Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    LR22550383TA MergedAppendix

    Uploaded by

    Mohamed MOUCHRIF
    This certificate certifies that a residual current circuit breaker with overcurrent protection manufactured by ABB SpA has been tested and approved by Lloyd's Register for marine, offshore, and industrial applications. The circuit breaker is rated for voltages up to 230V AC, currents from 6 to 40 amps, can detect residual currents from 10 to 300mA, and has short circuit ratings up to 10,000A. It has been tested down to an ambient temperature of -25°C and is suitable for environments classified as category ENV5 when installed inside an enclosure with an IP rating of at least 56.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LR22550383TA MergedAppendix

    Uploaded by

    Mohamed MOUCHRIF
    15 views3 pages
    This certificate certifies that a residual current circuit breaker with overcurrent protection manufactured by ABB SpA has been tested and approved by Lloyd's Register for marine, offshore, and industrial applications. The circuit breaker is rated for voltages up to 230V AC, currents from 6 to 40 amps, can detect residual currents from 10 to 300mA, and has short circuit ratings up to 10,000A. It has been tested down to an ambient temperature of -25°C and is suitable for environments classified as category ENV5 when installed inside an enclosure with an IP rating of at least 56.

    Original Title

    LR22550383TA_MergedAppendix

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This certificate certifies that a residual current circuit breaker with overcurrent protection manufactured by ABB SpA has been tested and approved by Lloyd's Register for marine, offshore, and industrial applications. The circuit breaker is rated for voltages up to 230V AC, currents from 6 to 40 amps, can detect residual currents from 10 to 300mA, and has short circuit ratings up to 10,000A. It has been tested down to an ambient temperature of -25°C and is suitable for environments classified as category ENV5 when installed inside an enclosure with an IP rating of at least 56.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views3 pages

    LR22550383TA MergedAppendix

    Uploaded by

    Mohamed MOUCHRIF
    This certificate certifies that a residual current circuit breaker with overcurrent protection manufactured by ABB SpA has been tested and approved by Lloyd's Register for marine, offshore, and industrial applications. The circuit breaker is rated for voltages up to 230V AC, currents from 6 to 40 amps, can detect residual currents from 10 to 300mA, and has short circuit ratings up to 10,000A. It has been tested down to an ambient temperature of -25°C and is suitable for environments classified as category ENV5 when installed inside an enclosure with an IP rating of at least 56.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Page 1 of 2

    Certificate No: LR22550383TA


    Issue Date: 05/06/2023
    Expiry Date: 04/06/2028

    Type Approval Certificate

    This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with
    the relevant requirements of the Lloyd's Register Type Approval System.

    Manufacturer ABB SpA


    Address Via Vittor Pisani, 16, Milano, MI, 20124, Italy

    Place of Production ABB Industrial Solutions (Klodzko) Sp. z o.o.

    Ul. Pilsudskiego 5, Klodzko, 57-300, Poland

    Type Circuit Breakers (Env Tested)

    Description Residual Current Circuit Breaker with Overcurrent Protection

    Trade Name DS202CR

    Application Marine/Offshore/Industrial applications in environmental categories ENV1,


    ENV2, ENV3 and ENV4 as detailed in Lloyd's Register Type Approval System -
    Test Specification Number 1, December 2021.

    Specified Standard IEC 61009-1:2010+A1:2012+A2:2013;


    IEC 61009-2-1:1991.

    Ratings See Appendix.

    Additional Tests The circuit breakers have been tested against low temperature to -25 °C, and
    are suitable for the environmental category ENV5 if installed in an enclosure
    which is separately tested against salt mist and degrees of protection provided
    (minimum IP56).

    Matteo Roiaz
    Electrotechnical Systems Specialist to Lloyd's
    71 Fenchurch Street, London, EC3M 4BS, United Register EMEA
    Kingdom A member of the Lloyd's Register group

    Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
    referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
    expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
    relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
    and conditions set out in that contract.

    TA01 2.0
    Page 2 of 2
    Certificate No: LR22550383TA
    Issue Date: 05/06/2023
    Expiry Date: 04/06/2028

    Type Approval Certificate

    This certificate is not valid for equipment, the design, ratings or operating parameters of which have been varied
    from the specimen tested. The manufacturer should notify Lloyd's Register EMEA of any modification or changes to
    the equipment in order to obtain a valid Certificate.

    The Design Appraisal Document LR22550383DA and its supplementary Type Approval Terms and Conditions form
    part of this Certificate.

    71 Fenchurch Street, London, EC3M 4BS, United


    Kingdom

    Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
    referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
    expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
    relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
    and conditions set out in that contract.

    TA01 2.0
    APPENDIX to Certificate no. LR22550383TA

    Ratings:

    number of poles : 2P
    rated voltage (Un) : 110 V / 230 V
    nature of supply : AC
    rated frequency : 50 Hz and 50/60 Hz
    rated current (In) : 6 up to 40 A
    range of instantaneous tripping overcurrent (curve) : B, C
    rated residual current (Idn) : 10 up to 300 mA
    residual current type : A
    rated residual marking and breaking capacity (Idm) : 3000 A according EN 61009-1
    1500 A according IEC 61009-1
    rated short-circuit current (Icn) : 4500 A / 6000 A / 10000 A
    energy limiting class : 3
    safety distance ‘a’ : 60 mm for types rated Icn=10000 A, In=40 A
    35 mm for all other types
    method of operation : independent of the line
    method of mounting : distribution board
    terminals : screw terminal
    rated ambient temperature (ta) : -25 °C to +40 °C
    protection against electric shock : IP 20

    Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually
    and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to
    any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever
    provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information
    or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

    You might also like