This document provides product data for Hempel's 15ASG, a two-component, abrasion resistant epoxy primer. It has excellent anticorrosive properties and is recommended for use as a self-primed high performance coating system for atmospheric or water service, including water ballast tanks on tugs and barges. Key features include curing down to -10°C and excellent anticorrosive and mechanical properties. Proper surface preparation is required including abrasive blasting and cleaning before application. It has a pot life of 1-3 hours depending on temperature and must be applied when surface and ambient temperatures are above -10°C.
This document provides product data for Hempel's 15ASG, a two-component, abrasion resistant epoxy primer. It has excellent anticorrosive properties and is recommended for use as a self-primed high performance coating system for atmospheric or water service, including water ballast tanks on tugs and barges. Key features include curing down to -10°C and excellent anticorrosive and mechanical properties. Proper surface preparation is required including abrasive blasting and cleaning before application. It has a pot life of 1-3 hours depending on temperature and must be applied when surface and ambient temperatures are above -10°C.
This document provides product data for Hempel's 15ASG, a two-component, abrasion resistant epoxy primer. It has excellent anticorrosive properties and is recommended for use as a self-primed high performance coating system for atmospheric or water service, including water ballast tanks on tugs and barges. Key features include curing down to -10°C and excellent anticorrosive and mechanical properties. Proper surface preparation is required including abrasive blasting and cleaning before application. It has a pot life of 1-3 hours depending on temperature and must be applied when surface and ambient temperatures are above -10°C.
This document provides product data for Hempel's 15ASG, a two-component, abrasion resistant epoxy primer. It has excellent anticorrosive properties and is recommended for use as a self-primed high performance coating system for atmospheric or water service, including water ballast tanks on tugs and barges. Key features include curing down to -10°C and excellent anticorrosive and mechanical properties. Proper surface preparation is required including abrasive blasting and cleaning before application. It has a pot life of 1-3 hours depending on temperature and must be applied when surface and ambient temperatures are above -10°C.
Handle with care. Before and during use, observe safety labels on packaging and paint containers and follow all local and national safety Description regulations. Always consult Hempel’s Safety Data Sheet for this Hempel’s 15ASG is a two-component, abrasion resistant, pure epoxy product along with the Product Data Sheet. primer with excellent anticorrosive properties. The product has optimized performance properties for different harsh service For professional use only. conditions.
Recommended use As a self-primed high performance coating system for atmospheric or Product data in water service, including water ballast tanks. Hempel’s 15ASG is also suitable for tugs and barges. Hempel’s 15ASG is intended for all year application down to -10°C/14°F and for applications where fast Product code recoating and handling is required. 15ASG
Service temperature: Product components
- Maximum, dry exposure only: 120°C [248°F]. Base 15AS9 Curing agent 950SG Features - Excellent anticorrosive and very good mechanical properties. Standard shade* / code Curing down to -10°C/14°F. Dark brown 67120 **
Specific gravity VOC content mixed product 1.5 kg/L [12 lb/US gal] Legislation Value Reference dry film thickness EU 271 g/L [2.26 lb/US gal] 125 micron [4.9 mils] US (coatings) 271 g/L [2.26 lb/US gal]
US (regulatory) 271 g/L [2.26 lb/US gal]
Canada 271 g/L [2.26 lb/US gal]
China 271 g/L [2.26 lb/US gal]
Hong Kong 271 g/L [2.26 lb/US gal]
Korea 271 g/L [2.26 lb/US gal]
* Other shades are available, please contact your local Hempel representative. Issued by Hempel A/S - June 2021 ** Slight discolouration may occur. This does not affect the performance of the coating. 1/4 Product Data Sheet
Hempel's 15ASG
Surface preparation Pot life
Product 15°C 20°C 30°C
Cleanliness temperature [59°F] [68°F] [86°F] - Remove oil, grease and other contaminants by suitable detergent cleaning. Pot life 3 hours 2 hours 1 hour - Remove salts, detergents, contaminants and marine growth by high Pot life (spray) 3 hours 2 hours 1 hour pressure fresh water cleaning. Pot life (brush) 3 hours 2 hours 1 hour New build: - Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC). Application method - Remove dust, blast media and loose materials. Tool Application parameters Maintenance and Repair Nozzle pressure: 250 bar [3600 psi] - Spot abrasive blasting to min. PSa 2 (ISO 8501-2) / SP 6 (SSPC). Airless spray Nozzle orifice: 0.021-0.025" - Water jetting to Wa 2½ (ISO 8501-4). - Flash rust degree of maximum FR M (ISO 8501-4). If brush or roller application is used, more coats will be necessary to achieve - Minor areas may be hand or power tool cleaned instead of abrasive the specified dry film thickness. Spray data are indicative and subject to blasting. adjustment. Pressure is for a material temperature of 20°C [68°F]. - Remove dust, blast media and loose materials.
Film thickness Roughness - Surface profile Medium (G) (ISO 8503-2). Specification range Low High Recommended
Consult Hempel's separate Surface Preparation Guidelines for more 100 micron 200 micron 125 micron Dry film thickness details. [3.9 mils] [7.9 mils] [4.9 mils]
150 micron 275 micron 175 micron
Wet film thickness [6 mils] [11 mils] [7 mils]
7.1 m²/L 3.6 m²/L 5.7 m²/L
Application Theoretical spreading [290 sq ft/US [150 sq ft/US [230 sq ft/US rate gal] gal] gal] Mixing ratio Product may be specified in another film thickness than indicated depending Base 15AS9 : Curing agent 950SG on purpose and area of use. This will alter spreading rate, drying and curing (3 : 1 by volume) time and overcoating interval.
Stir well before use.
Application conditions - To avoid condensation, apply on a clean and dry surface with a Thinner temperature that is at least 3°C [5°F] above the dew point. Hempel's Thinner 08450 - Surface temperature must be above -10°C [14°F] during application and curing. Cleaner Hempel's Tool Cleaner 99610
Issued by Hempel A/S - June 2021
2/4 Product Data Sheet
Hempel's 15ASG
Drying and overcoating Storage
Product compatibility Shelf life - Previous coat: None or according to Hempel’s specification. When diluted 25-30%, the product can be used as blast primer preceding 25°C Ambient temperature a full coat application of the product. [77°F] - Subsequent coat: According to Hempel’s Specification. Base 36 months
Curing agent 12 months
Drying time Shelf life from date of production, when stored in original, unopened -10°C 0°C 20°C 40°C containers. Thereafter, the product quality must be re-inspected. Always check Surface temperature the best before date or expiry date on the label. [14°F] [32°F] [68°F] [104°F]
Surface dry hours 28 12 3½ 2
Storage conditions Hard dry hours 35 14 4 2½ - Product must be stored according to local legislation, at 40°C [104°F] without direct sunlight and protected from rain and snow. Dry to walk on hours 42 21 4½ 3
Fully cured days 40 20 5 1½
Determined for dry film thickness 125 micron [4.9 mils] at standard conditions, see Hempel’s Explanatory Notes for details.
Overcoating Hempel’s specification supersedes any guidelines indicated in the overcoating table
-10°C 0°C 20°C 40°C
Quality name [14°F] [32°F] [68°F] [104°F]
Immersion
Min 27 h 14 h 3h 90 min Hempel's 15ASG Max 90 d 63 d 14 d 7d
Drying conditions - To obtain the drying time stated, it is important to maintain sufficient ventilation during application, drying and curing.
Overcoating details - If the maximum overcoating interval is exceeded, roughening of the surface is necessary to ensure intercoat adhesion. - The surface must be dry and clean prior to application.
Other remarks - Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating. - Hempel’s Specification supersedes any recommendations given in the Product Data Sheets.
Issued by Hempel A/S - June 2021
3/4 Product Data Sheet
Hempel's 15ASG
Additional documents Additional information is available at the Hempel website hempel.com or at your local Hempel website:
- Explanatory Notes explaining the fields in this Product Data Sheet.
- Surface Preparation Guidelines. - Application Guidelines for different application methods. - General Application Guidelines
This Product Data Sheet (“PDS”) relates to the supplied product (“Product”) and is subject to updating from time-to-time. Accordingly, the buyer/applicator should have regard to the PDS supplied together with the relevant batch of the Product (and not an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the following specifications, statements and/or guidelines as listed below or as are available from the Hempel website under ‘Products’ at www.hempel.com (the “Additional documents”): No. Document description Location/comments 1. Technical Statement One-off specific advice provided on request for specific projects 2. Specification Only issued for specific projects 3. PDS This document 4. Explanatory Notes to the PDS Available at www.hempel.com and contain relevant information about the Product testing parameters 5. Application Instruction Where available, at www.hempel.com 6. Generic technical guidelines (e.g. on application and surface preparation) Where available, at www.hempel.com
In the event of a conflict of information between the PDS and the Additional documents, the order of priority of information shall be in the order as set out above. In such event you should also contact your representative at Hempel for clarification. Furthermore, the buyer/applicator must have full regard to the relevant Safety Data Sheet provided with each Product and which can also be downloaded from www.hempel.com. Hempel shall not be liable for defects where the application of the Product has not been made fully in accordance with the recommendations and requirements set out in the relevant PDS and the Additional Documents. The information and terms of this disclaimer apply to this PDS, the Additional documents and any other documents supplied by Hempel in respect of the Product. In addition, the Product is supplied and all technical assistance is given subject to Hempel’s General Conditions of Sale, Delivery and Service, unless otherwise expressly agreed in writing.
