ME Induction Course Brochure 2023

Induction Course
for new M&E Engineers
25 – 27 September 2023
Hotel Armada Petaling Jaya

Lot 6, Lorong Utara C, Section 52
46200 Petaling Jaya
Organised by
The Association of Consulting Engineers Malaysia
REGISTRATION
Please click the link or scan QR code for ONLINE

REGISTRATION
https://kliksini.my/CGYCi
Objective
1. Introduce Professional M&E Consulting Engineering service to new M&E
Engineers.
2. A brief run through of M&E design engineering practice.
3. To prepare course participants for further training in specific M&E engineering
practice.
Target Audience
Mechanical or Electrical Engineers without formal training in Consulting Engineering
practice, and Engineers in consulting engineering firms with up to 2 years’ experience.
Language / Course Notes

English will be used for the course and course materials. Participants will receive the
course notes in electronic format.
Registration Fee
ACEM member firms RM 900.00 per person
Others RM 1,000.00 per person
Registration is on a first-come, first-served basis and will close upon reaching the
maximum number. Fee must be settled in full before commencement of course.
Fee will not be refunded for any cancellation. However, substitution of participants can
be arranged by informing the ACEM secretariat one week before the course
commences.
Closing date for registration is 18 September 2023.
Continuing Professional Development
The course is eligible for 15 CPD hours for Registered Persons with the Board of
Engineers Malaysia.
Certificate of Attendance
E-certificate of attendance will be issued to participants, subject to full attendance.
Enquiries
For further enquiries, please contact the ACEM secretariat at tel. no. 012-5290031 or
e-mail vivien@acem.com.my.
Course Contents
I. Professional Practice
1. Laws and Regulations Governing the Engineering Profession
1.1 The Registration of Engineers Act & Registration of Engineers Regulations.
1.2 Overview of Laws having relevance to the practice of Engineering (‘Local
Council Act’, ‘Town Planning Act’, ‘Roads, Drainage & Building Act’, UBBL,
‘Fire Services Act’ etc) (list and brief description of function only).
1.3 Overview of manuals and technical standards mandatory under statutory
requirements (list and brief description only).
1.4 Route to registration as P.Eng.
2. Concept of Professionalism and Engineer’s Responsibility towards Society & the

Public
2.1 Four key concepts in Professionalism (public interest, fiduciary interest,
professional conduct, expert knowledge).
2.2 Code of professional conduct.
2.3 The regulated profession and the unregulated profession.
2.4 Introduction to Civil Law Act, basic principles of torts, duty of care required of
a professional, ‘good samaritan syndrome’, fit-for-purpose etc.
2.5 Common issues of Professional Conduct (letter of release, taking-over and
supplanting, conflict of interest, etc).
II. Electrical High Voltage & Low Voltage Installations

1. Rules and Regulations Governing Electrical Engineering Practice
1.1 Energy Commission
1.2 TNB requirements
1.3 Bomba requirements
1.4 Department of Environment
1.5 Others
2. Electricity Supply Planning

2.1 Load estimates
2.2 Determination of supply voltage, metering scheme and project phasing
2.3 Requirements for essential and emergency power supply
2.4 Space planning
2.5 Cable routes planning
3. Considerations for High Voltage Supply Scheme Design

3.1 Effects of electromagnetic fields in high voltage design
3.2 Fault level current
3.3 Basic insulation scheme
3.4 Types of switchgears, transformers and cables
3.5 Supply security issues
3.6 Overhead lines versus Underground cabling issues
4. Considerations for Low Voltage Supply Scheme Design
4.1 Main switchboards
4.2 Distribution boards
4.3 Voltage drop considerations for distribution scheme
4.4 Diesel generator standby sets
4.5 Motor circuits
4.6 Lighting design
4.7 Voltage/Current surges protection
4.8 Harmonics currents
5. Protection Schemes and Testing

5.1 Protection rationales
5.2 Testing rationales
6. Lightning Protection Scheme and Earthing System
III. Air Conditioning and Mechanical Ventilation System

1. Rules and Regulations Governing Air Conditioning and Mechanical Ventilation
System
1.1 Carrier/Trane/ASHRAE Handbook
1.2 Uniform Building By-Laws 1984 / MS 1525
1.3 Bomba requirement
2. Heating, Ventilation and Air Conditioning (HVAC) Basics

2.1 Introduction to air conditioning
2.2 Principles of refrigeration
2.3 Psychrometrics
2.4 Cooling load estimation and software
2.5 Refrigerant issue
3. Air-Conditioning Systems and Energy Efficiency

3.1 Room air conditioners (RAC)
3.2 Split units
3.3 Air cooled packaged units
3.4 Water cooled packaged units
3.5 Chilled water system
3.6 Variable Refrigerant Flow (VRF) systems
3.7 Other systems and Energy Efficiency system design
4. Air & Water Distribution and Human Comfort

5. Equipment and Selection
6. AHRI & other Standards for Chillers & VRF systems
7. Latest development in ACMV in Malaysia
8. An introduction to Green and Sustainable Buildings
IV. Lifts and Escalators
Topic I
• Understanding the various components of the elevator system.
• Basic elevator specification.
Topic II
• Understanding concept of Lift Analysis and performance criteria.
• How to select the appropriate elevator systems to meet building requirements.
Topic III
• Understanding the installation process.
• Understanding the Factories and Machinery Act and other Codes.
Topic IV
• Understanding the basic components of escalator systems.
• Understanding the installation process of escalator systems.
• Some safety considerations in planning escalators in a building.
V. Cold Water Plumbing Systems

1. Rules and Regulations Governing Cold Water Plumbing Systems
1.1 Water supply rules (Cawangan Bekalan Air, JKR)
1.2 Local Authority requirements (JBA)
1.3 British Standards
2. Functions of Various Firms or Organisations in Cold Water Design and

Installations
2.1 Owners
2.2 Architects
2.3 Consultants
2.4 Contractors
2.5 Local Authorities
3. Cold Water Systems Design for Buildings

3.1 Plumbing cold water terminology
3.2 Standards applicable for cold water system design
3.3 Computation of water demand for various types of building
3.4 Tank sizing method and types of tank available in the market
3.5 Introduction of various cold water systems for building
3.6 Sizing of cold water supply pipes
3.7 Sizing of booster pumps and hydro-pneumatic pumps inclusive of types of
control
3.8 Pumps and accessories
3.9 Water hammer effects
4. Plumbing Cold Water Materials
4.1 Galvanised steel pipes and fittings
4.2 Copper tubing, solder joint and flare joint fittings
4.3 Plastic pipe and fittings
4.4 Uses of piping materials
4.5 Plumbing valves
4.6 Water meters
5. Joining, Installing and Supporting Pipe

5.1 Galvanised steel threaded joints
5.2 Copper tubing joints
5.3 Welded and flange joints
5.4 Plastic pipe joints
6. Testing and Inspecting the Plumbing System

6.1 Plumbing system tests
6.2 How to apply plumbing test
VI. Sanitary Plumbing Systems

1. Rules and Regulations Governing Sanitary Plumbing Systems
1.1 Local Authorities’ requirements (Unit Sanitari)
1.2 British Standards
2. Functions of Various Firms or Organisations in Sanitary Design

2.1 Owners
2.2 Architects
2.3 Consultants
2.4 Contractors
2.5 Local Authorities
3. Plumbing Sanitary Designs for Buildings

3.1 Plumbing sanitary terminology
3.2 Standards applicable for plumbing sanitary design
3.3 Introduction of various plumbing sanitary designs
3.4 Sizing of sanitary drainage and vent pipes
3.5 Design of grease traps for kitchen areas
4. Plumbing Sanitary Materials

4.1 Cast iron soil pipe and fittings
4.2 Plastic pipes and fittings
4.3 Uses of piping materials
5. Joining, Installing and Supporting Pipe
5.1 Cast iron soil pipe joints
5.2 Plastic pipe joints
5.3 Installing and supporting pipes
6. Testing and Inspecting the Plumbing System

6.1 Plumbing system tests
6.2 How to apply a plumbing test
VII. Fire Safety Systems

1. Rules and Regulations Governing Fire Fighting and Alarm Systems
1.1 Uniform Building By-Laws 1984
1.2 Fire Services Act
1.3 NFPA, LPC
1.4 Approval procedures
2. Passive Fire Safety Provisions (Architectural Scope of Responsibility)

2.1 Compartmentation for fire separation
2.2 Emergency escape exits and staircases
2.3 Fire fighting access
3. Active Fire Systems

3.1 External fire hydrants
3.2 Hose reel system
3.3 Dry and wet riser systems
3.4 Automatic sprinkler system
3.5 Portable extinguishers
3.6 Gaseous extinguishing systems
3.7 Foam system
4. Fire Detection and Alarm Systems

4.1 Smoke and heat detectors
4.2 Special detectors
4.3 Manual call points
4.4 Fire alarm panel
4.5 Conventional and addressable systems
5. Public Address and Intercom Systems

5.1 Public address system
5.2 Firemen’s intercom system
6. Smoke Control System

6.1 Smoke extraction system
6.2 Staircase pressurisation system
6.3 Fire lobby pressurisation system
7. Fire Mode Interface Operation with all other Services
7.1 Lifts
7.2 Genset
7.3 ACMV plants
7.4 Roller shutters
7.5 Automated doors
7.6 Central fire station
VIII. Extra Low Voltage System

1. Telecommunication System
1.1 Overview
1.2 Fixed Network Infrastructure
1.3 In-building fibre cabling for Fibre-to-the-premise
2. SMATV System
2.1 Theory of SMATV
2.2 SMATV System Design
3. CCTV Surveillance System

3.1 Camera and video fundamental
3.2 Lenses
3.3 Camera Selection
3.4 Analogue vs Digital
4. Security System
4.1 Introduction
4.2 Security Components
4.3 Perimeter and Interior Protection
5. Building Automation System

5.1 Introduction
5.2 Control – types of inputs and outputs
5.3 System Infrastructure
5.4 Integration with other systems
Course Lecturers (subject to change without prior notice)

Ir. Chong Chew Fan Greatians Consulting Sdn Bhd
Ir. Dr. N. Jayaseelan Plantmac Engineering Consultant
Ir. Ng Joo Yoong Primetech Engineers Sdn Bhd
Ir. Ng Yong Kong NYK Engineering & Trading Sdn Bhd
Ir. Walter Sim Kian Joo LYS Consult Sdn Bhd
Ir. Soon See Leak SoonSL Enterprise
Ir. Thin Voon Tuck MEP Engineering Sdn Bhd

ME Induction Course Brochure 2023

Uploaded by

Copyright:

Available Formats

ME Induction Course Brochure 2023

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ME Induction Course Brochure 2023

Uploaded by

Copyright:

Available Formats

Induction Course

for new M&E Engineers

Hotel Armada Petaling Jaya

The Association of Consulting Engineers Malaysia

Please click the link or scan QR code for ONLINE

Language / Course Notes

Others RM 1,000.00 per person

Closing date for registration is 18 September 2023.

Continuing Professional Development

2. Concept of Professionalism and Engineer’s Responsibility towards Society & the

II. Electrical High Voltage & Low Voltage Installations

2. Electricity Supply Planning

3. Considerations for High Voltage Supply Scheme Design

5. Protection Schemes and Testing

6. Lightning Protection Scheme and Earthing System

III. Air Conditioning and Mechanical Ventilation System

2. Heating, Ventilation and Air Conditioning (HVAC) Basics

3. Air-Conditioning Systems and Energy Efficiency

4. Air & Water Distribution and Human Comfort

V. Cold Water Plumbing Systems

2. Functions of Various Firms or Organisations in Cold Water Design and

3. Cold Water Systems Design for Buildings

5. Joining, Installing and Supporting Pipe

6. Testing and Inspecting the Plumbing System

VI. Sanitary Plumbing Systems

2. Functions of Various Firms or Organisations in Sanitary Design

3. Plumbing Sanitary Designs for Buildings

4. Plumbing Sanitary Materials

6. Testing and Inspecting the Plumbing System

VII. Fire Safety Systems

2. Passive Fire Safety Provisions (Architectural Scope of Responsibility)

3. Active Fire Systems

4. Fire Detection and Alarm Systems

5. Public Address and Intercom Systems

6. Smoke Control System

VIII. Extra Low Voltage System

3. CCTV Surveillance System

5. Building Automation System

Course Lecturers (subject to change without prior notice)

You might also like