This document provides a technical sheet for the DG244 double mitre saw. The saw allows for cutting of profiles at any angle without length calculations. It features pivoting and tilting saw units to cut high, wide, and compound mitre profiles. Safety hoods and standard saw blades are included. Cutting lengths include 4,500mm, 6,000mm, and 7,500mm. Optional equipment includes a steel machine bed, hydro-pneumatic saw feed, profile lifting bars, additional software, workpiece supports, material clamps, stops, label printer, exhaust system, and roller conveyor. Controller options are a positioning control E390 or PC control E580. Specifications include a 550mm saw
This document provides a technical sheet for the DG244 double mitre saw. The saw allows for cutting of profiles at any angle without length calculations. It features pivoting and tilting saw units to cut high, wide, and compound mitre profiles. Safety hoods and standard saw blades are included. Cutting lengths include 4,500mm, 6,000mm, and 7,500mm. Optional equipment includes a steel machine bed, hydro-pneumatic saw feed, profile lifting bars, additional software, workpiece supports, material clamps, stops, label printer, exhaust system, and roller conveyor. Controller options are a positioning control E390 or PC control E580. Specifications include a 550mm saw
This document provides a technical sheet for the DG244 double mitre saw. The saw allows for cutting of profiles at any angle without length calculations. It features pivoting and tilting saw units to cut high, wide, and compound mitre profiles. Safety hoods and standard saw blades are included. Cutting lengths include 4,500mm, 6,000mm, and 7,500mm. Optional equipment includes a steel machine bed, hydro-pneumatic saw feed, profile lifting bars, additional software, workpiece supports, material clamps, stops, label printer, exhaust system, and roller conveyor. Controller options are a positioning control E390 or PC control E580. Specifications include a 550mm saw
This document provides a technical sheet for the DG244 double mitre saw. The saw allows for cutting of profiles at any angle without length calculations. It features pivoting and tilting saw units to cut high, wide, and compound mitre profiles. Safety hoods and standard saw blades are included. Cutting lengths include 4,500mm, 6,000mm, and 7,500mm. Optional equipment includes a steel machine bed, hydro-pneumatic saw feed, profile lifting bars, additional software, workpiece supports, material clamps, stops, label printer, exhaust system, and roller conveyor. Controller options are a positioning control E390 or PC control E580. Specifications include a 550mm saw
The reliable elumatec principle “Cutting from below”:
Provides unhindered access to support table A large saw blade diameter and optimal use of the saw blade offer an ideal cutting capacity for all cutting variations Standard for elumatec: external dimension cuts at all angle positions. This means no length calculations are necessary when cutting profiles of different heights. This is a big advantage when cutting special angles The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre cut. Consequently, many profiles can be cut without support blocks Safety hoods Equipped with saw blades as standard Pulsed coolant system
Cutting length variants
4,500 mm 6,000 mm 7,500 mm
Options DG 244 M machine bed made of steel sheet (only for cutting length 4,500 mm and 6,000 mm) Hydro-pneumatic saw feed Saw feed – minimum cutting length 400 mm Profile lifting bars Additional software for E 580: optimisation program, software module for chop and oversize length cuts Mobile or automatically retractable workpiece supports Material clamping units Transom stop and lead-cut stop Label printer Exhaust connectors, extraction system Clock system Roller conveyor Saw blades High performance cutting fluid
Controller variants
elumatec AG Tel +49 7041-14 0 The right to make technical alterations is
Minimum cutting length tilted at 45° 375 mm Pivoting range inwards, pneumatically, 90° - 45° (manually up to 22.5° inwards and up to 140° outwards with digital display) Tilting range inwards, pneumatically, 90° - 45° (intermediate angles manually adjustable with digital read-out display and turret stop) For cutting range, see cutting diagram Saw blade diameter 550 mm Saw blade speed 2,250 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying
elumatec AG Tel +49 7041-14 0 The right to make technical alterations is
Purchase and Download Active Nigerian Mobile Phone and GSM Number Database List From All The 36 States of Nigeria and Their Local Government For Marketing To Targeted Audience
