Document classified as: 2 - Company Confidential #

TAKORADI-TEMA INTERCONNECTION PROJECT (TTIP)

PHASE I

INSTRUMENTS SPECIFICATIONS AND DATASHEETS

FOR INDIRECT FIRED HEATERS - ITEM FY2301 A/B/C

ISSUED APPROVED FOR

EX-CO 00 31/05/2018 F.BALLERINI D.RIZZI A.STELLIN
CONSTRUCTION
EX-DE 02 16/02/2018 ISSUED FOR COMMENTS F.BALLERINI D.RIZZI A.STELLIN
EX-DE 01 20/12/2017 ISSUED FOR COMMENTS F.BALLERINI D.RIZZI A.STELLIN
EX-DE 00 07/12/2017 ISSUED FOR COMMENTS F.BALLERINI D.RIZZI A.STELLIN
Validity Revision
Contractor Contractor Contractor
Status Number Date Description Company
Prepared Verified Approved
Revision index
Company Logo and Business Name Project name Company Document ID
TAKORADI-TEMA
INTERCONNECTION 351701DIGSF0053
PROJECT (TTIP)
PHASE I Job N.
Contractor Logo and Business Name Contractor Document ID
SAIWEST LIMITED 24640401MIIBF0053
N° 2 Avenue Lincoln, Wonda World Estates,
Julius Nyerere Sreet, Ridge, Accra
Ghana
Job N.
Vendor Logo and Business Name Vendor Document ID
50001000A0IDS303EN
PIETRO FIORENTINI
Job N.
Facility and SubFacility Name Scale Sheet of Sheets

TAKORADI GNGC RMS n.a. 1 / 30

Document Title Supersedes N.
Superseded by N.
INSTRUMENTS SPECIFICATIONS AND DATASHEETS
FOR INDIRECT FIRED HEATERS - ITEM FY2301 A/B/C Plant area Plant unit
n.a. n.a.
Software: Microsoft Excel Filename: 351701DIGSF0053_EXCO00_30.XLSX
This document is property of eni ghana exploration and production ltd.
It shall neither be shown to Third Parties not used for purposes other than those for which it has been sent.
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 2/30
Validity Revision
Contractor Document ID 24640401MIIBF0053 Status Number
Vendor Document ID 50001000A0IDS303EN EX-CO 00

Project/Initiative Name TAKORADI-TEMA INTERCONNECTION PROJECT (TTIP) PHASE I

INSTRUMENTS SPECIFICATIONS AND DATASHEETS
Document Title
FOR INDIRECT FIRED HEATERS - ITEM FY2301 A/B/C
Abstract

Datasheets of supplied intruments and related accessories describing their technical features

Document Verification
Preparedby Signature Date
F.BALLERINI 31/05/2018
Vendor

Checked by Signature Date

D.RIZZI 31/05/2018
Approved by Signature Date
A.STELLIN 31/05/2018
Prepared by Signature Date
Contractor

Checked by Signature Date

Approved by Signature Date

by Signature Date
Company

This document is property of eni ghana exploration and production ltd.

It shall neither be shown to Third Parties not used for purposes other than those for which it has been sent.
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 3/30
Validity Revision
Contractor Document ID 24640401MIIBF0053 Status Number
Vendor Document ID 50001000A0IDS303EN EX-CO 00

REVISION LIST
EX-DE 00 ISSUED FOR COMMENTS
EX-DE 01 ISSUED FOR COMMENTS
EX-DE 02 ISSUED FOR COMMENTS
EX-CO 00 ISSUED APPROVED FOR CONSTRUCTION

HOLD RECORD

ASSUMPTION RECORD

This document is property of eni ghana exploration and production ltd.

It shall neither be shown to Third Parties not used for purposes other than those for which it has been sent.
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 4/30
Validity Revision
Contractor Document ID 24640401MIIBF0053 Status Number
Vendor Document ID 50001000A0IDS303EN EX-CO 00

TABLE OF CONTENTS
SHEET 1 COVER
SHEET 2 DOCUMENT VERIFICATION
SHEET 3 REVISION LIST
SHEET 4 TABLE OF CONTENTS

SHEET 5
SECTION 1:
INSTRUMENTATION INCLUDED IN THE HIGH PRESSURE GAS LINE AND WATER BATH HEATER

SHEET 6 TEMPERATURE TRANSMITTER DATA SHEET

SHEET 7 TEMPERATURE TRANSMITTER DATA SHEET
SHEET 8 TEMPERATURE TRANSMITTER DATA SHEET
SHEET 9 TEMPERATURE TRANSMITTER DATA SHEET
SHEET 10 TEMPERATURE SWITCHES DATA SHEET
SHEET 11 TEMPERATURE SWITCHES DATA SHEET
SHEET 12 TEMPERATURE GAUGES DATA SHEET
SHEET 13 LEVEL SWITCH DATA SHEET
SHEET 14 LEVEL GAUGE DATA SHEET
SHEET 15 LEVEL TRANSMITTER DATA SHEET
SHEET 16 FLAMMABLE GAS DETECTOR DATA SHEET
SHEET 17 PRESSURE GAUGE DATA SHEET
SHEET 18 FLANGED DBB MANIFOLD DATA SHEET
SHEET 19 PRESSURE DIFFERENTIAL GAUGE DATA SHEET
SHEET 20 THREADED 5V MANIFOLD - 6 WAYS DATA SHEET

SHEET 21 SECTION 2:
INSTRUMENTATION INCLUDED IN THE FUEL GAS LINE AND BURNER PACKAGE
SHEET 22 PRESSURE GAUGE DATA SHEET
SHEET 23 PRESSURE SWITCH DATA SHEET
SHEET 24 DIFFERENTIAL PRESSURE SWITCH DATA SHEET
SHEET 25 FLANGED DBB MANIFOLD DATA SHEET
SHEET 26 THREADED DBB 3V MANIFOLD DATA SHEET
SHEET 27 THREADED 5V MANIFOLD - 6 WAYS DATA SHEET
SHEET 28 SOLENOID VALVES DATA SHEET
SHEET 29 BLOWER TEMPERATURE TRANSMITTER DATA SHEET
SHEET 30 BLOWER VIBRATION TRANSMITTER DATA SHEET

This document is property of eni ghana exploration and production ltd.

It shall neither be shown to Third Parties not used for purposes other than those for which it has been sent.
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 5/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

SECTION 1:
INSTRUMENTATION INCLUDED IN THE HIGH
PRESSURE GAS LINE AND WATER BATH HEATER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 6/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

TEMPERATURE TRANSMITTER
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: Water
2. Function Record Indicate Control Blind Trans
Other horizontal mounting with LDC display
3. Case MFR STD Nom. Size Color: MFR STD Other
4. Mounting Flush Surface Yoke Other
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class A (IEC 60751)
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other LOOP POWERED
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other Smart type (Hart Protocol)
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range Set at
Overrange protection to
20. Bulb Type Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght Mtl. Armor
22. Well Mtl. SS 316 Insertion 450mm Lag Ext. VENDOR STD Conn 2"ANSI 150 RF
Constr: Drilled Built-Up Other TAPERED - 1/2" NPT INSTRUM
23. Alarm Switches Quantity Form Rating
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other Pt100 3 wire, double element (class A - IEC 60751) , LCD DISPLAY WITH
ENGINEERING UNITS. ELECTRICAL CONNECTION 1/2"NPT-F
26. MFR & Model No. TBD
DESCRIPTION Nozzle
Operat. Design. Operat. Design.
Inside Span set MANUFACT.
TAG Press. Press. Temp. Temp. P.F. CODE
Diameter (°C) Model
(barg) (barg) (°C) (°C)
(mm)
TIT/TW-23-202-ON WBH BATH TEMPERATURE ATM F.V./0,69 0÷+86 +100 49 0÷+100 PFR50001000S501 ABB TSP331
TIT/TW-23-211-ON WBH BATH TEMPERATURE ATM F.V./0,69 0÷+86 +100 49 0÷+100 PFR50001000S501 ABB TSP331
TIT/TW-23-212-ON WBH BATH TEMPERATURE ATM F.V./0,69 0÷+86 +100 49 0÷+100 PFR50001000S501 ABB TSP331
TIT/TW-23-221-ON WBH BATH TEMPERATURE ATM F.V./0,69 0÷+86 +100 49 0÷+100 PFR50001000S501 ABB TSP331
TIT/TW-23-222-ON WBH BATH TEMPERATURE ATM F.V./0,69 0÷+86 +100 49 0÷+100 PFR50001000S501 ABB TSP331
TIT/TW-23-231-ON WBH BATH TEMPERATURE ATM F.V./0,69 0÷+86 +100 49 0÷+100 PFR50001000S501 ABB TSP331

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 7/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

TEMPERATURE TRANSMITTER
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: Exhaust on WBH stack tip
2. Function Record Indicate Control Blind Trans
Other horizontal mounting
3. Case MFR STD Nom. Size Color: MFR STD Other
4. Mounting Flush Surface Yoke Other
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class A (IEC 60751)
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other LOOP POWERED
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other Smart type (Hart Protocol)
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range Set at
Overrange protection to
20. Bulb Type Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght Mtl. Armor
22. Well Mtl. SS 316 Insertion 500 mm Lag Ext. VENDOR STD Conn 2"ANSI 150 RF
Constr: Drilled Built-Up Other TAPERED - 1/2" NPT INSTRUM
23. Alarm Switches Quantity Form Rating
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other Pt100 3 wire, double element (class A - IEC 60751)
ELECTRICAL CONNECTION 1/2"NPT-F, SIL 2 LEVEL CERTIFIED
26. MFR & Model No. ABB TTH200.Y0.H.BF.CS
DESCRIPTION Nozzle
Operat. Design. Operat. Design.
Inside Span set MANUFACT.
TAG Press. Press. Temp. Temp. P.F. CODE
Diameter (°C) Model
(barg) (barg) (°C) (°C)
(mm)
TT/TW-23-204-ON WBH FY2301A STACK TIP ATM ATM 0÷+265 +350 49 0÷+400 PFR50001000S502 ABB TTH200
TT/TW-23-244-ON WBH FY2301B STACK TIP ATM ATM 0÷+265 +350 49 0÷+400 PFR50001000S502 ABB TTH200
TT/TW-23-254-ON WBH FY2301C STACK TIP ATM ATM 0÷+265 +350 49 0÷+400 PFR50001000S502 ABB TTH200

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX & CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 8/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

TEMPERATURE TRANSMITTER
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: Natural Gas - ESD
2. Function Record Indicate Control Blind Trans
Other With LCD Display
3. Case MFR STD Nom. Size Color: MFR STD Other
4. Mounting Flush Surface Yoke Other
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class A (IEC 60751)
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other LOOP POWERED
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other Smart type (Hart Protocol)
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range Set at
Overrange protection to
20. Bulb Type Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght Mtl. Armor
22. Well Mtl. SS 316 Insertion 300 mm (8) Lag Ext. VENDOR STD Conn 2"ANSI 900 RF
Constr: Drilled Built-Up Other TAPERED - 1/2" NPT INSTRUM
23. Alarm Switches Quantity Form Rating
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other Pt100 3 wire, double element (class A - IEC 60751) , LCD DISPLAY WITH
ENGINEERING UNITS. ELECTRICAL CONNECTION 1/2"NPT-F, SIL 2 LEVEL CERTIFIED
26. MFR & Model No. ABB TTF300.H5.C.2.H.BF-CS
DESCRIPTION Nozzle
Operat. Design. Operat. Design.
Inside Span set MANUFACT.
TAG Press. Press. Temp. Temp. P.F. CODE
Diameter (°C) Model
(barg) (barg) (°C) (°C)
(mm)
TIT/TW-23-206-ON OUTLET GAS TEMP. (ESD) 66 138 0 ÷ +40 -29 ÷+100 49 0 ÷ +100 PFR50001000S510 ABB TTF300
TIT/TW-23-216-ON OUTLET GAS TEMP. (ESD) 66 138 0 ÷ +40 -29 ÷+100 49 0 ÷ +100 PFR50001000S510 ABB TTF300
TIT/TW-23-226-ON OUTLET GAS TEMP. (ESD) 66 138 0 ÷ +40 -29 ÷+100 49 0 ÷ +100 PFR50001000S510 ABB TTF300

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX & CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) THERMOWELL CALCULATION SHEET REQUIRED, ACC. TO ASME PTC 19.3 TW-2016 @ T=30 °C, P=26,5 barg, velocity=27 m/s, medium density=22,5 kg/m³
(9) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 9/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

TEMPERATURE TRANSMITTER
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: Natural Gas - UCP
2. Function Record Indicate Control Blind Trans
Other with LCD display
3. Case MFR STD Nom. Size Color: MFR STD Other
4. Mounting Flush Surface Yoke Other
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class A (IEC 60751)
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other LOOP POWERED
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other Smart type (Hart Protocol)
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range Set at
Overrange protection to
20. Bulb Type Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght Mtl. Armor
22. Well Mtl. SS 316 Insertion 300 mm (8) Lag Ext. VENDOR STD Conn 2"ANSI 900 RF
Constr: Drilled Built-Up Other TAPERED - 1/2" NPT INSTRUM
23. Alarm Switches Quantity Form Rating
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other Pt100 3 wire, double element (class A - IEC 60751) , LCD DISPLAY WITH
ENGINEERING UNITS. ELECTRICAL CONNECTION 1/2"NPT-F, SIL 2 LEVEL CERTIFIED
26. MFR & Model No. ABB TTF300.H5.C.2.H.BF-CS
Nozzle
Operat. Design. Operat. Design.
Inside Span set MANUFACT.
TAG DESCRIPTION Press. Press. Temp. Temp. P.F. CODE
Diameter (°C) Model
(barg) (barg) (°C) (°C)
(mm)
TIT/TW-23-207-ON OUTLET GAS TEMP. (UCP) 66 138 0 ÷ +40 -29 ÷+100 49 0 ÷ +100 PFR50001000S510 ABB TTF300
TIT/TW-23-217-ON OUTLET GAS TEMP. (UCP) 66 138 0 ÷ +40 -29 ÷+100 49 0 ÷ +100 PFR50001000S510 ABB TTF300
TIT/TW-23-227-ON OUTLET GAS TEMP. (UCP) 66 138 0 ÷ +40 -29 ÷+100 49 0 ÷ +100 PFR50001000S510 ABB TTF300
TW-23-232-ON INLET GAS THERMOWELL 66 138 0 ÷ +40 -29 ÷+100 49 - PFR50001000S511 ABB TWS
TW-23-242-ON INLET GAS THERMOWELL 66 138 0 ÷ +40 -29 ÷+100 49 - PFR50001000S511 ABB TWS
TW-23-252-ON INLET GAS THERMOWELL 66 138 0 ÷ +40 -29 ÷+100 49 - PFR50001000S511 ABB TWS

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX & CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) THERMOWELL CALCULATION SHEET REQUIRED, ACC. TO ASME PTC 19.3 TW-2016 @ T=30 °C, P=26,5 barg, velocity=27 m/s, medium density=22,5 kg/m³
(9) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 10/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

TEMPERATURE SWITCHES
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: Exhaust stack inlet
2. Function Record Indicate Control Blind Trans
Other THERMOSWITCH
3. Case MFR STD Nom. Size Color: MFR STD Other
4. Mounting Flush Surface Yoke Other 2" pipe mounting
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other Factory set
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range +200 to +350 °C Set at +300 °C
Overrange protection to
20. Bulb Type Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght 5m Mtl. Armor
22. Well Mtl. SS 316 Insertion 500 mm Lag Ext. VENDOR STD Conn 2"ANSI 150 RF
Constr: Drilled Built-Up Other TAPERED - 1/2" NPT INSTRUM
23. Alarm Switches Quantity 1 Form SPDT Rating 5A - 24 Vdc
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other
ELECTRICAL CONNECTION 1/2"NPT-F, SIL 2 LEVEL CERTIFIED
26. MFR & Model No. BETA BV model. W3-T588H-CXX-S0-N1-V-Y
DESCRIPTION Nozzle
Operat. Design. Operat. Design.
Inside Set at MANUFACT.
TAG Press. Press. Temp. Temp. P.F. CODE
Diameter (°C) Model
(barg) (barg) (°C) (°C)
(mm)
+300 BETA BV
TSH/TW-23-205-ON STACK TEMPERATURE SWITCH ATM ATM 0÷+265 +350 49
Temp rising
PFR50001000S503 W3-T588H
+300 BETA BV
TSH/TW-23-215-ON STACK TEMPERATURE SWITCH ATM ATM 0÷+265 +350 49
Temp rising
PFR50001000S503 W3-T588H
+300 BETA BV
TSH/TW-23-225-ON STACK TEMPERATURE SWITCH ATM ATM 0÷+265 +350 49
Temp rising
PFR50001000S503 W3-T588H

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 11/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

TEMPERATURE SWITCHES
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION PROJECT
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
(TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: Hot Water
2. Function Record Indicate Control Blind Trans
Other THERMOSWITCH
3. Case MFR STD Nom. Size Color: MFR STD Other
4. Mounting Flush Surface Yoke Other Horizontal mounting
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other Factory set
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range +60 to +100 °C Set at +93 °C
Overrange protection to
20. Bulb Type Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght Mtl. Armor
22. Well Mtl. SS 316 Insertion 450 mm Lag Ext. VENDOR STD Conn 2"ANSI 150 RF
Constr: Drilled Built-Up Other TAPERED - 1/2" NPT INSTRUM
23. Alarm Switches Quantity 1 Form SPDT Rating 5A - 24 Vdc
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other
ELECTRICAL CONNECTION 1/2"NPT-F, SIL 2 LEVEL CERTIFIED
26. MFR & Model No. BETA BV model W3-T568H-CXX-S0-N1-V-Y
Nozzle
Operat. Design. Operat. Design.
Inside Set at MANUFACT.
TAG DESCRIPTION Press. Press. Temp. Temp. P.F. CODE
Diameter (°C) Model
(barg) (barg) (°C) (°C)
(mm)
+93 BETA BV
TSHH/TW-23-203-ON WATER BATH TEMP. SWITCH ATM F.V./0,69 0÷+86 +100 49
Temp rising
PFR50001000S504 W3-T568H
+93 BETA BV
TSHH/TW-23-213-ON WATER BATH TEMP. SWITCH ATM F.V./0,69 0÷+86 +100 49
Temp rising
PFR50001000S504 W3-T568H
+93 BETA BV
TSHH/TW-23-223-ON WATER BATH TEMP. SWITCH ATM F.V./0,69 0÷+86 +100 49
Temp rising
PFR50001000S504 W3-T568H

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 12/30
Revision
Contractor Document ID 24640401MIIBF0053 Validity Status
Number
Vendor Document ID 50001000A0IDS303EN EX-CO 00

TEMPERATURE GAUGES
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION PROJECT
A 04/12/2017 FIRST ISSUE F.B. D.R. A.S.
(TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA

BI METAL THERMOMETER WELL

1. Stem: Threaded Plain Union 11. None Included By Others

Material 316 STAINLESS STEEL 12. Material: 304 SS 316SS
2. Steam or Union Thread: 1/2"NPT 3/4"NPT Other: 2" ANSI 150RF
3. Steam Diameter: .250 in.
6mm 8mm 10mm 13. Construction: Drilled Built-Up
4. Case Material: STD Other SS 316 Other: BAR STOCK
5. Dial Size DN100 Other WHITE 14. Well Style: Straigth Stepped Tapered
6. Scale Length 270° Other BLACK 15. Mount. Style: Threaded Welded Flanged
7. Form: Fig. No. 2 Adjustable 16. Well. Insertion Length: 450 mm
8. External Calibrator Herm. sealed Case IP 65 17. Well. Lag extension: VENDOR STD
MFR . & Model No. MFR. & Model No. TBD
9. Nominal Accuracy 1,0 % of full scale
10. Repeatability 0,5 %
MFR. & Model No. WIKA - A5500

STEM
LENGTH 90°
135° 135° 135°
LENGTH

FIG. 1 LEFT RIGHT

STEM

BOTTOM FIG. 2
FORM BACK FORM STRAIGHT BACK 135° RIGHT-LEFT
(STRAIGHT) (ANGLE) FIG. 3 FIG. 4 - 5 FIG. 6 - 7 FIG. 8 - 9

Operat. Nozzle Inside

Design. Press. Operat. Temp. Design. Temp. Scale range MANUFACT.
Tag No. Description Press. Diameter PF Code
(barg) (°C) (°C) (°C) Model
(barg) (mm)

TG/TW-23-215-ON Water Bath Temperature ATM F.V./0,69 0÷+86 +100 49 0 ÷ 120 PFR50001000S505 WIKA - A5500
TG/TW-23-225-ON Water Bath Temperature ATM F.V./0,69 0÷+86 +100 49 0 ÷ 120 PFR50001000S505 WIKA - A5500
TG/TW-23-235-ON Water Bath Temperature ATM F.V./0,69 0÷+86 +100 49 0 ÷ 120 PFR50001000S505 WIKA - A5500

NOTES:
(1) CASE MATERIAL COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(2) ATEX CERTIFICATE REQUIRED
(3) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(4) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(5) C/W CERTIFICATE OF CALIBRATION
(6) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
(7) AMBIENT TEMEPRATURE: 21 °C to 31 °C
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 13/30

Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

LEVEL SWITCH
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION PROJECT
A 29/11/2017 FIRST ISSUE F.B. D.R. A.S.
(TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND DATASHEETS
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
FOR INDIRECT FIRED HEATERS - ITEM FY2301 A/B/C
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.

GHANA
1 Tag Number LSLL-23-206-ON LSLL-23-216-ON LSLL-23-226-ON
2 No. Items 1 1 1

WATER EXP. TANK LEVEL WATER EXP. TANK LEVEL WATER EXP. TANK LEVEL
3 Service
SWITCH SWITCH SWITCH

4 Line No. / Vessel No. FY2301A FY2301B FY2301C

5 Body or Cage Mtl 316 SS 316 SS 316 SS
6 Rating ANSI 150 ANSI 150 ANSI 150
7 Conn Location Upper SIDE SIDE SIDE
8 Conn Size FLG 1"#150 RF FLG 1"#150 RF FLG 1"#150 RF
9 Conn Location Lower SIDE SIDE SIDE
10 Conn Size FLG 1"#150 RF FLG 1"#150 RF FLG 1"#150 RF
11 Case Mounting - - -
BODY/CAGE
12 Type FLOAT FLOAT FLOAT
13 Chamber End Bottom DRAIN BALL VALVE 1/2" NPT DRAIN BALL VALVE 1/2" NPT DRAIN BALL VALVE 1/2" NPT
14 Chamber top VENT BALL VALVE 1/2" NPT VENT BALL VALVE 1/2" NPT VENT BALL VALVE 1/2" NPT
15 Centre-to-Centre Proc. Conn. 178 mm 178 mm 178 mm
16 Orientation VERTICAL VERTICAL VERTICAL
17 Cooling Extension NONE NONE NONE
18

19 Dimensions STANDARD MFR STANDARD MFR STANDARD MFR

20 Insertion Depth - - -
DISPLACER OR
21 Displacer Extension - - -
FLOAT
22 Disp. Or Float Material 316 SS 316 SS 316 SS
23 Displacer Spring/Tube Mtl - - -
24 Function VERY LOW LEVEL ALARM VERY LOW LEVEL ALARM VERY LOW LEVEL ALARM
25 Output SWITCH SWITCH SWITCH
26 Control Modes ON/OFF ON/OFF ON/OFF
27 Differential FIXED 25 mm FIXED 25 mm FIXED 25 mm

XMTR / CONTR. 28 Output Action: SWITCH FOR LEVEL DECREASE SWITCH FOR LEVEL DECREASE SWITCH FOR LEVEL DECREASE

29 Mounting INTEGRAL INTEGRAL INTEGRAL

Min IP65 Min IP65 Min IP65
30 Enclosure Class EXPLOSION PROOF Ex-d IIB EXPLOSION PROOF Ex-d IIB EXPLOSION PROOF Ex-d IIB
T4 T4 T4
31 Elec. Power or Air Supply 24 Vdc 24 Vdc 24 Vdc
32 Upper Fluid AIR AIR AIR
33 Lower Fluid WATER WATER WATER
SERVICE 34 Sp.gr. Upper Lower - 0,97 kg/m3 - 0,97 kg/m3 - 0,97 kg/m3
35 Press. Max. Normal 40 mbarg ATM 40 mbarg ATM 40 mbarg ATM
36 Temp. Max. Normal 93 °C 60 to 90 °C 93 °C 60 to 90 °C 93 °C 60 to 90 °C
37 Airset Supply Gage - - - - - -
38 Gage Glass Connection - - -
39 Gage Glass Model No. - - -
40 Contact: No. Form 1 SPDT TROPICALIZED (1) 1 SPDT TROPICALIZED (1) 1 SPDT TROPICALIZED (1)
OPTIONS 41 Contact Rating 6A @24 Vdc 6A @24 Vdc 6A @24 Vdc
42 Action - - -
43 LCD display - - -
44 Electrical Connection 1/2"NPT 1/2"NPT 1/2"NPT
45 SIL level SIL 2 SIL 2 SIL 2
46 Manufacturer MAGNETROL MAGNETROL MAGNETROL
47 Model Number XB41-BS30-BA9 XB41-BS30-BA9 XB41-BS30-BA9
48 PF Code PFR50001000S506 PFR50001000S506 PFR50001000S506
Notes:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944) ONLY FOR HOUSING
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF WETTED PARTS MATERIAL
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 14/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

LEVEL GAUGE
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION PROJECT
(TTIP)
A 29/11/2017 FIRST ISSUE F.B. D.R. A.S.
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
DATASHEETS
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Gage Column Cocks GAGE COCKS
Assembled with Nipples Unassembled 8. Type: Offset Straight
GAGE GLASSES 9. Conn: Vessel 1" Gage 1/2"NPT Vent/Drain 1/2"NPT
2. Type: Reflex Transparen Tubolar 10. Material: Body SS 316 Trim S.S.
Large Chamber Weld Pad 11. Min. Rating: 0,69 bar/FULL VACUUM bar at 100 °C
3. Conn: Size and Type 1" ANSI 150 RF 12. Construction: FORGED
Top & Bot. Side Back 13. Type Of Conn: Vessel 1" ANSI 150RF
Vent GATE VALVE - 1/2"NPT Drain GATE VALVE - 1/2"NPT Gage 1/2" NIPPLE
4. Material SS 316 14. Bonnet SCREWED
5. Min. Rating 0,69 bar/FULL VACUUM bar at 100 °C 15. Options: Ball Check Renewable Seats
6. Options: Illuminator Mica Shield Other
Internal Tube External Jkt 16. MFR & Model N° SIMER model LGR 100
Non-Frost Ext. Lenght
Calb. Scale Other
7. MFR & Model N° SIMER model LGR 100
Operating
Rev Q.ty Tag N° Visible Glass CL. Conn. PF Code Services Note
Temp. (°C) Press. (barg)
A 1 LG-23-205-ON 1400 mm 1580 mm PFR50001000S507 +60 ÷ +90 ATM to 0,04 WATER LEVEL EXP. TANK see below
A 1 LG-23-215-ON 1400 mm 1580 mm PFR50001000S507 +60 ÷ +90 ATM to 0,04 WATER LEVEL EXP. TANK see below
A 1 LG-23-225-ON 1400 mm 1580 mm PFR50001000S507 +60 ÷ +90 ATM to 0,04 WATER LEVEL EXP. TANK see below

NOTES:

(1) ATEX CERTIFICATE (IF APPLICABLE)

(2) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(3) C/W EN10204 3.1 CERTIFICATE OF WETTED PARTS MATERIAL
(4) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
(5) WITH GRADUATED SCALE IN MM, ZERO WILL BE PLACED AT 257 MM FROM THE CENTER OF BOTTOM CONNECTION FLANGE, TOP WILL BE AT 1200 MM FROM ZERO
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 15/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

LEVEL TRANSMITTER
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: Water Exp. Tank Level
2. Function Record Indicate Control Blind Trans
Other see notes
3. Case MFR STD Nom. Size Color: MFR STD Other
4. Mounting Flush Surface Yoke Other 2" pipe mounting
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other LOOP POWERED
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other Smart type (Hart Protocol)
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Service Flow Level Diff. Press. Other
18. Process Data Diaphragm Helix Bourdon Other
19. Material 316 SS Ber.Copper Other
Fixed Adj. Range 0 -1320 mmWC Set at 0 to 1200 mmWC
Overrange protection to
ELEMENT 20. Bulb Type Mtl. Extension: Lenght Type
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght 5m Mtl. 316 SS Armor
22. Process connection Conn Remote Flanged Seals 2"ANSI 150 RF with identical capillary lenght

23. Alarm Switches Quantity Form Rating

24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other LCD DISPLAY WITH ENGINEERING UNITS
ELECTRICAL CONNECTION 1/2"NPT-F
26. MFR & Model No. ENDRESS HAUSER Deltabar S FMD78
DESCRIPTION Operat. Design. Operat. Design.
Span set MANUFACT.
TAG Press. Press. Temp. Temp. P.F. CODE
(mmWC) Model
(mbarg) (barg) (°C) (°C)
ENDRESS H.
LIT-23-207-ON WATER EXP.TANK LEVEL ATM to 40 F.V./0,69 60 ÷ 90 +100 0 ÷ 1200 PFR50001000S508 Deltabar S
FMD78
ENDRESS H.
LIT-23-217-ON WATER EXP.TANK LEVEL ATM to 40 F.V./0,69 60 ÷ 90 +100 0 ÷ 1200 PFR50001000S508 Deltabar S
FMD78
ENDRESS H.
LIT-23-227-ON WATER EXP.TANK LEVEL ATM to 40 F.V./0,69 60 ÷ 90 +100 0 ÷ 1200 PFR50001000S508 Deltabar S
FMD78

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR WETTED PARTS
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
(8) ZERO WILL BE SETTED AT 120 mm FROM BOTTOM FLANGE CENTER, MAX LEVEL WILL BE SETTED AT 1320 mm FROM BOTTOM FLANGE CENTER
 Document classified as: 2 - Company Confidential
#

Sheet of Sheets
Company Document ID 351701DIGSF0053 16/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

FLAMMABLE GAS DETECTOR

DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Q.ty: N°3 (Sensor+transm.) Service: Water Exp. Tank Gas Detector
2. Detector Type Infrared Catalytic Other Display will be placed @10m from sensor

3. Measuring Range 0 to 100% LEL

SYSTEM 4. Gas to detect Natural Gas
SPECIFICATION 5. Construction General Purpose Weather Proof Expl. Proof Ex-d Class
For Use In Intrin. Safe System Other Ex-d IIB T4 - min. IP65 - TROPICALIZED (1) - SIL 2
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other LOOP POWERED
7.
8. Sensor Location Inside Water Expansion Tank
9. Process data Temperature: +21 to +90 °C Pressure: ATM to 40 mbar
Notes: Free space of the tank is filled with 50% Air and 50 % water in vapour phase
ENVIRONMENTAL
SPECIFICATION
10. Transmitter Location Outside
11. Ambient data Temperature: +21 to +31 °C Pressure: ATM mbar
Climate: Hot wet tropical climate (1)
12. Transmitter 4÷20 mA
XMTR
Output Other with n°2 CONTACTS SPDT (the 1st setted @ 20% LEL, the 2nd setted @ 50% LEL)

13. Options Duct mounting kit for remote sensor including calibration cap. Duct kit will be suitable to be
OPTIONS
connected to a 6" ANSI 150 RF Flanged connection. Junction box for sensor & weather protection canopy

14. MFR & Model No. HONEYWELL ANALYTICS model: SENSEPOINT (sensor) + XNX (transmitter)
DESCRIPTION Nozzle
Operat. Design. Operat. Design.
Inside Span set MANUFACT.
TAG Press. Press. Temp. Temp. P.F. CODE
Diameter (%LEL) Model
(mbarg) (barg) (°C) (°C)
(mm)
AE-23-201-ON GAS DETECTOR (SENSOR) ATM to 40 F.V./0,69 0÷+90 +100 77 0÷100% PFR50001000S509 SENSEPOINT
AT-23-201-ON GAS DETECTOR (Transmitter) ATM - 21÷+31 - - 0÷100% Included in sensor code XNX
AE-23-211-ON GAS DETECTOR (SENSOR) ATM to 40 F.V./0,69 0÷+90 +100 77 0÷100% PFR50001000S509 SENSEPOINT
AT-23-211-ON GAS DETECTOR (Transmitter) ATM - 21÷+31 - - 0÷100% Included in sensor code XNX
AE-23-221-ON GAS DETECTOR (SENSOR) ATM to 40 F.V./0,69 0÷+90 +100 77 0÷100% PFR50001000S509 SENSEPOINT
AT-23-221-ON GAS DETECTOR (Transmitter) ATM - 21÷+31 - - 0÷100% Included in sensor code XNX

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(5) C/W CERTIFICATE OF CALIBRATION
(6) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
(7) C/W SIL CERTIFICATE
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 17/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

PRESSURE GAUGE
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Type: Direct Rdg 3-15 Ib Receiver 10. Manufacturer WIKA
Other EN 837-1 Model No. 233.30
2. Mounting: Surface Local Flush 11. Press. Element: Bourdon Bellows
3. Dial: Diameter DN 100 (270°) Color Wh.all/bk let.din 6203 Other
4. Case: Cast Iron Aluminum ABS 12. Element Mtl: Bronze Steel 316 SS
Other STAINLESS STEEL Other
5. Ring: Screwed Hinged Slip Std 13. Socket Mtl: Bronze Steel 316 SS
Other Cam ring (bayonet type), natural finish ss Other
6. Blow-Out Protection: None Back Disc 14. Connection: ¼"NPT ½"NPT Other
Solid Front Other IP 65 min. Bottom Back
7. Lens: Glass Plastic 15. Movement: Bronze SS Nylon
8. Options: Sylphon Material Other Pointer alluminium, black
Snubber 16. Filling fluid Glycerine with Safety plug
Blow out protect. 17. Connections Gage Conn. 1/2" NPT-M
Pressure Limit Valve 18. Diaphragm Seal YES NO
Movement Damping MFG Type
9. Nominal Accuracy Required ± 1.0% OF FULL SCALE READING Wetted Pert Mtl. Other Mtl.
Fill Fluid
Process Conn. Gage Conn.

Operat. Design. Operat. Design.

SCALE RANGE MANUFACT.
TAG DESCRIPTION Press. Press. Temp. Temp. P.F. CODE
(barg) Model
(barg) (barg) (°C) (°C)

PG-23-205-ON GAS INLET PRESSURE 66 138 0 ÷ +40 -29 ÷ +100 0 ÷ 160 PFR50001000S512 WIKA 233.30
PG-23-215-ON GAS INLET PRESSURE 66 138 0 ÷ +40 -29 ÷ +100 0 ÷ 160 PFR50001000S512 WIKA 233.30
PG-23-225-ON GAS INLET PRESSURE 66 138 0 ÷ +40 -29 ÷ +100 0 ÷ 160 PFR50001000S512 WIKA 233.30

PG-23-203-ON GAS OUTLET PRESSURE 66 138 0 ÷ +40 -29 ÷ +100 0 ÷ 160 PFR50001000S512 WIKA 233.30
PG-23-213-ON GAS OUTLET PRESSURE 66 138 0 ÷ +40 -29 ÷ +100 0 ÷ 160 PFR50001000S512 WIKA 233.30
PG-23-223-ON GAS OUTLET PRESSURE 66 138 0 ÷ +40 -29 ÷ +100 0 ÷ 160 PFR50001000S512 WIKA 233.30

NOTES:
(1) CASE MATERIAL COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(2) ATEX CERTIFICATE REQUIRED
(3) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(4) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR WETTED PARTS
(5) C/W CERTIFICATE OF CALIBRATION
(6) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
(7) AMBIENT TEMEPRATURE: 21 °C to 31 °C
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 18/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

FLANGED DBB MANIFOLD

DATA SHEET
CUSTOMER'S REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA

MANIFOLD

01. Material: 304 SS 316SS/L (1) (2) (3) (4) (5)

Other: Flanged manifold Double Block & Bleed
02. Construction: Drilled Built-Up
Other: pressure rating: 6000 psi
03. Manif. Style: Direct mount
04. Conn. Style: Instrument 1/2"NPT-F Process 1" #900 RF
05. Drain connection 1/4"NPT + plug Rating 6000 psi
06. MFR. & Model No. SIMER
07. PF code PFR50001000S513

note:
(1) DESIGN TEMPERATURE: -29÷+100°C (Operative +40°C) / Ambient conditions: temperature 21°C to 31°C
(2) DESIGN PRESSURE: 138 barg
(3) WHOLE IN AISI316L
(4) SUITABLE FOR C5I ENVIRONMENT AS PER MANUFACTURER STANDARD
(5) MATERIAL CERTIFICATION ACCORDING TO EN10204-3.1 (ISO10474-3.1) AND MANUFACTURER’S TEST REPORT

Rev. TAG Quantity

C MF-009A-ON, MF-009B-ON, MF-009C-ON, MF-005A-ON, MF-005B-ON, MF-005C-ON 6

*images are indicative

 Document classified as: 2 - Company Confidential#

Sheet of Sheets
Company Document ID 351701DIGSF0053 19/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

PRESSURE DIFFERENTIAL GAUGE

DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Type: Direct Rdg 3-15 Ib Receiver 10. Manufacturer WIKA
Other EN 837-1 Model No. 733.14
2. Mounting: 2" Stand pipe Local Flush 11. Press. Element: Diaphragm
3. Dial: Diameter DN 100 (270°) Color Wh.all/bk let.din 6203 Other
4. Case: Cast Iron Aluminum ABS 12. Element Mtl: Bronze Steel 316 SS
Other STAINLESS STEEL (1) (2) (3) (4) (5) (6) (7) Other
5. Ring: Screwed Hinged Slip Std 13. Socket Mtl: Bronze Steel 316 SS
Other Cam ring (bayonet type), natural finish ss Other
6. Blow-Out Protection: None Back Disc 14. Connection: ¼"NPT ½"NPT Other
Solid Front Other IP 65 min. Bottom Back
7. Lens: Glass Plastic 15. Movement: Bronze SS Nylon
8. Options: 2" mount. bracket Material Stainless steel Other Pointer alluminium, black
Snubber 16. Filling fluid Glycerine with Safety plug
Blow out protect. 17. Connections Gage Conn. 2x1/2" G-Female
Pressure Limit Valve 18. Diaphragm Seal YES NO
Movement Damping MFG Type
9. Nominal Accuracy Required ± 1.6% OF FULL SCALE READING Wetted Part Mtl. Other Mtl.
Fill Fluid
Process Conn. Gage Conn.

Pipeline Pipeline Pipeline Permissible Overload

Pipeline SCALE
Operat. Design. Operat. medium capability MANUFACT.
TAG DESCRIPTION Design. Temp. RANGE P.F. CODE
Press. Press. Temp. Temp. either side Model
(°C) (bar)
(barg) (barg) (°C) (°C) (barg)

GAS INLET/OUTLET DIFF.

PDG-23-234-ON 66 138 0 ÷ +40 -29 ÷ +100 0÷1 -20 ÷ +100 250 PFR50001000S515 WIKA 733.14
PRESSURE
GAS INLET/OUTLET DIFF.
PDG-23-244-ON 66 138 0 ÷ +40 -29 ÷ +100 0÷1 -20 ÷ +100 250 PFR50001000S515 WIKA 733.14
PRESSURE
GAS INLET/OUTLET DIFF.
PDG-23-254-ON 66 138 0 ÷ +40 -29 ÷ +100 0÷1 -20 ÷ +100 250 PFR50001000S515 WIKA 733.14
PRESSURE

NOTES:
(1) CASE MATERIAL COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(2) ATEX CERTIFICATE REQUIRED
(3) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(4) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR WETTED PARTS
(5) C/W CERTIFICATE OF CALIBRATION
(6) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
(7) AMBIENT TEMEPRATURE: 21 °C to 31 °C
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 20/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

THREADED 5V MANIFOLD - 6 WAYS

DATA SHEET
CUSTOMER'S REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA

MANIFOLD

01. Material: 304 SS 316SS/L (1) (2) (3) (4) (5)

Other: 5 Valves 6 Ways manifold for 2" pipe mounting
02. Construction: Drilled Built-Up
Other: pressure rating: 6000 psi, packing: PTFE
03. Manif. Style: Direct mounted to instrument
04. Conn. Style: Instrument 1/2"G-Male Process 1/2"NPT-F
05. Drain connection 1/4"G Female Rating 6000 psi
06. MFR. & Model No. SAMI 5350CDADBBAA
07. PF code PFR50001000S516

note:
(1) DESIGN TEMPERATURE: -29÷+100°C (Operative +40°C) / Ambient conditions: temperature 21°C to 31°C
(2) DESIGN PRESSURE: 138 barg
(3) WHOLE IN AISI316L
(4) SUITABLE FOR C5I ENVIRONMENT AS PER MANUFACTURER STANDARD
(5) MATERIAL CERTIFICATION ACCORDING TO EN10204-3.1

Rev. TAG Quantity

C MF-052A-ON, MF-052B-ON, MF-052C-ON 3

*images are indicative

 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 21/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

SECTION 2:
INSTRUMENTATION INCLUDED IN THE FUEL GAS
LINE AND BURNER PACKAGE
 Document classified as: 2 - Company Confidential
#

Sheet of Sheets
Company Document ID 351701DIGSF0053 22/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

PRESSURE GAUGE
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Type: Direct Rdg 3-15 Ib Receiver 10. Manufacturer WIKA
Other EN 837-1 Model No. 233.50.100
2. Mounting: Surface Local Flush 11. Press. Element: Bourdon Bellows
3. Dial: Diameter DN 100 (270°) Color Wh.all/bk let.din 6203 Other
4. Case: Cast Iron Aluminum ABS 12. Element Mtl: Bronze Steel 316 SS
Other STAINLESS STEEL Other
5. Ring: Screwed Hinged Slip Std 13. Socket Mtl: Bronze Steel 316 SS
Other Cam ring (bayonet type), natural finish ss Other
6. Blow-Out Protection: None Back Disc 14. Connection: ¼"NPT ½"NPT Other
Solid Front Other IP 65 min. Bottom Back
7. Lens: Glass Plastic 15. Movement: Bronze SS Nylon
8. Options: Sylphon Material Other Pointer alluminium, black
Snubber 16. Filling fluid Glycerine with Safety plug
Blow out protect. 17. Connections Gage Conn. 1/2" NPT-M
Pressure Limit Valve 18. Diaphragm Seal YES NO
Movement Damping MFG Type
9. Nominal Accuracy Required ± 1.0% OF FULL SCALE READING Wetted Pert Mtl. Other Mtl.
Fill Fluid
Process Conn. Gage Conn.
Line Line PSV Additional
Operat. Operat. Design.
Design. present SCALE RANGE Over- MANUFACT.
TAG DESCRIPTION Press. Temp. Temp. P.F. CODE
Press. set@ (barg) pressure Model
(barg) (°C) (°C)
(barg) (barg) protection
PG-23-206-
FUEL GAS INLET PRESSURE 10 12 No +20 -29 ÷ +80 0 ÷ 16 No WIKA 233.50.100
ON
PG-23-216-
FUEL GAS INLET PRESSURE 10 12 No +20 -29 ÷ +80 0 ÷ 16 No WIKA 233.50.100
ON
PG-23-226-
FUEL GAS INLET PRESSURE 10 12 No +20 -29 ÷ +80 0 ÷ 16 No WIKA 233.50.100
ON

PG-23-207- FUEL GAS PRESSURE AFTER Yes see note

0,6 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PCV 3,5 (8)
PG-23-217- FUEL GAS PRESSURE AFTER Yes see note
0,6 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PCV 3,5 (8)
PG-23-227- FUEL GAS PRESSURE AFTER Yes see note
0,6 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PCV 3,5 (8)

PG-23-204- MAIN BURNER GAS Yes see note

0,25 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PRESSURE 3,5 (8)
PG-23-214- MAIN BURNER GAS Yes see note
0,25 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PRESSURE 3,5 (8)
PG-23-234- MAIN BURNER GAS Yes see note
0,25 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PRESSURE 3,5 (8)

PG-23-237- PILOT BURNER GAS Yes see note

0,6 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PRESSURE 3,5 (8)
PG-23-247- PILOT BURNER GAS Yes see note
0,6 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PRESSURE 3,5 (8)
PG-23-257- PILOT BURNER GAS Yes see note
0,6 12 +15 -29 ÷ +80 0÷1 233.50.100.SVP 5
ON PRESSURE 3,5 (8)

NOTES:
(1) CASE MATERIAL COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(2) ATEX CERTIFICATE REQUIRED
(3) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(4) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR WETTED PARTS
(5) C/W CERTIFICATE OF CALIBRATION
(6) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
(7) AMBIENT TEMEPRATURE: 21 °C to 31 °C
(8) THE PRESSURE GAUGE SHALL BE DESIGNED TO WITHSTAND A STATIC PRESSURE OF 4 BARG, OTHERWISE AN OVERPRESSURE DEVICE SHALL BE
PROVIDED FOR EACH MANOMETER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 23/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

PRESSURE SWITCH
DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
PROJECT (TTIP)
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
GENERAL SWITCH
1. Type: Press Vacuum 8. Type: Mercury Snap
Comp. Diff. Press. Other
2. Setting: Set in Field Factory Set 9. Quantity: Single Dual
Internal External Dial 10. Form: SPST SPDT DPDT
3. Dead Band: Fixed Adj Min Other
ELEMENT 11. Rating: 2 Amps 30 Vdc Hz
4. Type: Diaphragm Bourdon Bellows Other
Other 12. Load: Inductive Non-Inductive
5. Material: Bronze 316 SS Alloy St. 13. Enclosure: General Purpose Weather proof
Other None Expl. Proof Ex-d IIB T4 - min. IP65 (1)
6. Connection: MFR STD Other Size 1/2" NPT-F 14. Conduit Connection: MFR STD Other M20
Bottom Back 15. Other: SIL 2, SS 316 HOUSING, SEE NOTES BELOW
7. Mounting: Local Surface Flush Manufacturer BETA
Model No. W3-P502H-S2N-B1-N1-V / W3-P404M-S2N-B1-N1-V

Operat. Design. Operat. Design. Adjustm. Max static

Set at MANUFACT.
TAG DESCRIPTION Press. Press. Temp. Temp. Range pressure P.F. CODE
(barg) Model
(barg) (barg) (°C) (°C) (barg) (barg)

VERY LOW
0,35
PSLL-23-203-ON PRESSURE 0,5 12 +15 -29 ÷ +80 0,3-1.6 200 W8-P502H-S2N-B1-N1-V
Decreasing
SWITCH
VERY LOW
0,35
PSLL-23-213-ON PRESSURE 0,5 12 +15 -29 ÷ +80 0,3-1.6 200 W8-P502H-S2N-B1-N1-V
Decreasing
SWITCH
VERY LOW
0,35
PSLL-23-223-ON PRESSURE 0,5 12 +15 -29 ÷ +80 0,3-1.6 200 W8-P502H-S2N-B1-N1-V
Decreasing
SWITCH

VERY HIGH
0,287
PSHH-23-201-ON PRESSURE 0,5 12 +15 -29 ÷ +80 0,1-0,95 125 W8-P404M-S2N-B1-N1-V
Increasing
SWITCH
VERY HIGH
0,287
PSHH-23-211-ON PRESSURE 0,5 12 +15 -29 ÷ +80 0,1-0,95 125 W8-P404M-S2N-B1-N1-V
Increasing
SWITCH
VERY HIGH
0,287
PSHH-23-221-ON PRESSURE 0,5 12 +15 -29 ÷ +80 0,1-0,95 125 W8-P404M-S2N-B1-N1-V
Increasing
SWITCH

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR WETTED PARTS
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 24/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

DIFFERENTIAL PRESSURE SWITCH

DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
GENERAL SWITCH
1. Type: Press Vacuum 8. Type: Mercury Snap
Comp. Diff. Press. Other
2. Setting: Set in Field Factory Set 9. Quantity: Single Dual
Internal External Dial 10. Form: SPST SPDT DPDT
3. Dead Band: Fixed Adj Min Other
ELEMENT 11. Rating: 5 Amps 30 Vdc Hz
4. Type: Diaphragm Bourdon Bellows Other
Other 12. Load: Inductive Non-Inductive
5. Material: Bronze 316 SS Alloy St. 13. Enclosure: General Purpose Weather proof
Other Viton Diaphragm None Expl. Proof Ex-d IIB T4 - IP65 min. (1)
6. Connection: MFR STD Other Size 1/8" NPT-F 14. Conduit Connection: MFR STD Other 1/2"NPT – F adapters
Counterp. Back 15. Other: SIL 2 , SEE NOTES BELOW
7. Mounting: Local Surface Flush Manufacturer UNITED ELECTRIC CONTROLS
Model No. 12SHSNK1*M480*M201*M423SS

Operat. Design. Operat. Design. Adjustm.

Set at MANUFACT.
TAG DESCRIPTION Press. Press. Temp. Temp. Range P.F. CODE
(mbar) Model
(bar) (barg) (°C) (°C) (mbar)

UE
10
PDSLL-23-202-ON VERY LOW PESSURE SWITCH 0,05 0,15 +21÷+31 -29 ÷ +80 +1,7/+25 12SHSNK1*M480*M201
Decreasing *M423SS

UE
10
PDSLL-23-212-ON VERY LOW PESSURE SWITCH 0,05 0,15 +21÷+31 -29 ÷ +80 +1,7/+25 12SHSNK1*M480*M201
Decreasing *M423SS

UE
10
PDSLL-23-222-ON VERY LOW PESSURE SWITCH 0,05 0,15 +21÷+31 -29 ÷ +80 +1,7/+25 12SHSNK1*M480*M201
Decreasing *M423SS

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR WETTED PARTS
(6) C/W CERTIFICATE OF CALIBRATION
(7) C/W SIL CERTIFICATE
(8) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 25/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

FLANGED DBB MANIFOLD

DATA SHEET
CUSTOMER'S REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA

MANIFOLD

01. Material: 304 SS 316SS/L (1) (2) (3) (4) (5)

Other: Flanged manifold Double Block & Bleed
02. Construction: Drilled Built-Up
Other: pressure rating: 3000 psi
03. Manif. Style: Direct mount
04. Conn. Style: Instrument 1/2"NPT-F Process 1" #150 RF
05. Drain connection 1/4"NPT + plug Rating 3000 psi
06. MFR. & Model No. SIMER

note:
(1) DESIGN TEMPERATURE: -29÷+80°C (Operative +20°C) / Ambient conditions: temperature 21°C to 31°C
(2) DESIGN PRESSURE: 12 barg
(3) WHOLE IN AISI316L
(4) SUITABLE FOR C5I ENVIRONMENT AS PER MANUFACTURER STANDARD
(5) MATERIAL CERTIFICATION ACCORDING TO EN10204-3.1 (ISO10474-3.1) AND MANUFACTURER’S TEST REPORT

Rev. TAG Quantity

C MF-015A-ON, MF-015B-ON, MF-015C-ON, MF-021A-ON, MF-021B-ON, MF-021C-ON, MF-022A-ON, MF-022B-ON, MF-022C-ON, MF-024A-ON, MF-024B-ON, 15
MF-024C-ON, MF-025A-ON, MF-025B-ON, MF-025C-ON

*images are indicative

 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 26/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

THREADED DBB 3V MANIFOLD

DATA SHEET
CUSTOMER'S REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA

MANIFOLD

01. Material: 304 SS 316SS/L (1) (2) (3) (4) (5)

Other: 3 Valves manifold Double Block & Bleed
02. Construction: Drilled Built-Up
Other: pressure rating: 3000 psi
03. Manif. Style: Direct mount
04. Conn. Style: Instrument: 1/2"NPT-F Process: 1/2" NPT-M
05. Drain connection 1/4"NPT + plug Rating 3000 psi
06. MFR. & Model No. SIMER

note:
(1) DESIGN TEMPERATURE: -29÷+80°C (Operative +20°C) / Ambient conditions: temperature 21°C to 31°C
(2) DESIGN PRESSURE: 12 barg
(3) WHOLE IN AISI316L
(4) SUITABLE FOR C5I ENVIRONMENT AS PER MANUFACTURER STANDARD
(5) MATERIAL CERTIFICATION ACCORDING TO EN10204-3.1 (ISO10474-3.1) AND MANUFACTURER’S TEST REPORT

Rev. TAG Quantity Notes

used only for PG-23-237-ON, PG-23-247-ON,

C MF-026A-ON, MF-026B-ON, MF-026C-ON 3
PG-23-257-ON

*images are indicative

 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 27/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

THREADED 5V MANIFOLD - 6 WAYS

DATA SHEET
CUSTOMER'S REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 05/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA

MANIFOLD

01. Material: 304 SS 316SS/L (1) (2) (3) (4) (5)

Other: 5 Valves manifold - 6 ways
02. Construction: Drilled Built-Up
Other: pressure rating: 3000 psi
03. Manif. Style: Direct mount
04. Conn. Style: Instrument: 1/2"NPT-F Process: 1/2" NPT-F
05. Drain connection 1/4"NPT + plug Rating 3000 psi
06. MFR. & Model No. V-LOCK S6L-5VMR-A

note:
(1) DESIGN TEMPERATURE: -29÷+80°C (Operative +20°C) / Ambient conditions: temperature 21°C to 31°C
(2) DESIGN PRESSURE: 0,1 barg
(3) WHOLE IN AISI316L
(4) SUITABLE FOR C5I ENVIRONMENT AS PER MANUFACTURER STANDARD
(5) MATERIAL CERTIFICATION ACCORDING TO EN10204-3.1 (ISO10474-3.1) AND MANUFACTURER’S TEST REPORT

Rev. TAG Quantity Notes

used only for PDSLL-23-202-ON, PDSLL-23-

C MF-044A-ON, MF-044B-ON, MF-044C-ON 3
212-ON, PDSLL-23-222-ON

*images are indicative

 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 28/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

SOLENOID VALVES
DATA SHEET
CUSTOMER'S REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 06/12/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA

SDY-23-212-ON, SDY-23-222-ON, SDY-23-211-ON, SDY-23-221-ON, SDY-23-208-ON, SDY-23-218-ON,

1 Tag Number
SDY-23-232-ON SDY-23-231-ON SDY-23-228-ON
SDY-23-213-ON, SDY-23-223-ON, SDY-23-210-ON, SDY-23-220-ON,
SDY-23-233-ON SDY-23-230-ON
2 Service PILOT GAS LINE VENT PILOT GAS LINE BURNER LINE VALVE ACTUATORS
3 Line N° / Vessel N° - - -
4 Quantity 3 6 6
5 Type TWO WAYS TWO WAYS THREE WAYS
6 Size - Body/Port 2 x 1/2" NPT-F 2 x 1/2" NPT-F 3 x 1/4" NPT-F
7 Rating & Type Conn. - - -
8 Material - Body AISI316 AISI316 AISI316
9 Material - Seat NBR NBR NBR
10 Material - Diaphragm
VALVE/BODY
11 Operation Direct/Pilot DIRECT DIRECT DIRECT
12 Packless or Type Packed
13 Manual Re-Set NO NO NO
14 Manual Operator
15 Orifice Diameter VENDOR STD VENDOR STD VENDOR STD
16
17 2-Way Valve Opens/Close YES YES NO
18 3-Ways NO NO YES
19 Vent Port Opens/Close - - OPENED
20 Press Port Opens/Close OPENED CLOSED CLOSED
WHEN
21 4-Ways
DE-ENERGIZED
22 Press to Cyl. 1/Cyl. 2
23 Exh. from Cyl. 1/Cyl. 2
24
25
26 Enclosure Explos. Proof Ex-d IIB T4 Explos. Proof Ex-d IIB T4 Explos. Proof Ex-d IIB T4
27 Voltage/Hz 24VDC 24VDC 24VDC
28 Insulation Class
SOLENOID 29 Single or Double Coil SINGLE SINGLE SINGLE
30 Excitation Permanent-Temporary TEMPORARY TEMPORARY TEMPORARY
31 Electrical Connection JUNCTION BOX (M20) JUNCTION BOX (M20) JUNCTION BOX (M20)
32 Protection class IP 66 IP 66 IP 66
33 Fluid NATURAL GAS NATURAL GAS NATURAL GAS
34 Qty. Maximum
35 Oper. Diff. Min/Max 0 - 1 barg 0 - 1 barg 0 - 6 barg
36 Design Pressure 12 barg 12 barg 12 barg
SERVICE
37 Temp. Norm/Max.
CONDITIONS
38 Oper. Sp. Gr.
39 Oper. Viscosity
40 Required Cv
41 Valve Cv
42 Pressure Regulator NO NO NO
43 Type
OPTION 44 Operating Pressure
45 Limit switches YES, Open valve position YES, Closed valve position NO
46 SIL level SIL 2 SIL 2 SIL 2
47 Manufacturer MAXSEAL MAXSEAL MAXSEAL
48 Model Number ICO4S ICO4S ICO3S
NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR
HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING AND MATERIALS COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) IEC-EX CERTIFICATE REQUIRED
(4) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(5) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR WETTED PARTS
(6) C/W SIL CERTIFICATE
(7) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 29/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

BLOWER TEMPERATURE TRANSMITTER

DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: BLOWER SAFETY
2. Function Record Indicate Control Blind Trans
Other
3. Case MFR STD Nom. Size 95x109x109 Color: MFR STD Other
4. Mounting Flush Surface Yoke Other
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class IEC 60751:2008
For Use In Intrin. Safe System Other Ex d IIC Gb - Ex tb IIC Db
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other 8-30 VDC
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other Smart type (Hart Protocol)
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range Set at
Overrange protection to
20. Bulb Type Pt100 Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter 6 mm Lenght 100-150 mm Insertion
Conn: 1/4"GAS-M Lenght m Above Below Instr.
21. Capillary MFR STD Lenght Mtl. Armor
22. Well Mtl. SS 316 Insertion 100 - 150 mm Lag Ext. VENDOR STD Conn 2"ANSI 150 RF
Constr: Drilled Built-Up Other TAPERED - 1/2" NPT INSTRUM
23. Alarm Switches Quantity Form Rating
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other 2-wire trasmitter with HART protocol

26. MFR & Model No. COMITES R1B-1-B-3F-60-X-100-D-0-G2-0-TT - R1B-1-B-3F-60-X-150-D-0-G2-0-TT

DESCRIPTION Operat. Design. Operat. Design.
Span set Insertion TAHH
TAG Press. Press. Temp. Temp. P.F. CODE MANUFACT. Model
(°C) Lenght (°C)
(barg) (barg) (°C) (°C)

COMITES
TT-23-237A-ON BLOWER CASE TEMP. KD2301A 0,05 0,15 +21÷+31 100 -50÷150 °C 100 100
R1B-1-B-3F-60-X-100
COMITES
TT-23-237B-ON BLOWER BEARINGS TEMP. KD2301A 0,05 0,15 +21÷+31 100 -50÷150 °C 150 100
R1B-1-B-3F-60-X-150
COMITES
TT-23-237C-ON BLOWER BEARINGS TEMP. KD2301A 0,05 0,15 +21÷+31 100 -50÷150 °C 150 100
R1B-1-B-3F-60-X-150

COMITES
TT-23-247A-ON BLOWER CASE TEMP. KD2301B 0,05 0,15 +21÷+31 100 -50÷150 °C 100 100
R1B-1-B-3F-60-X-100
COMITES
TT-23-247B-ON BLOWER BEARINGS TEMP. KD2301B 0,05 0,15 +21÷+31 100 -50÷150 °C 150 100
R1B-1-B-3F-60-X-150
COMITES
TT-23-247C-ON BLOWER BEARINGS TEMP. KD2301B 0,05 0,15 +21÷+31 100 -50÷150 °C 150 100
R1B-1-B-3F-60-X-150

COMITES
TT-23-257A-ON BLOWER CASE TEMP. KD2301C 0,05 0,15 +21÷+31 100 -50÷150 °C 100 100
R1B-1-B-3F-60-X-100
COMITES
TT-23-257B-ON BLOWER BEARINGS TEMP. KD2301C 0,05 0,15 +21÷+31 100 -50÷150 °C 150 100
R1B-1-B-3F-60-X-150
COMITES
TT-23-257C-ON BLOWER BEARINGS TEMP. KD2301C 0,05 0,15 +21÷+31 100 -50÷150 °C 150 100
R1B-1-B-3F-60-X-150

NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(4) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(5) C/W CERTIFICATE OF CALIBRATION
(6) C/W SIL CERTIFICATE
(7) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER
 Document classified as: 2 - Company Confidential #

Sheet of Sheets
Company Document ID 351701DIGSF0053 30/30
Contractor Document ID 24640401MIIBF0053 Validity Status Revision Number

Vendor Document ID 50001000A0IDS303EN EX-CO 00

BLOWER VIBRATION TRANSMITTER

DATA SHEET
PROJECT REF.: REV. DATE DESCRIPTION BY CHK'D APPR.
TAKORADI-TEMA INTERCONNECTION
A 10/11/2017 FIRST ISSUE F.B. D.R. A.S.
PROJECT (TTIP)
DOCUMENT TITLE : B 19/12/2017 FIRST REVISION F.B. D.R. A.S.
INSTRUMENTS SPECIFICATIONS AND
C 16/02/2018 SECOND REVISION F.B. D.R. A.S.
DATASHEETS
LOCATION : D 31/05/2018 APPROVED FOR CONSTRUCTION F.B. D.R. A.S.
GHANA
1. Tag No. See below Service: BLOWER SAFETY
2. Function Record Indicate Control Blind Trans
Other
3. Case MFR STD Nom. Size 89,5x66x151 Color: MFR STD Other
4. Mounting Flush Surface Yoke Other M8x1,25
5. Enclosure Class General Purpose Weather Proof Expl. Proof Ex-d Class IP65
For Use In Intrin. Safe System Other Ex 2GD Ex d IIC T6 Gb Ex tb IIIC T85°C Db (ATEX)
GENERAL
6. Power Supply 110V 60Hz 220V 50Hz 24Vdc Other CURRENT LOOP
7. Chart Strip Roll Fold Circular Time Marks
Range Number
8. Chart Drive Speed Power
9. Scales Type 0-20 mm/s RMS
Range 1 2 3 4
10. Transmitter 4÷20 mA 10÷50 mA 3÷15 psig Other
XMTR
Output For Receiver See Spec. Sheet
11. Control Modes P = Prop (Gain), I = Integral (AutoReset), D = Derivate (Rate)
Sub: s = Slow f = Fast
P PI PD PID If Df Is Ds
Other
CONTROLLER 12. Action On meas. Increase output: Increases Decreases
13. Auto-Man Switch None MFR STD Other
14. Set Point Adj. Manual External Remote Other
15. Manual Reg. None MFR STD Other
16. Output 4÷20 mA 10÷50 mA 3÷15 psig Other
17. Fill SAMA Class Compensation
18. Process Data Temp: Normal Max Max Press.
19. Range Fixed Adj. Range Set at
Overrange protection to
20. Bulb Type Mtl. Extension: Lenght Type
ELEMENT
Size: Diameter Lenght Insertion
Conn: Lenght m Above Below Instr.
21. Capillary MFR STD Lenght Mtl. Armor
22. Well Mtl. Insertion Lag Ext. Conn
Constr: Drilled Built-Up Other
23. Alarm Switches Quantity Form Rating
24. Function Temp Deviation Contacts to On Temp Increase
25. Options Filter Reg Supply Gage Output Gage Charts
OPTIONS Other

26. MFR & Model No. TR-I /1/1/2/0

Operat. Design. Operat. Design.

Span set MANUFACT.
TAG DESCRIPTION Press. Press. Temp. Temp. VAHH (mm/s) P.F. CODE
(mm/s) Model
(barg) (barg) (°C) (°C)

CEMB
VT-23-201A-ON BLOWER VIBRATION TRANSM. KD2301A 0,05 0,15 +21÷+31 100 0÷20 11 TR-I /1/1/2/0
CEMB
VT-23-201B-ON BLOWER VIBRATION TRANSM. KD2301A 0,05 0,15 +21÷+31 100 0÷20 11 TR-I /1/1/2/0

CEMB
VT-23-211A-ON BLOWER VIBRATION TRANSM. KD2301A 0,05 0,15 +21÷+31 100 0÷20 11 TR-I /1/1/2/0
CEMB
VT-23-211B-ON BLOWER VIBRATION TRANSM. KD2301A 0,05 0,15 +21÷+31 100 0÷20 11 TR-I /1/1/2/0

CEMB
VT-23-221A-ON BLOWER VIBRATION TRANSM. KD2301A 0,05 0,15 +21÷+31 100 0÷20 11 TR-I /1/1/2/0
CEMB
VT-23-221B-ON BLOWER VIBRATION TRANSM. KD2301A 0,05 0,15 +21÷+31 100 0÷20 11 TR-I /1/1/2/0
NOTES:
(1) EQUIMPENT SHALL BE TROPICALIZED IN COMPLIANCE WITH THE ATTACHED ENI SPEC. 05497.VAR.ELE.STD_05 FOR HOT WET TROPICAL CLIMATE
(2) STANDARD MANUFACTURER PAINTING COMPATIBLE WITH MARINE C5I ENVIRONMENT (ISO 12944)
(3) EQUIMPENT SHALL BE TESTED IN COMPLIANCE WITH ATTACHED INSPECTION DATASHEET 351700BMGB30200 (pages 10 to 13)
(4) C/W EN10204 3.1 CERTIFICATE OF MATERIALS FOR THERMOWELL
(5) C/W CERTIFICATE OF CALIBRATION
(6) C/W SIL CERTIFICATE
(7) C/W TAG PLATE IN SS WITH ENGRAVED TAG NUMBER