Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 880 views

    Kriwan Ops 1 Oil Pressure Sensor

    Uploaded by

    alasad4ever
    - The OPS1 is an oil pressure differential switch that monitors the pressure difference between the suction and discharge ports of a refrigeration compressor's oil pump. - It has fixed cut-in and cut-out pressures of 0.95 bar and 0.63 bar respectively, with a time delay of 120 seconds. - When pressure drops below the cut-out value, the switch opens its output contact to shut off the compressor via its motor contactor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Kriwan Ops 1 Oil Pressure Sensor

    Uploaded by

    alasad4ever
    880 views1 page
    - The OPS1 is an oil pressure differential switch that monitors the pressure difference between the suction and discharge ports of a refrigeration compressor's oil pump. - It has fixed cut-in and cut-out pressures of 0.95 bar and 0.63 bar respectively, with a time delay of 120 seconds. - When pressure drops below the cut-out value, the switch opens its output contact to shut off the compressor via its motor contactor.

    Original Title

    KRIWAN OPS 1 OIL PRESSURE SENSOR

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    - The OPS1 is an oil pressure differential switch that monitors the pressure difference between the suction and discharge ports of a refrigeration compressor's oil pump. - It has fixed cut-in and cut-out pressures of 0.95 bar and 0.63 bar respectively, with a time delay of 120 seconds. - When pressure drops below the cut-out value, the switch opens its output contact to shut off the compressor via its motor contactor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    880 views1 page

    Kriwan Ops 1 Oil Pressure Sensor

    Uploaded by

    alasad4ever
    - The OPS1 is an oil pressure differential switch that monitors the pressure difference between the suction and discharge ports of a refrigeration compressor's oil pump. - It has fixed cut-in and cut-out pressures of 0.95 bar and 0.63 bar respectively, with a time delay of 120 seconds. - When pressure drops below the cut-out value, the switch opens its output contact to shut off the compressor via its motor contactor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Oil Pressure Differential Switch OPS1

    Technical data:
    Supply voltage AC 50/60 Hz 230V +/− 10% 10VA
    Ambient temperature range -30…..+60°C
    Time delay 120 s
    Cut-in pressure (fixed) 0,95 bar +/- 0,15 bar
    Cut-out pressure (fixed) 0,63 bar +/- 0,15 bar
    Switching capacity AC 250 V, max. 2,5A, 720 VA ind.
    Refrigerant compatibility yes (brass)

    Protection class according EN 60529 IP54


    Reset manual
    Connection cable 2
    4xAWG20 (0,5 mm ), L=1m colour
    coded cores

    Application: Weight ca. 200 g


    Monitoring the oil differential pressures in refrigeration
    compressors. The pressure sensor of the oil differential Installation Advice:
    switch is directly screwed into the pump housing of the
    compressor. Internal channels link the switch to the suction 1. Evacuate the compressor and close the shut-off valves.
    and discharge ports of the oil pump. No capillary connections Follow the correct codes of practice for refrigeration sys-
    are necessary. The electronic switch can be fitted or removed tems.
    without opening the refrigeration circuit.
    2. Remove the blind plug from the oil pump housing, clean
    Functional description: the thread.
    The differential pressure monitor is activated when the supply
    voltage is applied via an auxiliary contact of the motor 3. Screw the OPS1 screw-unit with O-ring and Cu- washer
    contactor K1. A red LED signals insufficient differential oil very carefully into the pump housing (Caution! O-ring!).
    pressure immediately. Once the pre-set value has been Tightening torque appr. 75 Nm.
    reached, the LED is extinguished. The output contact remains
    closed when the set value is reached/ exceeded. If the oil 4. Screw the OPS1 electronic-unit into the cleaned blind hole
    differential pressure remains or drops below the set value for and tighten by hand (appr. 10 Nm). Pay attention to the di-
    longer than the time delay time, the output contact opens and rection of the electrical leads.
    locks out mechanically. Depressing the reset button can
    reactivate the switch. Shorter periods of insufficient differen- 5. Make the electrical connections according to wiring dia-
    tial pressure are also recognised by the internal microproces- gram.
    sor circuitry and lead to a trip and lockout after correspond-
    ingly extended delay time. (integration). 6. Evacuate the compressor again to extract the air from it,
    open the service valves after proper evacuation and check
    the oil pressure switch connection for tightness.

    Commissioning:

    1. Switch on the compressor and wait until the achieved stable


    operating conditions have been obtained.

    2. If insufficient oil differential pressure is built up during start


    up, or during operation and, after the time delay expires, the
    output contact switches off and mechanically locks out. The
    power supply to the contactor coil is interrupted and the com-
    pressor is switched off.

    3. Restart is possible after approximately 3 minutes allowing


    cool down and manual reset.

    Wiring diagram
    Subject to technical modifications without notice!
    ATrained electrical personnel must connect the unit. All
    valid standards for connecting electrical and refrigeration
    equipment must be observed. Limit values for the supply
    voltage of the unit may not be exceeded. The oil differential 0700-30000XX
    switch needs no maintenance.

    You might also like