Secoroc Rock Drilling Tools

Down-the-hole drill strings for CM 700 series

Secoroc high quality DTH drill string equipment

Atlas Copco Secoroc offers a complete DTH drill string for the CM 700 series.
This brochure will help you to select the right DTH equipment for each field application.
Atlas Copco CM drill rigs
The CM 760/765/780/785 are high capacity down-the- This system uses Z threaded spindle and pipes.
hole crawlers for drilling with 3", 4", 5" and 6" ham- Z thread is coarse and robust with low torque re-
mers in aggregate and limestone quarries or in vol- quirement and un-coupling is done directly by the
ume mining operations. rod lock in the rotary head with no need for floating
sub and hard grip centralizer. (See Z thread vs API
The CM drill rigs contributes to higher productivity
thread below.)
by drilling high-quality holes at a high penetration
rate with optimum fuel consumption, long accessory
life and low overall maintenance cost.
The CM drill rigs are equipped with a powerful rotary
head DDRH (Direct Driven Rotary Head), using the
Rod Lock Sleeve System, with high torque. Z thread API thread

Secoroc drill bits – standard assortment

Flat front SpeedBit Convex front, Concave front Rocket bit

Applications: Applications: ballistic Applications: Applications:
Hard and abrasive Medium hard to Applications: Medium hard to hard Soft to medium hard
formations, all round. hard and abrasive Soft to medium hard formations. Less formations. For ex-
Typical formations: formations. For higher rock. Non abrasive abrasive, fractured ceptional productivity.
Granite, hard lime- productivity. formations. High formations. Excellent Fractured rock.
stone, basalt. Design feature: penetration rate. control over hole Design feature:
Ballistic buttons in Typical formations: deviation. Spherical buttons for
front. Limestone, hard lime- Design feature: hard and abrasive
Typical formations: stone, shale. HD - larger gauge formations.
Granite, hard lime- buttons. DGR - double Ballistic buttons for
stone, basalt. (overlapping) gauge soft formations.
row. Only from 8". Typical formations:
Typical formations: Limestone, hard lime-
Granite, hard lime- stone.
stone, basalt.
Secoroc drill bits
TD 35 (DHD 3.5 shank) COP 44 (DHD 340A shank)
Weight Weight
Diameter Diameter
approx approx
Product No. Product code Product No. Product code
mm inch kg lbs mm inch kg lbs

FLAT FRONT FLAT FRONT

90 3 9/16 90515317 100-5090-35-1214,10-20 5.8 12.8 110 4 5/16 90513714 100-5110-34-1210,10-20 8.8 19.4
92 3 5/8 90515318 100-5092-35-1214,10-20 5.8 12.8 115 4 1/2 90513715 100-5115-34-1210,10-20 9 19.8
95 3 3/4 90515319 100-5095-35-1214,10-20 5.9 13.0 125 4 15/16 90513716 100-5125-34-1210,10-20 9.5 20.9
100 3 15/16 90515320 100-5100-35-121A,10-20 6.1 13.4 130 5 1/8 90515203 100-5130-34-1218,10-20 9.9 21.8
105 4 1/8 90515321 100-5105-35-1210,10-20 6.3 13.9 SPEEDBIT
SPEEDBIT 110 4 5/16 90513719 100-5110-34-1250,10-20 8.8 19.4
92 3 5/8 90515322 100-5092-35-1254,10-20 5.8 12.8 115 4 1/2 90513720 100-5115-34-1250,10-20 9 19.8
95 3 3/4 90515323 100-5095-35-1254,10-20 5.9 13.0 125 4 15/16 90513721 100-5125-34-1250,10-20 9.7 21.4
100 3 15/16 90515324 100-5100-35-125A,10-20 6.1 13.4 130 5 1/8 90513722 100-5130-34-1250,10-20 9.7 21.4
105 4 1/8 90515325 100-5105-35-1250,10-20 6.3 13.9 CONCAVE
CONVEX BALLISTIC 110 4 5/16 90514995 100-5110-34-0210,10-20 8.6 19.0
92 3 5/8 90515326 100-5092-35-223A,10-20 5.5 12.1 115 4 1/2 90514996 100-5115-34-0210,10-20 9 19.8
95 3 3/4 90515327 100-5095-35-223A,10-20 5.6 12.3 121 4 3/4 90514999 100-5121-34-0210,10-20 9.1 20.1
100 3 15/16 90515328 100-5100-35-223A,10-20 5.6 12.3 130 5 1/8 90515551 100-5130-34-0218,10-20 9.4 20.7
105 4 1/8 90515329 100-5105-35-2239,10-20 5.8 12.8 CONVEX BALLISTIC
CONCAVE 110 4 5/16 90513724 100-5110-34-2230,10-20 8.3 18.3
100 3 15/16 90515330 100-5100-35-021A,10-20 5.2 11.4 115 4 1/2 90513725 100-5115-34-2239,10-20 8.6 19.0
ROCKET BIT 125 4 15/16 90513726 100-5125-34-223A,10-20 8.8 19.4
90 3 9/16 90515757 100-5090-35-623A,10-20 5.1 11.2 130 5 1/8 90513727 100-5130-34-223A,10-20 9.2 20.3
95 3 3/4 90515700 100-5095-35-623A,10-20 5.3 11.7 ROCKET BIT - BALLISTIC
FOOT VALVE 90515375 9091 110 4 5/16 90515306 100-5110-34-623A-10-20 8.7 19.2

ASSEMBLY TOOL 90515511 115 4 1/2 90515305 100-5115-34-623A-10-20 8.9 19.6

9110
ROCKET BIT - SPHERICAL
115 4 1/2 90515548 100-5115-34-6210-10-20 8.9 19.6
FOOT VALVE 86002883 9227
ASSEMBLY TOOL 89001223 9226

COP 54 Gold Express (QL 50 shank) COP 64 Gold (QL 60 shank)

Weight
Diameter Weight approx Diameter
approx
Product No. Product code Product No. Product code
mm Inch kg lbs mm Inch kg lbs

FLAT FRONT FLAT FRONT

134 5 1/4 90514420 100-5134-25-1218,10-20 16.2 35.7 156 6 1/4 90515691 100-5156-26-1217,08-20 22.5 49.6
140 5 1/2 90514382 100-5140-25-1218,10-20 16.6 36.6 159 6 1/4 90515688 100-5159-26-1217,08-20 22.8 50.3
149 5 7/8 90515091 100-5149-25-1218,10-20 17.1 37.7 165 6 2/4 90515613 100-5165-26-1217,08-20 24.2 53.4
152 6 90514958 100-5152-25-1217,10-20 17.8 39.25 165 6 2/4 90515589 100-5165-26-1211,08-20 24.4 53.8
SPEEDBIT 165 6 2/4 90515609 100-5165-26-1241,08-20 24.4 53.8
134 5 1/4 90514674 100-5134-25-1248,10-20 16.2 35.7 SPEEDBIT
140 5 1/2 90514386 100-5140-25-1248,10-20 16.6 36.6 156 6 1/4 90515705 100-5156-26-1247,08-20 22.5 49.6
CONCAVE CONCAVE
134 5 1/4 90514424 100-5134-25-0218,10-20 16.1 35.5 156 6 1/4 90515684 100-5156-26-0217,08-20 22.3 49.2
140 5 1/2 90514387 100-5140-25-0218,10-20 16.4 36.2 159 6 1/4 90515673 100-5159-26-0217,08-20 22.6 49.8
146 5 3/4 90514484 100-5146-25-0217,10-20 17.2 37.9 165 6 1/2 90515616 100-5165-26-0217,08-20 24 52.9
149 5 7/8 90515089 100-5149-25-0218,10-20 17.5 38.6 165 6 1/2 90515598 100-5165-26-0211,08-20 24.2 53.4
152 6 90514974 100-5152-25-1217,10-20 17.7 39.0 CONVEX - BALLISTIC
CONVEX BALLISTIC 165 6 1/2 90515641 100-5165-26-2337,08-20 23.8 52.3
140 5 1/2 90515424 100-5140-25-2339,10-20 16.3 35.9 CONVEX - SPHERICAL
140 5 1/8 90515428 100-5140-25-2237,10-20 16.2 35.7 165 6 1/2 90515652 100-5165-26-221b,08-20 24.3 53.6
146 5 3/4 90514713 100-5146-25-2338,10-20 17.1 37.7 FOOT VALVE 90514253 9283
FOOT VALVE 90515427 9257 ASSEMBLY TOOL 89001230 9188
ASSEMBLY TOOL 89000993 9190
CM-760
Rotation unit
Spindle adapter Drill pipe Starter pipe DTH hammer Bit
DDRH-A
3" pipes/ 3.5" API Reg Pin x 2.0" Z Box L=4.0m (13'), OD=76mm (3"), L=2.9m (9.54'), OD=76mm (3"), TD 35 STD 90-105 mm
3" hammer Prod. No. 52100435 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 2 3/8" Reg Pin (3 1/2"-4 1/8")
Prod.code 2.0" Z Pin x 2.0" Z Box 2.0" Z Pin x API 2 3/8" Reg Box Prod. No. 52312923
3Z1-2076-14-012-01-B87,41 Prod. No. 51788479 Prod. No. 51985885 Prod. code
Prod. code 2Z1-076-0400-B65-L0, 40-06 Prod. code 2Cl-076-0290-A65-L0, 40-08 9703-03-60-00

3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=4.0m (13'), OD=89mm (3.5"), L=2.7m (8.86'), OD=89mm (3.5"), COP 44 STD 110-130 mm
4"hammer Prod. No. 52137015 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 2 3/8" Reg Pin (4 5/16"-5 1/8")
Prod.code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 2 3/8" Reg Box Prod. No. 89004882
3Z3-2089-14-012-01-B87,41 Prod. No. 57699050 Prod. No. 57699043 Prod. code 9704-03-04
Prod. code 2Z3-089-0400-B65-L0, 40-06 Prod. code 2CJ-089-0270-A65-L0, 40-08

3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=4.0m (13'), OD=89mm (3.5"), L=2,4m (7.87'), OD= 89mm (3.5"), COP 54 GE 134-152 mm
5" hammer Prod. No. 52137015 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod.code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3.5" Reg Box Prod. No. 89001243
3Z3-2089-14-012-01-B87,41 Prod. No. 57699050 Prod. No. 57699035 Prod. code 9705-05-34
Prod. code 2Z3-089-0400-B65-L0, 40-06 Prod. code 2CK-089-0240-A65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36

4" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=4,0m (13'), OD=102mm (4"), L=2.7m (8.86'), OD=102mm (4"), COP 54 GE 134-152 mm
5" hammer Prod. No. 52100427 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod.code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3 .5" Reg Box Prod. No. 89001243
3Z3-2102-14-012-01-B87, 41 Prod. No. 51788487 Prod. No. 51985893 Prod. code 9705-05-34
Prod. code 2Z3-102-0400-B65-L0, 40-06 Prod. code 2CK-102-0270-A65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36

CM-765
Rotation unit
Spindle adapter Drill pipe Starter pipe DTH hammer Bit
DDRH-A
3" pipes/ 3.5" API Reg Pin x 2.0" Z Box L=5.0m (16.4'), OD=76mm (3"), L=4.6m (15.1'), OD=76mm (3"), TD 35 STD 90-105 mm
3" hammer Prod. No. 52100435 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 2 3/8" Reg Pin (3 1/2"-4")
Prod. code 2.0" Z Pin x 2.0" Z Box 2.0" Z Pin x API 2 3/8" Reg Box Prod. No. 52312923
3Z1-2076-14-012-01-B87, 41 Prod. No. 57844078 Prod. No. 57882326 Prod. code
Prod. code 2Z1-076-0500-B65-L0, 40-06 Prod. code 2Cl-076-0460-A65-L0, 40-08 9703-03-60-00

3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=5.0m (16.4'), OD=89mm (3.5"), L=4.6m (15.1'), OD=89mm (3.5"), COP 44 STD 110-130 mm
4" hammer Prod. No. 52137015 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 2 3/8" Reg Pin (4 5/16"-5 1/8")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 2 3/8" Reg Box Prod. No. 89004882
3Z3-2089-14-012-01-B87, 41 Prod. No. 57844060 Prod. No. 57882292 Prod. code 9704-03-04
Prod. code 2Z3-089-0500-B65-L0, 40-06 Prod. code 2CJ-089-0460-A65-L0, 40-08

3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=5.0m (16.4'), OD=89mm (3.5"), L=4.4m (14.4'), OD=89mm (3.5"), COP 54 GE 134-152 mm
5" hammer Prod. No. 52137015 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3 .5" Reg Box Prod. No. 89001243
3Z3-2089-14-012-01-B87, 41 Prod. No. 57844060 Prod. No. 57882284 Prod. code 9705-05-34
Prod. code 2Z3-089-0500-B65-L0, 40-06 Prod. code 2CK-089-0440-A65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36

4" string/ 3.5" API Reg Pin x 2.5" Z Box L=5.0m (16.4'), OD=102mm (4"), L = 4.4m (14.4'), OD=102mm (4"), COP 54 GE 134-152 mm
5" hammer Prod. No. 52100427 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3 .5" Reg Box Prod. No. 89001243
3Z3-2102-14-012-01-B87, 41 Prod. No. 57794422 Prod. No. 57882318 Prod. code 9705-05-34
Prod. code 2Z3-102-0500-B65-L0, 40-06 Prod. code 2CK-102-0440-B65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36
CM-780
Rotation unit
Spindle adapter Drill pipe Starter pipe DTH hammer Bit
DDRH-C
3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=4.0m (13'), OD=89mm (3.5"), L=2.7m (8.9'), OD=89mm (3.5"), COP 44 STD 110-130 mm
4" hammer Prod. No. 57683922 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 2 3/8" Reg Pin (4 5/16"-5 1/8")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 2 3/8" Reg Box Prod. No. 89004882
3Z3-2089-14-012-01-B88, 41 Prod. No. 57699050 Prod. No. 57699043 Prod. code 9704-03-04
Prod. code 2Z3-089-0400-B65-L0, 40-06 Prod. code 2CJ-089-0270-A65-L0, 40-08

3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=4.0m (13'), OD=89mm (3.5"), L=2.4m (7.9'), OD=89mm (3.5"), COP 54 GE 134-152 mm
5" hammer Prod. No. 57683922 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3 .5" Reg Box Prod. No. 89001243
3Z3-2089-14-012-01-B88, 41 Prod. No. 57699050 Prod. No. 57699035 Prod. code 9705-05-34
Prod. code 2Z3-089-0400-B65-L0, 40-06 Prod. code 2CK-089-0240-A65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36

4" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=4.0m (13'), OD=102mm (4"), L=2.7m (8.9'), OD=102mm (4"), COP 54 GE 134-152 mm
5"/6" hammer Prod. No. 57683914 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3 .5" Reg Box Prod. No. 89001243
3Z3-2102-14-012-01-B88, 41 Prod. No. 51788487 Prod. No. 51985893 Prod. code 9705-05-34
Prod. code 2Z3-102-0400-B65-L0, 40-06 Prod. code 2CK-102-0270-A65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36

COP 64 Gold 152-165 mm

API 3.5" Reg Pin (6"-6 1/2")
Prod. No. 89000959
Prod. code 9706-05-34

COP 64 Gold QM 159-165 mm

API 3.5" Reg Pin (6 1/4"-6 1/2")
Prod. No. 89000960
Prod. code 9706-05-36

CM-785
Rotation unit
Spindle adapter Drill pipe Starter pipe DTH hammer Bit
DDRH-C
3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=5.0m (16.4'), OD=89mm (3.5"), L=4.6m (15.1'),OD=89mm (3.5"), COP 44 STD 110-130 mm
4" hammer Prod. No. 57683922 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 2 3/8" Reg Pin (4 5/16"-5 1/8")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 2 3/8" Reg Box Prod. No. 89004882
3Z3-2089-14-012-01-B88, 41 Prod. No. 57844060 Prod. No. 57882292 Prod. code 9704-03-04
Prod. code 2Z3-089-0500-B65-L0, 40-06 Prod. code 2CJ-089-0460-A65-L0, 40-08

3.5" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=5.0m (16.4'), OD=89mm (3.5"), L=4.4m (14.4'), OD=89mm (3.5"), COP 54 GE 134-152 mm
5" hammer Prod. No. 57683922 Wall=6,3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3 .5" Reg Box Prod. No. 89001243
3Z3-2089-14-012-01-B88, 41 Prod. No. 57844060 Prod. No. 57882284 Prod. code 9705-05-34
Prod. code 2Z3-089-0500-B65-L0, 40-06 Prod. code 2CK-089-0440-A65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36

4" pipes/ 3.5" API Reg Pin x 2.5" Z Box L=5.0m (16.4'), OD=102mm (4"), L=4.4m (14.4'), OD=102mm (4"), COP 54 GE 134-152 mm
5"/6" hammer Prod. No. 57683914 Wall=6.3mm (0.25"), Wall=8.8mm (0.37"), API 3.5" Reg Pin (5 1/4"-6")
Prod. code 2.5" Z Pin x 2.5" Z Box 2.5" Z Pin x API 3 .5" Reg Box Prod. No. 89001243
3Z3-2102-14-012-01-B88, 41 Prod. No. 57794422 Prod. No. 57882318 Prod. code 9705-05-34
Prod. code 2Z3-102-0500-B65-L0, 40-06 Prod. code 2CK-102-0440-A65-L0, 40-08
COP 54 GE QM 140-152 mm
API 3.5" Reg Pin (5 1/2"-6")
Prod. No. 89001255
Prod. code 9705-05-36

COP 64 Gold 152-165 mm

API 3.5" Reg Pin (6"-6 1/2")
Prod. No. 89000959
Prod. code 9706-05-34

COP 64 Gold QM 159-165 mm

API 3.5" Reg Pin (6 1/4"-6 1/2")
Prod. No. 89000960
Prod. code 9706-05-36
 DTH hammer TD 35 STD COP 44 STD COP 54 GE/QM COP 64 G/QM

Product No. 52312923 89004882 89001243 / 89001255 89000959 / 89000960

Product code 9703-03-60-00 9704-03-04 9705-05-34/9705-05-36 9706-05-34/9706-05-36
General specifications:
Top sub thread 2 3/8API Reg Pin 2 3/8 API Reg Pin 3 1/2 API Reg Pin 3 1/2 API Reg Pin
Shank style DHD 3.5 DHD 340 QL 50 QL 60
Outside diam (in & mm) 3.13 79.4 3.86 98.0 4.72 120.0 5.59 142.0
Bit size 90–105 mm (3 1/2"–4 1/8") 110–130 mm (4 3/16"–5 1/8") 134–152 mm (5 1/4"–6")/ 156–165mm (6 1/8"–6 1/2")
140–152 mm (5 1/2"–6") 159–165 mm (6 1/4"–6 1/2")
Length with bit (in & mm) 35.2 894.1 41.46 1053.0 47.91 1217.0 49.53 1258.0
Weight w/o bit (lb & kg) 65 29.5 83.60 38.0 145.20 66.0 209.00 95.0
Maximum pressure
differential (psig & bar) 350.0 24.1 362.5 25.0 435.0 30.0 435.0 30.0
Operational specifications:
Feed force (lbs & kN) 1500-2000 / 7-9 2000-3000 / 9-13 4500-6000 / 20-27 4500-6000 / 20-27
Rotation speed (rpm) 70-100 30-50 15-25 15-25

ROP (rate of penetration)

in Swedish granite
DTH hammer at 25 bar/363 psi Quartz (SiO2): 28%
(bit size) Rock strength: 220 MPa/31 900 psi
m/min ft/min
TD 35 (100 mm, 4") 0,96 3,15
COP 44 (115 mm, 4.5") 0,80 2,62
COP 54GE, QM (140 mm, 5.5") 0,87 2,85
COP 64 G, QM (165mm, 6.5") 0,84 2,76

Air consumption / Working pressure

l/s
Air Consumption/Working pressure
650

600 TD35 STD

COP44 TD35 STD
550 COP44
COP54 GE, QM
500 COP54 GE, QM
COP64 GOLD, QM
COP64 GOLD, QM
450

400
l/s
350

300

250

200

150

100
100l/s = 213cfm
50 1bar= 14.5psi
0 Bar
0 5 10 15 Bar 20 25 30

30
 Breakout
bench
The threaded con-
nections of the driver
COP oil chuck and top sub
may become very
• A semi-synthetic oil based on >90% renewable
tightly tensioned
raw materials.
during drilling. It is
• Uses carefully selected components to provide the convenient to break
highest technical performance for pneumatic and the hammer threads
hydraulic rock drilling equipment. on the rig, but if the
• Withstands heavy loads while protecting against threads cannot be loosened or tend to get stuck, a
wear and corrosion. breakout bench is the solution.
• Provides optimum operation under variable air This handy but powerful breakout bench can easily
temperatures due to a broad operational tempera- be placed in a workshop or container and it breaks
ture range. DTH hammers between 3–8".
• Utilizes the latest technology to provide decreased The breakout bench is available in two designs.
environmental impact. NOTE! The breakout bench is delivered without
wrench keys.
Quantity Product No.

10 litres 3115 3125 00

Description Product No. Product code
Can pallet - 48x10 litres 3115 3126 00
Drum - 208 litres Hydraulic with hand pump 90514057 9178
3115 3127 00
Hydraulic with air operated foot 90514348 9176
pump,req. 6-12 bar air

Selecting the right pipe

Key features of a high quality DTH pipe are durabili-
ty, accuracy and manageability. Atlas Copco Secoroc
Super-Tac premium rock drill oil pipes are made from cold drawn piping, providing
a superior surface finish and tolerance compared
• Specially formulated oil engineered and devel-
to conventional pipes made from hot rolled piping.
oped to meet the demanding requirements of high
This drastically reduces the risk of scaling from the
performance drilling systems.
pipes entering the hammer, a major cause of pre-
• Extended warranties are offered for hammers mature hammer failure.
lubricated with SUPER-TAC.
The joints are friction welded to achieve maximum
Product No. Product No. Product No. Product No. strength, and the threads of the end-pieces are heat
Grade 3.8 liter 18.9 liter 207 liter 1130 liter
/ 1 gallon / 5 gallon / 55 gallon / 300 gallon treated for optimum durability and strength of the
Light 52334174 52333192 52333200 52343225 thread profile. This not only ensures long thread life,
Medium 52334182 52333218 52333226 52343233 but also makes coupling and uncoupling quick and
Heavy 52334190 52333234 52333242 52343241
simple, reducing drilling time.
Extra heavy 52334208 52333259 52333267 52343258
Pipe diameter should be close to the hammer di-
ameter to provide optimum flushing, reducing the
chances of getting stuck.
Accessories
J-wrench assembly for pipes
Product No. Product code Pipe size
J-wrench assembly
57747354 9474 3"
57747271 9475 3 1/2"
57747289 9476 4"

J-wrench assembly for COP/QL-series DTH hammers

Product No. Product code Hammer Spanner flat Thread

57746471 9477 TD 35, COP 44, QL 40     65 mm 2 3/8"
57746471 9477 COP 54 Gold Express     65 mm 2 3/8", 2 7/8"
57746455 9478 QL 50/55     89 mm 3 1/2"
58009655 9479 COP 54 Gold Express     95 mm 4"
57747255 9480 COP 64 Gold, QL 60/65 102 mm 4 1/2"

Chain-wrench for bit/hammer removal

Product No. Product code Chain-wrench
57809360 9481 3"–3 3/4"
50821487 9482 4 1/2"–5 3/8"

Subjected to alterations without prior notice. © Atlas Copco Secoroc AB. All rights reserved. 2008.05
Chain-wrench
50260314 9483 5 3/8"–6 1/4"

Spindle adapter
Product No. Product code Spindle adapter Pipe size Drill rig
Spindle adapter
52100435 3Z1-2076-14-012-01-B87, 41 3.5" API Reg Pin x 2.0" Z Box 3" CM 760/765
52137015 3Z3-2089-14-012-01-B87, 41 3.5" API Reg Pin x 2.5" Z Box 3 1/2" CM 760/765
52100427 3Z3-2102-14-012-01-B87, 41 3.5" API Reg Pin x 2.5" Z Box 4" CM 760/765
57683922 3Z3-2089-14-012-01-B88, 41 3.5" API Reg Pin x 2.5" Z Box 3 1/2" CM 780/785
57683914 3Z3-2102-14-012-01-B88, 41 3.5" API Reg Pin x 2.5" Z Box 4" CM 780/785

The Atlas Copco Secoroc division has additional information regarding drill string consumables.
9851 2572 01b

Atlas Copco Secoroc AB

Box 521, SE-737 25 Fagersta, Sweden
Phone: +46 223 461 00
E-mail: secoroc@se.atlascopco.com
www.atlascopco.com