HYDRAULIC EXCAVATOR Operating Weight - 21500 Kg

Engine Power - 141.4 hp

XE215i-K LC Engine Make - Cummins

Bucket - 0.9 - 1.2 cu.m
ADVANCED CONFIGURATION XE215i-K LC

Sturdy Structure Efficient and Economical Top Notch Operator Cabin

Reinforced Boom, Arm and Bucket for Tough Indian Conditions Reliable Cummins India Engine ensures Optimum Power All Around 360 Degree Visibility
Single Piece Bucket Link cast for Extended Life Low Fuel Consumption & High Reliability Spacious HVAC Cabin with Audio System &
Wear Resistance HD Buckets Integrated 7 Inch Instrument Cluster

Simple Serviceability Intelligent Hydraulics

Ground Accessible Maintenance Points XEICS intelligent control system saves

Maintenance Free Air Pre Filter System additional Fuel & ensures Higher Productivity

ROPS / FOPS* Certified Cabin for Max Safety Globally acclaimed Hydraulics components – Higher life

*Available as Optional Feature

 SPECIFICATIONS XE215i-K LC
ENGINE OPERATOR CABIN
Model Cummins 6BT5.9 HVAC OPT
Type 6 Cylinder, 4 Stroke, Turbocharged Front Mesh Guard OPT
Displacement 5.9 L
Rated Power 141.4 hp @ 2000 rpm DIMENSION
Batteries 12 V x 2
BOOM 5.68 m
Max Torque 564 Nm @ 1600 rpm DIMENSION (unit : mm) ARM 2.4 m

HYDRAULIC SYSTEM A Overall Length 9582

B Overall Width 2800
Main Pumps 2 Variable Axle Piston Pumps
C Overall Height 3034
Max Flow 448 lpm
D Width of Platform 2710
Pilot Pump 3.9 MPa
E Length of Crawler/Track 4170
Swing Speed 13 rpm
G Track Shoe width 600
RELIEF VALVE SETTINGS H Wheelbase of crawler 3370
I Track Gauge 2200
Main Safety Valve Pressure 34.3/37 MPa J Counterweight clearance 1000
Swing System Pressure 28 MPa Minimum ground clearance 477
K
Travel System Pressure 34.3 MPa L Minimum tail swing radius 2728
Pilot System Pressure 3.9 MPa M 937
Track Height

UNDERCARRIAGE
Max Travel Speed 5.2 km/h WORKING RANGE
Max traction Force 184 kN BOOM 5.68 m
Working Range (unit: mm)
Gradeability 70 degrees ARM 2.4 m

No of Upper Roller/Side 2 A Max. digging height 9245

No of Lower Roller/Side 9 B Max. dumping height 6440
No of track Shoes/Side 49 C Max. digging depth 6197
Shoe width 600 mm D Max. depth cut (8 ft) Level bottom 5970
E Max. vertical wall digging depth 5575
SERVICE REFILL CAPACITIES F Max. digging radius 9440
G Min. swing radius 3515
Fuel Tank 360 L
Engine Coolant 23 L
Engine Oil 16 L WORKING RANGE
Travel device(Per side) 5L
Swing Device 5L
Hydraulic Tank 220 L
Hydraulic System 300 L

BUCKET SELECTION GUIDE

Capacity width weight Recommendation
mm Teeth mm
ISO heaped 2400mm 2900mm
1.0m (GP)3
1316 5 850
0.9m 3(GP) 1060 5 930
1.0m 3(HD) 1146 5 970
1.1m 3(EM) 1406 5 805
Suitable for Materials with density of 2000 kg/m or less
Suitable for Materials with density of 1600 kg/m or less
Suitable for Materials with density of 1100 kg/m or less
Not applicable

SCHWING Stetter (India) Private Limited Authorised Dealer :

F71/72 SIPCOT Industrial Estate, Irungattukottai,
XCMG/HEX/09/2022

Kanchipuram District - 602117, Tamil Nadu, India.

Mobile +91 9176606120, Landline +91 (44) 71378106
enquiry@schwingstetterindia.com
www.schwingstetterindia.com
CIN No. U45309TN1998PTC046270
The Specification are subjected to change without prior notice. The machine depicted may vary from the actual machine please contact our nearest office for latest specification. Accessories shown here are not part of the standard equipment
performace of the machine may vary with site and operation condition encountered 2.5% tolerance / variation on parameters may occur and is acceptable by the industry norms.