AFP I2 190325
AFP I2 190325
AFP I2 190325
ID Chip
30µL
4
Draw the
detection buffer tube
Detection
Buffer Tube
2 Add it into
detection buffer tube 8 Press ‘Select’
75µL
In case of Serum,Plasma,Control
1
Draw
Serum, Plasma, Control
Reader 9 Read the test result
15µL
Just right Too little or Bubble
Result
In the middle or near
the top of the tip
2
Add it into
detection buffer tube
75µL
Important
Allow ‘Detection Buffer Tube’ to attain
room temperature at least for 15µL
Rev.01.190325_AFP
30 minutes before performing the test
For technical assistance; please contact: Tel: +82-33-243-1400 This reference guide is only as a quick reminder of main steps of the
Boditech Med Inc.’ Technical Services Fax: +82-33-243-9373 procedure. Please check the instruction for use for full description of
www.boditech.co.kr E-mail: sales@boditech.co.kr procedure and of any changes which may have been implemented
to the procedure. Company declines any responsibility in case of not
fully following the instructions of use provided with the reagents.