Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    MCCB I Nterlock

    Uploaded by

    saravanan
    This document discusses installing sliding bar modules with Bowden cables to create interlocks between circuit breakers. The interlock uses a blocking principle where unlocking one circuit breaker locks the others in the OFF position. Sliding bar modules with slides are mounted on the circuit breakers and a Bowden cable is installed to prevent more than one from being released at a time, allowing only one circuit breaker to be ON. Bowden cable lengths of 0.5, 1.0, and 1.5 meters can be ordered. Possible interlock combinations and handle positions when interlocking two or three circuit breakers are shown. Other accessories may not be installable when the front interlock module is used.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MCCB I Nterlock

    Uploaded by

    saravanan
    16 views3 pages
    This document discusses installing sliding bar modules with Bowden cables to create interlocks between circuit breakers. The interlock uses a blocking principle where unlocking one circuit breaker locks the others in the OFF position. Sliding bar modules with slides are mounted on the circuit breakers and a Bowden cable is installed to prevent more than one from being released at a time, allowing only one circuit breaker to be ON. Bowden cable lengths of 0.5, 1.0, and 1.5 meters can be ordered. Possible interlock combinations and handle positions when interlocking two or three circuit breakers are shown. Other accessories may not be installable when the front interlock module is used.

    Original Title

    mccb i nterlock

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses installing sliding bar modules with Bowden cables to create interlocks between circuit breakers. The interlock uses a blocking principle where unlocking one circuit breaker locks the others in the OFF position. Sliding bar modules with slides are mounted on the circuit breakers and a Bowden cable is installed to prevent more than one from being released at a time, allowing only one circuit breaker to be ON. Bowden cable lengths of 0.5, 1.0, and 1.5 meters can be ordered. Possible interlock combinations and handle positions when interlocking two or three circuit breakers are shown. Other accessories may not be installable when the front interlock module is used.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views3 pages

    MCCB I Nterlock

    Uploaded by

    saravanan
    This document discusses installing sliding bar modules with Bowden cables to create interlocks between circuit breakers. The interlock uses a blocking principle where unlocking one circuit breaker locks the others in the OFF position. Sliding bar modules with slides are mounted on the circuit breakers and a Bowden cable is installed to prevent more than one from being released at a time, allowing only one circuit breaker to be ON. Bowden cable lengths of 0.5, 1.0, and 1.5 meters can be ordered. Possible interlock combinations and handle positions when interlocking two or three circuit breakers are shown. Other accessories may not be installable when the front interlock module is used.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Accessories

    4.7 Locking and interlocking

    Installation of other accessories


    When the cylinder lock is fitted in the accessories compartment of the circuit breaker, some
    other accessories cannot be installed, see chapter Possible combinations of of accessories
    (Page 142).

    See also
    Manual operators (Page 238)
    Draw-out technology (Page 215)

    4.7.3.2 Sliding bar with Bowden cable: Modules for sliding bar with Bowden cable
    A mutual interlock between up to three molded case circuit breakers can be implemented by
    means of the front Bowden cable interlock. This interlock functions according to the blocking
    principle: If one of the circuit breakers included in the interlock is unlocked, the Bowden
    cables move in such a way as to ensure that the other molded case circuit breakers are
    locked in the OFF (O) position.
    In order to implement a front Bowden cable interlock, sliding bar modules must be mounted
    on the 3VA molded case circuit breakers to be included in the interlock arrangement. Each of
    these modules is equipped with a slide which blocks or releases operation of the handle.

    ① Sliding bar module


    ② Slide

    3VA molded case circuit breakers


    282 Manual, 04/2015, A5E03603177010-02
    Accessories
    4.7 Locking and interlocking

    A Bowden cable must be installed in addition to the sliding bar modules. This cable prevents
    the slides from releasing more than one molded case circuit breaker at any one time. As a
    result, only one 3VA molded case circuit breaker at a time can be operated and only one
    molded case circuit breaker can be in the ON (I) position.

    ① 3VA1 160 molded case circuit breaker, blocked by slide


    ② 3VA2 250 molded case circuit breaker, released by slide

    Note
    For installation instructions, please refer to operating instructions "Sliding bar modules".

    Bowden cable lengths


    The following lengths of Bowden cable can be ordered:
    ● 0.5 m
    ● 1.0 m
    ● 1.5 m

    3VA molded case circuit breakers


    Manual, 04/2015, A5E03603177010-02 283
    Accessories
    4.7 Locking and interlocking

    Interlock combinations
    Interlocks can be implemented between the following 3VA molded case circuit breakers:

    Possible combinations of handle positions


    When a sliding bar with Bowden cable is installed to interlock two 3VA molded case circuit
    breakers, the following combinations of handle position are possible:

    When a sliding bar with Bowden cable is installed to interlock three 3VA molded case circuit
    breakers, the following combinations of handle position are possible:

    Installation of other accessories


    When the front Bowden cable interlock module is fitted, some other accessories cannot be
    installed, see chapter Possible combinations of of accessories (Page 142).

    3VA molded case circuit breakers


    284 Manual, 04/2015, A5E03603177010-02

    You might also like