额定载重 Payload 76000kg

XDR80T 三桥刚性矿车
XDR80T TRI AXLE RIGID MINING TRUCK
空载车重 Empty Weight 34000kg
整车总质量 Gross Vehicle Weight (GVW) 110000kg
驱动形式 Axle configuration 6×4
最高车速 Max. vehicle speed 45Km/h
最大爬坡度 Max.gradeability 30%
最小转弯直径 Min. turning diameter 22m

2:1堆装（Heaped SAE 2:1） 35~53m3

9308×4578×4345mm

A:4578 B:3700 C:2022

YC6K480-GT30
D:2984 E:3950
353kW/1900rpm
2200Nm/1100～1500rpm

法士特FAST8DS240A
主减速比Differential Ratio 4.625
轮边速比Planetary Reduction 3.478
总速比Total Reduction Ratio 16.086

F:4020 G:440 H:3094

气压盘式制动Pneumatic Disc Brake

悬架系统 Suspension

类型 Type 三桥全油气悬架系统 Hydraulic full suspension on all wheels

前悬架 Front Suspension 麦弗逊独立前悬架 McPherson, Hydro-pneumatic suspension
后悬架 Rear Suspension 油气平衡悬架 Hydro-Pneumatic Balanced Suspension
I:4345 J:1699 K:514

L:1766 M:3800 N:1750

全液压转向系统，具备应急转向功能 O:9308 P:534 Q:3518

Full Hydraulic Steering System，Emergency steering automatically applied by accumulator R:8809

徐州徐工矿业机械有限公司
XUZHOU XCMG MINING MACHINERY CO.,LTD

WWW.XCMG.COM 额定载重 Payload (kg)： 76000

地址：江苏省徐州市和平大道169号 额定功率 Rated Power (kW/rpm)： 353/1900
邮编：221000
全国统一客服热线：400-110-9999 0516-83113333
最大爬坡度 Max Gradeability (%)：30
Address: No. 169, Heping Avenue, Xuzhou City, Jiangsu Province,R,P,CHINA

Postal Code: 221000

Hot Line: 400-110-9999 0516-83113333

 XDR80T TRI AXLE RIGID MINING TRUCK XDR80T三桥刚性矿车

高生产率 舒适安全
HIGH PRODUCTIVITY COMFORTABLE AND SAFE

高性能发动机 舒适的座椅
High Performance Engine Comfortable seat
高靠背座椅减震舒适，配备副驾驶席。
XDR80T搭载玉柴480马力电控柴油发动机。燃油经济性
The high back seat has shock absorption function and is very comfortable.
好，动力充沛；发动机监控系统可实时监控各气缸的工作状
It is equipped with a co-pilot seat.
况，延长发动机使用寿命，降低使用成本；先进的全电控系
统，保障发动机在不同海拔高度和负载条件下的最佳性能。

XDR80T is equipped with Yuchai 480 HP electronically controlled diesel engine, which has good fuel economy and
abundant power; the engine monitoring system can monitor the working conditions of each cylinder in real time,
prolong the service life of the engine and reduce the cost; the advanced fully electronic control system ensures the
best performance of the engine under different sea level and load conditions.
内饰配备齐全
The interior is fully equipped
各种显示仪表、报警器、照明、控制开关、收音机、车载电脑、可倾斜伸
缩式方向盘、电动风挡雨刷及清洗器、冷暖空调等配备齐全。
All kinds of display instruments, alarms, lighting, control switches, radios,
on-board computers, tiltable and retractable steering wheels, electric
windshield wiper and washer, heating and cooling air-conditioning, etc.
are fully equipped.

可靠的制动系统
Reliable braking system

XDR80T三桥刚性矿车有以下制动模式：
行驻一体气盘式制动：整车制动系统采用钳盘式结构，制动稳定性好。
辅助制动：发动机缸内制动，变速箱缓行。

XDR80T tri axle rigid mining truck has the following braking modes:

全景倒车辅助视频系统
Integrated air disc brake: the brake system of the whole vehicle adopts caliper disc
structure, which has good braking stability.
Auxiliary brake: Engine brake. Hydraulic retarder. Panoramic reversing auxiliary video system
实时获取周边视频影像，保证行车安全。
Real-time access to surrounding video images to ensure driving safety.
 XDR80T TRI AXLE RIGID MINING TRUCK XDR80T三桥刚性矿车

行驶平稳 货厢
Body
SMIITH AND STEADY 货厢底板、侧板选用高强度耐磨钢，使用寿命长，轻量化设计，可为用户创造更大价值；货厢底面为平板结构，有利于增加结
构可靠性；底板与侧板过渡处采用三角板加固的形式，卸载不易粘料；车架内侧配备举升安全杆，为车辆检修人员提供检修空
间以及安全保障。
The bottom plate and side plate of the body are made of high-strength
车架 wear-resistant steel with long service life and lightweight design,
Frame which can create greater value for users; the bottom surface of the
freight body is of flat structure, which is conducive to increase the
车架由平行左右纵梁和横梁组成，横梁与纵梁一起构成封闭结构；纵梁为箱型截面结构，横梁为抗扭管
structural reliability; the transition between the bottom plate and the
形式，可以消除弯曲和开裂应力集中源；车架采用优质低合金高强度钢制造，提高车架的强度；重要焊 side plate is reinforced by triangular plate, so that the material can be
缝100%经超声波探伤。可拆卸式的上龙门梁，方便发动机的吊装。采用计算机辅助设计，并进行有限 easily unloaded; the inside of the frame is equipped with lifting safety
元优化分析。 bar, which can provide maintenance space and safety guarantee for
vehicle maintenance personnel.
The frame is composed of parallel left and right longitudinal beams and cross beams. The cross beams
and the longitudinal beam together form a closed structure; The longitudinal beam is of box section
structure, and the cross beam is in the form of anti-torsion tubes, which can eliminate the stress con-
centration source of bending and cracking; the frame is made of high-quality low-alloy high-strength
steel to improve the strength of the frame; Important welds are 100% inspected by ultrasonic. The
detachable upper gantry beam is convenient for lifting of the engine. Computer aided design and finite
element optimization analysis are used.

悬架系统
Suspension
XDR80T矿用自卸车前悬架采用麦弗逊独立悬架，左右对称，保证车轮定位可靠，行驶稳定、舒适；油气
悬架通过关节轴承与车架和前后车桥相铰接，活塞杆外露部分由可伸缩护套保护；能够适应承载和路面状
况的变化，快速吸收冲击，衰减振动，保证行驶平顺。
The front suspension of XDR80T mining dump truck adopts McPherson independent suspension, which
is symmetrical to the left and right to ensure reliable wheel positioning, smooth and comfortable driving;
the hydro-pneumatic suspension is hinged with the frame and front and rear axles through the joint bear-
ing, and the exposed part of the rod is protected by the retractable sheath; it can adapt to the changes of
load and road conditions, quickly absorb the impact, reduce vibration, and ensure smooth driving.

前悬架:麦弗逊独立悬架，油气悬架缸。
Front suspension: McPherson independent suspension, hydro-pneumatic sus-
pension cylinder.

后悬架:四连杆和横向稳定杆结构，油气悬架缸，并在中后桥采用双气室储能器，
车辆空满载时偏频变化小，保证驾乘舒适性。
Rear suspension: four-bar linkage and lateral stabilizer bar structure,
hydro-pneumatic suspension cylinder, and double chamber accumulator in the
middle and rear axle. The frequency deviation changes little when the vehicle is
empty and full, so as to ensure the driving comfort.
 XDR80T TRI AXLE RIGID MINING TRUCK XDR80T三桥刚性矿车

照明系统
Lighting system
照明系统全部为LED灯，由前大灯、转
向灯、轮廓灯、停车灯、倒车灯、维修
灯等组成；照明与警示灯的位置合理，
满足各种天气环境下作业时的照明与警
示要求；控制和工作电压为DC 24V。
All lighting systems are LED lamps, which are composed of headlamp, turn signal, contour lamp, parking lamp, reversing
lamp, maintenance lamp, etc.; the location of lighting and warning lights is reasonable, which can meet the lighting and warn-
ing requirements in various weather conditions; the control and working voltage is DC 24V.

转向
Steering
全液压动力转向，转向平稳、响应精度高；配备应急转向功能，由蓄能器提供动力，保证行车安全；断
开式转向梯形，大转角时更符合阿克曼几何关系，减少轮胎磨损。
Full hydraulic power steering, stable steering 自动润滑系统
and high response accuracy; equipped with
emergency steering function, powered by accu-
Automatic lubrication system
mulator to ensure driving safety; disconnected 自动润滑系统定期润滑各部件，减少保养时间，降低维修成本。
steering trapezoid, more in line with Ackerman The automatic lubrication system can regularly lubricate all parts, reduce maintenance time and
steering geometry at large turning angles, maintenance cost.
which can reduce tire wear.

安全装置
轮胎 Safety device
Tires 驾驶室配备三点式座椅安全带、逃生锤、急停开关，整车配备倒
选用16.00R25子午线的工程轮胎，保证足够的地面附着能力， 车影像系统、紧急信号灯、倒车警告、防滑行走表面、护栏等。
使整机获得足够的牵引力，提高了车辆的通过性。 The cab is equipped with three-point seat belt, emergency
The 16.00R25 radial engineering tire is selected to ensure hammer and emergency stop switch. The vehicle is equipped
enough ground adhesion capacity, make the whole machine with reversing image system, emergency signal light, reversing
obtain enough traction force and improve the trafficability of the warning, anti-skid walking surface, guardrail, etc.
vehicle.
配备大直径轮胎，整车离地间隙大，通过性好；轮胎无超载， 随机备件及工具
使用寿命长。
Equipped with large diameter tires, the vehicle ground clear-
Spare parts and tools
ance is large, good trafficability; no overloading, long service 配备一套随机工具和易损件。
life. Equipped with a set of tools and wearing parts.