深圳市星科创科技有限公司

Shenzhen XingKeChuang Technology Co., Ltd.

XKC-Y26-V-V1.6

Non-contact liquid level sensor instruction manual

(Intelligent externally attached liquid level detection products)

Model XKC-Y26-V

Table of Contents
1st. Overview .................................................................................................................................................................................... 2
2nd.Product Features ...................................................................................................................................................................... 2
3rd.Product Applications ................................................................................................................................................................ 2
4th.Product parameter .................................................................................................................................................................... 3
5th.product selection........................................................................................................................................................................ 3
6th. Clearance requirements........................................................................................................................................................... 3
7th. Installation method .................................................................................................................................................................. 4
8th. Sensitivity adjustment: ............................................................................................................................................................ 6
9th. Product size and physical map................................................................................................................................................ 7
10th.Y26 wiring diagram of various models ................................................................................................................................. 9
11th.Other matters needing attention .......................................................................................................................................... 10
12th.Troubleshooting:.................................................................................................................................................................... 10
13th.Product warranty terms and instructions .......................................................................................................................... 10
14th. Manual version ..................................................................................................................................................................... 12

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
1 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
1st. Overview

The intelligent non-contact liquid level sensor (hereinafter referred to as the liquid level sensor) adopts advanced signal
processing technology and high-speed signal processing chip, which breaks through the influence of container wall
thickness and realizes a true non-contact type of liquid level height in a closed container Detection. The liquid level
sensor (probe) is installed on the upper and lower sides of the outer wall of the container to be measured (the high and low
levels of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does
not affect production. It can detect the liquid level of various liquid toxic substances, strong acids, strong alkalis and
various liquids in high-pressure airtight containers. The liquid level sensor has no special requirements for the material of
the liquid medium and the container, and can be widely used. XKC-Y26-XXX series products are specially developed for
non-metallic pipeline liquid level detection. This series of liquid level sensors is divided into three types:

Serial number type number signal interface

1 XKC-Y26-V High and low level output interface

2 XKC-Y26-NPN NPN output interface

3 XKC-Y26-PNP PNP output interface

2nd.Product Features

1. XKC-Y26-XXX non-contact liquid level sensor is suitable for all kinds of non-metal containers. The product detects
the liquid through the detection signal through the non-metal container and the outer wall of the pipeline, without direct
contact with the liquid. It is corroded by strong acids and alkalis and other corrosive liquids, and is not affected by scale
or other debris, and it can be completed to detect whether there is liquid inside the container or pipeline.
2. Product design intelligent liquid level reference adjustment and liquid level memory function, liquid level status
display mode, can realize multi-point series connection control mode. It can support high and low level output, NPN, PNP
signal output control (please refer to the manufacturer's instructions when selecting the model).
3. The detection liquid level is accurate and stable, and cold, hot and boiling liquids can be detected.
4. Pure electronic circuit structure, non-mechanical working mode, stable performance and long lasting service life.
5. High stability, high sensitivity, strong anti-interference ability, free from external electromagnetic interference, special
treatment for power frequency interference and common mode interference, to be compatible with all 5~24V power
adapters on the market.
6. Wide range of application, strong sensing ability, can penetrate and detect the liquid level in various non-metallic
containers and pipes, such as plastic, glass, ceramics and other containers. The thickness of the sensing pipe wall can
reach 20mm; it can be applied to various curved surfaces. , Arc, cylindrical and other irregular containers or pipeline
liquid level detection.
7. Wide voltage range (5~24V), suitable for connecting various circuits and product applications
3rd.Product Applications

The intelligent non-contact liquid level sensor uses the inductive capacitance of water to detect the presence of liquid.
When there is no liquid close to the sensor, the sensor has a certain static capacitance to the ground due to the presence of
distributed capacitance on the sensor. When the liquid level is slow When the sensor is slowly raised, the parasitic
Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com
Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
2 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
capacitance of the liquid will be coupled to the static capacitance of the sensor, making the capacitance value of the
sensor larger. The changed capacitance signal is then input to the control IC for signal conversion, and the changed
capacitance is converted into a circuit signal When the amount of change exceeds a certain threshold, it is judged that the
liquid level has reached the sensing point.

4th.Product parameter

Project name Parameters

Product model XKC-Y26-V
Supply voltage（Vin） （DC 5-24V）
Output mode High and low level
electric current 5mA
The output voltage（high pulse） Vin
The output voltage（low level） 0V
The output current ≤100mA
Response time 500mS
Working temperature -20~105℃
Sensor sensitivity Outer diameter of pipe Sense container wall or tube wall
D(mm) thickness L(mm)
D≥100 20 ±2
100>D≥80 15 ±2
80>D≥60 12 ±1.5
60>D≥40 7 ±1.0
40>D≥30 5 ±1.0
30>D≥20 3 ±1.0
20>D≥10 1.5 ±0.5
Applicable pipe diameter range ≥10mm

Liquid level accuracy ±1.5mm

humidity 5%~100%
Material PC V0 Fireproof material
Waterproof performance IP67
Safety standard certification CE
Environmental protection certification ROHS-2.0

5th.product selection

High and low level output interface — Model: XKC-Y26-V (DC 5-24V)
6th. Clearance requirements
Requirements for the clearance between the contact surface of the sensor (or probe) and the outer wall of the container
The contact surface of the sensor (or probe) and the outer wall of the container should be tightly pasted with AB or other
solid-resistant glue. If there are special requirements, the gap should be less than 0.5mm, preferably no gap, otherwise it

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
3 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
may affect the measurement accuracy .

7th. Installation method

Install into a flat cistern as shown in the figure below

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
4 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.

Install to the non-metal water pipe type as shown below

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
5 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.

The height of the sensed liquid level is related to the sensitivity of the sensor. The higher the sensitivity, the lower the
sensed liquid level
Note: The liquid level is sensed in the upper and lower edges of the sensor, which is normal.
The induction sheet can be tightly attached to the pipe with strong glue, or it can be tightened with the pipe with a nylon
cable tie. There should be no metal parts in the part where the probe is installed, so as not to affect the detection. Pipes
made of non-metallic materials with a smooth surface, uniform thickness, tight material, and good insulation performance;
such as glass pipes, plastic pipes, PC/PVC/PPR pipes, non-absorbent ceramic pipes, acrylic pipes, rubber pipes, etc. or
their composites Pipes made of materials.
8th. Sensitivity adjustment:
If the non-contact liquid level sensor cannot detect or the detected liquid level deviates from the Y26 sensor, The
sensitivity knob can be adjusted with a small screwdriver. Setting method:
1. Turn counterclockwise to increase sensitivity.
2. Turn clockwise to lower the sensitivity.

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
6 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.

9th. Product size and physical map

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
7 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
8 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
10th.Y26 wiring diagram of various models

High and low level output drive small electric relay (coil current ≤100mA) Product Applications:
1.When the black line is suspended, it is positive output:
When liquid is sensed, the transistor cuts off and outputs a high level, and the relay does not pull in when it is powered
off;
When no liquid is sensed, the transistor turns on and outputs a low level, and the relay is energized and closed.
2.When the black wire is grounded (connected to the negative pole of the power supply 0V), it is a reverse output:
When liquid is sensed, the transistor turns on and outputs a low level, and the relay is energized and closed;
When no liquid is sensed, the transistor cuts off and outputs a high level, and the relay does not pull in when it is powered
off.

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
9 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.

11th.Other matters needing attention

(1) The viscosity of the measured liquid medium
When the dynamic viscosity is less than 10mPaS, it is measured normally. 10mPaS<dynamic viscosity<30mPaS may
affect the detection. When the dynamic viscosity is greater than 30mPaS, it cannot be measured because a large amount of
liquid adheres to the container wall.
(2) Note: As the temperature increases, the viscosity decreases, and most high-viscosity liquids are more affected by
temperature. Therefore, pay attention to the influence of liquid temperature when measuring viscous liquids.
(3) Pay attention to keeping the level gauge clean, try to prevent corrosion and avoid violent collisions and blows from
other objects.
(4) During outdoor installation, avoid direct sunlight and rainwater directly flowing to the main body of the level gauge,
and keep away from high heat sources and pay attention to ventilation. If the ambient temperature exceeds the rated
temperature, corresponding cooling protection measures should be taken.
(5) When the ambient temperature is lower than the normal operating temperature range of the level gauge, an instrument
protection box or other protective rain cap devices can be used for antifreeze protection, and pay attention to keeping the
level gauge dry. The sensor should be regularly maintained and inspected. (The detection time interval is determined by
the use unit according to the specific situation).
12th.Troubleshooting:

Fault status Analyze the reasons Problem solving measures

After the liquid level sensor is ①The power cord is not connected Check and connect the power
energized, there is no response ② The positive and negative ends of Correct wiring
(the indicator light does not the power cord are reversed
light when the water level ③The power module is damaged Replace the circuit board where the
reaches the sensing point, and power module is located
the sensitivity adjustment has ④Sensitivity is too low Adjust the sensitivity to the
no response) appropriate gear
The indicator light keeps on ①Sensitivity grade is too high Adjust the sensitivity to the
appropriate grade
②The initialization parameters are Return to the factory to reinitialize
abnormally modified
③The sensor has debris or other metal Clean up debris and keep a certain
parts close to it distance from metal parts

13th.Product warranty terms and instructions

(A) .Warranty service
1. Warranty period maintenance: from the date of purchase, the product host has a one-year free warranty. The company
has the right to decide to repair or replace the faulty part. If it is replaced, the replacement part may be a new device or a
repair product of the same category, function, and quality. The replaced faulty part belongs to the company; the product

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
10 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
Resale and repair do not affect the warranty period. Products that have been repaired or replaced continue to enjoy the
original remaining warranty period service. If the warranty period is less than three months after the repair, the repaired or
replaced part shall be shipped from the date of delivery Warranty for three months; all products of the company are
guaranteed for repair.
2. Loss upon arrival (DOA) replacement: From the day of purchase, you can enjoy a free replacement service within 7
days. Products with the following problems are defined as DOA equipment: the packing and packing list do not match
after the first unpacking of the product; some or all of the components cannot be used normally after the first unpacking
of the product (surface scratches or other things that do not affect the function of the device) Defects are not included);
other hardware failures identified by our company’s engineers remotely or locally.
(B). Applicable limitations of warranty
For the following situations, the company does not assume warranty responsibility:
1. The product is out of warranty; the surface of the product is fragile and damaged; the appearance of the product is
seriously damaged, installation/use in abnormal environment, unauthorized disassembly and repair/modification, external
power supply damage and other abnormal damage;
2. Damage caused by incorrect installation and use of the product by the user not following the requirements of the
manual;
3. Damage caused by natural disasters and human negligence (fire, lightning, flooding, impact, etc.).
(C) .Accessories and consumables are not covered by the warranty.
(D) .Non-free warranty service
Within two years of product purchase, for non-warranty product (including components) failures and damages, you can
choose paid maintenance services (free labor costs), and we will charge the transportation cost of repairing parts and
accessories according to the actual situation.
(E). Ways to obtain warranty service
It is recommended that you contact the dealer who purchased this product to obtain the warranty service. For the
warranty, please present a valid warranty card (the dealer’s stamp is required to take effect) or the purchase
invoice/receipt: if you can’t show it, the product’s free warranty period 12 months from the product shipment date, and
the latest DOA application deadline is 7 days from the product shipment date.
(F). Statement
1. The copyright of this manual belongs to Shenzhen Xingkechuang Technology Co., Ltd. (Xingkechuang) and its
authorized licensors. Shenzhen Xingkechuang Technology Co., Ltd. (Xingkechuang) reserves all rights.
2. Without the written permission of the company, no unit or individual may excerpt or copy part or all of the contents of
this manual, and shall not spread it in any form.
3. The customer recognizes that the purpose of the design and production of the company's products does not involve use
in products related to life support or other systems or products used in other dangerous activities or environments.
Personal injury or death, property or environmental damage due to product failure (collectively referred to as high-risk
activities). The company's products are artificially used in high-risk activities, and the company does not guarantee it and
is not liable to customers or third parties.
4. Due to product version upgrades or other reasons, the contents of this manual may change. Xingkechuang reserves the
right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide.

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
11 / 12
 深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
Xingkechuang makes every effort to provide accurate information in this manual. However, Xingkechuang does not
guarantee that the contents of the manual are completely free of errors. All statements, information and suggestions in this
manual do not constitute any express or Implied guarantee.
5. Not all models are available in all countries/regions
Please keep this manual properly. Before using the product, please read this manual carefully. When using the product,
please be sure to operate in accordance with this manual. The company is not responsible for injuries and accidents
caused by operations that do not follow this manual.
(G).Environmental protection This product meets the design requirements for environmental protection.The storage, use
and disposal should comply with relevant national laws and regulations.Seek to proceed.

14th. Manual version

Version Release date

V16 September 28, 2020

Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com

Address: 11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
12 / 12