Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 246 views

    Lectra Modaris

    Uploaded by

    Nabil Hassan
    This document provides instructions for creating a basic t-shirt pattern using Lectra Modaris pattern making software. It outlines steps to insert size information, draft the front and back pattern pieces, add seam allowance, divide the pieces, unfold the pattern, and add grain lines. The instructions include screenshots from the software and describe which tools to use for each pattern drafting and editing task. The goal is to demonstrate the process of generating a digital t-shirt pattern file using Lectra Modaris.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lectra Modaris

    Uploaded by

    Nabil Hassan
    246 views29 pages
    This document provides instructions for creating a basic t-shirt pattern using Lectra Modaris pattern making software. It outlines steps to insert size information, draft the front and back pattern pieces, add seam allowance, divide the pieces, unfold the pattern, and add grain lines. The instructions include screenshots from the software and describe which tools to use for each pattern drafting and editing task. The goal is to demonstrate the process of generating a digital t-shirt pattern file using Lectra Modaris.

    Original Title

    LectraModaris

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for creating a basic t-shirt pattern using Lectra Modaris pattern making software. It outlines steps to insert size information, draft the front and back pattern pieces, add seam allowance, divide the pieces, unfold the pattern, and add grain lines. The instructions include screenshots from the software and describe which tools to use for each pattern drafting and editing task. The goal is to demonstrate the process of generating a digital t-shirt pattern file using Lectra Modaris.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    246 views29 pages

    Lectra Modaris

    Uploaded by

    Nabil Hassan
    This document provides instructions for creating a basic t-shirt pattern using Lectra Modaris pattern making software. It outlines steps to insert size information, draft the front and back pattern pieces, add seam allowance, divide the pieces, unfold the pattern, and add grain lines. The instructions include screenshots from the software and describe which tools to use for each pattern drafting and editing task. The goal is to demonstrate the process of generating a digital t-shirt pattern file using Lectra Modaris.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 29

    See discussions, stats, and author profiles for this publication at: https://www.researchgate.

    net/publication/349052616

    T-shirt pattern & Lectra Modaris

    Experiment Findings · February 2021


    DOI: 10.13140/RG.2.2.22969.70245

    CITATIONS READS
    0 7,359

    1 author:

    Md. Shafiul Arefin


    BGMEA University of Fashion and Technology
    3 PUBLICATIONS   7 CITATIONS   

    SEE PROFILE

    Some of the authors of this publication are also working on these related projects:

    Making T-shirt Pattern by lectra Modaris View project

    Apparel Technology View project

    All content following this page was uploaded by Md. Shafiul Arefin on 05 February 2021.

    The user has requested enhancement of the downloaded file.


    BGMEA University of Fashion & Technology
    Apparel Manufacturing & Technology
    Course Code: PAT3202

    Course Title: Pattern Grading & CAD (Lab)

    Lectra Modaris

    Prepare by:
    Md. Shafiul Arefin Pial
    shafiulpial@gmail.com /
    181-071-101@buft.edu.bd
    Mobile: +8801963465334
    Lectra Modaris New file open and size
    insertion.

    Install and Open modaris Software

    Tap on “File” option and click on “new”

    Give a title and click on “lock”


    Set File “Access Paths” by tap on “File” bar

    Click on “Access Paths” and Insert Exact File destination


    and Click on “OK” Button
    Tap on “sheet” and click on “new sheet”

    Tap on Display and “Sizes” and “Title blocks”


    Make a Documet file and write “alpha” and Insert All size and
    highlight expected size like “*L”

    Go to “F7” select “Imp.Evt” and click on this “new sheet”


    and open document/ notepad file
    Size level is created
    MEASUREMENT TABLE

    Serial MEASUREMENT IN CM SIZE (CM)

    1 TOTAL LENGTH 72

    2 ½ CHEST 52

    3 ½ BOTTOM 52

    4 SHOULDER TO SHOULDER 43

    5 NECK WIDTH 22

    6 SLEEVE LENGTH 20

    7 BICEP 23

    8 SLEEVE OPENING 19

    9 ARMHOLE STRAIGHT 26

    10 NECK DROP FRONT 15

    11 NECK DROP BACK 3

    12 UNDER SLEEVE LENGTH 10

    Order Qty (Pcs) 1 pcs


    Basic T-Shirt Drafting (Part-01)

    Select “F2” From modaris

    Then select “Rectangle”


    Click mouse’s “left button” on new sheet

    Select “down Arrow” for entering full length and half chest
    measurement
    Press “Enter” button.

    Basic T-Shirt Drafting

    Click mouse’s “left button” on new sheet


    Select “down Arrow” for entering sleeve length and Bicep
    measurement

    Press “Enter” button


    Basic T-shirt Drafting Part 02

    Go to “F3” and select “Parallel”

    Press “left button” of your mouse from upper side of this rectangle
    Insert expected (neck drop) (back) size by pressing “down arrow”

    Insert expected (neck drop) (Front) size by pressing “down arrow”


    Insert expected Armhole Straight size from (neck drop) ( Back) by pressing
    “down arrow”

    Insert expected (neck width ½) size from Right side of this Rectangle
    Insert expected (Shoulder to Shoulder) size from Right side of this
    Rectangle

    Mark Shoulder line point by using intersection


    Use “Bezier” from “F1” for back neck (started by Left click and ended by
    right click)

    Use “Bezier” from “F1” for Front neck (started by Left click and ended by
    right click)
    Use “Bezier” from “F1” for Armhole (started by Left click and ended by right
    click)

    Use “Straight” from “F1” for Shoulder (started by Left click and ended by
    right click)
    Turn on “Handle” From “Display” option

    Then click on “F3” and select “Reshape” option


    Select zoom Button for make working area in zoom and selecting expected
    area by clicking left button on this Area

    Give exact shape by clicking on “left button” on handle and insert by “right
    button”
    For expected (Bicep) measurement take “Parallel” line from right side of
    rectangle

    For taking (Under Sleeve length) select “Straight” From “F3”

    And then take straight line from lower side of Bicep line
    Now insert exact measurement on “dl” and make intersection in left side of
    rectangle

    Take a “Bazier” from upper side of (under sleeve length) to upper angle of
    right side of rectangle
    Now reshape this “bazier” as required as previous
    How to extract Pattern & give seam
    allowance by (Lectra Modaris) software

    Undo “handle” from “display”

    Now go to “F3” select “Delection” and remove line and intersection


    point that is not relevant with pattern
    Divide Front, Back part and sleeve by “Seam” from “F4”

    Give seam allowance select “select” button and press on “Shift”


    button and select expected line
    Now select “Line Seam” from “F4” and click “left” button insert
    expected measurement and finished by “Enter” button

    Add a corner on sleeve by “Add Corner” from “F4” and select


    “Previous Perpendicular” and then select on this sleeve corner
    For unfold this pattern go to “F5” and select “Sym2Pts” click “left
    button” from top of pattern from right side and make this line to
    bottom of right side and insert by “right button”

    Now inserting Grain Line by “Axis” from “F4” and then select “Grain
    line axis DF”
    Make “dx’ 00 to get Vertical Line

    Now it’s ready

    The End

    View publication stats

    You might also like