User Manual

U32J590UQ* U32J592UQ*

The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.

The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.

•• An administration fee may be charged if either

‒‒ (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
‒‒ (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
Table of contents

Before Using the Product Connecting and Using a Source Device Screen Setup
Securing the Installation Space 4 Read below before installing the monitor. 21 SAMSUNG MAGIC Bright 25
Precautions for storage 4
Connecting and Using a PC 21 Brightness 26
Safety Precautions 4 Connection Using the HDMI Cable 21
Contrast 26
Cleaning 5 Connection Using the HDMI-DVI Cable 22
Electricity and Safety 5 Connection Using the DP Cable 22 Sharpness 26
Installation 6 Connecting to Headphones 22
Operation 7 Connecting the Power 23 Color 26

Correct posture to use the product 24 HDMI Black Level 27

Driver Installation 24 Eye Saver Mode 27

Preparations Game Mode 27
Setting Optimum Resolution 24
Parts 10 Response Time 27
Control Panel 10
Direct Key guide 11 Picture Size 28
Function Key Guide 12
Screen Adjustment 28
Configuring Eye Saver Mode, Brightness and
Contrast from the Initial Screen 14
Changing the Volume setting 14
Types of Ports 15
Adjusting the Product Tilt 16
Anti-theft Lock 16
Precautions for moving the monitor 17
Installing a Wall-mount Kit or Desktop Stand 18

Installation 19
Attaching the Stand 19
Removing the Stand 20

2
Table of contents

Configuring the PIP/PBP Settings Setup and Reset Troubleshooting Guide

PIP/PBP Mode 29 FreeSync 34 Requirements Before Contacting Samsung Customer
Service Center 40
Size 30 Eco Saving Plus 36 Testing the Product 40
Position 30 Off Timer Plus 36 Checking the Resolution and Frequency 40
Check the following. 40
Sound Source 30 PC/AV Mode 37
Q&A 42
Source 31 DisplayPort Ver. 37

Picture Size 31 Source Detection 37

Contrast 32 Key Repeat Time 37 Specifications

Power LED On 37 General 43

Reset All 37 Standard Signal Mode Table 44

Adjusting OSD (On Screen
Information 38
Display) settings
Transparency 33
Appendix
Language 33 Installing the Software Responsibility for the Pay Service (Cost to
Display Time 33 Customers) 48
Easy Setting Box 39
Not a product defect 48
Restrictions and Problems with the Installation 39
A Product damage caused by customer's fault 48
System Requirements 39
Others 48

3
Chapter 01
Before Using the Product

Securing the Installation Space Safety Precautions

Ensure some space around the product for ventilation. An internal temperature rise may cause fire and Warning A serious or fatal injury may result if instructions are not followed.
damage the product. Be sure to allow the amount of space as shown below or greater when installing
Personal injury or damage to properties may result if instructions are
the product. Caution not followed.
――The exterior may differ depending on the product.

10 cm (3.93 Inches)

10 cm (3.93 Inches)

10 cm 10 cm
(3.93 Inches) (3.93 Inches)

10 cm
(3.93 Inches)

10 cm (3.93 Inches)

Precautions for storage 10 cm (3.93 Inches)

High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
10 cm 10 cm
nearby.
(3.93 Inches) (3.93 Inches)

――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product
(Service fee will be charged.)
Do not press the monitor screen with hands or other objects. There is a risk of damaging
10 cm the screen.
(3.93 Inches)

4
Cleaning Electricity and Safety
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Take the following steps when cleaning. Warning
•• Do not use a damaged power cord or plug, or a loose power socket.
1 Power off the product and computer.
•• Do not use multiple products with a single power socket.
2 Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric •• Do not touch the power plug with wet hands.
shock may result. •• Insert the power plug all the way in so it is not loose.
3 Wipe the monitor with a clean, soft and dry cloth. •• Connect the power plug to a grounded power socket (type 1 insulated devices only).
‒‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
•• Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy
‒‒ Do not spray water or detergent directly on the product. object.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product. •• Do not place the power cord or product near heat sources.
5 Connect the power cord to the product when cleaning is finished. •• Clean any dust around the pins of the power plug or the power socket with a dry cloth.
6 Power on the product and computer.
Caution
•• Do not disconnect the power cord while the product is being used.

•• Only use the power cord provided with your product by Samsung. Do not use the power cord with
other products.

•• Keep the power socket where the power cord is connected unobstructed.
‒‒ The power cord must be disconnected to cut off power to the product when an issue occurs.
•• Hold the plug when disconnecting the power cord from the power socket.

5
Installation

Warning Caution
•• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT •• Do not drop the product while moving.
INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• Do not set down the product on its front.
•• Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of
•• Install the product at least 10 cm away from the wall to allow ventilation. the product is not protruding.

•• Keep the plastic packaging out of the reach of children. ‒‒ The product may fall and become damaged and/or cause an injury.

‒‒ Children may suffocate. ‒‒ Install the product only on cabinets or shelves of the right size.

•• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) •• Set down the product gently.

‒‒ The product may fall and become damaged and/or cause an injury. ‒‒ Product failure or personal injury may result.

‒‒ Using the product in an area with excess vibration may damage the product or cause a fire. •• Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical
substances, extreme temperatures or a significant presence of moisture, or a place where
•• Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or
the product will operate continuously for an extended period of time) may seriously affect its
smoke.
performance.
•• Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
‒‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a
‒‒ The product lifespan may be reduced or a fire may result. place.
•• Do not install the product within the reach of young children.
‒‒ The product may fall and injure children.
•• Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil
pollution. And do not install or use the product in the kitchen or near the kitchen stove.

6
Operation

Warning •• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent or input/output ports, etc).
•• There is a high voltage inside the product. Never disassemble, repair or modify the product
‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign
yourself.
substances have entered the product. Then contact Samsung Customer Service Center.
‒‒ Contact Samsung Customer Service Center for repairs.
•• Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the
•• To move the product, first disconnect all the cables from it, including the power cable.
product.
•• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord ‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign
immediately and contact Samsung Customer Service Center. substances have entered the product. Then contact Samsung Customer Service Center.
•• Do not let children hang from the product or climb on top of it.
‒‒ Children may become injured or seriously harmed.
•• If the product is dropped or the outer case is damaged, turn off the power and disconnect the
power cord. Then contact Samsung Customer Service Center.
‒‒ Continued use can result in a fire or electric shock.
•• Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
‒‒ The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a
serious injury.
•• During a lightning or thunderstorm, power off the product and remove the power cable.

•• Do not drop objects on the product or apply impact.

•• Do not move the product by pulling the power cord or any cable.

•• If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area
immediately.

•• Do not lift or move the product by pulling the power cord or any cable.

•• Do not use or keep combustible spray or an inflammable substance near the product.

•• Ensure the vents are not blocked by tablecloths or curtains.

‒‒ An increased internal temperature may cause a fire.

7
Caution
•• Leaving the screen fixed on a stationary image for an extended period of time may cause •• Insert the power plug into the AC/DC adapter until a click sound is heard.
afterimage burn-in or defective pixels.
•• Do not insert only the power plug into the power outlet.
‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the
•• Do not use an AC/DC adapter other than the provided one.
product for an extended period of time.
‒‒ It may cause electric shock or fire.
•• Disconnect the power cord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc). •• Do not insert the AC/DC adapter into the power outlet on the ceiling.

‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage. ‒‒ It may cause electric shock or fire.

•• Use the product at the recommended resolution and frequency. •• Rotate the power plug not to exceed the range (0 to 90°) on the AC/DC adapter.

‒‒ Your eyesight may deteriorate. ‒‒ It may cause electric shock or fire.

•• Do not put AC/DC adapters together. •• Never diassemble the power plug after being assembled. (It cannot be separated after assembly.)

•• Remove the plastic bag from the AC/DC adapter before you use it. •• Never use the provided power plug for other devices.

•• Do not let water enter the AC/DC adapter device or get the device wet. •• When removing the AC/DC adapter from the power outlet, hold the body of AC/DC adapter and pull
it up.
‒‒ An electric shock or fire may result.
‒‒ It may cause electric shock or fire.
‒‒ Avoid using the product outdoors where it can be exposed to rain or snow.
‒‒ Be careful not to get the AC/DC adapter wet when you wash the floor. •• Do not drop any objects or apply shock on the AC/DC adapter.
‒‒ It may cause electric shock or fire.
•• Do not put the AC/DC adapter near to any heating apparatus.
‒‒ Otherwise, a fire may result. •• Use the AC/DC adapter after removing its plastic cover.
‒‒ Otherwise, this may result fire.
•• Keep the AC/DC adapter in a well-ventilated area.

•• If you place the AC/DC power adapter so that it is hanging with the cord input facing upwards,
water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
Make sure to rest the AC/DC power adapter flat on a table or the floor.

8
•• Do not hold the product upside-down or move it by holding the stand.
‒‒ The product may fall and become damaged or cause an injury.
•• Looking at the screen too close for an extended period of time can deteriorate your eyesight.

•• Do not use humidifiers or stoves around the product.

•• Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use.

•• Do not touch the screen when the product has been turned on for an extended period of time as it
will become hot.

•• Store small accessories out of the reach of children.

•• Exercise caution when adjusting the product angle or stand height.

‒‒ Your hand or finger may get stuck and injured.
‒‒ Tilting the product at an excessive angle may cause the product to fall and an injury may result.
•• Do not place heavy objects on the product.
‒‒ Product failure or personal injury may result.
•• When using headphones or earphones, do not turn the volume too high.
‒‒ Having the sound too loud may damage your hearing.

9
Chapter 02
Preparations

Parts Icons Description

Multi directional button that helps navigate.
JOG Button ――The JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.
Control Panel This LED is power status indicator and works as
――The color and shape of parts may differ from what is shown. Specifications are subject to change without •• Power On (Power button): Off
notice to improve quality. •• Power saving mode: Blinking
Power LED
•• Power Off (Power button): On
――The power Indicator operation can be swapped by changing in the
menu. (System → Power LED On) Actual models because of functional
variation maybe haven’t this function.

Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
Function Key Guide displayed, press the corresponding direction button again.
――Function Key Guide may vary depending on the function or product
Power LED model. Please refer to the actual product.

JOG Button
Function Key Guide
UP

LEFT RIGHT

Return
DOWN
PRESS(ENTER)

10
Direct Key guide
――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes.

Eye Saver Mode

Volume

Features

Eye Saver Mode Off

•• UP/DOWN: Adjust Brightness, Contrast, Eye Saver Mode.

•• LEFT/RIGHT: Adjust Volume.

•• PRESS(ENTER): Display Function Key Guide.

11
Function Key Guide
――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.

UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.

Return

Icons Description

Selects to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has
been changed.

Selects by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed.
――If the OSD control is locked, Brightness and Contrast can be adjusted. PIP/PBP is available.
Eye Saver Mode is available. Information can be viewed.

Selects by moving the JOG button in the function key guide screen.
Press the button when configuring settings for the PIP/PBP function is required.

Selects to turn the Monitor off by moving the JOG button in the function key guide screen.

――Actual models because of functional variation, Function key guide options will be different.

12
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.

JOG Button Power saving/Non-signal mode

UP Source Change

Down

PRESS(ENTER) for 2 seconds Power Off

When the monitor displays the Main menu the JOG Button could be used as below.

JOG Button Action

UP/DOWN Move the option
Exit the Main menu.
LEFT Close Sublist without saving value.
Value decreases in the slider.
Move to next depth.
RIGHT
Value increases in the slider.
Move to next depth.
PRESS(ENTER)
Save the value and close Sublist.

13
Configuring Eye Saver Mode, Brightness and Contrast Changing the Volume setting
from the Initial Screen You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.

Adjust the Brightness, Contrast and Eye Saver Mode by moving the JOG button.
Volume 50

Contrast Mute

Eye Saver Mode Off

Brightness ――The displayed image may differ depending on the model.

――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute

――The displayed image may differ depending on the model. the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the
input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on
――The default brightness can vary depending on the region. the product.
――What is Auto Mute?
Eye Saver Mode
――Not available when PIP/PBP Mode is set to On. The function mutes the audio to improve sound effect when there is sound noise or when the input
signal is weak, usually due to a problem with the volume of an input device.
Brightness
――To activate the Mute function, access the Volume control screen, then use the JOG button to move the
――This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode.
MAGIC
focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease
――This menu is not available when Eco Saving Plus is enabled.
the Volume.
――This menu is not available when Eye Saver Mode is enabled.

Contrast
――This menu is not available when SAMSUNG Bright is in Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when Game Mode is enabled.

――This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode).

14
Types of Ports
――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual
product.

HDMI IN 1 HDMI IN 2 DP IN DC 19V

Port Description
Connects to a source device using an HDMI cable or HDMI-DVI cable.
HDMI IN 1 HDMI IN 2 ――HDMI1 support 3840 x 2160 @ 30 Hz
――HDMI2 support 3840 x 2160 @ 60 Hz

DP IN Connects to a PC using a DP cable.

Connect to an audio output device such as headphones.

――The sound could only be heard when using the HDMI to HDMI cable or DP cable.

DC 19V Connects to the AC/DC adapter.

15
Adjusting the Product Tilt Anti-theft Lock
――The color and shape of parts may differ from what is shown. Specifications are subject to change without ――An anti-theft lock allows you to use the product securely even in public places.
notice to improve quality. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide
provided with your anti-theft locking device for details.
-2° (±2°) ~ 15° (±2°)

To lock an anti-theft locking device:

•• The monitor tilt can be adjusted.

•• Hold the lower part of the product and adjust the tilt carefully.

1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
‒‒ An anti-theft locking device can be purchased separately.
‒‒ Refer to the user guide provided with your anti-theft locking device for details.
‒‒ Anti-theft locking devices can be purchased at electronics retailers or online.

16
Precautions for moving the monitor

•• Do not directly apply pressure on the screen. •• Do not hold the product upside down only by
the stand.
•• Do not hold the screen when moving the
monitor.

•• Hold the lower corners or edges of the

monitor when moving it.

17
Installing a Wall-mount Kit or Desktop Stand •• Notes
‒‒ Using a screw longer than the standard length can damage the internal components of the
――Power the product off and remove the power cable from the power socket. product.
‒‒ The length of screws required for a wall mount that does not comply with the VESA standards
1 2 may vary depending on the specifications.
‒‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper
screws or attaching the wall-mount kit or desktop stand using excessive force.
‒‒ Samsung shall not be held liable for any product damage or personal injury caused by using a
wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on
your own.
‒‒ To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10
3 4 cm or farther away from the wall.
‒‒ Be sure to use a wall-mount kit that complies with the standards.
C ‒‒ To install the monitor using a wall mount, disconnect the stand base from the monitor.
Unit: mm (inches)

Model name VESA screw hole specs (A * B) Standard Screw Quantity

in millimeters
4.0 mm Φ, 0.7 pitch * 10.0
U32J590UQ* / U32J592UQ* 100.0 x 100.0 (3.9 x 3.9) 4 EA
5
mm long
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.

A Attach the wall-mount kit or desktop stand here.

B Attach the INLAY to the position as shown in the figure.
C Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.

18
Installation

Attaching the Stand

――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
――The exterior may differ depending on the product.

1 2 3 4

Insert the stand neck into the stand base in the Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom Place the protective Styrofoam (cushion) included
direction shown in the figure. of the stand base. in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
If Styrofoam is unavailable, use a thick sitting mat.

5 6

Hold the main body of the product with your hand Connect the power supply and the data cable as - Caution
as shown by the figure. Push the assembled stand shown in the figure. Do not press down on the monitor. There is a risk
into the main body in the direction of the arrow as of damaging the monitor.
shown in the figure.

19
Removing the Stand
――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
――The exterior may differ depending on the product.

1 2 3 4

Place the protective Styrofoam (cushion) included To disassemble the stand from the monitor, be Press the lower part of the monitor with one hand, Remove the stand neck from the stand base by
in the package on the floor and place the product sure to press the lower part of the monitor with and pull the stand with the other hand in the pulling it in the direction of the arrow as shown in
facing down on the Styrofoam, as shown in the one hand, and shake the stand from side to side direction of the arrow as shown in the figure. the figure.
image. with the other hand to make some gap between
If Styrofoam is unavailable, use a thick sitting mat. them.

- Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.

20
Chapter 03
Connecting and Using a Source Device

Read below before installing the monitor. Connecting and Using a PC

1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and Select a connection method suitable for your PC.
positions of the matching ports on the monitor and external devices. ――Connecting parts may differ in different products.
――Provided ports may vary depending on the product.
2 Before connecting signal cables, disconnect the power cables for the monitor and external devices
from the power outlet to prevent device damage from a short circuit or overcurrent.

3 After connecting all signal cables, connect the power cables for the monitor and external devices Connection Using the HDMI Cable
to the power outlet.
Check to make sure that the power cables for the monitor and external devices, such as
4 Read the user manual to familiarize yourself with the monitor functions, precautions, and proper
computers and set-top boxes, are not connected to the power outlet.
use, before using the installed monitor.

HDMI IN 1, HDMI IN 2

――To display 3840 x 2160 @ 30 Hz, use an HDMI cable that supports 3840 x 2160 @ 30 Hz to connect HDMI1.
Make sure that the graphics card of the HDMI source supports 3840 x 2160 @ 30 Hz.
――To display 3840 x 2160 @ 60 Hz, use an HDMI cable that supports 3840 x 2160 @ 60 Hz to connect HDMI2.
Make sure that the graphics card of the HDMI source supports 3840 x 2160 @ 60 Hz.
――When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use
an HDMI cable other than provided by Samsung, the image quality may be degraded.

21
Connection Using the HDMI-DVI Cable Connecting to Headphones
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.

HDMI IN 1, HDMI IN 2
――Use headphones when activating sound with an HDMI-HDMI or DP cable.
――The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type.

――The audio function is not supported if the source device is connected using the HDMI-DVI cable.
――The optimum resolution may not be available with an HDMI-DVI cable.

Connection Using the DP Cable

Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.

DP IN

――To display 3840 x 2160 @ 60 Hz, use a DP cable that supports 3840 x 2160 @ 60 Hz. Make sure that the
graphics card of the DP source supports 3840 x 2160 @ 60 Hz.

22
Connecting the Power
1
DC 19V

1 Connect the power plug to the AC/DC adapter.

2 Connect the AC/DC adapter cable to the DC 19V port on the back of the monitor.
3 Plug the AC/DC adapter into the power outlet.
4 Press the JOG button on the back of the monitor to turn it on.
――The input voltage is switched automatically.
――Specifications of the adapter may vary depending on the applicable quality requirements.

23
Correct posture to use the product Driver Installation
――You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
――To install the latest version of the product driver, download it from the Samsung Electronics website at
http://www.samsung.com.

Setting Optimum Resolution

An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
Use the product in the correct posture as follows: ――If the optimum resolution is not selected, the message will appear up to three times for a specified time

•• Straighten your back. even when the product is turned off and on again.
――The optimum resolution can also be selected in Control Panel on your PC.
•• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at
the screen.

•• Keep your eyes directly in front of the screen.

•• Adjust the angle so light does not reflect on the screen.

•• Keep your forearms perpendicular to your upper arms and level with the back of your hands.

•• Keep your elbows at about a right angle.

•• Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels
attached to the floor, and your arms lower than your heart.

•• Do the Eye excercises or blink frequently,then eye fatigue will be relieved.

24
Chapter 04
Screen Setup
Configure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.

――The functions available may vary depending on the product model. The color and shape of parts may differ
In PC mode
from what is shown. Specifications are subject to change without notice to improve quality.
•• Custom: Customize the contrast and brightness as required.

•• Standard: Obtain a picture quality suitable for editing documents or using Internet.

SAMSUNG MAGIC Bright •• Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.

•• Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.

This menu provides an optimum picture quality suitable for the environment where the product will be
used.
In AV mode
――This menu is not available when Eco Saving Plus is enabled. When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, MAGIC
SAMSUNG
Bright
――This menu is not available when Game Mode is enabled. has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the
factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom which
――This menu is not available when Eye Saver Mode is enabled.
automatically recalls your personalized picture settings.
――Not available when PIP/PBP Mode is set to On.
•• Dynamic: Select this mode to view a sharper image than in Standard mode.
You can customize the brightness to suit your preferences.
•• Standard: Select this mode when the surroundings are bright. This also provides a sharp image.

•• Movie: Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.

•• Custom: Select this mode when you want to adjust the image according to your preferences.

25
Brightness Sharpness
You can adjust the general brightness of the picture. (Range: 0~100) Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the picture appear brighter. A higher value will make the outline of objects clearer.
――This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode. ――This option is not available when SAMSUNG Bright is in Cinema or Dynamic Contrast mode.
MAGIC MAGIC
――This menu is not available when Eco Saving Plus is enabled. ――This menu is not available when Game Mode is enabled.
――This menu is not available when Eye Saver Mode is enabled. ――Not available when PIP/PBP Mode is set to On.

Contrast Color
Adjust the contrast between the objects and background. (Range: 0~100) Adjust the tint of the screen.
A higher value will increase the contrast to make the object appear clearer. ――This menu is not available when SAMSUNG Bright is set to Cinema or Dynamic Contrast mode.
MAGIC
――This option is not available when SAMSUNG Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled.
MAGIC
――This menu is not available when Game Mode is enabled. ――This menu is not available when Eye Saver Mode is enabled.

――This menu is not available when PIP/PBP Mode is set to On and the Size is set to ――Not available when PIP/PBP Mode is set to On.
(PBP Mode).
•• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.

•• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.

•• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.

•• Color Tone: Select a color tone that best suits your viewing needs.
‒‒ Cool 2: Set the color temperature to be cooler than Cool 1.
‒‒ Cool 1: Set the color temperature to be cooler than Normal mode.
‒‒ Normal: Display the standard color tone.
‒‒ Warm 1: Set the color temperature to be warmer than Normal mode.
‒‒ Warm 2: Set the color temperature to be warmer than Warm 1.
‒‒ Custom: Customize the color tone.
――When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, Color Tone has
four color temperature settings (Cool, Normal, Warm and Custom).

•• Gamma: Adjust the middle level of luminance.

‒‒ Mode1 / Mode2 / Mode3

26
HDMI Black Level Game Mode
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ Configure the product screen settings for game mode.
color degradation, black level, etc.) may occur, depending on the connected source device. In such case, Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™
HDMI Black Level can be used to adjust the image quality. is connected.
If this is the case, correct the degraded picture quality using HDMI Black Level. ――This menu is not available when Eye Saver Mode is enabled.
――This function is only available in HDMI1 or HDMI2 mode. ――When the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns Off
――Not available when PIP/PBP Mode is set to On. even if it is set to On.
――If you want to keep Game Mode enabled all the time, select Always On.
•• Normal: Select this mode when there is no contrast ratio degradation.
――This menu is not available when Eco Saving Plus is enabled.
•• Low: Select this mode to reduce the black level and increase the white level when there is a
――Not available when PIP/PBP Mode is set to On.
contrast ratio degradation.
――HDMI Black Level may not be compatible with some source devices.
――The HDMI Black Level feature is only activated at a certain AV resolution, such as 720P @ 60 Hz and 1080P
@ 60 Hz.
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
Eye Saver Mode ――Use Standard mode when not playing a video or game.

――This menu is not available when PIP/PBP Mode is set to On and the Size is set to / / (PIP
Set to an optimum picture quality suitable for eye relaxation. Mode).

TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for
lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm
will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same
time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and
certified as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
――Not available when PIP/PBP Mode is set to On.

27
Picture Size Screen Adjustment
Change the picture size. ――This menu is only available when Picture Size is set to Screen Fit in AV Mode.

――This menu is not available when PIP/PBP Mode is set to On and the Size is set to When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally,
(PBP Mode).
――This option is not available when FreeSync is enabled. select Screen Fit to adjust horizontal position in 0-6 levels.

In PC mode Configuring H-Position & V-Position

•• Auto: Display the picture according to the aspect ratio of the input source. H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
•• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.

In AV mode
•• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.

•• 16:9: Display the picture with an aspect ratio of 16:9.

•• Screen Fit: Display the picture with the original aspect ratio without cutting off.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
――A digital output device is connected using the HDMI/DP cable.
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
――This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to
AV.

28
Chapter 05
Configuring the PIP/PBP Settings
A detailed description of each function is provided. Refer to your product for details.

――The functions available may vary depending on the product model. The color and shape of parts may differ ――PIP/PBP mode is compatible with Windows 7, Windows 8, and Windows 10.
from what is shown. Specifications are subject to change without notice to improve quality. ――The PIP/PBP function may not be available depending on the specifications of the graphics card used. If the
screen is blank in PIP/PBP mode when the optimum resolution is selected, go to Control Panel → Display →
Screen Resolution and click Detect on the PC. (Instructions are based on Windows 7.) If the screen is blank

PIP/PBP Mode
when the resolution is set to the optimum resolution, change the resolution to 1280 x 1024.
――The screen may flicker briefly or appear after a delay when you enable or disable the PIP/PBP function or
when you change the screen size with the PIP/PBP function activated.
Enable or disable the PIP/PBP Mode function. This can typically arise when a PC and a monitor are connected to two or more input sources. It has nothing
to do with the performance of a monitor.
The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed
on the main screen at the same time the another source device is displayed in inset windows. The issue is mainly caused when the video signals are delayed in transmission to the monitor depending on
the graphics card performance.
The PBP (Picture by Picture) function separates the screen in half displaying output from two different
source devices simultaneously on the left and right sides of the screen.

――To maximize the picture quality and Sound can be normal output it is recommended to use a graphics card
or DVD that supports 4K (3840 x 2160 @ 30 Hz) resolution when connect HDMI1 port.
――To maximize the picture quality and Sound can be normal output it is recommended to use a graphics card
or DVD that supports 4K (3840 x 2160 @ 60 Hz) resolution when connect HDMI2 port.
――When the PIP/PBP function is enabled, the resolution will not be able to automatically switch to the
optimum resolution due to a compatibility issue between the graphics card and the Windows system.
Set PIP/PBP Mode to Off. Alternatively, restart the monitor, then set the resolution to the optimum setting
using the Windows interface.

29
Size Sound Source
Select the size and aspect ratio of the sub-screen. Set which screen you want to hear the sound for.
•• : Select the icon image if you want to use PBP mode where the optimum resolution for the left
and right sides of the screen is 1920 x 2160 (width x height).
PIP mode
•• : Select the icon image if you want to use PIP mode where the optimum resolution for the sub-
screen is 720 x 480 (width x height). /

•• : Select the icon image if you want to use PIP mode where the optimum resolution of the sub-
screen is 1280 x 720 (width x height). PBP mode
•• : Select the icon image if you want to use PIP mode where the optimum resolution of the sub-
/
screen is 1920 x 1080 (width x height).

Position
Select the position of the sub-screen from the available options.
•• / / /
――Not available when PBP is selected.
――The screen may flicker if the input signal is unstable.

30
Source Picture Size
Select the source for each screen.

PIP Mode (available in PIP mode (Size / / ))

PIP Mode (available in PIP mode(Size / / )) Select the image size for sub-screen.
――The input source for the main screen changes.
――With the exception of the current input source, the other two input sources can be selected. In PC mode
――The screen may flicker if the input signal is unstable. •• Auto: Display the picture according to the aspect ratio of the each screen input source.
――When the Function Key Guide appears, move the JOG button LEFT to select the icon and then press the •• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
JOG button. The main screen will switch in the order DisplayPort → HDMI1 → HDMI2. source.

In AV mode
PBP Mode (available in PBP mode(Size ))
•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
――The input source for the main screen changes.
standard broadcasts.
――The screen may flicker if the input signal is unstable.
•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
――When the input signal of the left and right screens are the same, the operation cannot be performed.
•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
――When the Function Key Guide appears, move the JOG button LEFT to select the icon and then press the
anything off.
JOG button. The same PBP source setting menu appears.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
――A digital output device is connected using the HDMI/DP cable.
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
――This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to
AV.

31
PBP Mode (available in PBP mode(Size )) Contrast
Set the Picture Size for each of the divided screens.

In PC mode
PIP Mode (available in PIP mode(Size / / ))
•• Auto: Display the picture according to the aspect ratio of the each screen input source.

•• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input Adjust the contrast level for sub-screen.
source.

PBP Mode (available in PBP mode(Size ))

In AV mode
Adjust the contrast level for each screen.
•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.

•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.

•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
――A digital output device is connected using the HDMI/DP cable.
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
――This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to
AV.

32
Chapter 06
Adjusting OSD (On Screen Display) settings
A detailed description of each function is provided. Refer to your product for details.

――The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality. Language
Set the menu language.

Transparency
――A change to the language setting will only be applied to the onscreen menu display.
――It will not be applied to other functions on your PC.

Set the transparency for the menu windows.

Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.

33
Chapter 07
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.

――The functions available may vary depending on the product model. The color and shape of parts may differ •• Off: Disable FreeSync.
from what is shown. Specifications are subject to change without notice to improve quality.
•• Standard Engine: Enable the basic FreeSync functions of the AMD graphics card.

•• Ultimate Engine: Enable the FreeSync feature with a higher screen frame rate. Screen tearing
(abnormal sync between the screen and content) is reduced in this mode. Note that screen
FreeSync flickering may occur during game play.

Apply the optimum resolution when using FreeSync.

FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. The refresh rate setting method please refer to Q & A → How can I change the frequency?
This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. ――The FreeSync function is only enabled in HDMI2 or DisplayPort mode.

The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and Use the HDMI/DP cable provided by the manufacturer when using FreeSync.
compatibility with the AMD graphics card. If you use the FreeSync function while playing a game, the following symptoms may occur:
――Not available when PIP/PBP Mode is set to On.
•• The screen may flicker depending on the type of graphics card, the game option settings, or the
――The sound quality of the monitor may decrease if FreeSync is enabled. video being played. Try the following actions: decrease the game setting values, change the
current FreeSync mode to Standard Engine, or visit the AMD website to check your graphics driver’s
version and update it with the latest one.

•• While you are using the FreeSync function, the screen may flicker due to variation of the output
frequency from the graphics card.

•• The response rate during the game may fluctuate depending on the resolution. A higher resolution
generally decreases the response rate.

•• The sound quality of the monitor may be degraded.

――If you encounter any issues when using the function, contact the Samsung Service Center.
――When the resolution is changed while setting FreeSync to Standard Engine or Ultimate Engine, the screen
tearing can happen intermittently. Set FreeSync to Off and change the resolution.
――The function is unavailable in the devices (e.g. AV devices) that have no AMD graphic card. If the function is
applied, the screen may have malfunction.

34
The models in the Graphic Cards list supports FreeSync
FreeSync can only be used with specific AMD graphics card models. Refer to the following list for
supported graphics cards:
Make sure to install the latest official graphics drivers from AMD that support FreeSync.
――For additional AMD graphics card models that support the FreeSync feature, visit the official AMD website.
――Select FreeSync Off if you are using a graphics card from a different manufacturer.
――When applying the FreeSync function via the HDMI interface, it may fail to work due to the bandwidth
limitation of certain AMD display cards.

•• AMD Radeon R9 300 Series (Not include •• AMD Radeon R9 290

370/370X)
•• AMD Radeon R9 285
•• AMD Radeon R9 Fury X
•• AMD Radeon R7 260X
•• AMD Radeon R7 360
•• AMD Radeon R7 260
•• AMD Radeon R9 295X2
•• AMD Radeon RX 400 Series
•• AMD Radeon R9 290X

How do you enable FreeSync?

1 Set FreeSync to Standard Engine or Ultimate Engine in the OSD menu.
2 Enable FreeSync in AMD Radeon Settings:
Right-click the mouse → AMD Radeon Settings → Display
The "AMD FreeSync" feature should be set to "On". Select to "On" if not already enabled.

35
Eco Saving Plus Off Timer Plus
Reduce energy consumption compared to consumption at the maximum brightness level.
――This option is not available when SAMSUNG Bright is in Dynamic Contrast mode. Configuring Off Timer
MAGIC
――This menu is not available when Game Mode is enabled. Off Timer: Turn on Off Timer mode.
――This menu is not available when Eye Saver Mode is enabled. Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
――Not available when PIP/PBP Mode is set to On. power off after the specified number of hours.
――This option is only available when Off Timer is set to On.
•• Off: Deactivate the Eco Saving Plus function.
――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the
•• Auto: The power consumption will automatically be reduced by about 10% over the current setting.
product powers on. This is done in accordance with power supply regulations. If you do not want the timer
(The reduction of power consumption depends on the customer screen brightness condition.) to activate, go to → System → Off Timer Plus and set Off Timer to Off.
•• Low: Saves up to 25 % energy compared to the maximum brightness.

•• High: Saves up to 50 % energy compared to the maximum brightness. Configuring Eco Timer
Eco Timer: Turn on Eco Timer mode.
Eco Off After: The Eco Timer can be set between 10 and 180 minutes. The product will automatically
power off after the specified time has elapsed.
――This option is only available when Eco Timer is set to On.

36
PC/AV Mode Key Repeat Time
Set PC/AV Mode to AV. The picture size will be enlarged. Control the response rate of a button when the button is pressed.
This option is useful when you view a movie. Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
•• Set to PC when connected to a PC. when a button is pressed.

•• Set to AV when connected to an AV device.

――Supplied for the wide models only such as 16:9 or 16:10.
――If the monitor (when set to HDMI1, HDMI2, DisplayPort) is in power saving mode or is displaying the Power LED On
message Check Signal Cable, press the icon to display the On Screen Display (OSD). You can select PC
or AV.
Configure the settings to enable or disable the power LED located at the lower part of the product.
•• Working: The power LED is on when the product is turned on.

•• Stand-by: The power LED is on when the product is turned off.

DisplayPort Ver.
Select your Displayport.
――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. Reset All
――If the monitor (when set to HDMI1, HDMI2, DisplayPort) is in power saving mode or is displaying the
message Check Signal Cable, press the icon to display the On Screen Display (OSD). You can select 1.1 Return all the settings for the product to the default factory settings.
or 1.2↑.
――If you select 1.1, the maximum resolution of your screen drops to 2560 x 1440 due to the limitations in HBR1
transmission speeds.

Source Detection
Select either Auto or Manual as the method to recognize input signal.
――Not available when PIP/PBP Mode is set to On.

37
Information
View the current input source, frequency and resolution.

Information
Picture LU********/**
S/N:**************
PIP/PBP

OnScreen Display

System
HDMI1
Information **** x ****
**kHz **Hz
Exit

PIP
Information
Picture LU********/**
S/N:**************
PIP/PBP

OnScreen Display

System HDMI1 HDMI2

**** x **** **** x ****
Information
**kHz **Hz **kHz **Hz

Exit

PBP
Information
Picture LU********/**
S/N:**************
PIP/PBP

OnScreen Display

System
HDMI1 HDMI2
Information
**** x **** **** x ****
**kHz **Hz **kHz **Hz

Exit

――The displayed image may differ depending on the model.

38
Chapter 08
Installing the Software

Easy Setting Box System Requirements

OS Hardware
•• Windows 7 32Bit/64Bit •• At least 32MB of memory

•• Windows 8 32Bit/64Bit •• At least 60MB of free space on the hard disk drive

•• Windows 8.1 32Bit/64Bit

Easy Setting Box enables users to use the monitor by partitioning multiple sections.
•• Windows 10 32Bit/64Bit
To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at
http://www.samsung.com.
――The software may not work properly if you do not restart the computer after the installation.
――The Easy Setting Box icon may not appear depending on the computer system and the product
specifications.
――If the shortcut icon does not appear, press the F5 key.

Restrictions and Problems with the Installation

The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.

39
Chapter 09
Troubleshooting Guide

Requirements Before Contacting Samsung Check the following.

Customer Service Center
Installation issue (PC mode)
――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center. The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connectors are locked.

Testing the Product Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected
to the product and PC.
Check if your product is operating normally by using the product test function. The blank spaces found on the screen have nothing to do with the product.
If the screen is turned off and the power indicator blinks even though the product is properly connected Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
to a PC, perform a self-diagnosis test. screen size in the HDMI or DVI settings for the graphics card.
1 Power off both the PC and product. If the graphics card settings menu does not have an option to adjust the screen size, update the
2 Disconnect the cables from the product. graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
3 Power on the product.
the screen settings.)
4 If the message Check Signal Cable appears, the product is working normally.
――If the screen remains blank, check the PC system, video controller and cable.
Screen issue
Checking the Resolution and Frequency The power LED is off. The screen will not switch on.

For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message Check that the power cable is connected properly.
Not Optimum Mode will appear for a short time. The message Check Signal Cable appears.
――The displayed resolution may vary, depending on the computer system settings and cables. Check that the cable is properly connected to the product.
Check that the device connected to the product is powered on.

40