x W)
type : -170 ... +950°C type K: -270 ... +1350°C
Transmitter
Connection terminal: screw-type/plug-in terminal: 2-pin for interface

type N: -270 ... +1300°C type S: -50 ... +1750°C and 9-pin for outher connections.
type T: -270 ... +400°C For wire cross sections from 0.14 to 1.5 mm2.
Norm. signals: -1999 ... 9999 digit, scale freely adjustable IP rating: front side IP54, with optional r-rings IP65
- recommended range: < 2000 digit Noise immunity (EMC): EN61326 (appendix A, class B)
Frequency: 0.000 Hz ... 10 kHz, display freely scaleable
Rotational speed: 0.000 U/min ... 9999 U/min, Options (upon upcharge)
selectable prescaler: 1-1000
- IS12 type with insulated power supply: 11-14V
Counter up/down: countervalue remains on power loss
0 ... 9999 (10 Mio. with prescaler), - IS2 type with insulated power supply: 22-27V
pulse frequency: < 10kHz
selectable prescaler: 1-1000 Special design types
Temperature probe
Serial interface: Displaying and controlling from values coming via

the serial interface. GIA 20 EB / PK
Accuracy: (at nominal temperature = 25°C) Universal display and regulating device with
- Norm. signal: < 0.2 % f.s. ±1digit (at 0-50mV: < 0.3% f.s. ±1digit)
- Resistance thermometer: < 0.5 % f.s. ±1digit
individual programmable lineari ation characteristic
- Thermocouples: < 0.3 % f.s. ±1digit (at type S: < 0.5% f.s. ±1digit) Even heavily bent sensor characteristics/value curves can be approxi-
Point of comparison: ± 1 °C mated by a straightened curve with 30 freely programmable linearization
- Frequency, rotational speed, counter: < 0.1 % f.s. ±1digit points.
Outputs: 2 switching outputs, not electrically isolated The adjustment to the measurement is done via the integrated interface with
Switching behavior: Low-Side, High-Side or Push-Pull (selectable) the (gratis) configuration software. Therefore only the input values (in mA, V,
Connection data: Low-Side: 28V/1A; High-Side: Ub/200mA Ω or Hz) and the corresponding displayed values have to be entered.
Controller state: 2-point, 3-point, 2-point with alarm, For detailed information please refer to our homepage www.greisinger.de
min/max alarm to 1 output, min/max alarm to 2 outputs
Accessories
Alarm / Protection
Swirching point, hysteresis: freely adjustable

Response time: < 20 msec. at normalized signals GGD2 8SET O-rings for device mountig IP65 (2 pieces)
< 0.3 sec. at temperature and frequency
FS3T Frontpanel with 3 push-buttons
Display: approx. 10 mm high, 4-digit red LED-display For comfortable configuration, for adjustments at variable switching points,
Service: with 3 push-buttons (after disassembly of the frontpanel). calling of min- and max-values etc.
Option: FS3T, frontpanel with 3 push-buttons for comfortable configuration.
rouble-free replacement is possible (refer accessories)
GNR10 ower su n re o u e for one G 0 rt e 55
(Input: 230VAC, Power supply for device + transducer, 2 relay outputs)
Min-/max-value memory: the max- and min value will be stored.
Interface: serial interface, elect. isolated, EASYBus compatible Temperature probes p.r.t. page 103 - 117
Miscellaneous: permanent self-monitoring, digital filter function, Transducer p.r.t. page 80 - 102
measuring range boundary (limit) for other accessories p.r.t. page 56/57, 78/79
6
The Displaying and Regulating Device for 230 V
Handheld instrument
Front
24 x 48 GIR 230 ... 5 input executions for choice:

- normalized signal: 4-20mA, 0-20mA, 0-10V
- resistor: Pt100 (3-wire), Pt1000 (2-wire)
- thermo couple: type J, K, N, S, T and 0-50mV
- frequence
- NTC
2 relay outputs and 1 switching output NPN (GIR 230 NTC: 1 relay output)
configurable as display or controller (5 switching functions)
min/max value memory, limit functions, digital filter
GIR 230 NS (normalized signal input) GIR 230 Pt1000 / DIF

Controller with meas. input for normalized signal (4-20 mA, 0-20 mA, 0-10 V) Difference controller with 2 measuring inputs for Pt1000
GIR 230 Pt (resistance input) GIR 230 NTC / DIF
Controller with measuring input for Pt100 and Pt1000 Difference controller with 2 measuring inputs for NTC
GIR 230 TC (thermo couple input) GIR 230 NS / DIF - ...
Logger / EASYBus
Controller with meas. input for thermo couple and 0-50 mV Difference controller with 2 measuring inputs for 4-20 mA, 0-20 mA or 0-10 V
GIR 230 FR (frequence input) Version
Controller with measuring input for frequency GIR 230 Pt1000 / DIF, GIR 230 NTC / DIF:
Measuring inputs: 2 x Pt1000 (2-wire) resp. 2 x NTC
GIR 230 NTC Meas. ranges, resolution: t : -200 ... +850°C, 1°C
NTC: -40.0 ... +120.0°C, 0.1°C
Controller with measuring input for NTC and only 1 relay output Display: difference temperature sensor1 - sensor2
Accuracy: < 0.5 % f.s. ±1digit (at nominal temperature = 25°C)
Version Measuring rate: approx. 4 measurings / sec.
GIR 230 NS:
GIR 230 NS / DIF - 20mA, ... - 020mA, ... - 010V:
Measuring input: 4-20mA, 0-20mA, 0-10V
Measuring inputs: (2 x) 4-20 mA, (2 x) 0-20 mA or (2 x) 0-10 V
Display range: -1999 ... 9999 digit, scale freely adjustable
specify re uired input signals by order!
recommended range: < 2000 digit
Display range: -1999 ... 9999 digit, scale freely adjustable
Accuracy: < 0.2 % f.s. ±1 digit (at nominal temperature = 25°C)
recommended range: < 2000 digit
Transmitter
Measuring rate: approx. 100 measurings / sec.
Accuracy: < 0.2 % f.s. ±1 digit (at nominal temperature = 25°C)
GIR 230 Pt: Measuring rate: approx. 100 measurings / sec.
Measuring input: Pt100 (3-wire), Pt1000 (2-wire)
Measuring ranges, resolution: General Specifications
Pt100: -200 ... +850°C resp. -50.0 ... +200.0°C Outputs:
Pt1000: -200 ... +850°C Relay output: 2 (1) closing contacts (GIR 230 NTC: 1 relay output),
Accuracy: < 0.5 % f.s. ±1 digit (at nominal temperature = 25°C) 230V switching, switching power: 5A, 230VAC
Measuring rate: approx. 4 measurings / sec. Alarm output: NPN, open collector, switching power: 30mA, max. 28V
GIR 230 TC: Controller states: 2-point, 3-point*, 2-point with alarm, min/max alarm to
Measuring input: types J, K, N, S, T and 0-50 mV 1 output, min/max alarm to 2 outputs* (* = not available at GIR230NTC)
Measuring ranges, resolution: Switching points, hysteresis, alarm points: freely selectable
type : -170 ... +950°C type K: -270 ... +1350°C
Temperature probe
Others:
type N: -270 ... +1300°C type S: -50 ... +1750°C Display: approx. 10 mm high, 4-digit red LED-display
type T: -270 ... +400°C Operating conditions: -20 to +50 °C, 0 to 80 %RH (non condensing)
Accuracy: < 0.3 % f.s. ±1 digit (type S: < 0.5% f.s. ±1 digit) (at 25°C) Power supply: 230V, 50/60Hz, approx. 2 VA
Point of comparison: ± 1 °C Housing: glass fibre reinforced Noryl, front panel PC
Measuring rate: approx. 4 measurings / sec. Dimensions: 24 x 48 mm (front frame).
GIR 230 FR: Mounting depth: approx. 65 mm (incl. screw-type/plug-in terminal)
Measuring input: frequency (TTL-signal) Panel mounting: with VA-spring clamp.
Display range: -1999 ... 9999 digit, freely scaleable Allowed panel thicknesses from 1 to approx. 10 mm.
Accuracy: < 0.2 % f.s. ±1 digit (at nominal temperature = 25°C) Panel cut-out: 21.7+0.5 x 45+0.5 mm (H x W)
Frequency measuring: 0.000 Hz ... 10 kHz Connection terminal: screw-type/plug-in terminal:
Rotational speed: 0.000 U/min ... 9999 U/min, 4-pin (...NTC: 3-pin) for power supply and relay outputs and
selectable prescaler (1-1000) 4-pin (...NTC: 3-pin) for measuring input and alarm output
Counter up/down: 0 ... 9999 ( 10.000.000 with prescaler) For wire cross selections from 0.14 to 1.5 mm2.
Alarm / Protection
GIR 230 NTC: IP rating: front side IP54 (IP65 upon request)
Measuring input: NTC (2-wire) Noise immunity (EMC): EN61326 (appendix A, class B)
Measuring ranges: -40.0 ... +120.0°C
Accuracy: < 0.5 % f.s. ±1digit (at nominal temperature = 25°C) Option (upcharge)
Measuring rate: approx. 4 measurings / sec. - 2 V GIR with power supply 12 - 28 V DC W
NE
Suitable temperature probes Outputs: 2 (1) relay outputs, +Ub switching
Temperature probes (Pt100/1000) p.r.t. page 103/10 , 111-115
Accessories
Temperature probes (type K, S, N) p.r.t. page 105/109, 111-115
GGD2 8SET O-rings for device mounting IP65 (2 pieces)
GTF230S ntc-temperature probe, -40 ... +120°C
sensor sleeve made of st. steel , Ø 5 x 50 mm, approx. 1m silicone-cable Transducer p.r.t. page 80 - 102
pt o : longer probe cable (silicone) u ch r e e ch : for other accessories p.r.t. page 6
7
ront
48 x 96
Panel Instrument for Temperature ront
48 x 96
Handheld instrument
Digital thermometer Digital thermometer

for silicon sensors for thermocouples NiCr-Ni (type K )
GTH 83 EG GTH 1150 EG

-50 0 up to 150 0 °C -50 up to 1150 °C
Measuring range: -50.0 to 150.0 °C Measuring range: -50 to 1150 °C
Logger / EASYBus
Resolution: 0.1 °C Resolution: 1 °C

Sensor: KTY 83-110 (please order separately), Sensor: NiCr-Ni (type K) (please order separately)
dditional ero point offset possible via spindle dditional ero point offset possible via spindle
trimmer at bac side of device. trimmer at bac side of device.
Accuracy (display device): (at nominal temperature = 25°C) Accuracy (display device): (at nominal temperature = 25°C)
<0.5°C ±1 digit (from -10 to +120°C) < 1% ± 1 digit (from -20 to +550°C and 920 up to 1150° C);
Display: approx. 13mm high, 3 -digit, red LED-display <1.5% ± 1 digit (from 550 to 920° C),
Scan rate: approx. 3 measurements / sec. from -50 to -20° C acc. to correction table
Working temperature: 0 to 50 °C Display: approx. 13mm high, 3 -digit, red LED-display
Relative humidity: 0 to 80 %RH (non-condensing) Scan rate: approx. 3 measurements / sec.
Working temperature: 0 to 50 °C
Storage temperature: -20 to 70 °C
Relative humidity: 0 to 80 %RH (non-condensing)
Power supply: 230V 50/60Hz
Transmitter
Storage temperature: -20 to 70 °C

Option: 12/24/115V AC
Power supply: 230V 50/60Hz
12/24V DC
Option: 12/24/115V AC
Housing: standard rack-type housing, 48 x 96 x 100mm (H x W x D)
12/24V DC
IP rating: front side IP54 (with optional O-rings IP65).
Housing: standard rack-type housing, 48 x 96 x 100mm (H x W x D)
Panel cutout: 43 x 90.5 (H x W) IP rating: front side IP54 (with optional O-rings IP65).
Connection terminals: screw-type/plug-in terminals, Panel cutout: 43 x 90.5 (H x W)
max. terminal range 1.5 mm2
Conn. terminals: screw-type/plug-in terminals,
Noise immunity (EMC): max. terminal range 1.5 mm2
The GTH83EG is conforming to the regulations determined by the Noise immunity (EMC):
Temperature probe
Council for the Approximation of the Legislation amongst the Mem- The GTH1150EG is conforming to the regulations determined by
ber Countries concerning EMC (2004/108/EG). the Council for the Approximation of the Legislation amongst the
The device meets EN50081-1 and EN50082-2 requirements. Member Countries concerning EMC (2004/108/EG). The device
additional error: <1% meets EN50081-1 and EN50082-1.
additional error: <1%
Options (against upcharge) Options (against upcharge)

12VDC: Power supply: 12VDC 12VDC: Power supply: 12VDC
24VDC: Power supply: 24VDC 24VDC: Power supply: 24VDC
12VAC: Power supply: 12VAC 12VAC: Power supply: 12VAC
Alarm / Protection
Accessories Accessories
GGD 4 9 additional sealing for panel mounting IP65 GGD 4 9 additional sealing for panel mounting IP65
Suitable sensors Suitable sensors

GM 11/1 0 immersion probe Order all NiCr-Ni (type K ) - sensors without plug but with ferrule.
GM 30/1 0 immersion, air probe (p.r.t. pages 105 - 109, 114, 115)
GM 15/1 0 screw-type probe Custom-built sensors available. (p.r.t. pages 112 and 113).
Other probes or custom-built sensors available. (p.r.t. page 110).
4
Front
Universal Displaying Device
Handheld instrument
48 x 96
GIA 2000
easy operability - high accuracy - economic price
Temperature display, pressure control, tachometer, flow meter, etc., etc.
s
.Bu
.S.Y
E.A Modul
Universal inputs for normalized signals, frequency, Pt100,
-
Pt1000 and thermocouples
integrated isolated power supply for meas. transducer (24V / 22mA)
Serial interface - EASYBus (max. 240 devices can be combined)
Limit functions, digital filter, min-/max value memory
Specification
Measuring input: universal input for Power consumption: approx. 5 VA
Logger / EASYBus
- Normali ed signal: 4-20mA, 0-20mA, 0-1V, 0-2V, 0-10V, 0-50mV Operating temperature: -20 to +50 °C
- Resistance thermometer: Pt100 (3-wire), Pt1000 (2-wire) Relative humidity: 0 to 80 %RH (non condensing)
- Thermocouples: types J, K, N, S, T Storage temperature: -30 to +70 °C
- Frequency: TTL-signal, switching contact Housing: standard rack type housing 48 x 96 mm (front frame)
- Flow, Rotational speed: TTL-signal, switching contact installation depth: approx. 115 mm (inc screw t e u in ter in s)
- Counter up / down: TTL-signal, switching contact
Panel mounting: by fixing clamps
- Serial interface
Panel cutout: 43.0+0.5 x 90.5+0.5 mm (H x W)
Measuring rate: approx. 100 meas. / sec. (for norm. signal and
Electrical connection: via screw-type/plug-in terminals
frequency) resp. approx. 4 meas. / sec. (for temperature)
cable diameters from 0.14 to 1.5 mm2.
Measuring resp. display ranges, resolution: Protection class: front side IP54, with optional sealing IP65
Temperature: (display unit selectable: °C or °F) Electromagnetic immunity (EMC): EN61326 (appendix A, class B)
Pt100: -200 ... + 850°C or - 50.0 ... +200.0°C
Pt1000: -200 ... + 850°C Options (upon upcharge)
Transmitter
type : -170 ... + 950°C or - 70.0 ... +300.0°C
type K: -270 ... +1372°C or - 70.0 ... +250.0°C - 12VDC voltage supply = 12 VDC (11-14V) 1)
type N: -270 ... +1350°C or -100.0 ... +300.0°C - 2 VDC voltage supply = 24 VDC (22-27V) 1)
type S: - 50 ... +1750°C - 2 VAC voltage supply = 24 VAC ±5%
type T: -270 ... + 400°C or - 70.0 ... +200.0°C - 115VAC voltage supply = 115 VAC ±5%
Norm. signals: -1999 ... 9999 digit, scale freely adjustable
- recommended range: < 2000 digit - AAG020 analog output 0 - 20 mA, 4 - 20 mA (reversible) 1)
Frequency: 0.000 Hz ... 10 kHz, display freely scaleable - AAG010 analog output 0 - 10 V 1)
Rotational speed: 0.000 ... 9999 U/min, selectable prescaler: 1-1000 1) For analog output with option 12VDC o. 24VDC add. upcharge
Flow: 0 ... 9999 l/s, 0 ... 9999 l/min, 0 ... 9999 l/h
Temperature probe
Counter up/down: counter value remains on power loss Accessories

0 ... 9999 (10 Mio. with prescaler), GGD 896 additional sealing for panel mounting IP65
pulse frequency: < 10kHz
Serial interface: Displaying and controlling from values EAK 36 Unit stickers (black with white text)
for 36 different units for lettering of display devices.
coming via the serial interface.
Accuracy: (at nominal temperature = 25°C)
- Norm. signal: < 0.2 % f.s. ±1digit (at 0-50mV: < 0.3% f.s. ±1digit)
- Resistance thermometer: < 0.3 % f.s. ±1digit
- Thermocouples: < 0.3 % f.s. ±1digit (at type S: < 0.5% f.s. ±1digit)
Point of comparison: ± 1 °C
- Frequency, rotational speed, counter: < 0.1 % f.s. ±1digit
Analog output: (option)
Alarm / Protection
freely scaleable analogue output 0-20mA / 4-20mA or 0-10V

Display: approx. 13 mm high, 4-digit red LED-display
Interface: serial interface, elect. isolated, EASYBus compatible
Power supply for sensor: integrated isolated power supply for EBW 1 interface converter EASYBus => RS232 (p.r.t. page 76)
measuring transducer: 24 V DC ±5%, 22mA for c su 8 EBS 20M software for recording and archiving
Miscellaneous: permanent self-monitoring, digital filter function, of the measuring values (p.r.t. page 41).
measuring range boundary (limit) Temperature probes p.r.t. page 103 - 117
Voltage supply: 230 V AC, 50/60 Hz (standard)
optionally other supply voltages are possible for other accessories p.r.t. page 56/57, 78/79
9
Front Universal Displaying and Regulating Device
48 x 96
Handheld instrument
GIR 2002 On/Off - control mode
GIR 2002 PID with PID - control mode

easy operability - high accuracy - economic price
s
.Bu Highlights
.S.Y
E.A Modul
-
universal input for normalized signals, frequency, Pt100, Pt1000, thermocouple
2 relay switching outputs
1 analog output (0(4)-20mA or 0-10V) (optional)
5 programmable switching modes
electrical isolated power supply for a transmitter (24V / 22mA)
serial interface, bus operation
Additional at GIR 2002 PID

Logger / EASYBus
P, I, PI, PD or PID control mode

motorised valve control
continuous regulating output (optional)
Applications General
process regulating The universal controller GIR 2002 is the ideal device for simple control systems
temperature controller (on/off switching, relay outputs, ...), because of its compact construction and its
high ease of use.
Pressure monitoring
rotation speed display

The GIR 2002 PID (basic version) supplies one control output for a 2-point-con-
trol the types of control P, I, PI, PD or PID and a second control output for on/off
flow counter
switching.
etc. The device can also be configured as a 3-point motori ed valve controller or
Transmitter
as controller with continuous output (optionally).

Specification:
Measuring input Measuring / display ranges Accuracy Measuring rate
(at nominal temperature)
Thermocouples
FeCu-Ni type J IEC 584 -70,0 ... +300,0°C or -170 ... 950°C < 0,3 % FS ±1 digit *
NiCr-Ni type K IEC 584 -70,0 ... +250,0°C or -270 ... 1372°C < 0,3 % FS ±1 digit *
NiCrSi-NiSi type N IEC 584 -100,0 ... +300,0°C or -270 ... 1350°C < 0,3 % FS ±1 digit * approx. 4 meas. / sec.
Pt10Rh-Pt type S IEC 584 -50 ... 1750°C < 0,5 % FS ±1 digit *
Temperature probe
Cu-CuNi type T IEC 584 -70,0 ... +200,0°C or -270 ... 400°C < 0,3 % FS ±1 digit *
Resistance thermometer
Pt100 3-wire DIN EN 60751 -50,0 ... +200,0°C or -200 ... 850°C < 0,3 % FS ±1 digit
approx. 4 meas. / sec.
Pt1000 2-wire DIN EN 60751 -200 ... 850°C < 0,3 % FS ±1 digit
Action signals / normali ed signal
0 ... 1 V, 0 ... 2 V, 0 ... 10 V < 0,2 % FS ±1 digit
0 ... 20 mA, 4 ... 20 mA -1999 ... +9999 Digit, scale freely adjustable < 0,2 % FS ±1 digit approx. 100 meas. / sec.
0 ... 50 mV < 0,3 % FS ±1 digit
Frequency
TTL-signal 0,000 Hz ... 10 kHz, scale freely adjustable
Switching contact NPN 0,000 Hz ... 3 kHz, scale freely adjustable < 0,1 % FS ±1 digit approx. 100 meas. / sec.
Alarm / Protection
Switching contact PNP 0,000 Hz ... 1 kHz, scale freely adjustable

Rotational speed 0,000 ... 9999 U/min. selectable prescaler: 1-1000,
pulse frequency: max. 600 000 Imp./min. at TTL
Flow 0 ... 9999 l/s, 0 ... 9999 l/min. or 0 ... 9999 l/h
Counter up / down
TTL-signal, 0 ... 9999 or 0 ... 999 000 (with prescaler)
switching contact (NPN, PNP) selectable prescaler 1-1000, < 0,1 % FS ±1 digit approx. 100 meas. / sec.
pulse fre uency ma . 10 000 mp. sec. at
Serial interface: displaying and controlling from values coming via the serial interface
* = Point of comparison: ± 1 °C
50
General (continuance)
Handheld instrument
Due to the universal input and the various switching functions If the device is used as a thermocouple ore resistance thermometer,
the controller can be optimally adapted to the requirements of the the measuring value can be alternatively displayed in °C or °F.
system. By means of an offset correction the measured value can be scaled
The structured menu navigation allows a straightforward handling i.e. to the resistivity of the wires.
and a fast adjustment of the parameters. The current and voltage inputs can be arbitrarily scaled in the range
A LED switching position display gives information to the user of 1999 to +9999.
about the current status of the switching outputs. The GIR 2002 has a serial, bus-compatible interface by default,
The automatic self-test and diagnostic system ensures maxi- by which a comfortable adjustment of the parameters as well as
mum operational safety and reports systems errors by conclusive recording of measured values is possible.
error codes. With the optionally available Windows library EASYBUS.dll up to
The parameters are automatically saved, so that all data will be 240 devices can be integrated into own programs (i.e. LabView).
maintained even in case of a power blackout.
Among others most of the GREISINGER transmitters, rpm sensors
and flow rate sensors can be connected directly to the integrated
transmitter power supply (24VDC/22mA) of the controller.
Specification:
Outputs: Please note ot all options are available for both device types and Display: approx. 13 mm high, 4-digit red LED-display
not all options can be combined with each other. Please see there- Min-/Max-value memory: the max- and min value will be stored.
fore the output options diagram. Interface: serial interface, electrical isolated, EASYBus compatible
Output 1: voltage free relay output (standard) Power supply for sensor:
24 V DC ±5%, 22mA for c su 8
normally-open contact, switching power: 5 A (ohmic load), 250 VAC
Miscellaneous: permanent self-monitoring, digital filter function,
- optional: HLR1: control output for semiconductor relay (6 VDC / 15 mA)
measuring range boundary (limit)
AAG..1: freely scaleable analog output 0(4)-20mA or 0-10V
ST..1: continuous output 0(4)-20mA or 0-10V Voltage supply: 230 V AC, 50/60 Hz (atandard)
optionally other supply voltages are possible
Output 2: voltage free relay output (standard)
Logger / EASYBus
change-over contact, switching power: 10 A (ohmic load), 250VAC Power consumption: approx. 6 VA
- optional: HLR2: control output for semiconductor relay (6 VDC / 15 mA) Operating conditions: -20 ... +50 °C, 0 ... 80 %RH (non condensing)
Output 3: (not available at standard device type) Housing: standard rack type housing 48 x 96 mm (front frame)
- optional: REL3: voltage free relay output (chance-over contact) installation depth: approx. 115 mm (incl. screw-type/
switching power: 1 A / 40 VAC or 30 VDC plug-in terminals)
HLR3: control output for semiconductor relay (14 VDC / 15 mA) Panel mounting: with fixing clamps
NPN3: elec. isolated NPN-switching contact (max. 1 A / 30 VDC) panel cutout: 43.0+0.5 x 90.5+0.5 mm (H x W)
AAG..3: freely scaleable analog output 0(4)-20mA or 0-10V Electrical connection: via screw-type/plug-in terminals
ST..3: continuous output 0(4)-20mA or 0-10V cable diameters from 0.14 to 1.5 mm2.
Controller states: 5 or 6, selectable Protection class: front side IP54, with optional sealing IP65
(e.g. 2-point regulator, 3-point regulator, ...) Electromagnetic immunity (EMC): EN61326 (appendix A, class B)
Switching point, hysteresis: freely adjustable
Response time: < 25 msec. at normalized signals
< 0.5 sec. at temperature and frequency
Transmitter
Options:
GIR 2002 GIR 2002 PID
Output schema
out 1 out 2 out 3 out 1 out 2 out 3
Standard type: normally- chance-over -- normally- chance-over --
open contact contact open contact contact
available output options upcharges
HLR1: output 1 = control output for external SSR
Temperature probe
REL3: output 3 = relay (chance-over contact)

NPN3: output 3 = npn-switching output
AAG020/1: output 1 = analog output 0(4) - 20 mA no out
AAG010/1: output 1 = analog output 0 - 10 V possible
AAG020/3: output 3 = analog output 0(4) - 20 mA

AAG010/3: output 3 = analog output 0 - 10 V
STA1: output 1 = continuous output 0(4) - 20 mA no out
STV1: output 1 = continuous output 0 - 10 V possible
STA3: output 3 = continuous output 0(4) - 20 mA

Alarm / Protection
STV3: output 3 = continuous output 0 - 10 V

1)
At continuous or analog output or npn-switching output with option voltage supply = 12 VDC or 24 VDC add. upcharge
2)
At output type REL3 or HLR3 with option voltage supply = 12 VDC add. upcharge
Further Options: upcharge Accessories:

- 12VDC voltage supply: 12 VDC (11-14V) 1) GGD 896 additional sealing for panel mounting IP65
- 2 VDC voltage supply: 24 VDC (22-27V) 1) EAK 36 Unit stickers (black with white text) for 36
different units for lettering of display devices (p.r.t. page 49)
- 2 VAC voltage supply: 24 VAC ±5%
Temperature probes p.r.t. page 103 - 117
- 115VAC voltage supply: 115 VAC ±5%
for other accessories p.r.t. page 1, 56, 57, 78, 79
51
Front
Front
Controller with external
48 x 96 48 x 96 2-channel difference controller
Handheld instrument
predetermined desired value

s s
.Bu .Bu
.S.Y .S.Y
E.A Modul E.A Modul
- -
*1
GIR 2002 / SW GIR 2002 NS / DIF - ...
GIR 2002 PID / SW 1 Please state your desired input signal at order transaction
020 = (2x) 0-20 mA, 420 = (2x) 4-20 mA, 010 = (2x) 0-10 V
Applications Applications
predetermined control difference controller for 2 channels
program control with external set point
detection of leaks
Logger / EASYBus
temperature regulation dependent on ambient temperature

control of delivery and exit air
flow rate regulation with set point input via rotary
potentiometer pressure compensation

etc.
etc.
General General
The technical data of the set-point-regulators are largely identical The GIR 2002 NS / DIF is a display, control and regulating
to that ones of the GIR 2002 and GIR 2002 PID. The difference device for difference measurements. The measuring inputs are
is that the input for 0-10V normalized signals is used as set-point designed for standard signals. Please state your desired input
input. signal at order transaction.
Measuring input: universal input for Measuring inputs: (2 x) 4-20 mA, (2 x) 0-20 mA or (2 x) 0-10 V
Transmitter
- normali ed signals: 4-20 mA, 0-20 mA, 0-1 V, 0-2 V, 0-50 mV lease state your desired input signal at order transaction!
- resistance thermometer: Pt100 (3-wire), Pt1000 (2-wire) Display range: -1999 ... 9999 digit,
- thermocouples: types J, K, N, S, T decimal point, initial and final values freely selectable
- frequency: TTL-signal, switching contact Recommended range: < 2000 digit
- flow, rotational speed: TTL-signal, switching contact Accuracy: < 0.2 % FS ±1 digit (at nominal temperature = 25°C)
- counter up/down: TTL-signal, switching contact Measuring rate: approx. 100 meas. / sec.
Display range: -1999 ... 9999 digit, Display/regulation: difference: input 1 - input 2
decimal point, initial and final values freely selectable Outputs: 1 normally open contact, 1 change-over contact
Recommended range: < 2000 digit output options li e R-control output, analog output
Set-point input: 0 ... 10 V, freely scalable or continuous output available - p.r.t. page 51
Temperature probe
Outputs: 1 normally open contact, 1 change-over contact Controller states: 5 or 6, selectable

output options li e R-control output, analog output (e.g. 2-point-regulator, 3-point-regulator, ...)
or continuous output available - p.r.t. page 51 Limit values: freely selectable
Controller states: 5 or 6, selectable Miscellaneous:
(e.g. 2-point-regulator, 3-point-regulator, ...) Display: approx. 13 mm high, 4-digit red LED-display
Limit values: freely selectable Operating conditions: -20 ... +50 °C, 0 ... 80 %RH (non condensing)
Miscellaneous: Voltage supply: 230 V AC, 50/60 Hz, approx. 6 VA
Display: approx. 13 mm high, 4-digit red LED-display Housing: standard rack type housing 8 x 96 mm (front frame)
Operating conditions:-20 ... +50 °C, 0 ... 80 %RH (non condensing) installation depth: approx. 115 mm (incl. screw-type/ plug-in terminals)
Voltage supply: 230 V AC, 50/60 Hz, approx. 6 VA Panel mounting: with fixing clamps
Housing: standard rack type housing 8 x 96 mm (front frame) panel cutout: 43,0+0.5 x 90,5+0.5 mm (H x W)
Alarm / Protection
installation depth: approx. 115 mm (incl. screw-type/ plug-in terminals) Electrical connection: via screw-type/ plug-in terminals:
Electrical connection:
via screw-type/ plug-in terminals: cable diameters from 0.14 to 1.5 mm2.
cable diameters from 0.14 to 1.5 mm2. Protection class: front side IP54 (IP65 on request)
Protection class: front side IP54 (IP65 on request) Electromagnetic immunity (EMC): EN61326 (appendix A, class B)
Electromagnetic immunity (EMC): EN61326 (appendix A, class B)
for further technical date refer to G page 1
for further technical date refer to G page 1 Options (upon upcharge)
Options (upon upcharge) - output for HLR-connection (HLR1, HLR2) see page 1
- output options (e.g. HLR.., AAG..., ST...) see page 1 - analog output (AAG.../..) see page 1
- other voltage supply see page 1 - other voltage supply see page 1
52
Front
Temperature regulator
Handheld instrument
48 x 96
GIR 2000 Pt cpl. with probe

GIR 2000 Pt OF without probe
measuring input for Pt100 (3-wire)
temperature probe in scope of supply
integrated switching output
min-/max value memory
Logger / EASYBus
Specification
Measuring input: Pt100 (3-wire) Voltage supply: 230 V AC, 50/60 Hz (standard)
Measuring range: -50.0 ... +200.0°C optionally other supply voltages are possible
Resolution: 0.1°C Power consumption: approx. 5 VA
Measuring rate: approx. 4 meas. / sec. Operating temperature: -20 to +50 °C
Accuracy: < 0.3 % FS ±1digit (at nominal temperature = 25°C) Relative humidity: 0 to 80 %RH (non condensing)
Temperature probe: GTF200 Pt100 / 3-wire Storage temperature: -30 to +70 °C
Pt100-probe, DIN class B (±0.3°C at 0°C), V4A-tube Ø5mm 50mm Housing: standard rack type housing 48 x 96 mm (front frame)
length, approx. 1m silicone cable. (in scope of supply at GIR2000Pt) installation depth: approx. 115 mm (inc screw t e u in ter in s)
Transmitter
Panel mounting: by fixing clamps
Panel cutout: 43.0+0.5 x 90.5+0.5 mm (H x W)
Electrical connection: via screw-type/plug-in terminals
cable diameters from 0.14 to 1.5 mm2.
Output: voltage free relays output, change-over-contact,
Protection class: front side IP54, with optional sealing IP65
switching power: 10A (ohmic load), 250VAC
Electromagnetic immunity (EMC): EN61326 (appendix A, class B)
Controller state: 2-point, min-/max-alarm
Switching point: freely adjustable Options (upon upcharge)
Response time: < 0.5 sec.
- 12VDC voltage supply = 12 VDC (11-14V)
Temperature probe
Display: approx. 13 mm high, 4-digit red LED-display

- 2 VDC voltage supply = 24 VDC (22-27V)
Miscellaneous: permanent self-monitoring, digital zero point and - 2 VAC voltage supply = 24 VAC ±5%
scale adjustment - 115VAC voltage supply = 115 VAC ±5%
Accessories Accessories (probes)

GGD 896 additional sealing for panel mounting IP65 GTF 199 Pt100-probe, 3-wire, -50 ... +400°C
DIN class B, V4A-tube Ø3 x 100mm, approx. 1m silicone cable
APG- Housing for surface mounting (incl. seal GGD4896)
device assembled in housing
Alarm / Protection
Dimensions: 75 x 125 x 127 mm H

(without screw connections)
Cable insert: screw connections M12x1.5 GRO 200 Pt100 tube surface probe, -50 ... +200°C
DIN class B, sensor body made of aluminium, approx. 2m silicone cable
and M16x1.5
additional suitable temperature probes p.r.t. page 11
53
Digital controller for temperature and process values digital controller for temperature and process values
Handheld instrument
Front Front
33 x 75 33 x 75
K 31
K 32
Autotuned, microprocessor based digital controller Autotuned, microprocessor based digital controller
with 2-, 3-point or PID control with 2-, 3-point or PID control
and adjustable set point gradient (ramp function)
R 38 (33 x 75 mm) W K 31 (33 x 75 mm)

NE
K 32 (33 x 75 mm)
Measuring input: Please specify type re uired on order! Measuring input:
- Thermocouples: J, K - Pt100 (3-wire) and thermocouples: J, K, S, R and T
- Pt100 (2-wire) - PTC KT 81-121, NTC 103AT-2
- PTC KT 81-121, NTC 103AT-2 - normalized signals: 0(4) ... 20 mA
Logger / EASYBus
- Pt1000 (2-wire) - normalized signals: 0(1) ... 5 Volt and 0(2) ... 10 Volt
Type J: -40...999°C, Type K: -40...999°C, Pt100: -50,0...850°C Pt100: -200...850°C PTC: -55...+150°C NTC: -50...+110°C
PTC: -50,0...+150°C NTC: -50,0...+109°C Pt1000: -50,0...-850°C Typ J: -0...1000°C, Typ K: 0...1370°C, Typ S: 0...1760°C
Resolution: temperature: 0,1 or 1°C Resolution: temperature: 0.1, 1°C bzw. 0.1, 1°F
(Pt100, Pt100, PTC and NTC: autoranging) normalized signals: scale freely adjustable, -1999...9999 digit
Accuracy: ± 0.5 % FS ±1 digit Accuracy: ± 0.5 % FS ±1 digit
Display-Refresh-Time: 1 sec. Display: 4-digit, 12 mm high LED-display (K31) resp.
Display: 3-digit, 16 mm high LED-display two lines, each 4-digit, 7 mm high LED-display (K32)
Outputs: 1 or 2 switching outputs Outputs: till 4 switching outputs
available output versions available output versions
- relay output (SPDT, switching power: 8A/3A, 250VAC) - relay output (R1 / R2) (change over, switching power: 8A/3A, 250VAC)
- solid state relay (SSR drive): 10 V DC / 10 mA - relay output (R3 / R4) (close contact, switching power: 5A/1A, 250VAC)
Controller state: 2-point, 3-point or PID control. - solid state relay (SSR drive): 8V DC / 8mA
Transmitter
Autotuning: the autotuning function guarantees the most briefly program- Controller state: 2-point, 3-point or PID control.
ming of all requested values. Autotuning: integrated autotuning function
Housing: 75 x 33 x 64 mm, panel cutout: 71 x 29 mm, Timer / Programm Controller (optionally): timer realisation / Programm
Mounting by means of clamping frame controller function with 8 segments / 4 groups with time and gradient.
Protection class: front IP65 (mounted in panel with gasket) Housing: 75 x 33 x 64 mm, panel cutout: 71 x 29 mm,
Electric connection: screw-type terminals Protection class: front IP65
Operating conditions: 0 ... +50 °C, 20 ... 85 % RH. (non condensing) Electric connection: screw-type terminals
Storage temperature: -30 ... +70 °C Operating conditions: 0 ... +55 °C, 30 ... 95 %RH. (non condensing)
Power supply: 00 0 0 of no in ue Power supply: standard: 12 VAC ±10%, 50/60Hz a. 12 VDC ±10%
Power consumption: max. 5 VA options: 24 VAC/DC ±10% or 90...240 VAC ±10%, 50/60Hz
Implementations, Options: Power consumption: approx. 4 VA
Temperature probe
1. Power supply: Implementations, Options:

F: power supply: 12V AC/DC
1. Functions:
L: power supply: 24V AC/DC -: controller
H: power supply: 90...240V AC T: controller + timer
2. Measuring input: P: controller + programm controller
F: meas. input: Thermocouples 2. Power supply:
A: meas. input: Pt100 F: power supply: 12V AC/DC
T: meas. input: PTC, NTC, Pt1000 L: power supply: 24V AC/DC
3. Output 1: H: power supply: 90...240V AC
R: relay output 3. Measuring input:
O: SSR drive C: meas input: Pt100 und Thermoelement
4. Output 2: E: meas input: PTC, NTC
I: meas input: current (0-20mA, 4-20mA)
R: relay output
V: meas input: voltage 0 5 , 0 0 , 5 , 0
Alarm / Protection
O: SSR drive
4. Outputs: 1Rel. 2Rel. 3Rel. 4Rel.
R: relay-output
Orderinformation: tte t o me p t to e t te O: SSR drive
1. 2. 3. 4. 5. Serial Interface:
R 38 S: with serial interface (RS485)
R 38 L A RR: R38 with meas. input Pt100 and 2 outputs (2x relay) Orderinformation: tte t o me p t to e t te
1. 2. 3. 4. 5.
K 31
K 31 - H E RO-- -: K 31 with meas. input Pt100, 230VAC power supply
and 2 outputs (1x relay, 1x SSR drive)
5
digital controller for temperature and process values digital controller for temperature and process values
Handheld instrument
Front Front
48 x 48 48 x 48
Autotuned, microprocessor based digital controller Autotuned, microprocessor based digital controller
with 2-, 3-point or PID control, 3-point motor valve control and with 2-, 3-point or PID control
adjustable set point gradient (ramp function)
TLK 43 (48 x 48 mm) K 48 (48 x 48 mm)

Measuring inputs: universal input for Measuring inputs: universal input for
- resistance thermometer: Pt100 (3-wire) - resistance thermometer: Pt100 (3-wire)
- PTC KT 81-121, NTC 103AT-2 (2-wire) - PTC KT 81-121, NTC 103AT-2 (2-wire)
- Thermocouples: B, C, E, J, K, L, N, R, S, T - Thermocouples: J, K, S, R, T, IR
- Normalized signals: 0...20mA, 4...20mA, 0...5V, 0...10V, 1...5V, 2...10V - Normalized signals: 0...20mA, 4...20mA, 0...5V, 0...10V, 1...5V, 2...10V
- mV signals: 0...50mV, 0...60mV, 12...60mV - mV signals: 0...50mV, 0...60mV, 12...60mV
Logger / EASYBus
Pt100: -200...850°C PTC: -55...+150°C NTC: -50...+110°C Pt100: -200...850°C PTC: -55...+150°C NTC: -50...+110°C
Type J: -160...1000°C, Type K: -270...1370°C, Type S: -50...1760°C Type J: -160...1000°C, Type K: -270...1370°C, Type S: -50...1760°C
Resolution: temperature: 0.1, 1°C or 0.1, 1°F Resolution: temperature: 0.1, 1°C or 0.1, 1°F
normalized signals: scale freely adjustable, -1999...9999 digit normalized signals: scale freely adjustable, -1999...9999 digit
Accuracy: ±0.15 % FS ±1 digit Accuracy: ±0.15 % FS ±1 digit
Display: two lines, each 4-digit, 7 mm high LED-display Measuring rate: approx. 8 measurements / sec.
Outputs: up to max. 4 outputs Display: 4-digit, 12 mm high LED-display
available output versions (standard = relay-output) Outputs: up to max. 3 outputs
- relay output (close contact, switching power: 5A/2A, 250VAC) available output versions (standard = relay-output)
- solid state relay (SSR drive): 14V DC / 7mA - relay output (R1/R2) (close contact, switching power: 8A/3A, 250VAC)
- normalized signal 0(4) ... 20 mA or 0(2) ... 10 Volt - relay output (R3) (close contact, switching power: 5A/2A, 250VAC)
Please pic the possible combinations from the utput options -table. - solid state relay (SSR drive): 14V DC / 20mA
Controller state: 2-point, 3-point or PID (single or double action) control, Please pic the possible combinations from the utput options -table.
continuous, 3-point motor valve control Controller state: 2-point, 3-point or PID (single or double action) control
Transmitter
Autotuning: integrated autotuning function Autotuning: integrated autotuning function
Alarm outputs: max. 3 (depending from output configuration) Timer / Programm Controller (optionally): timer realisation / Programm
Analog output: scaleable (normalized signal output necessary) controller function with 8 segments / 4 groups with time and gradient.
Interface option : RS485, optoisolated Alarm outputs: max. 3 (depending from output configuration)
Control input o tion : digital input that permit the remote commutation of the set point. Interface option : RS485, optoisolated
Heater break function option : the controller is available with a current Housing: 48 x 48 x 98 mm, panel cutout: 45.5 x 45.5 mm,
transformer input for the heater break monetoring Mounting by means of clamping frame
Housing: 48 x 48 x 98 mm, panel cutout: 45.5 x 45.5 mm, Protection class: front IP54 (mounted in panel with gasket)
Mounting by means of clamping frame Electric connection: screw-type terminals
Protection class: front IP54 (mounted in panel with gasket) Operating conditions: 0 ... +55 °C, 30 ... 95 %RH. (non condensing)
Power supply: standard: 90...240 VAC ±10%, 50/60Hz.
Temperature probe
Electric connection: screw-type terminals

Operating conditions: 0 ... +55 °C, 30 ... 95 %RH. (non condensing) option: 24 VAC ±10%, 50/60Hz and 24V VDC ±10%
Power supply: standard: 90...240 VAC ±10%, 50/60Hz., approx. 10VA
Implementations, Options:
option: 24 VAC ±10%, 50/60Hz and 24 VDC ±10%
1. Functions:
Implementations, Options: -: controller
1. Power supply: T: controller + timer
L: power supply: 24V AC/DC P: controller + programm controller
H: power supply: 90...240V AC 2. Power supply:
2. Outputs: 1Rel. 2Rel. 3Rel. 4Rel. L: power supply: 24V AC/DC
R: relay-output H: power supply: 90...240V AC
O: SSR drive 3. Measuring input:
C: Normalized signalsl 0(4)...20mA C: meas input: Pt100 und Thermoelement
V: Normalized signals 0(2)...10V E: meas input: PTC, NTC
imitations f R 4 5 is chosen, 4 is not possible.
Alarm / Protection
I: meas input: current (0-20mA, 4-20mA, ...)

and 4 have to have the same output option. V: meas input: voltage 0 5 , 0 0 , 5 , 0 ,
3. Digital control input and serial interface: 4. Outputs: 1Rel. 2Rel. 3Rel.
I: with control input and serial interface (RS485) R: relay-output
. Heater break function: O: SSR drive
H: current transformer input D: digital control input
Orderinformation: whereas R1 and R switching R 5 switching
1. 2. 3. 4. Orderinformation:
TLK 43 1. 2. 3. 4.
TLK 43 L RROO I -: TLK 43 with serial interface and 4 outputs K 48
(2x relay and 2x SSR). K 48 - L C RR -: K 48 with serial interface and 2x relay.
55
Housing for surface mounting for build in of devices with the format 24 x 48 or 48 x 96 mm
Handheld instrument
Ordering type / description suitable for price
APG-1 * Housing for surface mounting incl. seal GGD2448

Dimensions: 80 x 82 x 95 mm (H x W x D), without elbow-plug
Panel cutout: for 1 display at the format 24 x 48
Connection: elbow-plug in according DIN43650, 4-pin GIA 20 EB
GIR 230 ...
GIA 0 20
Dimensions: 80 x 82 x 95 mm (H x W x D), without screw connections
GIA 0 20 SP
Cable insert: 2 x screw connections M12x1.5

GIA 2 8 /WE
GTH2 8/1,2,3
Dimensions: 80 x 82 x 95 mm (H x W x D), without screw connections
Panel cutout: for 2 displays at the format 24 x 48
Cable insert: 2 x screw connections M12x1.5

Dimensions: 75 x 125 x 126 mm (H x W x D), without screw connections GIR 1002 ...,
Cable insert: screw connections M12x1.5 and M16x1.5 GIA 2000, GIR 2000 Pt
Logger / EASYBus

GIR 2002 ...,
Dimensions: 175 x 125 x 126 mm (H x W x D), without screw connections GTH 87 EG,
Panel cutout: for 2 displays at the format 48 x 96
Cable insert: screw connections 2 x M12x1.5 and 2 x M16x1.5 GTH 1150 EG
Note: All housings without installation device and without unit sticker These (see page 9) have to be ordered separately
The Installation device will be assembled for free in the housing (on common order) if desired.
e em le mo t pl te for even easier mounting of the transmitters and devices in 80 x 82 housing

Transmitter
all devices at
MP 8082 mounting plate for 80 x 82 housings
80 x82-housing: e.g.
he ounting pl te will be sse ble to the or ere e i e e wor s
he ounting ps llow ire t ounting to the w ll without opening the housing GTMU, GRHU, GHTU,
GMUD, GPHU 01 MP,
Dimensions: 80 x 114 x 6 mm (H x W x D) O Y 3610 MP, APG-1
ther design types upon re uest
Semiconductor Relais
Temperature probe
HLR 50A semiconductor relay

incl. suitable touch-guard protection cap
Switching voltage: 48 ... 530 V AC
Switching current: max. 50 A
Control voltage: 3 - 32 V DC
Isolation voltage: 4000V
Operating temperature: -40...+80°C
Dimensions: approx. 59 x 46 x 35 mm
D53 TP50D 3 phase semiconductor relay

incl. suitable touch-guard protection cap
Alarm / Protection
Switching voltage: 48 ... 530 V AC

Switching current: max. 50 A
Control voltage: 3 - 32 V DC
Isolation voltage: 4000V
Operating temperature: -40...+80°C
Dimensions: approx. 100 x 75 x 35 mm
D53-3P Suitable heat sink for D53TP50D

snap-on mounting on hat rail
RC-element 230 VAC for inductive switching loads

(solenoids, relay, motors etc.)
5
Power supply
Handheld instrument
GNG 220 / 2
Power supply device integrated in snap-on housing for top hat rail - for 2 transmitter
Input voltage: 230 V, 50/60 Hz
Output voltage: 2 x 18 V DC ±5%, 25 mA each
Dimensions: 48 x 96 x 52 mm (W x H x D)
Mounting: snap-on to top hat rail
GNG 220 / 2 - 12V

identical to GNG220/2, but with output voltage 2 x 12 V DC, 30 mA each
GNG 220
identical to GNG220/2, but with output voltage 1 x 12 V DC, 100 mA, unregulated
GNG 12 / 300
Power supply device integrated in snap-on housing for top hat rail
Input voltage: 230 V, 50/60 Hz
Output voltage: 12 V DC ±5%, 300 mA
Dimensions: 70,4 x 96 x 62 mm (W x H x D)
Mounting: snap-on to top hat rail
GNG 24 / 150
identical to GNG12/300, but with output voltage: 24 V DC ±5%, 150 mA
other voltage upon re uest
Logger / EASYBus
DC/DC-converter
GNG 12 / 24
GNG 24 / 24
DC/DC-converter to electrically isolate 12V or 24V DC-supply voltages
Input voltage: GNG12/24: 10 - 18 V DC
GNG24/24: 19 - 30 V DC
Output voltage: 24 V DC ±5%, max. 80 mA, electrically isolated
Insulating voltage: 500 V
Operating temperature: -20 ... +70° C
Mounting: snap on to top hat rail.
Transmitter
Dimensions: minimum space requirements due to narrow rack housing
(module fully encapsulated). Installation width only 22.5 mm.
GNG 12 / 2 x 24
GNG 24 / 2 x 24
Input voltage: GNG 12 / 2 x 24: 10 - 18 V DC
GNG 24 / 2 x 24: 19 - 30 V DC
Output voltage: 2 x 24V DC ±5%, max. 80 mA each, electrically isolated
other data identical to GNG12/24 resp. GNG24/24
Temperature probe
Power supply and relay module (e.g. for GIA20EB)

GNR10 Power supply and relay module for top-hat rail
Power supply for one GIA20EB and one transducer.
Input voltage: 230V, 50/60Hz (others upon request)
Output voltage: approx. 11V DC (unregulated) for the supply of a GIA20EB.
18V DC ±5% (regulated), 25 mA for meas. transducer
Relay outputs: 2 volt-free changeover contacts,
switching current: max. 10 A ohmic load.
Connection: screw-type terminal
Alarm / Protection
Mounting: snap on to top hat rail
GR10 Relay module for top-hat rail

for one GIA20EB to mounting to a top-hat rail
Input voltage: 12V DC (others e.g. 24VDC upon request)
Relay outputs: 2 volt-free changeover contacts,
switching current: max. 10 A ohmic load.
Mounting: snap on to top hat rail
57
Self-supplying plug-in display for -20 mA measuring transducer
Handheld instrument
no auxiliary energy source required - device will tap from loop current.
GIA 0 20 VO GIA 0 20 VOT

Logger / EASYBus
GIA 0420 VO ohne Tasten no auxiliary energy source required - device will tap
from 4 to 20 mA loop current.
GIA 0420 VOT mit Tasten scale freely adjustable on site within seconds, no auxil-
iary devices required
GIA 0420 VOT - ex can be turned to any position, fits in any position regard-
with Ex-protection for all potentially explosive atmospheres less of transmitter location
Ex plug-in display available 2nd quarter 2011
large display range from -1999 to 9999 Digit.
Specification: maximum accuracy and minimum temperature drift
Input signal: 4-20 mA large, 10 mm high LCD
Transmitter
Voltage load: approx. 2 V (at ...-ex: approx. 3.5 V) plug-in wherever required and device will be ready! The
Accuracy: ±0.2% FS ±1digit (at nominal temperature = 25°C) quickest way possible to get an on site display for your
Display: 10 mm high LCD 4 to 20 mA measuring transducers.
Display range: -1999 up to +9999 monitoring for probe damage, probe short circuit, values
Decimal point: any position above/below permissible limit
Scale: freely adjustable via 3 buttons (accessible
steady display even if transmitter signal is disturbed: due
after cover has been removed)
to software filters (can be switched on/off)
Measuring rate: approx. 5 measurements / sec.
Temperature probe
Filter: adjustable
Limit: 3 limit functions selectable:
LI 0: Values above/below range permissible Option:
LI 1: Values above/below range not permissible
LI 2: When range is exceeded, the refering rail will be displayed - S2 design type with 2 electrically isolated switching outputs
Switching outputs: (only devices with option ) e i er inc connectin c e for connection of oth switchin out uts
tion not in co in tion with e ice i e
2 electrically isolated open collector outputs,
connection via separate M8 jack
Switching point, switching hysteresis: freely adjustable
max. switching voltage: 28 V GIA 0420 WKT
max. switching current: 1 A
Reaction time: < 20 ms GIA 0420 WKT - ex
Alarm / Protection
Min./Max. value memory: memorizing of max. and min. values. with Ex-protection for all potentially explosive atmospheres
Operation, Configuration: via 3 keys.
Working conditions: -25 to +50°C, 0 to 80 % RH (non-condensing)
Electric connection: special-adapter design for cubic plug
Specification:
DIN 43650 for simple plug-in wherever required. 2 screws (68 and as GIA 0 20 VOT however
75 mm) included in scope of supply. Electric connection: connection to any stand-
Housing: ABS, keypad (resp. transparent panel made of polycarbonate) ard signal source (4-20mA) via 2 m connection
approx. 48,5 x 48,5 x 35,5 mm (H x W x D) without special adapter cable. Housing with mounting holes can be
approx. 50,5 x 90 x 39,5 mm (H x W x D) with special adapter mounted to any surface whatsoever.
Protection rating: IP65 (when mounted appropriately)
58
Unrivaled High Tech In Miniature Format
Handheld instrument
GRA 0420 VO
Plug on controller/display needs no auxiliary energy
freely scaleable via 3 keys or via optional configuration interface
LED-display

no auxiliary energy source required (device will tap from 4

to 20 mA loop current)
with 1 open collector output (standard)
optional with 2 electrically isolated high current open collec-
tor switching outputs (28V / 1A)
can be configured as 2 or 3 point controller, 2 point controller
with min-/max-alarm or separate min-/max-alarm
3 limit functions, 3 filter stages selectable preference state of switching outputs
Logger / EASYBus
alarm delay adjustable extreme fast controlling and supervision (reacting time <20ms)
extensive self check and diagnosis alternatively available version: 0-10V (auxiliary energy required)
system
Min./Max. value memory
GRA 0420 VO Min./Max. value memory: memorizing of max. and min. values.
Without auxiliary energy, output 4-20mA, 1 electrically isolated Operation, Configuration: via 3 keys.
switching output. Working temperature: -25 to +50°C
Relative humidity: 0 to 80 % RH (non-condensing)
GRA 010 VO Electric connection: special-adapter design for cubic plug
Output 0-10V, 1 +Ub-switching switching output. DIN 43650 for simple plug-in wherever required. 2 screws (68 and
Transmitter
75 mm) included in scope of supply.
Specification: Housing: ABS, keypad (resp. transparent panel made of polycarbonate)
GRA 0 20 VO... GRA 010 VO.. approx. 48,5 x 48,5 x 35,5 mm (H x W x D) without special adapter
Input signal: 4 ... 20 mA (2-wire) 0 ... 10 Volt (3-wire) approx. 50,5 x 90 x 39,5 mm (H x W x D) with special adapter
Voltage load: < 5.5 V Protection rating: IP65 (when mounted appropriately)
Input resistance: approx. 30 kOhm
Supply voltage: 12 - 28 Volt
Supply current: from current loop < 10 mA Option:
Display: 4 digit LED, approx. 7 mm high - S2 design type with 2 electrically isolated switching outputs
ut uts with incre se switchin current, connection i se r te M8 c
Temperature probe
Display range: -1999 ... 9999 digit,

first and last value freely adjustable e i er inc connectin c e for connection of oth switchin out uts
Recommended range: < 2000 digit - OT design type without pushbuttons in the cover
Decimal point: any position e if the ust ent of the e ice shou n t irect ccessi e for the user
Accuracy: < 0.2% FS ±1digit (at nominal temperature = 25°C) - M12 design type with two M12-connections upon request
Measuring rate: > 50 measurements / sec.
Filter: selectable in 3 stages
Limit: 3 limit functions selectable:
LI 0: Values above/below range permissible
LI 1: Values above/below range not permissible GRA 0420 WK
LI 2: When range is exceeded, the refering rail will be displayed ithout u i i r ener , out ut 0 , e ectric iso te switchin out ut
Switching outputs:
GRA 010 WK
Alarm / Protection
GRA0420VO, 1 electrically isolated open collector output,

connection via cubic plug Output 0-10V, 1 electrically isolated switching output.
GRA010VO: 1 +Ub-switching open collector output,
connection via cubic plug Specification:
Option ... - S2: 2 electrically isolated open collector outputs, same as GRA ... VO, but
connection via separate M8 jack Electric connection: connection to any stand-
Switching point, switching hysteresis: freely adjustable ard signal source and switching output via 2 m
max. switching voltage: 28 V connection cable.
max. switching current: 20 m A (at option ... - S: 1 A) Housing with mounting holes can be mounted to
Reaction time: < 20 ms
pict. shows device any surface whatsoever.
with option
59
DIGITAL-PANEL-MOUNTED DISPLAY DIGITAL DISPLAY for all measuring
MODULES for all applications transducers to 20 mA 2-wire, no aux-
Handheld instrument
2 temperature modules (covering temperature ranges

from -50 up to 1150° C) iliary power required
pressure modules for barometer, vacuum meter, manometer
Digital panel module with-
for absolute pressure, over/under pressure and pressure differ-
ence measurements. Pressure range up to 10 bar out auxiliary energy
one voltmeter module with 3 integrated voltage ranges
Common specification for all modules: for use in to 20 mA
Display: 3 -digit LCD display, 13mm high (±1999 digit), scan rate: 3 output circuits of meas-
meas. per second, operating temperature: 0 to 50°C, atmospheric uring transducers
humidity: 0 to 85%RH (non-condensing), storage temperature: -10 to
+70°C, current supply: 9 - 12 V DC, electrical connection: via solder-
WITHOUT E TERNAL
ing pin, dimensions: 38 x 76 x 22 mm (H x W x D), panel-cutout: 36+0.5 x

73.2+0.5mm (H x W), panel thickness: max. up to 9.5mm. snap-on frame AU ILIARY SUPPLY
protruding only 1mm over front plate - professional design, 3mm thick anti-
reflex screen
high operating reliability
TEMPERATURE
GPT 180 Cost reduction as pow-

TEMPERATURE MODULE for semiconductor sensor KTY 83-110 er supplies and their
Range: -50.0 up to +175.0° C / Resolution: 0.1° C cables are no longer
Accuracy: approx. 1% f.s. / Power consumption: approx. 1 mA
Suitable sensors KTY 83-110: please refer to pages 110
required
GPT 1155
Logger / EASYBus
TEMPERATURE MODULE for thermocouple NiCr-Ni (type K)

Range: -50 up to +1150° C / Resolution: 1° C
Accuracy: (at nominal temperature = 25°C) better than 1 % from -20 up to +550 GTA 0420 (standard range)
and from 920 up to 1150° C, 550 up to 920 better than 1.5% Large, high-contrast 3 1/2 digit LCD, 12.7 mm high; to either directly dis-
Power consumption: approx. 0.35 mA play loop current or convert it into any desired value such as temperature,
Suitable sensors type NiCr-Ni (type K) p.r.t. pages 105 - 109, 114 - 115 pressure, fill level, humidity, travel, weight, height, liquid flow, ppm, mg/l,
GTU 300/152 wire sensor with soldering pin plug % sat., etc..
Snap-on, industrial panel-mounting type, anti-reflex screen 3 mm thick
Pressure (not to be compared with unprotected glass covered display as used with
cheap modules!)
GPD 15 ABS Minimum size: 38 x 76 x 22 mm (H x W x D). Devices can be stack-mounted
DIGITAL BAROMETER / VACUUM METER MODULE (sensor not included) at a distance of 38 mm.
Range: 0 to 1100 mbar (hPa) absolute / Resolution: 1 mbar Standard printings available, eg. °C, %, V, mbar, bar, otherwise neutral.
Accuracy module: 1 mbar ±1 digit Specification:
Accuracy sensor: (sensor not included in scope of supply):
Input signal: 4 .. 20 mA, 2-wire
Transmitter
±0.2% (typical) for linearity and hysteresis, ±0.4% for temperature drift from
Display ranges: 0,0 ... 100,0; 0,0 ... 199,9; -50,0 ... +50,0 (standard);
0 to 50° C (typ. values for sensors compensated to module)
any display range desired against upcharge (p.r.t. options)
Power consumption (incl. sensor) approx. 3.5 mA
Decimal point: any place (soldering jumper)
Suitable sensors: (please order separately)
Fine tuning: starting point at 4 mA and end point at 20 mA can each be
SC 15 ANC (pressure sensor, loose)
shifted by ±50 digits
SC 15 ANC/G (pressure sensor with housing, 1m connection cable)
Display: 3 digit LCD with ±1999 digits, 13 mm high
GPD 05 REL Scanning rate: 3 measurements per second
Voltage load: approx. 4,7 V (standard - connection wrong-polarity protected)
DIGITAL MANOMETER for over/under pressure and pressure differ-
optional: approx. 3,5 V (without polarity protection) - upon request
ence (sensor not included)
Meas. range: -100,0 to +199,9 mbar relative (referring to ambient pressure) Accuracy: (at nominal temperature = 25°C) ±0.1% ±1digit
Temperature coefficient:100 ppm / K
Temperature probe
Resolution 0,1 mbar / Accuracy module 0,1 mbar ±1 digit

Accuracy sensor and power consumption as above Operating temperature: 0 to 50 °C
Suitable sensors: (please order separately) Atmospheric humidity: 0 to 85 %RH (non-condensing)
SC 05 DNC (pressure sensor, loose) Storage temperature: -10 to +70°C
SC 05 DNC/G (pressure sensor with housing, 1m connection cable) Dimensions: 38 x 76 x 22 mm (H x W x D)
Panel cutout: 36+0.5 x 73.2+0.5 mm (H x W)
GPD 30 REL Panel thickness: max. up to 9.5mm.
DIGITAL MANOMETER for over/under pressure and pressure differ- Options:
ence (sensor not included)
Any measuring range desired (against upcharge)
Meas. range: -1000 to +1999 mbar relative (referring to ambient pressure)
(no upcharge for orders as of 10 pieces of the same range)
Resolution 1 mbar / Accuracy module 1 mbar ±1 digit
Accuracy sensor and power consumption as above Further displays without auxiliary supply: p.r.t. page 44, 58, 59
Suitable sensors: (please order separately)
SC 30 DNC (pressure sensor, loose)
Alarm / Protection
SC 30 DNC/G (pressure sensor with housing, 1m connection cable) VOLTAGE
GPD 150 REL GPV 220

DIGITAL MANOMETER for over/under pressure and pressure differ- DIGITAL VOLTMETER, 3 integrated voltage ranges - others can be realised
ence (sensor not included) by means of an external voltage divider (eg for mains voltage 230 V etc.)
Range: -1.00 up to 10.00 bar relative (referring to ambient pressure) Ranges: ±199.9 mV DC, ±1999 mV DC, ±19.99 V DC integrated;
Resolution 0.01 bar Accuracy module 1 mbar ±1 digit (±199.9 V DC or 1999 V DC can be realised by means of an external voltage divider)
Accuracy sensor and power consumption as above Decimal point: any place selectable
Suitable sensors: (please order separately) Resolution: up to 100µV / Input impedance: 100MΩ resp. 1MΩ
SC 150 DNC (pressure sensor, loose) Accuracy: 0.1% ±1 digit / T.C. value: 100 ppm/K
SC 150 DNC/G (pressure sensor with housing, 1m connection cable) Power consumption: approx. 100µA only (approx. 3000 hours with normal 9V-battery)
60
The innovation in pressure measurement
USB Data Logger
GDUSB 1000 with Display for
Handheld instrument
external Thermocouples ( , K und T) or
universal USB interface adapter for GMSD Humidity / Temperature and Dew Point
pressure sensors
• Direct connection to USB
• large variety of pressure sensors interface
(range 2.5 mbar ... 1000 bar) W
NE • 2 programmable alarm
• 1000 measurments per second limits
• real pressure peaks registration • LED for indication of low
• comfortable display of the pres- battery power
sure developing on the PC • Data logger with display
• no external power supply needed • red, green and orange
LED for system status
GDUSB 1000 (device software)
(for suitable probe please refer to pages 22/23) • IP67
Application areas: • incl. software
• long term monitoring of pressure
•
•
registration of pressure peaks (i.e. at switching operations)
monitoring of pressure developing (i.e. in process technology)
EL-USB-2-LCD (device software)
USB Data Logger for Humidity / Temperature and Dew Point
Logger / EASYBus
• checking of working pressure developing in mechanical and plant engineering
General function description: EL-USB-TC-LCD (device software)

The GDUS1000 adapter allows the direct connection of a standard pressure USB Data Logger for external Thermocouples ( , K und T)
sensor of the type GMSD/MSD to the USB interface of a PC. The adapter
provides 4 channels: current measured value, average value, Max. and
Specification EL-USB-2-LCD:
Min. peak, there are also two modes for the measurement available:
Measuring Range Temperature: -35 ... +80°C
Fast-mode: (autom. sending)
Humidty: 0 ... 100% r.h
At this mode the GDUS 1000 sends automatically the measured values Dew Point via Software
at adjustable intervals after a trigger condition has occurred. Resolution: 0,5 °C / 0,5% r.h.
This mode is suitable for the analysis of pressure developments, record- Accuracy Temperature (typ): ± 1°C
ing of pressure peaks (with pre-trigger) etc. Humidty: ± 3,5 %r.F. (in the range 20 till 80 %r.h.)
The device is handled by the comfortable software GSOFT USB, which Dew Point: ± 2°C (in the range 40...100%r.h., 25°C)
has for example the following functions, i.e.: different trigger conditions Memory: 16.382 recordings per humidity and temperature
Transmitter
for the recording start, analyse and archive the pressure developing. ,etc. Logging Interval: 10 sec, 1 min, 5 min, 30 min, 1 h, 6 h, 12 h
programmable via software
Serial Interface: USB
Battery: 3,6V lithium battery, size 1/2 AA, exchangeable
Dimensions: 103 x 26,4 mm (L W), Ø 27,0mm
Scope of supply: 1 device, 1 lithium battery 3,6V, 1 software, 1 clip
1 protection cap, 1 operating manual (on CD-ROM),
1 clip
Specification EL-USB-TC-LCD:
Temperature probe
Measuring Range: Typ J: -130 ... +900°C, Typ K: -200 ... +1300°C
Typ T: -200 ... +350°C
Standard-mode: (master-slave)
Resolution: 0,5°C
At this mode the GDUS1000 behaves like a handheld instrument of the Accuracy (typ.): ± 1,0°C 25°C
GMH3xxx series and sends the measured value on demand. Thermocouple Connectors : Thermoelement socket in miniature size,
The communication can be done via software EBS 20M (p.r.t. p. 41).This suitable for flat-pin plugs
mode provides i.e. the opportunity of long term monitoring of pressure. Memory: 32.000 data
Logging Interval: 1 sec, 10 sec, 1 min, 5 min, 30 min, 1 h, 6 h, 12 h
Specification: (GDUSB1000)
adjustable via software
Measuring range: corresponding to connected probe
max. range: -19999 ... +19999 Digit Operating Temp. Range: -10 ... +40°C
Pressure units: mbar, bar, Pa, kPa, MPa, mmHg, PSI, mH2O, Serial Interface: USB
switchable, according to the used sensor Battery: 3,6V Lithium battery, size ½AA
Sampling rate: 1000 measurings / sec. (= 1 ms) Battery Life Time: 6 month 25°C and recording intervall 1 min
Alarm / Protection
Accuracy: ±0.2 % FS (at nominal temperature = 25°C) Dimensions: 118,2 x 26,8 mm (L W), Ø 27,0mm
Recording interval: 1 ms (at fast-mode) to 10 s Scope of supply: 1 device incl. 3,6V lithium battery, 1 software,
via software adjustable 1 protection cap, 1 operating manual (on CD-ROM),
Connections: 1 clip, 1 wire temperature probe
PC: Standard USB plug (type A)
GMSD/GMXD: 6-pin screened Mini-DIN jack with bolting.
Power supply: via USB interface Special Note:
Dimensions: 56 x 31 x 24 mm, Cable length (USB): 30 cm EL-USB-2-LCD and EL-USB-TC-LCE are neither BUS- nor EASYBUS
compatible.
System requirements software: CPU with 1GHz, 256 MB RAM
The software is executable with: Windows 98SE, 2000, P, Vista and 7.
61
T-Logg - The logger series for stand-alone applications
Handheld instrument
TEMPERAT RE-LOGGER STANDARD SIGNAL LOGGER H MIDITY-/TEMPERAT RE-LOGGER

for individual programming of for individual programming of for individual programming of
recording time recording time recording time
T-Logg 100 T-Logg 120 W
T-Logg 100 E T-Logg 120 K
TEMPERAT RE-REGISTRATION STANDARD SIGNAL REGISTRATION H MIDITY- / TEMPERAT RE-REGISTRATION

(16.000 meas. values) for any application (16.000 meas. values) for transducers etc. (16.000 meas. values) for any application
T-Logg 100 T-Logg 120 W - ... T-Logg 1 0

(with elbow type plug)
T-Logg 100 E Starter kit
T-Logg 120 K - ...
Logger / EASYBus
Starter kit (with PG glanding and cable) T-Logg 1 0 SET

Complete set with T-Logg 100 and interface
T-Logg 100 SET ote please specify standard signal desired
hen ordering i.e. T- ogg 1 - -1 converter USB 100 (incl. MINISOFT)
Complete set: T-Logg 100 + USB 100 (incl. MINISOFT)

Measuring range: Display range: -1999 ... 9999 digit Measuring ranges display ranges:
T-Logg 100: -25,0 ... 60,0 °C freely programmable Humidity: 0.0 ... 100.0 %RH
T-Logg 100 E: -25,0 ... 120,0 °C Decimal point any position Temperature: -25.0 ... 60.0 °C
Resolution: 0,1 °C Input signal: only one signal! Resolution: 0.1 °C / 0.1 %RH
Accuracy (at nominal temperature = 25°C): 0 - 1 V, 0 - 2 V, 0 - 10 V, 0 - 20 mA or 4 - 20 mA Accuracy (at nominal temperature = 25°C):
T-Logg 100: ±0,5 °C other input signals upon request Humidity: < ±3 % in range 10 - 90 %
T-Logg 100 E: ±0.2 % of meas. value ±0.5 °C (input is not isolated from interface) Temperature: ± 0,3 °C ± 0.017 * (T - 25°C)
Sensor: Accuracy: ±0,5 % FS (at nom. temperature) Sensors: mounted in sensor tube
Transmitter
T-Logg 100: integrated in device Display : 10 mm high LCD-display Sensor tube: approx. Ø15 mm made of
T-Logg 100 E: sensor tube made of stain- Recording interval: from 2 sec. to 5 h polyamide with screw-type
less steel, Ø5 mm, approx. freely programmable via software plastic protection cap
50 mm long, approx. 1 m Storage capacity: 16.000 measuring values Display: 10 mm high LCD-display
silicone cable. Cable with anti-
Recording time: 166 days Recording interval: from 4 sec. to 5 h
buckling glanding to housing. freely programmable via software
(if interval is 15 min.)
Display: LCD-display, 10 mm high Storage capacity: 16.000 measuring values each
Working temperature: -25 to +60 °C
Recording interval: from 2 sec. to 5 h Recording time: 166 days
free programmable via software Storage temperature: -30 to +85 °C
Battery: CR2032, exchangeable (if interval is 15 min.)
Storage capacity: 16.000 measuring values Nominal temperature: 25 °C
Recording time: 166 days (if interval is 15 min.) Battery service life: over 3 years
Temperature probe
(if recording interval is 15 min.) Working temperature: -25 to +60 °C

Working temperature: -25 to +60 °C Storage temperature: -30 to +85 °C
Electric connection: (for input signals)
Storage temperature: -30 to +85 °C Battery: CR2032, exchangeable
... 120 W - ..: elbow-plug in accordance with
Battery: CR2032, exchangeable DIN43650 for connection to an Battery service life: over 3 years
Battery service life: over 3 years existing transmitter. (if recording interval is 15 min.)
(if recording interval is 15 min.) ... 120 K - ..: approx. 0.5 m connection cable
Interface: serial interface, 3-pin miniature integral plug.
he T- ogg 1 is not suitable for bus operation and is not E.A.S.Y.Bus compatibel!
Housing: 48,5 x 48,5 x 35,5 mm (H x W x D). plugs, sensor connection, ... are not included
Housing made of shock resistant plastic, transparent front made of polycarbonate, splash water-proof: IP 65 (excl. protection cap at T-Logg 160).
Noise immunity (EMC): the T-Logg 100 have been manufactured in accordance with the regulations concerning EMC (2004/108/EG).
The device meets EN61326 (appendix A, class B), additional error: < 0,5% (< 1% at T-Logg 100 E)
Alarm / Protection
Software Accessories
MINISO T free of charge SB 100 interface converter,
Read-out software for the T-Logg. for direct connection of one T-Logg to the USB-interface of a PC.
Software is contained at the USB 100 or free GWH 0K Wall suspension with lock against theft (picture: see page 66)
available via the internet (www.greisinger.de). suitable for e.g. T-Logg 100, T-Logg 120 K - ... and T-Logg 160.
We will be pleased to send you a separate CD
against a small charge covering our expenses GWH 10 Simple wall suspension, made of stainless steel (picture: see page 66)
of € 15,40. Mount wall suspension at the monitoring point, logger may now be easily put in.
ote the T- ogg can also be controlled CR 2032 spare battery for T-logg´s
by the software F 40 .
2
TEMPERATURE LOGGER PULSE-LOGGER
for watching productioning and server-rooms as well as cooling chambers for consumption and flow rate measur-
Handheld instrument
according assignation of frozen food 92/1/EWG ing, piece counting etc.
s
.Bu .Bu
s
.S.Y .S.Y
E.A Modul E.A Modul .Bu
s
- .S.Y
- E.A Modul
-
EASYLOG 40K EASYLOG 40KH
TEMPERATURE REGISTRATION (48.000 meas. values) for any application. PULSE REGISTRATION
(48000 meas. values) for individual use
EASYLOG 40K sensor tube are attached on the device
EASYLOG 40KH sensor tube are connected via 1 m cable EASYLOG 40IMP/S
(type switching contact - with PG-glanding and cable)
EASYLOG 40KH-E300 tube con. via cable, increased meas. range (0,1°C)
EASYLOG 40IMP/T
EASYLOG 40KH-E600 tube con. via cable, increased meas. range (1°C) (type TTL-signal - with PG-glanding and cable)
EASYLOG 40KH-GOF with surface probe for pipe mounting
Logger / EASYBus
Specification
WPT3 - Certificate of calibration (not available at ..40KH-GOF) Measuring range: 0 ... 30000 pulses/cycle
(measuring points: -20°C / 0°C / +60°C (at ..40K) or -20°C / 0°C / +70°C (at ..40KH)) Resolution: 1 pulse
Cycle: 2 sec. to 5 h,
Specification free programmable via
Measuring ranges: Display: 10 mm high LCD-display software F 40
EASYLOG 40K: -25.0 ... 60.0 °C Recording interval: 2 sec. to 5 h Display range: -1999 to 9999 Digit
EASYLOG 40KH: -50.0 ... 150.0 °C free programmable via software F 40 free programmable
EASYLOG 40KH-E300: -50.0 ... 300.0 °C Storage capacity: 48.000 measuring values Decimal point: any position
EASYLOG 40KH-E600: 0 ... 600 °C Recording time: 500 days, Input signals:
EASYLOG 40KH-GOF: -50.0 ... 150.0 °C (if recording interval is 15 min.) EASYLOG 40IMP/S: passive volt-free switching
For special measuring ranges refer to options contact
Battery service life: approx. 6 years (at 15 min)
Working range (electronic): -25 ... 60°C
double battery capacity against upcharge available! EASYLOG 40IMP/T: active TTL-signal
Resolution display and memory: (input is not isolated for us)
Working temperature (electronic): -25 to +60 °C
Transmitter
0.1°C or 1°C (corresponding type) Resolution display and memory: 1 digit
Accuracy (at nominal temperature = 25°C): Storage temperature: -30 to +70 °C
Interface: EASYBus-interface Accuracy: cycle time ±50 msec
EASYLOG 40K: ±0.5°C
3-pin mini-integral plug. Display: 10 mm high LCD-display
EASYLOG 40KH: ±0.5°C
EASYLOG 40KH-E300: ±0.5°C ±0.2% of m.v. Needed connection-cable EBSK01 not included Recording interval: equal to cycle
EASYLOG 40KH-E600: ±1°C ±0.2% of m.v. in delivery (see accessories page 76) Storage capacity: 48.000 measuring values
EASYLOG 40KH-GOF: ±0.5°C ±0.2% of m.v. ote ith an according interface converter Recording time: 500 days,
you can connect 1 0 logger without having any (if recording interval is 15 min.)
Sensor: Pt1000 (2-wire)
problems.
- Design 0K: (refer upper picture) Battery service life: approx. 6 years (without
Housing: 48,5 x 48,5 x 35,5 mm (W x W x D) switching current, at 15 min)
sensor tube made of plastic, Ø7 mm, approx.
30 mm long, attached on the device. sensor and plug not included, IP65. double battery capacity against upcharge available!
Noise immunity (EMC): the EASYLOG have
Temperature probe
( ote at certificate: stainless steel tube, Working temperature: -25 to +60°C

Ø5 mm, approx. 60 mm long) been manufactured in accordance with the regu-
- Design 0KH: (refer upper picture) lations concerning EMC (2004/108/EG).
The device meets EN50081-1 and EN50082-1 Interface: EASYBus-interface
sensor tube made of stainless steel, Ø5 mm,
additional error: < 0,5% 3-pin mini-integral plug.
approx. 50 mm long, approx. 1 m silicone cable.
Cable with anti-buckling glanding to housing. Needed connection-cable EBSK01 not included
Options (for extra charge) in delivery (see accessories page 76)
- Design 0KH-E300: (probe picture below)
- DBK: double battery capacity Housing: 48,5 x 48,5 x 35,5 mm (L x B x H)
recommended for high measure-rates plug and cable not included, IP65
sensor tube made of stainless steel, Ø3 mm,
approx. 100 mm long, sleeve Ø5 x 50 mm, Electric connection: (for input signals)
- ALARM: additional alarm-output approx.. 0.5m connection cable, flying leads
approx. 1 m glass silk cable. Cable with anti- open-collector output via 4-pole miniature
buckling glanding to housing. mounting connector (IP65) including 1 m cable. Noise immunity (EMC): the EASYLOG have
- Design 0KH-E600: (probe picture below) Max. switching power: 28 V, 50 mA been manufactured in accordance with the regu-
lations concerning EMC (2004/108/EG).
Alarm / Protection
- AFK: plugable probe-cable The device meets EN50081-1 and EN50082-1

sensor tube made of stainless steel, Ø3 mm, 4-pole (IP65) miniature mounting connector additional error: < 0,5%
approx. 100 mm long, sleeve Ø5 x 50 mm, flex- including assembling of the temperature-probe
ible coating-element, approx. 1 m silicone cable. to the corresponding connection socket
Cable with anti-buckling glanding to housing. Options (for extra charge)
- Design 0KH-GOF: (without picture) - SMB: extra measuring range
self-adhesive surface temperature probe with freely selectable between -200...+600°C. - DBK: double battery capacity
moulded silicone design (type GOF 115 Pt1000 The essential probe-adjustment is not included recommended for high measure-rates
- please refer to page 115) in this price.
- ALARM: additional alarm-output
approx. 2 m PFA-insulated cable. Cable with Note: at a measuring span <400°C (e.g. ±
open-collector output via 4-pole miniature
anti-buckling glanding to housing. 200°C) a resolution of 0,1°C is possible. Taller
mounting connector (IP65) including 1m cable.
- Special design types upon request ranges have a resolution of 1°C
Max. switching power: 28V, 50mA
63
HUMIDITY-/TEMPERATURE-LOGGER STANDARD SIGNAL LOGGER
for museums, greenhouses, medicine technology etc. replaces for expensive recorders
Handheld instrument
s
.Bu
.Bu
s
.Bu
s .S.Y
.S.Y .S.Y E.A Modul
E.A Modul E.A Modul -
- -
EASYLOG 40NS W
EASYLOG 24RFT EASYLOG 24RFT-E

HUMIDITY- / TEMPERATURE-REGISTRATION STANDARD SIGNAL REGISTRATION
(48.000 measuring values each) for climate monitoring. (48.000 meas. values) for transducers etc.
EASYLOG 24RFT EASYLOG 40NS W - ...
(with elbow type plug)
EASYLOG 24RFT-E
WPF4 - Certificate of calibration humidity (measuring points: approx. 20/40/60/80%)
EASYLOG 40NS K - ...
(with PG glanding and cable)
Specification ote please specify standard signal desired

hen ordering
Logger / EASYBus
Measuring range, Display ranges: Housing: 48,5 x 48,5 x 35,5 mm (H x W x D)

Humidity: 0,0 ... 100,0 %RH sensor and plug not included. Specification
Temperature: -25,0 ... 60,0 °C Housing made of shock resistant Display range: -1999 to 9999 Digit
Display-Options: plastic, transparent front made of free programmable
lternative display will shown instead of humid- polycarbonate, splash water-proof:
IP 65 (excl. protection cap) Decimal point: any position
ity measuring value. Input signals: one signal only!
FK: Wet bulb temperature: -27,0 ... 60,0 °C Noise immunity (EMC): the EASYLOG have
been manufactured in accordance with the regu- 0 - 2 V, 0 - 10 V, 0 - 20 mA or 4 - 20 mA
TP: Dewpoint temperature: -40,0 ... 60,0 °C other input signals upon request
EP: Enthalpy: -25,0 ... 999,9 kJ/kg lations concerning EMC (2004/108/EG).
The device meets EN50081-1 and EN50082-1 (input is not isolated for us)
FG: Atmospheric humidity: -0,0 ... 640,0 g/kg
additional error: < 0,5% Accuracy: ±0,5% (at nom. temperature)
Resolution display and memory:
Display: 10 mm high LCD-display
0.1 °C and 0,1 %RH or 1 digit Options (for extra charge)
Recording interval: 2 sec. to 5 h
Accuracy (at nominal temperature = 25°C):
- FK: Wet bulb temperature free programmable via software F 40
Humidity: < ±3 % in range 11-90%
- TP: Dewpoint temperature Storage capacity: 48.000 measuring values
Temperature: ±0,5°C
Transmitter
Recording time: 500 days,

Sensors: high-quality capacitive - EP: Enthalpy (if recording interval is 15 min.)
polymer humidity sensor - FG: Atmospheric humidity
and Pt1000 temperature Battery service life: approx. 6 years (at 15 min)
sensor - DBK: double battery capacity double battery capacity against upcharge available!
recommended for high measure-rates Working temperature: -25 to +60°C
Sensor tube:
EASYLOG 2 RFT: Ø15mm made of polyamide - ALARM: additional alarm-output
EASYLOG 2 RFT-E: approx. Ø14 x 68mm made open-collector output via 4-pole miniature Interface: EASYBus-interface
of PVDF, connected to mounting connector (IP65) including 1m cable. 3-pin mini-integral plug.
logger via 1m teflon cable Max. switching power: 28V, 50mA Needed connection-cable EBSK01 not included
in delivery (see accessories page 78)
Protection cap: screw-type plastic
Accessories (p.r.t. page 76, 78/79) Housing: 48,5 x 48,5 x 35,5 mm (L x B x H)
protection cap for quick
Temperature probe
(with elbow-plug: 48,5 x 48,5 x 35,5 mm),

responses
EBW 1 splash water-proof IP65
Display: LCD-display, 10 mm high Level converter for connection of up to 9 EASY- Electric connection: (for input signals)
Recording interval: 4 sec. to 5 h Bus data logger to the RS232-interface of a PC. ... 40NS W: elbow-plug in accordance with
free programmable via software F 40 (Power supply: 230V/50Hz) DIN43650 for connection to an
Storage capacity: 48.000 measuring values EBW 3 existing transmitter.
each channel Level converter for connection of one EASYBus ... 40NS K: approx. 0.5 m connection cable
Recording time: 500 days, data logger to the USB-interface of a PC. Noise immunity (EMC): the EASYLOG have
(if recording interval is 15 min.) (Power supply: via USB) been manufactured in accordance with the regu-
Battery service life: approx. 6 years (at 15 min) GSOFT 0K incl. EBSK01 lations concerning EMC (2004/108/EG).
double battery capacity against upcharge available! (connection cable EBSK01in scope of supply) The device meets EN50081-1 and EN50082-1
Working temperature: -25 to +60°C Windows software for setting of device, data additional error: < 0,5%
Storage temperature: -30 to +70°C readout and printing of the stored data.
Alarm / Protection
(for further description p.r.t. page 67) Options (for extra charge)
Interface: EASYBus-interface
3-pin mini-integral plug. EBSK 01
Special connector with approx. 1m cable for the - DBK: double battery capacity
Needed connection-cable EBSK01 not included
connection of one EASYLOG. recommended for high measure-rates
ote ith an according interface converter (note cable is in scope of supply of the software - ALARM: additional alarm-output
you can connect 1 0 logger without having any F 40 ) open-collector output via 4-pole miniature
problems. mounting connector (IP65) including 1m cable.
Max. switching power: 28V, 50mA
Attention: Our software GSOFT 0K as well as a level converter (EBW1, EBW3, EBW6 or EB2000MC)
are required for all EASYLOG devices for configuration and to read-out logger data. (p.r.t. p. 67 a. 76)
6
STATE-LOGGER HUMIDITY-/TEMPERATURE-/AIR PRESSURE LOGGER
for state monitoring etc. for climate monitoring etc.
Handheld instrument
The new generation of the logger series
s
.Bu
.S.Y
E.A Modul ● double display (i.e. to display humidity and
s -
.Bu
.S.Y temperature at the same time)
E.A Modul
-
● up to 64 recording sequences can be saved
● big storage for up to 250.000 measuring
values for each unit (humidity, temperature,
air pressure, ...) (= 1.000.000 values for all)
● Various additional measurement categories
are available: dew point temperature, wet
bulb temperature, enthalpy, atmospheric
humidity or absolute humidity
STATE REGISTRATION HUMIDITY - / TEMPERATURE - / PRESSURE - REGISTRATION
(48000 meas. values) for individual use (each 250.000 measured values) for climatic applications.
EASYLOG 40BIN EASYLOG 80CL

WPF4 - Certificate of calibration humidity (measuring points: approx. 20/40/60/80%)
WPD5 - Certificate of calibration pressure (measuring points 300/500/700/900/1100 hPa)
Specification General
Input signal: passive volt-free switching The EASYLOG 80CL can be configured, started and stopped by its buttons. It is possible to record
Logger / EASYBus
contact max. 64 recording sequences (=start/stop processes) with max. 250.000 data sets (humidity/tem-
(input is not isolated for us) perature/air pressure).
The device can also be configured and handled by the comfortable software GSOFT40K. There is
Measuring values:
the possibility to block the stopping of the logger by the buttons to protect the logger of unauthor-
1 = contact is closed (R < 50 Ohm) ised handling.
0 = contact is open (R > 20 kOhm)
The device supports the display of units relevant for the air conditioning technology: wet bulb tem-
Cycle: 2 sec. to 5 h, perature, dew point temperature, enthalpy, atmospheric humidity or absolute humidity.
free programmable via
The EASYLOG 80CL provides a big variety of additional functions:
software F 40
- SeaLevel correction: instead of the barometric air pressure the pressure at sea level can be display
Resolution display and memory: 1 digit (input of height above sea level needed).
Display: 10 mm high LCD-display - Min-/max- value memory: callable by the buttons, the highest and lowest value since the start (or reset) of
Recording interval: equal to cycle the logger is saved here.
Storage capacity: 48.000 measuring values - Min-/max- alarm function: the exceeding of adjustable min-/max- alarm boundaries by the displayed value
is monitored. Optional: alarm output for alarm message of the logger available!
Recording time: 500 days,
(if recording interval is 15 min.) Specification
Transmitter
Battery service life: approx. 6 years (without Measuring range, Display ranges: Recording time: 7 years (at 15 min. interval)
switching current, at 15 min) Humidity: 0,0 ... 100,0 %RH Battery service life: approx. 5 years (at 15 min)
double battery capacity against upcharge available!
Temperature: -25,0 ... +60,0 °C Working temperature: -25 to +60°C
Working temperature: -25 to +60°C Air pressure: 300,0 ... 1100,0 hPa Storage temperature: -30 to +70°C
Storage temperature: -30 to +70°C Additional available display ranges:
Interface: EASYBus-interface Interface: EASYBus-interface
Wet bulb temperature: -27,0 ... 60,0 °C 3-pin mini-integral plug.
3-pin mini-integral plug. Dewpoint temperature: -40,0 ... 60,0 °C
Needed connection-cable EBSK01 not included Needed connection-cable EBSK01 not included
Enthalpy: -25,0 ... 999,9 kJ/kg in delivery (see accessories page 78)
Atmospheric humidity: -0,0 ... 640,0 g/kg ote ith an according interface converter
ote ith an according interface converter
Absolute humidity: 0,0 ... 200,0 g/cm you can connect 60 logger without having any
you can connect 1 0 logger without having any
Temperature probe
Resolution display and memory: problems.

problems.
0.1 °C, 0,1 %RH and 0,1 hPa or 1 digit Housing: 48,5 x 48,5 x 35,5 mm (H x W x D)
Housing: 48,5 x 48,5 x 35,5 mm (L x B x H)
Accuracy: sensor and plug not included.
plug and cable not included, IP65
Humidity: ± 2 % in range 10-90% Housing made of shock resistant
Electric connection: (for input signals) plastic, transparent front made of
Temperature: ± 0,3 °C ± 0.017 * (T - 25°C)
approx.. 0.5m connection cable, flying leads polycarbonate, splash water-proof:
Air pressure: ± 1.0 hPa (typ., at 0 - 60°C)
Noise immunity (EMC): the EASYLOG have IP 65 (excl. protection cap)
been manufactured in accordance with the regu- Sensoren:
Noise immunity (EMC): the EASYLOG have
lations concerning EMC (2004/108/EG). Humidity/Temp.: sensor mounted in sensor tube
been manufactured in accordance with the regu-
The device meets EN50081-1 and EN50082-1 (sensor is exchangeable)
lations concerning EMC (2004/108/EG).
additional error: < 0,5% Air pressure: sensor integrated in housing The device meets EN61326 (appendix A, class B)
Sensor tube: Ø15 mm made of polyamide additional error: < 0,5%
Protection cap: screw-type plastic protection
cap for quick responses
Alarm / Protection
Options (for extra charge) Options (for extra charge)

Display: two 4½-digit LC-displays
- DBK: double battery capacity - ALARM: additional alarm-output
Recording interval: 4 sec. to 5 h open-collector output via 4-pole miniature
recommended for high measure-rates
free programmable via buttons on the device or mounting connector (IP65) including 1m cable.
- ALARM: additional alarm-output via the software F 40 Max. switching power: 28V, 50mA
open-collector output via 4-pole miniature Storage capacity: 250.000 data sets (humidity,
mounting connector (IP65) including 1m cable. temperature, air pressure)
Max. switching power: 28V, 50mA in max. 64 recording sequences
Please Note: For trademark reasons we currently do not deliver members of the EASYLOG family to GB
and USA. Please order there the constructional identical types: Logger type 0K, Logger type 0RF, ...
65
EASYLOG - accessories
Handheld instrument
ESK-1 external starting key, independent from mains supply

to start logger of the type EASYLOG 40... and EASYLOG 24... in the start mode St.Et
Power supply: 9 V DC - via integrated 9V-battery,
Dimensions: 107 x 62 x 26,5 mm (H x W x D)
GWH 0K wall suspension with lock as protection against theft

suitable for all EASYLOG (with the exception of EASYLOG 40NS W), EBN/K - ...,
and also for GIA 0420 WK and GRA 0420 WK.
Scope of supply: Mounting plate with nut for instrument mounting,
2 screws, 2 dowel, lock with keys
GWH 10 simple wall suspension, made of stainless steel,

for all EASYLOG (except EASYLOG 40NS W).
mount wall suspension at the monitoring point, the logger may now be easily put in.
Scope of supply: wall suspension
EBW 1 EASYBus - interface converter, RS232 p.r.t. page
EBW 3 EASYBus - interface converter, USB p.r.t. page
GSOFT 0K Windows software for handling the EASYLOG (incl. EBSK 01) p.r.t. page
EBSK 01 Special plug with approx. 1 m cable for connection of a EASYLOG, EBN.. to the EASYBus
Logger / EASYBus
EASYBus - Remote Operation System for dataloggers

By using the software GSOFT 40K in addtion to the local control of loggers connected at Your work place or laptop computer, they can
be operated remotely covering large distances. This is made possible by using MODEMs and conventional or mobile telephone nets. The
loggers can be directly connected to the EASYBus-MODEMs just by using a level converter, no additional PC is needed!
Your advantages
With the EASYBus remote operation system any number of remote locations can be controlled from a single working place. Expen-
sive journeys over hundreds of kilometres aren t necessary any more for the most of the cases, all necessary information is available
Transmitter
directly at the working place. Installation and putting into operation is as easy as possible. The operation of GSOFT 40K is basically
the same as it used to be before. The comfortable configuration software MODKonfig (in scope of supply of GSOFT 40K) gives a
maximum help when setting up your industry MODEM - without necessary previous knowledge about remote data transfer. With this
powerful tools You are enabled to setup the complete reliable system within minutes.
Simple Installation: Extended system with SMS alarm function:

Alarm by SMS
message
Temperature probe
ne
one li
ne
eph one li
tel
teleph
Extended system with SMS alarm function

As a special feature an alarm message may be sent to your mobile phone (SMS) when using e.g. an EB2000MC / EB3000 or an
EBUW232A with a interface converter (EBW1, EBW64 oder EBW240). (MODEM 2500 or MODEM 3500 GSM required for SMS).
For example an alarm message is sent if a selectable temperature range is exceeded.
One or more alarm outputs of the used components are connected to the alarm input of the MODEM.
In case of an alarm the presetable alarm message is sent as SMS message to the mobile phone. When then message was received
Alarm / Protection
the operator may e.g. connect to the remote location by using GSOFT 40K to take a closer look on what is going on.
Required Components (p.r.t. page 79):

- For the working place commonly analog MODEMs will be supported, which also may be connected to ISDN nets via a suitable
terminal adapter.
- The MODEM of the remote location is a EASYBus - taylored industry MODEM (MODEM 2500, MODEM 3500 GSM).
- If there isn t any telephone connection available at the remote location, or if it is a mobile system, it is possible to use the mobile
GSM-MODEM. The MODEM 3500 GSM e.g. supports 900MHz mobile telephone nets and is approved for european use. It works
like a mobile phone with integrated MODEM. Common SIM cards are supported. It just to be made sure that data transfer is un-
locked by the mobile net provider.
GSOFT 0K (incl. connection cable EBSK01)
Handheld instrument
Operating software for EASYLOG and T-Logg datalogger
GSOFT40K is the comfortable operation software for the very easy operation of the EASYLOG s and T-Logg´s.
The software supports English, German and Czech language and is executable with Windows 98, Me, NT, 2000, XP, Vista and 7.
Comfortable user interface - the essentials on a glance:

The programme is menu driven, the most important commands are additionally available in a toolbar. Whenever necessary the soft-
ware gives hints and messages. Therefore any user with a few basics about how to operate standard Windows software will be able
to operate it. Loggers can be connected, started and read out by single mouseclicks.
Display of logger state informations
All necessary informations are compressed to a single
clearly arranged window for each connected logger.
Setting of special functions

The loggers are supporting alarm functionality - eas-
ily configurable by the GSOFT 40K Software. All other
important logger settings are displayed, too. E.g. a label
up to 16 characters long can be assigned to each log-
ger channel, which is stored in the logger. You may for
example label the location or other useful details by using
this function.
Additional entering of remarks
Logger / EASYBus
If You have read out a logger and want to store the data
on disk or harddisk there is the possibility to additionally
enter remarks of any length for each recording, for exam-
ple to describe and comment unusual occurrences during
the recording.
The data: Tables and diagrams

After reading out the recordings the data will be dis-
played in form of a table. With the diagram the data of
several loggers can be displayed simultaneously. Ad-
ditional diagram functions:
labelling of measuring values
real time axis
Transmitter
zooming of any section within the diagram
legend (inactivate able)
measurement cursor (inactivate able)
marking of measurings with symbols
(inactivate able)
The main target of the design of GSOFT40k was most
easiest operationability, therefore just a few easy mouse-
clicks are necessary to display data fast and clear. Both
diagrams and tables are displaying the data in realtime,
even daylight savings time settings are taken into ac-
Temperature probe
count automatically. And of course tables and diagrams

can be printed out.
E.A.S.Y.Bus simultaneous operation and display of several loggers

Because of the EASYBus more than one logger can be connected at the same time at a single serial PC interface. Distances of up
to 1000 m can be covered. To simplify operation all connected loggers can be operated at the same time. This reduces the expense
of operation time and even largest EASYBus-systems can be controlled easily.
Remote operation via conventional and mobile telephone nets

With GSOFT 40K loggers can be operated and read out via any distance by the means of the conventional or the mobile telephone
nets. Because of this feature measuring values and recordings can be collected centrally covering distances of hundreds of kilo
meters. (p.r.t. page 66 and 79)
Alarm / Protection
Automated Read Out

All loggers connected directly or via conventional an mobile telephone nets can be read out automatically. The points of time can be
entered separately (e.g. each day lor each week ... at X.XX o'clock), the read out data will be archived on hard disk.
The system gets even more reliable and the handling of multiple loggers gets much easter.
Export function
To be able to use the logger data with other software applications (EXCEL, WORD,... ), a flexible export function is integrated. The
data can be converted to textfiles which can be processed by all popular programmes.
Update GSOFT 40K (for registered users with declaration of serial number of original version)
pdate can do nloaded freely from our homepage prere uisite e istence version > .
67
E.A.S.Y.BUS
Handheld instrument
The EASYBUS system is based on the principle of the M-Bus (Meter Bus). The M-Bus is a stable data bus
system, designed and optimized in collaboration with significant industrial firms.
Advantages of EASYBUS
Minimal amount of planning

Economic display and monitoring system for several measuring

points as well as an optimum cost/performance ratio
High flexibility: Subsequent modification and extension is possible at
any time
Future-proof and modern technology on the basis of digital signal
transmission
Central data request over great distances
Typical scope of application

Logger / EASYBus
Cooling chambers / storage houses (temperature monitoring)

Heating systems / air condition and ventilation plants (temperature,
relative humidity, CO2 monitoring)
Utility rooms / plant rooms / computer rooms / laboratories
(temperature, relative humidity)
Museums and exhibition rooms (temperature, relative humidity)
Manufacturing rooms (temperature, relative humidity, CO2)
Storage rooms (temperature, humidity, dew point)
Greenhouses (temperature, humidity, CO2)
Transmitter
Parking garages (CO monitoring)
The system components

Numerous sensor modules available (with or without data logging)
Devices for centrali ed data collection (measuring, regulating and
displaying requested data)
Devices for decentrali ed data collection
Temperature probe
Level converter
PC incl. EASYBus software (data collection and data storage)
Further system components, e.g. for remote operation
Comprehensive range of accessories
Available EASYBus sensor modules

Temperature (Pt 100, Pt 1000, thermocouples)
Humidity / temperature / atmospheric pressure
(relative humidity, dew point temperature, absolute humidity, )
Alarm / Protection
Carbon dioxide (CO2)

Frequency, rotary speed, flow rate, state registration, …
Quantity (upward / downward counter)
Data loggers
Standardized signal modules for user-defined sensors
( 20 mA, 0 20 mA, 0 50 mV, 0 1 V, 0 2 V, 0 10 V)
68
Handheld instrument
Principle overview
Characteristics of the EASYBus system Temperature monitoring and

Low-cost wiring by using a twisted 2-pin con- regulation:
nection line in either bus or tree design (pola- Cooling chambers
Laboratory + utility rooms
rity-free) can be used in any combination
Storage rooms
Bus line for simultaneous power
supply and signal transmission
Bus length up to 1000 m, extensible by using a repeater
Fully automatic start-up installation via software
Relative humidity / dew point /
Sensor modules can be changed, removed temperature monitoring:
or added during operation at any time Storage rooms
Heating systems / air condition
Connection of up to 2 0 sensor modules
Museums / exhibition rooms Libraries
Optimum transmission reliability Laboratories / utility rooms
by means of CRC check
Bus system is able to process data up to
20 measuring values per second
Response time inside the EASYBus system ca. 1 sec.
but approx. 20 ms by using a local controlling system
Relative humidity / atmospheric
pressure,CO2 monitoring:
Manufacturing rooms / storage rooms
The EASYBus hardware Office rooms (to condition the air of
the room) Greenhouses
2-pin connection line, based on the
Logger / EASYBus
principle of the M-Bus
Polarity-free bus connection
Bus system voltage 36 V DC, minimum 2 V DC
Maximum allowable bus power loss: 12 V DC
Master/slave system CO monitoring:
data transmission of the slaves only on demand Underground garages / Parking garages
Motorcar garage / car repair
Indoor go-kart tracks
Zentrale Sensormodule mit Messwertspeicher

Schnittstellen-Konverter Sensormodule ohne Messwertspeicher
Datenerfassung (Logger-Funktion)
Transmitter
wachungsgerät (4 Grenzwerte),
ohne Schnittstellen-Konverter,
Anzeige- / Regel- und Über-
Schnittstellen-Konverter
EBW 1 für max. 9 Sensormodule Sensormodule Sensormodule
max. 20 Sensormodule
mit Logger-Funktion ohne Logger-Funktion

EBW 3 für 1 Sensormodul
Temperatur-Logger Temperatur-Modul
EBW 64 für max. 64 Sensormodule
Feuchte-/Temperatur-Logger Feuchte-/Temperatur-Modul
EBW 240 für max. 240 Sensormodule
Temperature probe
Klima-Logger
EB 3000 (Feuchte/Temp./Luftdruck) CO2-Modul
nach Wahl
Option
CO-Modul
EASYBus EASYBus
EBW …
entweder / oder
Normsignal-Logger
Druck-Sensor
Impuls-Logger
Variante mit EB 2000 + Normsignal-Modul
Schnittstellen-Konverter nicht erforderlich EB 2000

… Beliebiges Normsignal
Alarm / Protection
Max
Min
Zustands-Logger + Normsignal-Modul
gerät (mit Min- / Max-Relais-
Anzeige- und Überwachungs-
Konverter, max. 9 Sensormodule

ausgang), integrierter Schnittstellen-
Computer mit
PC Software
oder SPS (PLC) …
…
Direktabfrage-System Dezentrales Regelungssystem

Fernabfrage-System Für schnelle Regelungszeiten (ca. 20 ms) empfehlen wir
Alarmierung eine dezentrale Regelung innerhalb des EASYBus-Systems
(z. B. mit GIA 20 EB, GIR 2002…).
69
EASYBus - sensor modules for humidity/temperature
Handheld instrument
EBHT - 2R Specification
- VO: Option On-site display Measuring range:
Humidity: 0.0 ... 100.0 %RH
- HO: Option High-humidity sensor (0...100%) , incl. encapsulated PCB
recommended range (standard): 30 ... 80 %RH
- NI: Option selectable humidity display unit recommended range (option -HO): 5 ... 95 %RH
Temperature: -25,0 ... 70,0°C or -13,0 ... 158,0°F
Display options: refer to below
.Bu
s Resolution: 0,1 %RH or 0,1°C / 0,1°F
.S.Y
E.A Modul Accuracy: (at nominal temperature = 25°C)
-
Humidity: ±2.5 %RH (at recommended range)
00
00
Temperature: ±0.4 % of meas. value ±0.3°C

0
Electric connection: 2 pin screw-type terminal, no

polarity, max. 1,5mm2
Ambient temperature: -25...50°C
Housing: 70 x 70 x 26 mm (L x B x H)
00
0
Option Display: 10mm high LCD-display
EBHT - 1R (sensor tube at the side, FL = 50 mm) Specification

EBHT - 1K (sensor tube at the side, FL = 220 mm) Measuring range:
Humidity: 0.0 ... 100.0 %RH
EBHT - 2K (sensor tube pointing downwards, FL = 220 mm) recommended range (standard): 30 ... 80 %RH
Logger / EASYBus
- VO: Option On-site display recommended range (option -HO): 5 ... 95 %RH
Temperature: -40,0 ... 120,0°C or -40,0 ... 248,0°F
- HO: Option High-humidity sensor (0...100%)
Display options: with option an alternative
- NI: Option selectable humidity display unit display unit can be shown instead of the humidity
- LACK: Option Encapsulated PC-board measuring value. he unit selection will be done
via the interface or at the eyboard (by option ).
- L300 L400 L500: Option Longer probe tube
Wet bulb temperature: -27,0 ... 60,0 °C
- KABEL: Option separated sensor tube , incl. option high-humidty sensor Dewpoint temperature: -40,0 ... 60,0 °C
Sensor head (Ø14 x 68 mm) connected to housing via approx. 1m teflon cable.
Enthalpiy: -25,0 ... 999,9 kJ/kg
- SH T: Option Heat-absorption hat / weather protection shield Atmospheric humidity: 0,0 ... 640,0 g/kg
Avoids falsification of meas. data due to sun/Rain etc - p.r.t. page 88 absolute humidity: 0,0 ... 200,0 g/m
EBHT - 1R Resolution: 0,1 %RH or 0,1°C / 0,1°F
s incl. option VO Accuracy: (at nominal temperature = 25°C)
.Bu
.S.Y Humidity: ±2.5 %RH (at recommended range)
E.A Modul
-
Temperature: ±0.4 % of meas. value ±0.2°C
Transmitter
Electric connection: elbow-type plug acc. to DIN 43650

(IP65), output 2-wire connection,
max. 1,5mm2 each, no polarity
4,2mm Ø Ambient temperature:
electronic, housing: -25...50°C
sensor (sensor tube): -40...100°C (for short time up to 120°C)
Housing: 82 x 80 x 55 (L x B x H),
material: ABS, IP rating: IP65
Sensor tube: tube-Ø 14mm, screwable
protection cap with stainless
steel gauze (105 µm).
Temperature probe
Total length approx 50 mm or

220 mm (standard)
ptional e tended length 00, 400 or 500 mm avail-
able. (please specify upon order!)
Option Display: 10mm high LCD-display
he option additionally
has pushbuttons for calling
type - 2K with central sen- EBHT - 2K min. ma . values and ad ust-
type -1K sor tube arrangement and ment of measuring parameters
pointing downwards (e.g. (offset and scale correction).
for direct mounting onto
or outdoor use:
plain channel surfaces)
Option encapsulated PC board required. We also
Alarm / Protection
recommend using a heat absorption hat (weather

protection shield) to avoid falsification of measuring
data due to sun/rain etc. (p.r.t. page 88)
Other types upon re uest
Spare parts
Spare protection cap
with stainless steel gauze (105µ mesh size)
- for standard and high humidity use
Bronze filter
(not for use in high humidity use)
0
EASYBus - sensor modules for temperature
Handheld instrument
EBT - 2R Specification
Measuring range:
EBT - 2RE with external sensor for lower
EBT - 2R: -25,0 ... 70,0 °C or -13,0 ... 158,0 °F
or higher temperatures. Sensor: like GTF2000LE on page 104 of catalogue
EBT - 2RE: -50,0 ... 150,0 °C or -58,0 ... 302,0 °F
-VO: Option On-site display Resolution: 0,1 °C / 0,1 °F
Accuracy: ±0.4% of meas. value ±0.3°C
(at nominal temperature = 25°C)
.Bu
s Sensor element: Pt1000 acc. to DIN IEC 751
.S.Y
E.A Modul Electric connection: 2 pin screw-type terminal, no
-
polarity, max. 1,5mm2
00
00
Ambient temperature: -25...50°C (electronic)

0
Housing: stream-lined housing for indoor

installation (can be directly
mounted on flush-type sockets)
Dimensions: 70 x 70 x 26 mm (H x W x D)
0 00
Sensor (EBT-2RE): V4A-can, 5mm Ø, 50mm long,
approx. 1m silicone cable
Option Display: 10 mm high LCD-display
EBT - AP1 (measuring range:: -50,0 ... +150,0°C) as of Specification

Measuring range:
EBT - AP2 (measuring range:: -50,0 ... +400,0°C) .Bu
s as of
.S.Y - AP1 AP3 AP4: -50,0 ... 150,0 °C or -58,0 ... 302,0 °F
E.A Modul
EBT - AP3 (measuring range:: -50,0 ... +150,0°C)
Logger / EASYBus
- as of - AP2: -50,0 ... 400,0 °C or -58,0 ... 752,0 °F
- AP5: -199,9 ... 650,0 °C or -199,9 ... 999,9 °F
EBT - AP4 (measuring range:: -50,0 ... +150,0°C) as of Sensor element: Resistance thermometer
Pt1000 acc. to DIN IEC 751
EBT - AP5 (measuring range:: -199,9 ... +650,0°C) as of
Resolution: 0,1 °C / 0,1 °F
observe necessary order information
Accuracy (electronic): (at nominal temperature = 25°C)
-VO: Option On-site display (LCD with 10 mm high digits) ±0.2% of meas. value ±0.2°C
-LACK: Option Encapsulated PC-board (for outdoor use) Sensor accuracy: (Pt1000)
Standard: acc. to DIN Kl.B (±0,3°C at 0°C)
- L... (Longer probe tube); -HL... (longer collar tube): Option : 1/3 DIN: ±0,1°C at 0°C
Price incl. up to 100 mm, extended length: price per 100 mm (upcharge p.r.t. page 10 )
EBT - AP1 EBT - AP2 EBT - AP3 Electric connection: elbow-type plug acc. to
DIN 43650 (IP65), output 2-wire
connection, max. 1,5mm2 each,
no polarity
Transmitter
Sensor connection: 2-wire connection available
(e.g. EBT - AP5)
Ambient temperature (electronic): 0...70°C
Standard: Standard: Standard:
Temperature coefficient: 0,05%/°C
water-proof IP 65
G G L 50mm
EBT - AP1
L 100mm HL 50mm D 3mm

D mm L 100mm
Storage temperature: -20...+70°C
D mm Housing: 82 x 80 x 55 (L x B x H),
material: ABS, IP rating: IP65
Mounting position: any
EBT - AP4 ixing: by means of screw-thread or
Design types fixing holes in the housing
Temperature probe
(accessible after top cover has

Design 1: With threaded pin G for direct screw connection. been removed).
Design 2: For higher temperatures, threaded pin G Mounting distance: 50 x 70mm
at a distance from housing. HL = collar tube length.
ixing screws: max. shaft Ø: 4mm
Design 3: Indoor or outdoor probe for direct wall mounting
(encapsulation of electronics re uired for outdoor use). Sensor mounting: sensors are electrically insu-
lated as a standard.
Design 4: Duct-type probe with probe tube arranged centrally
and pointing downwards. Thread si es G : 1/2 (standard) material V4A
Design 5: Transducer for existing Pt1000 sensors or for options : G1/4 , G3/8 , G1/2 , M5, M6,
applications where probe and housing need to be M8, M10, M12,
Standard:
separated (e.g. extremely high ambient tempera- other threads upon re uest!
L 100mm
D mm ture or due to design reasons). Sensor tube: D : 3 mm, 4mm, 5 mm, 6 mm
and 8 mm - material: V4A
ther design types upon re uest - please do
Alarm / Protection
Collar tube: HL = please specify length desired

not hesitate to contact us !
EBT - AP5 (for ..-AP2 only) (V4A-tube)
Option Display: 10 mm high LCD-display
Ordering information
he option additionally
at least necessary: has push-buttons for calling
Type, sensor element and type specific sensor tube data: min. ma . values and ad ust-
FL and D (AP1 - AP4), G (AP1, AP2), HL (AP2). ment of measuring parameters
Ordering examples: all data to be mentioned in any case! (offset and scale correction.
EBT - AP1, G = 1/2 , FL = 100 mm, D = 6 mm
EBT - AP3, FL = 50 mm, D = 3 mm
EBT - AP5
1
EASYBus - sensor modules EASYBus - sensor modules
Handheld instrument
for temperature for standardi ed signals

FL
D
FL
HL FL
EBN / W - ... EBN / K - ...

D
with elbow-type plug with connection cable

s
.Bu
.S.Y
E.A Modul
-
EBT - I 1 s
EBN / K - ...1)
.Bu
.S.Y
E.A Modul
EBT - I 2 - EBN / W - ...1)
Logger / EASYBus
1)
- Please specify desired standardized signal upon order: (e.g. EBN / K - 0..10V)
EBT - I 3
Specification General
Meas. range: he probe length F has to be chosen long enough, that ll standard signals (0- , 0-10 , 0- 0m , 4- 0m , others on re uest)
the allowable temperature range of the electronics situated can be ac uired on the us with its current module.
in the tube sleeve is not e ceeded. hen using a according interface converter an the EASYControl net soft-
EBT I 1 (standard): -30,0 ... +100,0 °C ware different transmitters can be connected resp. watched.
EBT I 2 (standard): -30,0 ... +100,0 °C
EBT I 3 (standard): -70,0 ... +400,0 °C
other measuring ranges (ma . - 00 ... 500 ) upon re uest
Transmitter
Meas. probe: internal Pt1000-sensor

Accuracy: (at nominal temperature = 25°C) Specification
Electronic: ±0.2 % of meas. value ±0.2 °C Input signal: specify desired type upon order
Measuring probe: standard: DIN class B 0...2V, 0...10V, 0...20mA or 4...20mA.
optionally higher sensor accuracy available (input is not isolated for us)
Interface: EASYBus-interface Measuring range: -1999 to 9999 Digit,
attatched 2-pole cable, cable-length approx. 1m. easuring range and decimal point can be set
For direct connection to a converter or to the via EBxKonfig software. (available free on our
EASYBus. homepage).
Operating ambient of electronics (in tube sleeve): Accuracy: ± 0.5 % (at nominal temperature)
Temperature probe
working temperature: -25 to 70 °C Working temperature: -25 to +60 °C

relative air humidity: 0 to 100 %RH Storage temperature: -30 to +70 °C
Housing: stainless steel housing Interface: EASYBus-interface
Dimensions: depending on sensor construction attached 2-pole cable, cable-length approx. 1m.
tube sleeve: Ø15 x 35 mm (without screwing) For direct connection to a converter or to the
EASYBus.
tube length L: 100 or 50 mm or on customer re uirement
Housing: 48,5 x 48,5 x 35,5 mm (H x W x D)
tube diameter D: Ø 6 mm or on customer re uirement
(with elbow-type plug: 50,5 x 90 x 39,5 mm),
(available Ø: 4, 5, 6 and 8 mm)
splash-water proof IP65
collar tube length HL: 100 mm or on customer re uirement
Electric connection: (for input signals)
thread: G1/2 or on customer re uirement
- EBN / K - ...: for connection to standardized signal source via
(available threads M8x1, M10x1, M14x1.5,
0.5 m connection cable.
G1/8 , G1/4 , G3/8 , G3/4 )
Alarm / Protection
- EBN / W - ...: elbow-type plug according to DIN43650 for plug-

Min-/max-value memory: the min-/max-value will be stored
in into an existing transmitter connection.
Ad usting: via interface by means of offset and scale values
Options / upcharges Options / upcharges

- L ...: longer tube each started further 100mm VO: On-site display
- HL ...: longer collar tube each started further 100mm
- D ...: other tube diameter without upcharge
- G ...: other thread upon request
2
EASYBus - sensor modul EASYBus - sensor modul
Handheld instrument
for carbon monoxide (CO) for carbon dioxide (CO2)
s s
.Bu .Bu
.S.Y .S.Y
E.A Modul E.A Modul
- -
EBG - CO - 1R EBG - CO2 - 1R
Properties Properties
Logger / EASYBus
High quality CO transmitter for detection of carbon monoxide in underground Due to the fact, that CO2 is an important indicator for the quality of air in
garages, parking garages, boiler plants, heating systems, garages as well rooms, it s super important to measure the CO2 content.
as in the ambient air. The recommended CO2 limit value for ambient air is 1000 ppm . An exceed-
The CO sensor module has a very long-lasting electrochemical measuring ing of this limit causes tiredness and a loss of concentration.
cell and could be easily installed. The high quality and precise CO2-module works according to the infrared
Range of Application: principle (NDIR). An auto-calibration procedure compensates aging effects
underground garages, parking garages and is responsible for an excellent long term stability of this CO2-module.
boiler plant and heating systems Additionally, there is a local display which shows beside the actual CO2
motorcar garage concentration, the minimum and maximum values as well as an optical
alarm.
Highlights:
Highlights:
long-lasting electrochemical measuring cell
automatic zero calibration auto-calibration procedure
3 years warranty for the co sensor element auto-calibration procedure
for surveillance of the recommended CO2 concentration in ambient air
Transmitter
Measuring range: 0 ... 300 ppm CO (carbon monoxide) Meas. range: standard: 0 ... 2000 ppm CO2 (carbon dioxide)
Measuring principle: electrochemical, permanent measuring opt. /5000: 0 ... 5000 ppm CO2 (carbon dioxide)
Reproducibility: < 3 ppm according to VDI 2053 Measuring principle: infrared principle (NDIR)
Response Time T90: < 60 s Accuracy: standard: ±50 ppm ±2 % of meas. value (at 20°C, 1023 mbar)
Cross sensitivity: < 2% of 300 ppm CO (acc. to VDI 2053) opt. /5000: ±50 ppm ±3 % of meas. value (at 20°C, 1023 mbar)
Linearity error: < 2% of 300 ppm CO (acc. to VDI 2053) Interface: EASYBus-interface
Offset ad ustment: automatically Auxiliary energy: 12 ... 30 V DC, max. 600 mA
Interface: EASYBus-interface Display: approx. 10 mm high, 4-digit LC-display
Temperature probe
Auxiliary energy: 14 ... 30 V DC, max. 50 mA Working condition: -10 ... +50 °C, 5 ... 95 %RH, 850 ... 1100 hPa
Working condition: -10 ... +40 °C, 15 ... 95 %RH (non-condensing) Storage condition: -25 ... +60 °C, 5 ... 95 %RH, 700 ... 1100 hPa
Option: on site display 3 -digit LC-display Electric connection: elbow-type plug acc. to DIN 43650 (IP65),
EMC: according to EN 50 081-1, EN 50 082-2 B max. wire cross section: 1.5mm ,
Electric connection: elbow-type plug acc. to DIN 43650 (IP65), wire diameter from 4.5 to 7 mm
max. wire cross section: 1.5 mm , Terminal assignment: 2 x EASYBus, no polarity
wire diameter from 4.5 to 7 mm 2 x Auxiliary energy
Housing: ABS, 82 x 80 x 55 mm (without elbow-type plug) Housing: ABS, 82 x 80 x 55 mm (without elbow-type plug)
Mounting: with fixing holes for wall mounting
Mounting distance: 70 x 50 mm (W x H)
Fixing screws: max. shaft-Ø
Fixing screws: max. shaft-Ø 4 mm
Alarm / Protection
eatures: - min-/max-value memory,

Options / upcharge
- optical alarm,
VO: on site display - input of offset and scale for adjusting
Accessories
G -01 test gas cap GT (for controlled flow with test gas) Options / upcharges
G -02 gas bottle with 12l test gas: 30 ppm CO 5000: measuring range: 0 ... 5000 ppm CO2
G -03 gas bottle with 12l test gas: 300 ppm CO
G -04 gas valve unit MiniFlo for gas bottles with 12l Accessories
GSN 24 plug-in power supply (230VAC => 24VDC/300mA) GSN 24- 50 plug-in power supply (230VAC => 24VDC/750mA)
additional accessories upon re uest
3
EASYBus-display and monitoring device for 20 channels
Handheld instrument
Housing: 48 x 96 x 100mm (H x W x D)
Front
s Panel cutout: 43 x 90,5 mm (H x W)
48 x 96 .S.Y
E.A Modul
.Bu
Front: Transparent membrane keyboard IP65. Sealing for housing
-
for installation according to IP65 will have to be ordered separately.
Connection: 2-wire connection in ring-, tree- or star type. No
polarity.
Connection terminals: screw-type/plug-in terminals
Ambient temperature: -25 to 50°C (permissible ambient temperature)
Voltage supply: 230V AC 50/60Hz
Power consumption: approx. 9 VA
W
EB 3000 EB 3000 FTR NE
Set for Moisture / Temperature Controlling
Up to 20 sensor-modules or loggers can be connected
Sensor module supply and data transfer are carried out Scope of Supply:
via one single 2-wire line EB 3000: monitoring and controlling device (p.r.t. page 74)
5 relay outputs (4 x controlling, 1 x alarm) EBHT - 1R: temperature / mumidity modul (p.r.t. page 70)
VSL2P: 10 m twisted pair cable
Controller functions can be assigned to any channel, e.g.:
- 4 x two-point-controllers (of 4 sensors)
- 2 x three-point-controllers (of 2 sensors)
- 4-way switch (of 1 sensor), ...
EBHT - 1R
Logger / EASYBus
2 further functions / calculations:

- average value over more sensors
- difference of 2 sensors
- special functions (upon request)
Alarm monitoring for all connected EASYBus-moduls
easy configuration via front-side keypad or via interface
Via serial interface the connected devices can be read
or additionally be monitored with a PC.
Up to 1000m cable-length possible
Additional connection of a second EB3000 for enlarge-
ment
Transmitter
Specification
Display range: -1999 to +9999 digit VSL2P
Resolution: depending on sensor module used EB 3000
Accuracy: depending on sensor module used.
Sensor modules: all intelligent EASYBus sensor modules
Sensor supply: via EB 3000 Low-priced monitoring and controlling of temperature and
max. bus load: 30 EASYBus standard loads humidity. With a single 2-wire twisted pair cable (e.g. bell
meas. channels: 20 wire) the humidity- / temperature sensor EBHT-1R will
perm. cable length: 500 m e en in on t e of c e n wirin be connected with the EB 3000. The maximum allowable
Switching outputs: 4 relay outputs (NO), shared input. distance between sensor and controlling device amounts to
Temperature probe
Outputs can be as signed to any channel

500m.
Switching power: 230VAC, 5A, ohm resistive load Range of application:
Switching function: 2-point controller, 2-point controller inverting
Refrigeration warehouse, green house, storage room, ma-
Switching points and delay for each output freely selectable
ture room etc.
Alarm output: 1 relay output (change-over contacts)
Switching power: 230VAC, 5A, ohm resistive load Advantages:
Alarm function: Common alarm for all sensors. Simple installation by means of polarity free 2-wire system
Configuration: directly on the device or via additional4 switching outputs (humidify, dehumidify, heating, cooling)
configuration software and 1 alarm output
(supported converter is needed). Easy retrofitting of up to 20 single sensors
Min./Max. value memory: from all connected sensor modules the (temperature, humidity, standard signals etc.)
Max. and Min. value are callable via front-side keypad. Excellent cost-performance-ratio
Alarm / Protection
Calculation-functions: there are 2 virtual channels additionally Note:

to the sensor-channels. A calculated value can be displayed here. For configuration of the EB 3000 and recording / reading-out of
Possible calculation functions: sensor-deviation, averaging above connected EASYBUS modules respectively, the serial converter
x sensors, etc. EBW 1 will be required
Self diagnosis: permanent self-diagnosis, diagnosis of all con-
Accessories
nected sensor moduls to ensure trouble-free function.
Display: main display: LED, 4-digit, 13mm EBW 1 serial converter EASYBus <=> RS232
further informations p.r.t. p. 76
channel display: LED, 2-digit, 7mm
Interface: EASYBus-interface with supported converter (e.g. EBS 20M software for recording and archiving
of max. 20 sensor modules (p.r.t. p. 41)
EBW1) GRS232 compatible, for communication with a PC.
7
EASYBus-display and monitoring EB 3000 / EB 2000 MC
device for 9 channels cost savings in all areas
Handheld instrument
short installation time - only one 2-
pin line.
Front
48 x 96 polarity must not be observed by

installation
minimum material requirement
- only one display and monitoring
device for up to 9 / 20 sensor mod-
.Bu
s ules
.S.Y
E.A Modul
-
minimum time requirement for plan-
ning and commissioning - automatic
EB 2000 MC sensor module detection, expand-
able for up to 9 / 20 sensor modules
Display and monitor up to 9 sensor modules or loggers. of any type.
automatically detects the number and type of sensor modules connected.
Sensor module and logger supply as well as data transfer are carried out via
one single 2-wire line.
Monitoring of all sensor and logger functions as well as cable and sensor
damage etc.
Logger / EASYBus
2 volt-free relay outputs for seperate min./max. alarm.
RS232-interface ensures easy configuration
The EB 2000 MC can be used as a interface converter RS232 - EASYBus
so that all EASYBus-moduls connected can be read and configurated via the Accessories
EB 2000 MC. APG-
surface-mounted housing (incl. sealing)
Specification
Measuring range: -1999 to +9999 digit GGD 896
add. sealing for panel mounting acc. to IP65
Resolution: depending on sensor module used.
Accuracy: depending on sensor module used. GRS 01/9
Sensor modules: all intelligent EASYBus sensor modules as well as EASYLOG interface adapter RS232: (adapter cable to
Transmitter
9-pin PC-interface)
(max. 9) can be connected. 2-wire connection in ring-, tree-
(Please note order Dsub9 - Dsub 5, if
or star type. No polarity, max. cable length: 200m.
re uired! - 9 - 5 )
Sensor supply: via EB 2000 MC.
Fault messages: sensor damage, sensor short circuit, values above/below EBW 1
permissible area. interface converter: EASYBus to RS232
Self diagnosis: const. monitoring to ensure trouble-free function. EBSK 01
Interface: RS232 for easy configuration, or as interface converter connection cable 1m, for EASYLOG, EBN
RS232 - EASYBus.
EBSK 03
Min./Max. value memory: for up to 9 different sensor modules, selectable via
Temperature probe
connection cable 3m, for EASYLOG, EBN

front side keyboard.
Min./Max. alarm: 2 volt-free relays (make contact), 10A (ohmic load), 250V, VSL 2P per m
50/60Hz, for min./max. alarm, programmable via front side twisted special cable for EASYBUS-sys-
button or RS232-interface. tem, cross section 2 x 0,75 mm
Alarm delay: from 0 to 9999 minutes, can be set individually for each channel. AKL 1P
Display: 4-digit, red, 13mm high LED-display. 16 additional LEDs for special-branch terminal or connection to
display and monitoring functions. VSL2P, 2 pieces
Front: Transparent membrane keyboard IP65. Sealing GGD 4896
for housing for installation according to IP65 will have to be EASYBus-Configurator
software for comfortable editing of all
ordered separately.
EB3000-parameters. (downloadable from
Alarm / Protection
Housing: rack-type housing, 48 x 96 x 100mm (H x W x D). our homepage ervice -- Download)

Panel cutout: 43 x 90,5 mm (H x W).
Connection terminals: screw-type/plug-in terminals Sensor, logger modules
p.r.t. page 46, 49 - 52, 62 - 65, 70 -73
Ambient temperature: 0 to 50°C for temperature, humidity, norm. signal,
Voltage supply: 230V AC 50/60Hz (standard) frequency, ...
Power consumption: approx. 3,5 VA
Options / upcharges
- Voltage supply: 12V AC, 24V AC or 115V AC 50/60Hz
(others upon request)
75
EASYBus - interface converter
Handheld instrument
EBW 1 interface converter

for connection of max. 9 EASYBus-modules to the RS232-interface
(9-pin Dsub) of your PC.
Scope of supply: interface converter, 9-pin Dsub extension cable

for connection of one EASYBus-module (e.g. EASYLOG ) to the USB-
interface of your PC. (Power supply: via USB)
Scope of supply: interface converter

for connection of max. 64 EASYBus-modules to the RS232-interface
of your PC.
Scope of supply: interface converter, 9-pin Dsub extension cable
EBW 240 incl. software EASYControl net

Logger / EASYBus
interface converter for connection of max. 240 EASYBus-modules

to the RS232-interface of your PC.
Scope of supply: interface converter, plug-in power adapter, 9-pin Dsub
extension cable, software EASYControl.
Specification:
Transmitter
EBW 1 EBW 3 EBW 4 EBW 240

Voltage supply: 230 V AC / 50Hz not necessary 230 V AC / 50Hz 230 V AC / 50Hz
on request (over power adapter)
Power consumption: approx. 5 W max. 0.5 W approx. 15 W approx. 30 W

Max. permissible sensor modules *: 9 1 64 240
Permissible cable length **: 200 m 10 m 1000 m 1000 m
Baud rate: 4800 Baud
Temperature probe
Serial connection: RS232 USB RS232 RS232

Electrical isolated: yes yes yes yes
Overload display: no no yes yes
Short-circuit proof: yes (limited: 30sec.) no yes (passiv) yes (activ)
Operating temperature: 0 ... 50 °C -25 ... 50 °C 0 ... 50 °C 0 ... 55 °C
Humidity: 20 ... 80 %RH, non-condensing
Storage temperature: -20 ...+70 °C -25 ...+70 °C -20 ...+70 °C -20 ...+60 °C
Dimensions (H x W x D): 112 x 80 x 45 mm 56 x 31 x 24 mm 100 x 75 x 110 mm 200 x 240 x 55 mm
(without power adapter)
Bit Recovery no no yes yes
Alarm / Protection
* depending on type of the used sensor modules

** depending on type of cable and wiring
Interface accessories
SB-Adapter for connection of an interface converter to the USB-interface of yout PC
GSA 9S-25B connection-adapter: 9-pin Dsub-plug <=> 25-pin Dsub-socket
ote the us-monitoring device should be can used as a converter for ma . 9 sensor modules.
EASYBus-Configurator free of charge
Handheld instrument
Software for initial installation and configuration of EASYBus-systems.
Software executable with: Windows 2000, XP, Vista and Windows 7.
● EASYBus modules, display- and controlling-devices can be han-
dled easily and comfortably.
● Listing of all connected modules in a treeview, therefore an easy
overview of the system is possible.
● Settings of EASYBus modules can be done clearly.
● Easy installation of the EB3000 control-, display- and monitoring-
device:
- Adding of modules via Drag&Drop.
- Programming of predefined virtual channel functions
(included in software).
- Switching- and alarm-outputs can be configured easily.
ou can download this software from our homepage

(www.greisinger.de) for free.
EBS 20M W
NE
Logger / EASYBus
EBS 60M
Software for recording, monitoring and displaying up to 20 / 60 sen-
sor modules. Software executable with: Windows XP / Vista / 7
Highlight:
Simultaneous use of several serial interfaces
Simultaneous use of different serial converters
uick and easy installation
Freely scaleable diagrams and alarm limits
Visualization of actual measurements values
Trusted data storage via S L database
Data export For further information p.r.t page 1
Transmitter
W
EASYControl net NE
Software solution for recording, monitoring, displaying and analyse

of sensor moduls.
Software is executable with: Microsoft Windows XP / Vista / 7
(32 / 64 Bit)
Temperature probe
» Trendsetting one measuring-system is a back number

• Embedding different measuring-systems or
measuring-devices via PlugIn
» Peripheral
• Uncoupling of data acquisition, data storage and » Clear
visualisation
Different kinds of visualisation
• Component communication via LAN (table, digital, tachometer, chart)
• Data visualisation by local network Display multiple graphs live in one chart
» Live Tooltips (with status information) for each
• Constantly updating data measuring point in the chart
Alarm / Protection
• Accurate time assignment of the data Blinking symbols on error or status

• Load ancient data and complete them with live data message in the visualisation
Displaying error- and status messages.
» Secured
Displaying min- max- and mean value of
• User accounts (with secured password transmission).
the sensors
• Stored data can’t be modified or manipulated later
• Generate reports and store them as PDF,
» Controlled Excel or Word file
• Trigger EBB Out switching channels via EASYBus
77
EASYBus - components
Handheld instrument
Sensor modules
Logger module (for temperature, humidity, pressure, norm. signals, frequency) p.r.t. page 63 - 6
Sensor module (for temperature, humidity, norm. signals, frequency, ...) p.r.t. page - 3
GIA 20 EB EASYBus module for norm. signal and temperature, with 2 switching outputs p.r.t. page 4
GIA 2000 EASYBus module for norm. signal and temperature p.r.t. page 4
GIR 2002 EASYBus module for norm. signal and temperature, with 2 relay outputs p.r.t. page 50
EBB 1 IN EASYBus sensor module with 1 digital input to monitor a electrically insulated contact
EBB IN EASYBus sensor module with 4 digital input to monitor a electrically insulated contact
Input: EBB 1 IN: 1 digital input for electrically insulated contact s
.Bu
.S.Y
EBB 4 IN: 4 digital input for electrically insulated contact E.A Modul
-
Housing: snap-on housing
Dimensions: approx. 22.5 x 78 x 105 mm
Logger accessories
ESK-1 external starting key, independent from mains supply p.r.t. page
to start logger of the type EASYLOG 40... and EASYLOG 24... in the starting mode St.Et
GWH 0K wall suspension with lock as protection against theft p.r.t. page
Logger / EASYBus
suitable for all EASYLOG (except EASYLOG 40NS W), EBN/K - ..., GIA0420WK and GRA0420WK
GWH 10 simple wall suspension, made of stainless steel, p.r.t. page
suitable for all EASYLOG (except EASYLOG 40NS W).
mount wall suspension at the monitoring point,
the logger may now be easily put in.
Cable
EBSK 01 special plug with approx. 1 m of cable for connection of one EASYLOG, EBN.. to the EASYBus
(Please note the EASYLOG will be supplied without connection cable. he F 40 includes a connection cable 01.
Transmitter
Please order 01, 0 resp. 10 as re uired in case of permanent bus connection!)
VSL 2P twisted special cable for EASYBus-system, cross section 2 x 0,75 mm per m
AKL 1P special branch terminal for connection to VSL2P, 2 pieces
Interface converter
EBW 1, EBW 6 , EBW 2 0 EASYBus interface converter, RS232, main supply p.r.t. page
EBW 3 EASYBus interface converter, USB p.r.t. page

Temperature probe
EB 2000 MC EASYBus-display and monitoring device for 9 channels p.r.t. page 5
Interface accessories
USB-Adapter for converter connection to an USB interface
GRS 01/9 interface cable for EB2000 MC for connection to 9-pin RS232 interface of a PC
GRS 02/9 interface cable for EBW2 for connection to a MODEM ...
Alarm / Protection
Software
EBS 20M N E W Windows software for recording and archiving of max. 20 sensor modules p.r.t. page 41
EASYControl net Windows software for monitoring, recording, displaying p.r.t. page
GSOFT 0K Windows software to service the EASYLOG p.r.t. page
ProfiLab-Expert Windows software p.r.t. page 41
EASYBUS.dll Windows-function library for interface communication EASYBus - PC,

to integrate in your own programmes
78
EASYBus - components
Handheld instrument
Alarm monitoring
EBUW 232 A independent alarm monitoring module for EASYBus-modules
The EBUW232A monitores independently, it means without additional PC up to 240 EASYBus-modules
for their alarm conditions. If an alarm is present, the alarm output of the EBUW 232 A will be set.
With the included adapter cable the relay module GNR 232 A can be controlled. Additionally an adequate
to the bus connected switching module (EBB .. OUT) can be controlled.
Power supply: 6 - 12 V DC, max. 10 mA (connection over approx. 50 cm adapter cable)

Switching output: NPN open-collector,
max. switching capacity: 24 V, 50 mA (connection over adapter cable)
GNG 12 - LE plugin power supply 12 V DC / 300 mA
GNR 232 A Power supply and relay module for EBUW 232 A
Power supply: 230 V, 50/60 Hz
Outout voltage: 12 V DC ±5% (regulated) 25 mA
Relay output: volt-free changeover contacts, switching current max. 10 A ohmic load
Dimensions: 96 x 61 x 60 mm (H x B x T)
EB 2000 MC EASYBus-display and monitoring device for 9 channels p.r.t. page 5
EB 3000 EASYBus-display, regulating and monitoring device for 20 channels p.r.t. page 4
Logger / EASYBus
Switching modules
EBB 2 OUT / BP EASYBus switching module, 2 relay, bus-powered
s
EBB 2 OUT / 12V .Bu
EASYBus switching module, 2 relay .S.Y
E.A Modul
-
EBB OUT / BP EASYBus switching module, 4 relay, bus-powered
EBB OUT / 12V EASYBus switching module, 4 relay
The EBB ... OUT / ... are switching modules for the EASYBus that can be arbitrarily placed on a location in
the bus system. The control of the modules relays is realized by an alarm monitoring module EBUW232A
or by PC-software (e.g. EASYControl).
There are 2 different design types of the switching modules:
... / BP: Bus Power - no external auxiliary supply needed
Transmitter
... / 12V: external 12V-supply needed - this allows faster switching and a higher operating reliability due to
adjustable preferred relay states in case of a system failure. (Power supply unit not in scope of supply)
EBB 2 OUT / BP EBB OUT / BP EBB 2 OUT / 12V EBB OUT / 12V
Power supply: Powered by the EASYBus 12 V DC ±10% / 150 mA
Switching outputs: 2 changers 4 changers 2 changers 4 changers
Switching reaction: < 1 seconds < 2 seconds < 0.1 seconds < 0.1 seconds
Switching power: max. 250 V AC / 16 A ohmic load
Connection: screw type terminal
Dimensions: 96 x 48 x 60 mm 96 x 94 x 60 mm 96 x 48 x 60 mm 96 x 94 x 60 mm
Temperature probe
Remote operation
MODEM 2500 analog hat rail MODEM with alarm input and SMS alarm
for the EASYBus remote data transfer via analog telephone nets.
MODEM 3500 GSM GSM MODEM with alarm input and SMS alarm
for the EASYBus remote data transfer via 900MHz mobile nets (D1, D2, etc.).
Accessories: Antenna GSM (Dual-band industrial antenna with bracket)
DFM 232 SET Wireless data connection, 433MHz, consisting of transmitter and receiver
Alarm / Protection
for wireless data transmission to EASYBus-modules via 433Mhz radio network.

Bi-directional RS232 interface (DB9), e.g for the connection of EBW 1,
large range of up to 1500 m at free air, within buildings similar to DECT telephones.
LAN 3000 Serial-to-Ethernet-Converter

for remote access to EASYBus-modules via LAN or Internet.
Serial RS232 Input (DB-9) e.g. for EBW1, 1* LAN Port RJ-45 10/100Mbps
Supported protocols: TCP, DHCP, HTTP, etc.
Network connection via: Stat. IP, DHCP or PPPoE
79
reely scaleable temperature transducer WK
Handheld instrument
GTM -MP
General
The new generation of our transducers brings more flexibility thanks to state of the art digital microprocessor technology.
Due to the many different design types and a measuring range of -50 ... 400 °C nearly all kinds of applications can covered.
on site temperature display user-ad ustment possible

output signal freely scaleable possible output signals: 4-20 mA 0-1 V or 0-10 V
Design types
Design type 1 Design type 2 Design type 3 Design type 4
for direct screw connection for high temperatures indoor outdoor probe duct probe
probe with threaded stem G threaded stem at a distance of HL for direct wall mounting centrally mounted sensor tube pointing
(collar tube) from housing downwards
or l ping ring s rew onne tion p r t p ge
HL
FL
Logger / EASYBus
FL
Standard type: Standard type: Standard type: Standard type:

G = ½ , FL = 100mm, D = 6mm G = ½ , HL = 100mm, FL = 50mm, D = 3mm FL = 100mm, D = 6mm
FL = 100mm, D = 6mm
Specification Prices - temperature transducer

Measuring range: -50.0 ... +400.0°C, free scaleable GTM - MP design type 1
he probe length F has to be chosen long
enough, that the allowable temperature of the case GTM - MP design type 2
Transmitter
and the electronics of 0 is not e ceeded !

GTM - MP design type 3
Accuracy: (at 25°C)
electronic: ±0.4% of meas. value ±0,2°C GTM - MP design type 4
output signal: ±0.2% f.s.
Probe: Pt1000, 2-wire, DIN class B (standard)
Options / upcharges
optional higher sensor accuracy available (p.r.t. page 101)
Output signal: standard 4-20mA (2-wire), freely scaleable

- AV01: output signal 0-1V upcharge:
option: 0-1V, 0-10V (other output signals upon request) - AV10: output signal 0-10V upcharge:
Connection: 4 - 20 mA (2-wire) - LACK: encapsulated PC board upcharge:
for option AV01, AV10: 0 - 1 (10) Volt (3- or 4-wire) (for outdoor application, i.e. applications where condensation is possible)
Auxiliary energy: 12 ... 30 VDC or 18 ... 30VDC (for output: 0-...V)
- L ...: longer tube e ch st rte further 00 upcharge:
Temperature probe
Reverse voltage protection: 50V, permanently

- HL ...: longer collar tube e ch st rte further 00 upcharge:
Perm. impedance (at 4-20mA): RA Ω = (Uv V - 12V) / 0.02 A
Permissible load (at 0-1(10)V): RL Ω > 3000Ω - D ...: other probe diameter
Display: approx. 10 mm high, 4-digit LCD-display - G ...: other thread

Working temperature: -25 to 70°C (electronic)
Accessories
Storage temperature: -25 to 70°C
Relative humidity (electronic): 0 to 95 %RH (non-condensing) Clamping ring screw connection please refer to page 11
f there is a ris of condensation due to temperature changes,
please use our encapsulated or lac uered types (option).
Housing: ABS (IP65) Ordering information
Probe tube: stainless steel If no additional data is added to the design type, the probe will be manufactured with
standard dimensions.
Probe length: for standard length please refer to design type,
If different dimensions are needed, they have to be specified.
optional: any other tube length possible
Alarm / Protection
he probe length F has to be chosen long enough, that the

Ordering examples:
allowable temperature of the case and the electronics of
0 is not e ceeded ! GTMU-MP, type 1
thread G : G1/2 (standard), GTMU-MP, type 3, FL = 100 mm, D = 4 mm
optional: G1/4 , G3/8 , G3/4 , M10, M12, M14, M16
Probe diameter D : 3, 4, 5, 6 or 8 mm
Electric connection: elbow-type plug acc. to DIN 43650 (IP65)
Mounting: 4 housing holes for wall mounting or
by means of plastic tube clamps for duct mounting
unctions: min-/max-value memory,
offset and slope digital adjustable,
output signal freely scaleable (without tools)
0
Temperature transducer GTMU WK cpl. with Pt100 or NiCr-Ni (type K) sensor
Handheld instrument
General
You can choose between 5 design types of the GTMU and 2 sensor types to get an optimised solution for Your needs.
The types 1 - 4 are supplied cpl. with sensor, measuring transducer etc., calibrated and thus ready for use. Type 5 does not include sensor which is either already existing
at your works or will have to be ordered separately acc. to your specifications (p.r.t. pages 108, 109, 112, 113)
design type 1 design type 2 design type 3 design type design type 5
for direct screw connection for high temperatures indoor outdoor probe duct probe for e ternal probes
probe with threaded stem G threaded stem at a distance of for direct wall mounting centrally mounted sensor tube measuring transducer for Pt 100 or
HL (collar tube) from housing pointing downwards. NiCr-Ni sensors already existing
or l ping ring s rew onne tion on site or for applications where
Standard: G = , Standard: G = , Standard: FL = 50mm,
p r t p ge sensor and housing need to be
FL = 100mm, HL = 50mm D = 3mm spaced.
D = 6mm FL = 100mm, Standard: FL = 100mm,
e ue to e tre e hi h ient
Logger / EASYBus
D = 6mm D = 6mm te er tures or to esi n re sons
Specification Prices - temperature transducer

Practical sensor elements: GTMU design type 1
- resistance thermometer: Pt100 class B (higher sensor precision p.r.t. page 103)
- thermocouple: NiCr-Ni class 1 GTMU design type 2
Max. measuring ranges: (not available for every design type)
Pt100: -200 ... +800°C GTMU design type 3
NiCr-Ni: -200 ... +1372°C
GTMU design type
Standard measurings ranges:
Pt100: 0...100°C, 0...200°C, -50...+50°C, -50...+150°C GTMU design type 5
NiCr-Ni: 0...100°C, -50...+150°C, -200...+300°C, 0...600°C, 0...1200°C
Optional: any other measuring range against upcharge Upcharge - transducer options
Accuracy electronics: ±0.2% FS (Pt100) or ±0.2% ±0.5°C (NiCr-Ni)
igher precision e.g. via optionally different transducer ( 01, R 4 0) GTMU / GITT electrically isolated transducer upcharge:
Output signal: (available sensors: Pt100, Pt1000, NiCr-Ni, only output 4-20mA possible)
Transmitter
Standard: 4 - 20 mA (2-wire)
Optional: 0-1V, 0-2V, 0-5V, 0-10V (3- or 4-wire) (not available for 01, R 4 0)
GTMU / RT 20 transducer for outdoor usage
Auxiliary energy: Uv = 12 ... 30 V DC (at 0-10V: Uv = 18 ... 30 V DC) (available sensors: Pt100, only output 4-20mA possible)
(for special types GTMU/GITT and GTMU/RT420: 8 ... 30 V)
Options / upcharges
Reverse voltage protection: 50 V permanently
Allowable burden (for 4-20mA): RA Ω = (Uv V - 12V) / 0.02 A - AV...: other output signal upcharge:
or spe i l t pes n re er to this p ges (please state desired output voltage - not available with and R 4 0)
Allowable load (for 0- Volt): RL > 3000Ω - MB ...: any other measuring range upcharge:
Ambient temperature electronics: 0 ... +70°C (-40...+85°C at .../RT420 and .../GITT) (please state desired measuring range)
Temperature coefficient: Pt100: 0.01 % / °C o upcharge for option - .., - if more than 10 pcs per type are ordered.
NiCr-Ni: 0.05 % / °C
Storage temperature: -20 ... +70°C - LACK: encapsulated PC board upcharge:
(for outdoor application, i.e. applications where condensation is possible)
Temperature probe
Housing: ABS (IP65)

Probe tube: stainless steel - POT: electrically insulated NiCr-Ni-probe upcharge:
Probe length: for standard length please refer to design type,
- FL ...: longer tube, e ch st rte further 00 upcharge:
optional: any other tube length possible
Thread G : 1/2 (Standard), - HL ...: longer collar tube, e ch st rte further 00 upcharge:
optional: G1/4 , G3/8 , M5, M6, M8, M10, M12 - D ...: other probe diameter
Probe diameter D : 3, 4, 5, 6 or 8 mm
Sensor installation: Pt100: sensors will be electrically insulated at our works.
- G ...: other thread upon request
NiCr-Ni: sensors are not electrically insulated as a standard - VO: on-site display upcharge:
(connection between sensor and outer sheathing). (for output signal 4- 0m , au iliary energy v 1 ... 0 D )
Optional electrically insulated design-type available.
Mounting: with holes for wall mounting Prices - sensor housing without transducer
Mounting distance: 70 x 50 mm (W x H) e also offer the sensors without the integrated transducer.
Fixing screws: max. shaft-Ø 4 mm he sensor connection then are directly connected to the elbow plug.
Electric connection: elbow plug acc. to DIN 43650 (IP65)
Alarm / Protection
Sensor connection: (for type 5) Pt 100: 2- or 3-wire connection possible GTMU-OMU design type 1
NiCr-Ni: 2-wire only
PG 7 screwed conduit entry for sensor cable
GTMU-OMU design type 2
connection by screw-type terminal on PC board GTMU-OMU design type 3 or design type
(available sensors Pt100 (4-wire), Pt1000 (4-wire), i r- i)
Ordering information
At least necessary ordering information: design type, sensor and meas. range GTU-2R-OMU designer housing for ambient
(available sensors Pt100 (4-wire), Pt1000 (4-wire))
If no additional data is added to the design type, the probe will be manufactured
with standard dimensions.
Note: the housing also maybe
Ordering examples: mounted directly to a concealed
00
00
distribution box.
GTMU, type 1, Pt100 DIN KL.B., 0...100°C
GTMU, type 3, NiCr-Ni, 0...1200°C, FL=100mm, D=4mm, POT
0 00
1
Temperature-measuring PCB Temperature-measuring PCB
for Pt100 or in snap-on housing for NiCr-Ni or in snap-on housing
Handheld instrument
NiCr-Ni
Pt100 2-, or 3-wire con-
nection
1)
4 - 20 mA 1) Uv + Uv
1) For 4 to 20 mA only tw o
1) For 4 to 20 mA only
two outer terminals will
outer terminals will be required.
The centre terminals will not have
Voltage Uv + + Uv WK
be required. Signal
any function.
WK -Uv and signal are connected!
Signal
(e.g. 0...1V, 0...10V, etc.) GNTP PCB
GTP PCB GNTP -SG snap-on housing
GTP -SG snap-on housing Design-type: PC board completely ready for operation (sensor not
included) with any measuring range and any output. 2-pin connection
Design-type: PC board completely ready for operation (sensor not includ- terminal for NiCr-Ni-sensor or compensation line. Optionally available: PC
ed) with any measuring range and any output. 3-pin connection terminal for board with DIN type flat-pin jack free from thermo voltage for direct plug-in
Pt 100 in 2 or 3-wire technology. Connection terminal for output in 2-, 3-, or of temperature sensors with DIN type flat-pin plug. Connection terminals
4-wire technology - depending on type desired. for output 2- to 4-pin (depending on output in 2-, 3- or 4-wire technology).
Specification : Specification :
Logger / EASYBus
Sensor element: for Pt 100 acc. to DIN IEC 751. Sensor element: for NiCr-Ni (type K) acc. to DIN IEC 584
Suitable sensors available (prepared or unprepared) from stock - please suitable sensor can be supplied custom-designed according to your
refer to pages 112 - 113. specifications or in standard design from stock (p.r.t. pages 105 - 109)
Sensor connection: 2- or 3-wire connection. Meas. range: from -200 to +1200°C
Automatic line resistance compensation for 3-wire connection. Standard ranges: GNTP 0100: 0 ... 100°C
Measuring ranges: from -200 to +800°C GNTP 0600: 0 ... 600°C
Standard ranges: GTP 0100: 0 ... 100°C GNTP 01200: 0 ... 1200°C
GTP 0200: 0 ... 200°C GNTP 5015: -50 ... +150°C
GTP 5050: -50 ... +50°C GNTP 2030: -200 ... +300°C
GTP 5015: -50 ... +150°C OPTION: any measuring range available against upcharge
OPTION: any measuring range available against upcharge Output signal: 4 - 20 mA (2-wire)
Output signal: 4 - 20 mA (2-wire) optionally available 0-1V, 0-2V, 0-5V, 0-10V (3- or 4-wire)
optionally 0-1V, 0-2V, 0-5V, 0-10V (3- or 4-wire) Auxiliary energy: Vs = 12 ... 30 V DC (at 0-5/10V: Vs = 18 ... 30 V DC)
Auxiliary energy: Vs = 12 ... 30 V DC (at 0-10V: Vs = 18 ... 30 V DC) Reverse voltage protection: 50 V permanently
Reverse voltage protection: 50 V permanent Permissible impedance (at 4-20mA): RA Ω = (Uv V - 12V) / 0.02A
Transmitter
Permissible impedance (at 4-20mA): RA Ω = (Uv V - 12V) / 0.02A Permissible load (at 0- Volt): RL Ω > 3000Ω
Permissible load (at 0- Volt): RL Ω > 3000Ω Operating temperature electronics: 0 ... +70 °C
Operating temperature electronics: 0 ... +70 °C Accuracy electronics: ±0.2% FS ±0.5°C
Temperature coefficient: 0.01% / °C Temperature coefficient: 0.05% / °C
Storage temperature: -20 ... +70 °C Storage temperature: -20 ... +70 °C
Housing: ABS (IP65) Relative atmospheric humidity: 0 ... 80%RH, non-condensing
Relative atmospheric humidity: 0 ... 80% r.h., non-condensing Option: Option: encapsulated PC board
encapsulated PC board PC board dimensions: approx. 56,5 x 73 x 20 mm (H x W x D)
PC board dimensions: approx. 56,5 x 73 x 20 mm (H x W x D) Option snap-on housing: for top-hat rail (panel mounting),
Width of housing (pitch) 22.5 mm
Option snap-on housing: for top-hat rail (panel mounting),
Width of housing (pitch) 22.5 mm Mounting: 4 holes, 3.5 mm Ø each
Temperature probe
Mounting distance: 43,5 x 58 mm (W x H)

Mounting: 4 holes, 3.5 mm Ø each
Mounting distance: 43,5 x 58 mm (W x H) Miscellaneous: potentiometer for zero point and scale
Electric connection: screw-type terminals with wire protection and drill
Miscellaneous: potentiometer for zero point and scale
holes for testing pin, wire Ø max. 1.5 mm .
Electric connection: screw-type terminals with wire protection and drill option: screw-type/plug-in terminal
holes for testing pin, wire Ø max. 1.5 mm .
option: screw-type/plug-in terminal Order codes (examples):
Order codes (examples): GNTP / MB: 0...300°C, LACK, SSK: PCB, 4-20mA = 0 ... 300°C,
encapsulated PCB board, screw-type/plug-in terminals
GTP0100 / LACK, SSK: PCB, 4-20mA = 0 ... 100°C, encapsulated PC
board, screw-type/plug-in terminals GNTP5015-SG / AV: 0-1V: snap-on housing, 0-1V = -50 ... +150°C
GTP -SG / AV010, MB: -50... 200°C: snap-on housing, 0-10V = -50...+200°C options - upcharges:
options - upcharges: -AV010: option: output signal 0-10V
-AV...: option: other output signal
Alarm / Protection
-AV010: option: output signal 0-10V (please state desired voltage)

-AV...: option: other output signal -MB: option: arbitrary measuring range
(please state desired voltage) (please state desired measuring range)
-MB: option: arbitrary measuring range o upcharge for option - .., - if more than 10 pcs. are ordered
(please state desired measuring range) -LACK: option: encapsulated PC board
o upcharge for option - .., - if more than 10 pcs. are ordered (for outdoor application, i.e. applications where condensation is possible)
-LACK: option: encapsulated PC board -SSK: option: screw-type/plug-in terminals
(for outdoor application, i.e. applications where condensation is possible) (not possible for type snap-on housing)
-SSK: option: screw-type/plug-in terminals -TSK: option: DIN type flat-pin jack free form thermo voltage
(not possible for type snap-on housing) (not possible for type snap-on housing)
PC board for measuring transducer mounted in water-proof surface-type PC board for measuring transducer mounted in water-proof surface-type
housing (IP65) p.r.t. type GTMU design-type 5 (page 81) housing (IP65) p.r.t. type GTMU design-type 5 (page 81)
82
Temperature transmitter Analog Pt100-transmitter
Handheld instrument
with digital adjustment with digital adjustment
FL
D
GTMU - IF1
(standard: FL = 100 mm, D = 6 mm)
FL
WK
D
GTMU - IF2 WK
(standard: FL = 100 mm, D = 6 mm, G1/2 )
HL FL
1
T03 BU /WE
(transmitter 0-10V, set by our works)
D
GTMU - IF3 1
please specify design-type desired on your order.
(standard: HL = 100 mm, FL = 50 mm, D = 6 mm, G1/2 ) e.g. T03BU, Pt100 3-wire, 0...10 V 0 - 250 °C
GTMU - IF1
General: These transmitter are designed for industrial applica-
GTMU - IF2 tions and are used to measure the temperature through Pt100
resistance thermometers in 2-/3-wire circuits connections.
GTMU - IF3 The 0...10 V output signal is linear with temperature.
The advantages of a continuous analog signal path and those of
Specification: digital adjustment have been combined in the realization of this
Meas. range: he probe length F has to be chosen long enough, that transmitter series.
Logger / EASYBus
the allowable temperature range of the electronics situated
in the tube sleeve is not e ceeded. Specification:
GTMU IF1 (standard): - 30,0 ... +100,0 °C Measurement input: Pt100 (DIN EN60751)
GTMU IF2 (standard): - 30,0 ... +100,0 °C Range limits: -200 ... +850 °C
GTMU IF3 (standard): - 70,0 ... +400,0 °C Meas. span: 40 to 1050 K
other measuring ranges (ma . - 00 ... 500 ) upon re uest Zero shift: at span < 75K: -40, -20, 0, 20 or 40 °C
Meas probe: internal Pt1000-sensor at span = 75K: ± 50 °C
Accuracy: (at nominal temperature = 25 °C) at span > 75K: ± (span * 0.2 + 35 °C)
Electronic: ±0,2 % of meas. value ±0,2 °C Sensor connection: 2- or 3-wire connection
Meßfühler: standard: DIN class B Meas. current: < 0,5 mA
optionally higher sensor accuracy available Max. perm. line resistance (3-wire): 11 Ohm per conductor
Output signal: 4 20 mA (2-wire) Sampling time: continuous because of analog signal path
Transmitter
Auxiliary energy: Uv = 10 30 V DC Output signal: 0 10 Volt, 3-wire technology
Permissible burden: RA ≤ (UV - 10 V) / 0,022 A RA in Ohm, Uv in V Setting time on a temperature change: ≤ 10 ms
Transfer characteristic: linear with temperature
Scaling: the transducer can be scaled freely within the meas-
uring ranges via GTMU-IF programming tool. Transfer accuracy: ≤ ±0.2 % FS
Operating temperature of electronic (in tube sleeve) : -25 to 60 °C Calibration accuracy: ≤ ±0.2 °C or ±0.2 % FS
Housing: stainless steel housing Supply voltage: B 15 30 V DC
Supply voltage error: ±0.01 % FS / V
Dimensions: depending on sensor construction
Permissible load : RL ≥ 10 kOhm
tube sleeve: Ø15 x 35 mm (without screwing)
Load error: ≤ ±0.1% FS
tube length FL: 100 or 50 mm or on customer re uirement
Operating temp.: -40 +85 °C
Temperature probe
tube diameter D: Ø 6 mm or on customer re uirement

(available Ø: 4, 5, 6 and 8 mm) Relative humidity: 0... 95 %RH (non condensing)
oll t e le t HL: 100 mm or on customer re uirement Storage temperature: -40 +100 °C
thread: G1/2 or on customer re uirement Electromagnetic compatibility (EMC):
i e thre s M8 , M 0 , M 5, G 8 , G , G3 8 , G , G3 ) conforming to acc. to DIN EN 61326
Electric connection: approx. 1 m long 4-pin cable Electric connection: via terminals,
(2 x current loop, 2 x interface) cross section of connection terminals max. 1,75 mm
Housing: PC-housing, suitable for installation in con-
Options (upcharges): nection head acc. to DIN 43729 form B.
- FL=...: longer tube, e h st rte urther Operating position: unrestricted
- HL=...: longer collar tube, e h st rte urther Dimensions: Ø 44 mm x 21 mm
- D=...: other tube diameter IP-rating: housing: IP54, connection terminals: IP00
Alarm / Protection
- G=...: other thread upon request Weight: approx. 45 g

- MB=...: other measuring ranges, set by factory
- M12: electric connection: M12 plug Accessories:
Rail adapter
(rail adapter for snap-on to top-hat rail)
Programming tool for T03BU
Accessories: The programming tool consists of: configurations software,
GTMU-IF - Programming tool connection cable RS 232-C ro on , in su u
USB-interface adaptor for GTMU-IF, incl. configuration software
83
Temperature-measuring transducer -20mA, Pt100, 2- / 3- or -wire
Handheld instrument
for head and rail case mounting

Panel-mounted-resistance thermometer with measuring transducer RT 20
RT 20 - advantages:
low-price and robust (complete sealed - no pots, therefore vibration re-
sistant and long time stable)
freely programmable - extreme wide measuring range of -200 to 850 °C
(measuring span already from ≥ 25 °C)
selectable probe connection as 2- / 3- or -wire
high accuracy ( 0.1 )
large ambient temperature range (- 0 ... 85°C)

WK
error message in case of sensor damage or sensor short-circuit
functional warranty 5 years
1
RT 20 / WE Specification:
head transmitter, set by our works Measuring range: -200 ... +850 °C, universally programmable
Measuring span: 25 to 1050 K
Rail adapter upcharge: . Zero shift: -200 ... +825 °C
for snap-on the RT 20 to top-hat rail Resolution: 14 bit
Sensor connection: 2-, 3- or 4-wire connection
Logger / EASYBus
1
RT 20 - SG / WE Meas. current: < 0,3 mA
set by our works and mounted in snap-on rail housing Perm. resistance of connection cable: max. 20 Ohm / wire
Compensation for cable error: ±0,02 K / Ohm (at 3-wire)
1
Ordering data required: Sensor monitoring: monitoring for sensor damage and short-circuit
1. required probe connection (2- / 3- or -wire) Meas. cycle: < 700 ms
2. measuring range from / to (max. range: -200 ... +850 °C) Linearisation: linear to temperature cc to 0 5
Accuracy: ±0.25 °C or ±0.1% of meas. span
Order exampley: RT420 / WE, 4-wire, 0...50 °C
Temperature effect: < ±0.01% / 1K
RT420-SG / WE, 3-wire, -50...+150 °C
Analog output: 4 20 mA, 2-wire technology
Accuracy output: <0.1% of signal span
RT 20 with
Auxiliary energy: s 8 35 V DC (max. ripple factor: 3Vss @ 50/60Hz)
rail adapter
RA ≤ ( s - 8 V) / 0,023 A RA in Ohm, s in V
Transmitter
Perm. burden A:
Effect of aux. energy: ±0.01 % / V
Power-on time: 10 s
Damping: adjustable from 0 to 30 s
GTF103 / RT 20 (p.r.t. page 113) Output limits: programmable, 3.5 mA, 23 mA
Panel-mounted resistance thermometer Signal for sensor damage: programmable, 3.5mA or 23mA
Pt100 cpl. with measuring transducer RT420 - transducer and Pt100 can Operating temperature: -40 +85 °C
be taken out in form of an insert. (Price valid for standard length 100 mm
Relative humidity: 0... 98 %RH, (non condensing)
and temperature range as to customers specification between -50 ... +400 °C)
Storage temperature: -55 +90 °C
pecial designs upon re uest - please contact us!
Electromagnetic compatibility (EMC):
Temperature probe
conforming to acc. to DIN EN 61326

GTF103/RT 20 Housing: housing suitable for head mounting
Dimensions: Ø 44 mm x 19 mm
IP rating: Housing: IP40,
connection terminals: IP10
Electric connection: via screw-type terminals
Alu-head or Weight: approx. 35 g
plastic
(upon request)) Design type ...-SG (snap-on rail housing)
RT 20-insert
with Pt100-sensor of Dimensions: approx. 22.5 x 78 x 105 mm
a GTF103/RT 20 Electric connection: via screw-type terminals
Alarm / Protection
6
Accessories:
Programming tool for RT 20
FL
The configuration set contains: configuration software, connec-

tion cable RS 232-C, battery plug, connection cable and operating
manual
For easy storage management at customers site (customer
WK
programmability - all ranges and wiring options can be fully
utilised)
8
Programmable electrically isolated 4-20 mA
Handheld instrument
universal transmitter GITT01
GITT01 1 universally programmable for
- resistance thermometers
1
GITT01 - E - thermocouples
(Ex-protection: ATE II 1G Ex ia IIC T /T5 /T4)
- resistance sensor WK
1
Transmitter can either be programmed by customer or - voltage sensor
by our works - please specify type upon order.
(e.g. GITT01, NiCr-Ni (type K), 4...20mA = 0 - 300°C) electrically isolated
output linear to temperatur
Accessories:
Rail adapter high accuracy for the entire ambient temperature
(rail adapter for snap-on to top-hat rail) range (-40... 5°C)
Programming tool for GITT01 available with - protection
The programming tool consists of: configurations software, error messages in case of sensor damage or
connection cable RS 232-C ro on , in su u
short-circuit settings acc. to NAM R NE43
• configuration can be carried out during measuring
Logger / EASYBus
Specification:
Input signal: can be universally programmed to Output signal: 4 20 mA or 20...4 mA, 2-wire technology
- Resistance thermometer: ma . meas. range min. meas. span Linearisation: temperature linear, resistance linear or
Pt100 acc. to IEC 751 -200 ... +850 °C 10 K voltage linear
Pt500 acc. to IEC 751 -200 ... +250 °C 10 K Auxiliary energy: s 8 30 V DC (max.ripple factor: 5Vss for Vs>13V)
Pt1000 acc. to IEC 751 -200 ... +250 °C 10 K Electr. isolation (E/O): = 3.75 KV AC
Ni100 acc. to DIN 43760 -60 ... +250 °C 10 K
Perm. load A: RA ≤ ( s - 8 V) / 0,022 A RA in Ohm, s in V
Ni500 acc. to DIN 43760 -60 ... +150 °C 10 K
Supply effects: ≤ ±0.01% / V deviation from 24V
Ni1000 acc. to DIN 43760 -60 ... +150 °C 10 K
- Thermocouples: Load effect: ≤ ±0.02% / 100 Ohm
Type B, PtRh30-PtRh6 0 ... +1820 °C 500 K Digital filter: 0 to 60 s, configurable
Type C,W5Re-W26Re (ASTME 988) 0 ... +2320 °C 500 K Switch-on delay: approx. 4 s
Type D,W3Re-W25Re (ASTME 988) 0 ... +2495 °C 500 K Response time: 1s
Transmitter
Type E, NiCr-CuNi -270 ... +1000 °C 50 K Output limits: 3.8 ... 20.5 mA
Type J, Fe-CuNi (acc. to IEC 584) -210 ... +1200 °C 50 K Signal in case of sensor damage: 3.6 mA or ≥21.0 mA, configurable
Type K, NiCr-Ni -270 ... +1372 °C 50 K
EMC: Interference immunity and emission acc. to
Type L, Fe-CuNi (acc. to DIN 43710) -200 ... + 900 °C 50 K
EN 61326-1 and NAMUR NE21
Type N,NiCrSi-NiSi -270 ... +1300 °C 50 K
Type R,Pt13Rh-Pt -50 ... +1768 °C 500 K Operating temperature: -40 +85 °C
Type S, Pt10Rh-Pt -50 ... +1768 °C 500 K Climate class: acc. to EN 60654-1, cl. C;
Type T, Cu-CuNi (acc. to IEC 584) -270 ... + 400 °C 50 K condensation permissible
Type U,Cu-CuNi (acc. to DIN 43710) -200 ... + 600 °C 50 K Vibration strength: 4 g / 2...150 Hz acc. to IEC 60 068-2-6
MoRe5-MoRe41 0 ... +2000 °C 500 K Electric connection: via terminals,
Temperature probe
- Resistance-type sensor: ma . meas. range min. meas. span cross section of connection terminals max. 1.75 mm
Resistance 10 ... 400 Ohm 10 Ohm Housing: PC-housing, suitable for installation in
Resistance 10 ... 2000 Ohm 10 Ohm connection head acc. to DIN 43729 form B.
- Voltage sensor: ma . meas. range min. meas. span Dimensions: Ø 44 mm x 21 mm
Voltage -10 ... 100 mV 5 mV IP-rating housing: IP54, connection terminals: IP00
Resistance thermometer: Weight: approx. 40 g
Sensor connection: 2-, 3- or 4-wire connection
Meas. current: < 0,6 mA Ex-approved: ATEX II 1G Ex ia IIC T6/T5 /T4
Max. perm. line resistance: 11 Ohm / line Power suplly set: Ui ≤ 30 V DC, Ii ≤ 100 mA, Pi ≤ 750 mW
Accuracy: Pt100, Ni100: ±0.2°C or ±0.08% of meas. span
Ci, Li = negligibly small
Pt500, Ni500: ±0.4°C or ±0.16% of meas. span Meas. circuit: Uo ≤ 8.2 V DC, Io ≤ 4.6 mA, Po ≤ 9.35 mW
Pt1000, Ni1000: ±0.2°C or ±0.08% of meas. span Max. connection values: Lo = 4.5 mH (ia IIC), 8.5 mA (ia IIB)
Alarm / Protection
Temperature effect: Td = ± (15ppm/K * max. meas. range + 50ppm/K * meas. span) Co = 974 nF (ia IIC), 1900 nF (ia IIB)
Thermocouples :
Sensor connection: 2-wire connection
Sensor current: < 350 nA
Accuracy (typ.): ±0.5K (types: K, J, E, L, U), ±1.0K (types: N, C, D),
±2.0K (types: S, B, R, MoRe5-MoRe41)
C C: Pt100 internal or external (0...80°C)
C C accuracy: ±1°C
Temperature effect: Td = ± (50ppm/K * max. meas. range + 50ppm/K * meas. span)
5
Temperature transmitter Isolating signal converter
(electrically isolated)
Handheld instrument
WK
MU 500 - 51 - ... (Pt100) ST 500 - Ex - 10 - 0 - 00 (230 V AC)

MU 500 - 53 - ... (Pt1000) ST 500 - Ex - 10 - 5 - 00 (10..30 V DC/AC)
MU 500 - Ex - 51 - ... (Pt100)
MU 500 - Ex - 53 - ... (Pt1000)
Electrically isolated: between input / output / supply voltage Isolating signal converter for application in zone 0 or zone 20 (constant explo-
2 power-supply-designs with wide range of allowed supply voltage: sion risk) with integrated transmitter supply. It allows the direct connection of
active 2-wire sensors (4 ... 20 mA) and 3-wire sensors in the Ex-area.
Logger / EASYBus
10 ... 30 V DC / 10 ... 42 V AC or 85 ... 265 V AC / 110 ... 125 V DC

22.5 mm standard case for rail mounting TS35
Input intrinsically safe ATEX II (1) G Ex ia IIC, II (1) D Ex iaD
Several measuring ranges, selectable via rotary switch at front panel
2 power-supply-designs with wide range of allowed supply voltage:
(13 for Pt100, 16 for Pt1000)
10 ... 30 V DC / AC oder 85 ... 253 V AC
Offset and span adjustable
Electrically isolated: between input / output / supply voltage
For Ex-designs: 22.5 mm standard case for rail mounting TS35
Input intrinsically safe ATEX II (1) G Ex ia IIC, II (1) D Ex iaD Universal inputs/outputs for (0)4 ... 20 mA and 0(2) ... 10 V
Burden: max. 1000 Ω
Measuring ranges: selectable via rotary switch Measuring ranges: selectable
Pt100: -50 ... 0, -50 ... 50, -30 ... 20, -30 ... 70, -20 ... 30, Current input: 0 ... 20 mA or 4 ... 20 mA
-20 ... 80, 0 ... 50, 0 ... 100, 0 ... 150, 0 ... 200, (Ri = 25 Ω, max. 100 mA overload)
0 ... 300, 0 ... 450, 0 ... 600 °C Voltage input: 0 ... 10 V or 2 ... 10 V
Transmitter
Pt1000: -50 ... 0, -50 ... 50, -30 ... -20, -30 ... -10, -20 ... -10, (Ri = ~ 40 kΩ, max. 100 V overload)
-20 ... 0, -10 ... 0, -10 ... 10, 0 ... 10, 0 ... 20, 0 ... 30, Span: approx. ±20 %, adjustable
0 ... 40, 0 ... 50, 0 ... 100, 0 ... 150, 0 ... 200 °C Transmitter supply: approx. 20 V DC, Ri = approx. 300 Ω
Offset adjust: offset: approx. ±8 Ω (≙ 20 °C for Pt100, ≙ 2 °C for Pt1000)
span: approx. ±20 % Output signal: 0 - 20 mA, 4 - 20 mA, 0 - 10 V or 2 - 10 V
Sensor connection: 2- or 3-wire connection (selectable via D P switch)
Sensor current: approx. 1 mA (Pt100), approx. 0.25 mA (Pt1000) max. load: burden ≤1 kΩ (at mA), load: max. 15 mA (at V)
Output signal: 0 - 20 mA, 4 - 20 mA, 0 - 10 V or 2 - 10 V Basic accuracy: ≤0.3 % of measuring range

(selectable via D P switch) Temperature coefficient: ≤0.01 %/K
max. load: burden ≤1 kΩ (at mA), load: max. 15 mA (at V) Repeat accuracy: ≤0.1 % of measuring range
Rise time: T90 = < 100 ms
Temperature probe
Basic accuracy: ≤0.2 % of measuring range

Temperature coefficient: ≤0.01 %/K Power supply: ... - 0 - 00 85 ... 253 V AC
Output accuracy: ≤0.1 % of measuring range ... - 5 - 00 10 ... 30 V DC / AC
Power consumption: max. 3.5 VA
Power supply: ... - 0 - 00 85 ... 265 V AC / 110 ... 125 V DC Isolation voltage: 500 V AC, according to VDE 0110 Gr. 2
... - 5 - 00 10 ... 42 V DC / 10 ... 30 V AC between input/output/supply voltage
Power consumption: max. 2.2 W / 3.3 VA Test voltage: 4 kV DC between input/output/supply voltage
Isolation voltage: 500 V AC, according to VDE 0110 Gr. 2
between input/output/supply voltage Working temperature: -10 .. 55 °C
Test voltage: 4 kV DC between input/output/supply voltage Electrical connection: screw-terminals with pressure plates, max. 2.5 mm
Dimensions: 22.5 x 75 x 110 mm (W x D x H)
Working temperature: -10 .. 60 °C Protection: IP 30 (case), IP 20 (terminals)
Electrical connection: screw-terminals with pressure plates, max. 2.5 mm
Dimensions: 22.5 x 75 x 110 mm (W x D x H) Ex-certification: T V 97 ATEX 1150, II (1) G Ex ia IIC, II (1) D Ex iaD
Alarm / Protection
Protection: IP 30 (case), IP 20 (terminals) Connection data: U0 = 25.2 V, I0 = 95 mA, P0 = 600 mW,

C0 / L0 (ia/IIC) = 47 nF / 2 mH or 107 nF / 0.2 mH,
Ex-certification: T V 03 ATEX 2283, II (1) G Ex ia IIC, II (1) D Ex iaD C0 / L0 (ia/IIB) = 370 nF / 15 mH or 430 nF / 1 mH,
Connection data: Ci, Li = negligible
MU 500-ex-ia-51-..: U0 = 1.3 V, I0 = <3 mA, P0 = <3 mW, C0 = 29 µF, The intrinsically safe circuit is electrically
L0 = 100 mA, Ci = 5 nF, Li = 0 mH isolated from the non-intrinsically safe circuits
MU 500-ex-ia-53-..: U0 = 4.9 V, I0 = <3 mA, P0 = <3 mW, C0 = 2.2 µF, up to a sum of the peak values of the nominal
L0 = 100 mA, Ci = 5 nF, Li = 0 mH voltage of 375V.
Ordering example
MU 500 - 53 - 5 - 00 : input = Pt1000, power supply: 10 ... 42 V DC / 10 ... 30 V AC
86
Infrared - measuring transducer IR-CT 20 Temperature
Handheld instrument
non-contact temperature measuring from - 0 to 900°C
Switch
● one of the smallest infrared
sensor heads with 20:1 optical
resolution
● rugged and applicable without
cooling up to 180°C ambient
● adjustable emission factor
W
● freely scaleable analogue out- NE
put 0( )-20mA, 0-10V, thermo-
couple type or K
● illuminated liquid crystal display
● large range of supply voltage
Precision infrared transducer TF1 ...

IR-CT 20 - 0 ... 900°C, optic 20:1 General
A totally sealed bimetal thermostat opens or
Scope of supply: electronics-box with LCD, stainless steel sensor head (M12)
closes when the pre-fixed switch value is over-
incl. screw nut, 1m high temperature sensor head cable, manual rated or undercut.
Logger / EASYBus
Specification Sensor has to be fully wetted. Switch value is
Measuring range: -40 ... +900°C IP rating: IP65 (NEMA-4) indicated for increasing temperature 2K/min.
freely scaleable via pro- Ambient temperature:
gramming keys Measuring head: -20 ... +180°C TRM thermostats just monitor the temperature.
Spectral sensitivity: 8 - 14 µm Electronic box: 0 ... +65°C A regulation is due to the huge hysteresis not
Optic resolution: 20:1 (precision glass optics) Storage temperature: possible.
System accuracy: ± 1% or ±1°C Measuring head: -40 ... +180°C
(hi her ue ic e) Electronic box: -40 ... +85°C optional installation
Repeat accuracy: ±0,5% or ±0,5°C Relative humidity: 10 - 95%RH, non condensing compact dimensions
(hi her ue ic e) Vibration (meas. head): n.o. or n.c. position
Nominal temperature: 23 ± 5°C IEC 68-2-6: 3G, 11-200 Hz, each axis metering substances: water, gas/air, oil
Temperature coefficient: 0,05% or 0,05°C/K Shock (meas. head):
(hi her ue ic e) IEC 68-2-27: 50G, 11ms, each axis SpecificationsA
Temperature resolution: 0,1°C Weight (meas. head / elec. box): 40g / 420g Switch value: e l e e pl o e
Response time: 150 ms (95%) Dimensions electronic box: 120 x 70 x 30mm 40°C e TF1 40
Transmitter
Emission-, transmission factor: adjustable 50°C e TF1 50
from 0.100 to 1.100 60°C e TF1 60
Output signals: 0-20mA, 4-20mA, 0-5V, 0-10V 70°C e TF1 70
thermocouple type J or K 80°C e TF1 80
Output impedance: 90°C e TF1 90
mA max. 500Ohm (at 8-36VDC) 100°C e TF1 100
V min. 100 kOhm load resistance 110°C e TF1 110
Thermo couple: 20 Ohm 120°C e TF1 120
Supply voltage: 8 - 36 VDC 130°C e TF1 130
Power consumption: max. 100 mA urther special design types e.g. for metal Hysteresis: 10°C ±4°C
Cable length: 1m (standard), 3m, 15m processing or ith other optics up on re uest Accuracy: ±3°C
Temperature probe
Media Temp.: max. switch value + 50°C

ptic resolution standard ptic resolution ith option Connection: G1/2A male thread socket
brass
Basic data: PN 100 , tmax=100 ... 140°C
Electr. data: NO (NC upon request)
230 V AC, 10 A
plug DIN 43650-A
Weight: 120 g
meas. one
meas. one
distance
distance
Option Mechanical accessories

Alarm / Protection
- CB3 3m sensor head cable - MW mounting bracket, fixed

- CB15 15m sensor head cable - MB mounting bolts
- CF auxiliary lens for with M12x1 thread
measuring of smallest objects - MG mounting fork,
measuring zone dia 0,6mm @10mm, in long distance 1,5:1 adjustable in 2 axis with M12x1
mount
Calibration
- FVS standard blow clear header
- WPS calibration certificate
23°C, 110°C, 510°C - FVL laminar blow clear header
87
humidity and humidity/temperature transducer
Handheld instrument
GRH ... MP and GHT ... MP

General Design types
The newest generation of humidity/temperature transducer offers even greater pos-
sibilities to compensate the special sensor characteristics due to the newest micro- Surface mounting Duct mounting Duct mounting
processor technology. Regarding precision, temperature stability and functionality a Sensor tube at the side Sensor tube at the side Sensor tube downwards
new dimension is entered. Tube Length: 50mm Tube Length: 220mm Tube Length: 220mm
The transducer can used for almost all applications due to the different types (e.g. wall
or channel mount, with separated probe or with heat absorption hat) and the wide Design type: ...-1R Design type: ...-1K Design type: ...-2K
temperature range (electronic: -25°C...+50°C; sensor: -40...+120°C).
on-site display for humidity and temperature

output ranges freely scaleable
temperature range up to 120°C
ad ustment by operator possible
output signals for humidity and temperature are electrically isolated
available output signals: 4-20mA 0-1V or 0-10V
Specification
Measuring ranges:
Humidity: 0,0 ... 100,0 %RH (temperature compensated)
Temperature: -40,0 ... 120,0 °C or -40,0 ... 248 °F
Logger / EASYBus
Recommended humidty range: 20,0 ... 80,0 %RH (standard)

5,0 ... 95,0 %RH (with option high humidtiy) WK
Display options: with option an alternative display unit can be shown instead of
the humidity measuring value. he unit selection will be done via
the interface or at the eyboard.
Prices - humidity transducer
Wet bulb temperature -27,0 ... 60,0 °C
Dewpoint temperature -40,0 ... 60,0 °C GRH - 1R - MP (sensor tube at the side, FL = 50mm)
Enthalpy -25,0 ... 999,9 kJ/kg
GRH - 1K - MP (sensor tube at the side, FL = 220mm)
Atmospheric humidity 0,0 ... 640,0 g/kg
absolute humidity 0,0 ... 200,0 g/m³ GRH - 2K - MP (sensor tube pointing downwards, FL = 220mm)
Accuracy: (at 25°C and in recommended range)
Display: humidity ±2,5 %RH Prices - humidity / temperature transducer
temperature: ±0,4 % of meas. value ±0,2 °C GHT - 1R - MP (sensor tube at the side, FL = 50mm)
Add. output signal: each ±0,2 % FS
GHT - 1K - MP (sensor tube at the side, FL = 220mm)
Temperature compensation: automatically
GHT - 2K - MP (sensor tube pointing downwards, FL = 220mm)
Transmitter
Output signal: GRH 1 x 4-20mA (2-wire), freely scaleable

GHT 2 x 4-20mA (2-wire), freely scaleable
option: 0-1V, 0-10V (other output signals upon request) Options / upcharges
Connection: 4 - 20 mA (2-wire) note for GHTU: - HO: High-humidity sensor upcharge:
output signals are electrically isolated from each other
(for humidity measuring < 20 %RH and > 80 %RH)
ote pon ordering the range of application can be stated, for this the device will be
for option AV01, AV10: 0 - 1 (10) VDC (3-wire) note for GHTU:
optimised free of charge (e.g. 10-40 or 0-90 ).
output signals are not electrically isolated from each other
for option AV01G, AV10G: 0 - 1 (10) VDC (3- or 4-wire) note for GHTU: - NI: selectable humidity display unit upcharge:
output signals are electrically isolated from each other
- LACK: Encapsulated PC board upcharge:
Auxiliary energy: 12 ... 30 VDC or 18 ... 30VDC (for output 0-10V) (for outdoor application, i.e. applications where condensation is possible)
Reverse voltage protection: 50V, permanently
- L300 L400 L500: upcharge:
Perm. impedance (at 4-20mA): RA [Ω] = (Uv [V] - 12V) / 0.02 A (Extra long sensor tube - no interim lengths possible)
Temperature probe
Permissible load (at 0-1(10)V): RL [Ω > 3000Ω - AV01: output signal 0-1V (note: please refer to connection) upcharge:
Display: approx. 10 mm high, 4-digit LCD-display, - AV01G: output signal 0-1V (note: please refer to connection) upcharge:
alternating humidity and temperature display
- AV10: output signal 0-10V (note: please refer to connection) upcharge:
Working temperature: -25 to 50°C (electronics)
Sensor head and tube: -40 to 100°C - for short time up to 120°C - AV10G: output signal 0-10V (note: please refer to connection) upcharge:
Storage temperature: -25 to 70°C - KABEL: with separated sensor tube upcharge:
Relative humidity (electronic): 0 to 95 %RH (non-condensing) Sensor tube (Ø14x 68mm) connected to device via 1m teflon cable.
If there is a risk of condensation due to temperature Inclusive option high-humidty sensor
changes, please use our encapsulated or lacquered types ( rdering note specifying the design type (e.g. -1R) is unnecessary)
(optionally available). - SH T: heat absorption hat / weather protection shield upcharge:
Housing: ABS (IP65) ( rdering note specifying the design type (e.g. -1R) is unnecessary)
Sensor tube: tube 14 mm Ø, with screw-type protection cap Application:
Sensor length: 50 mm (...1R) or 220 mm (...1K, ...2K) The heat absorption hat is especially designed for meas-
option: 300mm, 400mm, 500mm urements in the open air. The measuring results that can
Alarm / Protection
be achieved will not be influenced by either sun or rain.

Electric connection: elbow-type plug acc. to DIN 43650 (IP65),
Mounting: 4 housing holes for wall mounting or Design:
by means of plastic tube clamps for duct mounting Heat absorption hat made of plastic, dia 110 mm, approx.
140 mm high. Additionally equipped with a stainless steel
unctions: min-/max-value memory,
base for wall mounting, with 3 fixing holes for screws with a
offset and slope adjustable, max. shaft Ø of 5 mm. Large projection approx. 160 mm.
output signal scaleable
Order code (examples) Spare / accessory parts
GHT -2K-MP / AV10 L300: GHTU-2K-MP, 0-10V, FL = 300 mm Spare protection cap with stainless steel gauze
(105µm mesh size) - for standard and high humidity use
GRH -MP / KABEL HO: GRHU-MP, with separated sensor tube and high humidity sensor
Bronze filter (not for use in high humidty)
Pressure measuring transducer pressure measuring transducer
for absolute pressure, over/under pressure and
...20 mA or 0...10 V
Handheld instrument
pressure difference
WK
WK
picture shows relative pres. D
GMUD standard pressure range GMDP standard pressure range
GMUD fine pressure range (0 to 1 ... 25 mbar) GMDP fine pressure range (0 to 1 ... 25 mbar)
Application: for air, non-corrosive, non oxidising and non-reducing gases Application: for air, non-corrosive, non oxidising and non-reducing gases
and liquids. Not suitable for water! Suitable for controlling, measuring and and liquids. Not suitable for water! Suitable for controlling, measuring and
monitoring on the climatic/ventilation, environmental and medical technol- monitoring on the climatic/ventilation, environmental and medical technol-
ogy sector. For use in water an air cushion or hydrophobic filter is required ogy sector.
- please contact us. Types of pressure: ABSOLUTE PRESSURE (vacuum used as reference)
Types of pressure: ABSOLUTE PRESSURE (vacuum used as reference) for measuring over pressure over absolute zero (sensor displaying baro-
for measuring over pressure over absolute zero (sensor displaying barometric air pressure when coming into contact with atmospheric pressure).
Logger / EASYBus
metric air pressure when coming into contact with atmospheric pressure). RELATIVE PRESSURE (reference atmosphere or ambient pressure) for over/
RELATIVE PRESSURE (reference atmosphere or ambient pressure) for over/ under pressure measurements and pressure difference measurements. (Sensor
under pressure measurements and pressure difference measurements. (Sensor displaying zero when coming into contact with atmospheric or ambient pressure).
displaying zero when coming into contact with atmospheric or ambient pressure).
Specification:
Specification: Sensor element: piezoresistive pressure sensor with integrated tempera-
Sensor element: piezoresistive pressure sensor with integrated temperature compensation 0 to 70°C
ture compensation 0 to 70°C Measuring ranges: (standard)
Measuring ranges: (standard) Absolute pressure: 0 to 1100 mbar
Absolute pressure: 0 to 1100 mbar (e.g. barometric air pressure) 0 to 2 bar
0 to 2 bar 0 to 7 bar
0 to 7 bar Relative pressure: 0 to 70 mbar
Relative pressure: 0 to 70 mbar 0 to 2 bar
0 to 2 bar 0 to 10 bar
0 to 10 bar OPTION: any intermediate values (under pressure also possible) against
OPTION: any intermediate values upon request upcharge available upon request: e.g. ±1bar, 0 bis 350mbar, 0 to 10mbar, etc.
Transmitter
Overload and bursting pressure: Overload and bursting pressure:
Meas. range: 70 mbar 1100 mbar 2 bar 7 bar / 10 bar Meas. range: 70 mbar 1100 mbar 2 bar 7 bar / 10 bar
Overload: 1,3 bar 2 bar 4 bar 10,34 bar Overload: 1,3 bar 2 bar 4 bar 10,34 bar
Typ. accuracies: Sensor accuracy (typ. values):
±0.2% FS (hysteresis and linearity), ±0.4% FS (temperature effect 0 - 50°C) ±0.2% FS (hyst. and linearity), ±0.4% FS (temperature effect from 0 to 50°C)
at meas. range < 25mbar: ±0.6% FS (temperature effect 0 to 50°C) at meas. range < 25mbar: ±0.6% FS (temperature effect 0 to 50°C)
OPTION: double accuracy for meas. range >25 mbar - against upcharge OPTION: double accuracy for meas. range >25 mbar - against upcharge
Output signal: 4 - 20 mA (0-10V against upcharge) Output signal: 4 - 20 mA (0-10V against upcharge)
Auxiliary energy: Vs = 12 ... 30 V DC (at 0-10V: Vs = 18 ... 30 V DC) Auxiliary energy: Vs = 12 ... 30 V DC (at 0-10V: Vs = 18 ... 30 V DC)
Permissible impedance (at 4-20mA): RA Ω] = (Vs [V] - 12V) / 0.02A Permissible impedance (at 4-20mA): RA Ω] = (Vs [V] - 12V) / 0.02A
Permissible load (at 0-10Volt): RL Ω] > 3000Ω Permissible load (at 0-10Volt): RL Ω] > 3000Ω
Temperature probe
Operating temperature: 0 ... +70 °C Operating temperature: 0 ... +70 °C

Storage temperature: -45 ... +70 °C Storage temperature: -45 ... +70 °C
Pressure connection: 1 (at abs.) bzw. 2 (at rel.) metal connection pieces Relative humidity: 0 ... 80 % r.h. (non-condensing)
(nickel plated) for plastic tube 6 x 4 mm (4 mm inner diameter) Pressure connection: 2 plastic connection pieces for plastic tube
6 x 4 mm (4 mm inner diameter)
Mounting position: any position (small ranges up to 10 mbar depending on position)
Mounting position: any position (small ranges up to 10 mbar depending on position)
Housing: ABS (IP65)
Design-type: electronic PC board cpl. with sensor, 56 x 70 x 33 mm (BxHxT)
Fixing: by means of fixing holes for wall mounting (accessible after cover
Mounting: 4 holes, 3.5 mm Ø each
has been removed)
Mounting distance: 43,5 x 58 mm (W x H)
Mounting distance: 70 x 50 mm (H x W)
Electric connection: screw-type/plug-in terminal
Fixing screws: max. shaft Ø 4 mm
Electric connection: elbow-type plug conforming to DIN 43650 (IP65) Order code:
max. wire cross section 1.5 mm2, wire/cable Ø from 4.5 mm to max. 7 mm GMDP 0...1100 mbar abs. / DSG:
GMDP, 4-20mA = 0...1100 mbar abs., double sensor accuracy
Prices options:
Alarm / Protection
GMDP -1.. 10 bar rel. / AV010, LACK:

AV010: option output signal 0-10V upcharge: GMDP, 0-10V = -1 to 10 bar rel., encapsulated PC board
MB...: option any measuring range upcharge:
(please state desired measuring range - no upcharge at fine pressure ranges) Prices, options:
LACK: option "encapsulated PC board" upcharge: AV010: option output signal 0-10V upcharge:
(for outdoor application) MB...: option any measuring range upcharge:
DSG: option double sensor accuracy upcharge: (please state desired measuring range - no upcharge at fine pressure ranges)
(not possible for high-precision range!) LACK: option "encapsulated PC board" upcharge:
VO: option on-site display upcharge: DSG: option double sensor accuracy upcharge:
(for output signal 4-20mA, auxiliary energy Uv = 17 ... 30 V DC) (not possible for high-precision range!)
For suitable tubes, accessories p.r.t. page 22 and 23 For suitable tubes, accessories p.r.t. page 22 and 23
89
Water level / well probe Pressure transmitter
Tank contents meas. probe
Handheld instrument
GBS 01
sealing
For simple and inexpensive applications. Suitable for permanent level
measuring in tanks, rivers, lakes, drinking-water wells, drilling holes, WK
waste water plants...
GBS 02 A-10
For measuring the level of fuel and other aggressive media. (relative pressure, ero output at atmospheric pressure)
The sensor is highly precise, insensitive to lateral flow and offers
optionally lightning protection and other output signals (e.g. 0-10V). Option: Absolute Pressure
For measuring of gasoline please order ex-design. (0...1bar abs. to 0...25bar abs.)
Description: piezoresistive pressure sensor with temperature compensa- Option: Under Pressure
Logger / EASYBus
tion. Welded, non-corrosive design with integral and additionally sealed

water-proof connecting cable. (-1,0 ... 1,5 bar, -1,0 ... 3,0 bar, -1,0 ... 9,0 bar
The pressure compensation is done via a cable-integrated air path to the
General application: Suitable for all applications in machine and systems
atmosphere. Possible cable lengths up to 300 m. A special feature is the
engineering, automotive technology as well as cooling and air conditioning
lateral flow resistance, which prevents media ingress. Therefore only the technology.
cable has to be replaced in case of a corresponding defect, while sensor is
still unharmed. Specification:
Measuring range (MR), Overload limit (OL), Burst pressure (BD):
Specification: MR: 1, 1.6, 2.5, 4, 6, 10, 16, 25, 40, 60, 100, 160, 250, 400, 600
Meas. reanges: 0.1 bar (100 mbar) to 25 bar = 1 to 250 m water column OL: 2 3.2 5 8 12 20 32 50 80 120 200 320 500 800 1200
Available ranges: 0.1, 0.25, 0.4, 0.5, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25 BD: 5 10 10 17 34 34 100 100 400 550 800 1000 1200 1700 2400
Overload (bar): 1 2 2 2 4 5 10 10 17 35 35 80 80
Output signal: 4-20mA, 2-wire, RA Ω < (Uv [V] - 8V) / 0.02 A
Output signal: 4-20 mA (option: 0-10 V only for GBS02) 0-10V, 3-wire, RA > 10 kΩ
Permissible impedance: 4-20 mA: RA Ω < (Vs [V] - 10 V) / 0.02 A (other output signals upon re uest)
0-10 V: RA Ω] > 10 0kOhm Auxiliary energy: 8...30VDC (for output 4-20 mA)
Transmitter
Auxiliary energy: 10...30 V DC (14...30 V DC at 0-10 V), others upon request 14...30VDC (for output 0-10V)
Accuracy: Accuracy: * < 1,0 % FS (optional: < 0,5 % FS)
GBS01: accuracy (% of span): < 0,5 (setting of cut-off point) resp. ( including non-linearity, hysteresis, ero point and scale error. orressponds to error of measurement
< 0,25 (BFSL) per 1 9 - . ensor ad usted in vertical mounting position wirh lower pressure connection)
GBS02: accuracy (% of span): < 0,25 (setting of cut-off point) resp. Non-Linearity: < 0,5 % FS (optional: < 0,25 % FS)
< 0,125 (BFSL) Zero Offset: < 0,5 % FS (typ.), < 0,8 % FS (max.),
(The accuracy of the pressure ranges 0.1 and 0.25bar correspond with the type GBS01) (optional: < 0,15 % FS (typ.), < 0,4 % FS (max.))
Hysteresis (% of span): < 0,1 Hysteresis: < 0,16 % FS
Repeatabilty (% of span): < 0,05 Repeatability: < 0,1 % FS
Stability per year (% of span): < 0,2 (at reference conditions) Long-term drift: < 0,1 % FS (according to IEC 61298-3)
Operating temperature: -10...+60 °C (GBS01) or -10...+85°C (GBS02) Response time: T90 < 4 ms
Temperature probe
Temperature coefficient (% of span): < 0,02 / K (for meas. range > 0.4bar) Perm. temperature of meas. media: 0 ... +80 °C (optional: -30 ... +85 °C)
Filling: KN77, food safe Ambient temperature: 0 ... +80 °C (optional: -20 ... +80 °C)
Housing: chromium-nickel alloy 1.4571. Storage temperature: -20 ... +80 °C
Male thread G 1/2" accessible after removal of plastic protection cap. Temperature compensated area: 0 ... +80 °C
Probe dimensions: Ø 27 mm, length of metal body: approx. 100 mm Temperature error in comp. area: < 1.0 % FS (typ.), < 2.5 % FS (typ.)
(GBS01), approx. 147 mm (GBS02), cable Ø approx. 7.5 mm Material: Parts coming into contact with pres. media
Electric connection: 10 m stationary casted PUR cable (GBS01) resp. - Pressure connection: 316 L
FEP-cable (GBS02). Glass-fibre screen protects cable against tearing. - Pressure sensor: 316 L (as of 10bar rel. 13-8 PH)
(Extra long cable against upcharge - please specify when ordering) Housing: 316 L
Pressure connection: G ¼ A, DIN 3852-E with NBR sealing
Options GBS01: Protection rating: IP65 resp. IP67 with cable
Electric connection: elbow-type plug acc. to DIN 43650 or
extra long connection cable (PUR) connection cable, cable length 2m
Alarm / Protection
Electric protections: reverse voltage and short-circuit protection

Optionen GBS02: Weight: approx. 150 g
extra long con. cable (FEP, teflon)
Options, Accessories:
lightning protextion
Higher sensor accuracy (class 0,5)
output signal 0-10 V
Extended temperature range
Ex-protection, one 0 Output signal 0-10 V
Fixed connecting cable, 2 m with bend protection
(instead of elbow-type plug, IP67)
GWA121 V4A thread adapter G½"
with internal thread G¼" and external thread G½"
90
Pressure measuring transducer Pressure Accessories
for over/under and absolute pressure
Handheld instrument
Tube, Tube clips, Adapter, Couplings, etc.
Types:
S-10 REL, S-10 ABS GDZ-01 = PVC-tube 6/4 (6 mm outside-Ø, 4 mm inside-Ø)
(5 bar @ 23°C)
Types: GDZ-2 = PVC-tube 10/7 (10 mm outside-Ø, 7 mm inside-Ø)
S-11 REL, S-11 ABS
(5 bar @ 23°C)
GDZ-02 = PE (polyethylene) 6/4
(6 mm outside-Ø, 4 mm inside-Ø) (10 bar @ 23°C)
GDZ-03 = PUR (polyurethane) 6/4
(6 mm outside-Ø, 4 mm inside-Ø) ( 9 bar @ 23°C)
GDZ-0 = PA (polyamide) 6/4
(6 mm outside-Ø, 4 mm inside-Ø) (25 bar @ 23°C)
GDZ-05 = Screw-type glanding for 6/4 tube
with outside thread G1/8"
GDZ-06 = Increaser glanding for 6/4 tube with inside thread G1/8"
GDZ-07 = Double reducer for tubes with 6 inside-Ø to 6/4 tube
GDZ-08 = Double adapter for 6/4 tube to 6/4 tube
1) G½A = SW27
G1A = SW41 GDZ-09 = Coupling adapter (NW5) made of brass
WK with inside thread G1/4" (suitable for D -1 )
SW27 or SW41 GDZ-10 = Coupling adapter (NW5) made of brass
(refer 1))
for tube with 6mm inside-Ø (suitable for D -1 )
GDZ-11 = Coupling adapter (NW5) made of brass
with outside thread G1/4" (suitable for D -1 )
GDZ-12 = Coupler socket (NW5) made of brass
S-10 REL (single-hand use) with inside thread G1/4"
GDZ-17 = Screw-in connection for 6/4 tube
(Standard, ero output at ambient pressure)
with outside thread G1/4"
S-11 REL
Logger / EASYBus
(Flush, ero output at ambient pressure)
(8mm outside-Ø and 6mm inside-Ø)
S-10 ABS GDZ-21 = T-piece for 6/4 tubes
GDZ-25 = Luer-Lock male to 6/4 tube
(Standard, absolute, ero output at vacuum)
GDZ-26 = Luer-Lock female to 6/4 tube
S-11 ABS GDZ-29 = Filter-Membrane incl. Luer-Locks
(GDZ-25 and GDZ-26) (without picture)
(Flush, absolute, ero output at vacuum)
GOG-N = needle, Ø 0.9 mm - suitable to Luer-Lock male
Description: piezoresistive pressure sensor with temperature compen-sa- (5 pieces) (without picture)
tion. Completely welded and stainless steel design, filled food safe (up to
16 bar), thin film strain (above 25 bar).
Specification:
Meas. ranges: in bar (other values upon request) 24
S-10 REL and S-11REL: 0.1, 0.16, 0.25, 0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16,
Transmitter
25, 40, 60, 100, 160, 250, 400, 600, 1000 1 5 17 6
S-10 ABS and S-11ABS: 0.25, 0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16
2
Measuring range (MB), Overload limit ( L): 9 10 11 12
MB (bar): 0.1, 0.16, 0.25, 0.4, 0.6, 1, 1.6, 2.5, 4, 6, 10, 16, 25 ... 600, 1000 3
ÜL (bar): 1 1.5 2 2 4 5 10 10 17 35 35 80 2x MB 1500
4
Output signal: 4-20 mA (0-10 V - refer to options; others upon request) 13
Permissible impedance: RA Ω] = (Uv [V] - 10 V) / 0.02 A (for output 4-20 mA) 14 15 16
RA Ω] > 10 kOhm (for output 0-10V) 7 8
Auxiliary energy: 10...30 V DC (14...30 V DC for output 0-10V) 21
Accuracy:
deviation from parameter (% of span): < 0,5 (setting of cut-off point)
Temperature probe
26 27
< 0,25 (setting of tolerance band, BFSL)
Repeatability (% of span): < 0,05
Stability / year (% of span): < 0,2 (at reference conditions) 25
19 28
Hysteresis (% of span): < 0,1 18 20 22 23
Permissible temperature of media: -30 ... +100 °C (refer to options)
Operating temperature ambient: -20...+80 °C Tube adapter, Couplings, etc.
Compensated temperature range: 0...+80 °C
GDZ-13 = Increaser/reducer made of brass with
Temperature coefficient: < 0.02% FS / K (or< 0.04 % FS for MB< 0.25 bar)
G1/2" outside thread and G1/8" inside thread
Filling: KN77, food safe
GDZ-1 = Screw-in nozzle for 6/4 tube
Housing: stainless steel 1.4435 (IP65) with outside thread G1/8"
Pressure connection: (other upon request) GDZ-15 = Screw-in nozzle for tube with 6 mm inside-Ø
Type S-10... : G½B with outside thread G1/4"
Type S-11... : G1B (up to 1.6 bar), G½B (from 2.5 to 600 bar)
GDZ-16 = Screw-in nozzle for 6/4 tube
Alarm / Protection
Mounting position: any with outside thread G1/4"

Electric connection: standard via elbow-type plug acc. to DIN 43650 GDZ-20 = Screw-on connection made of brass for 6/4 tube
Electric protections: reverse voltage protection, over voltage and short-circuit protection. with inside thread G1/4"
Options: GDZ-22 = Coupling adapter (NW5) made of brass
with tube connection 6/4 (suitable for D -1 )
Special measuring range upcharge: GDZ-23 = Adapter G1/2" inside thread to G1/4" outside
- 0... 125°C (media temperature) upcharge: thread, made of brass
-20... 150°C (media temperature, S-11 only) upcharge: GDZ-27 = Manometer profile gasket (thickness 3mm, Cu)
for thread G1/4"
Output signal 0-10V (other upon request) upcharge:
GDZ-28 = Flat gasket (thickness 1.5mm, Cu) for thread G1/4"
Ex-protection upon request GWA 121 = Adapter G1/2" inside thread to G1/4" outside thread
91
CO-Transducer CO2-Transducer
Handheld instrument
with TÜV certificate acc. to VDI 2053 for

CO surveillance systems in underground garages etc.
GT1 - CO GT10 - CO2 - 1R

High quality, TÜV certified CO transmitter for detection of carbon monoxide Due to the fact, that CO2 is an important indicator for the quality of air in
in underground garages, parking garages, boiler plants, heating systems, rooms, it‘s super important to measure the CO2 content.
garages as well as in the ambient air. The recommended CO2 limit value for ambient air is 1000ppm . An exceed-
The CO transducer has a very long-lasting electrochemical measuring cell ing of this limit causes tiredness and a loss of concentration.
and could be easily integrated in existing CO surveillance systems (without The high quality and precise CO2-transducer works according to the infra-
loss of validity of existing TÜV certificates). red principle (NDIR). An auto-calibration procedure compensates aging
Via two-wire system, displays, controller and alarm devices with 4-20 mA effects and is responsible for an excellent long term stability of this CO2
Logger / EASYBus
input could be connected without any problem. transducer.

Range of Application: Due to the freely adjustable output signal the transmitter could be used for
underground garages, parking garages nearly each existing controller input etc..
boiler plant and heating systems Additionally, there is a local display which shows beside the actual CO2
motorcar garage concentration, the minimum and maximum values as well as an optical
alarm.
Highlights:
TÜV certification according to VDI 2053 Highlights:
also suitable as replacement sensor for existing CO surveillance systems excellent long term stability
long-lasting electrochemical measuring cell auto-calibration procedure
automatic zero calibration for surveillance of the recommended CO2 concentration in ambient air
3 years warranty for the co sensor element output signal free scaleable
Transmitter
Measuring range: 0 ... 300 ppm CO (carbon monoxide) Meas. range: standard: 0 ... 2000 ppm CO2 (carbon dioxide)
Measuring principle: electrochemical, permanent measuring opt. /5000: 0 ... 5000 ppm CO2 (carbon dioxide)
Reproducibility: < 3 ppm according to VDI 2053 Measuring principle: infrared principle (NDIR)
Response Time T90: < 60 s Accuracy: standard: ±50 ppm ±2 % of meas. value (at 20°C, 1023 mbar)
opt. /5000: ±50 ppm ±3 % of meas. value (at 20°C, 1023 mbar)
Cross sensitivity: < 2% of 300 ppm CO (acc. to VDI 2053)
Output signal: 4 - 20 mA (3-wire), standard
Linearity error: < 2% of 300 ppm CO (acc. to VDI 2053) 0 - 1 V or 0 - 10 V (3-wire), optional
Offset ad ustment: automatically Output scaling: free scaleable, by entering display range
Output signal: 4 - 20 mA, 2-wire, max. burdon = 500 Ohm Auxiliary energy: 12 ... 30 V DC, max. 600 mA
Power supply: 12 - 28 V DC (at option VO: 16 - 28 V DC) (at option 0-10V: 18 ... 30 V DC, max. 600 mA)
Permissible burdon: RA Ω] = (Uv [V] - 12 V or 16 V) / 0.02 A Perm. burdon (at 4-20mA): RA < 200 Ω
Temperature probe
Working condition: -10 ... +40 °C, 15 ... 95 %RH (non-condensing) Perm. load (at 0-...Volt): RL > 3000 Ω
Option: o te pl approx. 13 mm high, 3½-digit LC-display Display: approx. 10 mm high, 4-digit LC-display
EMC: according to EN 50 081-1, EN 50 082-2 B Working condition: -10 ... +50 °C, 5 ... 95 % r.F., 850 ... 1100 hPa
Electric connection: elbow-type plug acc. to DIN 43650 (IP65), Storage condition: -25 ... +60 °C, 5 ... 95 % r.F., 700 ... 1100 hPa
max. wire cross section: 1.5 mm², Electric connection: elbow-type plug acc. to DIN 43650 (IP65),
wire diameter from 4.5 to 7 mm max. wire cross section: 1.5 mm²,
wire diameter from 4.5 to 7 mm
Housing: ABS, 82 x 80 x 55 mm (without elbow-type plug)
Housing: ABS, 82 x 80 x 55 mm (without elbow-type plug)
Weight: approx. 190 g Weight: approx. 225 g
Features: - min-/max-value memory,
Alarm / Protection
Options / upcharge - optical alarm,

VO: on site display - input of offset and scale for adjusting
Accessories Options / upcharge

GZ-01 test gas cap GT (for controlled flow with test gas) 5000: measuring range: 0 ... 5000 ppm CO2
GZ-02 gas bottle with 12l test gas: 30 ppm CO AV01: output signal 0-1V
GZ-03 gas bottle with 12l test gas: 300 ppm CO AV010: output signal 0-10V
GZ-0 gas valve unit MiniFlo for gas bottles with 12l
GSN 2 plug-in power supply (230VAC => 24VDC/300mA)
Accessories
GSN 2 -750 plug-in power supply (230VAC => 24VDC/750mA)
additional accessories upon re uest
92
air oxygen measuring transducer oxygen measuring transducer
for dissolved oxygen in liquids
Handheld instrument
WK
OXY 3690 MP lo e e o OXY 3610 MP incl. oxygen sensor
oxygen concentration: 0.0 to 100.0 % O2 (gaseous) oxygen concentration: 0.00 to 25.00 mg/l (dissolved)
temperature: -20.0 ... 50.0 °C temperature: 0.0 ... 50.0 °C
Accuracy device (at nominal temperature 25°C): Accuracy device (at nominal temperature 25°C):
oxygen: ±0.1 % ± 1 digit oxygen: ±1.5 % of m.v. ± 0.2 mg/l
temperature: ±0.1 °C ± 1 digit temperature: ±0.1 °C ± 1 digit
Output signal (only 02): 4 - 20 mA (2-wire - standard) Output signal (only 02): 4 - 20 mA (2-wire - standard)
Logger / EASYBus
0 - 10 V (3-wire - option) 0 - 10 V (3-wire - option)
Electric isolation: input electrically isolated Electric isolation: input electrically isolated
Auxiliary energy: 12 ... 30 V DC (at output 4-20 mA) Auxiliary energy: 12 ... 30 V DC (at output 4-20mA)
18 ... 30 V DC (at output 0-10 V - option) 18 ... 30 V DC (at output 0-10V - option)
Perm. impedance (at 4-20mA): RA Ω] = (Uv [V] - 12 V) / 0.02 A Perm. impedance (at 4-20mA): RA Ω] = (Uv [V] - 12 V) / 0.02 A
Permissible load (at 0-10Volt): RL > 3000 Ω Permissible load (at 0-10Volt): RL > 3000 Ω
Working condition: 0 to +50 °C, 0 to +95 %RH (non-condensing) Working condition: 0 to +50 °C, 0 to +95 %RH (non-condensing)
Storage temperature: -20 to +70 °C Storage temperature: -20 to +70 °C
Reverse voltage protection: 50 V permanently Reverse voltage protection: 50 V permanently
Display: approx. 10 mm high, 4-digit LCD-display Display: approx. 10 mm high, 4-digit LCD-display
Housing: ABS (IP65 - with the exception of sensor plug) Housing: ABS (IP65 - with the exception of sensor plug)
Dimensions: 82 x 80 x 55 mm (without elbow-type plug and sensor plug) Dimensions: 82 x 80 x 55 mm (without elbow-type plug and sensor plug)
Electric connection: elbow-type plug acc. to DIN 43650 (IP65), Electric connection: elbow-type plug acc. to DIN 43650 (IP65),
max. wire cross section: 1.5 mm², max. wire cross section: 1.5 mm²,
Transmitter
wire diameter from 4.5 to 7 mm wire diameter from 4.5 to 7 mm
Sensor connection: 5-pin jack connector, screwable Sensor connection: 5-pin jack connector, screwable
Calibration: 1-point calibration in atmospheric air. Calibration: 1-point calibration: simple quick calibration in atmospheric air.
Air pressure compensation: 500...2000 hPa abs., manually input oxygen sensor (GWO3600MU):
Oxygen sensor: Standard Option: ... /S Electrode: active membrane type, with integrated NTC-resistor
Sensor type: GGO 370 / MU GGO 369 S / MU Response time: 95% in 10 sec., depending on temperature
Measuring range: 0.0 to 100.0 % O2 0.0 to 25.0 % O2 Operation life: 3 years or more, depending on maintenance
Response time T90: <10 sec., e en in on te er ture <15 sec., e en in on te er ture Operating pressure: max. 3 bar.
Warranty: 12 months 12 months Flow rate: min. 30 cm/sec.
assuming appropriate usage according to the manual Build in diameter: Ø 12,0 ±0,2 mm suit e for screw connection
Application area: suitable for air and pure suitable for air and high Overall length: approx. 220 mm (with anti-buckling glanding)
Temperature probe
oxygen CO2-concentrations Build in length: approx. 110 mm

Temperature compensation: integrated in oxygen sensor Connection cable: approx. 4 m, with 5-pin plug, screwable
Connection cable: approx. 1.3 m, with 5-pin plug, screwable Warranty: 12 months
Operating pressure: 500 ... 2000 hPa (static). Working temperature: 0 to +40 °C
For air and gas-stream use the o ygen sensor Scope of supply: device incl. electrode, GWOK01 and KOH100
Working condition: -5 to +50 °C, 0 to +95 %RH (non-condensing)
Storage temperature: -15 to +60 °C Options / upcharge
Dimensions of housing: approx. Ø 40 x 103 mm 53 inc nti uc in n in
housing with M16x1-screw thread (sensor can AV010: output signal 0-10V
be connected to line tubes by means of an
included adapter piece) Accessories / spare parts
GWO 3600 MU Spare electrode with 4m cable
Options / upcharge
Alarm / Protection
Upcharge for electrode with 10m cable length

AV010: output signal 0-10V Upcharge for electrode with 30m cable length
S: oxygen sensor GGO 369 S / MU,
GSKA 3600 protection cap for depth measuring
for measurements in gas with high CO2 (further information p.r.t. p. 31)
GOO: oxygen sensor GOO 370 / MU, open sensor type, GAS 3600 working set
(consisting of 3 spare diaphragm heads and 100ml KOH-electrolyte)
suitable for air and gas-stream. (further information p.r.t. p. 31)
KL10: sensor connection cable 10 m GWOK 01 spare diaphragm head per piece
KOH 100 spare electrolyte KOH 100 ml-bottle
Accessories / spare parts
BA 10 Baby Flow apparatus for 12mm electrodes
GOEL 369 S spare sensor element for GGO 369 S / MU Provides sufficient flow for the electrode permanently, therefore the
GOEL 370 spare sensor element for GGO 370 / MU minimum flow is ensured (e.g. for measurings in large depths)
93
pH-measuring transducer Redox-measuring transducer
with on site display and electrically isolation with electrically isolation
Handheld instrument
WK
GPHU 014 MP / BNC without electrode GRMU 2000 MP

without electrode
GPHU 014 MP / Cinch without electr.

Specification
Properties Measuring range: ±2000 mV
or special limited measuring ranges acc. to customer
automatically and manually temperatur compensation specification!
external Pt1000-temperature probe connectable Accuracy: 0.2 % FS (at nominal temperature = 25°C)
sensor input electrically isolated Output signal: 4 - 20 mA (2-wire), standard
2-point calibration 0 - 10 V (3-wire), optional
Electric isolation: input electrically isolated
Specification
Auxiliary energy: 12 ... 30 V DC (for option 0-10V: 18 ... 30 V DC )
Measuring range: 0.00 to 14.00 pH Perm. impedance (at 4-20mA): RA Ω] = (Uv [V] - 12V) / 0.02 A
Logger / EASYBus
Accuracy: 0.02 pH ±1 digit (at nominal temperature = 25°C) Permissible load (at 0-10Volt): RL > 3000 Ω
Output signal: 4 - 20 mA (2-wire), standard
Electrode: redox electrode GE105
0 - 10 V (3-wire), optional
(electrode not included in scope of supply!)
Electric isolation: input electrically isolated
Input resistance: 1012 Ohm
Auxiliary energy: 12 ... 30 V DC (for option 0-10V: 18 ... 30 V DC )
Electrode socket: Cinch-socket (standard)
Perm. impedance (at 4-20mA): RA Ω] = (Uv [V] - 12V) / 0.02 A
BNC-socket with upcharge
Permissible load (at 0-10Volt): RL > 3000 Ω
Option: o te pl approx. 10 mm high, 4-digit LCD-display
Electrode: any standard pH electrode is suitable.
Working temperature: 0 ... +50 °C (electronic)
(ph electrode not included in scope of supply)
Input resistance: 1012 Ohm
Electric connection: elbow-type plug acc. to DIN 43650 (IP65)
Electrode socket: BNC-socket or Cinch-socket
empe t e ompe t o : -30 ... 150°C, Housing: ABS (IP65) with the exception of electrode con-
manually via 3 keys or automatically via external nection sockets. (cpl. IP65 upon request)
Pt1000 sensor. Dimensions: 82 x 80 x 55 mm (H x W x D)
Adjustment: via 3 keys and integrated LCD Mounting: with fixing holes for wall mounting
Transmitter
Temp. sensor socket: 2x banana socket Ø4mm, for Pt1000 probe. (accessible after removal of cover)
Display: approx. 10 mm high, 4-digit LCD-display Mounting distance: 70 x 50 mm (W x H)
Fixing screws: max. schaft-Ø 4 mm
Working temperature: 0 ... +50 °C (electronic)
Electric connection: elbow-type plug acc. to DIN 43650 (IP65) Options / upcharge
Housing: ABS
VO: on site display
IP rating: IP65, with the exception of electrode and temp.
connection sockets. (cpl. IP65 upon request) AV010: output signal 0-10V
Dimensions: 82 x 80 x 55 mm (H x W x D) BNC: electrode socket: BNC
Mounting: with fixing holes for wall mounting MB...: limited measuring range (please state the desired range)
Temperature probe
Fixing screws: max. shaft-Ø Ordering example

Options / upcharge GRMU 2000 MP / BNC, VO:
GRMU2000MP with BNC electrode socket and on site display
AV010: output signal 0-10V
MB...: limited measuring range (please state the desired range) Accessories / spare parts
(i.e.: 2,00 ... 10,00 pH) GE 105 redox electrode with cinch-plug and testing solution
Ordering example PG 13,5 plug on thread adapter for pressureless use,
with external thread PG 13.5 (suitable for any electrode)
GPHU 01 MP / BNC, AV010:
pH-transmitter with BNC electrode socket and 0-10V output signal For additional electrodes and accessories p.r.t. page 37
Accessories / spare parts Dimensioned sketch GPHU / GRMU

Alarm / Protection
water proof Pt1000-temperature probe,

with 2 banana plugs Ø 4mm
for additional t1 -temperature probes p.r.t. page 104, 11 -11
GE 100 standard electrode, cinch-plug
GE 117 pH electrode with integrated Pt1000-sensor
1 x BNC-plug and 1 x banana plug Ø 4mm,
thread PG13,5, pressure resistant up to 6bar
PG 13,5 plug on thread adapter for pressureless use
GAK 1 00 working and calibration set (p.r.t. page 37)
for additional electrodes and accessories p.r.t. page 36-37, 104, 112-113
9
Conductivity measuring transducer
Handheld instrument
WK WK
GLMU 200 MP incl. 2-pol meas.cell GLMU 400 MP incl. -pol meas.cell
Application area Application area
Easy, low-cost conductivity measurement Higher saline concentrations (e.g. brine measuring)
Drink water monitoring Measurements in polluted solutions / waste water
Fish farming / water monitoring Control of neutralization
Fresh and sea water aquaristics Heavily polluted liquids
Logger / EASYBus
compact conductivity measuring cell high-quality conductivity measuring cell, insensitive to dirt
Output signal freely scaleable Output signal freely scaleable
Adjustable cell constant Adjustable cell constant
Selectable temperature compensation mode Selectable temperature compensation mode
On site display for the conductivity or temperature On site display for the conductivity or temperature
Exchangeable unit stickers Exchangeable unit stickers
Specification GLMU 200 MP GLMU 00 MP

Measuring range: ( free selectable by user ) Accuracy: ( at nominal temperature = 25°C )
Conductivity: 0.0 ... 200.0 μS/cm 0.0 ... 200.0 μS/cm Conductivity: ±0.5% of meas. value ±0.3% FS
0 ... 2000 μS/cm 0 ... 2000 μS/cm Temperature meas.: ±0.2°C ±1 digit
0.00 ... 20.00 mS/cm 0.00 ... 20.00 mS/cm Meas. cell connection: 7-pole diode connector
0.0 ... 200.0 mS/cm 0.0 ... 200.0 mS/cm Cell constant: K = 0,30 ... 1,20, freely adjustable
-- 0 ... 500 mS/cm Temperature compensation: ( selectable by user )
Transmitter
specific resistance: 5.0 ... 100.0 kOhm*cm 0.0 ... 200.0 kOhm*cm off: no compensation
0.50 ... 10.00 kOhm*cm 0.00 ... 20.00 kOhm*cm Lin: linear compensation (from 0.3 ... 3.0 %/K)
50 ... 1000 Ohm*cm 1 ... 5000 Ohm*cm nLF: non-linear function of natural water
5.0 ... 100.0 Ohm*cm 1.0 ... 500.0 Ohm*cm according to EN27888 (DIN 38404)
-- 1.00 ... 50.00 Ohm*cm Display: approx. 10 mm high, 4-digit LC-display
TDS: 0.0 ... 200.0 mg/l 0.0 ... 200.0 mg/l Output signal: 4 - 20 mA (2-wire), standard
0 ... 2000 mg/l 0 ... 500.0 mg/l 0 - 1 V or 0 - 10 V (3-wire), with upcharge
-- 0.00 ... 2000.00 mg/l Electric isolation: input electrically isolated
-- 0.0 ... 20.0 g/l
Auxiliary energy: 12 ... 30 V DC (for option 0-10 Volt: 18 ... 30 V DC)
-- 0 ... 200 g/
Reverse voltage protection: 50 V permanent
Salinity: 0.0 ... 70.0 0.0 ... 70.0
Temperature probe
Perm. impedance (at 4-20 mA): RA Ω] = (Uv [V] - 12V) / 0.02 A

Temperature meas.: -5.0 ... +140.0 °C (transducer) -5.0 ... +140.0 °C (transducer)
0.0 ... +80.0 °C (meas. cell) 0.0 ... +80.0 °C (meas. cell) Permissible load (at 0-10 Volt): RL > 3000 Ω
Measuring cell: 2-pole measuring cell 4-pole measuring cell Working temperature: -25 ... +50 °C (transducer)
0 ... +80 °C (standard meas. cell)
Standard meas. cell: conductivity measuring cell with graphite electrodes
and integrated temperature sensor. Storage temperature: -25 ... +70 °C
The cell constant is measured and preset ex works. Electric connection: elbow-type plug acc. to DIN 43650 (IP65)
Measuring cell in breakage-protected plastic pole, Housing: ABS (IP65) with the exception of electrode socket
heat resistant up to 80 °C, Ø12 mm, length of shaft Dimensions: 82 x 80 x 55 mm, without elbow-type plug and socket
120 mm, approx. 1 m connection cable. Warranty: 12 months
For pressureless applications use the slip-on thread Mounting: with fixing holes for wall mounting,
adapter P 1 .5. For pressures up to bar order cell Mounting distance: 148 x 50 mm (W x H)
with fixed PG13.5 thread (optionally).
Option / upcharge Option / upcharge
Alarm / Protection
- LTG W
- AV010: output signal 0-10V
for organic matter (alcohol, petrol, diesel) NE
- AV01: output signal 0-1V
up to max. 1000 μS/cm
- KL ..: longer meas. cell cable (recommended max. 5m) each m
with glass shaft, unplatinized,
1,35 m PUR-cable Accessories / spare parts
LFE 202 spare 2-pol measuring cell (for GLMU 200 MP)
- PG electrode with thread PG13.5 (for use up to 6 bar) LFE 200 spare 4-pol measuring cell (for GLMU 400 MP)
PG 13.5 plug on thread adapter for pressureless use
GKL 100 100 ml control solution, 3 c ursu nt 888
GEH 1 Swivel-arm electrode retainer
95
Air flow measuring transducer Miniature Air Velocity Transmitter
Handheld instrument
W
NE
GSMU 1020 B5
GSMU 1020 C5 GSMU 575
3 measuring ranges integrated in each device The transmitter is for measuring air velocity. The measurement method
selection between 2 different response times is based on the hot-film anemometer principle, for that purpose, a special
high accuracy thin-film sensor element has been developed. An accurate and reliable
almost independent of flow direction determination of the air velocity depends on the correct positioning of the
shock resistant sensor probe in the air stream. Accurate measurements are only possible
Logger / EASYBus
resistant to pollution if the sensor probe is installed where there is no turbulence.
Application Application
air conditioning and ventilation technology heating, ventilating
process and environmental technology air conditioning technology
Measuring principle: no moving parts. Hot-film anemometer principle. supply air control of ovens
Measuring range flow: Working range 0...20m/s
GSMU 1020..: 0...10 m/s, 0...15 m/s and 0...20 m/s
other upon request
Measuring range can be set by means of jumper.
Output signal: 0 - 10 Volt (Iout < 1.0 mA) or Output signal 0...10V (max. 1mA)
4 - 20 mA (Ri < 450 Ohm) Accuracy Velocity at 20°C / 45%RH, 1013hPa, at 1...20m/s
1...20m/s: ±(0,4m/s + 6% of measuring value)
Transmitter
Measuring range can be set by means of jumper.

Measuring accuracy: (at 20 °C, 45 %RH, 1013 hPa) Response time bei 10m/s t90 typ. 4s
GSMU 1020: 0 ... 10 m/s: ± 0,2 m/s ± 3 % of measured value Power supply 19...29V DC
0 ... 15 m/s: ± 0,2 m/s ± 3 % of measured value
0 ... 20 m/s: ± 0,2 m/s ± 4 % of measured value Power consumption max. 70mA bei 20m/s
Response time: T90 (at 10 m/s): typ. 4 s or 0.2 s Temperature range working temperature: -20 60°C
Response time can be set by means of jumper. storage temperature: -30 60°C
Dependency on flow direction: < 3 % of measured value at Δα < 10° Connection 0,5 m cabel, PVC 3x0,25mm , wire end ferrule
Voltage supply: AC / DC ±20%, max. 150 mA
Electromagnetic Compatibility EN61326-1
max. load: 500 Ohm
EN61326-2-3
Connection: screw-type terminals up to 1.5 mm
Temperature probe
Operating temperature: -10 ... +50 °C Housing polycarbonate, Lenght: 120 mm, Ø 12 mm
Storage temperature: -20 ... +60 °C Protection class IP20 (measuring head), IP40 (housing)
Housing: 80 x 80 x 35 mm (H x W x D)
Material: ABS Accessories
Protection rating: IP65 (electronic box) GNG 24/150 power supply: 24 VDC, 150 mA
Sensor tube: length = 200 mm (+18 mm for sensor head), Ø 12 mm
GSMU...B5: sensor tube permanently connected to housing
GSMU...C5: sensor tube connected to housing via cable (approx. 1 m long)
ther tube or cable lengths upon re uest.
EMC: Conforming to acc. to DIN EN 50081-1 and DIN EN 50082-2
Alarm / Protection
Accessories
GNG 24/150 power supply: 24 VDC, 150 mA
GNT 0520 mains transformer: 230V to 24V ,
with mounting clamp and screw-type terminals.
Dimensions approx. 62 x 56 x 32.5 mm
96
Rotational speed sensor Caloric
proximity switch with analog output flow controller
Handheld instrument
EFKM
EFK2
EFKP
EFFI EFK2
EFFU EFKP
EFKM
Properties
The EFFI and EFFU combine a proximity switch with the signal processing Properties
to standard signals in one device.
The flow controllers EFK... monitor liquids and gaseous substances. The
he scaling of the standard signal output can be done at face. instrument combines compact dimensions with a integral probe, a LED
Programming: trend display (for FLOW) with dual-colour status indicator and an output
Logger / EASYBus
- The value for 0 Hz is fixed: 4 mA or 0 V whose switch-point can be adjusted via a potentiometer.
- For programming the upper output limit (20 mA or 10 V) you have to no moving parts in the monitored medium
adjust the max. frequency in the system. By connecting two contacts the mounting largely independent of pipe diameter
device is programmed to this value. low pressure loss
high working pressures (up to 100 bar)
Area of application
Specification
Metalworking industry: cooling liquid and lubricant monitoring
Measuring principle: hall-sensor Steel industry: coolant circuits
Sensing distance: 4 mm Chemical industry: protection against dry running (for pumps), detec-
Measuring range: 1 ... 4095 Hz tion of leaks and fill level monitoring
Output signal: EFFI: 4 - 20 mA (3-wire) Beverage industry: monitoring of cleaning processes
EFFU: 0 - 10 V (3-wire)
Sensors suitable for: Water, oil, aggressive substances
Sampling interval: periods measurement, output update 50 ms
Transmitter
Output accuracy: ±0.25 % of full scale Specification
Auxiliary energy: 10 ... 30 V DC (at EFFU: 15 ... 30 V DC) Measuring principle: calorimetric
Idle current: max. 20 mA (without load) Operating range: 20 ... 50 cm/s (for water)
Electrical connection: 4-pole locking plug M12 x 1 (connection cable see p. 95) Display: EFK2 2-colour LED (red < threshold, green > threshold)
Working temperature: 0 .. 70 °C EFKP, EFKM 9 LEDs (red - threshold, green 1-8 - flow)
Protection class: IP 67 Switch-point adjustment: via potentiometer
Housing materials: nickel plated brass, PA66 Output: EFK2 relay contact (max. 30 V / 2 A) NO (open = no flow)
Dimensions: Ø 10 x 66.5 mm Optional: NPN-transistor output (max. 24 V / 100 mA)
Weight: approx. 25 g PNP-transistor output (max. 24 V / 100 mA)
Output: EFKP, EFKM NPN-transistor output (max. 24 V / 200 mA)
Optional: PNP-transistor output (max. 24 V / 200 mA)
Temperature probe
Auxiliary energy: 24 V DC ±10 %

Power consumption: max. 70 mA
Electrical connection: 4-pole locking plug M12 x 1 (connection cable see left)
M12 - connection cable Working pressure: max. 100 bar
Working temperature: 15 .. 70 °C
Mounting position: arbitrary
Protection class: IP 65 (EFK2), IP 60 (EFKP), IP 67 (EFKM)
Mech. connections: screw-in threat G1/2A
Option: screw-in threat G1/4A
Probe length: approx. 29 mm (incl. threat)
Materials:
Probe: stainless steel 1.4571
Alarm / Protection
Housing: EFK2: stainless steel 1.4305

Screened PUR-connection cable with moulded M12x1-connector EFKP: PA6.6
(and loose ends). Available in straight and angular design. EFKM: brass, nickel plated
Dimensions: EFK2: Ø 35 x 97 mm (W x H x D)
(without 1 -plug) EFKP: 50 x 50 x 95 mm (W x H x D)
Versions
EFKM: Ø 73 x 81 mm (W x H x D)
KM4P-G02: straight connector, 4-pole, 2 m cable
KM4P-G10: straight connector, 4-pole, 10 m cable Options / upcharges
KM4P-W02: 90° connector, 4-pole, 2 m cable G1/ A: device connection G1/4A
KM4P-W10: 90° connector, 4-pole, 10 m cable PNP: output: PNP
KM4P-GL: connector for self-tailoring, 4-pole NPN: output: NPN
97
Flow meter (rotor) Flow switch
Handheld instrument
W
NE
RRI - 010 / ... (DN10, G3/8) FCM - 6 (2,5 l/min)

RRI - 025 / ... (DN25, G1) FCM - 3 (6 l/min)
The flow meter measures the flow rate with an impeller rotating due to the FCM flow switch has been designed to offer a very simple and safety
flow. The flow rate is proportional to the rotational frequency. The rota- control against the missing flow passage. The electrical components are
tional speed is measured by an inductive proximity switch. separated from the mechanical parts and the reed contact is magnetically
actuated. The switch head is fixed to the body by a fast self locking sys-
no magnets, but with inductive sensor tem and can be replaced without removing the flow switch from the pipe.
largely wear-free due to high-quality ceramic axis and bearing No adjustment or setting is required after the switch head replacement.
Logger / EASYBus
output signal NPN (optional PNP)

no inlet and outflow zone needed No setting required
uncomplicated flow measurement Easy and fast replacement of the switch head
intrinsically safe behaviour Low pressure loss
modular design with several connecting systems Horizontal and vertical mounting
connections plug- and pivotable Liquid and gas applications
Area of application
Sensors suitable for: Water, oil (viscosity up to 10 mm /s (10 cSt.))
Body Brass
Transmitter
Measuring principle: rotor (inductive sensor)

Designs: bore measuring range pulse rate*1 Process connection G
RRI-010 / 020: 2 mm (0.1) 0.5 ... 1.5 l/min. ca. 10200 Imp. / l Sensing element (Piston) Polypropylen
RRI-010 / 050: 5 mm (0.2) 2.0 ... 10 l/min. ca. 3345 Imp. / l Accuracy ± 15%
RRI-010 / 070: 7 mm (0.4) 2.0 ... 12 l/min. ca. 1755 Imp. / l
Temperature max. 90 °C
RRI-025 / 080: 8 mm (2) 3 ... 30 l/min. ca. 1216 Imp. / l
Pressure loss 0,5 bar at max. flow rate
RRI-025 / 120: 12 mm (3) 5 ... 60 l/min. ca. 607 Imp. / l
RRI-025 / 160: 16 mm (4) 6 ... 100 l/min. ca. 252 Imp. / l Flow rate max. 25 l/min, for all settings
Accuracy: ±3 % of meas. value (in spec. meas. range) Weight 170 g
Repeatabiliy: ±1 % of full scale
Pressure decrease: max. 0.5 bar (at max. flow) Reed contact N.O. / No flow condition
Contact rating 300 V, 70 VA, 0,5 A
Temperature probe
Working pressure: max. 16 bar

Output signal: NPN (optional: PNP) Wiring Angle plug
Auxiliary energy: 5 ... 30V DC, max. 10mA (closed current, without load) Protection class IP65
Electrical connection: 2 m cable (optional: 4-pole locking plug M12 x 1)
Working temperature: 0 .. 60 °C Mounting Horizontal and Vertical
Protection class: IP 67 Set point l/min Nominal ON OFF
Mech. connection: nominal bore threat FCM - 6 2,5 2,8 1,7
RRI-010..: DN 10 G 3/8, female thread *2 FCM - 3 6 6,3 4,1
RRI-025..: DN 25 G 1, female thread *2
Mounting position: horizontal or ascending direction of flow
Materials:
Housing: uestra (DN25) / PPS (DN10) Dimensions
Connection *2, rotor: PVDF
Alarm / Protection
Bearing: Iglidur X
Axis: ceramics r02-T P
Seal: viton
Dimensions: 84 x 29 x 88 mm (RRI-010...), 110 x 73 x 103 mm (RRI-025...)
1
precise value on type plate, ma . variability within a batch 10
other threat types (male thread, ...) or materials for connectors upon re uest
Options / upcharges
PNP: output signal PNP
M12: Electr. connection = plug M12 x 1
98
Flow meter for a wide range of applications
(Suitable evaluation devices: GIA20EB, GIR230FR, GIA2000, GIR2002)
Handheld instrument
FHK FH-Messing FHK-PVDF
Advantages Advantages Advantages
exact measurings of fluid volumes sturdy metal housing all parts coming into contact with media are plastic
long life high temperature range suitable for chemical and aggressive media
high operating pressure
Application
Application Application Chemical industry: products containing tensides,
alcoholic and non alcoholic drinks, chemicals, Measuring of low-viscous media in beverage and alkaline products, acids.
water, wine etc. chemical industry etc., such as petrol, fuel etc. Industry: Monitoring of cooling media circuit at ma-
chines, dosing and consumption quantity measurements
Meas. range: approx. 0,03 - 0,58 l/min Meas. range: approx. 0,09 - 1,26 l/min Meas. range: approx. 0,25 - 5 l/min
(other ranges upon request) (other ranges upon request) (other ranges upon request)
Logger / EASYBus
No le: D=1 mm. No le: D=1.5 mm. No le: D=3,3 mm.
Pulse rate: approx. 2223 imp./l Pulse rate: approx. 1450 imp./l Pulse rate: approx. 1033 imp./l
Pressure range: max. 20 bar (at 20°C) Pressure range: max. 20 bar (at 20°C)
Pressure range: max. 20 bar (at 20°C)
Viscosity of media: < 50 cSt.
Viscosity of media: < 50 cSt. Viscosity of media: < 50 cSt.
Meas. accuracy: ±2%
Meas. accuracy: ±2% Repetitive accuracy: <0.25% Meas. accuracy: ±2%
Repetitive accuracy: <0.25% Power supply: 5-24 V DC; max. 13 mA Repetitive accuracy: <0.25%
Power supply: 5-24 V DC; max. 13 mA Output signal: open collector, NPN Power supply: 5-24 V DC; max. 13 mA
Output signal: open collector, NPN Flow connections: 2 x G IG parallel Output signal: open collector, NPN
Flow connections: 2 x G IG parallel Operating temperature: -10 to 100° C Flow connections: 2 x G IG parallel
Operating temperature: -10 to 100° C Dimensions: approx. 55 x 40 x 66 mm incl. plug. Operating temperature: -10 to 100° C
Material of housing: brass chemically nickel plated, Dimensions: approx. 54 x 40 x 66 mm incl. plug.
Dimensions: approx. 55 x 40 x 66 mm incl. plug sealings: Viton, nozzle: V2A
Material of housing: ARNITE, turbine: PVDF, Material of housing: PVDF, sealings: Viton,
Scope of supply: cpl. with 2 tube screw-type nozzle: PTFE, axis: PCTFE
sealings: Viton
glandings for internal tube Ø 8mm.
Transmitter
EPI FHKU FHKSC

Temperature probe
Advantages Advantages Advantages

suitable for higher viscous media suitable for large flow compact device
calibratable low pressure drop measuring of very small quantities
NSF accreditation standard thread connection highly suitable for sucking operations
Application Application Application
chemicals, oil, sirup, liquid soap, catchup, may- Water, acetone, alcohol, ammonia, benzene, Beverage industry: wine, spirits, mineral water
onnaise, cleaning agent concentrate, vinegar, dilution bases, wine, whiskey, Dosing, etc.
for standardization use and other and chemically slightly aggressive media
Meas. range: 0,06 - 5,35 l/min (depending on viscosity) Meas. range: approx. 3 - 26,7 l/min Meas. range: approx. 0,08 - 0,57 l/min.
No le: D=7 mm No le: D=10 mm No le: D=1.2 mm
Alarm / Protection
Pulse rate: approx. 462 imp./l Pulse rate: approx. 65 imp./l Pulse rate: approx. 1925 imp./l
Pressure range: max. 10 bar (at 20°C) Pressure range: max. 20 bar (at 20°C) Pressure range: -1...+0,3 bar (at 20°C)
Viscosity of media: approx. 5 - 8000 cSt. Viscosity of media: < 50 cSt. Viscosity of media: < 50 cSt.
Meas. accuracy: ±1% (depending on viscosity) Meas. accuracy: ±2% Meas. accuracy: ±2%
Repetitive accuracy: < 0.25 % Repetitive accuracy: <0.25% Repetitive accuracy: <0.25%
Power supply: 5-24 V DC; max. 13 mA Power supply: 5-24 V DC; max. 13 mA Power supply: 3.8-20 V DC; <8 mA
Output signal: open collector, NPN Output signal: open collector, NPN Output signal: open collector, NPN
Flow connections: 2 x G IG Flow connections: 2 x G1/2 A Flow connections: 2 x 6 mm tube connection
Operating temperature: -10 to 65° C Operating temperature: -10 to 100°C Operating temperature: -10 to 65° C
Dimensions: approx. 88 x 68 x 57 incl. plug. Dimensions: approx. 75 x 43 x 67 incl. plug. Dimensions: approx. 55 x 40 x 55 mm.
Material of housing: PP 30% GF, sealing: viton Material of housing: Ryton, sealing: viton Material of housing: ARNITE, sealing: silicone.
99
Flow measuring transducer Axial turbine flow sensor Level Switch
with Hall-effect sensor
Handheld instrument
Standard Unit
for liquids
for low viscose, non aggressive liquids
W
NE
VISION 2008 VTH 25 MS - 180 GSS-F25

incl. elbow-type plug cpl. with 2 m of cable, ready for plug-in.
Specification General General

minimum size, maximum accuracy The flow sensor VTH25MS-180 is a measuring The level switches offer to the user a simple and
easy installation, transducer used for measuring the volume flow or reliable solution in the liquid level control applica-
for dosing. It is suitable for a wide range of applications. These standard units are available with
installation in any position possible tions due to its compact design, large measuring cable length of 1,5 m or 3,0 m.
optimum-quality due to high-quality materials used range and high measuring accuracy. The working principle is based on the movement
no maintenance of the magnetic float which drives the reed switch
inside the level-stem. The cable and switch are
Area of application Area of application epoxy sealed inside the stem and the sealing
Logger / EASYBus
manufacturing of oil and gas burners, flow cooling water measurements, process is produced by a temperature controlled
heaters or cooling systems tapping installations, dosing units heating system.
for dish washers and washing machines medical technology, plastics industry, A rugged and free of maintenance product.
automotive technology (measuring of petro laboratory
consumption, etc.) solar systems, heating application, Constructions up to 180°C working temperature
laboratories, chemical works, pharmaceutical industry heat quantity measurement on request
agriculture and horticulture backery machines, kitchen machines Protection class IP65
machine tools Constructions ATEX on request

Rotor-position scanning: Hall-Sensor Sensor: Hall-effect-sensor Float PVDF
Measuring range: 1.5 - 25 l/min Measuring range: 4 - 160 l / min, max. 80 l/min Density (S.G.) ≥ 0,65 g/cm3
Resolution: approx. 1000 pulses/l with continuous operation Stem PVDF
(signal emission as of 1 l / min)
Transmitter
Measuring agent: clean liquids, we recom- Pressure max. 6 bar

mend filtering with approx. Resolution: approx. 65 pulses / litre
Temperature max. 130 °C
20 to 40 micron Measuring agent: liquids
Contact SPST (NO)
Viscosity: up to approx. 15 cSt. Max. particle si e: 0.5 mm
Power: 70 VA / 50 W
Accuracy: ±3% ranging from 10 - 100% Measuring accuracy: ±3% of measured value
Voltage: 300 V AC / 300 V DC
Repeatability: < 0.5% Repeatability: ±0.5%
Current: 0,5 A AC / 0,7 A DC
Working temperature: -20 to +100°C Working temperature: Tmax = 85°C
Cable 3,0 m
Operating pressure: 25 bar Max. operating pressure: 10 bar
Connection 1/8
Electric connection: elbow-type plug acc. DIN43650, Auxiliary energy: 10 - 30 V DC
Switching difference: 25 mm
type C industrial Output signal: frequency, open collector NPN
Accuracy Switching point: ±3 mm
Auxiliary energy: 5 - 24 V DC, approx. 8 mA Output current: max. 20 mA
Temperature probe
Working ambient temp.: -30/+55°C / RH 90%

Multiplier (R): 1 - 2.2 kOhm Material:
Output signal: frequency 5 - 416 Hz, Duct: brass
open collector NPN Turbine cage: PPO Noryl GFN 3V 960
Output current: max. 20 mA Rotor: PPO Noryl GFN 2V 73701,
Dimensions: approx. 55 x 17 x 30 mm with solenoids
Material: Bearings: saphire / PA
Housing: Grilamid TR55 (PA12) Shaft: CrNi-steel (1.4436)
Rotor: Grilamid (PA12 Ferrit) Delivery connection: R 1 - outer thread
Bearings: PTFE 15% graphite Nominal width: DN 25
Delivery connection: G 3/8 thread
DN: 8 mm
Alarm / Protection
Knurled union nut

Clamped joint
Sealing
Dimensions in mm
100
Level Switch Float switch
Handheld instrument
W
NE
RWI-016PPK
RW-015HKL
GNS-C1 (with 1 microswitch) RWI-016PPK (polypropylene)
GNS-C2 (with 2 microswitches) RWI-016PVK (PVDF)
RW-015HKL (stainless steel)
Properties
These level switches offer the most reliable solution for liquid level control Properties
were side mounting system is required. The small outlines, the materials Mechanical level controller for liquids. A magnet-equipped float triggers a
and the mounting versatility make this unit one of the level switches more pre-fixed reed switch.
required by the market. The S50 series is also suitable for use with proc-
ess temperature up to 180 °C. wall mounting
Logger / EASYBus
Switch head magnetically actuated reliable
1 or 2 microswitches good repeatabilty
Adjustable stem length stainless steel design for high temperatures
Brass or AISI-316 construction
Area of application
Specification
Sensor suitable for: Water, oil,
Processconnection G1
Float - S50 (S.G.) > 0,7 g/cm3
Pressure max. 25 bar Specification RWI-016PPK RWI-016PVK RW-015HKL
Temperature max. 180°C Measuring principle: reed switch reed switch reed switch
Working ambient temperature -30/+55°C / RH 90% Switch type: n.c. or n.o depending on installation position
Hysteresis max. 20 mm Switching power: 250 V AC, 0.5 A, 250 V AC, 0.5 A, 220 V AC, 0.28 A,
Weight 440 g 50 VA 50 VA 30 VA
Transmitter
Male threads Gas parallel UNI 228/1 Density medium: >0.6 g/cm >0.75 g/cm >0.70 g/cm
Body materials Natural Brass or Stainless steal (AISI-316) Working temperature: max. 90 °C max. 130 °C max. 200 °C
Float material Stainless steal (AISI-3169 Working pressure: PN = 3 bar PN = 6 bar PN = 5 bar
Microswitch 1x or 2x SPDT Mounting position: horizontal horizontal horizontal
Voltage 250 V AC / 48 V DC Protection class: IP 65 IP 65 IP 65
Current 3A AC / 3A DC Electrical connection: 50 cm cable 50 cm cable 60 cm strand
Electr. Connection via screw terminals Materials:
Wiring Independent micro switches separately wired SPDT Body: PP PVDF stainl. steel 1.4571
Protection Class IP65 Housing Float: PP PVDF stainl. steel 1.4571
Seal: viton viton
Order Example Weight: approx. 75 g approx. 75 g approx. 120 g
Temperature probe
GNS-C2-O: Level switch with 1 microswitch, Body material Brass Dimensions: RWI-016...
Body Materials
-O Natural Brass
-S AISI - 316 Assembly internally:
Hole diameter Ø16.5 mm
Assembly externally:
Hole diameter Ø23 mm
Alarm / Protection
Dimensions: RW-015HKL
Stem position 1 Microswitch 2 Microswitch

ON OFF ON OFF
Long -46 mm -63 mm -32 mm -49 mm
Medium -48 mm -61 mm -34 mm -47 mm
Short -50 mm -60 mm -36 mm -46 mm
Switch point tolerance: ±5 mm
101
Level transmitter Single contact level switch
Handheld instrument
W
NE
LC-S45M... (brass) ab
LC-S44M... (brass) ab
LC-K52K... (stainless steel) ab GNS-KIT ...
Final prices depend on type, see price table below (without Rod-tube - state when ordering)
A magnet equipped float activates a reed chain inside a tube which is con- The user can do by himself the level switch in the desired length adding
nected to resistors comparable to a potentiometer. The gapless positioning the rod-tube between the process connection and the float-contact unit. The
of the sensors provides a continuous signal with good resolution (up to 10-20 float-contact unit is under water protected.
mm) and repeatability.
Logger / EASYBus
top assembly Sealed under water protected contact

selectable material combinations
Rod-tube in 500 mm / 1000 mm / 1500 mm available
optional: with user-specific characteristic (for adjustment to tank design)
state when ordering
Area of application IP65 protection class
Sensor suitable for: Water, oil,
aggressive substances (only LC-K52K...)
Tube length: 250 mm, 500 mm, 750 mm, 1000 mm, 1500 mm Float-contact unit: Nickel plated brass
and 2000 mm Density > 0,35 g/cm3
Float travel: ..0250 ..0500 ..0750 ..1000 ..1500 ..2000 Pressure max. 20 bar
LC-S45M... : 190 mm 440 mm 690 mm 940 mm Temperature max 105°C
Transmitter
LC-S44M... : 930 mm 1430 mm 1930 mm Connection 1/8

LC-K52K... : 160 mm 410 mm 660 mm 910 mm 1410 mm 1910 mm Reed-contact SPDT: 230 V, 60 VA, 1,0A
Division (resolution): 10 mm (LC-S45..., LC-K52HK0250) or 20 mm
Process connection Threaded, G1 , Brass
Output signal: 4 - 20 mA (2-wire)
Electrical connecton Plug DIN 43650
Optional: 0 - 10 V (3-wire)
Protection Class IP65
Auxiliary energy 10 ... 30 V DC (at option Flex: 18 ... 30 V DC)
Seal NBR - oil resistant
Electrical connection: angular connector acc. to DIN 43650-A
(at option Flex: 4-pole locked plug M12 x 1) Rod-tube Ø 8 mm, Brass
Working temperature: 0 .. 85 °C
Working pressure: max. 20 bar (LC-S..), max. 40 bar (LC-K..) Rod-tube (state when ordering)
Density medium: >0.34 g/cm (LC-S45..), >0.44 g/cm (LC-S44..), Rod-tube lenght FL = 500 mm
Temperature probe
>0.66 g/cm³ (LC-K52..) FL =1000 mm

Mounting position: vertical, float pointing downwards FL = 1500 mm
Protection class: IP 65 Order example: GNS-Kit S1-1000
Dimensions: LC-S45.. LC-S44.. LC-K52..
Sensor head: 50 x 50 x 78 mm 60 x 58 x 78 mm Ø 69 x 78 mm
Tube length: according to design type
Mounting SW: SW 40 SW 46 SW 46
Screw-in threat: G1 A G1 1/2 A G2 A
Float: Ø 30 x 45 mm Ø 44 x 50 mm Ø 52 x 70 mm
Materials:
Housing: Ms58 Ms58 stainl. steel 1.4571
Tube: Ms58 Ms58 stainl. steel 1.4571
Float: Spansil Spansil stainl. steel 1.4571
Alarm / Protection
Prices of design types

tube lenght: ..0250 ..0500 ..0750 ..1000 ..1500 ..2000
LC-S45M...
LC-S44M...
LC-K52K...
Options / upcharges
AV010: output signal 0-10 V
Flex: Transmitter with Flex-head (M12-connection)
user-specific characteristic possible
102
Temperature probes
Accuracy:
Handheld instrument
Pt100 / Pt1000: sensor accuracy acc. to DIN EN 60751 Thermocouples: sensor accuracy acc. to DIN EN 60584-2
DIN Kl. B: (area of validity: -50 ... +500 °C) ±0,3°C at 0°C DIN Kl. 1 f r Typ K: ±1,5°C at range -40...+375°C
DIN Kl. A: (area of validity: -30 ... +300 °C) ±0,15°C at 0°C DIN Kl. 1 f r Typ N: ±1,5°C at range -40...+375°C
DIN Kl. AA 1/3 DIN Kl. B: (0 ... +150 °C) ±0,1°C at 0°C DIN Kl. 1 f r Typ S: ±1°C at range 0...1100°C
1/10 DIN Kl. B: ±0,03°C at 0°C
Special designs ( pcharges):

basic fee for custom made probe
longer probe tube upcharge per further starting 100 mm
longer cable (silicone) upcharge per further starting meter
other cable material upcharge per meter please refer to cable pricing p. 11
teflon covered probe tube (for probes up to 200 mm)
(for probes used in acids and salt water, upper temperature range 250 °C)
waterproof probe handle (casted, only possible with PVC cable -20 ... +105 °C)
higher sensor accuracy: 1/3 DIN Kl. B for Pt100 and Pt1000, tolerances: 0,1°C at 0°C
higher sensor accuracy: 1/10 DIN Kl. B for Pt100-probes, tolerances: 0,03°C at 0°C
Please note: customi ed probes have to be ordered in riting!

return or e change are not possible!
Pt100 Measuring probe
Logger / EASYBus
Ordering type Application / Dimensions (mm) Response suitable
Price
Range / DIN Class techn. specification time T90 for
GT 401 Immersion probe for li uids / gases approx. GMH2000(SA)

-50 ... +400°C non-corrosive stainless steel tube (V4A), plastic handle, approx. 1 m 10 sec. GMH35xx
4-wire PVC cable, anti-buckling glanding, 4-pin miniature DIN-type plug
DIN cl. B GMH3710
GMH3750
GT 401 1/3 DIN as GTF401 however 1/3 DIN class B (±0,1°C at 0°C)
-50 ... +400°C
GT 401 1/10DIN as GTF401 however 1/10 DIN class B (±0,03°C at 0°C) and
Transmitter
-50 ... +400°C flexible jacket tube, Ø 3mm
GES 401 Insertion probe for soft media approx. GMH2000(SA)
-50 ... +400°C Specification as for GTF401 but with needle type prod 10 sec. GMH35xx
DIN cl. B GMH3710
GMH3750
GES 401 1/3 DIN as GES401 however 1/3 DIN class B (±0,1°C at 0°C)
-50 ... +600°C
GT 01 Immersion probe for li uids / gases 4-wire approx. GMH2000(SA)
handle as per GTF150, approx. 1 m 4-wire PVC cable, 10 sec.
Temperature probe
-200 ... +600°C GMH35xx

4-pin miniature DIN-type plug, flecible jacket tube, 3mm Ø.
DIN cl. B (smaller tube diameter upon request) GMH3710
GMH3750
GT 01 1/3 DIN as GTF601 however 1/3 DIN class B (±0,1°C at 0°C)
-200 ... +600°C
GT 35 Immersion probe for li uids / gases 4-wire approx. GMH35xx

-50 ... +400°C non-corrosive stainless steel tube (V4A), approx. 1 m 4-wire 10 sec. GMH3710
PVC cable, 4-pin miniature DIN-type plug
DIN cl. B GMH3750
GL 401 Mini ast and accurate Measurement of ambient air approx. GMH35xx
Alarm / Protection
-25 ... +70°C Ø 1,6 mm, FL = ca. 15 mm, MDIN 4-pin 15 sec. GMH3710
DIN cl. A GMH3750
GO 401 Mini Surface probe for solid surfaces fast

-50 ... +200°C S2 x 2.3mm ceramic Pt1000 sensor mounted at the tip, V4A tube, approx. GMH35xx
4-wire PVC cable with 4-pin miniature DIN-type plug 15 sec.
DIN cl. B GMH3710
GMH3750
Please note the area of validity for the class of accuracy given above.
103
Pt1000 - Measuring probes 2-wire
Handheld instrument
All types of probes also available for Pt100 2- / 3- or 4-wire connection

Ordering type Application / Dimensions (mm) Response suitable
time Price
Range techn. specification T90
for
GT 1 5 Immersion probe for li uids / gases fluid GMH175

-70 ... +200°C non-corrosive stainless steel tube (V4A), plastic handle, approx. GFTH200
Pt1000 class B anti-buckling glanding, 1m highly flexible silicone cable, 3.5 mm 10 sec. ST60, ST80
gold plated jack connector
air
approx.
40 sec.
GT 1 5 LE like before but with loose cable ends GIA20EB

GT 1 5 / 1. Immersion probe for li uids / gases fluid GMH175

-70 ... +200°C probe tube: jacket element Ø1.6mm, flexible, other data p.r.t. GTF175 approx. 4 sec. GFTH200
Pt1000 class B ST60, ST80
air
approx. 25 sec.
GT 1 5 / 1. - LE like before but with loose cable ends GIA20EB
GES 1 5 Insertion probe for soft media approx. GMH175

-70 ... +200°C stainless steel tube (V4A) with slim insertion tip, other data p.r.t. GTF175 10 sec. GFTH200
Pt1000 class B ST60, ST80
GES 1 5 LE like before but with loose cable ends GIA20EB

Logger / EASYBus
GO 1 5 Surface probe for solid surfaces approx. GMH175

-70 ... +200°C S2 x 2.3mm ceramic Pt1000 sensor mounted at the tip. 60 sec. ST60, ST80
Pt1000 class B V4A tube, quadratic 3 x 3 mm at the tip, other data p.r.t. GTF175
GO 1 5 LE like before but with loose cable ends GIA20EB
GO 1 5 Mini Surface probe for solid surfaces fast approx. GMH175

-70 ... +200°C S2 x 2.3mm ceramic Pt1000 sensor mounted at the tip, V4A tube, 15 sec. GFTH200
Pt1000 class B 1m silicone cable, 3.5 mm gold plated jack connector ST60, ST80
Transmitter
GL 1 5 Air/gas probe for clean media approx. GMH175

-70 ... +200°C (for dirty measurands use GTF175), punched V4A protection 15 sec. GFTH200
Pt1000 class B tube, fast miniaturized Pt1000 mounted freely in tube, resulting ST60, ST80
in fast response, other data p.r.t. GTF175
GL 1 5 LE like before but with loose cable ends GIA20EB
GG 1 5 Probe for deep-fro en products approx. GMH175

Temperature probe
-70 ... +200°C to screw into deep-frozen products, etc. no predrilling required. 15 sec. GFTH200
Pt1000 class B Stainless steel (V4A) tube, 6 mm Ø with screw prod, flexible silicone ST60, ST80
cable, 3.5mm phono plug, gold plated
GT 2000 Air- / tube mounting probe GMH175

-50 ... +200°C Probe for diving tube. Tube of stainless steel, highly flexible silicone GFTH200
Pt1000 class B cable 2 x 0.25 , 3.5mm gold plated phono plug ST60, ST80
Alarm / Protection
Customized cable lengths (1m standard), each beginning meter

GT 2000 LE like before but with loose cable ends GIA20EB
GT 2000 WD Air- / tube mounting probe - water proof type GMH175

-20 ... +105°C Construction like described before, but cable of PVC and tube GFTH200
Pt1000 class B enclosed water proof, max. 105°C! ST60, ST80
GT 2000 WD - LE like before but with loose cable ends GIA20EB
e manufacture all types of probes according to our special desires - lo priced and fast. lease contact us.
104
NiCr-Ni (Type K) - Measuring Probe
Handheld instrument
class 1 highest precision-class according to DIN
Response
Ordering Range Application / Dimensions (mm) further
time
type °C T90 technical details
GOF -65 ... +500°C Surface probe approx. Spring-loaded copper plate,
for straight and solid metal surfaces 3 sec. plastic handle, silicone ca-
130CU ble, DIN-type flat-pin plug
3
30 35 000
GOF -65 ... +500°C Surface, immersion, air, gas probe approx. Solid copper plate,
for any solid surface 5 sec. plastic handle, silicone ca-
500 ble, DIN-type flat-pin plug
GOF -65 ... +900°C Surface probe approx. 2 laser welded NiCr-Ni re-
for any solid surface 2 sec. silient springs, V4A-tube,
130 plastic handle, silicone
Logger / EASYBus
cable, DIN-type flat-pin
8
plug
30 35 0 00
GOF -65 ... +400°C Surface probe approx. Small elbow-type,

for fastest measurements in small gaps 2 sec. flexible thermocouple
200HO tapes, plastic handle,
silicone cable, DIN-type
plug
GOF -65 ... +400°C Surface probe approx. Flexible thermocouple

for fastest measurements 2 sec. tapes, plastic handle,
00HO
Transmitter
plug
GOF -65 ... +400°C Surface probe approx. Flexible thermocouple

for fastest measurements 2 sec. tapes, plastic handle,
00VE silicone cable, DIN-type
plug
Accessories:
Temperature probe
MH 400VE: magnet holder
GOF -200 ... +500°C Surface probe approx. Solid copper plate,
for fastest measurements 5 sec. plastic handle, silicone ca-
500 HO ble, DIN-type flat-pin plug
Ø 1,5 MTE (K) Inconel 600
GOF -65 ... +900°C Surface probe approx. 2 laser welded NiCr-Ni re-
for any solid surface 2 sec. silient springs, V4A-tube,
900 HO
plastic handle, silicone
cable, DIN-type flat-pin
Alarm / Protection
plug
GTZ -65 ... +150°C Clip-on probe approx. for tubes up to approx.
for temperature measurements at tube surfaces 3 sec. 1 Ø, silicone cable,
300 DIN-type flat-pin plug
105
NiCr-Ni Standard Measuring Probe Type K (ctd.)
Probes as Pt100 or Pt1000 upon request
Handheld instrument
Response
time
GTF -65 ... +550°C Immersion probe approx. Stainless steel tube, 1.5Ø,
inexpensive, fast, elastic (rigid) 3 sec. L=130mm, silicone cable
00
GTF -65 ... +1000°C Immersion probe approx. Stainless steel tube, 3Ø,
inexpensive, elastic (rigid) 5 sec. L=130mm, silicone cable
900
,5
3
n en th inst u ch r e
each additional 100mm
35 000
GTF -200 ... +1150°C Immersion probe for High-temperature approx. Inconel 1.5Ø, L=150mm,
flexible thermowell 3 sec. silicone cable,
1200 DIN-type flat-pin plug,
,5
electrically insulated
3
35 000
GTF -200 ... +1150°C Immersion probe approx. Inconel 3Ø, L=300mm,
flexible thermowell 5 sec. electrically insulated
-200 ... +1000°C

GTF Immersion probe approx. V4A tube Ø6x1,4 mm,
Logger / EASYBus
for aluminium melt, non-ferrous metal, etc. 30 sec. L=1000mm rigid, plastic handle,
1000 AL 1m silicone cable, DIN-type
flat-pin plug, add. internal
jacket TC, high lifetime
GES -50 ... +250°C Core temperature- / food probe 1 m teflon calbe,
21K big white teflon handle water- and steam-tight, stainless steal loose ends, teflon handle
anti-buckling
Ø 3,0
Use for canteen kitchen,

backeries, butcher´s
100 70 1000 shops, etc.
-65 ... +550°C
GES Insertion probe approx. Flexible stainless steel
for soft media 3 sec. (V4A) needle, 1.5 mm Ø,
130 plastic handle, silicone ca-
Transmitter
Ø 1.5
3
ble, DIN-type flat-pin plug

30 35 000
GES -65 ... +550°C Insertion probe approx. Flexible stainless steel
for soft media 5 sec. (V4A) needle, 3 mm Ø, ...
500
GES -65 ... +1000°C Insertion probe approx. Stainless steel (V4A) tube,
inexpensive, elastic (rigid) 5 sec. 3Ø, L=130mm, plastic
900 handle, silicone cable,
3
DIN-type flat-pin plug

Temperature probe
30 35 000
GKF -65 ... +200°C Probe for compost, grain etc, approx. V4A tube 8mm dia.
quick response within seconds but also rigid design 6 sec. reduced to 3 mm, plastic
125 handle, silicone cable,
GAF -65 ... +550°C Injection or aspalt probe approx. V4A tube 8mm dia. reduced
for liquid or soft media etc. 6 sec. to 3 mm, plastic handle,
200 spiral cable stretchable to
Alarm / Protection
1.2m, DIN-type flat-pin plug

ch r e for other ro e en th
GTL -65 ... +600°C Air/gas probe approx. Stainless steel (V4A) tube,
(room temperature, smoke gases etc.) 1,5 sec. plastic handle, silicone ca-
130 ble, DIN-type flat-pin plug
30 35 000
106
NiCr-Ni Standard Measuring Probe Type K (ctd.)
Handheld instrument
Response
time
Twisted pair of teflon in-

GTF -65 ... +300°C uick-response measurements in air, liquids, approx.
sulated thermowell wires,
for very small surfaces 0,3 sec.
300 0,2 mm Ø each, welded
measuring prod, very flex-
,0
ible, DIN-type flat-pin plug.
c
Any length (up to 50m)
000
against upcharge.
GTF -65 ... +400°C For high temperatures in gases, air and for approx. Pair of glass fibre insulated
solid surfaces (not suitable for liquids) 0,3 sec. thermowell wires, 0,2 mm Ø
300 GS each, DIN-type flat-pin plug.
,0
c
Upcharge for special
length of probe
000
GMF -65 ... +250°C Magnetic surface probe approx. approx. 1m of twisted
sticks at magnetic materials, resilient measuring 5 sec. teflon insulated wire,
250 probe with small metal plate, approx 5mm dia. DIN-type flat-pin plug
Logger / EASYBus
GMF -65 ... +200°C Magnetic surface probe approx. extended type
sticks at magnetic materials, resilient measuring 5 sec. (higher magnetic force),
200 probe with small metal plate, approx 5mm dia. rigid 2m silicone cable,
GGF -65 ... +200°C Probe for deep-fro en products approx. Stainless steel (V4A) tube,
to screw into deep-frozen products, etc. 10 sec. 6 mm Ø with screw prod,
200 spiral cable (approx. 1.2
no predrilling required
m drawn out),
Transmitter
GRF -50 ... +200°C Tire probe approx. plastic handle,
fast response insertion probe with stop screw (needle 5 sec. spiral cable (approx. 1.2m
200 adjustable 0 to 14 mm). Suitable for measuring tem- drawn out),
perature of tires and other soft media. DIN-type flat-pin plug
GKF -50 ... +250°C Cable lug probe 1 m teflon cable,

Ø 4,3
Ø3
loose ends
250
Temperature probe
45 1000
GLS -50 ... +500°C Soldering tip probe approx. thermo couple springs
for direct connection to instrument 2 sec. ( 5mm) with laser welded
500 meas. point (wires 0.3 Ø),
ceramic tube approx. 6 Ø,
GTO -65 ... +400°C Air-/Gas probe (changeable probe without cable) NiCr-Ni-wire 0,5 Ø,
limited suitable also for surfaces welded and grinded flat,
130 OK
3
V4A-tube, DIN-type flat-

pin plug, rigid connection
100
Alarm / Protection
GTE -65 ... +400°C Insertion probe (plug-in type without cable) approx. Flexible stainless steel
for soft media 3 sec. (V4A) needle, 1.5 mm Ø,
,5
130 OK DIN-type flat-pin plug,

rigid connection
00
GTT -200 ... +1150°C Immersion probe (also suitable for gases/air - approx. Thermowell, Inconel 1.5 mm
use as surface probe limited) 3 sec. Ø, electrically insulated,
K
,5
flexible, DIN-type flat-pin

plug, rigid connection
30 (other length or Ø p.r.t. p. 108)
107
Customi ed jacket thermo elements NiCr-Ni,
Handheld instrument
low price standard lengths available from stock

(Delivery on short notice from stock or within 1 or 2 working days) - please do not hesitate to contact us !)
1. acket thermo elements NiCr-Ni (type K) complete with miniature

flat-pin plug NST1200 (free from thermal e.m.f.)
Specification:
acket material: Inconel 600, flexible - other materials upon request
Insulation: highly compressed pure MgO

Thermo wires: NiCr-Ni, DIN IEC 584, welding insulated (volt-free)
Accuracy: optimum accuracy (Cl. 1) = ±1.5°C or ±0,4% of measuring value
(Almost double accuracy as compared to class 2. As a comparison with class 2: ±2,5°C or ±0.75% of meas. value)
Temperature application range: -220 ... +1150°C (Probe tip and front part; wire outlet: max. 200°C)
(Accuracy class 1 applicable from -40 ... +1000°C)
Upon request:
Miniature flat-pin coupling free from
thermal voltage. (Please order separately)
Logger / EASYBus
Type NKU 1200

Integral U-coupling (for installation in
front panels)
Type NKU 1200 O
Advantages of the flat-pin plug free from thermal e.m.f.:
Same material for contacts and thermo elements
No incorrect temperature values due to different materials
Polarity cannot be mixed up
One plug size for Ø from 0,5 to 6,0 mm
Transmitter
Any extension possible (extension cable VKA-1m

or length per customers' requests)
Sensor elements can be exchanged easily
Ø FL Ø FL
Type Price Type Price
mm mm ±10mm mm mm ±10mm
GTT05150 160 GTT30150 145
Temperature probe
GTT05250 260 GTT30250 245

GTT05500 0,5 510 GTT30500 3,0 495
GTT051000 1010 GTT301000 995
GTT051500 1510 GTT301500 1495
GTT10150 145 GTT60150 145
GTT10250 245 GTT60250 245
GTT10500 1,0 495 GTT60500 6,0 495
GTT101000 995 GTT601000 995
Alarm / Protection
GTT101500 1495 GTT601500 1495

GTT15150 145 Accessories:
NKU1200 (coupling free from thermal e.m.f.)
GTT15250 245
NKU1200O (U-coupling free from thermal e.m.f.)
GTT15500 1,5 495 NST1200 (plug free from thermal e.m.f.)
AGL1 (silicone compensation line)
GTT151000 995
VKA-1m plug-in extension cable
GTT151500 1495 (each additional meter)
All thermo elements accuracy class 1 (Almost double accuracy than class 2!)
108
2. Jacket thermo elements NiCr-Ni (type K) complete with cable sleeve and
Handheld instrument
1m silicone cable (compensation line), loose wire ends
Specification:
acket material: Inconel 600, flexible - other materials upon request and against upcharge
Insulation: highly compressed pure MgO
Thermo wires: NiCr-Ni, DIN IEC 584, welding insulated (volt-free)
Accuracy: optimum accuracy (Cl. 1) = ±1.5°C or ±0,4% of measuring value
(Almost double accuracy as compared to class 2. As a comparison with class 2: ±2,5°C or ±0.75% of meas. value)
Connecting cable: silicone compensation line, 1m long (max. 200°C), loose ends. (Longer line or other material against upcharge)
Temperature application range: -220 ... +1150°C (Probe tip and front part; wire outlet: max. 200°C, for cable p.r.t. accessories)
(Accuracy class 1 applicable from -40 ... +1000°C)
L = 1m, for other cable length or other acces-

sories p.r.t. accessories
Advantages:
Mechanically sound
Logger / EASYBus
Can be subjected to high temperatures and pressures
Resistant to aggressive atmospheres
Minimum dimensions, therefore short response times
Flexible (the smaller the diameter the smaller the bending radii))
Optimum accuracy acc. to DIN IEC584 class 1
Potential-free (thermo element wires have no connection to the outer jacket)
Accessories: (against upcharge)

Additional clamping screw-type connection for Ø 1.5, 3.0 and 6.0 (stainless steel). Design with
Transmitter
st. steel clamping piece (for high temperatures) or with teflon clamping piece (up to +250°C - can be removed).
Various thread diameters available (p.r.t. page 116-117)
Extended or other cable (please specify upon order): silicone cable (up to 200°C) or glass silk cable (up to 400°C).
Internal flat-pin plug (NST1200)
Ø FL Ø FL
Type Price Type Price
mm mm -20mm mm mm -20mm
GTF101-5/05150 150 GTF101-5/30150 130
Temperature probe
GTF101-5/05250 250 GTF101-5/30250 230

GTF101-5/05500 0,5 500 GTF101-5/30500 3,0 480
GTF101-5/051000 1000 GTF101-5/301000 980
GTF101-5/051500 1500 GTF101-5/301500 1480
GTF101-5/10150 130 GTF101-5/60150 130
GTF101-5/10250 230 GTF101-5/60250 230
GTF101-5/10500 1,0 480 GTF101-5/60500 6,0 480
GTF101-5/101000 980 GTF101-5/601000 980
Alarm / Protection
GTF101-5/101500 1480 GTF101-5/601500 1480

GTF101-5/15150 130 Accessories:
GTF101-5/15250 230 Clamping screw conn. Ø1.5, 3.0 or 6.0
Silicone cable (up to 200°C)
GTF101-5/15500 1,5 480
Glass silk cable (up to 400°C)
GTF101-5/151000 980 Internal flat-pin plug (NST1200)
GTF101-5/151500 1480 Other accessories see pages 108, 116 and 117.
Accuracy class 1 for all thermo elements (almost double accuracy than class 2!)
109
Pt10Rh-Pt (Typ S) - measuring probes (class 1) for highest temperatures
Ordering type Application / Dimensions (mm) Response further
Measuring range time T90 technical details
Handmessger te
GT 1500/300 Probe for burning kilns or similar applications ceramic tube (type 610)
+50 ... +1500°C Avoid fast temperature changes. Heat up and cool down the probe (FL=300mm) , stainless steel
slowly with kiln. handle, silicone cable, DIN-
ceramic stainless steel type flat-pin plug type "S"
GT 1500/500
+50 ... +1500°C s o e, howe er 500
GB 1550 Bunsen burner probe approx. stainless steel tube Ø8mm,

+50 ... +1550°C Probe tip can be directly exposed to the flame. 2 sec. with reduced ceramic tube
type S - wire Ø5.5mm, plastic handle,
0.5 Ø
flat-pin plug type "S"
An eigen / Regler
GT 103 HT-S Probe for fixed installation in burning kilns and similar appl. sensor tube made of high-
+50 ... +1600°C Heat up and cool down the probe slowly with kiln. grade ceramic KER710,
ceramic stainless steel ALU-B sensor head
other length upon request
NiCrSi-NiSi (Typ N) - meas. probes (class 1) low cost measuring of high temperatures (permanent up to 1300°C)
GT 101-N03250 Probe for permanent high temperatures approx. stainless steel tube
-50 ... +1300°C antle material special steel with e traordinary 5 sec. (FL=250mm), 1m silicone
resistivity against o idation at high temperatures and cable, loose cable ends
short ter e s u to 330
e cellent corrosion resistance in chlorine and am-
Logger / EASYBus
upcharge for any cable

moniacial environments (Protective layer emerges at
length
temperatures above 9 0 )
GT 101-N03500 s o e, howe er 500
GT 101-N031000 s o e, howe er 000
Silicium - meas. probes (sensor: KTY ...)

GTF 1 00 B Temperature probe for GPRT1 00AN Sensor tube: made of V4A,
Sensor: KTY 81-210 with shrinkable sleeve at cable
-20 ... +110°C outlet
Cable: approx. 1 m of highly
flexible silicone cable with
Ø 3.5 mm plug
OPTION: teflon covered probe tube
Messumformer
Replacement for KTY 11-6

(for use in salt water)
GMF 11/180 Sensor tube: V4A
Sensor: KTY 83-110 Handle: polyamide
-50 ... +175°C Cable: approx. 1m of
highly flexible
cable (2 x 0.25 )
GMF 15/81 Screw-type sensor M10 Sensor tube: V4A

Sensor: KTY 81-121 Cable: flexible silicone
-50 ... +60°C cable (2 x 0.25 ),
approx. 1m long
Temperaturf hler
GMF 15/180
Sensor: KTY 83-110
-50 ... +60°C
GMF 30/81 Immersion/touching/air sensor Sensor tube: aluminium head,

Sensor: KTY 81-121 Ø 8.4 mm
-50 ... +60°C Cable: flexible silicone
cable (2 x 0.25 ),
GMF 30/180 approx. 30 cm
Sensor: KTY 83-110 long
-50 ... +60°C
GMF 30/210
Sensor: KTY 81-210
-50 ... +60°C
Alarm / Schut
(Replacement for KTY 11-6) upcharge per m of silicone cable
GMF 30/180 V4A Sensor tube: V4A-head, Ø5 mm

Sensor: KTY 83-110 Cable: approx. 1 m of
-50 ... +175°C highly flexible
silicone cable.
GMF 30/81 V4A Sensor tube: V4A-head,
Ø 6 x 46 mm
Sensor: KTY 81-121
Cable: approx. 1 m of
-50 ... +150°C silicone cable.
Probs with Pt100, Pt1000 or KTY 84 upon request. Accessories p.r.t. page 116-117
110
custom-designed temperature probes (ATE 100)
Handheld instrument
or all potentially explosive atmospheres of the e uipment-groub II with the protection (i) or (e)
GT 101-Ex
-200°C ... +100°C (without neck tube) basic price
without neck tube for temperatures 100°C
-200°C ... +900°C (with neck tube)
Readily assembled voltage free temperature probe

of stainless steel with connection cable. The sen-
with neck tube for temperatures 100°C
sor inset is not exchangeable. Mounting is done via
separate clamping ring fittings GKV. upcharges
Sensors: Pt100, Pt1000, mineral insulated element, 4-wire: meas. range: -200°C ... +100°C (600°C - with neck tube), DIN cl. B
type K or N, mineral insulated thermocouple: meas. range: -200°C ... +100°C (900°C - with neck tube), class 1
Probe lenght: up to 100mm (without upcharge) upcharge per further starting 100mm
Neck tube length: without (without upcharge) upcharge per starting 100mm
Probe diameter: 3mm, 4mm, 5mm, 6mm or 8mm
Cable: silicone cable, standard lenght 1m upcharge per further starting m cable
Ambient temperature: -20...+60°C (protection type e ) resp. -20...+80°C (protection type i )
Type of protection: i : intrinsic safety (without upcharge) e : increased safety
Potentially explosive atmospheres: suitable for zone 1, zone 2, zone 21, zone 22
Clamping ring screw connection: available at M8x1, M10x1, G1/4" and G1/2" for diameter 3mm, 6mm or 8mm. Please refer to page 116
o determine e act order name as for our type list. Download via homepage possible (Products -- -Protection-- emperature probes)
GT 102-Ex
Logger / EASYBus
-200°C ... +100°C (without neck tube) basic price
-200°C ... +900°C (with neck tube) without neck tube for temp. 100°C
Readily assembled voltage free temperature probe

of stainless steel with connection cable. The sen-
sor inset is not exchangeable. Thread is welded or
brazed to the probe. with neck tube for temperatures 100°C
upcharges
Probe length: up to 100mm (without upcharge) upcharge per further starting 100mm
Probe diameter: 3mm, 4mm, 5mm, 6mm or 8mm
Thread: G1/2" (standard)
Transmitter
G1/8", G1/4", G3/8", G3/4", M8x1, M10x1
Cable: silicone cable, standard lenght 1m upcharge per further starting m cable
Potentially explosive atmospheres: suitable for zone 0/1, zone 1, zone 2, zone 20/21, 21, zone 22
o determine e act order name as for our type list. Download via homepage possible (Products -- -Protection-- emperature probes).
GT 103-Ex
-200°C ... +100°C (without neck tube) without neck tube for temp. 100°C basic price
-200°C ... +900°C (with neck tube)
Temperature probe
Readily assembled voltage free temperature probe of stain-

less steel connection head and clamping block. The sensor in-
set is exchangeable. Thread is welded or brazed to the probe.
with neck tube for temperatures 100°C
Mounting is done via clamping ring fitting or thread welded /
brazed to the probe tube. The connection head is also suitable
to carry a head transmitter. upcharges
Probe length: up to 100mm (without upcharge) upcharge per further starting 100mm
Probe diameter: 3mm (the sensor inset is not exchangeable)
Alarm / Protection
4mm, 5mm, 6mm or 8mm (the sensor inset exchangeable)

Thread: G1/2" (standard)
G1/8", G1/4", G3/8", G3/4", M8x1, M10x1 or without thread
Potentially explosive atmospheres: suitable for zone 0, zone 1, zone 2, zone 20, zone 21, zone 22
Transmitter: GITT 01-Ex (please refer to page 85), output signal 4-20mA, measuring range on customers demands
protection type "i" intrinsic safety. For suitable active Ex-barrier please refer to page 86
Clamping ring screw connection: available at M8x1, M10x1, G1/4" and G1/2" for diameter 3mm, 6mm or 8mm. Please refer to page 116
o determine e act order name as for our type list. Download via homepage possible (Products -- -Protection-- emperature probes).
111
Standard probes and custom-designed temperature probes
customi ed products can only be ordered ritten and can generally not be e changed!
Handmessger te
GTF 101 basic price

-200 ... +1150°C (depending on sensor) for Ø3mm, FL=100, L=1m of silicone cable
pre-assembled according to Final price can only be determined

after receipt of customer specification!
customer specification
Please contact us to find out which dias
are available for our various sensors.
Available sensors: Pt100 (2-/ 3- or 4-wire), NiCr-Ni, Pt1000 and others - please contact us!
Measuring range: Pt100/Pt1000: -50 ... +400°C (others upon upcharge), NiCr-Ni: -200 ... +1150°C
Tube material: V4A
FL= please specify probe length upon order (in mm)
An eigen / Regler
asic price valid up to 100mm, upcharge each started additional 100mm

D = Ø 0.5 mm to Ø 8.0 mm. - please specify Ø upon order (available Ø: 0.5, 1.0, 1.5, 2.0, 2.2, 3.0, 4.0, 5.0, 6.0, 6.7, 8.0)
At probe diameters below 4 mm an additional sleeve of Ø 5 mm and 50 mm length is mounted.
asic price valid for D mm. Dias mm upon re uest
L = desired cable length, cable screening (e.g. PVC, silicon, teflon, glass silk etc.) and wire quantity (e.g. 2-, 3- or 4-wire)
to be specified on order. asic price valid for silicone cable, 1m. for upcharge p.r.t. page 11
Additional specification: a) temperature range Please note: depending on tube diameter the sensor
b) ambient temperature design may deviate from figure.
c) plug or other cable connection
Logger / EASYBus
GTF 102 basic price

-200 ... +1150°C (depending on sensor) Final price can only be determined
pre-assembled according to after receipt of customer specification!
customer specification Please contact us to find out which dias
are available for our various sensors.
Available sensors: Pt100 (2-/ 3- or 4-wire), NiCr-Ni, Pt1000 and others - please contact us!
Measuring range: Pt100/Pt1000: -50 ... +400°C (others upon upcharge), NiCr-Ni: -200 ... +1150°C
Tube material: V4A
FL= please specify probe length upon order (in mm)
asic price valid up to 100mm, upcharge each started additional 100mm
D = Ø 0.5 mm to Ø 8.0 mm. - please specify Ø upon order (available Ø: 0.5, 1.0, 1.5, 2.0, 2.2, 3.0, 4.0, 5.0, 6.0, 6.7, 8.0)
asic price valid for D mm. Dias mm upon re uest
Messumformer
L = desired cable length, cable screening (e.g. PVC, silicon, teflon, glass silk etc.) and wire quantity (e.g. 2-, 3- or 4-wire)
to be specified on order. asic price valid for silicone cable, 1m. for upcharge p.r.t. page 11
G = please specify thread desired: e.g. M5 or G etc. Material: stainless steel
(Available threads: M5, M6, M8, M10, M12, G1/4 , G3/8 , G1/2 , G3/4 , M10x1, M12x1.5, M14x1.5). asic price vaild for all threads
GL = specification only required if max. lengths must not be exceeded; unless this is the case glandings acc. to DIN910 are used;
for smaller threads certain standard lengths are used. asic price valid for all threads certain
Additional specification: temperature range, ambient temperature, plug or other cable connection
Ordering example:
GTF101, Pt100, -50...400°C, FL=100mm, D=3mm, KL=1m, teflon cable, 4-wire
GTF101, NiCr-Ni (type K), -50...1150°C, FL=300mm, D=3mm, KL=2m, silicone cable
Temperaturf hler
GTF 200 Pt100 Sensor sleeve made of st. steel

-50 ... +200°C, Pt100, 4-wire Cable: silicone (4 x 0.14 ), approx. 1m
Sensor: Pt100, DIN cl.B (±0,3°C at 0°C) suitable for 2-/ 3- or 4-wire probe
GTF 200 Pt100 WD Sensor sleeve made of st. steel

-20 ... +105°C, Pt100, 4-wire Cable: PVC (4 x 0.14 ), approx. 1m
tube enclosed water proof suitable for 2-/ 3- or 4-wire probe
Sensor: Pt100, DIN cl.B (±0,3°C at 0°C)
Alarm / Schut
GRO 200 Pt100 Sensor body made of aluminium

Cable: silicone, approx. 2m
GRO 200 Pt1000 Probe can be mounted with cable clamp or similar
-50 ... +200°C, DIN cl.B, 4-wire constructions to pipes
For faster heat exchange we suggest our
GRO 200 K heat-conductive paste GWL10G
-50 ... +200°C, NiCr-Ni (type K)
112
Standard probes and custom-designed temperature probes
customi ed products can only be ordered ritten and can generally not be e changed!
Handmessger te
(Del. time from stock or 1 to 2 working days)
GTF 103 (basic design)

GTF 103 OS (without sensor and terminal)
aluminium head type B

G1/2 A V4A
An eigen / Regler
Logger / EASYBus
Material sensor tube:
for Pt100/1000 = material V4A
for NiCr-Ni = Inconel 600
Sensor: Tube length: (Pt100/1000 and NiCr-Ni)

Pt100 / Pt1000 (2-, 3- or -wire) Probe length FL up to 100mm
• -50 ... + 400°C, DIN class B Probe length per each started additional 100 mm
• ±200°C, DIN class B • Neck tube length "HL" each started 100 mm
recommended for higher temperatures, because sensor head (without
• -50 ... + 600°C, DIN cl. B, Jacket-Pt100 p.r.t. Probe Diameter
transmitter) is suitable just up to 200°C or for bridging insulations.
Double - Pt100 (2 x 2-wire) - others on re uest • Insertion spike
Messumformer
• -50 ... + 400°C, DIN class B • Teflon coat (100 mm, Ø 1,5 / 3 / 4 / 5 / 6)
• ±200°C, DIN class B
• Double jacket Pt100 upon request Probe diameter:
NiCr-Ni (type K) note other diameters than stated below are not available!
-200 ... + 1150°C, class 1 Pt100 / Pt1000
Double - NiCr-Ni (type K) • Ø 6 mm, not flexible
-200 ... + 1150°C, class 1 • Ø 3, 4, 5 or 8 mm, not flexible
Ø reduced at the end (e.g. 8 to 3 mmm)
Sensor Head: acket-Pt100
• DIN B head (Alu lacquered), max. 200°C • Ø 6 mm, approx. 40 mm stiff, then flexible
Temperaturf hler
note for higher temperatures order with nec tube • Ø 3 mm, approx. 30 mm stiff, then flexible
plastic sensor head NiCr-Ni (type K), not potential-free
stainless steel sensor head • Ø 6 mm, not flexible
small sensor head (design type DE) • Ø 3 mm, not flexible
with PG9-cable glanding
with exchangeable measuring insert NiCr-Ni (type K), jacket thermo element, potential-free
• Ø 6 mm, flexible
Thread: • Ø 1, 1.5 or 3 mm, flexible
ote other threads are not available for small series! • Ø 0.5 mm, flexible
(For larger series on re uest)
without thread Special design types:
for interchangeable sensor application in combination with immersion ... / RT 20 with transducer for Pt100,
sleeve EST01 or with stainless steel clamping ring glanding for exact
Output signal 4-20mA, measuring ranges p.r.t. page 84
Alarm / Schut
adjustment of sensor position.

(to be stated on order!)
thread G (V4A)
for fixed mounting or for interchangeable sensor in combination with ... / T03Bu with transducer for Pt100,
immersion sleeve EST02. Output signal 0-10V, measuring ranges p.r.t. page 83
• thread G¼", G⅜" (V4A) (to be stated on order!)
other thread ... / GITT with electrically isolated transducer
for Pt100/1000, NiCr-Ni, output signal 4-20mA, measuring
range to be stated on order! (p.r.t. page 85)
other design types upon re uest
113
water proof, hermetically sealed temperature probes
Handheld instrument
for use in corrosive environments and tight places

Advantages:
highly resilient to chemicals and oils
sealed against moisture and corrosion
easily cleaned and sterilised
food safe
small size provides a fast response
TF101P
also available in custom lengths
optionally with mechanical protection (V4A-sleeve) and with thread
or clamping ring screw connection available.
Design type Pt100

TF101P-1m Pt100, cable length 1 m
Logger / EASYBus
flexible sealed PFA Pt100 sensor

4-wire-connection (4 x 0.14 mm², nickel-plated copper)
nominal diameter: 2.1 mm
accuracy according to DIN class A
temperature range: -60 ... +250 °C
also available with Pt1000
Design type NiCr-Ni (type K)

TF101K-1m NiCr-Ni, cable length 1 m
Transmitter

These PFA insulated thermocouple wire sensors are her-
metically seal-welded at the sensor tip to provide continu-
TF101K ous PFA protection over the measurement junction.
stranded NiCr-Ni-thermocouple wire (0.14 mm²)
nominal cross section: 1.6 mm x 2.5 mm
rated to +250 °C
Temperature probe
IP68 seal-welded tip

electrically-insulated junction
also available with thermocouples type J, T and E
Option:
- Water proof probe with
robust V A protective tube
Ø 3 mm, FL = 50 mm
Average temperature probe

Alarm / Protection
MWF 100 Pt100 (2-, 3- or 4-wire)

General description
The bendable average temperature probes are measuring the average temperature over the whole length of the probe and not like
the standard probes only on the sensor tip.
There are short probe length of a little centimetres as well as length of any metres (e.g. 30 m) feasible.
Application area: Measuring of the average value at long heating or cooling elements, air ducts etc.
Tell us your re uested application. e ill offer you the an individual sensor construction !
11
Self-adhesive temperature probes
Handheld instrument
with moulded silicone design for surface measurement
on curved and flat surfaces
GOF 112 Pt Pt100, 35 x 12 mm, cable length 2m, white
GOF 112 K NiCr-Ni, 35 x 12 mm, cable length 2m, green
GOF 115 Pt Pt100, 15 x 50 mm, cable length 2m, white
GOF 115 K NiCr-Ni, 15 x 50 mm, cable length 2m, green
Advantages:
12
sensor have adhesive back for easy mounting

mm
m
m ultra-slim silicone rubber for maximum flexibility
35
resistant to a variety of chemicals and oils
PFA-insulated connection cable, 2 m long (other length up on request)
2 designs for flat (GOF 112) or curved (GOF 115) surfaces available
2
11 Design type Pt100
Logger / EASYBus
F
GO
15
precision Pt100-probe, DIN class A, 4-wire connection

mm
mm temperature range: -50 ... +200 °C

50
also available with Pt1000
Design type NiCr-Ni (type K)
GOF 115 he integral thermocouple sensor is bonded onto the inner surface of the
self adhesive aluminum foil strip, which is provided for fast response time
stranded NiCr-Ni-thermocouple wire (0.14 mm²)
temperature range: -50 ... +200 °C
also available with thermocouples type J, T and E
Transmitter
Cement-On thermocouples
General description
The series GOF 120 are a model line of Cement-On, fast response thermocouples for fast surface temperature measurement. The
model line have 3 different styles. (Please order the high temperature cement separately)
The design styles 1 and 2 are made from 0.013 mm thermocouple alloy foil by a special process where the butt welded thermocou-
Temperature probe
ple junction is 0.013 mm in thickness. The thermocouples are fabricated from class 1!
These styles are flat, extremely low inertia construction and are ideal means of measuring the temperature of both flat and courved
metals, plastic and ceramic surfaces where very fast response is desired.
The design style 3 is an economy version constructed from 0.25 mm diameter bead welded standard limit of error thermocouple
wire. It should be used where extremely fast response time is not essential.
style 2 GOF 120 - K1 NiCr-Ni, cable length 90 cm, max. 260°C (short-time: 370°C)
40,6
10
GOF 120 - K2 NiCr-Ni, cable length 15 cm, max. 540°C (short-time: 650°C)
style 1 12,7 17,8
GOF 120 - K3 NiCr-Ni, cable length 90 cm, max. 260°C (short-time: 370°C)
OB-700 high temperature chemical set cement, 235 ml (max. 871°C)
Alarm / Protection
9,4
style 3
20,3 Highlights:
ultra fast response time
,7
(style 1: t63 = approx. 20 ms, style 2: approx. 5 ms, style 3: approx. 300 ms)
20, very low thermal inertia
also available with thermocouples type J (only design 3), T and E
style 1 and 3 optionally available with other lengths
Please note cannot be used with high temperature cement (will brea down insulation)
115
Industrial probes
Handheld instrument
for food-, beverage- and pharma industry

In case of interest, please ask for the Industrial probes brochure.
GTL ...
pre-assembled according to customer specification
Measuring range: 40 ... +200°C (depending on probe construction)
Sensor: Pt 100
Process connection: M12 / G1/2" / without thread

Probe head: probe head Ø 59 mm
probe head Ø 18 mm Long (with transmitter)
probe head Ø 18 mm Short (without transmitter)
Material: sensor head: V2A, protection tube and peak: V4A
Probe length: according to customer specification (in mm)
Diameter: Ø 6 mm without contraction
Ø 4 mm without contraction
Ø 6 mm with offset probe peak Ø 3 mm
Response Time: Peak Ø 6 mm: T90 ≤ 8,0 s
Logger / EASYBus
Peak Ø 4 mm: T90 ≤ 6,5 s

Peak Ø 3 mm: T90 ≤ 1,5 s
Protection class: IP69K / IP67
Options: Neck tube
Electr. connection: fixed cable (PG) or M12-plug
Integrated transmitter
Higher accuracy (1/3 DIN Kl. B / 1/10 DIN Kl. B)
Display
Accessories
1. Clamping ring screw connection GKV... st.steel (for all probes without thread)
Transmitter
Clamp. ring-
Type: Outside thread Clamping ring Price
(sensor tube- )
GKV1 Teflon
1,5 mm
GKV2 st. steel
M8 x 1
GKV3 Teflon
3,0 mm
GKV4 st. steel
GKV5 Teflon
1,5 mm
GKV6 st. steel
Temperature probe
GKV7 Teflon
G1/4" 3,0 mm
GKV8 st. steel
GKV11 Teflon
6,0 mm
GKV12 st. steel
GKV9 Teflon
6,0 mm
GKV10 st. steel
GKV13 G1/2" Teflon
8,0 mm
GKV14 st. steel
GKV15 14,0 mm Teflon
GKV16 M10x1 6,0 mm st. steel
2. Flat-pin connections, free from thermal e.m.f. ( for type K, N and S)

Alarm / Protection
NST 1200 K
NKU 1200 K
NKU 1200 O K (max. 120°C)
NST 1200 NST 1300 N
NKU 1200 O
NST 1300 U-coupling for installation in NKU 1200 NST 1700 S
NST 1700 front panels NKU 1700 NKU 1700 S
For higher temperatures use ceramic plug and coupling - price upon request.
116
3. Immersion sleeve of stainless steel
3.1. Immersion sleeve EST01 for all probes without thread .
Handheld instrument
G½" or as required
standard: G1/2", FL=100mm, outside-Ø = 6mm
for probes with 5mm Ø
6 or as required
customized lengths, diameters or threads are pos-
sible against upcharge - to be stated on order!
or as required
3.2. Immersion sleeve EST02 for all probes with a G1/2 -thread.
G½" external thread
standard: G1/2" (internal/external), FL=100mm,
outside-Ø = 8mm for probes with 6mm Ø
G½" internal thread
customized lengths, diameters or threads are pos-
sible against upcharge - to be stated on order!
or as required
For faster heat exchange we suggest:
GWL10G heat-conductive paste 10g
. Cables and lines

4.1. Silicone cable (max. 200°C) with teflon screened wires
S2P: silicone cable, 2-pole (2 x 0.25 mm²), highly flexible
S P: silicone cable, 4-pole, 4 x 0.14² cross section (insulation 2 x blue, 2 x white)
(can also used as -wire)
.2. Glass silk insulated cable (max. 00°C) with stainless steel braiding
G2P: glass silk insulated cable, 2-pole (2 x 0.22 mm²)
G3P: glass silk insulated cable, 3-pole (3 x 0.22 mm²)
G P: glass silk insulated cable, 4-pole (4 x 0.22 mm²)
Logger / EASYBus
4.3. Teflon insulated cable (max. 250°C) with individual teflon insulated wires
T2P: teflon insulated cable, 2-pole (2 x 0.14 mm²)
T3P: teflon insulated cable, 3-pole (3 x 0.14 mm²), with additional cable screen
T P: teflon insulated cable, 4-pole (4 x 0.14 mm²), with additional cable screen
. . PVC-lines (max. 70°C)
P2P: PVC cable, 2-pole (2 x 0.14 mm²)
P3P: PVC cable, 3-pole (3 x 0.14 mm²)
P P: PVC cable, 4-pole (4 x 0.14 mm²)
4.5. Extension cable for NiCr-Ni (Type K)
VKA 1m: 1 m Silicon-Compensation lines with DIN plug and DIN coupler (upcharge for additional meter)
.6. Compensation lines for NiCr-Ni (type K), 2-wire
Transmitter
AGL1: Silicone cable (2 x 0.22 mm²) (max. 200°C)
AGL3: Thermo wire (can also be used as thermo couple) glass silk (2 x 0.5 mm²) (max. 400°C)
AGL : Teflon screened twisted thermo wire, wire-Ø 0,2 mm (max. 250°C)
AGL5: Thermo wire, with glass silk braiding , wire-Ø 0,2 mm (max. 400°C)
AGL6: Teflon cable, screened - can also be used as thermo couple (2 x 0.22 mm²) (max. 250°C)
.7. Compensation lines for Pt10RH-Pt (Type S), 2-wire
AGL S2: Silicone cable (max. 200°C)
.8. Compensation lines for NiCrSi-NiSi (Type N), 2-wire
AGL N2: Silicone cable (max. 200°C)
Temperature probe
5. Metal flange (for GTF 1500/... and GTF 103HT-S)

DIN 43734, adjustable, to clamp to 15mm stainless steel pipes, sliding
6. Sensor elements (Pt100/1000, NTC s, PTC s) NiCr-Ni p.r.t. pages 106-107

Type: Description, dimensions meas. range tolerance
Pt100/1 Ceramic lamina, 2 x 2.3 x 0.6 mm -50 ... +500°C B
Pt100/2 Ceramic lamina, 2 x 2.3 x 0.6 mm -50 ... +500°C 1/3 DIN
Pt100/3 Ceramic lamina, 2 x 5 x 0.9 mm -196 ... +500°C B
Pt100/4 Wound design, Ø2 x 20 mm -200 ... +600°C B
Alarm / Protection
Pt100/5 TO92-housing -50 ... +150°C B

Pt1000/2 TO92-housing -50 ... +150°C B
KTY 81-210 Replacement for KTY 11-6 -20 ... +110°C
KTY 81-121 1kOhm (25°C), TO92-housing -50 ... +150°C
KTY 83-110 1kOhm (25°C), DO-34-housing -50 ... +175°C
KTY 84-130 1kOhm (100°C), DO-34-housing -40 ... +300°C
ther sensors upon re uest
117
Miniature alarm device for Protection device for univer- Plug-in level controller
universal application battery sal application with switching no moving parts at all
Handheld instrument
or mains operation output for any purpose

Available as plug-in
MINIATURE ALARM DEVICE ALARM PROTECTION DEVICE ELECTRODE CONTROL DEVICE

for universal application with or without alarm transmitter and relay switch-
ing output (changeover contact) for filling or emptying
MINAL 182 ALSCHU 480 ALSCHU 485

Logger / EASYBus
Battery operation plug-in for 230V~ (with grounding contact adapter plug)
ALSCHU 485 OE
MINAL 282 BN ALSCHU 480 P s o e, ut without e ectro es connect for two in e ectro es
Battery/mains operation as above, but with volt-free switching output
Devices without sensors Description:The ALSCHU 480(P) is a versatile

ALSCHU 485 OE / 3P
s o e, ut without e ectro es connection for 3 in e ectro e
Application: extra loud alarm (more than 100 dB alarm and protection device. Its universal input
at 1 m distance), hence suitable for decentralised (3.5mm jack bush) allows a lot of different external We manufacture electrodes of any diameter
use (eg in basement etc.). After connection of vari- sensors to be connected. That includes sensors and length according to your specifications
ous sensors device can be used as water detector, with a switching threshold <100kOhm like water Application: automatic control of drain pumps
burglar alarm, fire alarm (overheating), heating sensors, float switches, level switches, magnetic
contacts, safety shut-off mat etc. In case of an and sewage removal plants, overflow and dry
failure detector, level detector, rain detector etc.. running protection, automatic filling and emptying
Advantages: mobile, no power consumption un- alarm the internal buzzer sounds and a connected
device (i.e. pump, machine) is switched on or off of containers, basins, tanks, control of liquid level
less alarm sounded; connection of any number of in storage tanks, aquariums, etc.
via the Schuko adaptor plug (ALSCHU 480). The
sensors, separately or simultaneously; loud alarm
desired switching function can be set via selector Advantages: no installation costs, only plug-in
Transmitter
that cannot be missed. switch I / II. ALSCHU 480P switches on/off exter- connections, ready for use within seconds, trou-
Specification: nal devices via a potential-free 2-pole switching ble-free operation as no moveable float switches
Device: rocker switch for tightening and alarm output. The Schuko socket of ALSCHU 480P is are used, any electrode distance, can be set by
extinguishing, audible piezo-alarm, power always current-carrying. customer up to 2 m etc. etc..
consumption in case of alarm approx. 20 mA. Specification:
Permanent alarm can be sounded for at least Specification:
approx. 10 h. Control device: housing 112 x 71 x 48 mm.
Power supply: 220/240V 50/60Hz
ABS case 100 x 60 x 29 mm (H x W x D) Flashing LED indicating control state. Selector switch
Power consumption: approx. 1 VA for emptying or filling. Plug-in socket for electrodes.
Operating voltage: 9 to 12 VDC, battery 9 V type Sensor input: 3.5mm jack bush
IEC 6F22 included, for MINAL 282 BN additional Power supply: control device 230 V 50 Hz ap-
Switching threshold: input resistance
socket for plug-in of external power supply GNG09 prox. 1 VA, automatic by connecting grounded
<100kOhm
for permanent operation. adaptor plug.
Switching output:
Temperature probe
MINAL 182 only suitable for battery operation. 480: via isolated ground receptacle Control output: via grounded adaptor plug with
(Schuko) earthing and socket outlet with earthing, electrode
Sensors: jack for connection of any sensor type
480P: potential-free normally open/ control. Direct switching capacity approx. 1200 VA
(see special accessories).
closed contact via 2-pole cable, at 230 V 50 Hz (approx. 5 A ohmic load). Extra
Weight: approx. 105 g (incl. battery - without high protective capacity by external triggering of
sensor) brought out 0.5m
Switching function: a contactor or semiconductor relay.
Accessories: I: switching out put current-carrying Electrodes: standard design: plug-in, stainless
GNG 09 - 3.5KS power supply in alarm condition steel pins, plastic body and 2 m of PVC cable (any
GWF-1S plug-in water sensor, 2m II: switching output currentless in lengths against upcharge)
alarm condition
GWF-1S / 5m plug-in water sensor, 5m Switching power: Please note: for media leaving residues (such as
GWF-1S / 10m plug-in water sensor, 10m 480, 480P: 250VAC, 10A (ohmic load), salt water, sewage etc.) we recommend a 3-pin
GAZ-1 branch adapter (required max. 2400VA electrode.
for each additional water sensor) 480P: 120VDC, 2 A (ohmic load),
max. 240W
Alarm / Protection
GSS-1S level probe (plug-in float switch)

for electrically non-conductive media (normally open/
normally closed function can be selected by customer) Controlling device:
GNS-1S plug-in level probe 2-pin dimensions: 112 x 71 x 48mm (L x W x H),
(stainless steel electrodes) LED for operation display, device-on/off, selector
switch I / II for switching function
GSAS-1S plug-in, self-adhesive Working conditions: -20…50°C / 0…80% RH
magnetic contact
VEKA 2 extension cable 2m GNS-3P level probe 3-pin € 38,80
VEKA 5 extension cable 5m
Accessories and spare parts: standard length: 15 cm,
GWF-1S plug-in water sensor, 2m switching distance: 1cm, 2m cable
VEKA 10 extension cable 10m further information p.r.t. page 121
GSAS-1S plug-in, self-adhesive
magnetic contact
118
No more water damage
24-hour supervision of your washing machine No more water damage
and/or dish washer or any other devices using
Handheld instrument
water.
GEWAS 181 A
leak-water detector with ½" brass solenoid valve with ¾" connections for hand installation,
water sensor, alarm buzzer and switch-off of connected units 16A, 230V
WATER LEAK DETECTOR GEWAS 183 A

WITH SOLENOID VALVE leak water detector without solenoid valve, with water sensor, alarm buzzer and switchoff
of connected devices 16A, 230V
GEWAS 191 N
cpl. and ready for use incl. controller, water GEWAS 181 A -
Logger / EASYBus
probe, solenoid, signal buzzer
leak water detector with ½" brass solenoid valve (flow quantity: approx. 20 l/Min, instal-lation
length approx. 55mm) for installation in the line, water sensor, alarm buzzer and switch-off
GEWAS 191 AN of connected devices 16A, 230V~. Device is capable to drive more valves.
cpl. as above but equipped with switch-off
mechanism for supervised device in case of
alarm (up to 16A, 220 V 50 Hz) GEWAS 181 A -
Application: washing machine, dish washer, surger- leak water detector with ¾" brass solenoid valve (flow quantity: approx. 91.5 l/Min, instal-
ies (eg dentists’ surgeries, water-cooled devices etc.), lation length approx. 80mm) for installation in the line, water sensor, alarm buzzer and
hospitals, industry, research, laboratories, any other switch-off of connected devices 16A, 230V~
devices and machines with water connection (eg. hot
drinks dispensers, cooling devices etc.)
Installation: easy to install - even for unskilled
GEWAS 181 A - 1
leak water detector with 1" brass solenoid valve (flow quantity: approx. 141.5 l/Min, instal-
persons - in two minutes without any additional lation length approx. 95mm) for installation in the line, water sensor, alarm buzzer and
parts or tools being required. switch-off of connected devices 16A, 230V~
Solenoid valve: glass-fibre reinforced polyamide
(also used for washing machines). Extra low voltage Application: any devices or machines with water connection. For direct mounting of solenoid valve
Transmitter
for safety 12 V DC. Screw connections 3/4" for direct in pipelines.
mounting to water tap or any other standard wash-
ing machine or dish washer connecting tube 1/2 Specification:
“ with 3/4” wing/union nut at valve outlet. Valve Solenoid valve: Brass solenoid valve, energy-saving circuitry for hand installation (1/2” with 3/4”
closes automatically in case of power failure. (Min. glanding - suitable for any 1/2” tap or 1/2” tube) or with ½”, 3/4” or 1” internal thread on both sides for
pressure difference between inlet and outlet: feed line installation. De-energised when closed, for pressure loads from 0.5 to 10 bar. Servo-controlled,
pressure min. 0.5 bar over discharge pressure) i.e. free water outlet has to be provided resp. infeed pressure has to exceed outfeed pressure by 0.5
Water sensor: highly sensitive plug-in water probe, bar (solenoid not suitable for closed circuits such as heating systems).
2 m cable. Alarm triggered as of 1/2 mm water film.
Several water probes can be plugged-in and used si- Electric specification:
multaneously by means of socket outlet adaptor GAZ 1. Solenoid: 100 V DC, approx. 2 W. Full load of approx. 8 watt available when start button is pressed
2 m, 5 m or 10 m plug-in extension cable available. at approx. 200 V DC. Hence, valve operable in permanent mode; due to energy-saving circuit valve
Temperature probe
Alarm triggering: in case of an alarm the valve will not run hot even without cooling agent. Valve permanently fixed to control device (approx. 1 m of
closes, the signal buzzer is sounding and the de- connecting cable). Valve body can be removed from coil after loosening of one nut.
vice connected is switched off (only for GEWAS Water sensor: highly sensitive, plug-in water sensor, 2 m of cable, alarm triggered as of ½ mm water
191 AN - single pole one-way switch)
film. Simultaneous plug in of several water sensors via socket-outlet adaptor GAZ1. Plug-in extension
Device housing with electronics: enclosed case cable (2 m, 5 m or 10 m long) available.
(not suitable for use in humid environment), electronics,
signal buzzer, plug connections for valve and water Alarm triggering: Solenoid closing in case of alarm, buzzer sounding and machine connected will
sensor. Housing with earthing pin plug connection and turned off by means of a single-pole one-way switch.
socket outlet with earthing contact. Looping-in socket Control device: 112 x 71 x 48 mm (H x W x D) with suspension hook. Operating lamps, double-pole switch,
outlet with earthing contact used for GEWAS 191 A; start button, alarm buzzer, approx. 1 m of connecting cable with earthing pin plug and socket. Socket (16
alarm controlled socket outlet with earthing contact used A 230 V~) is alarm triggered, i.e. the device plugged-in will be disconnected in case of alarm.
for GEWAS 191 AN, ie up to 16 A (ohmic load) and 220
V 50 Hz will be switched off in case of alarm. Power consumption: approx. 3 W only due to energy-saving circuit of solenoid valve.
Power consumption: approx. 3 W only using Spare or additional solenoid valves:
energy-saving circuitry.
Alarm / Protection
GMV- L spare solenoid valve ½" for direct cable connection, approx. 1m cable, loose ends
Accessories and spare parts:
GMV- H spare solenoid valve ¾" manual mounting, approx. 1m cable, loose ends
GMV191 spare solenoid
GMV- spare solenoid valve ¾" for direct cable connection, approx. 1m cable, loose ends
GWF-1S plug-in water sensor, 2m
GWF-1S / 5m plug-in water sensor, 5m GMV-1 spare solenoid valve 1" for direct cable connection, approx. 1m cable, loose ends
GWF-1S / 10m plug-in water sensor, 10m GMV- EZL add. solenoid valve 1/2" for direct cable connection, with power saving connector
approx. 2W, for direct connection to 230VAC, suitable for GEWAS183A or mains operation
GAZ-1 branch adapter (required
for each additional water sensor) GMV- EZH like before, but ¾" valve for manual mounting
VEKA 2 extension cable 2m GMV- EZ like before, but ¾" valve for direct cable connection
VEKA 5 extension cable 5m GMV-1 EZ like before, but 1" valve for direct cable connection
VEKA 10 extension cable 10m Accessories: plug-in water sensor, socket outlet adapter, extension cable p.r.t. GEWAS 191
119
Protection device for universal application Protective device for monitoring the level
with switching output for any purpose (z.B. water level)
Handheld instrument
panel mounted device
W
NE
Application for
Water
Oil
Gasoline
Solid products as powder
or granular
GEWAS 200 No moving parts
Panel-mounted alarm protection device with volt-free Sealed
relay output (snap-on mounting for top hat rail in spe- High reliability
cial snap-on housing) Without Sensor
Logger / EASYBus
The GEWAS 200 is a versatile DIN rail alarm and protection device. Its
universal input (screw terminals) allows a lot of different external sen-
sors to be connected. That includes sensors with a switching threshold
<100kOhm like water sensors, float switches, level switches, magnetic
GNS-SCV-W
Probe for application in water and all conductive liquids
contacts, etc. A connected device (i.e. pump, machine) is switched on or
off via potential-free change-over contact in case of an alarm. The alarm is GNS-SCV-Z
reset by the use of an internal / external reset button. Probe for application in oil and all no-conductive liquids
Specification: The GNS-SCV capacitive probes are the best way to monitor the level
condition of liquids as water, oil gasoline and solid products as powder
Power supply: 220/240V 50/60Hz
and garanular.
Power consumption: approx. 3 VA
Transmitter
Sensor input: 2-pole screw terminal

Specification:
Switching threshold: input resistance <100kOhm
Power supply: 12 ... 35 V DC / 5 mA
Switching output: potential-free change-over contact
Electrical output: NPN no-active / max. 3 W
Switching power: 250VAC, 10A (ohmic load), max 2400VA Electrical connection: Plug DIN 43650
150VDC, 2A (ohmic load), max 240W Process connection: 1/4" NPT, Brass
Controlling device: dimensions: 49 x 96 x 59mm (L x W x H), Switch delay: 4 sec.
LED (green) for operation display, LED (red) for alarm condition Electrode: Cu-Zn
Mounting: universal foot base for all common DIN EN rails Electrode coating: PTFE
Electrode length: 50 mm
Working conditions: -20…50°C and 0…80% RH
Switch point: 40 mm ± 2 mm (vertical mounting)
Temperature probe
on the axis of SCV (horizontal mounting)

Options: Pressure max.: 25 bar
Temperature max.: -30 ... +125 °C
- KL: Screw terminal (2-pole)
Dimensions:
to connect an external reset button
SW A B L0 L1
- AL: Automatic alarm reset 24 mm 74 mm 10 mm 50 mm 40 mm ± 2 mm
Accessories and spare parts:

GWF-1 water sensor without plug, 2m
GSS-1 level probe (plug-in float switch)
for electrically non-conductive media (normally open/normally
Alarm / Protection
closed function can be selected by customer)

GNS-1 plug-in level probe 2-pin
(stainless steel electrodes)
GSAS-1 plug-in, self-adhesive
magnetic contact
120
3-pin. probe for level control 3-pin. probe for level control
Handheld instrument
W
NE
Coated electrodes
For all industrial
Rugged construction, Applications
sealed
Alarm-, Level- und
DIN 43650 plug Doseregulation
Protection class IP65 In Addition with control
For all industrial, beverage and electronic
food applications (ALSCHU 485 OE / 3P,
GEWAS 200 oder MINAL)
Alarm or level regulation or
very accurate control
dosage of liquids
system
Combined with control electro-
Optional teflon covered
nics (ALSCHU 485 OE / 3P,
staffs
GEWAS 200 or MINAL) an
accurate liquids level control
system
Logger / EASYBus
GNS-3P-SLV GNS-3P
Probe with 3 electrodes with Poliolefin coating 3-pin. level probe
suitabel for ● cooling water
● all conductive liquids Please note: for media leaving residues (such as salt water,
sewage etc.) we recommend a 3-pin electrode.
GNS-3P-SLK Specification:
Probe with 3 electrodes with Kynar coating
Transmitter
Number of electrodes: 3 Piece
suitable for ● food and beverage industry
Lenght of electrodes: 150 mm (other upon request)
● chemical industry Probes can be cutted to needed lenght.
Electrical connection: 2 m cable
Switching distance: 10 mm
GNS-3P-SLE
Probe with 3 electrodes with PTFE coating
suitable for ● aggressive conductive liquids Options:
other length available.
Specification: Upcharge each beginning 10cm
Temperature probe
Number of electrodes: 3 Piece

Lenght of electrodes: 1000 mm
Teflon covered staffs
only tip is uncovered (for electrodes used in salt water, ...)
Probes can be cutted to needed lenght.
Electrical connection: DIN 43650 Plug
Process connection: G 1", Polypropylen Dimensions:
Pressure max.: 6 bar
Temperature max.: +100 °C Elektrodenlänge: 150 mm
Protection class: IP65 Elektrodendurchmesser: 3 mm
Elektronikbox: 55 mm x 35 mm (B x H)
Dimensions:
Alarm / Protection
SW: 40 mm
A: 68 mm
B: 20 mm
L: 1000 mm
121
OEM- / customer-specific designs
Handmessger te
You have not found a device fulfilling all your requirements completely? No problem, we can modify the de-
vices to your specific needs.
I.) Optical customi ation

- Colours of housing according to your wishes
If we have the colour in stock, we can change the default cover colour to your desired one.
For larger orders it is also possible to have the housings specifically manufactured to your wishes.
- Modified label
An eigen / Regler
Do you want your logo on the device or the type designation matching to your name policy?
II.) Hardware and software modifications

To a certain extend the hardware or software can be modified to your requirements.
For example this are realized modifications to customer's specifications:
- Modifying the hardware to another probe characteristic
- Creating an additional material characteristic for the GMH 38xx - series
- and many more
Logger / EASYBus
III.) Customer-specific developments

If there is no device in our standard product proposal fulfilling your individual requirements, there is the pos-
sibility to develop a device according to your specifications.
lease co n ta ct u s e ll d o o u r b e st to fu l f i l y our i s he s . . .
Synergies
Messumformer
The merger of the companies

Temperaturf hler
results in enhanced competence, optimum service and best advice for all aspects of measurement and control tech-
nology.
We offer so a complete product portfolio for the requirements of the following segments:
Laboratory Measurement
Industrial Electronics
Alarm / Schut
Process Engineering
Industrial Measurement
Test Bench Measurement
A subsidiary of
... Pr ofess ional Metrology "MADE IN GERMAN Y"
122
Alphabet ic Inde x
A-10 90 GES 900 106 GMK 100 17 GST 91 18 KTY 117
AAG 2m 43 GEWAS 1 119 GMK 38 18 GT1 , GT10... 92 LAN 3000 79
AGL 117 GEWAS 200 120 GMK 3810 19 GTA 0420 60 LC 102
AKL 1P 78 GFN 13 GMR 100 19 GTD 1100 27 LFE 200, LFE 202 95
ALSCHU 118 GFTB 100 15 GMS 300/91 18 GTE 130 OK 107
APG 56 GFTH 200 14 GMSD 22/23 MINAL 118
GTF 1000 AL 106 MINIDIN 4S 43
CaCl 37 GFTH 95 14 GMTL 1826 - MT4 10 GTF 101 112
GGD 2448 SET 47 GMUD 89 MODEM 79
CR 2032 62 GTF 101 - Ex 111 MP 8082 56
GGD 4896 49 GMV 119 GTF 101 - 5 109
D53-3P 56 GGF 175 104 GNG 09 43 MSD 23
D53 TP50D 56 GTF 101 - N 110 MSK 100 29
GGF 200 107 GNG 10 43 GTF 102 112
DFM 232 SET 79 GGO 31 GNG 12 / 57 MU 86
GTF 102 - Ex 111 MWF 100 114
EAK 36 49 GHE 91 18 GNG 12-LE 79 GTF 103 113
EASYBUS.DLL 78 GHTU 88 GNG 2 57 GTF 103 - Ex 111 NKU 116
EASYControlnet 77 GIA 0420 44 GNG 89... 43 GTF 103 HT-S 110 NST 116
EASYLOG 24RFT 64 GIA 0420 VO 58 GNR 10 57 GTF 103 OS 113 OB-700 115
EASYLOG 40BIN 65 GIA 0420 WK 58 GNR 232A 79 GTF 1200 106 OXY 36 93
EASYLOG 40IMP 63 GIA 20 46 GNS-3P 121 GTF 1400B 110
EASYLOG 40K 63 GIA 2000 49 GNS-C1, GNS-C2 101 P2P, P3P, P4P 117
GTF 1500 110
EASYLOG 40NS ... 64 GIA 2448 45 GNS-KIT 102 PG 13.5 37
GTF 175 104
EASYLOG 80CL 65 GIM 1840 11 GNS-SCV 120 ProfiLab-Expert 4.0 41
GTF 199 53
EB 2000 MC 75 GIM 3590 11 GNT 0520 96 PW 25 17
GTF 200 112
EB 3000 74 GIM 530 MS 10 GNTP 82 GTF 2000 104 R 38 54
EBB ... IN 78 GIR 2000 53 GOEL 31 GTF 2000 LE 104 RC-Glied 56
EBB...OUT 79 GIR 2002 50 GOF 112 115 GTF 2000 WD 104 RRI 98
EBG - 73 GIR 2002 / SW 52 GOF 115 115 GTF 2000 WD - B 94 RT 420 84
EBHT 70 GIR 2002 NS 52 GOF 120 115 GTF 2000 WD - LE 104 RW-015HKL 101
EBN 72 GIR 2002 PID 50 GOF 130 105 GTF 230S 47 RWI-016 101
EBS 20M / 60M 77 GIR 2002 PID / SW 52 GOF 175 104 GTF 300 107 S-10 91
EBSK 78 GIR 230 47 GOF 200 HO 105 GTF 35 103 S-11 91
EBT 71/72 GITT 01 85 GOF 400 105 GTF 38 18 S2P, S4P 117
EBUW 232A 79 GKF 125 106 GOF 401 Mini 103 GTF 400 106 SCX 60
EBW 76 GKF 250 107 GOF 500 105 GTF 401 103 SET 38 18
EF 97 GKK 42 GOF 900 HO 105 GTF 601 103 ST 500 - Ex - 10 - 86
EL-USB 61 GKL 33 GOG 30 GTF 900 106 STE 13
EPI 99 GKN 3600 39 GOK 91 18
GTH 1150 9 ST- 42
ESA 100 29 GKS 3600 39 GOO 31
GTH 1150 EG 48 STS 13
ESA 369 31 GKV 116 GOX 100 31
ESK-1 66 GLF 100 33 GOX 20 38 GTH 1170 9 T03 BU / WE 83
EST 117 GLF 175 104 GPAD 38 18 GTH 175/Pt ... 7 T2P, T3P, T4P 117
GLF 401 Mini 103 GPB 3300 27 GTH 2448 / 45 TA 410 40
FCM - 98 GTL 116
GLG 1300 43 GPD 60 TF 1012 114
FHK 99 GTL 130 106
GLI 9V 43 GPF 100 36 TRM ... 87
FH-Messing 99 GTMU 81
GLMU 95 GPH 014 38 TFS 0100E 13
FS3T 46 GTMU - IF 83
GLP 91 18 GPH 37 TLK 55
G2P, G3P, G4P 117 GLS 500 107 GPHU 014 MP 94 GTMU - MP 80 T-Logg 62
GAD 37 GMDP 89 GPRT1400 AN 38 GTMU - OMU 81
USB 100 62
GAF 200 106 GMF 1 110 GPT 60 GTO 130 OK 107
USB 3100 43
GAK 9 V 43 GMF 2 107 GPV 220 60 GTP 82
USB-Adapter 43
GAK 1400 37 GMF 3 110 GR 10 57 GTT 108
GAM 3000 43 GMFL 117 GRA 59 GTT 1150 OK 107 VD 120 36
GAS 100 29 GRF 200 107 GTU-2R-OMU 81 VEKA 3105 43
GMH 11 ... 9 GTU 300 / 152 60 VISION 2008 100
GAS 3600 38 GRHU 88
GMH 1300 42 GT 300 105 VKA 1m 117
GB 9 V 43 GRL 100 37
GMH 175 7 GVA 0430 40 VSL 2P 78
GBF 1550 110 GRMU 2000 MP 94
GMH 3000.DLL 41 GWA 1214 90 VTH 25 MS - 180 100
GBS 01, GBS 02 90 GRO 200 112
GMH 3111 20 GWA 1 37
GBSK 91 18 GRP 100 37 WP 4
GMH 3151 21 GWH 66
GBSL 91 18 GRS 01/9, GRS 02/9 78
GMH 3156 21 GWL 10G 112 OT 369 29, 31
GCO 100 29 GRS 31 43
GMH 3161 - 24, 25 GWO 3600 39
GDH ... AN 28 GRV 100 29
GMH 3181 - 24, 25 GWO 3600 MU 93
GDH 200 26 GSA 78
GMH 32 8 GWOK 01 39
GDUSB 1000 61 GSE 91 18
GMH 33... 12 GW -01 33
GD 22, 23, 91 GSF 38 18
GMH 3430 32 G -01 G -04 92
GE 014 37 GSG 91 18
GMH 3530 34 G -10 29
GE 1 36, 37 GSH 8922 40
GMH 3610 39
GEF 38 18 GSKA 3600 39 Heumesssonde 16
GMH 3630 39
GEG 91 18 GSMU 96 HLR 50A 56
GMH 3691 30
GEH 1 42 GSN 24 92
GMH 3710 ... 5 IR-CT 20 87
GES 130 106 GSOFT 3050 41
GMH 3730 ... 5
GES 175 104 GSOFT 40K 67 K31, K32 54
GMH 3810 19
GES 21K 106 GSOFT 40K - Update 67 KCL 3 M 37
GMH 3830 18
GES 38 18 GSP 91 18 KF 2000 45
GMH 3850 19
GES 401 103 GSS-F25 100 KM4P 97
GES 500 106 GMI 15 17 GST 3810 19 KOH 100 39
123
Please visit our webside:
www.greisinger.de
• Launch of new products

• Price information
• Direct ordering facility
• Software download
• Instruction manual
• FAQ area
Catalog prices valid as of january 01.01.2011 Catalog is subject to technical and commercial changes!
All prices are plus delivery charges and VAT
GREISINGER electronic GmbH

D - 93128 Regenstauf • Hans-Sachs-Straße 26
01/2011

+49 (0) 94 02 / 93 83 - 0 www.greisinger.de
+49 (0) 94 02 / 93 83 - 33 info@greisinger.de

Catalogue 2011 22

Uploaded by

Copyright:

Available Formats

Catalogue 2011 22

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue 2011 22

Uploaded by

Copyright:

Available Formats

Digital Indicators • Data Loggers • Bus systems • Remote Inquiry • Temperature Probes • Alarm Protection Devices • Software • EASYBus

More than 30 years GREISINGER electronic

HANDHELD INSTRUMENTS (with sensors and accessories)

Data logger / EASYBus

Which certiﬁcate will be required ?

1. Readjustment: (without certiﬁcate of calibration) Readjsutment of the device

Certiﬁcate of calibration WPT3 pH:

3. DKD calibration certiﬁcates: guiding price - exact costs on request.

Complete Solutions: Komplett

as well as additional arrows. (for tech. data please refer to p. 103)

power supply: GNG10/3000)

• Robust and with good grip

• High accuracy (±0.1 °C ±1 digit)

• Automatic freezing of constant

measuring value (Auto-Hold)

• Battery life time > 6000 hours

GMH 2710 Temperature measuring device incl. universal probe

Field of application Technical data

Probe: Pt1000, 2-wire, potential-free,

• Automatic freezing of constant measuring value Working temperature: -25 to +50 °C

GTH 175/Pt GMH 175

Dimensions approx. 142 x 71 x 26 mm (H x W x D).

GTH 175/Pt-K core temperature meas. instrument Accessories

W for soft media

Additional functions of GMH 3 30 and GMH 3 50

Additional functions of the GMH 3 50

2 integrated logger functions

Additional functions of the GMH 3 10

GMH 3210 accessories not incl. for connection of 1 plug-in probes

accessories not incl. for simultaneous connection of plug-in probes

Speciﬁcation: GMH 3 10 GMH 3 30 GMH 3 50 General Functional Description

- manuelly 99 data sets (data recall via

GTH 1150 GTH 1170

additional NiCr-Ni probes p.r.t. page 105 - 109

at low cost price

Adjustable visible and audible alarm

Optical resolution 20:1

Constant measuring area in between

Targeting laser for exact aiming of the

Fast scanning of hot and cold spots

GMTL 1826 - MT4 GIM 530 MS

The GMTL1826-MT4 is compact, light-weight and

Range: -18 ... +400°C (0 ... +752°F)

Working temperature: 0 ... 50 °C Spectral range 8 - 14 m

(275 x 229 x 83 mm) with foam lining Accessories

Data memory -- 12 measurings 12 measurings Data logger 100 measurements protocols

Storage cpl. device with carrying bag and hand loop

Double display of humidity and temperature

connection, suitable for: 3330 3350 3 30 3 50 (p.r.t. page 42)

TFS 0100 E 0 0 ... 100 0 r.h. STS 005 0 05 ... 5 00 m/sec.

tion cable with 6-pin Mini-DIN-plug

Spare snap-on head STS 0 0

GTF 300 (p.r.t. page 107)

Digital-Hygro-/Thermometer Digital-Hygro-/Thermometer Measuring set

Resolution: 0.1°C or 0.1 %RH. min-/max-value memory for all measurements

Display: 3½-digit, 13mm high LCD-display audible alarm below dewpoint

(for suitable probes p.r.t. page 92)

Resolution: 0.1%RH, 0,1°C/°F, 0.1mbar - KIT USB-interface kit, consisting of:

the GFTB 100 SET makes it easy to check mould-

GRS3105 resp. USB3100 (accessories).