1 2 3 4 5 6 7 8

NOTES:
1- ALL VALVES ARE 100% FACTORY TESTED. 15,5
A A
2- ALL DIMENSIONS ARE FOR REFERENCE ONLY. 12,7
3- ASCO ORDER PART NUMBER: X202551812001F1.

B B
SCALE 1:1

45
INLET
LABEL DETAIL (PORT 1)

CUSTOMER APPROVED DRAWING

APPROVED BY COMPANY STAMP

17,1

7,14
Bionet

10,32
DATE

6,86
C C
SIGNATURE
OUTLET

3,18
2X 4,5 17,5 7,92 (PORT 2)
DIN912-A2 M3 X 18
SCREW 12,7
500 # 5 LONG
LEAD WIRE
NOT TO SCALE
Product Specifications
D Function 2/2-Way Normally Closed Proportional Valve PRELIMINARY, FOR REFERENCE D
Media Air, Inert gasesfiltered @ 25 µm OR QUOTATION PURPOSES ONLY.
Orifice Diameter DN 1 mm
DO NOT MANUFACTURE.
Max Operating Pressure (MOP) 6 bar [87 psi]
Min Operating Pressure 0 bar [0 psi]
Internal Leak (1 -2) < 0.5 ml/min @ MOP
External Leak < 0.5 ml/min @ MOP X 202551812001F1 INITIAL RELEASE
- TBB EICP MV 2021-06-23
Flow Rate ~ 11.5 l/min @ 3.4 bar [50 psi]
PART NUMBER ECN NR BY LOCATION APP. DATE
E Typical Voltage 24 VDC # 10% E
20220N PROPORTIONAL VALVE 20220N PROPORTIONALVENTIL
Operating Current Max. 110 mA
PWM > 1000 Hz
NC; DN 1,0; 24 VDC NC; NW 1,0; 24 VDC
Resistance 230.4 ^ # 5% @ 20 $ C
PROPERTY OF ASCO NUMATICS GMBH
ASSEMBLY
Power Level at Typical Voltage Max 2.5 Watt @ 20 $ C
A SUBSIDIARY OF EMERSON ELECTRIC CO.
USE PERMITTED FOR OUR WORK ONLY.
Creo mm REFERENCE
-
ALL RIGHTS OF DESIGN OR INVENTION
2 DIMENSION PROJECT
Coil Duty Continuous FIRST ANGLE
ARE RESERVED. THIS DRAWING IS NOT
TO BE COPIED OR USED WITHOUT THE
DRAWING TAKES PRECEDENCE
OVER 3D MODEL GEOMETRY UNITS NUMBER
CSR-003417
APPROVAL OF ASCO NUMATICS GMBH

Coil Insulation Class Class F (155 $ C [311 $ F]) APPR. BY DATE

Design A3 2:1 AGZ 1/1
Electrical Connection Lead Wires 24 AWG, 500 mm long AND DRAWN TBB 2021-06-15
1 STATE SIZE SCALE DOCUMENT TYPE SHEET
F Electrical Enclosure Protection IP50 CHECK NSM 2021-06-15
F
Operating Temperature 0 $ C to 55 $ C [32 $ F to 131 $ F] UNLESS OTHERWISE SPECIFIED:
DIMENSIONING AND TOLERANCING DIVISION
ENG. MK 2021-06-15 551812CS AA
ÖLBRONN-DÜRRN, GERMANY
Wetted Materials Brass, FKM, Stainless Steel PER ISO 2768-mK MGR. MV 2021-06-15 DRAWING NUMBER REVISION

1 2 3 4 5 6 7 8