INTERACTIVE SCHEMATIC

Bookmarks X
*This document is best viewed at a
Options
screen resolution of 1024 X 768.
Features
Cover Page
To set your screen resolution do the following:
Tables RIGHT CLICK on the DESKTOP.
Component Select PROPERTIES.
Connector
CLICK the SETTINGS TAB.
Schematic
Machine Views
MOVE THE SLIDER under SCREEN RESOLUTION
Chassis View until it shows 1024 X 768.
Cab View CLICK OK to apply the resolution.
Engine View
*Due to different monitor sizes and PDF reader preferences
The Bookmarks panel will allow you to there may be some variance in linked schematic locations
quickly navigate to points of interest.

Click here to save a copy of

EC-C2 E-C60 this interactive schematic
EC-C3
to your desktop
E-C61

VIEW ALL CALLOUTS

EC-C1
When only one callout is showing on a
machine view, clicking on this button will
Click on any text that is BLUE and make all of the callouts visible. This
underlined. These are hyperlinks button is located in the top right corner
that can be used to navigate the of every machine view page.
schematic and machine views.

ELECTRICAL SYMBOLS BASIC HYDRAULIC

HOTKEYS (Keyboard Shortcuts) COMPONENT SYMBOLS
T

Pressure Temperature Level Flow

Pump

FUNCTION KEYS
Switch Switch Switch Switch Circuit Breaker
or Motor Variability

Click here to view the

Zoom In “CTRL” / “+” Schematic Symbols
Fluid
Conditioner
Spring
(Adjustable)

Zoom Out “CTRL” / “-” and Definitions page

Fit to Page “CTRL” / “0” (zero)

Hand Tool “SPACEBAR” (hold down)
Find “CTRL” / “F”
Search “CTRL” / “SHIFT” / “F”
 RENR6219-03
June 2017

988H Wheel Loader Tier 3

Hydraulic System
BXY1-3999

© 2017 Caterpillar, All Rights Reserved Printed in U.S.A.

SCHEMATIC SYMBOLS AND DEFINITIONS

VALVES INTERNAL PASSAGEWAYS PUMPS BASIC HYDRAULIC

ENVELOPES FLOW IN ONE
DIRECTION
FLOW ALLOWED IN
EITHER DIRECTION
PARALLEL
FLOW
CROSS
FLOW
FIXED DISPLACEMENT
COMPONENT SYMBOLS

One Position Two Position Three Position Unidirectional Bidirectional Pump

Infinite Two Three Variability
Positioning Position Position or Motor
PORTS VARIABLE DISPLACEMENT
NON- COMPENSATED

CYLINDERS Fluid Spring

(Adjustable)
Two-way Three-Way Four-Way Conditioner
Unidirectional Bidirectional
CONTROL
AB AB
Single Acting Double Acting
MOTORS Pressure
FIXED DISPLACEMENT Spring
P T P T Compensation
Normal Position Shifted Position Infinite Position

CHECK
Control
ACCUMULATORS Unidirectional Bidirectional
Valves
Line Restriction
(Variable)
VARIABLE DISPLACEMENT
Basic Spring Shuttle NON- COMPENSATED
Pilot
Symbol Loaded Line Restriction
Controlled Spring Loaded Gas Charged Restriction
(Fixed)

Unidirectional Bidirectional

MAIN AUX.
Line Restriction
PILOT CONTROL 2-Section
RELEASED PRESSURE ROTATING SHAFTS Variable and Pressure
Compensated
Pump

Unidirectional Bidirectional
External Return Internal Return
Attachment Pump: Variable and
REMOTE SUPPLY PRESSURE Pressure Compensated

Internal Hydraulic Pneumatic

Simplified Complete Supply Pressure Energy Triangles

COMBINATION CONTROLS
LINES MEASUREMENT

Solenoid Solenoid Solenoid Solenoid and Servo Thermal Detent Crossing Joining
or Manual and Pilot Pilot or Manual Pressure Temperature Flow

MANUAL CONTROL FLUID STORAGE RESERVOIRS

Push-pull Lever Manual Shutoff General Manual Push Button Pedal Spring Vented Pressurized Return Above Fluid Level Return Below Fluid Level

HYDRAULIC SYMBOLS - ELECTRICAL ELECTRICAL SYMBOLS

G
M T

Pressure Temperature Level Flow

Transducer Transducer Generator Electric Pressure Pressure Switch Temperature Electrical
Switch Switch Switch Switch Circuit Breaker
(Fluid) (Gas / Air) Motor Switch (Adjustable) Switch Wire

BASIC ELECTRICAL COMPONENT SYMBOLS HARNESS AND WIRE SYMBOLS

Wire, Cable, or Harness Assembly Identification:
Fuse: A component in an electrical circuit that will open the circuit if too much current flows through it. Includes Harness Identification Letters and Harness
Connector Serialization Codes (see sample).
Switch (Normally Open): A switch that will close at a specified point (temp, press, etc.). The circle indicates
that the component has screw terminals and a wire can be disconnected from it.
AG-C4 L-C12
Switch (Normally Closed): A switch that will open at a specified point (temp, press, etc.). 111-7898 3E-5179
No circle indicates that the wire cannot be disconnected from the component. Part Number: for 1
Connector Plug
Ground (Wired): This indicates that the component is connected to a grounded wire. 2
The grounded wire is fastened to the machine.
Plug Receptacle
Pin or Socket Number
Ground (Case): This indicates that the component does not have a wire connected to ground.
It is grounded by being fastened to the machine. Harness Identification Letter(s): (A, B, C, AA, AB, AC, ...)

Reed Switch: A switch whose contacts are controlled by a magnet. A magnet closes the contacts of Harness Connector Serialization Code: The "C" stands for
"Connector" and the number indicates which connector in the
a normally open reed switch; it opens the contacts of a normally closed reed switch.
harness (C1, C2, C3, ...)
L-C12
Sender: A component that is used with a temperature or pressure gauge. 3E-5179
The sender measures the temperature or pressure.
T Its resistance changes to give an indication to the gauge of the temperature or pressure. 5A
Component
Relay (Magnetic Switch): A relay is an electrical component that is activated by electricity. Fuse (5 Amps) 9X-1123 Part Number
It has a coil that makes an electromagnet when current flows through it.
The electromagnet can open or close the switch part of the relay. 325-AG135 PK-14
Harness identification code:
This example indicates wire group 325, Wire Gauge
Solenoid: A solenoid is an electrical component that is activated by electricity. wire 135 in harness "AG". Wire Color
It has a coil that makes an electromagnet when current flows through it.
The electromagnet can open or close a valve or move a piece of metal that can do work. 1 Deutsch connector: Typical representation
of a Deutsch connector. The plug contains all
2 sockets and the receptacle contains all pins.
Magnetic Latch Solenoid: An electrical component that is activated by electricity and held latched by a
permanent magnet. It has two coils (latch and unlatch) that make electromagnet 1 Sure-Seal connector: Typical representation
when current flows through them. It also has an internal switch that places of a Sure-Seal connector. The plug and receptacle
2 contain both pins and sockets.
the latch coil circuit open at the time the coil latches.
COMPONENT LOCATION
Part Schematic Part Schematic
Item Description Item Description
Number Location Number Location
Steering and Brake System Implement System
1 TANK AS. 152-3870 B-3 212-8712
52 VALVE-GP-CONTROL 212-8746 D-8
2 TANK GP 153-3602 B-3
212-8721
3 SCREEN AS. 9T-9227 B-2,B-3
53 VALVE GP-PRESSURE CONT 6E-4286 D-8
4 SCREEN GP 7J-2656 B-2,B-3
54 VALVE GP-SHUTTLE 4T1860 D-8
5 SCREEN 178-0182 B-2
55 VALVE GP-RELIEF 125-9349 D-7
6 TUBE-BAFFLE 1U-1570 B-2
56 VALVE GP-RELIEF 117-0161 D-8
7 VALVE GP-PILOT 143-2855 B-4 57 VALVE GP-RELIEF 117-0161 D-7
8 ACCUMULATOR GP 220-1432 F-2 58 VALVE GP-RELIEF 117-0160 D-7
9 COOLER 164-0058 C-2 117-0159
59 VALVE GP-RELIEF C-6
10 VALVE GP-COOLER BYPASS 6E-1454 C-2 143-8912
11 VALVE GP-BRAKE 133-7102 E-2 60 ACTUATOR GP 217-6719 C-7
12 FILTER GP 115-2129 C-2 61 VALVE-FLOAT 100-6731 C-8
13 PUMP GP-SUPPLEMENTAL STER 150-7585 C3 62 VALVE 6E-1291 C-8
63 ACTUATOR GP 217-6720 D-7
133-8608
14 VALVE GP-STER D-3 64 VALVE 102-4156 C-6,C-7
133-8609
65 VALVE GP-RELIEF 172-5481 D-7
15 VALVE GP-SHUTTLE 4T-1860 D-4
16 VALVE GP-RELIEF 6E-6188 D-4 CYL GP-LIFT 173-8613
66 E-8
17 VALVE GP-PRESS REDUCING 6E-4286 D-4 CYL GP-LIFT (LOGGER) 168-6943
18 VALVE GP-RELIEF 9T-7419 D-4 CYL GP-TILT 231-1955
19 PLUG-ORIFICE 1T-0936 D-4 67 CYL GP-TILT (LOGGER) 191-3468 E-7
20 VALVE GP-RELIEF 6E-3986 D-3 CYL GP-TILT(HIGH LIFT) 152-1644
21 VALVE GP-DIVERTER 2U-7345 D-3 CYL GP-LIFT 173-8612
68 E-6
CYL GP LIFT(LOGGER) 168-6942
22 CYLINDER GP-RIGHT 135-3288 E-4
23 CYLINDER GP-LEFT 133-8173 E-4 69 PUMP GP-IMPLEMENT 216-8978 B-7
24 VALVE GP-CHECK 149-4617 C-4 70 IMPELLER 146-8990 B-7
25 VALVE GP-NEUTRALIZER 146-7571 C-4 71 COIL AS. 148-2350 B-7

26 PUMP GP-STEER 153-9624 C-3 72 VALVE GP-CHECK 9T-3096 D-8

27 VALVE GP-COMP 176-7520 C-3 73 VALVE GP-CHECK 104-7108 B-8
28 VALVE GP-COMP 176-7521 C-3
74 VALVE GP-SOLENOID 151-7455 B-8
29 PUMP GP-BRAKE/PILOT 177-8924 B-1 75 VALVE GP-SOLENOID 149-2610 B-8
30 VALVE GP 189-8628 C-1
76 FILTER 166-4647 B-6
31 VALVE GP 186-6218 C-2 77 VALVE GP-BALL 112-1817 B-8
32 VALVE GP-RELIEF 139-3544 C-2
78 VALVE GP 9T-9552 C-6
33 VALVE - FLUID SAMPLING 8C-3446 C-1 79 VALVE GP-SOLENOID 152-8340 C-6
34 VALVE GP-CHECK 3G-8607 B-1 80 ORIFICE 8J-6815 C-6
35 FILTER 166-4647 B-2
81 ADAPTER 204-7143 B-7
36 VALVE GP-SELECTOR 6E-5566 C-3
82 SENSOR GP 143-9176 B-7
37 MOTOR GP-PISTON 213-5268 C-2
83 VALVE GP-SHUTTLE 141-1481 B-5
38 VALVE GP-CHECK 9T-3752 C-1
84 VALVE GP-CHECK 207-1810 B-5
228-3636 85 ACCUMULATOR 219-7983 D-5
39 PUMP GP-FAN B-1
228-3638 Axle Cooling System
40 VALVE GP-COMP 207-0695 B-1 86 MOTOR GP - FAN 178-1602 F-8
87 CORE AS. 173-6753 F-7
41 VALVE-CHECK 9T-3096 C-4
88 VALVE-CHECK 9T-5134 F-8
42 VALVE-CHECK 104-7108 C-4
89 VALVE GP - SOLENOID 149-2610 F-8
133-1963
43 VALVE GP-BREAKER & RELIEF B-2 90a FILTER GP-SCREEN (FRONT AXLE) 230-3633 F-7
220-0812
44 TANK GP-EXPANSION 220-2948 B-2 90b FILTER GP-SCREEN (REAR AXLE) 230-3633 F-7

45 SWITCH AS.-PRESSURE 175-3244 E-2 91 PUMP GP 229-0659 F-6

46 VALVE GP 200-0866 F-3 92 PUMP GP 260-3160 F-8
47 CONTROL GP-FOOT BRAKE 169-8258 F-3
48 VALVE GP-BRAKE 106-1774 F-2
49 SWITCH AS.-PRESSURE 174-4312 F-1
50 BRAKE GP-PARK-B 174-1552 F-1
51 SENSOR GP-TEMP 131-0427 F-4,E-4
TAP LOCATION

Tap Locations
Pressure, Sampling, and Sensor
Tap Schematic
Description
Number Location

A MAIN SYS RLF B-8

B LIFT ROD END LINE RELIEF D-8
C LIFT HEAD END LINE RELIEF D-8
D AUX LINE RELIEF D-7
E AUX LINE RELIEF D-7
F PILOT SUPPLY C-2
G STEER PUMP CUTOFF C-3
H BRAKE CHARGE B-1
I FAN DRIVE SIGNAL B-1
J FRONT BRAKE ACCUMULATOR F-2
K REAR BRAKE ACCUMULATOR F-2
L FRONT BRAKE SUPPLY F-4
M REAR BRAKE SUPPLY F-4
 8 7 6 5 4 3 2 1

(88) VALVE
CHECK
9T-5134 (90a) FILTER GP
SCREEN (FRONT AXLE)
(89) VALVE GP 230-3633 FRONT AXLE
SOLENOID (86) MOTOR GP
149-2610 FAN (87) CORE AS
FRONT AXLE

178-1602 173-6753 (91) PUMP GP (50) BRAKE GP

229-0659 (47) CONTROL GP PARK B
FOOT BRAKE (8) ACCUMULATOR GP 174-1552 F
F 169-8258 220-1432

(48) VALVE GP
(51) SENSOR GP BRAKE
M TEMPERATURE 106-1774
(46) VALVE GP (49) SWITCH AS
(92) PUMP GP 131-0427 REAR BRAKE SUPPLY 200-0866
K
PRESSURE
260-3160 L 174-4312
(90b) FILTER GP FRONT BRAKE SUPPLY J
SCREEN (REAR AXLE)
230-3633

REAR AXLE (51) SENSOR GP

TEMPERATURE (45) SWITCH AS
131-0427 WARNING SWITCH
PRESSURE
988H AXLE COOLING SYSTEM 175-3244

(11) VALVE GP
BRAKE
133-7102
E
E
(66) CYLINDER GP LIFT TILT LIFT (68) CYLINDER GP
REAR AXLE

LIFT : 173-8613 CYLINDER CYLINDER CYLINDER LIFT : 173-8612

LIFT (LOGGER) : 168-6943 (67) CYLINDER GP LIFT (LOGGER) : 168-6942
TILT : 231-1955
TILT (LOGGER) : 191-3468
TILT (HIGH LIFT) : 152-1644 (23) CYLINDER GP STEERING (22) CYLINDER GP
LEFT CYLINDERS RIGHT
133-8173 135-3288

(53) VALVE GP
PRESSURE CONT
(52) VALVE GP 6E-4286
CONTROL C B (14) VALVE GP
212-8712 (58) VALVE GP STER
(54) VALVE GP
(57) VALVE GP D E 133-8608
212-8746 SHUTTLE RELIEF (65) VALVE GP (18) VALVE GP (15) VALVE GP (21) VALVE GP
212-8721 RELIEF 117-0160 133-8609
4T-1860 RELIEF RELIEF SHUTTLE DIVERTER
117-0161
172-5481 9T-7419 4T-1860 2U-7345
(55) VALVE GP
RELIEF
125-9349

D (20) VALVE GP D
(56) VALVE GP (16) VALVE GP
RELIEF
RELIEF (85) ACCUMULATOR RELIEF
6E-3986
117-0161 219-7983 6E-6188

(63) ACTUATOR GP LOWER RACK

217-6720 (63) ACTUATOR GP
217-6720 (19) PLUG
ORIFICE (17) VALVE GP
1T-0936 PRESS REDUCING
6E-4286 (13) PUMP GP
(78) VALVE GP
SUPPLEMENTAL STER
(64) VALVE 9T-9552 RIDE
150-7585 (31) VALVE GP (32) VALVE GP
102-4156
(72) VALVE GP CONTROL 186-6218 RELIEF
CHECK (36) VALVE GP 139-3544
9T-3096 (41) VALVE SELECTOR
CHECK 6E-5566
(61) VALVE
FLOAT
9T-3096 F
100-6731 (80) ORIFICE
(63) ACTUATOR GP (59) VALVE GP 8J-6815 WARNING

(64) VALVE 217-6720 RELIEF (24) VALVE GP

SWITCH

102-4156 (64) VALVE 117-0159 CHECK

102-4156 143-8912 (9) COOLER
149-4617
(10) VALVE GP 164-0058 (37) MOTOR GP
(42) VALVE
COOLER BYPASS PISTON
CHECK (28) VALVE GP
6E-1454 213-5268
104-7108 COMP (12) FILTER GP
(79) VALVE GP (38) VALVE GP
(62) VALVE 176-7521 115-2129
SOLENOID RIGHT LEFT
CHECK
6E-1291 152-8340 NEUTRALIZER NEUTRALIZER C
C 9T-3752
RAISE PUMP
DUMP (27) VALVE GP CASE
(60) ACTUATOR GP COMP FILL
PORT (33) VALVE GP
217-6719 176-7520 FLUID
FLUID SAMPLING
(60) ACTUATOR GP SAMPLING
PORT 8C-3446
217-6719 G
PUMP
(7) VALVE GP CASE
PILOT AIR
143-2855 (26) PUMP GP BLEED (30) VALVE GP
STEER 189-8628
STEER (25) VALVE GP 153-9624 (35) FILTER FAN SPEED

NEUTRALIZER 166-4647
146-7571

HYDRAULIC
ON/OFF I
(77) VALVE GP (43) VALVE GP
(75) VALVE GP
BALL BREAKER AND RELIEF
SOLENOID
112-1817 133-1963
149-2610
220-0812
A (82) SENSOR GP (84) VALVE GP (83) VALVE GP
143-9176 (71) COIL AS
CHECK SHUTTLE H
148-2350
(74) VALVE GP 207-1810 141-1481
SOLENOID
151-7455 PUMP CASE (2) TANK GP B
B
(81) ADAPTER FILL PORT 153-3602 (40) VALVE GP
(44) TANK GP COMP
204-7143 (34) VALVE GP
PUMP CASE IMPL PILOT SUPPLY (3) SCREEN AS EXPANSION 207-0695
CHECK
(73) VALVE GP
AIR BLEED 9T-9227 220-2948 3G-8607
CHECK (1) TANK AS (39) PUMP GP
104-7108 IMPL RETURN 152-3870 (3) SCREEN AS FAN
(4) SCREEN GP 9T-9227 (6) TUBE
PUMP CASE DRAIN 228-3636
7J-2656 BAFFLE
(5) SCREEN 228-3638
1U-1570 (29) PUMP GP
(76) FILTER BRAKE VALVE RETURN 178-0182 BRAKE / PILOT
(70) IMPELLER 166-4647 (4) SCREEN GP 177-8924
(69) PUMP GP
146-8990 7J-2656
IMPLEMENT AIR BLEED
216-8978

IMPL PUMP INLET

IMPLEMENT SYSTEM STEERING AND BRAKE SYSTEM

LINES GROUP COLOR DESCRIPTIONS

MAIN PUMP OUTPUT LINE PATTERNS
COOLING FAN CIRCUIT
PILOT/BRAKE PUMP OUTPUT Pressure Line
SUPPLY LINE
A DRAIN / RETURN LINE Pilot / Load Sensing Pressure
A
STEERING CIRCUIT
Drain / Return Lines
AXLE COOLING CIRCUIT
AXLE COOLING PUMP Component Group
BRAKE CIRCUIT
CALLOUTS
LIFT CIRCUIT
THIS SCHEMATIC IS FOR THE 988H WHEEL LOADER TIER 3 HYDRAULIC SYSTEM
IMPLEMENT VALVE LOCK CONTROL CIRCUIT YY Taps (Pressure, Sampling, Sensor - by letter)
TILT CIRCUIT MEDIA NUMBER: RENR6219-03
Callout Number Component
AUXILLARY CIRCUIT (Machine Location from (52) VALVE GP - CONTROL Name SCHEMATIC PART NUMBER: 225-5542, CHANGE: 04, VERSION: -
Component LocationsTable)
SUPPLEMENTAL STEERING 138-1234 Part Number
SCHEMATIC PART NUMBER: 260-0866, CHANGE: 00, VERSION: -
SCHEMATIC PART NUMBER: 259-3116, CHANGE: 04, VERSION: -
Components are shown installed on a fully operable machine with the key and engine off, transmission shifter
in neutral and with parking brake set.
Refer to the appropriate Service Manual for Troubleshooting, Specifications and Systems Operations.
Refer to the Parts Manual using a specific serial number prefix in SIS before ordering parts from this schematic.

8 7 6 5 4 3 2 1
COMPONENT AND TAP LOCATIONS
VIEW ALL CALLOUTS

82 81 70 71 69 29 89 26 G H 36 41 14 44 88 87 86 7 24 K J 49 33 48 90a 90b 46 L M 47 67 B C E 52 72 D

39

40

37

38

76

12

35

30

10
91 92 34 A 1 2 45 3 5 11 6 4 51 F 31 8 13 77 50 43 25 42 22 23 75 74 73 85 78 83 84 66 68
AXLE COOLING ASSEMBLY
VIEW ALL CALLOUTS

90a
88

86
90b

This view shows the axle cooling system components located on the inboard side of
the axle oil cooling assembly. The axle cooling fan motor (86) turns the fan to
draw air through the axle oil coolers. The rear pump (not shown) supplies oil flow
to turn the axle cooling fan motor. A relief valve (88) limits the oil pressure in
the rear axle cooling hydraulic system. The front axle oil filter (90a) and
the rear axle oil filter (90b) are also shown in this view.

87

The axle oil cooler assembly (87) is shown off the machine. The oil cooler assembly
is located on the left side of the machine above the fuel tank. The axle oil cooler
assembly is comprised of two sections with the front axle oil cooler in the lower
section, and the rear axle oil cooler in the upper section. The cooler assembly
removes the heat from the brake and differential oil and returns the oil to the axle
manifold. The cooler oil flows from the manifold and enters the axle at each brake
chamber and at the differential case.
BRAKE/PILOT PUMP
VIEW ALL CALLOUTS

29

The brake/pilot pump (29) is mounted to the right rear side of the pump drive.
The brake/pilot pump supplies oil flow to the brake hydraulic system and pilot
oil to the steering hydraulic system and the implement hydraulic system.

29

91

29. Brake/pilot pump

91. Axle cooling pumps
CONTROL VALVE GP
VIEW ALL CALLOUTS

59

60

64

65
57

56 63

61

62 55 58
53
54
HYDRAULIC PUMPS
VIEW ALL CALLOUTS

26
G

29
27
28

69

In this view, the access panel behind the cab is open, which provides access to the
hydraulic pumps.
26. Steering pump
28. Pump compensator valve
29. Brake/pilot pump
69. Implement pump
G. Steering system pressure tap

12
76

35

35. Steering pump case drain filter.

76. Implement pump case drain filter.
12. Fan pump case drain filter.
HYDRAULIC TANK ASSEMBLY
VIEW ALL CALLOUTS

43 33

K
J
12

32

8
8

2
F
8. Front brake accumulator
8. Rear brake accumulator
2. Hydraulic tank
32. Pilot relief valve
12. Pilot filter
43. Vacuum breaker relief valve
F. Pilot pressure tap
K. Rear Accumulator Pressure tap
J. Front Accumulator Pressure tap
33. S.O.S tap

11

45

The accumulator charging valve (11) is located on the right side of the machine between the hydraulic tank (2)
and the rear frame. The brake pressure switch (45) sends a signal to the Caterpillar Monitoring System.
NEUTRALIZER/QUAD CHECK VALVES
VIEW ALL CALLOUTS

25 25

24

The left and right neutralizer valves (25) are mounted at the articulation joint on top of the rear frame. The
quad check valve (24) is located on the rear frame to the rear of the neutralizer valves.
PARKING BRAKE/CONTROL VALVE
VIEW ALL CALLOUTS

49

48

The parking brake control valve (48) is located on the right frame rail below the
cab. The parking brake control valve directs oil flow to the parking brake. The
parking brake pressure switch (49) sends the park brake pressure status to the Power
Train ECM.

50

50. Parking brake

RIDE CONTROL
VIEW ALL CALLOUTS

78
80

79

The ride control solenoid (79) is located in the front frame behind and above the
front axle housing. The ride control solenoid is an ON/OFF solenoid. When the ride
control solenoid is energized the head end of the lift cylinders are connected to
the ride control accumulator to absorb the shock that occurs when roading
the machine. The ride control solenoid is a part of the ride control valve
group (78).

85

The ride control accumulator (85) is mounted horizontally along the inside of
the front right side of the frame, to the rear of the front axle housing.
SECONDARY STEERING PUMP

13

The secondary steering pump (13) is splined to the front of the transmission output transfer gear near the
articulation joint. The pump is ground driven and turns when the machine is moving. If the primary steering
pump fails or the engine stops while the machine is moving, the secondary steering pump supplies oil to the
steering system.
SERVICE BRAKE/VALVE
VIEW ALL CALLOUTS

46 M

The service brake valve (46) is located below the right brake pedal. The left and
right brake pedals are mechanically connected, allowing the service brake valve to
be actuated by either brake pedal. Also, front service brake oil pressure can be
checked at the front service brake pressure tap (L) and rear service brake oil
pressure can be checked at the rear service brake pressure tap (M).

Service
Brake

A hydraulically engaged, multiple disc service brake is located between the

planetaries and the differential at each axle. Each brake contains a piston, discs
and plates. When either brake pedal is depressed, pressure oil moves the piston which
compresses the discs against the plates. The heat from brake friction is removed
by the oil in the differential housing.
STEERING CONTROL VALVE
VIEW ALL CALLOUTS

17 18

15
19
16 20

21

36

The steering control valve is located below the cab on the left frame rail. The control valve directs steering system
oil to the steering cylinders and sends signal oil through the ball resolver. Control valve components shown above
are:
15. Ball resolver
16. Back-up relief valve
17. Pressure reducing valve
18. Crossover relief valve
20. Secondary relief valve
21. Diverter valve
36. Selector and pressure control valve

Warning
Switch

36

The steering pump pressure warning switch is located on the selector and pressure control valve (36) on top of
the fuel tank on the left side of the machine if the machine is equipped with secondary steering.