COMMERCIAL PUMP PART INDEX

Pump
Repair
Parts
Identifying Pumps & Motors . . . . . . . . . . .474
Pump/Motor Seal Kits . . . . . . . . . . . . .475 - 476
Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . .477
Parts Breakdown
• C101/102 Parts Breakdown . . . . . . . . . . . . . .478
• G101/102 Parts Breakdown . . . . . . . . . . . . . .479
• P20 Parts Breakdown . . . . . . . . . . . . . . . . . .480
• P25X Parts Breakdown . . . . . . . . . . . . . . . . .481
• P30 Parts Breakdown . . . . . . . . . . . . . . . . . .482
• P31 Parts Breakdown . . . . . . . . . . . . . . . . . .483
• 37X Parts Breakdown . . . . . . . . . . . . . . . . . .484
• P50 Parts Breakdown . . . . . . . . . . . . . . . . . .485
• P51 Parts Breakdown . . . . . . . . . . . . . . . . . .486
• P75 Parts Breakdown . . . . . . . . . . . . . . . . . .487
• P76 Parts Breakdown . . . . . . . . . . . . . . . . . .488
• P330 Parts Breakdown . . . . . . . . . . . . . . . . .489
• P350 Parts Breakdown . . . . . . . . . . . . . . . . .490
• P365 Parts Breakdown . . . . . . . . . . . . . . . . .491
COMMERCIAL - ID PUMPS & MOTORS ®

IDENTIFYING PUMPS & MOTORS

By the Shape and Size of the Port End Cover

1. Look at the Unit from the Port End, see which example it matches the closest. Include the Shape, Size, and most importantly the Bolt Pattern.
2. Measure the overall width of the Unit, then match the width to the chart beside the Port End you chose in step #1.
3. If there is not a “See Also” block on the chart you used, then you’ve identified the Unit. Otherwise move to step #4.
4. A Numbered Note marker will direct you to the next step or steps.

PORT END VIEW

Series “D”
Width 4.50 1 SHAFT END VIEW
Look at the Unit from the Shaft End, compare it to
the views below. Select the Shaft type on your Unit.
WIDTH SERIES 31/51 25X/37X
Series 315 330 350 365
Side Ported
Width 4.25 6.68 7.12 7.38
Unported NO RETAINER/ W/SNAP RING SCREW IN
Width 4.00 4.81 5.75 6.25 OUTBOARD BEARINGS (SEE NOTE BELOW) RETAINER
WIDTH

Series 37X 75 / 76 125

2 DISASSEMBLE UNIT
Width 5.12 6.13 7.00 This step requires the Port End Cover of the
See Also 2 Unit to be removed & inspected for Dowel Pins.
This is the only way to tell the difference between
WIDTH
some Series.
Series 15H 25X 20 30/31 50/51 Series 31/51/76: Assembled with Dowel Pins.
Width 4.38 4.94 4.50 4.81 4.94
See Also 1 2 1 2 Call Our Component Sales Team
WIDTH If You Need More Assistance.

Identifying Commercial Gear Width

Compared to Pump or Motor Housing Width
1. Measure the gear housing width (See Illustration).
2. Then match the housing width to the series of pump/motor you are using.
3. Check the chart for the nearest measurement (rounding up) to give you the proper gear width.
Housing Width

P20 Series P75/P76

Gear Width 0.50” 0.75” 1.00” 1.25” 1.50” 1.75” 2.00” Gear Width 0.75” 1.00” 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” 2.75” 3.00”
Housing Width 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” 2.75” Housing Width 1.75” 2.00” 2.25” 2.50” 2.75” 3.00” 3.25” 3.50” 3.75” 4.00”
P25X Series P330 Series
Gear Width 0.50” 0.75” 1.00” 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” Gear Width 0.50” 0.75” 1.25” 1.50” 1.75” 2.00”
Housing Width 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” 2.75” 3.00” 3.25” Housing Width 1.00” 1.25” 1.75” 2.00” 2.25” 2.50”
P30/P31 Series P350 Series
Gear Width 0.50” 0.75” 1.00” 1.25” 1.50” 1.75” 2.00” Gear Width 0.50” 0.75” 1.25” 1.50” 1.75” 2.00” 2.25” 2.50”
Housing Width 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” 2.75” Housing Width 1.00” 1.25” 1.75” 2.00” 2.25” 2.50” 2.75” 3.00”
P37X P365 Series
Gear Width 0.25” 0.50” 0.75” 1.00” 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” 3.00” Gear Width 0.75” 1.25” 1.50” 1.75” 2.00” 2.25” 2.50”
Housing Width 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” 2.75” 3.00” 3.25” 3.50” 4.00” Housing Width 1.25” 1.75” 2.00” 2.25” 2.50” 2.75” 3.00”
P50/P51 Series ®
Gear Width 0.50” 0.75” 1.00” 1.25” 1.50” 1.75” 2.00” 2.25” 2.50”
Housing Width 1.25” 1.50” 1.75” 2.00” 2.25” 2.50” 2.75” 3.00” 3.25”

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

474 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - PUMP/MOTOR SEAL KITS
®

Pump/Motor Seal Kits

Identify kits by using model and shaft end cover numbers. Example:

P25X 342BEOL25-25
Pump Model # Sec #: 342

First # Last #

P20 Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P20SPSK All Pumps
Motors
CM-M205SPSK All Motors
Multiple Section Pump/Motors
CM-MP20MSSK Note: Use 1 kit per section over single kit.

25X Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P25SBSKTI Type I, Single Bearing 1, 2, 3 00, 01, 02, 03, 06, 40, 41, 42, 78, 79, 97, 98
CM-P25SBSKT2 Type II, Single Bearing 1, 2, 3 04, 05, 07
CM-P25DBSK Type II, Double Bearing 6, 8 00, 42, 78, 97, 98
Motors
CM-M25SBSKT1 Type I, Single Bearing 7, 9 00, 01, 02, 03, 06, 40, 41, 42, 78, 79, 95, 97, 98
CM-M25SBSKT2 Type II, Single Bearing 7, 9 04, 05, 07
CM-M25DBSK Type II, Double Bearing 8 00, 42, 47, 78, 97, 98
Multiple Section Pumps & Motors
CM-MP25MSSK Note: Use 1 Kit per section over single kit.

30 Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P30SPSK 1-6 05 - 97
Motors
CM-M30SPSK 8-9 05 - 94
Multiple Section Pumps & Motors
CM-MP30MSSK Note: Use 1 Kit per section over single kit.

37X Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P37SBSK Type I, Single Bearing 1, 2, 3 11, 12, 23, 42, 63, 77, 78, 81, 97
CM-P37DBSK Type II, Double Bearing 6 11, 42, 78
Motors
CM-M37SBSK Type I, Single Bearing 7, 9 11, 12, 23, 42, 63, 78, 81, 97, 98
CM-M37DBSK Type II, Double Bearing 8 11, 42, 78
Multiple Section Pumps & Motors
CM-MP37MSSK Note: Use 1 Kit per section over single kit.

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 475
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - PUMP/MOTOR SEAL KITS ®

Pump/Motor Seal Kits

Identify kits by using model and shaft end cover numbers. Example:

P25X 342BEOL25-25
Pump Model # Sec #: 342

First # Last #

50 Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P50SPSK 1-6 00 - 98
Motors
CM-M50SPSK 8, 9 00 - 98
Multiple Section Pumps & Motors
CM-MP50MSSK Note: Use 1 kit per section over single kit.

75 Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P75SPSK 1-6 42 - 98
Motors
CM-M75SPSK 8, 9 42 - 98
Multiple Section Pumps & Motors
CM-MP75MSSK Note: Use 1 kit per section over single kit.

330 Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P330SPSK All Pumps
Motors
CM-M330SPSK All Motors
Multiple Section Pumps
CM-P330MSSK Note: Use 1 kit per section over single kit.

350 Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P350SPSK All Pumps
Motors
CM-M350SPSK All Motors
Multiple Section Pumps
CM-P350MSSK Note: Use 1 kit per section over single kit.

365 Series
Part Number Application SEC First # SEC Last #
Pumps
CM-P365SPSK All Pumps
Motors
CM-M365SPSK All Motors
Multiple Section Pumps
CM-P365MSSK Note: Use 1 kit per section over single kit.

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

476 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - REPAIR PARTS
®

Repair Parts

Standard Series Pump Parts

25X Series P50/51 Series
Description Engineering # Part Number Description Engineering # Part Number
Retainer Ring W1072 CM-391 2581 009 Snap Ring X134-283 CM-391 2686 065
Seal Retainer SA1669 CM-391 2584 016 Outboard Bearing X69-58 CM-391 0381 077
Seal X73-37-13 CM-391 2883 055 Seal (pump) X73-37-17 CM-391 2883 103
O Ring L3006-26 CM-391 2881 120 Check Assemblies M1391K CM-391 3681 001
Roller Bearing X126-8 CM-391 0384 008 Plug T1391 CM-391 2286 004
Check Assemblies M1391K CM-391 3681 001 Spacer VB1669-1 CM-391 3383 018
Shaft Bushing AH2010 CM-391 0481 002 Seal Retainer AC1669 CM-391 3383 020
Conical Spring A1327-182 CM-391 3581 176 Hi Pressure Seal X73-50-8 CM-391 2883 115
Bearing S1032 CM-391 0381 905 Ring Seals NB1669-1 CM-391 2585 009
O Ring UB3006-244 CM-391 2884 021 Roller Bearings S1032 CM-391 0381 905
Thrust Plate Y1058 CM-391 2185 912 Thrust Plates Y1058 CM-391 2185 912

37X Series P75/76 Series

Description Engineering # Part Number Description Engineering # Part Number
Retainer Ring V1072 CM-391 2581 008 Snap Ring X96-315 CM-391 2686 025
Seal Retainer RA1669 CM-391 2548 015 Outboard Bearing X69-59 CM-391 0381 078
Double Lip Seal X73-37-10 CM-391 2883 052 Spacer VB1669 CM-391 3383 018
O Ring L3006-33 CM-391 2881 127 Seal Retainer RA1072 CM-391 2584 051
Tapered Bearing X126-6 CM-391 0384 006 O Ring L3006-164 CM-391 2881 457
Bushing AG2010 CM-391 0481 001 Seal (pump) X73-37-10 CM-391 2883 052
Spring A1327-177 CM-391 3581 172 (motor) X73-50-1 CM-391 2883 094
Check Assemblies M1391K CM-391 3681 001 Check Assemblies M1391K CM-391 3681 001
Roller Bearings R1032 CM-391 0381 904 Plug T1391 CM-391 2286 004
Thrust Plate X1058 CM-391 2185 909 Ring Seals WB1669-1 CM-391 2585 011
Gasket Seal UB3006-249 CM-391 2884 023 Roller Bearings R1032 CM-391 0381 904
Roll Pins X115-20 CM-391 2084 020 Pocket Seals BA3026-6 CM-391 2882 084
Shaft Bushing AW2010 CM-391 0481 004 Thrust Plates BA1058 CM-391 2185 920
Seal Retainer MA1072 CM-391 2581 004
Hi-Pressure Seal X73-50-1 CM-391 2883 094

P20/30/31 Series
Description Engineering # Part Number
Snap Ring X134-206 CM-391 2686 063
Outboard Bearing X69-40 CM-391 0381 040
Seal (pump) X73-37-16 CM-391 2883 058
Check Assemblies M1391K CM-391 3681 001
Plug T1391 CM-391 2286 004
Spacer VB1669-2 CM-391 3383 069
Seal Retainer AE1669 CM-391 3381 040
Hi Pressure Seal X73-50-9 CM-391 2883 119
Ring Seals LB1669-1 CM-391 2585 006
Roller Bearings Y1032 CM-391 0381 906
Thrust Plates AA1058 CM-391 2185 913

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 477
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - C101/C102 BREAKDOWN ®

Parts Breakdown

C101/C102 Parts Breakdown Seal Kit for C101 - CM-HC101

Seal Kit for C102 - CM-HC102

Typical Parts
Item Description Part No. Req. Item Description Part No. Req. Item Description Part No. Req.
A Shaft End Cover 313-5033-435 1 F Ring Seal 391-2585-009 2 J Pocket Seal 391-2882-050 12
B Snap Ring 391-2686-065 1 G Roller Bearing 391-0381-905 4 K Stud 391-1425-110 4
C Seal Retainer 391-3383-087 1 H Thrust Plate 391-2185-912 2 L Hex Nut 391-1451-076 6
D Lip Seal 391-2883-115 1 I Gear Set 2” 313-2920-230 1 M Port End Cover 1
E Check Assembly 393-3681-001 2 2 1/2” 313-2925-230 1 N Valve Spool 1

C102 Shaft End Parts List replaces items

1 thru 11, 16 and 28 shown below.

C101 Parts List

Item Description Part No. Req. Item Description Part No. Req. Item Description Part No. Req.
1 Hex Nut 391-1451-076 4 15 Gear 2” 314-8020-100 1 27 Washer 391-3784-029 4
2 Washer 391-3784-028 8 Housing 2 1/2” 314-8025-100 1 28 Cap Screw 2” 391-1401-111 4
3 Bracket (optional) 314-0100-005 1 16* Port End Cover 1 2 1/2” 391-1401-110 4
5 Snap Ring 391-2681-493 2 17* Valve Spool 1 29 Cap Screw 391-1401-082 4
6 Lip Seal 391-2883-096 2 18 “O” Ring 391-2881-103 2 30 Sleeve (optional) 391-3283-052 1
7 Shaft End Cover 314-5039-201 1 19A Wiper Ring 391-2883-147 1 31 Pipe Plug - 1” NPT 391-2282-006 1
8 Ring Seal 391-2585-009 4 19 Retainer Ring 391-3782-126 1 32 Spool End Cap 391-1881-073 1
9 Roller Bearing 391-0381-905 4 20 Snap Ring 391-2688-003 1 33 Spiral Pin 391-2085-009 1
10 Thrust Plate 391-2185-916 2 21 Detent Cap 314-0100-003 1 34 Bracket 391-0981-010 1
11 Pocket Seals 391-2882-050 12 22 Detent Ball 391-0282-009 1 35 Socket Hd. 391-1402-063 2
12 Gear Set 2” 314-2920-640 1 23 Detent Spring 391-3581-383 1 Cap Screw
2 1/2” 314-2925-640 1 24 Lock Washer 391-3788-002 1 36 Handle Ass’y 355-9100-009 1
13 Shaft Key 391-1781-021 1 25 Detent Retainer 391-2583-079 1 (optional)
14 Gasket Seal 391-2884-021 2 26 Relief Valve 355-9001-067 1 * Items 16, 17 M and N are not serviceable parts.

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

478 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - G101/G102 BREAKDOWN
®

Parts Breakdown

Seal Kit for G101 - CM-HG101

Seal Kit for G102 - CM-HG102 G101/G102 Parts Breakdown
Typical Parts List

Item Description Part No. Req.

A Shaft End Cover 308-5030-201 1
B Lip Seal 391-2883-119 1
C Seal Retainer 391-3381-040 1
D Spacer 391-3383-069 1
E Snap Ring 3912686-063 1
F Checks 391-3681-001 2
G Ring Seal 391-2585-006 2
H Roller Bearing 391-0381-906 4
I Thrust Plate 391-2185-913 2
J Pocket Seal 391-2882-086 12
K Gear Set 3/4” 312-2907-130 1
1 1/2” 312-2915-230 1
2” 312-2920-230 1

G102 Shaft End Parts List replaces

items 1 thru 8 in G101 Parts List
below.
G101 Parts List
Item Description Part No. Req. Item Description Part No. Req. Item Description Part No. Req.
1 Snap Ring 391-2681-487 2 12 Port End Cover 1 26 Cap Screw 391-1433-020 2
2 Lip Seal 391-2883-119 2 13 Spool 1 27 Detent Ball 391-0282-009 1
3 Shaft End Cover 308-5016-201 1 14 Quad Ring Seal 391-1985-014 2 28 Spring 391-3581-383 1
4 Ring Seal 391-2585-006 4 15 Spool End Cap 391-1881-072 1 29 Lock Washer 391-3788-002 1
5 Roller Bearing 391-0381-906 4 16 Spiral Pin 391-2085-009 1 30 Detent Retainer 391-2583-079 1
6 Pocket Seal 391-2882-086 12 17 Bracket 391-0981-007 1 31 Relief Valve 355-9001-197 1
7 Thrust Plate 391-2185-913 2 18 Skt Hd Cap Screw 391-1402-063 2 32 Cap Screw 3/4” 391-1401-395 4
8 Gear Set 3/4” 312-2907-842 1 19 Cover Plate 391-2183-124 1 1 1/2” 391-1401-381 4
1 1/2” 312-2915-842 1 20 Retaining Ring 391-2681-485 1 2” 391-1401-382 4
2” 312-2920-842 1 21 Spring Guide 391-1642-136 1 33 Washer 391-3782-146 4
9 Key 391-1781-021 1 22 Spring 391-3581-212 1 34 Sleeve (optional) 391-3283-052 1
10 Gasket Seal 391-2884-019 2 23 Spring Guide 39101642-137 1 35 Pipe Plug 391-2282-003 1
11 Gear 3/4” 308-8007-901 1 24 Retaining Ring 391-2681-486 1
Housing 1 1/2” 308-8015-901 1 25A End Cap 308-4000-100 1
2” 308-8020-901 1 25 End Cap 308-4000-102 1

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 479
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - P20 BREAKDOWN ®

Parts Breakdown

P20 Parts Breakdown

Typical Parts List
Note:
This page shows the typical arrangement of a 2-section
unit. It may not be pictorially correct and is not to scale.

Plug 5 in position B gives

clockwise rotation.

Plug 5 in position A gives

counter-clockwise rotation.

Check valves in both positions

give bi-directional rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring CM-391-2686-063 11 Gasket Seals 580-239
2 Outboard Bearing CM-391-0381-040 12 Gear Housing See Option List
3 Seal CM-391-2883-058 13 Bearing Carrier See Option List
4 Shaft End Cover See Option List 14 Connecting Shaft See Option List
5 Check Assemblies or Plug CM-391-3681-001 15 Matched Gear Set See Option List
6 Ring Seals CM-391-2585-006 16 Gear Housing See Option List
7 Roller Bearings CM-391-0381-906 17 Port End Cover See Option List
8 Pocket Seals 18 Washers
9 Thrust Plates CM-391-2185-913 19 Studs or Cap Screws
10 Integral Drive Shaft See Option List 20 Nuts
and Gear Set

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

480 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - 25X BREAKDOWN
®

Parts Breakdown

25X Parts Breakdown

Note:
Typical Parts List
Commercial Model 25X tandem pumps and motors can be
furnished with either the Type I or Type II shaft. The Type
II shaft is used with a thrust bearing and a needle bearing
in place of the tapered roller bearing used in the Type I, in
order to provide for the 6 bolt — 25/8” dia. pilot shaft end
cover. Subassemblies are not interchangeable.

Due to a change in seals, items 31 and 35 are no longer

applicable and have been deleted on this exploded view.

Item Description Part Number Item Description Part Number Item Description Part Number
1 Retainer Ring CM-391-2581-009 25 Thrust Washer 50 Roll Pin
2 Seal Retainer CM-391-2584-016 26 Shaft End Cover 51 Shaft Bushing
3 Double Lip Seal CM-391-2883-055 27 Needle Bearing 52 Bearing Carrier
4 “O” Ring CM-391-2881-120 28 Bearing & Seal Retainer 53 Connection Shaft
5 Bearing Cup 29 “O” Ring 54 Spacer
6 Tapered Bearing CM-391-0384-008 30 Back-up Ring 55 Roll pin
7 Key 32 Drive Shaft 56 Shaft Bushings
8 Drive Shaft 33 Snap Ring Retainer 57 Roller Bearings
9 Shaft End Cover 34 Snap Ring 58 Pocket Seal
10 Check Assemblies CM-391-3681-001 36 Bronze Shaft Bushing CM-391-0481-002 59 Thrust Plate CM-391-2185-912
11 Motor Shaft Seal 37 Conical Spring CM-391-3581-176 60 Connecting Stud
12 Seal Retainer 38 Roller Bearings 61 Lock Nut
13 “O” Ring 39 Pocket Seal 62 “O” Ring Gasket CM-391-2884-021
14 Drive Shaft 40 Thrust Plate CM-391-2185-912 63 Gear Housing
15 Spacer 41 “O” Ring Gasket CM-391-2884-021 64 “O” Ring Gasket CM-391-2884-021
16 Snap Ring 42 Gear Housing 65 Drive Gear
17 Spirolox Snap Ring 43 “O”Ring Gasket CM-391-2884-021 66 Driven Gear
18 Double Lip Seal 44 Drive Gear 67 Thrust plate CM-391-2185-912
19 Bearing and Seal Retainer 45 Driven Gear 68 Pocket Seal
20 Needle Bearing 46 Thrust Plate CM-391-2185-912 69 Roller Bearings
21 “O” Ring 47 Pocket Seal 70 Port End Cover
22 Thrust Bearing Race 48 Roller Bearings CM-391-0381-905 71 Washer
23 Thrust Bearing Rollers 49 Spacer 72 Stud
24 Drive Shaft 73 Hex Nut

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 481
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - P30 BREAKDOWN ®

Parts Breakdown

P30 Parts Breakdown

Typical Parts List
Note:
This page shows the typical arrangement of a 2-section unit.
It may not be pictorially correct and is not to scale.

Plug 5 in position B gives

clockwise rotation.

Plug 5 in position A gives

counter-clockwise rotation.

Check valves in both positions

give bi-directional rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring CM-391-2686-063 10 Integral Drive Shaft See Option List
2 Outboard Bearing CM-391-0381-040 and Gear Set
3 Seal (Pump) CM-391-2883-058 11 Gasket Seals CM-391-2884-050
Hi Pressure Seal (Motor) CM-391-2883-119 12 Gear Housing See Option List
4 Shaft End Cover See Option List 13 Bearing Carrier See Option List
5 Check Assemblies CM-391-3681-001 14 Connecting Shaft See Option List
Plug CM-391-2286-004 15 Matched Gear Set See Option List
6 Ring Seals CM-391-2585-006 16 Gear Housing See Option List
7 Roller Bearings CM-391-0381-906 17 Port End Cover See Option List
8 Pocket Seals 18 Washers
9 Thrust Plates CM-391-2185-913 19 Studs or Cap Screws
20 Nuts

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

482 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - P31 BREAKDOWN
®

Parts Breakdown

P31 Parts Breakdown

Typical Parts List
Note:
This page shows the typical arrangement of a 2-section unit.
It may not be pictorially correct and is not to scale.

Plug 5 in position B gives

clockwise rotation.

Plug 5 in position A gives

counter-clockwise rotation.

Check valves in both positions

give bi-directional rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring CM-391-2686-063 11 Gasket Seals CM-391-2884-050
2 Outboard Bearing CM-391-0381-040 12 Gear Housing See Option List
3 Seal (Pump) CM-391-2883-058 12A Dowel Pins CM-391-2082-032
Hi Pressure Seal (Motor) CM-391-2883-119 13 Bearing Carrier See Option List
4 Shaft End Cover See Option List 14 Connecting Shaft See Option List
5 Check Assemblies CM-391-3681-001 15 Matched Gear Set See Option List
Plug CM-391-2286-004 16 Gear Housing See Option List
6 Ring Seals CM-391-2585-006 16A Dowel Pins CM-391-2082-032
7 Roller Bearings CM-391-0381-906 17 Port End Cover See Option List
8 Pocket Seals 18 Washers
9 Thrust Plates CM-391-2185-913 19 Studs or Cap Screws
10 Integral Drive Shaft See Option List 20 Nuts
and Gear Set

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 483
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - 37X BREAKDOWN ®

Parts Breakdown

37X Parts Breakdown

Typical Parts List

Item Description Part Number Item Description Part Number

1 Retainer Ring CM-391-2581-008 25 Connector Shaft
2 Seal Retainer CM-391-2548-015 26 Bearing Carrier
3 Double Lip Seal (Shaft Seal-Pumps) CM-391-2883-052 27 Roll pin
4 “O” Ring CM-391-2881-127 28 Shaft Bushing CM-391-0481-004
5 Tapered Roller Bearing CM-391-0384-006 29 Bearings
6 Drive Shaft 30 Thrust Plate
7 Shaft End Cover 31 Pocket Seal
8 Shaft Bushing (Bronze) CM-391-0481-001 32 Spacer
9 Conical Spring CM-391-3581-172 33 Matched Gears
10 Set Screw 34 Gasket Seal
11 Check Assemblies CM-391-3681-001 35 Gear Housing
12 Bearings 36 Gasket Seal CM-391-2884-023
13 Thrust Plate 37 Connecting Stud
14 Pocket Seals 38 Hex Head Nut
15 Spacer 39 Studs
16 Matched Gears 40 Thrust Plate
17 Gasket Seal 41 Pocket Seals
18 Gear Housing 42 Bearings
19 Gasket Seal 43 Port End Cover
20 Thrust Plate CM-391-2185-909 44 Washer
21 Pocket Seals 45 Hex Head Nut
22 Bearing CM-391-0381-904 46 Seal Retainer CM-391-2581-004
23 Roll Pin 47 Hi Pressure Seal (shaft seal-motors) CM-391-2883-094
24 Shaft Bushing

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

484 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - P50 BREAKDOWN
®

Parts Breakdown

P50 Parts Breakdown

Typical Parts List
Note:
This page shows the typical arrangement of a 2-section
unit. It may not be pictorially correct and is not to scale.

Plug 5 in position B gives

clockwise rotation.

Plug 5 in position A gives

counter-clockwise rotation.

Check valves in both positions

give bi-directional rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring CM-391-2686-065 10 Integral Drive Shaft See Option List
2 Outboard Bearing CM-391-0381-077 and Gear Set
3 Seal (Pump) CM-391-2883-103 11 Gasket Seals CM-391-2884-021
Hi Pressure Seal (Motor) CM-391-2883-115 12 Gear Housing See Option List
4 Shaft End Cover See Option List 13 Bearing Carrier See Option List
5 Check Assemblies CM-391-3681-001 14 Connecting Shaft See Option List
Plug CM-391-2286-004 15 Matched Gear Set See Option List
6 Ring Seals CM-391-2585-009 16 Gear Housing See Option List
7 Roller Bearings CM-391-0381-905 17 Port End Cover See Option List
8 Pocket Seals 18 Washers
9 Thrust Plates CM-391-2185-912 19 Studs or Cap Screws
20 Nuts

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 485
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - P51 BREAKDOWN ®

Parts Breakdown

P51 Parts Breakdown

Typical Parts List
Note:
This page shows the typical arrangement of a 2-section unit.
It may not be pictorially correct and is not to scale.

Plug 5 in position B gives

clockwise rotation.

Plug 5 in position A gives

counter-clockwise rotation.

Check valves in both positions

give bi-directional rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring CM-391-2686-065 11 Gasket Seals CM-391-2884-021
2 Outboard Bearing CM-391-0381-077 12 Gear Housing See Option List
3 Seal CM-391-2883-103 12A Dowel Pins CM-391-2082-032
Hi Pressure Seal (Motor) CM-391-2883-115 13 Bearing Carrier See Option List
4 Shaft End Cover See Option List 14 Connecting Shaft See Option List
5 Check Assemblies CM-391-3681-001 15 Matched Gear Set See Option List
Plug CM-391-2286-004 16 Gear Housing See Option List
6 Ring Seals CM-391-2585-009 16A Dowel Pins CM-391-2082-032
7 Roller Bearings CM-391-0381-905 17 Port End Cover See Option List
8 Pocket Seals 18 Washers
9 Thrust Plates CM-391-2185-912 19 Studs or Cap Screws
10 Integral Drive Shaft See Option List 20 Nuts
and Gear Set

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

486 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - P75 BREAKDOWN
®

Parts Breakdown

P75 Parts Breakdown

Typical Parts List
Note:
Plug 7 in position B gives clockwise rotation.

Plug 7 in position A gives counter-clockwise rotation.

Check valves in both positions

give bi-directional rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring CM-391-2686-025 12 Integral Drive Shaft See Option List
2 Outboard Bearing CM-391-0381-078 and Gear Set
Spacer CM-391-3383-018 13 Gasket Seals
3 Seal Retainer CM-391-2584-051 14 Gear Housing See Option List
4 “O” Ring CM-391-2881-457 15 Connecting Shaft See Option List
5 Seal (Pump) CM-391-2883-052 16 Bearing Carrier See Option List
Seal (Motor) CM-391-2883-094 17 Matched Gear Set See Option List
6 Shaft End Cover 18 Gear Housing See Option List
7 Check Assemblies CM-391-3681-001 19 Plug
Plug CM-391-2286-004 20 Port End Cover
8 Ring Seals CM-391-2585-011 21 Name Plate
9 Roller Bearings CM-391-0381-904 22 Drive Screws
10 Pocket Seals CM-391-2282-084 23 Washers
11 Thrust Plates CM-391-2185-920 24 Studs or Cap Screws
25 Nuts

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 487
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - P76 BREAKDOWN ®

Parts Breakdown

P76 Parts Breakdown

Typical Parts List
Note:
This page shows the typical arrangement of a 2-section unit.
It may not be pictorially correct and is not to scale.

Plug 7 in position B gives clockwise rotation.

Plug 7 in position A gives

counter-clockwise rotation.

Check valves in both positions

give bi-directional rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring CM-391-2686-025 13 Gasket Seals
2 Outboard Bearing CM-391-0381-078 14 Gear Housing See Option List
Spacer CM-391-3383-018 14A Dowel Pins
3 Seal Retainer CM-391-2584-051 15 Connecting Shaft See Option List
4 “O” Ring CM-391-2881-457 16 Bearing Carrier See Option List
5 Seal (Pump) CM-391-2883-052 17 Matched Gear Set See Option List
Seal (Motor) CM-391-2883-094 18 Gear Housing See Option List
6 Shaft End Cover 18A Dowel Pins
7 Check Assemblies CM-391-3681-001 19 Plug
Plug CM-391-2286-004 20 Port End Cover
8 Ring Seals CM-391-2585-011 21 Name Plate
9 Roller Bearings CM-391-0381-904 22 Drive Screws
10 Pocket Seals CM-391-2282-084 23 Washers
11 Thrust Plates CM-391-2185-920 24 Studs or Cap Screws
12 Integral Drive Shaft See Option List 25 Nuts
and Gear Set

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

488 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - P330 BREAKDOWN
®

Parts Breakdown

P330 Parts Breakdown

Typical Parts List
Note:
Plug 5 required in position A and B.

Item Description Part Number Item Description Part Number

1 Snap Ring 300-206 10 Gasket Seal 580-242
2 Outboard Bearing CM-391-0381-040 11 Dowel Pins (Solid) CM-391-2082-032
3 Seal CM-391-2883-058 12 Gear Housing See Option List
4 Shaft End Cover See Option List 13 Bearing Carrier See Option List
5 Plug 14 Connection Shaft See Option List
6 Bushings CM-391-0482-306 15 Matched Gear Set See Option List
7 Channel Seal CM-391-2885-065 16 Gear Housing See Option List
8 Thrust Plates CM-391-2185-956 17 Port End Cover
9 Integral Drive Shaft 18 Studs or Cap Screws
and Gear Set 19 Washers
20 Nuts

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 489
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849
COMMERCIAL - P350 BREAKDOWN ®

Parts Breakdown

P350 Parts Breakdown

Typical Parts List
Note:
Plug 5 in position B gives
clockwise rotation.

Plug 5 in position A gives

counter-clockwise rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring WHM-283 10 Gasket Seal 580-246
2 Outboard Bearing CM-391-0381-077 11 Dowel Pins (Solid) CM-391-2082-032
3 Seal CM-391-2883-103 12 Gear Housing See Option List
4 Shaft End Cover See Option List 13 Bearing Carrier See Option List
5 Plug 14 Connection Shaft See Option List
6 Bushings CM-391-0482-308 15 Matched Gear Set See Option List
7 Channel Seal CM-391-2885-066 16 Gear Housing See Option List
8 Thrust Plates CM-391-2185-957 17 Port End Cover
9 Integral Drive Shaft 18 Studs or Cap Screws
and Gear Set 19 Washers
20 Nuts

WORLDWIDE SALES OFFICE HOURS NORTH AMERICA

490 PHONE 1-727-796-1300 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-800-333-5617
FAX 1-727-797-8849 www.herculeshydraulics.com FAX 1-800-759-6391
 COMMERCIAL - P365 BREAKDOWN
®

Parts Breakdown

P365 Parts Breakdown

Typical Parts List
Note:
Plug 5 in position B gives
clockwise rotation.

Plug 5 in position A gives

counter-clockwise rotation.

Item Description Part Number Item Description Part Number

1 Snap Ring 300-315 10 Gasket Seal 580-250
2 Outboard Bearing CM-391-0381-078 11 Dowel Pins (Hollow) CM-391-2082-062
3 Seal CM-391-2883-052 12 Gear Housing See Option List
4 Shaft End Cover See Option List 13 Bearing Carrier See Option List
5 Plug 14 Connection Shaft See Option List
6 Bushings CM-391-0482-307 15 Matched Gear Set See Option List
7 Channel Seal CM-391-2885-064 16 Gear Housing See Option List
8 Thrust Plates CM-391-2185-955 17 Port End Cover
9 Integral Drive Shaft 18 Studs or Cap Screws
and Gear Set 19 Washers
20 Nuts

NORTH AMERICA SALES OFFICE HOURS WORLDWIDE

PHONE 1-800-333-5617 8 A.M. TO 8 P.M. EASTERN TIME PHONE 1-727-796-1300 491
FAX 1-800-759-6391 www.herculeshydraulics.com FAX 1-727-797-8849