FEUILLES DES DONNEES DES INSTRUMENTS

EX-CO 00 03/08/2023 For Construction ALO ALO ITR

EX-DE 02 02/08/2023 For Approval ALO ALO ITR
EX-DE 01 31/07/2023 For Approval ALO ALO ITR
EX-DE 00 07/07/2023 For Approval ALO ALO ITR
Validity Revision
Status Number Contractor Company
Date Description Prepared Checked Approved
Approval Approval
Revision index
Company logo and business name Project name Company Document ID
REALISATION EN EPC
D'UNE NOUVELLE UNITE 140107DIEH00192
D'AIR INSTRUMENT AU
NIVEAU DU CHAMP BRN Job N.
(TRAIN 1&2)
Contractor logo and business name Contractor identification

Contractor N S22E103331-103332
Vendor logo and business name Vendor identification

Order N
Facility and Sub Facility Name: Location: Algeria Scale Sheet of Sheets

n.a. 1/23
Document Title Supersedes N.

Superseded by N.
Plant area Plant unit
n.a. n.a.
Software: Microsoft Excel

This document is property of GSE –It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent. 1 / 23
 Sheet of Sheets
Company Document ID
2/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

REVISION LIST

00 For Approval
01 For Approval
02 For Approval
00 For Construction

This document is property of GSE –It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent. 2 / 23
 Sheet of Sheets
Company Document ID
3/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

DOCUMENTS DE REFERENCE

REFERENCE DESIGNATION
140107DPFM00042 P&ID Nouvellle Unité d'Air Instrument

This document is property of GSE –It shall neither be shown to Third Parties nor used for purposes other than those for which it has been sent. 3 / 23
 Sheet of Sheets
Company Document ID
4/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PG DATA SHEET (490-PG-301)

1 Tag Number 490-PG-301
2 Service WET AIR
GENERAL 3 P & ID No. 140107DPFM00042
4 Equipment / Line No. 490-VA-301
5 NACE Compliance Ingress Protection Not Required IP 65 as minimum
6 Fluid State AIR GAS
7 Oper.Press Max. Norm. Min. 10 8,47 3,5 bar-g
PROCESS
8 Oper.Temp. Max. Norm. Min. 60 -5 °C
CONDITIONS
9 Design Press. Max. Min. 10 bar-g
10 Design Temp. Max. Min. 90 -5 °C
11 Instrument Range Min Max bar-g
12 Element Type Material Bourdon Tube 316 SS
13 Mounting Direct
14 Dial Size 150mm
15 Dial Color White with Black Numerals
16 Case Material SS316
17 Ring Construction Ring Material bayonnet lock-type or screw bezel SS316
18 Blow-Out Protection Required-Rear
19 Window Material Safety pattern shatterproof glass
GAUGE
20 Accuracy ±1.0% of full scale
21 Zero Adjustment Screw Required
22 Overrange Protection 130% of Range
23 Socket Material SS316
24 Movement Material SS316
25 Instrument Connection Size 1/2” NPT-M
26 Connection Location Side
27 Enclosure Protection Weather Proof
28
40 Syphon Material Size N/A N/A
41 Snubber: Size Material N/A N/A
42 Gauge Saver Material Size N/A N/A
43 Pulsation Dampner(Integral) Size N/A N/A
OPTIONS
44 Case Filling Fill Fluid Required Silicone Oil
45 Accessories Multiport gauge valve 3/4" NPT-M x 1/2" NPT-F
46 Requirement of Solid Front Required
47 Remarks SEE Notes
48 Manufacturer VTA
49 Model VTA
PURCHASE 50 Serial Number VTA
52 Purchase Order No. TBC
53 Item No. TBC

NOTES

1) VTA : Vendor To Advice, TBC: To be Completed (Later), N/A : Non Applicable

2) The pointers must have arrestors to prevent damage from overpressure.
3) The dial shall indicate the tag number and the pressure element material.
The movement shall be mounted on the socket and shall be independent from the case. Pointers shall have external
4)
micrometer allowing calibration adjustment and zeroing without removing the pointer from the shaft.
Vendor shall offer suitable grade for silicone oil based on minimum & maximum temperature mentioned in datasheet.
5)
Otherwise, vendor shall offer alternate suitable fluid.
6) Accuracy is inclusive of Linearity, hysteresis & repeatability.
Accuracy is to be maintained after momentary overpressure and cycling up to 1.3 times the maximum full-scale
7)
pressure.
8) Pressure gauges shall be provided with a permanently attached (with drive pins or equal) stainless steel tags
 Sheet of Sheets
Company Document ID
5/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PG DATA SHEET (490-PG-302)

1 Tag Number 490-PG-302
2 Service DRY AIR
GENERAL 3 P & ID No. 140107DPFM00042
4 Equipment / Line No. 490-VA-302
5 NACE Compliance Ingress Protection Not Required IP 65 as minimum
6 Fluid State AIR GAS
7 Oper.Press Max. Norm. Min. 10 7,37 3,5 bar-g
PROCESS
8 Oper.Temp. Max. Norm. Min. 60 -5 °C
CONDITIONS
9 Design Press. Max. Min. 10 bar-g
10 Design Temp. Max. Min. 90 -5 °C
11 Instrument Range Min Max bar-g
12 Element Type Material Bourdon Tube 316 SS
13 Mounting Direct
14 Dial Size 150mm
15 Dial Color White with Black Numerals
16 Case Material SS316
17 Ring Construction Ring Material bayonnet lock-type or screw bezel SS316
18 Blow-Out Protection Required-Rear
19 Window Material Safety pattern shatterproof glass
GAUGE
20 Accuracy ±1.0% of full scale
21 Zero Adjustment Screw Required
22 Overrange Protection 130% of Range
23 Socket Material SS316
24 Movement Material SS316
25 Instrument Connection Size 1/2” NPT-M
26 Connection Location Side
27 Enclosure Protection Weather Proof
28
40 Syphon Material Size N/A N/A
41 Snubber: Size Material N/A N/A
42 Gauge Saver Material Size N/A N/A
43 Pulsation Dampner(Integral) Size N/A N/A
OPTIONS
44 Case Filling Fill Fluid Required Silicone Oil
45 Accessories Multiport gauge valve 3/4" NPT-M x 1/2" NPT-F
46 Requirement of Solid Front Required
47 Remarks SEE Notes
48 Manufacturer VTA
49 Model VTA
PURCHASE 50 Serial Number VTA
52 Purchase Order No. TBC
53 Item No. TBC

NOTES

1) VTA : Vendor To Advice, TBC: To be Completed (Later), N/A : Non Applicable

2) The pointers must have arrestors to prevent damage from overpressure.
3) The dial shall indicate the tag number and the pressure element material.
The movement shall be mounted on the socket and shall be independent from the case. Pointers shall have external
4)
micrometer allowing calibration adjustment and zeroing without removing the pointer from the shaft.
Vendor shall offer suitable grade for silicone oil based on minimum & maximum temperature mentioned in datasheet.
5)
Otherwise, vendor shall offer alternate suitable fluid.
6) Accuracy is inclusive of Linearity, hysteresis & repeatability.
Accuracy is to be maintained after momentary overpressure and cycling up to 1.3 times the maximum full-scale
7)
pressure.
8) Pressure gauges shall be provided with a permanently attached (with drive pins or equal) stainless steel tags
 Sheet of Sheets
Company Document ID
6/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PG DATA SHEET (490-PG-303)

1 Tag Number 490-PG-303
2 Service DRY AIR
GENERAL 3 P & ID No. 140107DPFM00042
4 Equipment / Line No. 490-VA-303
5 NACE Compliance Ingress Protection Not Required IP 65 as minimum
6 Fluid State AIR GAS
7 Oper.Press Max. Norm. Min. 10 7,27 3,5 bar-g
PROCESS
8 Oper.Temp. Max. Norm. Min. 60 -5 °C
CONDITIONS
9 Design Press. Max. Min. 10 bar-g
10 Design Temp. Max. Min. 90 -5 °C
11 Instrument Range Min Max bar-g
12 Element Type Material Bourdon Tube 316 SS
13 Mounting Direct
14 Dial Size 150mm
15 Dial Color White with Black Numerals
16 Case Material SS316
17 Ring Construction Ring Material bayonnet lock-type or screw bezel SS316
18 Blow-Out Protection Required-Rear
19 Window Material Safety pattern shatterproof glass
GAUGE
20 Accuracy ±1.0% of full scale
21 Zero Adjustment Screw Required
22 Overrange Protection 130% of Range
23 Socket Material SS316
24 Movement Material SS316
25 Instrument Connection Size 1/2” NPT-M
26 Connection Location Side
27 Enclosure Protection Weather Proof
28
40 Syphon Material Size N/A N/A
41 Snubber: Size Material N/A N/A
42 Gauge Saver Material Size N/A N/A
43 Pulsation Dampner(Integral) Size N/A N/A
OPTIONS
44 Case Filling Fill Fluid Required Silicone Oil
45 Accessories Multiport gauge valve 3/4" NPT-M x 1/2" NPT-F
46 Requirement of Solid Front Required
47 Remarks SEE Notes
48 Manufacturer VTA
49 Model VTA
PURCHASE 50 Serial Number VTA
52 Purchase Order No. TBC
53 Item No. TBC

NOTES

1) VTA : Vendor To Advice, TBC: To be Completed (Later), N/A : Non Applicable

2) The pointers must have arrestors to prevent damage from overpressure.
3) The dial shall indicate the tag number and the pressure element material.
The movement shall be mounted on the socket and shall be independent from the case. Pointers shall have external
4)
micrometer allowing calibration adjustment and zeroing without removing the pointer from the shaft.
Vendor shall offer suitable grade for silicone oil based on minimum & maximum temperature mentioned in datasheet.
5)
Otherwise, vendor shall offer alternate suitable fluid.
6) Accuracy is inclusive of Linearity, hysteresis & repeatability.
Accuracy is to be maintained after momentary overpressure and cycling up to 1.3 times the maximum full-scale
7)
pressure.
8) Pressure gauges shall be provided with a permanently attached (with drive pins or equal) stainless steel tags
 Sheet of Sheets
Company Document ID
7/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PG DATA SHEET (490-PG-304)

1 Tag Number 490-PG-304
2 Service DRY AIR
GENERAL 3 P & ID No. 140107DPFM00042
4 Equipment / Line No. 490-VA-304
5 NACE Compliance Ingress Protection Not Required IP 65 as minimum
6 Fluid State AIR GAS
7 Oper.Press Max. Norm. Min. 10 6,91 3,5 bar-g
PROCESS
8 Oper.Temp. Max. Norm. Min. 60 -5 °C
CONDITIONS
9 Design Press. Max. Min. 10 bar-g
10 Design Temp. Max. Min. 90 -5 °C
11 Instrument Range Min Max bar-g
12 Element Type Material Bourdon Tube 316 SS
13 Mounting Direct
14 Dial Size 150mm
15 Dial Color White with Black Numerals
16 Case Material SS316
17 Ring Construction Ring Material bayonnet lock-type or screw bezel SS316
18 Blow-Out Protection Required-Rear
19 Window Material Safety pattern shatterproof glass
GAUGE
20 Accuracy ±1.0% of full scale
21 Zero Adjustment Screw Required
22 Overrange Protection 130% of Range
23 Socket Material SS316
24 Movement Material SS316
25 Instrument Connection Size 1/2” NPT-M
26 Connection Location Side
27 Enclosure Protection Weather Proof
28
40 Syphon Material Size N/A N/A
41 Snubber: Size Material N/A N/A
42 Gauge Saver Material Size N/A N/A
43 Pulsation Dampner(Integral) Size N/A N/A
OPTIONS
44 Case Filling Fill Fluid Required Silicone Oil
45 Accessories Multiport gauge valve 3/4" NPT-M x 1/2" NPT-F
46 Requirement of Solid Front Required
47 Remarks SEE Notes
48 Manufacturer VTA
49 Model VTA
PURCHASE 50 Serial Number VTA
52 Purchase Order No. TBC
53 Item No. TBC

NOTES

1) VTA : Vendor To Advice, TBC: To be Completed (Later), N/A : Non Applicable

2) The pointers must have arrestors to prevent damage from overpressure.
3) The dial shall indicate the tag number and the pressure element material.
The movement shall be mounted on the socket and shall be independent from the case. Pointers shall have external
4)
micrometer allowing calibration adjustment and zeroing without removing the pointer from the shaft.
Vendor shall offer suitable grade for silicone oil based on minimum & maximum temperature mentioned in datasheet.
5)
Otherwise, vendor shall offer alternate suitable fluid.
6) Accuracy is inclusive of Linearity, hysteresis & repeatability.
Accuracy is to be maintained after momentary overpressure and cycling up to 1.3 times the maximum full-scale
7)
pressure.
8) Pressure gauges shall be provided with a permanently attached (with drive pins or equal) stainless steel tags
 Sheet of Sheets
Company Document ID
8/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PG DATA SHEET (490-PG-305)

1 Tag Number 490-PG-305
2 Service DRY AIR
GENERAL 3 P & ID No. 140107DPFM00042
4 Equipment / Line No. 6"-49-IA-002-13D-G
5 NACE Compliance Ingress Protection Not Required IP 65 as minimum
6 Fluid State AIR GAS
7 Oper.Press Max. Norm. Min. 10 7,41 3,5 bar-g
PROCESS
8 Oper.Temp. Max. Norm. Min. 60 -5 °C
CONDITIONS
9 Design Press. Max. Min. 10 bar-g
10 Design Temp. Max. Min. 90 -5 °C
11 Instrument Range Min Max bar-g
12 Element Type Material Bourdon Tube 316 SS
13 Mounting Direct
14 Dial Size 150mm
15 Dial Color White with Black Numerals
16 Case Material SS316
17 Ring Construction Ring Material bayonnet lock-type or screw bezel SS316
18 Blow-Out Protection Required-Rear
19 Window Material Safety pattern shatterproof glass
GAUGE
20 Accuracy ±1.0% of full scale
21 Zero Adjustment Screw Required
22 Overrange Protection 130% of Range
23 Socket Material SS316
24 Movement Material SS316
25 Instrument Connection Size 1/2” NPT-M
26 Connection Location Bottom
27 Enclosure Protection Weather Proof
28
40 Syphon Material Size N/A N/A
41 Snubber: Size Material N/A N/A
42 Gauge Saver Material Size N/A N/A
43 Pulsation Dampner(Integral) Size N/A N/A
OPTIONS
44 Case Filling Fill Fluid Required Silicone Oil
45 Accessories Multiport gauge valve 3/4" NPT-M x 1/2" NPT-F
46 Requirement of Solid Front Required
47 Remarks SEE Notes
48 Manufacturer VTA
49 Model VTA
PURCHASE 50 Serial Number VTA
52 Purchase Order No. TBC
53 Item No. TBC

NOTES

1) VTA : Vendor To Advice, TBC: To be Completed (Later), N/A : Non Applicable

2) The pointers must have arrestors to prevent damage from overpressure.
3) The dial shall indicate the tag number and the pressure element material.
The movement shall be mounted on the socket and shall be independent from the case. Pointers shall have external
4)
micrometer allowing calibration adjustment and zeroing without removing the pointer from the shaft.
Vendor shall offer suitable grade for silicone oil based on minimum & maximum temperature mentioned in datasheet.
5)
Otherwise, vendor shall offer alternate suitable fluid.
6) Accuracy is inclusive of Linearity, hysteresis & repeatability.
Accuracy is to be maintained after momentary overpressure and cycling up to 1.3 times the maximum full-scale
7)
pressure.
8) Pressure gauges shall be provided with a permanently attached (with drive pins or equal) stainless steel tags
 Sheet of Sheets
Company Document ID
9/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PT DATA SHEET (490-PT-301)

1 TAG NUMBER 490-PT-301
2 SERVICE WET AIR
3 P&ID NUMBER 140107DPFM00042
GENERAL

4 LINE N° / EQUIPEMENT N° 6"-49-UA-008-13D-G

5 RELATIVE HUMIDITY (RH %) 0% to 95%
6 AMBIENT TEMPERATURE -5 / 60 °C
HAZARDOUS AREA
7 SAFE AREA
CLASSIFICATION
8 FLUIDE WET & DRY COMPRESSED AIR (SEE SERVICE)
PROCESS

9 OPERATING / DESIGN PRESSURE 8,46 / 10 barg

OPERATING / DESIGN
10 60 / 90 °C
TEMPERATURE
11 MANUFACTURER TBA
12 MODEL NUMBER TBA
13 RANGE 0 - 100
14 OVERRANGE 30%
15 BODY MATERIAL 316 L
16 WETTED PART MATERIAL 316 L
17 PROCESS CONNECTION AND SIZE 1/2" NPT-M
TRANSMITTER

18 OUTPUT SIGNAL 4 - 20 mA
19 SMART PROTOCOL HART
20 INDICATOR Required
21 INDICATOR SCALE AS CALIBRATED RANGE
22 POWER SUPPLY 24 V DC LOOP POWERED
CABLE GLAND / MATERIAL /
23
CERTIFICATION
24 INGRESS PROTECTION IP 65
25 ELECTRICAL PROTECTION
26 ACCURACY +/- 0,15 % OF SPAN
27 MOUNTING DIRECT
28 MANUFACTURER TBA
29 MODEL NUMBER TBA
30 SUPPLIER SPECIFICATION CODES VTA
MAINFOLD

31 TYPE 2 VALVES 3 WAYS

32 VALVES CONFIGURATION IN, OUT, DRAIN
33 BODY MATERIAL 316L SS
34 WETTED PART MATERIAL 316L SS
1/2" NPT-F (INSTRUMENT) × 3/4" NPTM (PROCESS) × 1/2" NPT-F
35 CONNECTIONS
(DRAIN)

1- All items to be supplied with SS name plate showing tag N°. The name plate to be fixed by SS wire.
2- Cable Glands shall be supplied with instruments
3- SUPPLIER shall complete in all parts the data sheet.
4- Display Units shall be barg
5- Cable entry blanking plugs to be provided with transmiter for spare entries.
6- Vendor to provide following documents as minimum:
NOTES

a) Material certification
b) Calibration certification (Min 5 points)
ABBREVIATIONS:
• N/A: Not applicable
• MFR STD: Manufacturer Standard
• VTA: Vendor To Advise
• TBA: To Be Advised
 Sheet of Sheets
Company Document ID
10/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PT DATA SHEET (490-PT-302)

1 TAG NUMBER 490-PT-302
2 SERVICE DRY AIR
3 P&ID NUMBER 140107DPFM00042
GENERAL

4 LINE N° / EQUIPEMENT N° 6"-49-IA-002-13D-G

5 RELATIVE HUMIDITY (RH %) 0% to 95%
6 AMBIENT TEMPERATURE -5 / 60 °C
HAZARDOUS AREA
7 SAFE AREA
CLASSIFICATION
8 FLUIDE WET & DRY COMPRESSED AIR (SEE SERVICE)
PROCESS

9 OPERATING / DESIGN PRESSURE 7,41 / 10 barg

OPERATING / DESIGN
10 60 / 90 °C
TEMPERATURE
11 MANUFACTURER TBA
12 MODEL NUMBER TBA
13 RANGE 0 - 100
14 OVERRANGE 30%
15 BODY MATERIAL 316 L
16 WETTED PART MATERIAL 316 L
17 PROCESS CONNECTION AND SIZE 1/2" NPT-M
TRANSMITTER

18 OUTPUT SIGNAL 4 - 20 mA
19 SMART PROTOCOL HART
20 INDICATOR Required
21 INDICATOR SCALE AS CALIBRATED RANGE
22 POWER SUPPLY 24 V DC LOOP POWERED
CABLE GLAND / MATERIAL /
23
CERTIFICATION
24 INGRESS PROTECTION IP 65
25 ELECTRICAL PROTECTION
26 ACCURACY +/- 0,15 % OF SPAN
27 MOUNTING DIRECT
28 MANUFACTURER TBA
29 MODEL NUMBER TBA
30 SUPPLIER SPECIFICATION CODES VTA
MAINFOLD

31 TYPE 2 VALVES 3 WAYS

32 VALVES CONFIGURATION IN, OUT, DRAIN
33 BODY MATERIAL 316L SS
34 WETTED PART MATERIAL 316L SS
1/2" NPT-F (INSTRUMENT) × 3/4" NPTM (PROCESS) × 1/2" NPT-F
35 CONNECTIONS
(DRAIN)

1- All items to be supplied with SS name plate showing tag N°. The name plate to be fixed by SS wire.
2- Cable Glands shall be supplied with instruments
3- SUPPLIER shall complete in all parts the data sheet.
4- Display Units shall be barg
5- Cable entry blanking plugs to be provided with transmiter for spare entries.
6- Vendor to provide following documents as minimum:
NOTES

a) Material certification
b) Calibration certification (Min 5 points)
ABBREVIATIONS:
• N/A: Not applicable
• MFR STD: Manufacturer Standard
• VTA: Vendor To Advise
• TBA: To Be Advised
 Sheet of Sheets
Company Document ID
11/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PT DATA SHEET (490-PT-303)

1 TAG NUMBER 490-PT-303
2 SERVICE DRY AIR
3 P&ID NUMBER 140107DPFM00042
GENERAL

4 LINE N° / EQUIPEMENT N° 6"-49-IA-002-13D-G

5 RELATIVE HUMIDITY (RH %) 0% to 95%
6 AMBIENT TEMPERATURE -5 / 60 °C
HAZARDOUS AREA
7 SAFE AREA
CLASSIFICATION
8 FLUIDE WET & DRY COMPRESSED AIR (SEE SERVICE)
PROCESS

9 OPERATING / DESIGN PRESSURE 7,41 / 10 barg

OPERATING / DESIGN
10 60 / 90 °C
TEMPERATURE
11 MANUFACTURER TBA
12 MODEL NUMBER TBA
13 RANGE 0 - 100
14 OVERRANGE 30%
15 BODY MATERIAL 316 L
16 WETTED PART MATERIAL 316 L
17 PROCESS CONNECTION AND SIZE 1/2" NPT-M
TRANSMITTER

18 OUTPUT SIGNAL 4 - 20 mA
19 SMART PROTOCOL HART
20 INDICATOR Required
21 INDICATOR SCALE AS CALIBRATED RANGE
22 POWER SUPPLY 24 V DC LOOP POWERED
CABLE GLAND / MATERIAL /
23
CERTIFICATION
24 INGRESS PROTECTION IP 65
25 ELECTRICAL PROTECTION
26 ACCURACY +/- 0,15 % OF SPAN
27 MOUNTING DIRECT
28 MANUFACTURER TBA
29 MODEL NUMBER TBA
30 SUPPLIER SPECIFICATION CODES VTA
MAINFOLD

31 TYPE 2 VALVES 3 WAYS

32 VALVES CONFIGURATION IN, OUT, DRAIN
33 BODY MATERIAL 316L SS
34 WETTED PART MATERIAL 316L SS
1/2" NPT-F (INSTRUMENT) × 3/4" NPTM (PROCESS) × 1/2" NPT-F
35 CONNECTIONS
(DRAIN)

1- All items to be supplied with SS name plate showing tag N°. The name plate to be fixed by SS wire.
2- Cable Glands shall be supplied with instruments
3- SUPPLIER shall complete in all parts the data sheet.
4- Display Units shall be barg
5- Cable entry blanking plugs to be provided with transmiter for spare entries.
6- Vendor to provide following documents as minimum:
NOTES

a) Material certification
b) Calibration certification (Min 5 points)
ABBREVIATIONS:
• N/A: Not applicable
• MFR STD: Manufacturer Standard
• VTA: Vendor To Advise
• TBA: To Be Advised
 Sheet of Sheets
Company Document ID
12/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

LG DATA SHEET (490-LG-301)

1 TAG NUMBER 490-LG-301
2 P&ID. NO 140107DPFM00042
IDENTIFICATION

3 SERVICE WET AIR

4 VESSEL CAPACITY m3 490-VA-301: 80 m3
5 MANUFACTURER TBA
6 MODEL NUMBER VTA
7 AREA SAFE AREA
8 HAZARDOUS AREA CLASSIFICATION ---
9 FLUID WATER
10 DENSITY Kg/m3 1000
11 SERVICE MIN NORM MAX
PROCESS

12 DESIGN PRESSURE bar g 10

13 DESIGN TEMPERATURE °C -5 90
14 OPERATING PRESSURE bar g 3,5 8,47 10
15 OPERATING TEMPERATURE °C 60
16 TANK LENGTH (T/T) mm 9000
17 INTERNAL DIAMETRE mm 3200
18 TYPE MAGNETIC
19 VISIBLE LENGTH C to C DIMENSION VTA 750
20 CONNECTION SIZE TYPE LOC. 2" RF #150 SIDE/SIDE
21 BODY MATERIAL 316 SS
22 INDICATOR MATERIAL MFR STD (NOTE 4)
S.W. SS316+F.GRA INNER RING SS316, OUTER RING
23 GASKET MATERIAL
C.S.
GAUGE

24 FLOAT MATERIAL 316L SS

25 SHIELD -
26 ILLUMINATOR POWER SUPPLY NO NO
27 JACKET OR INTERNAL TRACER -
28 FROST EXTENSION LENGTH - -
29 CALIBRATION RANGE MAX. - -
A193 Gr. B7M, A194 Gr. 2HM, ASME, Stud, Hex Nut
30 BOLTS AND NUTS MATERIAL
Heavy, Zinc plated bichromate
31 TYPE BALL
32 NUMBER REQUIRED 2 (FOR DRAIN & VENT CONNECTION)
33 BODY MATERIAL 316 SS
34 TRIM MATERIAL 316 SS
35 PACKING MATERIAL TEFLON
36 BALL CHECK -
VALVES

37 VESSEL SIZE RATING - -

38 CONNECTION UNION -
39 SIZE RATING - -
GAUGE CONNECTION
40 UNION -
3/4" (BALL VALVE + ASME B16.5 CLASS #800
41 DRAIN CONNECTION SIZE RATING
PLUG) RF
3/4" (BALL VALVE + ASME B16.5 CLASS #800
42 VENT CONNECTION SIZE RATING
PLUG) RF
43 INSTRUMENT CERTIFICATION YES (SEE NOTE 4)
AREA

44 INGRESS PROTECTION IP 65
45 ACCESSORIES REQUIRED ACCESSORIES
Tropicalized Yes Ambient Temperature °C min -5 °C max 90
Electrical Connection No Operating humidity limits min 0% max 90%
NOTES:
1. VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
2. TBA INDICATES TO BE ADVISED BY PURCHASER
3. RED AND WHITE FLAP INDICATOR SHALL BE PROVIDED
4. CERTIFICATIONS:
- Material certificates
- Ingress Protection certificates
- Calibration certificates
 Sheet of Sheets
Company Document ID
13/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

LG DATA SHEET (490-LG-302)

1 TAG NUMBER 490-LG-302
2 P&ID. NO 140107DPFM00042
IDENTIFICATION

3 SERVICE DRY AIR

4 VESSEL CAPACITY m3 490-VA-302: 80 m3
5 MANUFACTURER TBA
6 MODEL NUMBER VTA
7 AREA SAFE AREA
8 HAZARDOUS AREA CLASSIFICATION ---
9 FLUID WATER
10 DENSITY Kg/m3 1000
11 SERVICE MIN NORM MAX
PROCESS

12 DESIGN PRESSURE bar g 10

13 DESIGN TEMPERATURE °C -5 90
14 OPERATING PRESSURE bar g 3,5 7,37 10
15 OPERATING TEMPERATURE °C 60
16 TANK LENGTH (T/T) mm 9000
17 INTERNAL DIAMETRE mm 3200
18 TYPE MAGNETIC
19 VISIBLE LENGTH C to C DIMENSION VTA 750
20 CONNECTION SIZE TYPE LOC. 2" RF #150 SIDE/SIDE
21 BODY MATERIAL 316 SS
22 INDICATOR MATERIAL MFR STD (NOTE 4)
S.W. SS316+F.GRA INNER RING SS316, OUTER RING
23 GASKET MATERIAL
C.S.
GAUGE

24 FLOAT MATERIAL 316L SS

25 SHIELD -
26 ILLUMINATOR POWER SUPPLY NO NO
27 JACKET OR INTERNAL TRACER -
28 FROST EXTENSION LENGTH - -
29 CALIBRATION RANGE MAX. - -
A193 Gr. B7M, A194 Gr. 2HM, ASME, Stud, Hex Nut
30 BOLTS AND NUTS MATERIAL
Heavy, Zinc plated bichromate
31 TYPE BALL
32 NUMBER REQUIRED 2 (FOR DRAIN & VENT CONNECTION)
33 BODY MATERIAL 316 SS
34 TRIM MATERIAL 316 SS
35 PACKING MATERIAL TEFLON
36 BALL CHECK -
VALVES

37 VESSEL SIZE RATING - -

38 CONNECTION UNION -
39 SIZE RATING - -
GAUGE CONNECTION
40 UNION -
3/4" (BALL VALVE + ASME B16.5 CLASS #800
41 DRAIN CONNECTION SIZE RATING
PLUG) RF
3/4" (BALL VALVE + ASME B16.5 CLASS #800
42 VENT CONNECTION SIZE RATING
PLUG) RF
43 INSTRUMENT CERTIFICATION YES (SEE NOTE 4)
AREA

44 INGRESS PROTECTION IP 65
45 ACCESSORIES REQUIRED ACCESSORIES
Tropicalized Yes Ambient Temperature °C min -5 °C max 90
Electrical Connection No Operating humidity limits min 0% max 90%
NOTES:
1. VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
2. TBA INDICATES TO BE ADVISED BY PURCHASER
3. RED AND WHITE FLAP INDICATOR SHALL BE PROVIDED
4. CERTIFICATIONS:
- Material certificates
- Ingress Protection certificates
- Calibration certificates
 Sheet of Sheets
Company Document ID
14/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

LG DATA SHEET (490-LG-303)

1 TAG NUMBER 490-LG-303
2 P&ID. NO 140107DPFM00042
IDENTIFICATION

3 SERVICE DRY AIR

4 VESSEL CAPACITY m3 490-VA-303: 40 m3
5 MANUFACTURER TBA
6 MODEL NUMBER VTA
7 AREA SAFE AREA
8 HAZARDOUS AREA CLASSIFICATION ---
9 FLUID WATER
10 DENSITY Kg/m3 1000
11 SERVICE MIN NORM MAX
PROCESS

12 DESIGN PRESSURE bar g 10

13 DESIGN TEMPERATURE °C -5 90
14 OPERATING PRESSURE bar g 3,5 7,27 10
15 OPERATING TEMPERATURE °C 60
16 TANK LENGTH (T/T) mm 7700
17 INTERNAL DIAMETRE mm 2450
18 TYPE MAGNETIC
19 VISIBLE LENGTH C to C DIMENSION VTA 750
20 CONNECTION SIZE TYPE LOC. 2" RF #150 SIDE/SIDE
21 BODY MATERIAL 316 SS
22 INDICATOR MATERIAL MFR STD (NOTE 4)
S.W. SS316+F.GRA INNER RING SS316, OUTER RING
23 GASKET MATERIAL
C.S.
GAUGE

24 FLOAT MATERIAL 316L SS

25 SHIELD -
26 ILLUMINATOR POWER SUPPLY NO NO
27 JACKET OR INTERNAL TRACER -
28 FROST EXTENSION LENGTH - -
29 CALIBRATION RANGE MAX. - -
A193 Gr. B7M, A194 Gr. 2HM, ASME, Stud, Hex Nut
30 BOLTS AND NUTS MATERIAL
Heavy, Zinc plated bichromate
31 TYPE BALL
32 NUMBER REQUIRED 2 (FOR DRAIN & VENT CONNECTION)
33 BODY MATERIAL 316 SS
34 TRIM MATERIAL 316 SS
35 PACKING MATERIAL TEFLON
36 BALL CHECK -
VALVES

37 VESSEL SIZE RATING - -

38 CONNECTION UNION -
39 SIZE RATING - -
GAUGE CONNECTION
40 UNION -
3/4" (BALL VALVE + ASME B16.5 CLASS #800
41 DRAIN CONNECTION SIZE RATING
PLUG) RF
3/4" (BALL VALVE + ASME B16.5 CLASS #800
42 VENT CONNECTION SIZE RATING
PLUG) RF
43 INSTRUMENT CERTIFICATION YES (SEE NOTE 4)
AREA

44 INGRESS PROTECTION IP 65
45 ACCESSORIES REQUIRED ACCESSORIES
Tropicalized Yes Ambient Temperature °C min -5 °C max 90
Electrical Connection No Operating humidity limits min 0% max 90%
NOTES:
1. VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
2. TBA INDICATES TO BE ADVISED BY PURCHASER
3. RED AND WHITE FLAP INDICATOR SHALL BE PROVIDED
4. CERTIFICATIONS:
- Material certificates
- Ingress Protection certificates
- Calibration certificates
 Sheet of Sheets
Company Document ID
15/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

LG DATA SHEET (490-LG-304)

1 TAG NUMBER 490-LG-304
2 P&ID. NO 140107DPFM00042
IDENTIFICATION

3 SERVICE DRY AIR

4 VESSEL CAPACITY m3 490-VA-304: 40 m3
5 MANUFACTURER TBA
6 MODEL NUMBER VTA
7 AREA SAFE AREA
8 HAZARDOUS AREA CLASSIFICATION ---
9 FLUID WATER
10 DENSITY Kg/m3 1000
11 SERVICE MIN NORM MAX
PROCESS

12 DESIGN PRESSURE bar g 10

13 DESIGN TEMPERATURE °C -5 90
14 OPERATING PRESSURE bar g 3,5 6,91 10
15 OPERATING TEMPERATURE °C 60
16 TANK LENGTH (T/T) mm 7700
17 INTERNAL DIAMETRE mm 2450
18 TYPE MAGNETIC
19 VISIBLE LENGTH C to C DIMENSION VTA 750
20 CONNECTION SIZE TYPE LOC. 2" RF #150 SIDE/SIDE
21 BODY MATERIAL 316 SS
22 INDICATOR MATERIAL MFR STD (NOTE 4)
S.W. SS316+F.GRA INNER RING SS316, OUTER RING
23 GASKET MATERIAL
C.S.
GAUGE

24 FLOAT MATERIAL 316L SS

25 SHIELD -
26 ILLUMINATOR POWER SUPPLY NO NO
27 JACKET OR INTERNAL TRACER -
28 FROST EXTENSION LENGTH - -
29 CALIBRATION RANGE MAX. - -
A193 Gr. B7M, A194 Gr. 2HM, ASME, Stud, Hex Nut
30 BOLTS AND NUTS MATERIAL
Heavy, Zinc plated bichromate
31 TYPE BALL
32 NUMBER REQUIRED 2 (FOR DRAIN & VENT CONNECTION)
33 BODY MATERIAL 316 SS
34 TRIM MATERIAL 316 SS
35 PACKING MATERIAL TEFLON
36 BALL CHECK -
VALVES

37 VESSEL SIZE RATING - -

38 CONNECTION UNION -
39 SIZE RATING - -
GAUGE CONNECTION
40 UNION -
3/4" (BALL VALVE + ASME B16.5 CLASS #800
41 DRAIN CONNECTION SIZE RATING
PLUG) RF
3/4" (BALL VALVE + ASME B16.5 CLASS #800
42 VENT CONNECTION SIZE RATING
PLUG) RF
43 INSTRUMENT CERTIFICATION YES (SEE NOTE 4)
AREA

44 INGRESS PROTECTION IP 65
45 ACCESSORIES REQUIRED ACCESSORIES
Tropicalized Yes Ambient Temperature °C min -5 °C max 90
Electrical Connection No Operating humidity limits min 0% max 90%
NOTES:
1. VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
2. TBA INDICATES TO BE ADVISED BY PURCHASER
3. RED AND WHITE FLAP INDICATOR SHALL BE PROVIDED
4. CERTIFICATIONS:
- Material certificates
- Ingress Protection certificates
- Calibration certificates
 Sheet of Sheets
Company Document ID
16/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PSV DATA SHEET (490-PSV-301A & 490-PSV-301B)

1 TAG No. 490-PSV-301A & 490-PSV-301B
2 LOCATION SERVICE 490-VA-301 WET AIR
General
3 FLUID WET COMPRESSED AIR
4 VALVE TYPE WITH BELLOWS SAFETY VALVE
5 TEMPERATURE (°C) 60
6 DISCHARGE FLOW RATE (Kg/h) 5214 (110%)
7 PRESSURE (Barg) OP ER. 8,5 SET 10
8 BACK PRESSURE (Barg) ATM
9 OVER PRESSURE % 10%
Process Data
10 DENSITY (Kg/m3) 11,44 @ 10 barg, 60°C (Moist Air 80% RH)
11 MOLECULAR WEIGHT 28,97
12 Cp / Cv 1,42
13 LIQUID VISCOSITY (cP) 0,02
14 DESIGN CASE Blocked Outlet
15 DESIGN CODE API 526
16 CALCULA TION CODE API 521
17 TYPE Conventional
18 INLET / OUTLET SIZE INLET 2" / OUTLET 3" (2"Jx3")
19 INLET CONNECTION 150 LB RF 125 AARH

20 OUTLET CONNECTION 150 LB RF 125 AARH

21 NON STD PARTS N/A

22 BONNET TYPE BOLTED
PSV
23 BODY / BONNET MTl. CARBON STEEL
24 NOZZLE & DISC MTL 316 S. S. + 17-4PH
25 SPRING MATERIAL CARBON STEEL
26 AREA (mm2) 609,1 (110%)
27 ORIFICE DESIGNATION 2J3
28 DISC HOLDER TYPE TO BE DEFINED BY VENDOR
29 DISC HOLDER MTl. TO BE DEFINED BY VENDOR
30 DISC MATE RIAL TO BE DEFINED BY VENDOR
31 LlMIT SWITCHES N/A
Options 32 OPTIONS N/A
33 QUANTITY 2
34 Manufacturer VTA
35 Model VTA
PURCHASE 36 Serial Number TBC
37 Requisition No. TBC
38 Purchase Order No. TBC
NOTES:

(1) PROVIDED WITH STAINLESS STEEL NAMEPLATE PERMANENTLY ATTACHED TO THE INSTRUMENT.
(2) VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
(3) TBC INDICATES TO BE ADVISED BY PURCHASER
 Sheet of Sheets
Company Document ID
17/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PSV DATA SHEET (490-PSV-302A & 490-PSV-302B)

1 TAG No. 490-PSV-302A & 490-PSV-302B
2 LOCATION SERVICE 490-VA-302 DRY AIR
General
3 FLUID DRY COMPRESSED AIR
4 VALVE TYPE WITH BELLOWS SAFETY VALVE
5 TEMPERATURE (°C) 60
6 DISCHARGE FLOW RATE (Kg/h) 2224 (110%)
7 PRESSURE (Barg) OP ER. 8,5 SET 10
8 BACK PRESSURE (Barg) ATM
9 OVER PRESSURE % 10%
Process Data
10 DENSITY (Kg/m3) 11,5 @ 10 barg, 60°C (Dry Air)
11 MOLECULAR WEIGHT 28,97
12 Cp / Cv 1,42
13 LIQUID VISCOSITY (cP) 0,02
14 DESIGN CASE Blocked Outlet
15 DESIGN CODE API 526
16 CALCULA TION CODE API 521
17 TYPE Conventional
18 INLET / OUTLET SIZE INLET 1"1/2 / OUTLET 3" (1".1/2Gx3")
19 INLET CONNECTION 600 LB RF 125 AARH

20 OUTLET CONNECTION 150 LB RF 125 AARH

21 NON STD PARTS N/A

22 BONNET TYPE BOLTED
PSV
23 BODY / BONNET MTl. CARBON STEEL
24 NOZZLE & DISC MTL 316 S. S. + 17-4PH
25 SPRING MATERIAL CARBON STEEL
26 AREA (mm2) 259,8 (110%)
27 ORIFICE DESIGNATION 1.1/2G3
28 DISC HOLDER TYPE TO BE DEFINED BY VENDOR
29 DISC HOLDER MTl. TO BE DEFINED BY VENDOR
30 DISC MATE RIAL TO BE DEFINED BY VENDOR
31 LlMIT SWITCHES N/A
Options 32 OPTIONS N/A
33 QUANTITY 2
34 Manufacturer VTA
35 Model VTA
PURCHASE 36 Serial Number TBC
37 Requisition No. TBC
38 Purchase Order No. TBC
NOTES:

(1) PROVIDED WITH STAINLESS STEEL NAMEPLATE PERMANENTLY ATTACHED TO THE INSTRUMENT.
(2) VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
(3) TBC INDICATES TO BE ADVISED BY PURCHASER
 Sheet of Sheets
Company Document ID
18/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PSV DATA SHEET (490-PSV-303A & 490-PSV-303B)

1 TAG No. 490-PSV-303A & 490-PSV-303B
2 LOCATION SERVICE 490-VA-303 DRY AIR
General
3 FLUID DRY COMPRESSED AIR
4 VALVE TYPE WITH BELLOWS SAFETY VALVE
5 TEMPERATURE (°C) 60
6 DISCHARGE FLOW RATE (Kg/h) 662 (110%)
7 PRESSURE (Barg) OP ER. 8,5 SET 10
8 BACK PRESSURE (Barg) ATM
9 OVER PRESSURE % 10%
Process Data
10 DENSITY (Kg/m3) 11,5 @ 10 barg, 60°C (Dry Air)
11 MOLECULAR WEIGHT 28,97
12 Cp / Cv 1,42
13 LIQUID VISCOSITY (cP) 0,02
14 DESIGN CASE Blocked Outlet
15 DESIGN CODE API 526
16 CALCULA TION CODE API 521
17 TYPE Conventional
18 INLET / OUTLET SIZE INLET 1" / OUTLET 2" (1"Ex2")
19 INLET CONNECTION 600 LB RF 125 AARH

20 OUTLET CONNECTION 150 LB RF 125 AARH

21 NON STD PARTS N/A

22 BONNET TYPE BOLTED
PSV
23 BODY / BONNET MTl. CARBON STEEL
24 NOZZLE & DISC MTL 316 S. S. + 17-4PH
25 SPRING MATERIAL CARBON STEEL
26 AREA (mm2) 77,4 (110%)
27 ORIFICE DESIGNATION 1E2
28 DISC HOLDER TYPE TO BE DEFINED BY VENDOR
29 DISC HOLDER MTl. TO BE DEFINED BY VENDOR
30 DISC MATE RIAL TO BE DEFINED BY VENDOR
31 LlMIT SWITCHES N/A
Options 32 OPTIONS N/A
33 QUANTITY 2
34 Manufacturer VTA
35 Model VTA
PURCHASE 36 Serial Number TBC
37 Requisition No. TBC
38 Purchase Order No. TBC
NOTES:

(1) PROVIDED WITH STAINLESS STEEL NAMEPLATE PERMANENTLY ATTACHED TO THE INSTRUMENT.
(2) VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
(3) TBC INDICATES TO BE ADVISED BY PURCHASER
 Sheet of Sheets
Company Document ID
19/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

PSV DATA SHEET (490-PSV-304A & 490-PSV-304B)

1 TAG No. 490-PSV-304A & 490-PSV-304B
2 LOCATION SERVICE 490-VA-304 DRY AIR
General
3 FLUID DRY COMPRESSED AIR
4 VALVE TYPE WITH BELLOWS SAFETY VALVE
5 TEMPERATURE (°C) 60
6 DISCHARGE FLOW RATE (Kg/h) 1382 (110%)
7 PRESSURE (Barg) OP ER. 8,5 SET 10
8 BACK PRESSURE (Barg) ATM
9 OVER PRESSURE % 10%
Process Data
10 DENSITY (Kg/m3) 11,5 @ 10 barg, 60°C (Dry Air)
11 MOLECULAR WEIGHT 28,97
12 Cp / Cv 1,42
13 LIQUID VISCOSITY (cP) 0,02
14 DESIGN CASE Blocked Outlet
15 DESIGN CODE API 526
16 CALCULA TION CODE API 521
17 TYPE Conventional
18 INLET / OUTLET SIZE INLET 1"1/2 / OUTLET 2" (1"1/2Fx2")
19 INLET CONNECTION 600 LB RF 125 AARH

20 OUTLET CONNECTION 150 LB RF 125 AARH

21 NON STD PARTS N/A

22 BONNET TYPE BOLTED
PSV
23 BODY / BONNET MTl. CARBON STEEL
24 NOZZLE & DISC MTL 316 S. S. + 17-4PH
25 SPRING MATERIAL CARBON STEEL
26 AREA (mm2) 161,4 (110%)
27 ORIFICE DESIGNATION 1.1/2F2
28 DISC HOLDER TYPE TO BE DEFINED BY VENDOR
29 DISC HOLDER MTl. TO BE DEFINED BY VENDOR
30 DISC MATE RIAL TO BE DEFINED BY VENDOR
31 LlMIT SWITCHES N/A
Options 32 OPTIONS N/A
33 QUANTITY 2
34 Manufacturer VTA
35 Model VTA
PURCHASE 36 Serial Number TBC
37 Requisition No. TBC
38 Purchase Order No. TBC
NOTES:

(1) PROVIDED WITH STAINLESS STEEL NAMEPLATE PERMANENTLY ATTACHED TO THE INSTRUMENT.
(2) VTA INDICATES VENDOR TO ADVISE INFORMATION IN HIS QUOTATION
(3) TBC INDICATES TO BE ADVISED BY PURCHASER
 Sheet of Sheets
Company Document ID
20/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

FT DATA SHEET (490-FT-301)

PROCESS DATA
01 Instrument Tag: 490-FT-301 07 Design Temperature °C: -5/90 °C
02 Service: INSTRUMENT AIR 08 Design Pressure: 10 barg
GENERAL

PROCESS
03 P&ID: 140107DPFM00042 09 Operating Pressure: 8,5 barg
04 Line Nbr/Equipment: 6"-49-IA-002-13D-G 10 Operating Temperature °C: 60 °C
05 Fluid/Phase: DRY COMPRESSED AIR 11 Flow Scale: 0 - 4800 Nm3/h.
06 Ambient Temperature °C: (Note 1) 12
DATA SHEET OF DIFFERENTIAL PRESSURE TRANSMITTERS (FLOW MEASUREMENT)
13 Type: Differential Pressure 32 Dimensions: *
14 Manufacturer: * 33 Material : Aluminium Painted Epoxy
GENERAL

ELECTRIC BOX
15 T° and P Limits: * 34 Cable Connection: Screw Terminals 1.5 mm²
16 Manufacturer Model No.: * 35 Cable Entry: ISO M20 × 1.5mm
17 Assembly : Local (**) 36 Degree Of Protection: IP 65 (min)
18 Weight : * 37 Ex Classification: N/A
19 Type : Membrane (*) 38 Protective Coating: *
20 Sensor Material : AISI 316 SS (*) 39 Tropicalization: Required
ELEM. SENS.

21 Inlet Point Material : AISI 316 SS (*) 40 Calibrated Input Field: 0 à 250 mbar *
22 Bolts/Nuts Material : AISI 316 SS (*) 41 Characteristic : Linear
CARACT. INSTR.

23 Size/Type Process Connect. 1/2 NPT F (Note 4) 42 Accuracy : ≤ 0.1% (Full Scale)
24 Connection Position : * 43 Stability: *
25 Filling Fluid : * 44 Lower/Upper Field Limits: *
26 Indicator : LCD (Note 3) 45 Min./Max. Range : *
27 Output Signal : 4÷20 mA 46 Zero Correction: Adjustable
28 Communication : HART Protocole 47 Permissible Overpressure: *
TRANS.

29 Voltage Supply : 24 VDC (Loop Powered) 48 Response Time *

30 Consumption : * 49 Mounting Support/Material Required (**)/ AISI 316
ACCESS.

31 Max. Charge : * 50 Instrument Label/Material Required / SS

51 Marking: N/A
52 Diaphragm: Not Required
Notes:
* Field to be filled/confirmed by the Supplier.
** Mounting on 6" pipe / Mounting Accessories to be included in the supply
(1) Execution suitable for outdoor applications. Temperature -5 / + 60°C.
(2) Calibration certificate required.
(3) Scale / Display Unit: Square root / m3/h
(4) The 5-way manifold is to be included (316 SS)
(5) Scale of Flow to be Measured: 0 - 4800 Nm3/h.
 Sheet of Sheets
Company Document ID
21/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

FE DATA SHEET (490-FE-301)

PROCESS DATA

01 Instrument Tag: 490-FE-301 11 Design Temperature: -5/90 °C

GENERAL

02 Service: INSTRUMENT AIR 12 Design Pressure: 10 bar g

03 P&ID No.: 140107DPFM00042 13 Ambient Temperature: -5 / + 60 °C
04 Line/Equipment No.: 6"-49-IA-002-13D-G 14 Fluid / Phase: DRY COMPRESSED AIR / GAS
15 Input Operating Pressure: 8,5 barg

PROCESS
05 DN Line: 6" (CS Schedule 40) 16 Input Operating T°: 60 °C
06 Line Internal Diameter: 154,05 mm 17 Molecular weight: 28,97
MECHANICAL

07 Pipe Thickness: 7,11 mm 18 Density: 11,5 @ 10 barg, 60°C (Dry Air)

08 Pipe Material: CS 19 Viscosity: 0,02 cP
09 Flanges Rating: 300#RF 20 Cp/Cv: 1,42
10 Paint specification: 21 Measured Flow Min/Max: 0 - 4800 Nm3/h

FLOW MEASUREMENT ELEMENT DATA SHEET

01 Type : Concentric Square Edge 22 Manufacturer Model No.: *

02 Manufacturer: * 23 Type: Square Edge
03 Manufacturer Model No.: * 24 Material: AISI 316 SS
04 Complete Assembly: Note 3 25 With or Without Handle: With (Note 3)
GENERAL

05 Assembly Dimensions: * 26 Outer Disc Diameter: *

DISC

06 Position Of Measurement Points: * 27 Disc Thickness: *

07 No. Of Measurements: 4 Nos. With Cap 28 Vent/Drainage Hole: *
08 Measurement Points Orientation: * 29 Concentric Drilling/Others: Concentric
09 Size/Type Measurement Points: 1/2" NPT F 30 Borehole Dimension (Note 5): *
10 Weight : *
11 Manufacturer: * 31 Calculation Method/Standard: Daniel Orifice Calculator
12 Flange Code Or Standard: * 32 Calculation Flow: 4800 Nm3/h (Note 2)
CALCULATION NOTE (Note 4)

13 Size/Class/Face: * 33 Differential P. Field: 0 - 250 mbar (*)

14 Connection To The Process: * 34 Calculation Temperature: -5/90 °C
15 Material: * 35 Calculation Density: 11,5 @ 10 barg, 60°C (Dry Air)
BRIDES

16 Material, Bolts And Nuts: * 36 Calculation Pressure: 10 bar g

17 Jack Bolt * 37 Specific Calculation Gravity:
18 Seal Type And Material: * 38 Beta factor (β=D/d): (*)
19 Face To Face Size: * 39 Orifice Bore Diameter (d): (*)
20 Internal Diameter: *
21 Protective Coating/Color: *
Notes:
* Field to be filled/confirmed by the Supplier.
(1) Dry Instrument Air
(2) Scale of Flow to be Measured: 0 - 4800 Nm3/h
(3) Complete Assembly: Disc + Flanges + Gaskets + Screws
(4) On the handle must be printed, at least: DN of the line, flange rating, disc drilling dimension, instrument symbol.
(5) Disc drilling dimension is preliminary. The Supplier must check this number and in any case provide, during the phase of the offer,
its calculation sheet according to the ISO 5167 standard.
 Sheet of Sheets
Company Document ID
22/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

TG DATA SHEET (490-TG-301)

Units Units
1 GENERAL : 55 GENERAL :
2 Tag number 490-TG-301 56
3 Service SERVICE AIR 57 Area
4 Line num 6"-49-UA-005-13D-G 58 Zone N/A
5 Piping Class 13D 59 Gas group N/A
6 P & ID number 140107DPFM00042 60 Temp category N/A
7 61 Enclosure IP-66
8 TEMPERATURE GAUGE 62 INDICATOR
9 63 Case nom. diameter mm 160
10 Type Bimetal 64 Case and bezel material SS 317
11 Thermowell Required 65 Dial color White
12 Mounting Local 66 Scale range °C 0-100
13 Measurement accuracy +/- 1% of range 67
14 Zero adjustment Required 68
15 Overrange protection +/- 130% of range 69
16 Connection Bottom 70
17 71
18 BIMETAL 72
19 Dial type Any angle 73
20 Stem material SS 316Ti 74
21 Stem diameter mm 9 (TBC) 75
22 Stem connection 1/2" NPT(M) 76
23 Stem length mm TBC 77
24 78
25 THERMOWELL 79
26 Type Drilled bar stock (FLGD) 80
27 Material SS 316L 81
28 Process connection 2" FL 150# RF 125 AARH 82
29 Immersion length "U" mm 200 (NOTE 1) 83
30 Flange material SS-316L 84 SPECIAL REQUIREMENTS
31 Flange rating 150# RF 85 NACE requirements No
32 Flange facing/finish RA 1.6/3.2 MICRON 86 Material certificate Required
33 Gauge connection 1/2" NPT(F) 87
34 Thermowell Bore mm 9,5 (TBC) 88
35 Thermowell as per drawing 89
36 90
37 PROCESS DATA: 91
38 Medium / phase Air /Gas 92
39 93
40 Operating conditions Min /Norm/ Max 94
41 Pressure barg 3,5 / 8,5 / 10 95
42 Temperature °C 60 96
43 97
44 Design Pressure barg 10 98
45 Design temperature °C -5/90 99
46 100
47 Stream Velocity m/s NA 101
48 102
49 PURCHASE DATA: 103 REMARKS:
50 Manufacturer 104
51 Model number 105
52 Serial number 106
53 Supplier 107
54 Item number 01 108

ABBREVIATIONS:
TBC: To Be Confirmed By Supplier
NOTES:
NOTE 1: Immersion Length for TG installation on 6" pipe.
 Sheet of Sheets
Company Document ID
23/23

Validity Status Revision Number

140107DIEH00192
EX-CO 00

TT DATA SHEET (490-TT-301)

Units Units
1 GENERAL : 44 GENERAL :
2 Tag number 490-TT-301 45
3 Service SERVICE AIR 46 Area
4 Line Number 6"-49-UA-005-13D-G 47 Zone N/A
5 Piping Class 13D 48 Gas group N/A
6 P & ID number 140107DPFM00042 49 Temp. category N/A
7 Equipment number 50 Enclosure/Elect. Protection IP-66
8 TEMPERATURE ELEMENT 51 TRANSMITTER
9 52 Type Head Mounted
10 Type RTD-PT 100, 3 wire 53 Power supply 24 V DC, Two wire
11 Thermowell Required 54 Output signal / SMART 4 ~ 20 mA / Yes
12 No. of elements Simplex 55 Range °C 0 - 100
13 Thermowell Immersion length "U" mm 200 (NOTE 1) 56 Accuracy % 0.025 / of span
14 Element material Platinum 57 Cable entry M20 X 1.5 ISO with Glands
15 58
16 THERMOWELL 59
17 60
18 Type Drilled bar stock (FLGD) 61
19 Material SS-316L 62 SPECIAL REQUIREMENTS
20 Process connection 2" FL 150# RF 125 AARH 63 NACE requirements No
21 Flange material SS-316L 64 Material certificate Required
22 Flange rating 150# RF 65
23 Flange Facing/Finish RA 1.6/3.2 MICRON 66
24 Instrument connection 1/2" NPT(F) 67
25 Thermowell as per drawing 68
26 69
27 PROCESS DATA: 70
28 71
29 72
30 Operating conditions Min /Norm/ Max 73 NB
31 Pressure barg 3,5 / 8,5 / 10 74 B
32 Temperature °C 60 75
33 76
34 Design Pressure barg 10 77
35 Design Temperature °C -5/90 78
36 79
37 80
38 PURCHASE DATA: 81 REMARKS:
39 Manufacturer 82
40 Model number 83
41 Serial number 84
42 Supplier 85
43 Item number 1 86

NOTES:
NOTE 1: Immersion Length for TG installation on 6" pipe.