This document contains calculations for determining the amount of aggregate needed for a cement treated base course (CTBC) for a roadway project. It provides the formulas for calculating CTBC based on length, width, and depth of the area. The document then includes a table with columns for station, length, width, width 1, depth, and tons of aggregate needed, but all the values are listed as 0, indicating the calculations have not yet been performed. It concludes by noting that once all calculations are complete, the totals should be verified according to the specifications in the Roadway Design Manual.
This document contains calculations for determining the amount of aggregate needed for a cement treated base course (CTBC) for a roadway project. It provides the formulas for calculating CTBC based on length, width, and depth of the area. The document then includes a table with columns for station, length, width, width 1, depth, and tons of aggregate needed, but all the values are listed as 0, indicating the calculations have not yet been performed. It concludes by noting that once all calculations are complete, the totals should be verified according to the specifications in the Roadway Design Manual.
This document contains calculations for determining the amount of aggregate needed for a cement treated base course (CTBC) for a roadway project. It provides the formulas for calculating CTBC based on length, width, and depth of the area. The document then includes a table with columns for station, length, width, width 1, depth, and tons of aggregate needed, but all the values are listed as 0, indicating the calculations have not yet been performed. It concludes by noting that once all calculations are complete, the totals should be verified according to the specifications in the Roadway Design Manual.
This document contains calculations for determining the amount of aggregate needed for a cement treated base course (CTBC) for a roadway project. It provides the formulas for calculating CTBC based on length, width, and depth of the area. The document then includes a table with columns for station, length, width, width 1, depth, and tons of aggregate needed, but all the values are listed as 0, indicating the calculations have not yet been performed. It concludes by noting that once all calculations are complete, the totals should be verified according to the specifications in the Roadway Design Manual.
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 2
09/11/2023
PROJECT NO.: SHEET OF
COMPUTED BY: CHECKED BY: SECTION: 540
AGGREGATE FOR CEMENT TREATED
BASE COURSE
CALCULATE CTBC: CTBC =X 1.5(D) X 2700# / YD3 X ((W+W1)/2) = TONS 27 FT3 / YD3 x 2000# / TON
CALCULATE CTBC: CTBC =X 1.5(D) X 2700# / YD3 X ((W+W1))/2 = TONS 27 FT3 / YD3 x 2000# / TON
NOTE: WHEN ALL CALCULATIONS ARE COMPLETE AND TOTALED SEE THE ROADWAY DESIGN MANUAL, PART I, 11-1D. PROJECT NO.: SHEET OF COMPUTED BY: CHECKED BY: SECTION: 540
