JY997D13501Q Side

B
Side
A JAPANESE
Side
B ENGLISH
1. Outline 2.1 Installation Method 3.5 System Requirements
The FX3U-USB-BD (hereinafter called USB-BD) is an expansion board equipped with 1) Power off the PLC. 0
IN 10
11

Item Specification

2
an USB port (Mini-B plug, female) for USB communication. Disconnect all the cables connected to the PLC.

1
11

0
T 10
OU

Microsoft Windows98*1, Windows98SE*1

FX3U-48M

By connecting the USB-BD and a personal computer with USB ports, program transfer Demount the PLC from the DIN rail. MR
/ES
-48M FX3U-48

to a PLC main unit and monitoring can be performed. 2) Using a flat head screwdriver as shown in the Microsoft WindowsMillennium Edition (Windows Me)*1
3U
FX

FX3U-USB-BD 1.1 Incorporated Items figure on the right, lift the dummy expansion board
cover (fig. A) making sure not to damage the
A
RU
N
Microsoft Windows2000*1
Microsoft WindowsXP*2,*3
P
STO

Verify that the following product and items are included in the package: circuit board or electronic parts.
USER'S MANUAL Product USB communication expansion board FX3U-USB-BD 1 3)
OS Microsoft Windows Vista*2,*3
Microsoft Windows7*4
3) Remove the dummy expansion board cover (fig.
M3 tapping screws 2 A) perpendicularly away from the main unit. Microsoft Windows8*5
Manual Number JY997D13501 Included
items
USB cable (3 m (118.1")) 1 Microsoft Windows8.1*6
Revision Q User's Manual (this manual) 1 Microsoft Windows 10*7
2)
Date March 2020 1.2 External Dimensions and Part Names GX Works2 (SWDNC-GXW2-E)
Software*8 GX Developer (SWD5C-GPPW-E)
[1] Unit: mm (inches) FX-PCS/WIN-E
This manual describes the part names, dimensions, mounting, and specifications [4] 4) Make sure the expansion board (fig. B) is in IN 10

[6] [5] parallel with the main unit (fig. C) and attach it to C
*1 Use the USB driver for Windows 98, Windows 98SE, Windows

0
T

of the product. Before use, read this manual and the manuals of all relevant
OU

[2] FX3U-48M

46.1 (1.81)
products fully to acquire proficiency in handling and operating the product. Make the expansion board connector.
-48M FX3U
-48
MR
/ES Millennium Edition and Windows 2000 included in the USB driver software
5) Fix the expansion board (fig. B) to the main unit Ver. 1.70.
RD

sure to learn all the product information, safety information, and precautions.
3U
FX

Store this manual in a safe place so that it can be taken out and read whenever SD using the provided M3 tapping screws (fig. D). N
*2 Use the USB driver for Windows XP and Windows Vista included in the
necessary. Always forward it to the end user. Tighten to a torque of 0.3 to 0.6 Nm USB driver software Ver. 1.70.
RU
P
STO

Registration: Microsoft, Windows, Windows Vista, and Windows XP are either [3] 5) *3 Only the 32-bit version of this operating system is supported.
registered trademarks or trademarks of Microsoft Corporation in the United States D *4 USB driver Ver. 1.30 or later is applicable to Windows 7 32-bit version.
53.5 (2.11) 19.6
and/or other countries. The company names, system names and product names B USB driver Ver. 1.40 or later is applicable to Windows 7 64-bit version.
(0.77) Special adapter connector 4)
mentioned in this manual are either registered trademarks or trademarks of their cover is removed Use the applicable USB driver for Windows 7 included in the USB driver
MASS (Weight) : Approx. 20 g (0.05 lbs) D
respective companies. In some cases, trademark symbols such as '' or '' are not software Ver. 1.70.
specified in this manual. USB cable (included with the product) [7] 3. Specifications *5 Use the USB driver for Windows 8 included in the USB driver software Ver. 1.70.
Effective March 2020 [9] *6 Use the USB driver for Windows 8.1 included in the USB driver software Ver. 1.70.
[8] 3.1 Applicable PLC
Specifications are subject to change without notice. *7 Use the USB driver for Windows 10 included in the USB driver software Ver. 1.70.
 2005 Mitsubishi Electric Corporation Model name Applicability *8 GX Developer Ver. 8.23Z or later is applicable to the FX3U Series PLC. Its
B

Ver. 8.13P or later is applicable to the FX3UC-32MT-LT Series PLC. Its Ver.
FX3U Series PLC Ver. 2.20 or later (from first production) 8.68W or later is applicable to the FX3UC-32MT-LT-2 Series PLC.
Safety Precautions (Read these precautions before use.) [1] Mounting holes (2-3.2) [6] Special adapter connector cover
FX3UC-32MT-LT(-2) Ver. 1.00 or later (from first production)
For further details concerning alternative inapplicable programming tool
[2] RD LED: Lighting while receiving data. [7] Special adapter connector setting, refer to the following manual.
This manual classifies the safety precautions into two categories: Refer to the FX3U Series User's Manual - Hardware Edition
(LED color: red) [8] USB Connector (To FX3U-USB-BD)  The expansion board cannot be connected to FX3UC Series PLCs other than the
and . Refer to the FX3UC Series User's Manual - Hardware Edition
[3] SD LED: Lighting while sending data. Mini-B plug male FX3UC-32MT-LT(-2).
(LED color: red) [9] USB Connector (To personal  Only one expansion board can be used per main unit. 4. System Configuration
Indicates that incorrect handling may cause hazardous computer) A plug male additional expansion boards such as the FX3U-232-BD, FX3U-422-BD or FX3U-485-
[4] USB Connector (Mini-B plug female) Connected equipment and connected cable
conditions, resulting in death or severe injury. BD cannot be installed/used together with the FX3U-USB-BD.
[5] Main unit connector - PLC Personal
For details on the system configuration, refer to the following manual.
Indicates that incorrect handling may cause hazardous - FX3U-USB-BD computer
2. Installation Refer to the FX Series User's Manual - Data Communication Edition
conditions, resulting in medium or slight personal injury USB driver Install
or physical damage. INSTALLATION 3.2 General Specifications software
PRECAUTIONS The general specifications are equivalent to the PLC main unit. For general
Depending on the circumstances, procedures indicated by may specifications, refer to the following manuals.
 Make sure to cut off all phases of the power supply externally before attempting USB cable for personal computer
also cause severe injury. However, please do not perform any dielectric withstand voltage tests or insulation
installation or wiring work. connection (included with the product)
It is important to follow all precautions for personal safety. resistance tests to this product.
Failure to do so may cause electric shock or damage to the product. USB
Refer to the FX3U Series User's Manual - Hardware Edition
port
Refer to the FX3UC Series User's Manual - Hardware Edition
Associated Manuals INSTALLATION

B
PRECAUTIONS 3.3 Power Supply Specification
For details of the programming communication, refer to the following manual.
Manual name Manual No. Description Item Specification Refer to the FX Series User's Manual - Data Communication Edition
 Use the product within the generic environment specifications described in PLC
FX3U Series JY997D16501 Explains FX3U Series PLC main unit manual (Hardware Edition).  15 mA / 5 V DC (5 V DC power is supplied from the
User’s Manual MODEL CODE: s p e c i f i c at i o n s f o r I / O , w i ri n g , Never use the product in areas with excessive dust, oily smoke, conductive dusts, main unit)
5. Connecting Procedure
- Hardware Edition 09R516 installation, and maintenance. corrosive gas (salt air, Cl 2 , H 2 S, SO 2 or NO 2 ), flammable gas, vibration or Current consumption 1) Power off the PLC.
 30 mA / 5 V DC (5 V DC power is supplied from the USB 2) Connect the USB (Mini-B plug male) connector of the USB cable to the
impacts, or expose it to high temperature, condensation, or rain and wind.
FX3UC Series JY997D28701 Explains FX3UC Series PLC connector of personal computer) FX3U-USB-BD.
If the product is used in such conditions, electric shock, fire, malfunctions,
User’s Manual MODEL CODE: s p e c i f i c at i o n s f o r I / O , w i ri n g , 3) Connect the USB (A plug male) connector of the USB cable to the personal
deterioration or damage may occur. 3.4 Communication Specifications computer.
- Hardware Edition 09R519 installation, and maintenance.
 Use screwdrivers carefully when performing installation work, thus avoiding 4) Turn ON the power supply of the PLC.
FX-USB-AW accident or product damage. Item Specification 5) Turn ON the power supply of the personal computer.
/FX3U-USB-BD Explains procedures for installing  When drilling screw holes or wiring, make sure cutting or wire debris does not Transmission 6. Driver Installation
User's Manual JY997D32601 the USB driver software for the FX- enter the ventilation slits. USB2.0 (For full speed)
USB-AW or FX3U-USB-BD. standard
- USB Driver Failure to do so may cause fire, equipment failures or malfunctions. Please connect the USB cable to the personal computer. Install USB driver
Installation Edition Photocoupler isolation software. For USB driver software, consult with your local Mitsubishi Electric sales
 Do not touch the conductive parts of the product directly. Isolation
(Between communication line and CPU) representative.
FX Series User’s Explains N:N network, Parallel Doing so may cause device failures or malfunctions.
JY997D16901 Caution
Manual - Data Link, Computer Link, Non-Protocol  Connect expansion board securely to their designated connectors. Maximum
MODEL CODE: 5 m (196.9") at most (Included cable is 3 m (118.1").)  Please confirm whether the installation is performed normally after the
Communication communication by RS and RS2 Loose connections may cause malfunctions. transmission distance
09R715 instructions/FX2N-232IF. installation of the driver. Regarding confirmation, refer to Chapter 7.
Edition
Baud Rate 9600/19200/38400/57600/115200 bps  The driver is not installed properly when the process is canceled during
The following section describes the installation method for the FX3U/FX3UC-32MT-LT
How to obtain manuals installation. To complete installation, uninstall the driver, and install again. For
(-2) Series PLC (FX3U Series PLC is used for the following example). Port USB (Mini-B plug female)
For product manuals or documents, consult with your local Mitsubishi Electric the uninstallation procedure of the driver, refer to the following manual.
For more details on installation and removal, refer to the PLC main unit manual. FX-USB-AW/FX3U-USB-BD User's Manual
sales representative. Refer to the FX3U Series User's Manual - Hardware Edition - USB Driver Installation Edition
Refer to the FX3UC Series User's Manual - Hardware Edition
Applicable standards  This product requires USB Driver Installation for each USB port to be used. To
FX3U-USB-BD units made in June, 2005 or later comply with the EC Directive (EMC use multiple USB ports, connect this product to each port, and install the driver
each time.
Directive). Further information can be found in the following manual. However, the The driver is not installed properly if the driver of a different version has already
FX3UC-32MT-LT does not comply with the EC Directive (EMC Directive). been installed. To complete installation, uninstall the driver, and install again.
Refer to the FX3U Series Hardware Manual (Manual No. JY997D50301) (With Windows Vista, Windows 7, Windows 8/8.1 or Windows 10, driver
Refer to the FX3UC-32MT-LT-2 Hardware Manual installation will occur automatically.
(Manual No. JY997D31601) In other OS, depending on the PC environment, driver installation may occur
Attention automatically, or the location for the file may be required to be specified.)
This product is designed for use in industrial applications.

USB driver software (Ver. 1.70) folder structure 4) The following screen is displayed. Check following: The status of the SD
1) "FX-USB-AW/FX3U-USB-BD" is displayed at A), as part of the list of the Contents
<Unzipped folder name> LED and RD LED.
<USB driver software file name> "Universal Serial Bus controllers".
<Win2000_ME_98> 2) "FX-USB-AW/FX3U-USB-BD (COM*)" is displayed at B), as part of the serial port Blinking Data receiving
The USB driver for Windows 98, Windows98SE, list.
• Confirm that the power is supplied to PLC.
Windows Millennium Edition (Me) and Windows 2000 is stored. * indicates the COM number used in FX3U-USB-BD.
• The PLC will not operate when a configuration that
<WinVista_XP> 3) is not displayed. exceeds the 5 V DC or 24 V DC capacity is used.
The USB driver for Windows XP and Windows Vista is stored. It will also be impossible to communicate normally.
Identification result:
<Win7> • Confirm that the specified cable is used to connect
The USB driver for Windows 7 32-bit version is stored.  If 1) through 3) are all confirmed, installation is normal. RD the personal computer and PLC.
Select the programming software COM number as the COM number currently OFF
<Win7_64> • Confirm that the communication settings, such as
assigned on the screen above. the COM number, and connected PLC are
The USB driver for Windows 7 64-bit version is stored.
 If any one of 1) through 3) is not satisfied, installation is not normal. correctly set in the software. Refer to the software
<Win8> (If the USB serial port software is not installed or the installation procedure is
The USB driver for Windows 8 is stored. manual.
canceled in process are possible causes) • Please check whether the driver can be installed
<Win8_1> In this case, please start the installation procedure again from the beginning, after normally. Regarding confirmation, refer to Chapter 6.
The USB driver for Windows 8.1 is stored. uninstalling the driver. For the installation procedure of the driver, refer to Chapter 6.
<Win10_32> For the uninstallation procedure of the driver, refer to the following manual.  When driver installation is required after already establishing USB communication.
The USB driver for Windows 10 32-bit version is stored. FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition  This product requires USB Driver Installation for each USB port to be
<Win10_64> 8. Uninstalling Driver connected. Connect the product to a driver-installed USB port, or install the
The USB driver for Windows 10 64-bit version is stored. driver for the current port.
For the uninstallation procedure of the driver, refer to the following manual.
Follow the same procedure as 1) to install the USB Serial Port software. FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition The driver is not installed properly if the driver of a different version has
6.1 Windows 98, Windows
98SE, Windows
Millennium 5) The screen of 2) is displayed. (Only in Windows XP) already been installed. To complete installation, uninstall the driver, and
9. Caution on use
Edition, Windows 2000, and Windows XP Click [ Continue Anyway ]. install again.
Please install the driver with the following procedure. 6) The completion screen is displayed. STARTUP AND
The installation procedure is explained when connecting to a personal computer Click [ Finish ]. MAINTENANCE
with Windows XP. The installation of the USB Serial Port software will finish. PRECAUTIONS
Next, please confirm whether the installation is performed normally. Regarding 「电器电子产品有害物质限制使用标识要求」的表示方式
 Installation methods for Windows 98, Windows 98SE, Windows
confirmation, refer to Chapter 7.  Before modifying or disrupting the program in operation or running the PLC,
Millennium Edition, and Windows 2000 will vary.
carefully read through this manual and the associated manuals and ensure the
1) When the USB cable is connected to the personal computer, the following 6.2 Windows Vista, Windows 7, Windows 8/8.1, Windows 10 safety of the operation.
screen is displayed. Note: This symbol mark is for China only.
For the installation procedure of the driver, refer to the following manual. An operation error may damage the machinery or cause accidents.
FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition
7. Installation Confirmation of Driver STARTUP AND 含有有害6物质的名称，含有量，含有部品
MAINTENANCE 本产品中所含有的有害6 物质的名称，含有量，含有部品如下表
Procedure for confirming the installation of the driver is described below.
PRECAUTIONS
Please perform the following procedure, where the FX3U-USB-BD is connected to the 所示。
personal computer.  Do not disassemble or modify the PLC.
Windows XP example follows. Doing so may cause fire, equipment failures, or malfunctions. 产品中有害物质的名称及含量
 In Windows XP, click [ Start ]  [ Control Panel ]  [ Performance and Maintenance ] * For repair, contact your local Mitsubishi Electric representative.
 [ System ]  [ Hardware ]  [ Device Manager ] and the window below will be  Do not drop the product or exert strong impact to it. 有害物质
displayed. Doing so may cause damage.
Please confirm the COM number to which the driver is allocated (COM and LPT). 部件名称 多溴
铅 汞 镉 六价铬 多溴联苯
 If using Windows 98, Windows 98SE, Windows Millennium Edition or DISPOSAL 二苯醚
PRECAUTIONS (Pb) (Hg) (Cd) (Cr(VI)) (PBB)
Windows 2000 (PBDE)
A screen that is equivalent to the one below is displayed by clicking [ My Computer ]
 Please contact a certified electronic waste disposal company for the
 [ Control Panel ]  [ System ]  [ Device Manager ] in the menu of the personal
environmentally safe recycling and disposal of your device. 可编程 外壳 ○ ○ ○ ○ ○ ○
computer. 控制器 印刷基板
 If using Windows Vista × ○ ○ ○ ○ ○
TRANSPORTATION AND
A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ Control
STORAGE PRECAUTIONS 本表格依据SJ/T 11364的规定编制。
Panel ]  [ Hardware and Sound ]  [ Device Manager ] in the menu of the personal
computer.  The product is a precision instrument. During transportation, avoid impacts larger
- Windows XP
Add a check mark to [ Install from a list or specific location (Advanced) ] and When user account control is enabled than those specified in the general specifications by using dedicated packaging ○:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572
click [ Next > ]. The window to select the installation path for the files will Only when user account control is enabled will the "user account control" screen be boxes and shock-absorbing palettes. Failure to do so may cause failures in the 规定的限量要求以下。
appear. displayed. product. After transportation, verify operation of the product and check for damage ×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T
Add a check mark to "Specify search location", and install by specifying the of the mounting part, etc.
folder of USB driver software. Click [ Continue ], when displayed. 26572规定的限量要求。
- Windows 98, Windows 98SE, Windows Millennium Edition, Windows  If using Windows 7  The expansion board cannot be connected to any FX3UC Series PLC other than
2000 A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ Control FX3UC-32MT-LT(-2).
Click [ Next> ] and the window to select the location of the installation files Panel ]  [ System and Security ]  [ Device Manager ] in the menu of the personal 基于中国标准法的参考规格: GB/T15969.2
 Only one expansion board can be used per main unit.
will appear. computer.
Additional expansion boards such as the FX3U-232-BD, FX3U-422-BD or FX3U-485-
Add a check mark to "Specify search location", and install by specifying the  If using Windows 8/8.1 BD cannot be installed/used together with the FX3U-USB-BD.
folder of USB driver software. A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ All
2) The following screen is displayed. (Only in Windows XP)  FX3U-USB-BD and a personal computer are connected and the PLC is turned on,
apps ]  [ Control Panel ]  [ System and Security ]  [ Device Manager ] in the and then operations such as write, read, and monitor are tried for the first time using This manual confers no industrial property rights or any rights of any other kind,
menu of the personal computer. a programming tool, a communication error message may be displayed. nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
 If using Windows 10 In such a case, clear the message and try the operations again. held responsible for any problems involving industrial property rights which may
A screen that is equivalent to the one below is displayed by clicking [ Start ]   If a communication error message appears while operating the programming tool occur as a result of using the contents noted in this manual.
[ Windows System ] [ Control Panel ] [ Hardware and Sound ]  [ Device (when executing 'Write to PLC', 'Read from PLC', or 'Monitor'), disconnect the USB
Manager ] in the menu of the personal computer. cable once (from either the personal computer or the FX3U-USB-BD) and connect it Warranty
again. Then clear the error message and choose Write, Read, or Monitor again. Exclusion of loss in opportunity and secondary loss from warranty liability
 The programming tool may not be operated properly due to a contact failure at Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
connectors or wire breakage. (1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
Make sure to save the program before transferring or changing it. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
(3) Special damages and secondary damages whether foreseeable or not, compensation for
10. Troubleshooting accidents, and compensation for damages to products other than Mitsubishi products.
 If communication cannot be established between the PLC and a personal computer (4) Replacement by the user, maintenance of on-site equipment, start-up test run
using the FX3U-USB-BD, confirm the following status by checking the SD LED and
B) and other tasks.
RD LED in the FX3U-USB-BD.
The status of SD LED and RD RED
For safe use
Click [ Continue Anyway ]. The status of the SD
Contents
LED and RD LED.
3) The completion screen is displayed.  This product has been manufactured as a general-purpose part for general
Click [ Finish ]. Blinking Communicating correctly industries, and has not been designed or manufactured to be incorporated in
If using Windows 2000 or Windows XP, proceed to step 4). A) a device or system used in purposes related to human life.
- If Windows 98, Windows 98SE or Windows Millennium Edition is used, • Confirm that the power is supplied to the personal  Before using the product for special purposes such as nuclear power, electric
computer. power, aerospace, medicine or passenger movement vehicles, consult with
installation of the USB Serial Port software begins, and ends automatically.
• Confirm the personal computer and the PLC are Mitsubishi Electric.
The installation of the USB driver software is completed.
SD connected properly with the specified cable.  This product has been manufactured under strict quality control. However
Next, please confirm whether the installation is performed normally.
OFF • Confirm that the communication settings, such as the
Regarding confirmation, refer to Chapter 7. when installing the product where major accidents or losses could occur if the
COM number, and connected PLC are correctly set in
the software. Refer to the software manual. product fails, install appropriate backup or failsafe functions in the system.
• Please check whether the driver can be installed
normally. Regarding confirmation, refer to Chapter 6.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
 JY997D13501Q Side
B
Side
A JAPANESE
Side
B ENGLISH
1. Outline 2.1 Installation Method 3.5 System Requirements
The FX3U-USB-BD (hereinafter called USB-BD) is an expansion board equipped with 1) Power off the PLC. 0
IN 10
11

Item Specification

2
an USB port (Mini-B plug, female) for USB communication. Disconnect all the cables connected to the PLC.

1
11

0
T 10
OU

Microsoft Windows98*1, Windows98SE*1

FX3U-48M

By connecting the USB-BD and a personal computer with USB ports, program transfer Demount the PLC from the DIN rail. MR
/ES
-48M FX3U-48

to a PLC main unit and monitoring can be performed. 2) Using a flat head screwdriver as shown in the Microsoft WindowsMillennium Edition (Windows Me)*1
3U
FX

FX3U-USB-BD 1.1 Incorporated Items figure on the right, lift the dummy expansion board
cover (fig. A) making sure not to damage the
A
RU
N
Microsoft Windows2000*1
Microsoft WindowsXP*2,*3
P
STO

Verify that the following product and items are included in the package: circuit board or electronic parts.
USER'S MANUAL Product USB communication expansion board FX3U-USB-BD 1 3)
OS Microsoft Windows Vista*2,*3
Microsoft Windows7*4
3) Remove the dummy expansion board cover (fig.
M3 tapping screws 2 A) perpendicularly away from the main unit. Microsoft Windows8*5
Manual Number JY997D13501 Included
items
USB cable (3 m (118.1")) 1 Microsoft Windows8.1*6
Revision Q User's Manual (this manual) 1 Microsoft Windows 10*7
2)
Date March 2020 1.2 External Dimensions and Part Names GX Works2 (SWDNC-GXW2-E)
Software*8 GX Developer (SWD5C-GPPW-E)
[1] Unit: mm (inches) FX-PCS/WIN-E
This manual describes the part names, dimensions, mounting, and specifications [4] 4) Make sure the expansion board (fig. B) is in IN 10

[6] [5] parallel with the main unit (fig. C) and attach it to C
*1 Use the USB driver for Windows 98, Windows 98SE, Windows

0
T

of the product. Before use, read this manual and the manuals of all relevant
OU

[2] FX3U-48M

46.1 (1.81)
products fully to acquire proficiency in handling and operating the product. Make the expansion board connector.
-48M FX3U
-48
MR
/ES Millennium Edition and Windows 2000 included in the USB driver software
5) Fix the expansion board (fig. B) to the main unit Ver. 1.70.
RD

sure to learn all the product information, safety information, and precautions.
3U
FX

Store this manual in a safe place so that it can be taken out and read whenever SD using the provided M3 tapping screws (fig. D). N
*2 Use the USB driver for Windows XP and Windows Vista included in the
necessary. Always forward it to the end user. Tighten to a torque of 0.3 to 0.6 Nm USB driver software Ver. 1.70.
RU
P
STO

Registration: Microsoft, Windows, Windows Vista, and Windows XP are either [3] 5) *3 Only the 32-bit version of this operating system is supported.
registered trademarks or trademarks of Microsoft Corporation in the United States D *4 USB driver Ver. 1.30 or later is applicable to Windows 7 32-bit version.
53.5 (2.11) 19.6
and/or other countries. The company names, system names and product names B USB driver Ver. 1.40 or later is applicable to Windows 7 64-bit version.
(0.77) Special adapter connector 4)
mentioned in this manual are either registered trademarks or trademarks of their cover is removed Use the applicable USB driver for Windows 7 included in the USB driver
MASS (Weight) : Approx. 20 g (0.05 lbs) D
respective companies. In some cases, trademark symbols such as '' or '' are not software Ver. 1.70.
specified in this manual. USB cable (included with the product) [7] 3. Specifications *5 Use the USB driver for Windows 8 included in the USB driver software Ver. 1.70.
Effective March 2020 [9] *6 Use the USB driver for Windows 8.1 included in the USB driver software Ver. 1.70.
[8] 3.1 Applicable PLC
Specifications are subject to change without notice. *7 Use the USB driver for Windows 10 included in the USB driver software Ver. 1.70.
 2005 Mitsubishi Electric Corporation Model name Applicability *8 GX Developer Ver. 8.23Z or later is applicable to the FX3U Series PLC. Its
B

Ver. 8.13P or later is applicable to the FX3UC-32MT-LT Series PLC. Its Ver.
FX3U Series PLC Ver. 2.20 or later (from first production) 8.68W or later is applicable to the FX3UC-32MT-LT-2 Series PLC.
Safety Precautions (Read these precautions before use.) [1] Mounting holes (2-3.2) [6] Special adapter connector cover
FX3UC-32MT-LT(-2) Ver. 1.00 or later (from first production)
For further details concerning alternative inapplicable programming tool
[2] RD LED: Lighting while receiving data. [7] Special adapter connector setting, refer to the following manual.
This manual classifies the safety precautions into two categories: Refer to the FX3U Series User's Manual - Hardware Edition
(LED color: red) [8] USB Connector (To FX3U-USB-BD)  The expansion board cannot be connected to FX3UC Series PLCs other than the
and . Refer to the FX3UC Series User's Manual - Hardware Edition
[3] SD LED: Lighting while sending data. Mini-B plug male FX3UC-32MT-LT(-2).
(LED color: red) [9] USB Connector (To personal  Only one expansion board can be used per main unit. 4. System Configuration
Indicates that incorrect handling may cause hazardous computer) A plug male additional expansion boards such as the FX3U-232-BD, FX3U-422-BD or FX3U-485-
[4] USB Connector (Mini-B plug female) Connected equipment and connected cable
conditions, resulting in death or severe injury. BD cannot be installed/used together with the FX3U-USB-BD.
[5] Main unit connector - PLC Personal
For details on the system configuration, refer to the following manual.
Indicates that incorrect handling may cause hazardous - FX3U-USB-BD computer
2. Installation Refer to the FX Series User's Manual - Data Communication Edition
conditions, resulting in medium or slight personal injury USB driver Install
or physical damage. INSTALLATION 3.2 General Specifications software
PRECAUTIONS The general specifications are equivalent to the PLC main unit. For general
Depending on the circumstances, procedures indicated by may specifications, refer to the following manuals.
 Make sure to cut off all phases of the power supply externally before attempting USB cable for personal computer
also cause severe injury. However, please do not perform any dielectric withstand voltage tests or insulation
installation or wiring work. connection (included with the product)
It is important to follow all precautions for personal safety. resistance tests to this product.
Failure to do so may cause electric shock or damage to the product. USB
Refer to the FX3U Series User's Manual - Hardware Edition
port
Refer to the FX3UC Series User's Manual - Hardware Edition
Associated Manuals INSTALLATION

B
PRECAUTIONS 3.3 Power Supply Specification
For details of the programming communication, refer to the following manual.
Manual name Manual No. Description Item Specification Refer to the FX Series User's Manual - Data Communication Edition
 Use the product within the generic environment specifications described in PLC
FX3U Series JY997D16501 Explains FX3U Series PLC main unit manual (Hardware Edition).  15 mA / 5 V DC (5 V DC power is supplied from the
User’s Manual MODEL CODE: s p e c i f i c at i o n s f o r I / O , w i ri n g , Never use the product in areas with excessive dust, oily smoke, conductive dusts, main unit)
5. Connecting Procedure
- Hardware Edition 09R516 installation, and maintenance. corrosive gas (salt air, Cl 2 , H 2 S, SO 2 or NO 2 ), flammable gas, vibration or Current consumption 1) Power off the PLC.
 30 mA / 5 V DC (5 V DC power is supplied from the USB 2) Connect the USB (Mini-B plug male) connector of the USB cable to the
impacts, or expose it to high temperature, condensation, or rain and wind.
FX3UC Series JY997D28701 Explains FX3UC Series PLC connector of personal computer) FX3U-USB-BD.
If the product is used in such conditions, electric shock, fire, malfunctions,
User’s Manual MODEL CODE: s p e c i f i c at i o n s f o r I / O , w i ri n g , 3) Connect the USB (A plug male) connector of the USB cable to the personal
deterioration or damage may occur. 3.4 Communication Specifications computer.
- Hardware Edition 09R519 installation, and maintenance.
 Use screwdrivers carefully when performing installation work, thus avoiding 4) Turn ON the power supply of the PLC.
FX-USB-AW accident or product damage. Item Specification 5) Turn ON the power supply of the personal computer.
/FX3U-USB-BD Explains procedures for installing  When drilling screw holes or wiring, make sure cutting or wire debris does not Transmission 6. Driver Installation
User's Manual JY997D32601 the USB driver software for the FX- enter the ventilation slits. USB2.0 (For full speed)
USB-AW or FX3U-USB-BD. standard
- USB Driver Failure to do so may cause fire, equipment failures or malfunctions. Please connect the USB cable to the personal computer. Install USB driver
Installation Edition Photocoupler isolation software. For USB driver software, consult with your local Mitsubishi Electric sales
 Do not touch the conductive parts of the product directly. Isolation
(Between communication line and CPU) representative.
FX Series User’s Explains N:N network, Parallel Doing so may cause device failures or malfunctions.
JY997D16901 Caution
Manual - Data Link, Computer Link, Non-Protocol  Connect expansion board securely to their designated connectors. Maximum
MODEL CODE: 5 m (196.9") at most (Included cable is 3 m (118.1").)  Please confirm whether the installation is performed normally after the
Communication communication by RS and RS2 Loose connections may cause malfunctions. transmission distance
09R715 instructions/FX2N-232IF. installation of the driver. Regarding confirmation, refer to Chapter 7.
Edition
Baud Rate 9600/19200/38400/57600/115200 bps  The driver is not installed properly when the process is canceled during
The following section describes the installation method for the FX3U/FX3UC-32MT-LT
How to obtain manuals installation. To complete installation, uninstall the driver, and install again. For
(-2) Series PLC (FX3U Series PLC is used for the following example). Port USB (Mini-B plug female)
For product manuals or documents, consult with your local Mitsubishi Electric the uninstallation procedure of the driver, refer to the following manual.
For more details on installation and removal, refer to the PLC main unit manual. FX-USB-AW/FX3U-USB-BD User's Manual
sales representative. Refer to the FX3U Series User's Manual - Hardware Edition - USB Driver Installation Edition
Refer to the FX3UC Series User's Manual - Hardware Edition
Applicable standards  This product requires USB Driver Installation for each USB port to be used. To
FX3U-USB-BD units made in June, 2005 or later comply with the EC Directive (EMC use multiple USB ports, connect this product to each port, and install the driver
each time.
Directive). Further information can be found in the following manual. However, the The driver is not installed properly if the driver of a different version has already
FX3UC-32MT-LT does not comply with the EC Directive (EMC Directive). been installed. To complete installation, uninstall the driver, and install again.
Refer to the FX3U Series Hardware Manual (Manual No. JY997D50301) (With Windows Vista, Windows 7, Windows 8/8.1 or Windows 10, driver
Refer to the FX3UC-32MT-LT-2 Hardware Manual installation will occur automatically.
(Manual No. JY997D31601) In other OS, depending on the PC environment, driver installation may occur
Attention automatically, or the location for the file may be required to be specified.)
This product is designed for use in industrial applications.

USB driver software (Ver. 1.70) folder structure 4) The following screen is displayed. Check following: The status of the SD
1) "FX-USB-AW/FX3U-USB-BD" is displayed at A), as part of the list of the Contents
<Unzipped folder name> LED and RD LED.
<USB driver software file name> "Universal Serial Bus controllers".
<Win2000_ME_98> 2) "FX-USB-AW/FX3U-USB-BD (COM*)" is displayed at B), as part of the serial port Blinking Data receiving
The USB driver for Windows 98, Windows98SE, list.
• Confirm that the power is supplied to PLC.
Windows Millennium Edition (Me) and Windows 2000 is stored. * indicates the COM number used in FX3U-USB-BD.
• The PLC will not operate when a configuration that
<WinVista_XP> 3) is not displayed. exceeds the 5 V DC or 24 V DC capacity is used.
The USB driver for Windows XP and Windows Vista is stored. It will also be impossible to communicate normally.
Identification result:
<Win7> • Confirm that the specified cable is used to connect
The USB driver for Windows 7 32-bit version is stored.  If 1) through 3) are all confirmed, installation is normal. RD the personal computer and PLC.
Select the programming software COM number as the COM number currently OFF
<Win7_64> • Confirm that the communication settings, such as
assigned on the screen above. the COM number, and connected PLC are
The USB driver for Windows 7 64-bit version is stored.
 If any one of 1) through 3) is not satisfied, installation is not normal. correctly set in the software. Refer to the software
<Win8> (If the USB serial port software is not installed or the installation procedure is
The USB driver for Windows 8 is stored. manual.
canceled in process are possible causes) • Please check whether the driver can be installed
<Win8_1> In this case, please start the installation procedure again from the beginning, after normally. Regarding confirmation, refer to Chapter 6.
The USB driver for Windows 8.1 is stored. uninstalling the driver. For the installation procedure of the driver, refer to Chapter 6.
<Win10_32> For the uninstallation procedure of the driver, refer to the following manual.  When driver installation is required after already establishing USB communication.
The USB driver for Windows 10 32-bit version is stored. FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition  This product requires USB Driver Installation for each USB port to be
<Win10_64> 8. Uninstalling Driver connected. Connect the product to a driver-installed USB port, or install the
The USB driver for Windows 10 64-bit version is stored. driver for the current port.
For the uninstallation procedure of the driver, refer to the following manual.
Follow the same procedure as 1) to install the USB Serial Port software. FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition The driver is not installed properly if the driver of a different version has
6.1 Windows 98, Windows
98SE, Windows
Millennium 5) The screen of 2) is displayed. (Only in Windows XP) already been installed. To complete installation, uninstall the driver, and
9. Caution on use
Edition, Windows 2000, and Windows XP Click [ Continue Anyway ]. install again.
Please install the driver with the following procedure. 6) The completion screen is displayed. STARTUP AND
The installation procedure is explained when connecting to a personal computer Click [ Finish ]. MAINTENANCE
with Windows XP. The installation of the USB Serial Port software will finish. PRECAUTIONS
Next, please confirm whether the installation is performed normally. Regarding 「电器电子产品有害物质限制使用标识要求」的表示方式
 Installation methods for Windows 98, Windows 98SE, Windows
confirmation, refer to Chapter 7.  Before modifying or disrupting the program in operation or running the PLC,
Millennium Edition, and Windows 2000 will vary.
carefully read through this manual and the associated manuals and ensure the
1) When the USB cable is connected to the personal computer, the following 6.2 Windows Vista, Windows 7, Windows 8/8.1, Windows 10 safety of the operation.
screen is displayed. Note: This symbol mark is for China only.
For the installation procedure of the driver, refer to the following manual. An operation error may damage the machinery or cause accidents.
FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition
7. Installation Confirmation of Driver STARTUP AND 含有有害6物质的名称，含有量，含有部品
MAINTENANCE 本产品中所含有的有害6 物质的名称，含有量，含有部品如下表
Procedure for confirming the installation of the driver is described below.
PRECAUTIONS
Please perform the following procedure, where the FX3U-USB-BD is connected to the 所示。
personal computer.  Do not disassemble or modify the PLC.
Windows XP example follows. Doing so may cause fire, equipment failures, or malfunctions. 产品中有害物质的名称及含量
 In Windows XP, click [ Start ]  [ Control Panel ]  [ Performance and Maintenance ] * For repair, contact your local Mitsubishi Electric representative.
 [ System ]  [ Hardware ]  [ Device Manager ] and the window below will be  Do not drop the product or exert strong impact to it. 有害物质
displayed. Doing so may cause damage.
Please confirm the COM number to which the driver is allocated (COM and LPT). 部件名称 多溴
铅 汞 镉 六价铬 多溴联苯
 If using Windows 98, Windows 98SE, Windows Millennium Edition or DISPOSAL 二苯醚
PRECAUTIONS (Pb) (Hg) (Cd) (Cr(VI)) (PBB)
Windows 2000 (PBDE)
A screen that is equivalent to the one below is displayed by clicking [ My Computer ]
 Please contact a certified electronic waste disposal company for the
 [ Control Panel ]  [ System ]  [ Device Manager ] in the menu of the personal
environmentally safe recycling and disposal of your device. 可编程 外壳 ○ ○ ○ ○ ○ ○
computer. 控制器 印刷基板
 If using Windows Vista × ○ ○ ○ ○ ○
TRANSPORTATION AND
A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ Control
STORAGE PRECAUTIONS 本表格依据SJ/T 11364的规定编制。
Panel ]  [ Hardware and Sound ]  [ Device Manager ] in the menu of the personal
computer.  The product is a precision instrument. During transportation, avoid impacts larger
- Windows XP
Add a check mark to [ Install from a list or specific location (Advanced) ] and When user account control is enabled than those specified in the general specifications by using dedicated packaging ○:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572
click [ Next > ]. The window to select the installation path for the files will Only when user account control is enabled will the "user account control" screen be boxes and shock-absorbing palettes. Failure to do so may cause failures in the 规定的限量要求以下。
appear. displayed. product. After transportation, verify operation of the product and check for damage ×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T
Add a check mark to "Specify search location", and install by specifying the of the mounting part, etc.
folder of USB driver software. Click [ Continue ], when displayed. 26572规定的限量要求。
- Windows 98, Windows 98SE, Windows Millennium Edition, Windows  If using Windows 7  The expansion board cannot be connected to any FX3UC Series PLC other than
2000 A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ Control FX3UC-32MT-LT(-2).
Click [ Next> ] and the window to select the location of the installation files Panel ]  [ System and Security ]  [ Device Manager ] in the menu of the personal 基于中国标准法的参考规格: GB/T15969.2
 Only one expansion board can be used per main unit.
will appear. computer.
Additional expansion boards such as the FX3U-232-BD, FX3U-422-BD or FX3U-485-
Add a check mark to "Specify search location", and install by specifying the  If using Windows 8/8.1 BD cannot be installed/used together with the FX3U-USB-BD.
folder of USB driver software. A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ All
2) The following screen is displayed. (Only in Windows XP)  FX3U-USB-BD and a personal computer are connected and the PLC is turned on,
apps ]  [ Control Panel ]  [ System and Security ]  [ Device Manager ] in the and then operations such as write, read, and monitor are tried for the first time using This manual confers no industrial property rights or any rights of any other kind,
menu of the personal computer. a programming tool, a communication error message may be displayed. nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
 If using Windows 10 In such a case, clear the message and try the operations again. held responsible for any problems involving industrial property rights which may
A screen that is equivalent to the one below is displayed by clicking [ Start ]   If a communication error message appears while operating the programming tool occur as a result of using the contents noted in this manual.
[ Windows System ] [ Control Panel ] [ Hardware and Sound ]  [ Device (when executing 'Write to PLC', 'Read from PLC', or 'Monitor'), disconnect the USB
Manager ] in the menu of the personal computer. cable once (from either the personal computer or the FX3U-USB-BD) and connect it Warranty
again. Then clear the error message and choose Write, Read, or Monitor again. Exclusion of loss in opportunity and secondary loss from warranty liability
 The programming tool may not be operated properly due to a contact failure at Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
connectors or wire breakage. (1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
Make sure to save the program before transferring or changing it. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
(3) Special damages and secondary damages whether foreseeable or not, compensation for
10. Troubleshooting accidents, and compensation for damages to products other than Mitsubishi products.
 If communication cannot be established between the PLC and a personal computer (4) Replacement by the user, maintenance of on-site equipment, start-up test run
using the FX3U-USB-BD, confirm the following status by checking the SD LED and
B) and other tasks.
RD LED in the FX3U-USB-BD.
The status of SD LED and RD RED
For safe use
Click [ Continue Anyway ]. The status of the SD
Contents
LED and RD LED.
3) The completion screen is displayed.  This product has been manufactured as a general-purpose part for general
Click [ Finish ]. Blinking Communicating correctly industries, and has not been designed or manufactured to be incorporated in
If using Windows 2000 or Windows XP, proceed to step 4). A) a device or system used in purposes related to human life.
- If Windows 98, Windows 98SE or Windows Millennium Edition is used, • Confirm that the power is supplied to the personal  Before using the product for special purposes such as nuclear power, electric
computer. power, aerospace, medicine or passenger movement vehicles, consult with
installation of the USB Serial Port software begins, and ends automatically.
• Confirm the personal computer and the PLC are Mitsubishi Electric.
The installation of the USB driver software is completed.
SD connected properly with the specified cable.  This product has been manufactured under strict quality control. However
Next, please confirm whether the installation is performed normally.
OFF • Confirm that the communication settings, such as the
Regarding confirmation, refer to Chapter 7. when installing the product where major accidents or losses could occur if the
COM number, and connected PLC are correctly set in
the software. Refer to the software manual. product fails, install appropriate backup or failsafe functions in the system.
• Please check whether the driver can be installed
normally. Regarding confirmation, refer to Chapter 6.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
 JY997D13501Q Side
B
Side
A JAPANESE
Side
B ENGLISH
1. Outline 2.1 Installation Method 3.5 System Requirements
The FX3U-USB-BD (hereinafter called USB-BD) is an expansion board equipped with 1) Power off the PLC. 0
IN 10
11

Item Specification

2
an USB port (Mini-B plug, female) for USB communication. Disconnect all the cables connected to the PLC.

1
11

0
T 10
OU

Microsoft Windows98*1, Windows98SE*1

FX3U-48M

By connecting the USB-BD and a personal computer with USB ports, program transfer Demount the PLC from the DIN rail. MR
/ES
-48M FX3U-48

to a PLC main unit and monitoring can be performed. 2) Using a flat head screwdriver as shown in the Microsoft WindowsMillennium Edition (Windows Me)*1
3U
FX

FX3U-USB-BD 1.1 Incorporated Items figure on the right, lift the dummy expansion board
cover (fig. A) making sure not to damage the
A
RU
N
Microsoft Windows2000*1
Microsoft WindowsXP*2,*3
P
STO

Verify that the following product and items are included in the package: circuit board or electronic parts.
USER'S MANUAL Product USB communication expansion board FX3U-USB-BD 1 3)
OS Microsoft Windows Vista*2,*3
Microsoft Windows7*4
3) Remove the dummy expansion board cover (fig.
M3 tapping screws 2 A) perpendicularly away from the main unit. Microsoft Windows8*5
Manual Number JY997D13501 Included
items
USB cable (3 m (118.1")) 1 Microsoft Windows8.1*6
Revision Q User's Manual (this manual) 1 Microsoft Windows 10*7
2)
Date March 2020 1.2 External Dimensions and Part Names GX Works2 (SWDNC-GXW2-E)
Software*8 GX Developer (SWD5C-GPPW-E)
[1] Unit: mm (inches) FX-PCS/WIN-E
This manual describes the part names, dimensions, mounting, and specifications [4] 4) Make sure the expansion board (fig. B) is in IN 10

[6] [5] parallel with the main unit (fig. C) and attach it to C
*1 Use the USB driver for Windows 98, Windows 98SE, Windows

0
T

of the product. Before use, read this manual and the manuals of all relevant
OU

[2] FX3U-48M

46.1 (1.81)
products fully to acquire proficiency in handling and operating the product. Make the expansion board connector.
-48M FX3U
-48
MR
/ES Millennium Edition and Windows 2000 included in the USB driver software
5) Fix the expansion board (fig. B) to the main unit Ver. 1.70.
RD

sure to learn all the product information, safety information, and precautions.
3U
FX

Store this manual in a safe place so that it can be taken out and read whenever SD using the provided M3 tapping screws (fig. D). N
*2 Use the USB driver for Windows XP and Windows Vista included in the
necessary. Always forward it to the end user. Tighten to a torque of 0.3 to 0.6 Nm USB driver software Ver. 1.70.
RU
P
STO

Registration: Microsoft, Windows, Windows Vista, and Windows XP are either [3] 5) *3 Only the 32-bit version of this operating system is supported.
registered trademarks or trademarks of Microsoft Corporation in the United States D *4 USB driver Ver. 1.30 or later is applicable to Windows 7 32-bit version.
53.5 (2.11) 19.6
and/or other countries. The company names, system names and product names B USB driver Ver. 1.40 or later is applicable to Windows 7 64-bit version.
(0.77) Special adapter connector 4)
mentioned in this manual are either registered trademarks or trademarks of their cover is removed Use the applicable USB driver for Windows 7 included in the USB driver
MASS (Weight) : Approx. 20 g (0.05 lbs) D
respective companies. In some cases, trademark symbols such as '' or '' are not software Ver. 1.70.
specified in this manual. USB cable (included with the product) [7] 3. Specifications *5 Use the USB driver for Windows 8 included in the USB driver software Ver. 1.70.
Effective March 2020 [9] *6 Use the USB driver for Windows 8.1 included in the USB driver software Ver. 1.70.
[8] 3.1 Applicable PLC
Specifications are subject to change without notice. *7 Use the USB driver for Windows 10 included in the USB driver software Ver. 1.70.
 2005 Mitsubishi Electric Corporation Model name Applicability *8 GX Developer Ver. 8.23Z or later is applicable to the FX3U Series PLC. Its
B

Ver. 8.13P or later is applicable to the FX3UC-32MT-LT Series PLC. Its Ver.
FX3U Series PLC Ver. 2.20 or later (from first production) 8.68W or later is applicable to the FX3UC-32MT-LT-2 Series PLC.
Safety Precautions (Read these precautions before use.) [1] Mounting holes (2-3.2) [6] Special adapter connector cover
FX3UC-32MT-LT(-2) Ver. 1.00 or later (from first production)
For further details concerning alternative inapplicable programming tool
[2] RD LED: Lighting while receiving data. [7] Special adapter connector setting, refer to the following manual.
This manual classifies the safety precautions into two categories: Refer to the FX3U Series User's Manual - Hardware Edition
(LED color: red) [8] USB Connector (To FX3U-USB-BD)  The expansion board cannot be connected to FX3UC Series PLCs other than the
and . Refer to the FX3UC Series User's Manual - Hardware Edition
[3] SD LED: Lighting while sending data. Mini-B plug male FX3UC-32MT-LT(-2).
(LED color: red) [9] USB Connector (To personal  Only one expansion board can be used per main unit. 4. System Configuration
Indicates that incorrect handling may cause hazardous computer) A plug male additional expansion boards such as the FX3U-232-BD, FX3U-422-BD or FX3U-485-
[4] USB Connector (Mini-B plug female) Connected equipment and connected cable
conditions, resulting in death or severe injury. BD cannot be installed/used together with the FX3U-USB-BD.
[5] Main unit connector - PLC Personal
For details on the system configuration, refer to the following manual.
Indicates that incorrect handling may cause hazardous - FX3U-USB-BD computer
2. Installation Refer to the FX Series User's Manual - Data Communication Edition
conditions, resulting in medium or slight personal injury USB driver Install
or physical damage. INSTALLATION 3.2 General Specifications software
PRECAUTIONS The general specifications are equivalent to the PLC main unit. For general
Depending on the circumstances, procedures indicated by may specifications, refer to the following manuals.
 Make sure to cut off all phases of the power supply externally before attempting USB cable for personal computer
also cause severe injury. However, please do not perform any dielectric withstand voltage tests or insulation
installation or wiring work. connection (included with the product)
It is important to follow all precautions for personal safety. resistance tests to this product.
Failure to do so may cause electric shock or damage to the product. USB
Refer to the FX3U Series User's Manual - Hardware Edition
port
Refer to the FX3UC Series User's Manual - Hardware Edition
Associated Manuals INSTALLATION

B
PRECAUTIONS 3.3 Power Supply Specification
For details of the programming communication, refer to the following manual.
Manual name Manual No. Description Item Specification Refer to the FX Series User's Manual - Data Communication Edition
 Use the product within the generic environment specifications described in PLC
FX3U Series JY997D16501 Explains FX3U Series PLC main unit manual (Hardware Edition).  15 mA / 5 V DC (5 V DC power is supplied from the
User’s Manual MODEL CODE: s p e c i f i c at i o n s f o r I / O , w i ri n g , Never use the product in areas with excessive dust, oily smoke, conductive dusts, main unit)
5. Connecting Procedure
- Hardware Edition 09R516 installation, and maintenance. corrosive gas (salt air, Cl 2 , H 2 S, SO 2 or NO 2 ), flammable gas, vibration or Current consumption 1) Power off the PLC.
 30 mA / 5 V DC (5 V DC power is supplied from the USB 2) Connect the USB (Mini-B plug male) connector of the USB cable to the
impacts, or expose it to high temperature, condensation, or rain and wind.
FX3UC Series JY997D28701 Explains FX3UC Series PLC connector of personal computer) FX3U-USB-BD.
If the product is used in such conditions, electric shock, fire, malfunctions,
User’s Manual MODEL CODE: s p e c i f i c at i o n s f o r I / O , w i ri n g , 3) Connect the USB (A plug male) connector of the USB cable to the personal
deterioration or damage may occur. 3.4 Communication Specifications computer.
- Hardware Edition 09R519 installation, and maintenance.
 Use screwdrivers carefully when performing installation work, thus avoiding 4) Turn ON the power supply of the PLC.
FX-USB-AW accident or product damage. Item Specification 5) Turn ON the power supply of the personal computer.
/FX3U-USB-BD Explains procedures for installing  When drilling screw holes or wiring, make sure cutting or wire debris does not Transmission 6. Driver Installation
User's Manual JY997D32601 the USB driver software for the FX- enter the ventilation slits. USB2.0 (For full speed)
USB-AW or FX3U-USB-BD. standard
- USB Driver Failure to do so may cause fire, equipment failures or malfunctions. Please connect the USB cable to the personal computer. Install USB driver
Installation Edition Photocoupler isolation software. For USB driver software, consult with your local Mitsubishi Electric sales
 Do not touch the conductive parts of the product directly. Isolation
(Between communication line and CPU) representative.
FX Series User’s Explains N:N network, Parallel Doing so may cause device failures or malfunctions.
JY997D16901 Caution
Manual - Data Link, Computer Link, Non-Protocol  Connect expansion board securely to their designated connectors. Maximum
MODEL CODE: 5 m (196.9") at most (Included cable is 3 m (118.1").)  Please confirm whether the installation is performed normally after the
Communication communication by RS and RS2 Loose connections may cause malfunctions. transmission distance
09R715 instructions/FX2N-232IF. installation of the driver. Regarding confirmation, refer to Chapter 7.
Edition
Baud Rate 9600/19200/38400/57600/115200 bps  The driver is not installed properly when the process is canceled during
The following section describes the installation method for the FX3U/FX3UC-32MT-LT
How to obtain manuals installation. To complete installation, uninstall the driver, and install again. For
(-2) Series PLC (FX3U Series PLC is used for the following example). Port USB (Mini-B plug female)
For product manuals or documents, consult with your local Mitsubishi Electric the uninstallation procedure of the driver, refer to the following manual.
For more details on installation and removal, refer to the PLC main unit manual. FX-USB-AW/FX3U-USB-BD User's Manual
sales representative. Refer to the FX3U Series User's Manual - Hardware Edition - USB Driver Installation Edition
Refer to the FX3UC Series User's Manual - Hardware Edition
Applicable standards  This product requires USB Driver Installation for each USB port to be used. To
FX3U-USB-BD units made in June, 2005 or later comply with the EC Directive (EMC use multiple USB ports, connect this product to each port, and install the driver
each time.
Directive). Further information can be found in the following manual. However, the The driver is not installed properly if the driver of a different version has already
FX3UC-32MT-LT does not comply with the EC Directive (EMC Directive). been installed. To complete installation, uninstall the driver, and install again.
Refer to the FX3U Series Hardware Manual (Manual No. JY997D50301) (With Windows Vista, Windows 7, Windows 8/8.1 or Windows 10, driver
Refer to the FX3UC-32MT-LT-2 Hardware Manual installation will occur automatically.
(Manual No. JY997D31601) In other OS, depending on the PC environment, driver installation may occur
Attention automatically, or the location for the file may be required to be specified.)
This product is designed for use in industrial applications.

USB driver software (Ver. 1.70) folder structure 4) The following screen is displayed. Check following: The status of the SD
1) "FX-USB-AW/FX3U-USB-BD" is displayed at A), as part of the list of the Contents
<Unzipped folder name> LED and RD LED.
<USB driver software file name> "Universal Serial Bus controllers".
<Win2000_ME_98> 2) "FX-USB-AW/FX3U-USB-BD (COM*)" is displayed at B), as part of the serial port Blinking Data receiving
The USB driver for Windows 98, Windows98SE, list.
• Confirm that the power is supplied to PLC.
Windows Millennium Edition (Me) and Windows 2000 is stored. * indicates the COM number used in FX3U-USB-BD.
• The PLC will not operate when a configuration that
<WinVista_XP> 3) is not displayed. exceeds the 5 V DC or 24 V DC capacity is used.
The USB driver for Windows XP and Windows Vista is stored. It will also be impossible to communicate normally.
Identification result:
<Win7> • Confirm that the specified cable is used to connect
The USB driver for Windows 7 32-bit version is stored.  If 1) through 3) are all confirmed, installation is normal. RD the personal computer and PLC.
Select the programming software COM number as the COM number currently OFF
<Win7_64> • Confirm that the communication settings, such as
assigned on the screen above. the COM number, and connected PLC are
The USB driver for Windows 7 64-bit version is stored.
 If any one of 1) through 3) is not satisfied, installation is not normal. correctly set in the software. Refer to the software
<Win8> (If the USB serial port software is not installed or the installation procedure is
The USB driver for Windows 8 is stored. manual.
canceled in process are possible causes) • Please check whether the driver can be installed
<Win8_1> In this case, please start the installation procedure again from the beginning, after normally. Regarding confirmation, refer to Chapter 6.
The USB driver for Windows 8.1 is stored. uninstalling the driver. For the installation procedure of the driver, refer to Chapter 6.
<Win10_32> For the uninstallation procedure of the driver, refer to the following manual.  When driver installation is required after already establishing USB communication.
The USB driver for Windows 10 32-bit version is stored. FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition  This product requires USB Driver Installation for each USB port to be
<Win10_64> 8. Uninstalling Driver connected. Connect the product to a driver-installed USB port, or install the
The USB driver for Windows 10 64-bit version is stored. driver for the current port.
For the uninstallation procedure of the driver, refer to the following manual.
Follow the same procedure as 1) to install the USB Serial Port software. FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition The driver is not installed properly if the driver of a different version has
6.1 Windows 98, Windows
98SE, Windows
Millennium 5) The screen of 2) is displayed. (Only in Windows XP) already been installed. To complete installation, uninstall the driver, and
9. Caution on use
Edition, Windows 2000, and Windows XP Click [ Continue Anyway ]. install again.
Please install the driver with the following procedure. 6) The completion screen is displayed. STARTUP AND
The installation procedure is explained when connecting to a personal computer Click [ Finish ]. MAINTENANCE
with Windows XP. The installation of the USB Serial Port software will finish. PRECAUTIONS
Next, please confirm whether the installation is performed normally. Regarding 「电器电子产品有害物质限制使用标识要求」的表示方式
 Installation methods for Windows 98, Windows 98SE, Windows
confirmation, refer to Chapter 7.  Before modifying or disrupting the program in operation or running the PLC,
Millennium Edition, and Windows 2000 will vary.
carefully read through this manual and the associated manuals and ensure the
1) When the USB cable is connected to the personal computer, the following 6.2 Windows Vista, Windows 7, Windows 8/8.1, Windows 10 safety of the operation.
screen is displayed. Note: This symbol mark is for China only.
For the installation procedure of the driver, refer to the following manual. An operation error may damage the machinery or cause accidents.
FX-USB-AW/FX3U-USB-BD User's Manual - USB Driver Installation Edition
7. Installation Confirmation of Driver STARTUP AND 含有有害6物质的名称，含有量，含有部品
MAINTENANCE 本产品中所含有的有害6 物质的名称，含有量，含有部品如下表
Procedure for confirming the installation of the driver is described below.
PRECAUTIONS
Please perform the following procedure, where the FX3U-USB-BD is connected to the 所示。
personal computer.  Do not disassemble or modify the PLC.
Windows XP example follows. Doing so may cause fire, equipment failures, or malfunctions. 产品中有害物质的名称及含量
 In Windows XP, click [ Start ]  [ Control Panel ]  [ Performance and Maintenance ] * For repair, contact your local Mitsubishi Electric representative.
 [ System ]  [ Hardware ]  [ Device Manager ] and the window below will be  Do not drop the product or exert strong impact to it. 有害物质
displayed. Doing so may cause damage.
Please confirm the COM number to which the driver is allocated (COM and LPT). 部件名称 多溴
铅 汞 镉 六价铬 多溴联苯
 If using Windows 98, Windows 98SE, Windows Millennium Edition or DISPOSAL 二苯醚
PRECAUTIONS (Pb) (Hg) (Cd) (Cr(VI)) (PBB)
Windows 2000 (PBDE)
A screen that is equivalent to the one below is displayed by clicking [ My Computer ]
 Please contact a certified electronic waste disposal company for the
 [ Control Panel ]  [ System ]  [ Device Manager ] in the menu of the personal
environmentally safe recycling and disposal of your device. 可编程 外壳 ○ ○ ○ ○ ○ ○
computer. 控制器 印刷基板
 If using Windows Vista × ○ ○ ○ ○ ○
TRANSPORTATION AND
A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ Control
STORAGE PRECAUTIONS 本表格依据SJ/T 11364的规定编制。
Panel ]  [ Hardware and Sound ]  [ Device Manager ] in the menu of the personal
computer.  The product is a precision instrument. During transportation, avoid impacts larger
- Windows XP
Add a check mark to [ Install from a list or specific location (Advanced) ] and When user account control is enabled than those specified in the general specifications by using dedicated packaging ○:表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572
click [ Next > ]. The window to select the installation path for the files will Only when user account control is enabled will the "user account control" screen be boxes and shock-absorbing palettes. Failure to do so may cause failures in the 规定的限量要求以下。
appear. displayed. product. After transportation, verify operation of the product and check for damage ×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T
Add a check mark to "Specify search location", and install by specifying the of the mounting part, etc.
folder of USB driver software. Click [ Continue ], when displayed. 26572规定的限量要求。
- Windows 98, Windows 98SE, Windows Millennium Edition, Windows  If using Windows 7  The expansion board cannot be connected to any FX3UC Series PLC other than
2000 A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ Control FX3UC-32MT-LT(-2).
Click [ Next> ] and the window to select the location of the installation files Panel ]  [ System and Security ]  [ Device Manager ] in the menu of the personal 基于中国标准法的参考规格: GB/T15969.2
 Only one expansion board can be used per main unit.
will appear. computer.
Additional expansion boards such as the FX3U-232-BD, FX3U-422-BD or FX3U-485-
Add a check mark to "Specify search location", and install by specifying the  If using Windows 8/8.1 BD cannot be installed/used together with the FX3U-USB-BD.
folder of USB driver software. A screen that is equivalent to the one below is displayed by clicking [ Start ]  [ All
2) The following screen is displayed. (Only in Windows XP)  FX3U-USB-BD and a personal computer are connected and the PLC is turned on,
apps ]  [ Control Panel ]  [ System and Security ]  [ Device Manager ] in the and then operations such as write, read, and monitor are tried for the first time using This manual confers no industrial property rights or any rights of any other kind,
menu of the personal computer. a programming tool, a communication error message may be displayed. nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
 If using Windows 10 In such a case, clear the message and try the operations again. held responsible for any problems involving industrial property rights which may
A screen that is equivalent to the one below is displayed by clicking [ Start ]   If a communication error message appears while operating the programming tool occur as a result of using the contents noted in this manual.
[ Windows System ] [ Control Panel ] [ Hardware and Sound ]  [ Device (when executing 'Write to PLC', 'Read from PLC', or 'Monitor'), disconnect the USB
Manager ] in the menu of the personal computer. cable once (from either the personal computer or the FX3U-USB-BD) and connect it Warranty
again. Then clear the error message and choose Write, Read, or Monitor again. Exclusion of loss in opportunity and secondary loss from warranty liability
 The programming tool may not be operated properly due to a contact failure at Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
connectors or wire breakage. (1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
Make sure to save the program before transferring or changing it. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
(3) Special damages and secondary damages whether foreseeable or not, compensation for
10. Troubleshooting accidents, and compensation for damages to products other than Mitsubishi products.
 If communication cannot be established between the PLC and a personal computer (4) Replacement by the user, maintenance of on-site equipment, start-up test run
using the FX3U-USB-BD, confirm the following status by checking the SD LED and
B) and other tasks.
RD LED in the FX3U-USB-BD.
The status of SD LED and RD RED
For safe use
Click [ Continue Anyway ]. The status of the SD
Contents
LED and RD LED.
3) The completion screen is displayed.  This product has been manufactured as a general-purpose part for general
Click [ Finish ]. Blinking Communicating correctly industries, and has not been designed or manufactured to be incorporated in
If using Windows 2000 or Windows XP, proceed to step 4). A) a device or system used in purposes related to human life.
- If Windows 98, Windows 98SE or Windows Millennium Edition is used, • Confirm that the power is supplied to the personal  Before using the product for special purposes such as nuclear power, electric
computer. power, aerospace, medicine or passenger movement vehicles, consult with
installation of the USB Serial Port software begins, and ends automatically.
• Confirm the personal computer and the PLC are Mitsubishi Electric.
The installation of the USB driver software is completed.
SD connected properly with the specified cable.  This product has been manufactured under strict quality control. However
Next, please confirm whether the installation is performed normally.
OFF • Confirm that the communication settings, such as the
Regarding confirmation, refer to Chapter 7. when installing the product where major accidents or losses could occur if the
COM number, and connected PLC are correctly set in
the software. Refer to the software manual. product fails, install appropriate backup or failsafe functions in the system.
• Please check whether the driver can be installed
normally. Regarding confirmation, refer to Chapter 6.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN