Memmert CO2-incubator ICO105 EN

Product specification
CO2 incubator
ICO105
Safety at all times: High-end functions for

the protection of cell cultures, bacteria
cultures or tissue cultures.
On this page, you can find all the essential technical data on the Memmert CO2 incubator ICO. Our customer
relations team will be pleased to help if you want further information. If you should require a customised special
solution, please contact our technical specialists at sales@memmert.com.
Page 1/4 | 02.01.2023 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail info@memmert.com | 0
DS_Memmert CO2 incubator ICO105 - en
Temperature
Working-temperature range 5 °C above ambient temperature up to +50 °C
Standard sterilisation programme: 60 minutes at 180°C (without removing the sensors)
Setting temperature range +18 to +50 °C
Setting accuracy 0.1 °C

temperature
Temperature sensor 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an
error
Temperature variation in at + 37 °C +/- 0.3 K

chamber
Temperature fluctuations at 37 °C +/- 0.1 K

with time
Humidity
Humidity control (standard) Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element
limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %
Setting accuracy humidity 0.5 % rh
Setting range active 40 to 97 % rh and rh-Off

humidity control (with
option K7)
Control of standard components

CO2 control Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic
fault indication, barometric pressure compensation
Adjustment range 0 to 20 % CO2

CO2
Setting accuracy 0,1%

CO2
Variation in time +/- 0.2 % CO2

CO2
Adjustment range 1 to 20 % O2
O2
Setting accuracy 0.1 % O2

O2
Control technology
ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition
TFT-colour displays.
Language setting German, English, Spanish, French, Polish, Czech, Hungarian
Function SetpointWAIT the process time does not start until the set temperature is reached
Adjustable parameters temperature (Celsius or Fahrenheit), CO2, programme time, time zones, summertime/wintertime
Communication
Interface Ethernet LAN, USB
Documentation programme stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programmes
via Ethernet interface or USB port
Safety
AutoSAFETY additionally integrated over- and undertemperature protection "ASF", automatically following the
setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating
function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic system integral fault diagnostics for temperature and CO2
Alarm visual and acoustic
Heating concept
6 sides large-area multi-function heating system on four sides with additional door and back heating to avoid
condensation
Standard equipment
Works calibation certificate Works calibration certificate at +37 °C, 5 % CO2 and 90 % rh (requires option K7); standard equipment
for units with active humidity control
Works calibation certificate Works calibration certificate at +37 °C, 5 % CO2, 90 % rh and 10 % O2 (requires option K7 and option
T6); standard equipment for units with O2 control
Works calibation certificate incl. works calibration certificate (measuring point chamber centre) at +37°C, 5 % CO2 for standard
units
Door fully insulated stainless steel door with 2-point locking (compression door lock)
Door inner glass door with opening (8 mm Ø) to take gas sample
Standard equipment CO2 connection set: hose with coupling and clamp
Standard accessories Membrane filter (in order to remove impurities and pollutants, all incoming gases pass through a
membrane filter before they reach the chamber)
Internals 2 perforated stainless steel shelf/shelves
Internals 1 stainless steel water dish
Stainless steel interior

Dimensions w(A) x h(B) x d(C): 560 x 480 x 400 mm (d less 35 mm for fan)
Interior material 1.4301 (ASTM 304), corrosion resistant
Volume 107 l
Max. number of internals 6
Max. loading of chamber 90 kg
Max. loading per internal 15 kg
Textured stainless steel casing

Dimensions w(D) x h(E) x d(F): 719 x 850 x 591 mm (d +56mm door handle)
Housing rear zinc-plated steel
Electrical data
Voltage 230 V, 50/60 Hz
Electrical load approx. 1300 W
Voltage 115 V, 50/60 Hz

Electrical load approx. 1300 W
Ambient conditions
Set Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance
from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances
must not be less than 5 cm.
Ambient temperature 10 °C to 35 °C
Humidity rh max. 70 %, non-condensing
Altitude of installation max. 2,000 m above sea level
Overvoltage category II
Pollution degree 2
Packing/shipping data
Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. w x h x d: 800 x 1030 x 800 mm

carton
Net weight approx. 75 kg
Gross weight carton approx. 100 kg
Standard units are safety-approved and bear the test marks

Memmert CO2-incubator ICO105 EN

Uploaded by

Copyright:

Available Formats

Memmert CO2-incubator ICO105 EN

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Memmert CO2-incubator ICO105 EN

Uploaded by

Copyright:

Available Formats

Product specification

Safety at all times: High-end functions for

Setting temperature range +18 to +50 °C

Setting accuracy 0.1 °C

Temperature variation in at + 37 °C +/- 0.3 K

Temperature fluctuations at 37 °C +/- 0.1 K

Setting accuracy humidity 0.5 % rh

Setting range active 40 to 97 % rh and rh-Off

Control of standard components

Adjustment range 0 to 20 % CO2

Setting accuracy 0,1%

Variation in time +/- 0.2 % CO2

Setting accuracy 0.1 % O2

Language setting German, English, Spanish, French, Polish, Czech, Hungarian

Documentation programme stored in case of power failure

Autodiagnostic system integral fault diagnostics for temperature and CO2

Alarm visual and acoustic

Door inner glass door with opening (8 mm Ø) to take gas sample

Internals 2 perforated stainless steel shelf/shelves

Internals 1 stainless steel water dish

Stainless steel interior

Interior material 1.4301 (ASTM 304), corrosion resistant

Max. number of internals 6

Max. loading of chamber 90 kg

Max. loading per internal 15 kg

Textured stainless steel casing

Housing rear zinc-plated steel

Voltage 115 V, 50/60 Hz

Humidity rh max. 70 %, non-condensing

Altitude of installation max. 2,000 m above sea level

Customs tariff number 8419 8998

Country of origin Federal Republic of Germany

Dimensions approx incl. w x h x d: 800 x 1030 x 800 mm

Net weight approx. 75 kg

Gross weight carton approx. 100 kg

Standard units are safety-approved and bear the test marks

You might also like