Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Analisador de Transformador

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

www.wktech.

kr

WOO KWANG
TECH. CO., LTD

www.wktech.kr

WooKwang Tech. Co.,Ltd


A : 115, 14 Beon-gil, Hogupo-ro, Namdong-Gu, Incheon, Korea
T : 82-32-815-3741 F : 82-32-815-3746 E : wktech@wktech.kt

Innovative Technology
We are bringing the sole futuristic value,
opening the future of the renewable energy industry.
Philosophy,Vision,Policy Continuous Growth
Establishment of a base for continuous growth
We are going to promote management innovation and efficiency to cope with the management environment ofthe rapidly
changing world, and secure power for the future growth by excavating a project of creating a new value through exerting
creativity.

Social responsibility
A proud company contributing to and serving society. We are going to be an enterprise that realizes green IT and leads
corporate social responsibility as a company specializing in power IT using the creation of green energy and the harvesting
of energy.
Continuous
Growth Green Energy
An enterprise that specializing in power IT that creates Green energy via energy harvesting. WooKwang Tech CO., LTD will
be a foundation to realize a green IT world with a smart grid that manages energy as well as produces energy by blending
its capacity, accumulated in the power IT field of power industry so far, with an energy harvesting technology.

Challenging Mind
We are going to make a challenge in an indomitable spirit to activate R&D as an enterprise specializing in powerIT that
Challenging Social adapts to a new technical change and to raise a value inside the enterprise such as cost reduction,security of superiority in
Mind responsibility competitiveness, etc.

Green
Energy

History
1997.11 2001.05 2007.01 2007.07 2008.06 2009.06 2010.11
Establishment of Acquisition of ISO 9002 Extension of the factory Clean business place Establishment of a R&D Venture enterprise Certificate of INNO-BIZ
Wookwang Tech Co., Ltd. (Korean Standards Association) certificate (No.34637) Center of Woo Kwang certificate
2007.06 2011.11
(Namdong-ku, Incheon-city) Tech Co., Ltd. (No.20090202676)
2002.06 A certificate for excellent business 2007.11 Award of Vision Company
1999.04 Acquisition of KS (KSC 3117) owners employing the disabled Selectes as a technical 2009.07
Registration of the factory (No.2007-13) innovative small and Made a contract for a
2006.03
(No.99140164) medium business technical development
Acquisition of ISO 9001
(INNO-BIZ) support project for small
2006.11 and medium businesses
Acquisition of ISO 14001

Company Introduction WOOKWANG TECH.CO.,LTD. 2 3


DTMS Distribution Transformer Monitoring System

DTMS measures the status current,voltage,temperature,load ratio of the transformer


and send data to the server via a wireless network, a manager could be improved
the power quality by managing of data through the internet.

The concept of the system


• IWF : Inter-Working Function • FEP : Front End Processing •1 server = Including 10,000 terminal

FIELD NETWORK POWER COMPANY

Slave #1

1 Server
= 10,000 terminal

RF communication
Master Oracle DB

RF Server
communication

Slave #19
FEP

GSM / CDMA
RF communication

IWF

DTMS [Distribution Transformer Monitoring System] WOOKWANG TECH.CO.,LTD. 4 5


DTMS Distribution Transformer Monitoring System

Graphic indication
Product
The graph for indication trend curve according to the pole number
- Current, Voltage, Temperature, Load ratio

Sending Alarm message to manager


- Pop-up on computer, SMS on Cellular phone.

Features
- Real time measurement of current & voltage of transformer
- Indication of trend graph about current, voltage and load ratio
- Report measuring value at daily/monthly/quarterly/yearly&print out
- Alarm indication

Function
Monitoring Load history
- Able to be set measuring time(minute, hour) by user

Web main display Monitoring load history

DTMS [Distribution Transformer Monitoring System] WOOKWANG TECH.CO.,LTD. 6 7


DTMS Distribution Transformer Monitoring System

Report Technical Specification


Save as excel and print-out (Daily, Monthly, Quarterly, Yearly)
Description Specification

* Slave : Slave device + Probe + RF modem


Consist of one group * Master : Slave + GPRSM Modem
* 1 master + Maximum 19 Slave sets

Must be sent data to master through other slave if can not transmit
Data relay (Bypass)
Daily Report data due to obstacles or long distance between master and slaves
SMS Sending to PC and Cellular phone
Data memory Store up to 48hours data that measuring every 30 min.
Master
& Reset RF Modem and GSM Modem per 24hour
Slave Alarm Over-load, Power-outage, Imbalance, Over-heat
Monthly Roport
Display LCD with backlight
Water Proof IP53
Weight 1.4kg
Size 240(L) X 220(W) X 85(T)
Measurement Current and voltage at the same time
Load History Annual Roport
Wire length < 1.8M
Voltage range 0V ~ 300V
Probe
Benefits Current range 0A ~ 1,000A
Improvement in electric power quality
- Maintain standard voltage Size 35(inner dia.) X 90(W) X 105(L) X 40(T)
Energy saving Weight 1kg / 4ea
- Resolve phase imbalance Frequency range 424,000 ~ 424,950㎑
Increasing Transformer life cycle
Channel space 12.5㎑
- Prevent over-heat
Channel 21 channel
Prevent transformer explosion
- Measures temperature RF Oscillating method PLL(Phase Lock Loop)
Modem Transmit speed 1,200bps
Customer satisfaction
- Stable power supply Modulating method FLL(frequency Shift Keying)
- Shorten recovery time by SMS Error processor 16bit checksum coding
Com. Port RS232(9pin)
Maintenance of Transformer Power connector RJ11 6-way
Input voltage range 5 – 36V DC
GPRSM Nominal Voltage 12V DC
Modem
Power consumption 5V 0,0075mA / 12V 0,520mA / 24V 1,770mA / 32V 2,580mA
▶ Changing overload transformer Can be
changed USB connector max. voltage 30V, Low level 0 ~ 1V, High Level 4 ~ 30V, ESD protected
▶ Removing imbalanced load
▶ Alarm indication Omnidirectional GSM 850 / 900Mhz, GSM 1800 /
Antenna
1900Mhz Impedance 50Ω

DTMS [Distribution Transformer Monitoring System] WOOKWANG TECH.CO.,LTD. 8 9


PAD Power Acquisition Device

System Configuration Application case


PAD is device for supplying power sources to surveillance equipment (FRTU, RTU, etc) through This is CT probe which is get a power from high-voltage (22.9KV) and then be able to be
AC/DC converter by obtaining energy using non-contact method after connecting current
operated the device without connect with power from outside.
transformer probe on distribution line switchgear, a high-voltage underground lines.

▶Consist of : Acquisition Module 1ea + CT Probe (6ea) a

c
b

d It is able to be connected or disconnected power by


remote operating.
This is a picture of inside pad mounted transformer.

a. Device (RTU) b. Measuring CT c. A/D converter d. Power CT (Iron Core)


(Rogowski coil)

Power Acquisition Device Technical specification

Description Specification

High voltage power line User's system


Aquisition voltage DC 14 ~ DC 20V
Charging fuction Should be need
Input current 11A on power line DC14V / 500mA
Module
Maximum output DC14V X 1.2A = 16.8W
Size 180 X 120 X 65
Weight 0.6kg
Size 650(inn. dia.) X 130(ext. Dia.) X 125(H)
Probe
Weight 3.2kg
A.D Converter

Battery Effect
a. No need to install transformer
b. No need to lay power line from outside
c. Cost reduction

PAD [Power Acquisition Device] WOOKWANG TECH.CO.,LTD. 10 11


LF Line Finder

line finder is device for identifying which transformer’s 2nd outlet line is supplied Features
power to consumer if there is multiple transformer near consumer. - Identify correct power supply schematic between transformer and consumer
- Identify consumer’s using phase of transformers
- Budget-cutting

Product
System Diagram

TR2
TR3
TR1

Connector
Inlet Line Transformer
Master Slave
TR4

Connector
· Product Master · Slave

Low current distribution Line

Installation
Receiver (Master)

B N

A C

a. Connect A, B, C, N sensor to transformer power line.


· Signal generator b. Signal generator shall be connected to consumer power lines and the slave.
c. Signal generator and Slave turn a power on.
d. Push a sending button on slave in order to transmitting signal toward the Master
e. Confirm signal receiving through Master LCD

LF [Line Finder] WOOKWANG TECH.CO.,LTD. 12 13


LF Line Finder Clamp
Installation
Transmitter (Slave) Available Wire Breaking Test Pulling Load kN
Product No.
(㎟) (kgf) (kgf )

WDC-1 HDCC 38, 60 25.99(2,650) 14.22(1,450)

WDC-2 HDCC 100 43.34(4,420) 24.52(2,500)

WDA-1 ACSR 32, 58 21.57(2,200) 11.77(1,200)


Wedge-type Dead-end clamp for HDCC & ACSR
WDA-1 ACSR 95 36.67(3,740) 18.63(1,900)
A wedge-shaped tensile clamp for aluminum wires
used to fix cables to the distribution line WDA-3 ACSR 160 41.19(4,200) 34.32(3,500)
Status of current generator connected Slave and current generator
with the Slave connected to a switchboard Product No. Using Wire (㎟)

D-1 32~58

D-2 95
Dead-end clamp for Aluminum conductors D-3 160
Line Finder Technical specification A bolt-joining tensile clamp used at the built-in dead
end places of the overhead AL distribution cables D-4 240
Description Specification
Consist of * Acquisition Module 1ea + CT Probe 6ea + Modem Available Wire
Product No.
Outside diameter (㎟)
Power supply DC 14 ~ DC20V
AB-1 9.6
Charging output DC 12 ~ DC 14V
Raw material Aluminum A5052 Dead-end clamp for suspension wire of ABC AB-2 10.5
A tensile clamp for suspension cables used for a 22.9kV
Input current DC 20 V very high voltage overhead cable (ABC) AB-3 13
Maximum output 8W
Product No. Type Available Wire (㎟)
Master 225(L) X 100(W) X 75(T)
AS-1 50
Module Slave 190(L) X 105(W) X 45(T)
Size AS-2 95
Generator 225(L) X 200(W) X 95(T) Three-phase
AS-3 150
Probe 65(inner dia.) X 130(outside Dia.) X 125(T)
ABC suspension 1-1 AS-4 240
Master 1.65kg / ea A clamp to hold a neutral conductor of the cable
separately and support the cable load at the holding AS-5 50
Slave 0.4kg /ea part of the neutral conductor
Single-phase
Weight AS-6 95
Generator 2.2kg
Probe 6.5kg /16ea
Acquisition power Using CT probe on 25,8kV
Measuring range 1A ~ 12,000A Available Wire ranges : 50~240㎟
Probe Circumstance -25℃ ~ 70℃ ABC cable clamp
A clamp designed to hold cables and suspension
Display Character LCD(20X4) wires simultaneously to prevent suspension wires and
Size 650(inside dia.) X 110(external Dia.) X 120(H) cables from loosening

LF [Line Finder] / Clamp WOOKWANG TECH.CO.,LTD. 14 15

You might also like