Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 154 views

    Material Make & Specification Sheet

    Uploaded by

    Skill India
    This document provides specifications for materials used in refrigeration systems including: 1. Copper pipes of various sizes and tempers suitable for R410A refrigerant and tested to JIS H3300 standards with a clean inner surface. 2. Hard phosphorus copper brazing rod. 3. PVC drain pipes with a pressure rating of 10kg/sqcm. 4. Closed cell elastomeric foam pipe insulation from various manufacturers.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Material Make & Specification Sheet

    Uploaded by

    Skill India
    154 views1 page
    This document provides specifications for materials used in refrigeration systems including: 1. Copper pipes of various sizes and tempers suitable for R410A refrigerant and tested to JIS H3300 standards with a clean inner surface. 2. Hard phosphorus copper brazing rod. 3. PVC drain pipes with a pressure rating of 10kg/sqcm. 4. Closed cell elastomeric foam pipe insulation from various manufacturers.

    Original Description:

    Low side Material specification and make list of VRV/ VRF System

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for materials used in refrigeration systems including: 1. Copper pipes of various sizes and tempers suitable for R410A refrigerant and tested to JIS H3300 standards with a clean inner surface. 2. Hard phosphorus copper brazing rod. 3. PVC drain pipes with a pressure rating of 10kg/sqcm. 4. Closed cell elastomeric foam pipe insulation from various manufacturers.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    154 views1 page

    Material Make & Specification Sheet

    Uploaded by

    Skill India
    This document provides specifications for materials used in refrigeration systems including: 1. Copper pipes of various sizes and tempers suitable for R410A refrigerant and tested to JIS H3300 standards with a clean inner surface. 2. Hard phosphorus copper brazing rod. 3. PVC drain pipes with a pressure rating of 10kg/sqcm. 4. Closed cell elastomeric foam pipe insulation from various manufacturers.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 1

    MATERIAL SPECIFICATION SHEET

    S. Item Description Specification Make


    No.
    1. Copper Pipe: Size φ Temper Thick 1. Mandev Tubes
    Phosphoric acid (mm) (mm) 2. Global Copper (RR
    Deoxidized seamless 9.5 O 0.80 Shramik)
    copper pipe 12.7 O 0.80 3. Mehta Tubes (Mex
    1. Suitable for 15.9 O 1.00 Flow)
    R410 A 19.1 O 1.00
    refrigerant 19.1 ½H 0.80
    2. Tested as per 22.2 ½H 0.80
    JIS H3300 25.4 ½H 0.88
    3. Should have 28.6 ½H 1.00
    clean inner 31.8 ½H 1.10
    surface and 34.9 ½H 1.21
    38.1 ½H 1.32
    capped before
    41.3 ½H 1.43
    delivery
    2. Brazing Rod: Hard Harris
    Solder, Phosphorus
    Copper Solder
    3. Drain Pipe- PVC with 10 Pipe size as per flow rate 1. Finolex,
    kg/sqcm (142.23 PSI) 2. Supreme
    pressure rating. 3. Prince
    4. Other
    4. Insulation- Copper Pipe- As per OEM Recommendation 1. Armacell
    1. Closedcell Supply Ducts- 9 mm. (Armaflex, Accoflex),
    Elastomeric 2. Superlon
    Foam insulation 3. Aeroflex (Aerocell,
    basis Nitrile A-Flex)
    Rubber/ 4. K-flex
    Polyolifine 5. Supreme
    (Insuflex)
    6. Thermaflex
    (Thermapro Smart)
    5. Protection on Outdoor 1. Stainless Steel Covering;
    Piping 2. Galvanized tray with cover;

    6. Jet Nozzles
    7. Diffuser
    8. Grills

    You might also like