Waukesha Gas Engines: Specifications

Waukesha gas engines Specifications
MODEL — P9390GSI, P9390X

BASIC MODEL SPECIFICATIONS
Type ....................................................................................................................................................................................... 4-cycle, overhead valve
Aspiration ........................................................................................................................................................................ Turbocharged & Intercooled
Number of cylinders .............................................................................................................................................................................................. V-16
Bore x stroke ............................................................................................................................................................. 9.375 x 8.50 in. (238 x 216 mm)
Displacement ....................................................................................................................................................................... 9388 cu. in. (153.9 liters)
Compression ratio – natural gas standard ratio / HD-5 propane ratio ................................................................................................................... 8:1
Speed range .................................................................... 700 – 1200 rpm continuous / 700 – 1200 rpm intermittent duty / 900 - 1200 rpm 9390X
Piston speed @ 1200 rpm .................................................................................................................................................. 1700 ft./min. (8.64 m/sec)
Low idle ............................................................................................................................................................................................................700 rpm
Flywheel housing – SAE No ................................................................................................................................... No housing - flywheel guard only
BEARINGS – MAIN
Number ..................................................................................................................................................................................................................... 10
Diameter x width (front) ............................................................................................................................................ 6.25 x 4.125 in. (159 x 105 mm)
Diameter x width (intermediate) ..................................................................................................................................... 6.25 x 3.0 in. (159 x 76 mm)
Diameter x width (center) ............................................................................................................................................... 6.25 x 3.0 in. (159 x 76 mm)
Diameter x width (rear) ............................................................................................................................................. 6.25 x 4.125 in. (159 x 105 mm)
Total main bearing projected area ................................................................................................................................... 201.6 sq. in. (1301 sq. cm)
BEARINGS – CRANKPIN
Diameter x width ........................................................................................................................................................... 6.25 x 2.50 in. (159 x 64 mm)
Total crankpin projected area.............................................................................................................................................. 250 sq. in. (1613 sq. cm)
COOLING SYSTEM
Jacket capacity, engine only .........................................................................................................................................................148 gal. (560 liters)
Maximum jacket water pump inlet head .............................................................................................................................. 50.0 ft. (15.24 m) of H2O
Normal jacket water temperature out of engine .....................................................................................................................................180°F (82°C)
Jacket water inlet two connections, hose ID..................................................................................................................................... 4.5 in. (114 mm)
Jacket water outlet, hose ID ................................................................................................................................................................. 6 in. (152 mm)
EXHAUST SYSTEM
Maximum permissible backpressure at 180 BMEP @ 1200 rpm ..................................................................................... 21 in. (533 mm) of H2O (1)
Exhaust outlet, pipe flange .............................................................................................................................................................. 14.0 in. (356 mm)
FUEL SYSTEM
Natural gas pressure at regulator ...................................................................................................................................30 – 60 psi (207 – 414 kPa)
Natural gas inlet, pipe size ............................................................................................................................................................... 2.0 in. (50.8 mm)
AIR INDUCTION SYSTEM (DUCTING, FILTER & SILENCER)
Maximum permissible restriction:
• Pre-filter pad .................................................................................................................................................................... 2 in. (51 mm) of H2O
• Main filter element ......................................................................................................................................................... 6 in. (152 mm) of H2O
LUBRICATION SYSTEM
Approximate capacity including sump, filters and cooler .............................................................................................................165 gal. (625 liters)
Normal lube oil pressure .................................................................................................................................................30 – 50 psi (242 – 345 kPa)
STARTING SYSTEM
Regulated starting air ............................................................................................................................................................... 150 psi (1034 kPa) (2)
MISCELLANEOUS
Recommended minimum spacing between engines......................................................................................................................... 36 in. (914 mm)
Recommended minimum overhead clearance ............................................................................................................................................... (Note 3)
Engine dry weight ..................................................................................................................................................................... 28,750 lb. (13,041 kg)
Heaviest engine part, top overhaul, cylinder head assembly ..............................................................................................................205 lb. (93 kg)
Heaviest engine part, cylinder block assembly ............................................................................................................................. 6000 lb. (2722 kg)
NOTES:
1. Reduce maximum permissible backpressure by:
1.5 in. (38 mm) H2O for each 100 rpm reduction in rated speed.
1.5 in. (38 mm) H2O for each 10 BMEP reduction in rated load.
Do not apply reductions below an exhaust backpressure of 4 in. (102 mm) H2O.
2. Pressure is based on 50°F (10°C) lubricating oil temperature.
3. Sufficient height to permit use of a chain hoist for removal of heavier components.
PROPRIETARY AND CONFIDENTIAL – INFORMATION CONTAINED IN THIS DOCUMENT MAY NOT BE USED, COPIED, DISCLOSED, OR EXPORTED WITHOUT WRITTEN PERMISSION
OF INNIO WAUKESHA GAS ENGINES INC. Copyright © 2023 INNIO WAUKESHA
Page 1 of 1
Ref.
Specifications EN: E2021959
S
Model P9390GSI & P9390X DATE: 5/23
6532-5

Waukesha Gas Engines: Specifications

Uploaded by

Copyright:

Available Formats

Waukesha Gas Engines: Specifications

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Waukesha Gas Engines: Specifications

Uploaded by

Copyright:

Available Formats

Waukesha gas engines Specifications

MODEL — P9390GSI, P9390X

You might also like