Data sheet 6GK5734-1FX00-0AA0

product type designation W734-1 RJ45

IWLAN client, SCALANCE W734-1, RJ45, 1 radio, 2 R-SMA antenna port,
iFeatures Support via KEY-PLUG, IEEE 802.11a/b/g/h/n, 2.4/5GHz, gross
data rate 300 Mbit/s, 2x RJ45 max. 100 Mbit/s, PoE integrated 2-port
switch, redundant 24 V DC, joint block, IP30, -20... 60 °C, plug slot
WPA2/802.11i/e, observe national approvals! CERT ID: MSN-W1-RJ-E2,
scope of delivery: Manuals on CD-ROM, German/English, 1x joint block; for
operation outside of USA/Israel .

transfer rate
transfer rate
● with WLAN / maximum 300 Mbit/s
● for Industrial Ethernet 10, 100 Mbit/s
transfer rate / for Industrial Ethernet
● minimum 10 Mbit/s
● maximum 100 Mbit/s
interfaces
number of electrical connections
● for network components or terminal equipment 2
● for power supply 1
● for redundant voltage supply 1
type of electrical connection
● for network components or terminal equipment RJ45 socket
● for power supply 4-pole screw terminal, PoE
design of the removable storage
● C-PLUG Yes
● KEY-PLUG Yes
memory
design of the removable storage
● C-PLUG Yes
● KEY-PLUG Yes
interfaces / wireless
number of radio cards / permanently installed 1
transmission mode / for multiple input multiple output 2x2
(MIMO)
number of spatial streams 2
number of electrical connections / for external antenna(s) 2
type of electrical connection / for external antenna(s) R-SMA (socket)
product feature / external antenna can be mounted Yes
directly on device
supply voltage, current consumption, power loss
type of voltage / of the supply voltage DC
supply voltage
● from Power-over-Ethernet according to IEEE802.3at 48 V
for type 1 and IEEE802.3af
consumed current
● at DC / at 24 V / typical 0.25 A
● with Power-over-Ethernet according to IEEE802.3at 0.125 A
for type 1 and IEEE802.3af / typical

6GK57341FX000AA0 Subject to change without notice

11/11/2022
Page 1/4 © Copyright Siemens
 power loss [W]
● at DC / at 24 V / typical 6W
● with Power-over-Ethernet according to IEEE802.3at 6W
for type 1 and IEEE802.3af / typical
supply voltage / 1
● from terminal block 19.2 V
supply voltage / 2
● from terminal block 28.8 V
ambient conditions
ambient temperature
● during operation -20 ... +60 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
relative humidity / at 25 °C / without condensation / during 95 %
operation / maximum
ambient condition / for operation When used under hazardous conditions (Zone 2), the SCALANCE
W774-1 RJ45 or W734-1 RJ45 product must be installed in an
enclosure. To comply with EN 50021, this enclosure must meet the
requirements of at least IP 54 in compliance with EN 60529.
protection class IP IP30
design, dimensions and weights
width 26 mm
height 156 mm
depth 127 mm
width / of the enclosure / without antenna 26 mm
height / of the enclosure / without antenna 147 mm
depth / of the enclosure / without antenna 127 mm
net weight 0.52 kg
fastening method wall mounting only if flat mounted
● S7-300 rail mounting Yes
● S7-1500 rail mounting Yes
● 35 mm top hat DIN rail mounting Yes
● wall mounting Yes
radio frequencies
operating frequency
● for WLAN in 2.4 GHz frequency band 2.41 ... 2.48 GHz; depending on the country approvals
● for WLAN in 5 GHz frequency band 4.9 ... 5.8 GHz; depending on the country approvals
product features, product functions, product components / general
product function / Access Point Mode No
product function / client Mode Yes
product function
● iPCF client Yes; Only in combination with the 'KEY-PLUG W780 iFeatures' or 'KEY-
PLUG W740 iFeatures'
● iPCF-MC client Yes; Only in combination with 'KEY-PLUG W780 iFeatures' or 'KEY-
PLUG W740 iFeatures'
number of iPCF-capable radio modules 1
product function / iPRP Yes; In combination with the 'KEY-PLUG W780 iFeatures' or 'KEY-
PLUG W740 iFeatures' only
product functions / management, configuration, engineering
number of manageable IP addresses / in client 8
product function
● CLI Yes
● web-based management Yes
● MIB support Yes
● TRAPs via email Yes
● configuration with STEP 7 Yes
● configuration with STEP 7 in the TIA Portal Yes
● WDS No
protocol / is supported
● Address Resolution Protocol (ARP) Yes
● ICMP Yes
● Telnet Yes
● HTTP Yes
● HTTPS Yes

6GK57341FX000AA0 Subject to change without notice

11/11/2022
Page 2/4 © Copyright Siemens
 ● TFTP Yes
● DCP Yes
● LLDP No
identification & maintenance function
● I&M0 - device-specific information Yes
● I&M1 – higher level designation/location designation Yes
product functions / diagnostics
product function
● PROFINET IO diagnosis Yes
● link check No
● connection monitoring IP-Alive No
● SysLog Yes
protocol / is supported
● SNMP v1 Yes
● SNMP v2 Yes
● SNMP v3 Yes
product functions / VLAN
product function
● function VLAN with IWLAN No
product functions / DHCP
product function
● DHCP client Yes
● DHCP server Yes
● DHCP Option 82 Yes
product functions / redundancy
protocol / is supported
● STP/RSTP Yes
● MSTP Yes
● RSTP Yes
product functions / security
product function
● ACL - MAC-based Yes
● management security, ACL-IP based Yes
● IEEE 802.1x (radius) Yes
● NAT/NAPT Yes
● access protection according to IEEE802.11i Yes
● WPA/WPA2 Yes
● TKIP/AES Yes
protocol / is supported
● SSH Yes
● RADIUS Yes
product functions / time
protocol / is supported
● NTP Yes
● SNTP Yes
● SIMATIC time synchronization (SIMATIC Time) Yes
standards, specifications, approvals
standard
● for FM FM 3611: Class I, Division 2, Groups A,B,C,D, T4 / Class 1, Zone 2,
Group IIC, T4
● for safety / from CSA and UL UL 60950-1, CSA C22.2 No. 60950-1
certificate of suitability
● EC Declaration of Conformity Yes
● CE marking Yes
● C-Tick Yes
● E1 approval No
● railway application in accordance with EN 50155 No
● NEMA TS2 No
● IEC 61375 No
● IEC 61850-3 No
● NEMA4X No
● Power-over-Ethernet according IEEE802.3at for Yes

6GK57341FX000AA0 Subject to change without notice

11/11/2022
Page 3/4 © Copyright Siemens
 type 1 and IEEE802.3af
● Power-over-Ethernet according to IEEE802.3at for Yes
type 2
standard for wireless communication
● IEEE 802.11a Yes
● IEEE 802.11b Yes
● IEEE 802.11e Yes
● IEEE 802.11g Yes
● IEEE 802.11h Yes
● IEEE 802.11i Yes
● IEEE 802.11n Yes
wireless approval You will find the current list of countries at:
www.siemens.de/funkzulassungen
standards, specifications, approvals / marine classification
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS) Yes
● French marine classification society (BV) Yes
● DNV GL Yes
● Korean Register of Shipping (KRS) Yes
● Lloyds Register of Shipping (LRS) Yes
● Nippon Kaiji Kyokai (NK) Yes
● Polski Rejestr Statkow (PRS) Yes
● Royal Institution of Naval Architects (RINA) Yes
standards, specifications, approvals / hazardous environments
standard / for hazardous zone EN 60079-15:2005, EN 60079-0:2006, II 3 G Ex nA II T4 KEMA 07
ATEX 0145X
certificate of suitability / CCC / for hazardous zone Yes
according to GB standard
accessories
accessories 24 V DC screw terminal included in scope of delivery
further information / internet-Links
Internet-Link
● to website: TIA Selection Tool http://www.siemens.com/tia-selection-tool
● to web page: selection aid TIA Selection Tool http://www.siemens.com/tia-selection-tool
● to the website: IWLAN http://www.siemens.com/iwlan
● to website: Industry Mall https://mall.industry.siemens.com
● to website: Information and Download Center http://www.siemens.com/industry/infocenter
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx-Download-Manager http://www.siemens.com/cax
● to website: Industry Online Support https://support.industry.siemens.com
security information
security information Siemens provides products and solutions with industrial security
functions that support the secure operation of plants, solutions,
machines, equipment and/or networks. They are important components
in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens
recommends strongly that you regularly check for product updates. For
the secure operation of Siemens products and solutions, it is necessary
to take suitable preventive action(e.g. cell protection concept) and
integrate each component into a holistic, state-of-the-art industrial
security concept. Third-party products that may be in use should also be
considered. For more information about industrial security, visit
http://www.siemens.com/industrialsecurity. To stay informed about
product updates as they occur, sign up for a product-specific newsletter.
For more information, visit http://support.automation.siemens.com.
(V3.4)

last modified: 7/1/2021

6GK57341FX000AA0 Subject to change without notice

11/11/2022
Page 4/4 © Copyright Siemens