Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.

org/wiki/Physics_Study_Guide/Print_version

Physics Study Guide/Print version

From Wikibooks, the open-content textbooks collection

Preface
About this
guide
Normal
Section Linear
Units Force Momentum force and Work Energy
One motion
friction
Section Circular Wave Standing
Torque Fluids Fields Gravity Waves Sound
Two Motion Overtones Waves
Section
Thermodynamics Electricity Magnetism Optics
Three
Vectors
Frictional Greek
Apendicies Physics constants Logs and
coefficients alphabet
scalars

About this guide

Physics Study Guide

This guide is meant as a supplement to a year long freshman level physics course with a trigonometry prerequisite.
Some ideas from calculus are included in the book but are not necessary to understand the content. The overview of
equations and definitions and eventually sample problem solutions are pertinent to an introductory, college-level
physics course suitable for pre-meds. This is not a stand alone textbook rather the intent is to help the student and
any other interested person quickly familiarize themselves with concepts and terminology so as to use the
appropriate equations to get the desired answers to physics problems.

Contributing

Everyone is encouraged to contribute to the guide. Be bold in your edits! If you have a question about how we do
things here look at the Style Guide or post your question on the talk page.

Authors

Karl Wick Adon Metcalfe Brendan Abbott Tristan Sabel Fromund Hock Martin Smith-Martinez

Section One
The SI System of Measurement
Simple Units
Time

1 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

It is defined as the duration between two events. In the international system of measurement (S.I.) the second (s) is
the basic unit of time and it is defined as the time it takes a cesium (Cs) atom to perform 9 192 631 770 complete
oscillations. The Earth revolves around its own axis in 86400 seconds; this time is known as 1 day, and the 86400th
part of one day is known as a second.

Distance

In the international system of measurement (S.I.) the meter (m) is the basic unit of distance and is defined as the
distance traveled by light in 1/(299 792 458)th of a second.

Mass

In the international system of measurement (S.I.) the kilogram (kg) is the basic unit of mass and is defined as the
mass of a platinum-iridium alloy cylinder kept at the Bureau International des Poids et Mesures in Paris France. See
Wikipedia article.

Current

In the international system of measurement (S.I.) the ampere (A) is the basic measure of electrical current. It is
defined as the constant current which, if maintained in two straight parallel conductors of infinite length, of
negligible circular cross-section, and placed 1 metre (m) apart in vacuum, would produce between these conductors
a force equal to 2×10-7 newton (N) per metre of length.

Unit of Thermodynamic Temperature

The kelvin (K), unit of thermodynamic temperature, is the fraction 1/273.16 of the thermodynamic temperature of
the triple point of water.

Unit of Amount of Substance

1. The mole (mol) is the amount of substance of a system which contains as many elementary entities as there are
atoms in 0.012 kilogram of carbon 12.

2. When the mole is used, the elementary entities must be specified and may be atoms, molecules, ions, electrons,
other particles, or specified groups of such particles.

Luminous Intensity

The candela (cd) is the luminous intensity, in a given direction, of a source that emits monochromatic radiation of
frequency 540 x 1012 hertz and that has a radiant intensity in that direction of 1/683 watt per steradian.

Derived Units
Charge

The SI unit of charge is the coulomb (C). It is equal to 1 A*s (ampere times second).

Velocity

The SI unit for velocity is in m/s or meters per second.

Energy

The SI unit of energy is the joule (J). The joule has base units of kg·m²/s² = N·m. A joule is defined as the work done
or energy required to exert a force of one newton for a distance of one metre. See Wikipedia article.

2 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Force

The SI unit of force is the newton (N), named after Sir Isaac Newton. It is equal to .

Prefixes
Prefix yotta zetta exa peta tera giga mega kilo hecto deca deci centi milli micro nano
Symbol Y Z E P T G M k h da d c m µ n
10n 1024 1021 1018 1015 1012 109 106 103 102 101 100 10-1 10-2 10-3 10-6 10-9
1000n 10008 10007 10006 10005 10004 10003 10002 10001 1000-1 1000-2 1000-3

Kinematics
Kinematics is the description of motion. The motion of a point particle is fully described using three terms -
displacement, velocity, and acceleration. For real objects (which are not mathematical points), translational
kinematics describes the motion of an object's center of mass through space, while angular kinematics describes how
an object rotates about its center of mass. In this section, we focus only on translational kinematics.

Displacement, velocity, and acceleration are defined as follows.

Position
Wiktionary (http://wiktionary.org) defines "vector" (http://wiktionary.org/wiki/Vector) as "a quantity that has both
magnitude and direction, typically written as a column of scalars". That is, a number that has a direction assigned to
it.

In physics, a vector often describes the motion of an object. For example, Warty the Woodchuck goes 35 feet toward
a hole in the ground.

We can divide vectors into parts called "components" that each describe a part of the vector. Usually a vector is
divided into x and y components.

One dimensional coordinate

system

Two dimensional coordinate Three dimensional coordinate

system system

Displacement

Displacement answers the question, "Has the object moved?"

3 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Note the symbol. This symbol is a sort of "super equals" symbol, indicating that not only does
EQUAL the displacement , but more importantly displacement is OPERATIONALLY DEFINED by .

We say that operationally defines displacement, because gives a step by step procedure for
determining displacement. Namely ...

1. Measure where the object is initially.

2. Measure where the object is at some later time.
3. Determine the difference of these two position values.

Be sure to note that DISPLACEMENT is NOT the same as DISTANCE traveled.

For example, imagine traveling one time along the circumference of a circle. If you end where you started, your
displacement is zero, even though you have clearly traveled some distance. In fact, displacement is an average
distance traveled. On your trip along the circle, your north and south motion averaged out, as did your east and west
motion.

Clearly we are losing some important information. The key to regaining this information is to use smaller
displacement intervals. For example, instead of calculating your displacement for your trip along the circle in one
large step, consider dividing the circle into 16 equal segments. Calculate the distance you traveled along each of
these segments, and then add all your results together. Now your total traveled distance is not zero, but something
approximating the circumference of the circle. Is your approximation good enough? Ultimately, that depends on the
level of accuracy you need in a particular application, but luckily you can always use finer resolution. For example,
we could break your trip into 32 equal segments for a better approximation.

Returning to your trip around the circle, you know the true distance is simply the circumference of the circle. The
problem is that we often face a practical limitation for determining the true distance traveled. (The traveled path may
have too many twists and turns, for example.) Luckily, we can always determine displacement, and by carefully
choosing small enough displacement steps, we can use displacement to obtain a pretty good approximation for the
true distance traveled. (The mathematics of calculus provides a formal methodology for formally estimating a "true
value" through the use of successively better approximations.) In the rest of this discussion, I will replace Δ with δ
to indicate that small enough displacement steps have been used to provide a good enough approximation for the
true distance traveled.

Velocity

Velocity answers the question "Is the object moving now, and if so - how quickly?"

Note that once again we have an operational definition. We are told what steps to follow to calculate velocity.

Also note that technically we have a definition for AVERAGE velocity. Remember that displacement is really an
average distance traveled, so the best we can hope for is an average velocity.

If we are careful to use small displacement steps that come pretty close to approximating the true distance traveled,
then we can write the definition for INSTANTANEOUS velocity as

4 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Or with the idea of limits from calculus, we have ...

Acceleration

Acceleration answers the question "Is the object's velocity changing, and if so - how quickly?"

Once again we have an operational definition. We are told what steps to follow to calculate acceleration.

Again, also note that technically we have a definition for AVERAGE acceleration. As for displacement, if we are
careful to use a series of small velocity changes, then we can write the definition for INSTANTANEOUS
acceleration as

Or with the help of calculus, we have ...

Vectors
Notice that the definitions given above for displacement, velocity, and acceleration included little arrows over many
of the terms. The little arrow reminds us that direction is an important part of displacement, velocity, the change in
velocity, and acceleration. These quantities are VECTORS. By convention, the little arrow always points right when
placed over a letter. So for example,
just reminds us that velocity is a vector, and does NOT imply that this particular velocity is rightward. Why do we
need vectors? As a simple example, consider velocity. It is not enough to know how fast one is moving. We also
need to know which direction we are moving. Less trivially, consider how many different ways an object could be
experiencing an acceleration (a change in its velocity). Ultimately there are three distinct ways an object could
accelerate.

1. The object could be speeding up.

2. The object could be slowing down.
3. The object could be traveling at constant speed, while changing its direction of motion.

(More general accelerations are simply combinations of 1 and 3 or 2 and 3).

Importantly, a change in the direction of motion is just as much an acceleration as is speeding up or slowing down.
In classical mechanics, no direction is associated with time (you cannot point to next Tuesday). So the definition of
tells us that acceleration will point wherever the CHANGE in velocity points. Understanding that the

5 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

direction of determines the direction of leads to three non-mathematical but very powerful rules of thumb.

1. If the velocity and acceleration of an object point in the same direction, the object's speed is increasing.
2. If the velocity and acceleration of an object point in opposite directions, the object's speed is decreasing.
3. If the velocity and acceleration of an object are perpendicular to each other, the object's speed stays constant,
while the object's direction of motion changes.

(Again, more general motion is simply a combination of 1 and 3 or 2 and 3.)

Using these three simple rules will dramatically help your intuition of what is happening in a particular problem. In
fact, much of the first semester of college physics is simply the application of these three rules in different formats.

Equations of motion : Constant acceleration

A particle is said to move with constant acceleration if its velocity changes by equal amounts in equal intervals of
time, no matter how small the intervals may be.

Since acceleration is a vector constant acceleration means that both direction and magnitude of this vector don't
change during the motion. This means that average and instantaneous acceleration are equal. We can use that to
derive an equation for velocity as a function of time by integrating the constant acceleration.

Giving the following equation for velocity as a function of time.

To derrive the equation for position we simply integrate the equation for velocity.

Integrating again gives the equation for position.

The following are the 'Equations of Motion'. They are simple and obvious equations if you think over them for a
while.

6 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Equations of Motion
Equation Description

Position as a function of time

Velocity as a function of time

The following equations can be derived from the two equations above by combining them and eliminating
variables.
Eliminating time (Very useful, see the section on Energy)

Eliminating acceleration

Key to Symbols
Symbol Description
velocity at time t
initial velocity
acceleration (constant)
time taken during the motion
position at time t
initial position

Acceleration in One Dimension

(Needs content)...

Acceleration in Two Dimensions

(Needs content)

Acceleration in Three Dimensions

(Needs content)

Force
A net force on a body causes a body to accelerate. The amount of that acceleration depends on the body's inertia (or
its tendency to resist changes in motion), which is measured as its mass. When Isaac Newton formulated Newtonian
mechanics, he discovered three fundamental laws of motion. However, Albert Einstein proved that these laws are
just a convenient approximation. These laws, however, greatly simplify calculations and are used when studying
objects at low velocities and are, thus, useful.

Friction
It is the force that opposes relative motion or tendency of relative motion between two surfaces in contact
represented by f. When two surfaces move relative to each other or they have a tendency to move relative to each
other, at the point (or surface) of contact, there appears a force which opposes this relative motion or tendency of
relative motion between two surface in contact. It acts on both the surfaces in contact with equal magnitude and
opposite direction (Newton's 3rd law). Friction force tries to stop relative motion between two surfaces in contact, if
it is there, and when two surfaces in contact are at rest relative to each other, the friction force tries to maintain this

7 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

relative rest. Friction force can assume the magnitude (below a certain maximum magnitude called limiting static
friction) required to maintain relative rest between two surfaces in contact. Because of this friction force is called a
self adjusting force.

Earlier, it was believed that friction was caused due to the roughness of the two surfaces in contact with each other.
However, modern theory stipulates that the cause of friction is the Coulombic force between the atoms present in the
surface of the regions in contact with each other.

Formula: Limiting Friction = (Friction Coefficient)(Normal reaction)

Static Friction = the friction force that keeps an object at relative rest.

Kinetic Friction = sliding friction

Newton's First Law of Motion

(The Law of Inertia)

An static object with no net force acting on it remains at rest or if in movement it will maintains a constant
velocity

This means, essentially, that acceleration does not occur without the presence of a force. The object tends to
maintain its state of motion. If it is at rest, it remains at rest and if it is moving with a velocity then it keeps moving
with the same velocity. This tendency of the object to maintain its state of motion is greater for larger mass. The
"mass" is, therefore, a measure of the inertia of the object

In a state of equilibrium, where the object is at rest or proceeding at a constant velocity, the net force in every
direction must be equal to 0.

At a constant velocity (including zero velocity), the sum of forces is 0. If the sum of forces does not equal zero, the
object will accelerate (change velocity over time).

It is important to note, that this law is applicable only in non-accelerated coordinate systems. It is so, because the
perception of force in accelerated systems are different. A body under balanced force system in one frame of
reference, for example a person standing in an accelerating lift, is acted upon by a net force in the earth's frame of
reference.

Inertia is the tendency of an object to maintain its velocity i.e. to resist acceleration.

Inertia is not a force.

Inertia varies directly with mass.

Newton's Second Law of Motion

The time rate of change in momentum is proportional to the applied force and takes place in the
direction of the force.

'The acceleration of an object is proportional to the force acting upon it.

These two statements mean the same thing, and is represented in the following basic form (the system of
measurement is chosen such that constant of proportionality is 1) :

The product of mass and velocity i.e. mv

8 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

is called the momentum. The net force on a particle is ,thus, equal to rate change of momentum of the particle with
time. Generally mass of the object under consideration is constant and thus can be taken out of the derivative.

Force is equal to mass times acceleration. This version of Newton's Second Law of Motion assumes that the mass
of the body does not change with time, and as such, does not represent a general mathematical form of the Law.
Consequently, this equation cannot, for example, be applied to the motion of a rocket, which loses its mass (the lost
mass is ejected at the rear of the rocket) with the passage of time.

An example: If we want to find out the downward force of gravity on an object on Earth, we can use the following
formula:

Hence, if we replace m with whatever mass is appropriate, and multiply it by 9.806 65 m/s2, it will give the force in
newtons that the earth's gravity has on the object in question(in other words, the body's weight).

Newton's Third Law of Motion

Forces occur in pairs equal in magnitude and opposite in direction

This means that for every force applied on a body A by a body B, body B receives an equal force in the exact
opposite direction. This is because forces can only be applied by a body on another body. It is important to note here
that the pair of forces act on two different bodies, affecting their state of motion. This is to emphasize that pair of
equal forces do not cancel out.

There are no spontaneous forces.

It is very important to note that the forces in a "Newton 3 pair", described above, can never act on the same body.
One acts on A, the other on B. A common error is to imagine that the force of gravity on a stationary object and the
"contact force" upwards of the table supporting the object are equal by Newton's third law. This is not true. They
may be equal - but because of the second law (their sum must be zero because the object is not accelerating), not
because of the third.

The "Newton 3 pair" of the force of gravity (= earth's pull) on the object is the force of the object attracting the
earth, pulling it upwards. The "Newton 3 pair" of the table pushing it up is that it, in its turn, pushes the table down.

Equations
To find Displacement (http://en.wikipedia.org/wiki/Displacement_%28vector%29)

To find Final Velocity (http://en.wikipedia.org/wiki/Velocity)

9 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

To find Final Velocity (http://en.wikipedia.org/wiki/Velocity)

To find Force when mass is changing

To find Force when mass is a constant

Variables

Force (N)
Mass (kg)
Acceleration (m/s2)
Momentum (kg m/s)
time (s)
Tension (N)
Acceleration due to gravity near the earth's surface (
see Physics Constants)

Definitions

10 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Force (F): Force is equal to rate change of momentum with time.

(Newton’s second law). A vector. Units: newtons (N)
The newton (N): defined as the force it takes to accelerate one kilogram
one metre per second squared (U.S. meter per second squared), that is, the
push it takes to speed up one kilogram from rest to a velocity of 1 m/s in 1
second
Mass (m) : Also called inertia. The tendency of an object to resist change
in its motion, and its response to a gravitational field. A scalar. Units:
kilograms (kg)
Acceleration (a): Change in velocity (Δv) divided by time (t). A vector.
Units: meters per second squared (U.S. meters per seconds squared)
(m/s2)
Momentum (p): Mass times velocity. Expresses the motion of a body and
its resistance to changing that motion. A vector. Units: kg m/s

Momentum
Linear momentum

Momentum is equal to mass times velocity.

Angular momentum

Angular momentum of an object revolving around an external axis O is equal to the cross-product of the position
vector with respect to O and its linear momentum.

Angular momentum of a rotating object is equal to the moment of inertia times angular velocity.

Force and linear momentum, torque and angular momentum

11 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

is equal to the change in linear momentum over the change in time.

Net torque is equal to the change in linear momentum over the change in distance.

Conservation of momentum

Let us prove this law.

We'll take two particles, say, a and b. Their momentums are and .They are moving opposite to each other
along the x-axis and they collide. Now force is given by:

According to Newton's third law,the forces on each particle are equal and opposite.So,

Rearranging,

This means that the sum of the momentums does not change with time. Therefore, the law is proved.

Variables

p: momentum, (kg·m/s)
m: mass, (kg)
v: velocity (m/s)
L: angular momentum, (kg·m2/s)
I: moment of inertia, (kg·m2)
ω: angular velocity (rad/s)

12 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

α: angular acceleration (rad/s 2)

F: force (N)
t: time (s)
r: position vector (m)

Bold denotes a vector quantity.

Italics denotes a scalar quantity.

Definition of terms

Momentum (p): Mass times velocity. (kg·m/s)

Mass (m) : A quantity that describes how much material exists, or how the material responds in a gravitational
field. Mass is a measure of inertia. (kg)

Velocity (v): Displacement divided by time (m/s)

Angular momentum (L): A vector quantity that represents the tendency of an object in circular or rotational
motion to remain in this motion. (kg·m2/s)

Moment of inertia (I): A scalar property of a rotating object. This quantity depends on the mass of the object
and how it is distributed. The equation that defines this is different for differently shaped objects. (kg·m2)

Angular speed (ω): A scalar measure of the rotation of an object. Instantaneous velocity divided by radius of
motion (rad/s)

Angular velocity (ω): A vector measure of the rotation of an object. Instantaneous velocity divided by radius
of motion, in the direction of the axis of rotation. (rad/s)

Force (F): mass times acceleration, a vector. Units: newtons (N)

Time (t) : (s)

Isolated system: A system in which there are no external forces acting on the system.

Position vector (r): a vector from a specific origin with a magnitude of the distance from the origin to the
position being measured in the direction of that position. (m)

Calculus-based Momentum

Force is equal to the derivative of linear momentum with respect to time.

13 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Torque is equal to the derivative of angular momentum with respect to time.

The Normal Force

Why is it that we stay steady in our chairs when we sit down? According to the first law of motion, if an object is
translationally in equilibrium (velocity is constant), the sum of all the forces acting on the object must be equal to
zero. For a person sitting on a chair, it can thus be postulated that a normal force is present balancing the
gravitational force
that pulls the sitting person down. However, it should be noted that only some of the normal force can cancel the
other forces to zero like in the case of a sitting person. In Physics, the term normal as a modifier of the force
implies that this force is acting perpendicular to the surface at the point of contact of the two objects in question.
Imagine a person leaning on a vertical wall. Since the person does not stumble or fall, he/she must be in equilibrium.
Thus, the component of his/her weight along the horizontal is balanced or countered (opposite direction) by an equal
amount of force -- this force is the normal force
on the wall. So, on a slope, the normal force would not point upwards as on a horizontal surface but rather
perpendicular to the slope surface.

The normal force can be provided by any one of the four fundamental forces, but is typically provided by
electromagnetism since microscopically, it is the repulsion of electrons that enables interaction between surfaces of
matter. There is no easy way to calculate the normal force, other than by assuming first that there is a normal force
acting on a body in contact with a surface (direction perpendicular to the surface). If the object is not accelerating
(for the case of uniform circular motion, the object is accelerating) then somehow, the magnitude of the normal force
can be solved. In most cases, the magnitude of the normal force can be solved together with other unknowns in a
given problem.

Sometimes, the problem does not warrant the knowledge of the normal force(s). It is in this regard that other
formalisms (e.g. Lagrange method of undertermined coefficients) can be used to eventually solve the physical
problem.

Friction
When there is relative motion between two surfaces, there is a resistance to the motion. This force is called friction.
Friction is the reason why people could not accept Newton's first law of Motion, that an object tends to keep its state
of motion. Friction acts opposite to the direction of the original force The frictional force is equal to the frictional
coefficient times the normal force

Friction is caused due to attractive forces between the molecules near the surfaces of the objects. If two steel plates
are made really flat and polished and cleaned and made to touch in a vacuum, it bonds together. It would look as if
the steel was just one piece.The bonds are formed as in a normal steel piece. This is called cold welding. And this is
the main cause of friction.

The above equation is an empirical one--in general, the frictional coefficient is not constant. However, for a large
variety of contact surfaces, there is a well characterized value. This kind of friction is called Coulomb friction. There
is a separate coefficient for both static and kinetic friction. This is because once an object is pushed on, it will
suddenly jerk once you apply enough force and it begins to move.

Also, the frictional coefficient varies greatly depending on what two substances are in contact, and the temperature
and smoothness of the two substances. For example, the frictional coefficients of glass on glass are very high. When
you have similar materials, in most cases you don't have Coulomb friction.

For static friction, the force of friction actually increases proportionally to the force applied, keeping the body

14 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

immobile. Once, however, the force exceeds the maximum frictional force, the body will begin to move. The
maximum frictional force is calculated as follows:

The static frictional force is less than or equal to the coefficient of static friction times the normal force. Once
the frictional force equals the coefficient of static friction times the normal force, the object will break away and
begin to move.

Once it is moving, the frictional force then obeys:

The kinetic frictional force is equal to the coefficient of kinetic friction times the normal force. As stated before,
this always opposes the direction of motion.

Variables

Symbol Units Definition

Force of friction
none Coefficient of friction

Definition of Terms

Normal force (N): The force on an object perpendicular to the surface it rests on utilized in order to account
for the body's lack of movement. Units: newtons (N)

Force of friction (Ff): The force placed on a moving object opposite its direction of motion due to the
inherent roughness of all surfaces. Units: newtons (N)

Coefficient of friction (μ): The coefficient that determines the amount of friction. This varies tremendously
based on the surfaces in contact. There are no units for the coefficient of either static or kinetic friction

It's important to note, that in real life we often have to deal with viscose and turbulent friction - they appear when
you move the body through the matter.

Viscose friction is proportional to velocity and takes place at approximately low speeds. Turbulent friction is
proportional to V2 and takes place at higher velocities.

Work
Work is equal to the scalar product of force and displacement.

15 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

The scalar product of two vectors is defined as the product of their lengths with the cosine of the angle between
them. Work is equal to force times displacement times the cosine of the angle between the directions of force and
displacement.

Work is equal to change in kinetic energy plus change in potential energy for example the potenitial energy due to
gravity.

Work is equal to average power times time.

The Work done by a force taking something from point 1 to point 2 is

Work is in fact just a transfer of energy. When we 'do work' on an object, we transfer some of our energy to it. This
means that the work done on an object is its increase in energy. Actually, the kinetic energy and potential energy is
measured by calculating the amount of work done on an object. The gravitational potential energy (there are many
types of potential energies) is measure as 'mgh'. mg is the weight/force. And h is the distance. The product is nothing
but the work done. Even kinetic energy is a simple deduction from the laws of linear motion. Try substituing for v^2
in the formula for kinetic energy.

Variables

W: Work (J)
F: Force (N)
d: Displacement (m)

Definition of terms

16 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Work (W): Force times distance. Units: joules (J)

Force (F): mass times acceleration (Newton’s classic definition). A vector. Units: newtons (N)

When work is applied to an object or a system it adds or removes kinetic energy to or from that object or system.
More precisely, a net force in one direction, when applied to an object moving opposite or in the same direction as
the force, kinetic energy will be added or removed to or from that object. Note that work and energy are measured in
the same unit, the joule (J).

Advanced work topics

Energy

Kinetic energy is equal to one-half of mass times the square of velocity.

Kinetic energy is equal to one-half of moment of inertia times the square of angular velocity.

Potential energy due to gravity is equal to the product of mass, acceleration due to gravity, and height (elevation)
of the object.

Potential energy due to spring deformation is equal to one-half the product of the spring constant times the square
of the change in length of the spring.

Definition of terms

17 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Energy: a theoretically indefinable quantity that describes potential to do work. SI unit for energy is the joule
(J). Also common is the calorie (cal).

The joule: defined as the energy needed to push with the force of one newton over the distance of one meter.
Equivalent to one newton-meter (N·m) or one watt-second (W·s).

1 joule = 1 J = 1 newton • 1 meter = 1 watt • 1 second

Energy comes in many varieties, including Kinetic energy, Potential energy, and Heat energy.

Kinetic energy (K): The energy that an object has due to its motion. Half of velocity squared times mass.
Units: joules (J)

Potential energy due to gravity (UG): The energy that an object has stored in it by elevation from a mass,
such as raised above the surface of the earth. This energy is released when the object becomes free to move.
Mass times height time acceleration due to gravity. Units: joules (J)

Potential energy due to spring compression (UE): Energy stored in spring when it is compressed. Units:
joules (J)

Heat energy (Q): Units: joules (J)

Spring compression (Dx): The difference in length between the spring at rest and the spring when stretched
or compressed. Units: meters (m)

Spring constant (k): a constant specific to each spring, which describes its “springiness”, or how much work
is needed to compress the spring. Units: newtons per meter (N/m)

Change in spring length (Δx): The distance between the at-rest length of the spring minus the compressed or
extended length of the spring. Units: meters (m)

Moment of inertia (I): Describes mass and its distribution. (kg•m2)

Angular momentum (ω): Angular velocity times mass (inertia). (rad/s)

Section Two

Rotational Kinematics

Rotational Kinematics concerns with the description of spinning bodies. The orientation of any object can be
described by three angular quantities called the Euler angles.

18 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

A three dimentional Euler angles which uniquely

A two dimensional polar spherical-polar co-ordinate describe the orientation of an
co-ordinate system system object in space

Torque and Circular Motion

Circular motion is the motion of a particle at a set distance (called radius) from a point. For circular motion, there
needs to be a force that makes the particle turn. This force is called the 'centripetal force.' Please note that the
centripetal force is not
a new type of force-it is just a force causing rotational motion. To make this clearer, let us study the following
examples:

1. If Stan ties a piece of thread to a small pebble and rotates it in a horizontal circle above his head, the circular
motion of the pebble is caused by the tension force in the thread.

2. In the case of the motion of the planets around the sun (which is roughly circular), the force is provided by the
gravitational force exerted by the sun on the planets.

Thus, we see that the centripetal force acting on a body is always provided by some other type of force -- centripetal
force, thus, is simply a name to indicate the force that provides this circular motion. This centripetal force is always
acting inward toward the center. You will know this if you swing an object in a circular motion. If you notice
carefully, you will see that you have to continously pull inward. We know that an opposite force should exist for this
centripetal force(by Newton's 3rd Law of Motion). This is the centrifugal force, which exists only if we study the
body from a non-inertial frame of reference(an accelerating frame of reference,such as in circular motion). This is a
so-called 'pseudo-force', which is used to make the Newton's law applicable to the person who is inside a
non-inertial frame . The centrifugal force is equal and opposite to the centripetal force. It is caused due to inertia of a
body.

Average angular velocity is equal to one-half of the sum of initial and final angular velocities assuming constant
acceleration, and is also equal to the angle gone through divided by the time taken.

Angular acceleration is equal to change in angular velocity divided by time taken.

Angular momentum

19 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Angular momentum of an object revolving around an external axis O is equal to the cross-product of the position
vector with respect to O and its linear momentum.

Angular momentum of a rotating object is equal to the moment of inertia times angular velocity.

L = Iω

Angular momentum is equal to moment of inertia times angular velocity.

Torque is equal to moment of inertia times angular acceleration, which is also equal to the change in angular
momentum divided by time taken.

Rotational Kinetic Energy is equal to one-half of the product of moment of inertia and the angular velocity
squared.

IT IS USEFUL TO NOTE THAT

The equations for rotational motion are analogous to those for linear motion-just look at those listed above. When
studying rotational dynamics, remember:

-the place of force is taken by torque

-the place of mass is taken by moment of inertia

-the place of displacement is taken by angle

-the place of linear velocity, momentum, acceleration, etc. is taken by their angular counterparts.

Variables

τ: torque, (N·m)
I: moment of inertia, (kg·m2)
α: angular acceleration, (rad/s 2)
L: angular momentum, (kg·m2/s)
t: time (s)

20 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Kr: rotational kinetic energy, (J = kg·m 2/s2)

ω: angular velocity, (rad/s)

Definition of terms

Torque (τ): Force times distance. A vector. (N·m)

Moment of inertia (I): Describes the object's resistance to torque - the rotational analog to inertial mass.
(kg·m2)

Angular momentum (L): (kg·m2/s)

Angular velocity (ω): (rad/s)

Angular acceleration (α): (rad/s2)

Time (t): (s)

Buoyancy

Buoyancy is the force due to pressure differences on the top and bottom of an object under a fluid (gas or liquid).

Net force = buoyant force - force due to gravity on the object

Bernoulli's Principle

Fluid flow is a complex phenomenon. An ideal fluid may be described as:

The fluid flow is steady i.e its velocity at each point is constant with time.
The fluid is incompressible. This condition applies well to liquids and in certain circumstances to gases.
The fluid flow is non-viscous. Internal friction is neglected. An object moving through this fluid does not
experience a retarding force. We relax this condition in the discussion of Stokes' Law.
The fluid flow is irrotational. There is no angular momentum of the fluid about any point. A very small
wheel placed at an arbitary point in the fluid does not rotate about its center. Note that if turbulence is present,
the wheel would most likely rotate and its flow is then not irrotational.

As the fluid moves through a pipe of varying cross-section and elevation, the pressure will change along the pipe.
The Swiss physicist Daniel Bernoulli (1700-1782) first derived an expression relating the pressure to fluid speed and
height. This result is a consequence of conservation of energy and applies to ideal fluids as described above.

Consider an ideal fluid flowing in a pipe of varying cross-section. A fluid in a section of length Δx1 moves to the
section of length Δx2 in time Δt. The relation given by Bernoulli is:

21 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

[where: P is pressure at cross-section, K is a constant, h is height of cross-section, ρ is density, and v is velocity of

fluid at cross-section.]

In words, the Bernoulli relation may be stated as: As we move along a streamline the sum of the pressure {P), the
kinetic energy per unit volume and the potential energy per unit volume remains a constant.

(To be concluded)

Fields

A field is one of the more difficult concepts to grasp in physics. Simply put, a field is a collection of vectors often
representing the force an object would feel if it were placed at any particular point in space. With gravity, the field is
measured in newtons, as it depends solely on the mass of an object, but with electricity, it is measured in newtons
per coulomb, as the force on an electrical charge depends on the amount of that charge. Typically these fields are
calculated based on canceling out the effect of a body in the point in space that the field is desired. As a result, a
field is a vector, and as such, it can (and should) be added when calculating the field created by TWO objects at one
point in space.

Fields are typically illustrated through the use of what are called field lines or lines of force. Given a source that
exerts a force on points around it, sample lines are drawn representing the direction of the field at points in space
around the force-exerting source.

There are three major categories of fields:

1. Uniform fields
are fields that have the same value at any point in space. As a result, the lines of force are parallel.
2. Spherical fields
are fields that have an origin at a particular point in space and vary at varying distances from that point.
3. Complex fields
are fields that are difficult to work with mathematically (except under simple cases, such as fields created by
two point object), but field lines can still typically be drawn. Dipoles are a specific kind of complex field.

Magnetism also has a field, measured in teslas, and it also has field lines, but its use is more complicated than
simple "force" fields. Secondly, it also only appears in a two-pole form, and as such, is difficult to calculate easily.

The particles that form these magnetic fields and lines of force are called electrons and not magnetons. A magneton
is a quantity in magnetism.

Definition of terms

Field: A collection of vectors that often represents the force that an object would feel if it were placed in any
point in space.

Field Lines: A method of diagramming fields by drawing several sample lines showing direction of the field
through several points in space.

Newtonian Gravity

Newtonian Gravity (simplified gravitation) is an apparent force (a.k.a. pseudoforce) that simulates the attraction of
one mass to another mass. Unlike the three fundamental (real) forces of electromagnetism and the strong and weak

22 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

nuclear forces, gravity is purely attractive. As a force it is measured in newtons. The distance between two objects is
measured between their centers of mass.

Gravitational force is equal to the product of the universal gravitational constant and the masses of the two
objects, divided by the square of the distance between their centers of mass.

The value of the gravitational field which is equivalent to the acceleration due to gravity caused by an object at a
point in space is equal to the first equation about gravitational force, with the effect of the second mass taken out.

Gravitational potential energy of a body to infinity is equal to the universal gravitational constant times the
mass of a body from which the gravitational field is being created times the mass of the body whose potential energy
is being measured over the distance between the two centers of mass. Therefore, the difference in potential energy
between two points is the difference of the potential energy from the position of the center of mass to infinity at both
points. Near the earth's surface, this approximates:

Potential energy due to gravity near the earth's surface is equal to the product of mass, acceleration due to
gravity, and height (elevation) of the object.

If the potential energy from the body's center of mass to infinity is known, however, it is possible to calculate
the escape velocity, or the velocity necessary to escape the gravitational field of an object. This can be calculated as
follows:

This is derived based on utilizing the law of conservation of energy and the equation to calculate kinetic energy.

23 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

The proof of this will be left to the reader.

Variables

F: force (N)
G: universal constant of gravitation, (6.67x10-11 N•m2/kg2)
m1: mass of the first body
m2: mass of the second body
r: the distance between the point at which the force or field is being taken, and
the center of mass of the first body
g: acceleration due to gravity (on the earth’s surface, this is 9.8 m/s2)
U: potential energy from the location of the center of mass to infinity (J)
ΔUg: Change in potential energy (J)
m and M: mass (kg)
h: height of elevation (m)
vesc: escape velocity (m/s)

Definition of terms

Universal constant of gravitation (G): This is a constant that is the same

everywhere in the known universe and can be used to calculate gravitational
attraction and acceleration due to gravity.
6.67x10-11 N·m2/kg2

Mass one (m1): One of two masses that are experiencing a mutual gravitational
attraction. We can use this for the mass of the Earth (10 23 kg).

Mass two (m2): One of two masses that are experiencing a mutual gravitational
attraction. This symbol can represent the mass of an object on or close to earth.
Units: kilograms (kg)

Acceleration due to gravity (g): This is nearly constant near the earth's surface
because the mass and radius of the earth are essentially constant. At extreme
altitudes the value can vary slightly, but it varies more significantly with latitude.
This is also equal to the value of the gravitational field caused by a body at a
particular point in space
(9.8 m/s2)

Escape velocity (vesc): The velocity necessary to completely escape the

gravitational effects of a body.

Waves

24 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Wave speed is equal to the frequency times the wavelength. It can be understood as how frequently a certain
distance (the wavelength in this case) is traversed.

Frequency is equal to speed divided by wavelength.

Period is equal to the inverse of frequency.

Variables

λ: wavelength (m)
v: wave speed (m/s)
f: frequency (1/s), (Hz)
T: period (s)

Definition of terms

Wavelength (λ): The length of one wave, or the distance from a point on one wave to the same point on the
next wave. Units: meters (m). In light, λ tells us the color.

Wave speed (v): the speed at which the wave pattern moves across the surface. Units: meters per second,
(m/s)

Frequency of oscillation (f) (or just frequency): the number of times the wave pattern repeats itself in one
second. Units: seconds-1 = (1/s) = hertz (Hz) In sound, f tells us the pitch. The inverse of frequecy is the period
of oscillation.

Period of oscillation (T) (or just period): duration of time betweeen one wave and the next one passing the
same spot. Units: seconds (s). The inverse of the period is frequency. Use a capital, italic T and not a
lowercase one, which is used for time.

25 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Amplitude (A): the maximum height of the wave measured from the average height of the wave (the wave’s
center). Unit: meters (m)

Image here

The wave’s extremes, its peaks and valleys, are called antinodes. At the middle of the wave are points that do not
move, called nodes.

Examples of waves: Water waves, sound waves, light waves, seismic waves, shock waves, ultrasonic waves …

Oscillation

A wave is said to oscillate, which means to move back and forth in a regular, repeating way. This fluctuation can be
between extremes of position, force, or quantity.

Different types of waves have different types of oscillations.

Longitudinal waves: Oscillation is parallel to the direction of the wave. Examples: sound waves, waves in a spring.

Transverse waves: Oscillation is perpendicular to direction of the wave. Example: light

Interference

When waves overlap each other it is called interference. This is divided into constructive and destructive
interference.

Constructive interference: the waves line up perfectly and add to each others’ strength.

26 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Destructive interference: the two waves cancel each other out, resulting in no wave.

Resonance

In real life, waves usually give a mishmash of constructive and destructive interference and quickly die out.
However, at certain wavelengths standing waves form, resulting in resonance. These are waves that bounce back
into themselves in a strengthening way, reaching maximum amplitude.

Resonance is a particular case of forced vibration when the frequency of the impressed periodic force is equ al to the
natural frequency of the body so that it vibrates with increased amplitude, spontaneously.

Wave overtones

For resonance in a taut string, the first harmonic is determined for a wave form with either one antinode and two
nodes. That is, the two ends of the string are nodes because they do not vibrate while the middle of the string is an
antinode because it experiences the greatest change in amplitude. This means that one half of a full wavelength is
represented by the length of the resonating structure.

27 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

The frequency of the first harmonic is equal to wave speed divided by twice the length of the string. (Recall that
wave speed is equal to wavelength times frequency.)

F1 = v/2L

The wavelength of the first harmonic is equal to double the length of the string.

λ1 = 2L

The "nth" wavelength is equal to the fundamental wavelength divided by n.

λn = λ1/n

Harmonics for a taut string*

Harmonic number Overtone number F = λ=

F1 First harmonic --- F1 = v/2L λ1 = 2L
F2 Second harmonic First overtone F2 = 2F1 λ2 =λ1/2
F3 Third harmonic Second overtone F3 = 3F1 λ3 = λ1/3
Fn Nth harmonic (Nth - 1) overtone Fn = nF1 λn = λ1/n

* or any wave system with two identical ends, such as a pipe with two open or closed ends. In the case of a pipe with two open
ends, there are two antinodes at the ends of the pipe and a single node in the middle of the pipe, but the mathematics work out
identically.

Definition of terms

Frequency (F): Units: (1/s), hertz (Hz)

Fundamental frequency, first harmonic (F)1: The lowest frequency (longest wavelength) allowed for the
system.

Length of string (L): (or pipe, etc.) Units: meters (m).

Wavelength (λ): Units: meters (m).

The first overtone is the first allowed harmonic above the fundamental frequency (F1).

In the case of a system with two different ends (as in the case of a tube open at one end), the closed end is a node
and the open end is an antinode. The first resonant frequency has only a quarter of a wave in the tube. This means

28 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

that the first harmonic is characterized by a wavelength four times the length of the tube.

F1 = v/4L

The wavelength of the first harmonic is equal to four times thelength of the string.

λ1 = 4L

The "nth" wavelength is equal to the fundamental wavelength divided by n.

λn = λ1/n

Note that "n" must be odd in this case as only odd harmonics will resonate in this situation.

Harmonics for a system with two different ends*

Harmonic
Overtone number F = λ=
number
F1 First harmonic --- F1 = v/4L λ1 = 4L
F2 Third harmonic First overtone F2 = 3F1 λ2 =2λ1/3
λ3 =
F3 Fifth harmonic Second overtone F3 = 5F1
2λ1/5
(Nth - 1)/2 F(n-1)/2 = λn =
Fn Nth harmonic†
overtone nF1 2λ1/n

* such as a pipe with one end open and one end closed
†In this case only the odd harmonics resonate, so n is an odd integer.

Vs: velocity of sound

dependant on qualities of the medium transmitting the sound, (the air) such as its density, temperature, and
“springiness.” A complicated equation, we concentrate only on temperature.
increases as temperature increases (molecules move faster.)
is higher for liquids and solids than for gasses (molecules are closer together.)
for “room air” is 340 meters per second (m/s).
Speed of sound is 343 meters per second at 20 degrees C. Based on the material sound is passing through and
the temperature, the speed of sound changes.

Standing waves

29 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Wave speed is equal to the square root of tension divided by the linear density of the string.

μ = m/L

Linear density of the string is equal to the mass divided by the length of the string.

λmax = 2L

The fundamental wavelength is equal to two times the length of the string.

Variables

λ: wavelength (m)
λmax: fundamental wavelength (m)
μ: linear density (g/m)
v: wave speed (m/s)
F: force (N)
m: mass (g)
L: length of the string (m)
l: meters (m)

Definition of terms

Tension (F): (not frequency) in the string (t is used for time in these equations). Units: newtons (N)

Linear density (μ): of the string, Greek mu. Units: grams per meter (g/m)

Velocity (v) of the wave (m/s)

Mass (m): Units: grams (g). (We would use kilograms but they are too big for most strings).

Length of the string (L): Units: meters (m)

Fundamental frequency: the frequency when the wavelength is the longest allowed, this gives us the lowest sound

30 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

that we can get from the system.

In a string, the length of the string is half of the largest wavelength that can create a standing wave, called its
fundamental wavelength.

Sound

style="background-color: #F3F3FF; border: solid 1px #D6D6FF; padding: 1em;"

valign=top |

The amplitude is the magnitude of sound

pressure change within a sound wave. Sound
amplitude can be measured in pascals (Pa),
though its more common to refer to the sound
(pressure) level as Sound
intensity(dB,dBSPL,dB(SPL)), and the percieved
sound level as Loudness(dBA, dB(A)). Sound
intensity is flow of sound energy per unit time
through a fixed area. It has units of watts per
square meter. The reference Intensity is defined
as the minimum Intensity that is audible to the
human ear, it is equal to 10-12 W/m2, or one
picowatt per square meter. When the intensity is
quoted in decibels this reference value is used.
Loudness is sound intensity altered according to
Fig. 1: The Fletcher-Munson equal-loudness contours. Phons
the frequency response of the human ear and is
are labelled in blue.
measured in a unit called the A-weighted decibel
(dB(A), also used to be called phon).

The Decibel

The decibel is not, as is commonly believed, the unit of sound. Sound is measured in terms of pressure. However,
the decibel is used to express the pressure as very large variations of pressure are commonly encountered. The
decibel is a dimensionless quantity and is used to express the ratio of one power quantity to another. The definition
of the decibel is

, where x is a squared quantity, ie pressure squared, volts squared etc. The decibel is useful to define relative
changes. For instance, the required sound decrease for new cars might be 3 dB, this means, compared to the old car
the new car must be 3 dB quieter. The absolute level of the car, in this case, does not matter.

style="background-color: #F3F3FF; border: solid 1px #D6D6FF; padding: 1em;"

valign=top |
I0 = 10 − 12 W / m2

Definition of terms

31 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Intensity (I): the amount of energy transferred through 1 m2 each second. Units: watts per square meter

Lowest audible sound: I = 0 dB = 10-12 W/m2 (A sound with dB < 0 is inaudible to a human.)

Threshold of pain: I = 140 dB = 10 W/m2

Sample equation: Change in sound intensity

Δβ = β2 - β1
= 10 log(I2/I0) - 10 log(I1/I0)
= 10 [log(I2/I0) - log(I1/I0)]
= 10 log[(I2/I0)/(I1/I0)]
= 10 log(I2/I1)
where log is the base-10 logarithm.

Doppler effect

f' is the observed frequency, f is the actual frequency, v is the speed of sound (v = 336 + 0.6T), T is temperature in
degrees Celsius v0 is the speed of the observer, and vs
is the speed of the source. If the observer is approaching the source, use the top operator (the +) in the numerator,
and if the source is approaching the observer, use the top operator (the -) in the denominator. If the observer is
moving away from the source, use the bottom operator (the -) in the numerator, and if the source is moving away
from the observer, use the bottom operator (the +) in the denominator.

Example problems

A. An ambulance, which is emitting a 40 Hz siren, is moving at a speed of 30 m/s towards a stationary observer. The
speed of sound in this case is 339 m/s.

B. An M551 Sheridan, moving at 10 m/s is following a Renault FT-17 which is moving in the same direction at 5
m/s and emitting a 30 Hz tone. The speed of sound in this case is 342 m/s.

32 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Section Three

Introduction

Thermodynamics deals with the movement of heat and its conversion to mechanical and electrical energy among
others.

Laws of Thermodynamics

First Law

The First Law is a statement of conservation of energy law:

ΔU = Q + W

The First Law can be expressed as the change of internal energy of a system (ΔU) equals the amount of heat added
to a system (Q) plus the work done on the system (W).

If Q is positive, the system has gained energy by heating.

If W is positive, the system has gained energy from work done on the system.

As written the equations have a problem in that neither Q or W are state functions or quantities which can be
known by direct measurement without knowing the history of the system.

In a gas, the first law can be written in terms of state functions as

dU = Tds − pdV

Zero-th Law

After the first law of Thermodynamics had been named, physicists realised that there was another more fundamental
law, which they termed the 'zero-th'.

This is that:

If two bodies are at the same temperature, there is no resultant heat flow between
them.

An alternate form of the 'zero-th' law can be described:

If two bodies are in thermal equilibrium with a third, all are in thermal
equilibrium with each other.

33 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

This second statement, in turn, gives rise to a definition of Temperature (T):

Temperature is the only thing that is the same between two otherwise unlike
bodies that are in thermal equilibrium with each other.

Second Law

This law states that the level of entropy (disorder) S in a closed system will never decrease with time.

where kB is the Boltzmann constant ( ) and Ω is the partition

function, i. e. the number of all possible states in the system.

This was the statistical definition of entropy, there is also a "macroscopic" definition:

where T is the temperature and dQ is the increment in energy of the system.

Third Law

The third law states that a temperature of absolute zero cannot be reached.

Temperature Scales

There are several different scales used to measure temperature. Those you will most often come across in physics
are degrees Celsius and kelvins.

Celsius temperatures use the symbol Θ. The symbol for degrees Celsius is °C. Kelvin temperatures use the symbol
T. The symbol for kelvins is K.

The Celsius Scale

The Celsius scale is based on the melting and boiling points of water.

The temperature of melting ice is 0 °C. This is called the ice point

The temperature of boiling water is 100 °C. This is called the steam point.

The Celsius scale is sometimes known as 'Centigrade', but the CGPM chose degrees Celsius from among the three
names then in use way back in 1948, and centesimal and centigrade should no longer be used. See Wikipedia
(http://en.wikipedia.org/wiki/Centigrade) for more details.

The Kelvin Scale

The Kelvin scale is based on a more fundamental temperature than the melting point of ice. This is absolute zero

34 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

(equivalent to −273.15 °C), the lowest possible temperature anything could be cooled to—where the kinetic energy
of any system is at its minimum.

Although the Kelvin scale starts at a different point to Celsius, its units are of exactly the same size.

Therefore:

Temperature in kelvins (K) = Temperature in degrees Celsius (°C) + 273.15

Specific Latent Heat

Energy is needed to break bonds when a substance changes state. This energy is sometimes called the latent heat.
Temperature remains constant during changes of state.

To calculate the energy needed for a change of state, the following equation is used:

Heat transferred, ΔQ (J) = Mass, m (kg) x specific latent heat capacity, L (J/kg)

The specific latent heat, L, is the energy needed to change the state of 1 kg of the substance without changing the
temperature.

The latent heat of fusion refers to melting. The latent heat of vapourisation refers to boiling.

Specific Heat Capacity

The specific heat capacity is the energy needed to raise the temperature of a given mass by a certain temperature.

The change in temperature of a substance being heated or cooled depends on the mass of the substance and on how
much energy is put in. However, it also depends on the properties of that given substance. How this affects
temperature variation is expressed by the substance's specific heat capacity (c). This is measured in J/(kg·K) in SI
units.

Change in internal energy, ΔU (J) = mass, m (kg) x specific heat capacity, c

(J/(kg·K)) x temperature change, ΔT (K)

Electricity

35 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

The force resulting from two nearby charges is equal to k times charge one times charge two divided by the square
of the distance between the charges.

The electric field created by a charge is equal to the force generated divided by the charge.

Electric field is equal to a constant, “k”, times the charge divided by the square of the distance between the charge
and the point in question.

Electric potential energy is equal to a constant, “k” multiplied by the two charges and divided by the distance
between the charges.

Variables

F: Force (N)
k: a constant, 8.988*109 (N•m2/C2)
q1: charge one (C)
q2: charge two (C)
r: distance between the two charges, (m)

Electricity acts as if all matter were divided into four categories:

1. Superconductors, which allow current to flow with no resistance. (However these have only been produced in
relatively extreme laboratory conditions, such as at temperatures approaching absolute zero)
2. Conductors, which allow electric current to flow with little resistance.
3. Semiconductors, which allow some electric current to flow but with significant resistance.
4. Insulators, which do not allow electric current to flow.

Charges are positive (+) or negative (-). Any two like charges repel each other, and opposite charges attract each
other.

Electric fields

A charge in an electrical field feels a force. The charge is not a vector, but force is a vector, and so is the electric

36 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

field. If a charge is positive, then force and the electric field point in the same direction. If the charge is negative,
then the electric field and force vectors point in opposite directions.

A point charge in space causes an electric field. The field is stronger closer to the point and weaker farther away.

Electricity is made of subatomic particles called Electrons and so are Electric Fields and Magnetic Fields.

For a good introduction to Gauss' Law and Ampere's Law, check out this website
(http://slacker.yosunism.com)

Magnetism

The magnetic force exerted on a moving particle in a magnetic field is the cross product of the magnetic field' and
the velocity of the particle, multiplied by the charge of the particle.

Because the magnetic force is perpendicular to the particle's velocity, this causes uniform circular motion. That
motion can be explained by the following

The radius of this circle is directly proportional to the mass and the velocity of the particle and inversely
proportional to the charge of the particle and the field strength of the magnetic field.

The period and frequency of this motion (referred to as the cyclotron period and frequency) can be derived as well.

The magnetic field created by charge flowing through a straight wire is equal to a constant, , multiplied by the
current flowing through the wire and divide by the distance from the wire.

The magnetic field

37 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

created by a magnetic dipole (at distances much greater than the size of the dipole) is approximately equal to a
constant, , multiplied by the dipole moment divided by the cube of the distance from the dipole. EDIT: This
forumla is incomplete. The field from a dipole is a vector that depends not only on the distance from the dipole, but
also the angle relative to the orientation of the magnetic moment. This is because of the vector nature of the
magnetic moment and its associated magnetic field. The field component pointing in the same directions as the
magnetic moment is the above formula multiplied by (3*(Cos[theta])^2-1).

B = μ0nI

The magnetic field created by an ideal solenoid is equal to a constant, μ0, times the number of turns of the
solenoid times the current flowing through the solenoid.

The magnetic field created by an ideal toroid is equal to a constant, μ0, times the number of turns of the toroid
times the current flowing through the toroid divided by the circumference of the toroid.

The magnetic force between two wires is equal to a constant, , times the current in one wire times the current
in the other wire times the length of the wires divided by the distance between the wires.

The torque on a current loop in a magnetic field is equal to the cross product of the magnetic field and the area
enclosed by the current loop (the area vector is perpendicular to the current loop).

The dipole moment of a current loop is equal to the current in the loop times the area of the loop times the
number of turns of the loop.

The magnetic potential energy is the opposite of the dot product of the magnetic field and the dipole moment.

Variables

38 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

F: Force (N)
q: Charge (C)
v: Velocity (m/s)
B: Magnetic field (teslas (T))
r: Radius (m)
m: Mass (kg)
T: Period (s)
f: Frequency (Hz)
μ0: A constant, 4π×10-7 N/A
y: Distance (m)
μ: Dipole moment
x: Distance (m)
n: Number of turns
: Length (m)
d: Distance (m)
τ: Torque (N·m)
A: Area (m2)
U: Potential energy (J)

Electronics

Current is the rate of flow of charge.

I = Current [amperes - A]
Q = Charge [coulombs - C]
T = Time [seconds - s]

howstuffworks.com (http://www.howstuffworks.com)

Voltage is equal to current multiplied by resistance

Power is equal to the product of voltage and current

Electronics is the flow of current through semiconductor devices like silicon and germanium.

Semiconductor devices are those which behave like conductors at higher temperature.

Transistor, diode, SCR are some electronic devices.

Light

Light is that range of electromagnetic energy that is visible to the human eye, the visible colors. The optical

39 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

radiation includes not only the visible range, but a broader range of invisible electromagnetic radiation that could be
influenced in its radiation behavior in a similar way as the visible radiation, but needs often other transmitters or
receivers for this radiation. Dependant on the kind of experimental question light - optical radiation behaves as a
wave or a particle named lightwave or photon. The birth or death of photons needs electrons - electromagnetic
charges, that change their energy.

The speed of light is fastest in the vacuum.

In a wave we have to distinguish between the speed of transport of energy or the speed of the transport of on phase
state of a wave of a defined frequency. In vacuum the speed of waves of any photon energy - wavelength is the
same, but the transmission speed through material is dependant on wavelength - photon energy. At the time the
measurement of the speed of light in vacuum reached the uncertainty of the unit of length, the meter, this basic unit
got in 1960 a new definition, based on the unit of time. Taking the best known measurement values it was defined
without any uncertainties of length, that the speed of light is 299.792,458 meters per second. For this reason the only
uncertainty in the speed of light is the uncertainty of the realisation of the unit of time, the second. (If you like to get
the standard of lenth, cooperate with the watchmaker).

However, when electromagnetic radiation enters a medium with refractive index, n, its speed would become

where cn is the speed of light in the medium.

Refraction

Refraction occurs when light travels from one medium into another (i.e. from air into water). Refraction is the
changing of direction of light due to the changing speed of light. Refraction occurs toward the normal when light
travels from a medium into a denser medium. Example when light travels from air into a block of glass, light is
refracted towards the normal. The ratio between the sine of the angle of the incident ray and sine of the angle of the
refracted ray is the same as the ratios of the indexes of refraction.

OR

This is known as Snell's Law - an easy way to remember this is that 'Snell' is 'lens' backwards.

Mirrors and lenses

Focal length

f is the focal length.

f is negative in concave mirror and concave lens.
f is positive in convex mirror and convex lens.
di is the distance from the image to the mirror or lens
For a mirror, it is positive if the image appears in front of the mirror. It is negative if the image appears
behind.

40 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

For a lens, it is positive if the image appears on the opposite side of the lens as the light source. It is
negative if the image appears on the same side of the lens as the light source.

do
is the distance from the object to the mirror or the lens (always positive). The only case, when it is negative, is
the case, when you don't have a real object, but you do have an imaginary object - a converging set of rays
from another optical system.
an easy way to remember the formula is to memorize "if I Do I Die", which stands for 1/f = 1/d_0 + 1/d_i

Magnification

M is the magnification.
If it is positive the image is erect
If it is negative the image is inverted
hi is the image height.
ho is the object height.
di is the distance from the image to the mirror or lens (also often v)
For a mirror, it is positive if the image appears in front of the mirror. It is negative if the image appears
behind.
For a lens, it is positive if the image appears on the opposite side of the lens as the light source. It is
negative if the image appears on the same side of the lens as the light source.
do is the distance from the object to the mirror or lens (also often u)

Appendices
Commonly Used Physical Constants
Uncertainty should be read as 1.234(56) = 1.234 0.056
Relative
Name Symbol Value Units
Uncertainty
Speed of light
c (exact)
(in vacuum)
Magnetic
μ0 (exact)
Constant
Electric
(exact)
Constant
Newtonian
Gravitaional G
Constant
Plank's
h
Constant
Elementary
e C
charge
Mass of the
me kg
electron
Mass of the
mp kg
proton

41 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Fine structure
dimentionless
constant
Molar gass
R
constant
Boltzman's
k
constant
Avogadro's
Number
NA mol − 1
Rydberg
constant m−1
Standard
acceleration of g defined
gravity
Atmospheric
atm Pa defined
pressure
Bohr Radius

To Be Merged Into Table

This list is prepared in the format

Constant (symbol) : value

1 Electron Volt (1 eV) : 1.60 × 10 −19 J

Coulomb's Law Constant (k) : 1/(4 π ε0) = 9.0 × 109 N·m2/C2
Faraday constant (F) : 96,485 C·mol−1
Mass of a neutron (mn) : 1.67495 × 10−27 kg
Mass of Earth : 5.98 × 1024 kg
Mass of the Moon : 7.35 × 1022 kg
Mean radius of Earth : 6.37 × 106 m
Mean radius of the Moon : 1.74 × 106 m
Dirac's Constant ( ) : h / (2π) = 1.05457148 × 10−34 J·s
Speed of sound in air at STP : 3.31 × 10 2 m/s
Unified Atomic Mass Unit (u) : 1.66 × 10−27 kg

Item Proton Neutron Electron

Mass 1 1 Negligible
Charge +1 0 -1

See Also
Wiki-links
Wikipedia Article

External Links
NIST Physics Lab (http://www.physics.nist.gov/cuu/Constants/index.html)

42 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Approximate Coefficients of Friction

Material Kinetic Static
Rubber on concrete (dry) 0.68 0.90
Rubber on concrete (wet) 0.58 -.--
Rubber on asphalt (dry) 0.67 0.85
Rubber on asphalt (wet) 0.53 -.--
Rubber on ice 0.15 -.--
Waxed ski on snow 0.05 0.14
Wood on wood 0.30 0.42
Steel on steel 0.57 0.74
Copper on steel 0.36 0.53
Teflon on teflon 0.04 -.--
Honey on Honey 2.6 negligible

About the Common uses in Physics

While these are indeed common usages, it should be pointed out that there are many other usages and that other
letters are used for the same purpose. The reason is quite simple: there are only so many symbols in the Greek and
Latin alphabets, and scientists and mathematicians generally do not use symbols from other languages. It is a
common trap to associate a symbol exclusively with some particular meaning, rather than learning and
understanding the physics and relations behind it.

43 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Greek Alphabet
Lower case Capital Name Common use in Physics
Angular acceleration
Linear expansion
alpha Coefficient
Alpha particle (helium nucleus)
Fine Structure Constant
Beta particle — high energy electron
beta
Sound intensity
Gamma ray (high energy EM wave)
gamma Ratio of heat capacities (in an ideal gas)
Relativistic correction factor
Δ="Change in"
delta
δ="Infinitessimal change in"
Emissivity
Strain
epsilon
Permittivity
EMF
zeta (no common use)

Viscosity
eta
Energy efficiency
Angle (°, rad)
theta
Temperature

iota Imaginary unit ( )

kappa Spring constant

Wavelength
Thermal conductivity
lambda Constant
Eigenvalue of a matrix
Linear density
Coefficient of friction
mu Reduced mass
Permeability
nu Frequency
xi Damping cofficient

omicron (no common use)

Product symbol Π
pi
Circle number π: = 3.14159...
Volume density
rho
Resistivity
Sum symbol
Boltzmann constant
sigma Uncertainty
Stress
Surface density

44 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

See Also
Greek alphabet on the Wikipedia

Review of logs
Been a while since you used logs ? Here is a quick refresher for you.

A log (short for logarithm) is an exponent.

Logs are in base 10. An increase of "1" in a log is equivalent to an increase by a power of 10 in normal notation. In
logs, "3" is 100 times the size of "1".

therefore: log(10–12) = –12

also: log(1000) = 3

logA + logB = log(AB)

logA – logB = log(A/B)

log(AB) = B log(A)

Adding the log of A to the log of B will give the same result as taking the log of the product A times B.

Subtracting the log of B from the log of A will give the same result as taking the log of the quotient A divided by B.

The log of (A to the Bth power) is equal to the product (B times the log of A).

A few examples:
log(2) + log(3) = log(6)
log(30) – log(2) = log(15)
log(8) = log(23) = 3log(2) Vectors are quantities that are characterized by having both a numerical quantity (called
the "magnitude" and denoted as |v|) and a direction. Velocity is an example of a vector; it describes the time rated
change in position with a numerical quantity (meters per second) as well as indicating the direction of movement.

The definition of a vector is any quantity that adds according to the parallelogram law (there are some physical
quantities that have magnitude and direction that are not vectors).

Scalars are quantities in physics that have no direction. Mass is a scalar; it can describe the quantity of matter with
units (kilograms) but does not describe any direction.

Multiplying vectors and scalars

45 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

A scalar times a scalar gives a scalar result.

A vector scalar-multiplied by a vector gives a scalar result (called the dot-product).
A vector cross-multiplied by a vector gives a vector result (called the cross-product).
A vector times a scalar gives a vector result.

Frequently Asked Questions about Vectors

Q: What is a "dot-product"?

A:

A Man walking up a hill

Let's take gravity as our force. If you jump out of an airplane and fall you will pick up speed. (for simplicity's sake,
let's ignore air drag). To work out the kinetic energy at any point you simply multiply the value of the force caused
by gravity by the distance
moved in the direction of the force. For example, a 180 N boy falling a distance of 10 m will have 1800 J of extra
kinetic energy. We say that the man has had 1800 J of work done on him by the force of gravity.

Notice that energy is not

a vector. It has a value but no direction. Gravity and displacement are vectors. They have a value plus a direction.
(In this case, their directions are down and down respectively) The reason we can get a scalar energy from vectors
gravity and displacement is because, in this case, they happen to point in the same direction. Gravity acts
downwards and displacement is also downwards.

When two vectors point in the same direction, you can get the scalar product by just multiplying the value of the two
vectors together and ignoring the direction.

But what happens if they don't point in the same direction?

Consider a man walking up a hill. Obviously it takes energy to do this because you are going against the force of
gravity. The steeper the hill, the more energy it takes every step to climb it. This is something we all know unless we
live on a salt lake.

In a situation like this we can still work out the work done. In the diagram, the green lines represent the
displacement. To find out how much work against gravity the man does, we work out the projection of the
displacement along the line of action of the force of gravity. In this case it's just the y component of the man's
displacement. This is where the cos θ comes in. θ is merely the angle between the velocity vector and the force
vector.

If the two forces do not point in the same direction, you can still get the scalar product by multiplying the projection
of one force in the direction of the other force. Thus:

There is another method of defining the dot product which relys on components.

46 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Q: What is a "cross-product"?

A:
Suppose there is a charged particle moving in a constant magnetic field. According to the laws of electromagnetism,
the particle is acted upon by a force called the Lorentz force. If this particle is moving from left to right at 30 m/s
and the field is 30 teslas pointing straight down perpendicular to the particle, the particle will actually curve in a
circle spiraling out of the plane of the two with an acceleration of its charge in coulombs times 900 newtons per
coulomb! This is because the calculation of the Lorentz force involves a cross-product.

A cross product can be calculated simply using the angle between the two vectors and your right hand. If the forces
point parallel or 180° from each other, it's simple: the cross-product does not exist. If they are exactly perpendicular,
the cross-product has a magnitude of the product of the two magnitudes. For all others in between however, the
following formula is used:

But if the result is a vector, then what is the direction? That too is fairly simple, utilizing a method called the
"right-hand rule".

The right-hand rule works as follows: Place your right-hand flat along the first of the two vectors with the palm
facing the second vector and your thumb sticking out perpendicular to your hand. Then proceed to curl your hand
towards the second vector. The direction that your thumb points is the direction that cross-product vector points!
Though this definition is easy to explain visualy it is slightly more complicated to calculate than the dot product.

Q:How do you draw vectors

47 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

A:

How to draw vectors in the

plane of the paper

Standard symbols
of a vector going
into or out of a
page

Vectors in the lane of the page are drawn as arrows on the page. A vector that goes into the plane of the screen is
typically drawn as circles with an inscribed X. A vector that comes out of the plane of the screen is typically drawn
as circles with dots at their centers. The X is ment to represent the fletching on the back of an arow or dart while the
dot is ment to represent the tip of the arrow.

GNU Free Documentation License

Version 1.2, November 2002

Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.

51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.

0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other functional and useful document "free" in the
sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it,
either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to
get credit for their work, while not being considered responsible for modifications made by others.

This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in
the same sense. It complements the GNU General Public License, which is a copyleft license designed for free
software.

We have designed this License in order to use it for manuals for free software, because free software needs free
documentation: a free program should come with manuals providing the same freedoms that the software does. But
this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or
whether it is published as a printed book. We recommend this License principally for works whose purpose is
instruction or reference.

48 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

1. APPLICABILITY AND DEFINITIONS

This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright
holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free
license, unlimited in duration, to use that work under the conditions stated herein. The "Document", below, refers to
any such manual or work. Any member of the public is a licensee, and is addressed as "you". You accept the license
if you copy, modify or distribute the work in a way requiring permission under copyright law.

A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied
verbatim, or with modifications and/or translated into another language.

A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with
the relationship of the publishers or authors of the Document to the Document's overall subject (or to related
matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a
textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter
of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or
political position regarding them.

The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant
Sections, in the notice that says that the Document is released under this License. If a section does not fit the above
definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero
Invariant Sections. If the Document does not identify any Invariant Sections then there are none.

The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in
the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words,
and a Back-Cover Text may be at most 25 words.

A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification
is available to the general public, that is suitable for revising the document straightforwardly with generic text
editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing
editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for
input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup,
has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format
is not Transparent if used for any substantial amount of text. A copy that is not "Transparent" is called "Opaque".

Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format,
LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML,
PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and
JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors,
SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated
HTML, PostScript or PDF produced by some word processors for output purposes only.

The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold,
legibly, the material this License requires to appear in the title page. For works in formats which do not have any
title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the
beginning of the body of the text.

A section "Entitled XYZ" means a named subunit of the Document whose title either is precisely XYZ or contains
XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section
name mentioned below, such as "Acknowledgements", "Dedications", "Endorsements", or "History".) To "Preserve
the Title" of such a section when you modify the Document means that it remains a section "Entitled XYZ"
according to this definition.

The Document may include Warranty Disclaimers next to the notice which states that this License applies to the
Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as
regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no
effect on the meaning of this License.

49 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that
this License, the copyright notices, and the license notice saying this License applies to the Document are
reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use
technical measures to obstruct or control the reading or further copying of the copies you make or distribute.
However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies
you must also follow the conditions in section 3.

You may also lend copies, under the same conditions stated above, and you may publicly display copies.

3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering
more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that
carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the
back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover
must present the full title with all words of the title equally prominent and visible. You may add other material on
the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the
Document and satisfy these conditions, can be treated as verbatim copying in other respects.

If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as
fit reasonably) on the actual cover, and continue the rest onto adjacent pages.

If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a
machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a
computer-network location from which the general network-using public has access to download using
public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use
the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity,
to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the
last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.

It is requested, but not required, that you contact the authors of the Document well before redistributing any large
number of copies, to give them a chance to provide you with an updated version of the Document.

4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above,
provided that you release the Modified Version under precisely this License, with the Modified Version filling the
role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a
copy of it. In addition, you must do these things in the Modified Version:

A.
Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of
previous versions (which should, if there were any, be listed in the History section of the Document). You
may use the same title as a previous version if the original publisher of that version gives permission.
B.
List on the Title Page, as authors, one or more persons or entities responsible for authorship of the
modifications in the Modified Version, together with at least five of the principal authors of the Document (all
of its principal authors, if it has fewer than five), unless they release you from this requirement.
C. State on the Title page the name of the publisher of the Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
F.
Include, immediately after the copyright notices, a license notice giving the public permission to use the
Modified Version under the terms of this License, in the form shown in the Addendum below.
G.

50 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the
Document's license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title, and add to it an item stating at least the title, year,
new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled
"History" in the Document, create one stating the title, year, authors, and publisher of the Document as given
on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
J.
Preserve the network location, if any, given in the Document for public access to a Transparent copy of the
Document, and likewise the network locations given in the Document for previous versions it was based on.
These may be placed in the "History" section. You may omit a network location for a work that was published
at least four years before the Document itself, or if the original publisher of the version it refers to gives
permission.
K.
For any section Entitled "Acknowledgements" or "Dedications", Preserve the Title of the section, and preserve
in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given
therein.
L.
Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers
or the equivalent are not considered part of the section titles.
M. Delete any section Entitled "Endorsements". Such a section may not be included in the Modified Version.
N.
Do not retitle any existing section to be Entitled "Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.

If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and
contain no material copied from the Document, you may at your option designate some or all of these sections as
invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These
titles must be distinct from any other section titles.

You may add a section Entitled "Endorsements", provided it contains nothing but endorsements of your Modified
Version by various parties--for example, statements of peer review or that the text has been approved by an
organization as the authoritative definition of a standard.

You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover
Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one
of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already
includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you
are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the
previous publisher that added the old one.

The author(s) and publisher(s) of the Document do not by this License give permission to use their names for
publicity for or to assert or imply endorsement of any Modified Version.

5. COMBINING DOCUMENTS
You may combine the Document with other documents released under this License, under the terms defined in
section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of
all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its
license notice, and that you preserve all their Warranty Disclaimers.

The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be
replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make
the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or
publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list
of Invariant Sections in the license notice of the combined work.

51 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

In the combination, you must combine any sections Entitled "History" in the various original documents, forming
one section Entitled "History"; likewise combine any sections Entitled "Acknowledgements", and any sections
Entitled "Dedications". You must delete all sections Entitled "Endorsements."

6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released under this License, and
replace the individual copies of this License in the various documents with a single copy that is included in the
collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all
other respects.

You may extract a single document from such a collection, and distribute it individually under this License,
provided you insert a copy of this License into the extracted document, and follow this License in all other respects
regarding verbatim copying of that document.

7. AGGREGATION WITH INDEPENDENT WORKS

A compilation of the Document or its derivatives with other separate and independent documents or works, in or on
a volume of a storage or distribution medium, is called an "aggregate" if the copyright resulting from the
compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit.
When the Document is included in an aggregate, this License does not apply to the other works in the aggregate
which are not themselves derivative works of the Document.

If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is
less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the
Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form.
Otherwise they must appear on printed covers that bracket the whole aggregate.

8. TRANSLATION
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms
of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders,
but you may include translations of some or all Invariant Sections in addition to the original versions of these
Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and
any Warranty Disclaimers, provided that you also include the original English version of this License and the
original versions of those notices and disclaimers. In case of a disagreement between the translation and the original
version of this License or a notice or disclaimer, the original version will prevail.

If a section in the Document is Entitled "Acknowledgements", "Dedications", or "History", the requirement (section
4) to Preserve its Title (section 1) will typically require changing the actual title.

9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this
License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically
terminate your rights under this License. However, parties who have received copies, or rights, from you under this
License will not have their licenses terminated so long as such parties remain in full compliance.

10. FUTURE REVISIONS OF THIS LICENSE

The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address
new problems or concerns. See http://www.gnu.org/copyleft/.

Each version of the License is given a distinguishing version number. If the Document specifies that a particular

52 of 53 10/7/2007 3:32 AM
Physics Study Guide/Print version - Wikibooks, collection of open-co... http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version

numbered version of this License "or any later version" applies to it, you have the option of following the terms and
conditions either of that specified version or of any later version that has been published (not as a draft) by the Free
Software Foundation. If the Document does not specify a version number of this License, you may choose any
version ever published (not as a draft) by the Free Software Foundation.

Retrieved from "http://en.wikibooks.org/wiki/Physics_Study_Guide/Print_version"

This page was last modified 07:07, 12 May 2007.

All text is available under the terms of the GNU Free Documentation License (see Copyrights for details).
Wikibooks® is a registered trademark of the Wikimedia Foundation, Inc.

53 of 53 10/7/2007 3:32 AM