Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Ptfe - G400

    Uploaded by

    Alessio Di Bella
    34 views1 page
    This technical data sheet provides information about PTFE G400 properties including: 1) It has a density of 2.14-2.18 g/cm3, Shore D hardness of at least 51, and tensile strength of at least 24 N/mm2. 2) It can elongate at least 250% and has a compressive strength of 4-5 N/mm2. 3) It has an impact strength of 153 J/m and low coefficients of friction, wear, and thermal expansion. It can operate between -200°C and +260°C.

    Original Description:

    Original Title

    PTFE - G400 (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This technical data sheet provides information about PTFE G400 properties including: 1) It has a density of 2.14-2.18 g/cm3, Shore D hardness of at least 51, and tensile strength of at least 24 N/mm2. 2) It can elongate at least 250% and has a compressive strength of 4-5 N/mm2. 3) It has an impact strength of 153 J/m and low coefficients of friction, wear, and thermal expansion. It can operate between -200°C and +260°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    34 views1 page

    Ptfe - G400

    Uploaded by

    Alessio Di Bella
    This technical data sheet provides information about PTFE G400 properties including: 1) It has a density of 2.14-2.18 g/cm3, Shore D hardness of at least 51, and tensile strength of at least 24 N/mm2. 2) It can elongate at least 250% and has a compressive strength of 4-5 N/mm2. 3) It has an impact strength of 153 J/m and low coefficients of friction, wear, and thermal expansion. It can operate between -200°C and +260°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    TECHNICAL DATA SHEET

    PTFE G400

    Properties Unit Method Data - Moulded


    PHYSICAL - MECHANICAL
    Density g/cm3 ASTM D792 2,14 - 2,18

    Hardness - Shore D / ASTM D2240  51

    Tensile Strength - CD N/mm2 ISO 527  24


    v = 50mm/min microtensile die

    Elongation at break - CD % ISO 527  250


    v = 50mm/min microtensile die

    Compressive strength at 1% deformation - CD N/mm2 ASTM D695 4-5


    Deformation under load at room temperature after 24
    % ASTM D621 ≤ 17
    hours at 13,7 N/mm2 - CD
    Permanent deformation as above after 24 hours of rest at
    % ASTM D621 ≤9
    room temperature - CD
    Deformation under load at 260 °C after 24 hours at 41
    2 % ASTM D621 ≤ 32
    N/mm - CD
    Permanent deformation as above after 24 hours of rest at
    % ASTM D621 ≤ 19
    room temperature - CD

    Impact strength Izod J/m ASTM D256 153

    TRIBOLOGICAL
    ASTM D1894
    Dynamic coefficient of friction / 0,06
    ASTM D3702
    Wear factor K / ASTM D3702 2.900
    PV limit at 3 m/min 2,4
    at 30 m/min N/mm2  m/min / 4,2
    at 300 m/min 5,7
    THERMAL
    Service Temperature ( min - max ) °C / - 200 / + 260

    -5 Similar to ASTM
    Thermal expansion coefficient ( linear ) 25 - 100°C 10 (mm/mm)/ °C 12 - 13
    D696
    ELECTRICAL
    Dielectric strength (specimen 0,5 mm thick) KV/mm ASTM D149 ≥ 40

    Dielectric Constant at 60 Hz and 106 Hz / ASTM D150 2,05 - 2,10

    18
    Volume Resistivity Ω  cm ASTM D257 10
    17
    Surface Resistivity Ω ASTM D257 10
    CD=Cross Direction
    The data we are herewith providing are all based on laboratory testing and are proposed to technical designers as possible and useful advice.
    Deviations from the values hereabove indicated may occur, but they do not constitute themselves either detriment of quality or reason for rejection.
    REV. 06 April 2011

    You might also like