214 Subfinal

Subfinal
1. If no direction for a bolt to be installed is specified
They should be installed with bolt head up or forward
2. which valve on aircraft pressurization can be controlled automatically as well as

manually?
Outflow valve
3. The following are purposes of the fuselage except
Generate lift
4. Envelope bagging is a process in which
the part to be repaired is completely enclosed in a vacuum bag
5. Which of the following composite material has white color appearance?
fiber glass
6. Which of the following is not the purpose of hydraulic reservoirs?
The reservoir absorbs pressure surges
7. Which one of the following is lifted by buoyancy principle

a. Glider
b. Airship
c. Aircraft
8. The first step in wing disassembly
Observe Safety procedure
9. Which one of the following needs additional support?
Semi-cantilever wing
10.Dry pump use
carbon type
11. which one of the following is true about Fly by wire control system when it is
compared to mechanical flight control system?
It has less weight
12. If the Rudder pedals didn't hold their neutral position when rudder Is
Streamlined, what should be the corrective action need to be taken?
Re-rig rudder cable
13. The stall protection system performs the following functions except
operation of spoilers
14. which of the following units align the nose gear before retraction?
Centering Cam
15. If the landing wheel converge on the longitudinal axis when it roll. It is referred as
tow-in
16. during approch for landing Hydraulic pressure is initially fed to
The landing gear door actuator
17. In aircraft oxygen system the color of the discharge indicator is;
Green
18. Which of the following emergency equipment is installed on the lower inboard face of
each entry and service door?
Slide raft
19. the center of gravity of an aircraft, when the aircraft contains only the items
specified in the aircraft empty weight?
Empty-weight center of gravity (EWCG)
20. Longitudinal stability is maintained by ensuring?
The CG is slightly ahead of the center of lift
21. Which is correct condition for weighing aircraft?
In side the hangar
22. _Pressure checking the fuselage for air leakage is called a cabin pressure
Dynamic Pressure Test
23. ____is used to form circular shape of a fuselage
Mating jig
24. Satisfactory glue joints in aircraft should develop
The full strength of the wood under all conditions of stress
25. Which of the following is correct about pressure on joint during joing by glue?
Apply even force to the joint
26. ____Is indicated by rupture across the wood fibers
Compression failure
27. The limit of grain inclination for spruce in grade A is
1:15
28. The last two numbers of the 1xxx group indicate
The hundredths of 1% above the 99% of pure aluminum
30. Tool used for bending operations that require the forming of thicker skins and more
complex parts:
Press brake
31. Which or the following can be used to make curved cut?
Throatless shear
32. Which of the following is not correct about replacement rivet?
Rivet with less Strength cannot be used in any condition
33. Not correct about composite material
Cannot be damage by sonic vibration
34. The degree of filtration of a cuno filter is determined by the thickness of the
_______.
A. Discs
B. Spacer
C. Filter element
35. Which of the following is the consequence of too much torque in a pneumatic system?
Damage to metals and seals
36. Which unit is used to prevent the extrusion of "o" rings due to high pressure
Backup Rings
37. Allows more forceful application of the brakes without nosing over
when braking, which enables higher landing speeds?
Tricycle Landing Gear
38. replaces the flammable gas space above the fuel tank (ullage) with a
non-flammable atmosphere?
Fuel Tank Inerting
39. Which is true about Boost pump is
Auxiliary pump
40. Fuel identification
Color, performance number & octane number
41. is a condition in which AVGAS vaporizes in the fuel line or other

components between the fuel tank and the carburetor?
Vapor lock
42. Draining
43. The temperature in the a/c cabin should be maintained in the range of
70-80°F
44. Insulation blanket in installed
Between linings and fuselage skin
45. In aircraft oxygen system the color of the discharge indicator is;
Green
46. Fiber glass color
White
47. R12 at room temperature, how is store in liquid state in bottle
High pressure
48. Which is normally used to purge oxygen system?
Oxygen
49. Not a requirement of fuel tank reservoir
Must be remove and installation
50. which one is true about wind shield heating
Resistive electricity passes through

214 Subfinal

Uploaded by

Copyright:

Available Formats

214 Subfinal

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

214 Subfinal

Uploaded by

Copyright:

Available Formats

Subfinal

1. If no direction for a bolt to be installed is specified

They should be installed with bolt head up or forward

2. which valve on aircraft pressurization can be controlled automatically as well as

3. The following are purposes of the fuselage except

4. Envelope bagging is a process in which

the part to be repaired is completely enclosed in a vacuum bag

5. Which of the following composite material has white color appearance?

6. Which of the following is not the purpose of hydraulic reservoirs?

The reservoir absorbs pressure surges

7. Which one of the following is lifted by buoyancy principle

41. is a condition in which AVGAS vaporizes in the fuel line or other

You might also like