ABB O Drives
ABB O Drives
ABB O Drives
This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with
the relevant requirements of the Lloyd's Register Type Approval System.
Manufacturer ABB OY
Address Hiomotie 13, Helsinki, 00381, Finland
Matthias Karg
Specialist to Lloyd's Register EMEA
71 Fenchurch Street, London, EC3M 4BS, United A member of the Lloyd's Register group
Kingdom
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
and conditions set out in that contract.
TA01 2.0
Page 2 of 2
Certificate No: LR2002709TA-02
Issue Date: 24/10/2022
Expiry Date: 04/11/2024
Other Conditions For systems consisting of the listed components the final functional
arrangement and application software are to comply with appropriate Lloyd's
Register Rules and Regulations and shall be subject to project related Plan
Approval Process, when installed on LR classed vessels. Documents and
drawings for the actual application are to be provided according relevant LR
Rules and Regulations.
Type Approval does not eliminate the need for normal inspection and survey
procedures required by the Rules and Regulations.
If the specified standards are amended during the validity of this certificate,
the product is to be re-approved prior to it being supplied to vessels to which
the amended standards apply.
This certificate is not valid for equipment, the design, ratings or operating parameters of which have been varied
from the specimen tested. The manufacturer should notify Lloyd's Register EMEA of any modification or changes to
the equipment in order to obtain a valid Certificate.
The Design Appraisal Document HPC1762196-22/MK and its supplementary Type Approval Terms and Conditions
form part of this Certificate.
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or
expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms
and conditions set out in that contract.
TA01 2.0
Page 1 of 1
Certificate No: LR2002709TA-02
Issue Date: 24/10/2022
Expiry Date: 04/11/2024
Appendix
DESCRIPTION Industrial Single Drive ACS880-01-XxxXA-Y + ZzzZ
consisting of the following types:
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively,
referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage
or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract
with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively
on the terms and conditions set out in that contract.