AVR4806CI_E3.qxd 06.6.

26 6:57 PM Page 1

A/V Surround Receiver

AVR-4806CI
THX Ultra2 Certified 7.1-channel A/V Surround Receiver
Denon’s AVR-4806CI has technology, the reference sound quality and an extensive feature set, that previously was only available on its
critically acclaimed sibling, the AVR-5805. But it also stands alone with the introduction of some exciting new technologies, not found on
any previously released Denon receivers. The AVR-4806CI is the first product from Denon to offer XM Satellite Radio Ready ‘Connect and
Play’ capability. And for the ultimate in connection flexibility and ease of use, the AVR-4806CI is the first A/V receiver to offer Analog Video
to digital HDMI output conversion, which allows all video sources input through the AVR-4806CI to be output on one HDMI cable.
The highly regarded Audyssey MultEq setup system is included, to give more realism and higher sound reproduction to any environment
the AVR-4806CI may be installed. Denon original technologies are present as well, DDSC-Digital, AL24 Processing Plus and the latest
Denon Link 3rd digital interface.
Moreover, AVR-4806CI is equipped with various network functions such as internet radio, audio streaming and A/V amplifier network
Setup.

Audio Section ■ New Auto Set-up and Room EQ, featuring MultEQ from
■ THX Ultra2 Certified 7-channel High Power Amplifier Audyssey, for overall listening area support using supplied
Front 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) microphone
Center 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) ■ Full support for the most advanced surround playback formats
Surround 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) • Dolby Digital EX • Dolby Digital • Dolby Pro Logic IIx
Surround back 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) • Dolby Headphone • DTS-ES • DTS 96/24 • DTS Neo:6 • DTS • HDCD
■ THX, THX Surround EX, THX Ultra2 Post Processing Modes
The AVR-4806CI proudly bears the THX Ultra2 logo, certifying that it satisfies the ■ Original surround modes from Denon
strict standards of Lucasfilm, Inc., governing performance, features, sound quality, ■ XM Satellite Radio Ready with optional XM Passport System*
power, stability into low-impedance speaker loads (3.2 ohms and higher), and ease of *Subsciption to XM services also required.
operation.
■ 'New DDSC-Digital,' for dramatically improved processing performance Video Section
The New DDSC (Dynamic Discrete Surround Circuit)- Digital is a high-quality ■ Video Up/Down Conversion capable of output to HDMI port
surround sound reproduction circuit designed by Denon, and forms the core of the The AVR-4806CI includes a video up/down conversion function that allows the unit
design concept that Denon pursues for all its A/V amps: to faithfully reproduce the to be connected to the video monitor via a single cable regardless of the video input
original intent of content producers. Denon has succeeded in developing a fully dis- signal's format as follows:
crete design for the New DDSC-Digital in which high-performance ICs are used in 1) Composite video signals are converted to HDMI (*1), component video, & S-video;
independent blocks to form a signal processor that reproduces surround sound, and 2) S-video signals are converted to HDMI (*1), component video, & composite video;
the discrete design ensures that all channels are endowed with identical response 3) Component video signals are converted to HDMI (*1), composite video (*2), & S-video (*2).
and quality of sound. *1. Output signal up-converted to HDMI retains the resolution of the input signal.
*2. Down-conversion from component video to composite or S-video applies only to 480i input signals.
■ New 32-bit floating point DSP
■ 1080p upscaling
Three of the latest 32-bit floating point DSPs for the decoder.
• 24-bit/192-kHz D/A Converter ■ Component video switching
The latest high-accuracy 24-bit/192-kHz D/A converter has been employed The AVR-4806CI is equipped with 3 sets of component video inputs. There are also
for the audio DAC. 2 sets of component video outputs capable of simultaneous output, allowing compo-
• High-performance A/D Converter nent video with high picture quality to be enjoyed on two monitors at the same time.
A high-performance A/D converter of 24-bit/192-kHz quality has been used Settings do not need to be changed each time a monitor is switched. These component
to significantly boost S/N and dynamic range. video circuits achieve sharp HDTV video quality in a frequency range up to 100 MHz.
■ 'AL24 Processing Plus,' for high sound quality ■ High-speed, high-accuracy 12-bit/216-MHz Video DAC
■ DENON Link, enabling high-speed, high-grade digital signal transmission A high-speed, high-accuracy 12-bit/216-MHz video DAC is used in the video circuitry
■ IEEE 1394 digital interface for component video, S-video, and composite video signals. This DAC enhances the
reproducibility of delicate-level video signals, allowing high-definition video to be
■ Large-output Power Amp Section and Power Supply Configuration,
played back with greater fidelity to the original images. In addition, noise shaped
for stable high-power output
video (NSV) technology improves video S/N for greater signal linearity.
■ Stabilized, independent power supplies for each circuit
■ Composite and S-video signal processing
■ Chassis construction to suppress internal/external vibration
The AVR-4806CI uses a time base corrector (TBC) in converting composite video & S-
■ Pure Direct mode, for the pure enjoyment of music in high-quality sound
video signals to component video to suppress jitter in the video signal during playback.
■ Configurable Center, Surround and Surround Back Amplifiers
• Multi-zone system: a 5.1-channel theater in the main room and a monaural Expandability
environment in a second and third rooms. ■ Analog EXT IN terminal
• "Bi-amp" system: Front (L/R) channels are bi-wired in a 5.1-channel theater to ■ 3 Source and Zone Capability
improve playback quality in the front for enhanced listening enjoyment. ■ Ethernet and RS-232C terminals, for external 3rd party control system
■ Pre-amp with Variable Gain Volume The AVR-4806CI’s Ethernet and RS-232C ports provide support for serial control
using AMX, Crestron and others.
This manual downloaded from http://www.manualowl.com
AVR4806CI_E3.qxd 06.6.26 6:57 PM Page 2

AVR-4806CI
Other Functions ■ On-screen display, for easier, error-free operation
■ Internet connectivity ■ Variable subwoofer crossover switching
• Audio streaming • Internet radio (40/60/80/90/100/110/120/150/200/250 Hz)
• A/V receiver Network Setup (Web control) ■ Muting level settings (∞/-40dB/-20dB)
■ Auto Surround Back Channels ON function, ■ Audio Delay function (max. 6 frames or 200 msec)
for auto-detection of supporting sources ■ 3 User Mode Buttons
■ Auto Surround mode
■ New design and ease-of-use
• Front panel's large display.
• A cursor key and Buttons on the front panel
■ New EL remote controller with GLO-Key for easy operation

Inside of the trapdoor

Input/Output Terminals For Every A/V System Specifications
Audio Inputs Power Amplifier Section
12 Sets Analog Input Rated output *THD figures are power amp stage values.
PHONO, CD, TUNER, DVD, VDP, TV, DBS, VCR-1, VCR-2, VCR-3, V.AUX, CDR/TAPE Front 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
1 Set 8-ch Analog EXT. Input 165 W + 165 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER Center 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
8 Digital Inputs 165 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
OPTICAL x 5 Surround 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
COAXIAL x 3 165 W + 165 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
Audio Outputs Surround back
1 Set 8-ch Analog PRE Output 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER 165 W + 165 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
4 Sets Analog REC Output Preamplifier Section
VCR-1, VCR-2, VCR-3, CDR/TAPE Input sensitivity/impedance
2 Sets Analog Multi Zone Output PHONO(MM)
ZONE2 L/R, ZONE3 L/R 2.5 mV/47 kohms
3 Digital Outputs CD, DVD, VDP, TV, DBS, VCR-1, VCR-2, VCR-3, V.AUX, CDR/TAPE,
OPTICAL x 3 FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK, SUBWOOFER
Video Inputs 200 mV/47 kohms
1 Set DVI-D Video Input Output level/Load impedance
3 Sets HDMI Video Input (with Digital Audio) 1, 2, 3 FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER,
3 Sets Component Video Input 1, 2, 3 MULTI ZONE L/R
8 Sets Composite Input 1.2 V/10 kohms
DVD, VDP, TV, DBS, VCR-1, VCR-2, VCR-3, V.AUX VCR-1, VCR-2, VCR-3, V.AUX, CDR/TAPE
8 Sets S-Video Input 200 mV/47 kohms
DVD, VDP, TV, DBS, VCR-1, VCR-2, VCR-3, V.AUX Frequency response 10 Hz - 100 kHz; +0, -3 dB (DIRECT MODE)
1 Set DVI Input Signal-to-noise ratio 102 dB (DIRECT MODE)
Video Outputs RIAA deviation ±1 dB (20 Hz - 20 kHz)
1Set HDMI Video Output (with Digital Audio) Tone control Treble: ±10 dB at 10 kHz, Bass: ±10 dB at 100 Hz
MONITOR FM Section
2 Set Component Video Output Tuning frequency range 87.5 - 107.9 MHz
MONITOR-1, MONITOR-2 Usable sensitivity 1.0 µV (11.2 dBf)
4 Sets Composite Output AM Section
VCR-1, VCR-2, VCR-3, MONITOR Tuning frequency range 520 - 1710 kHz
4 Sets S-Video Output Usable sensitivity 18 µV
VCR-1, VCR-2, VCR-3, MONITOR General
2 Sets Multi Zone Output Power supply AC 120 V, 60 Hz
ZONE2 (Composite& S-Video), ZONE3 (Composite& S-Video) Power consumption 10.6A
Video/Audio Inputs Dimensions 434 (W) x 178 (H) x 500 (D) mm
3 Sets of HDMI 17-3/32” (W) x 7-0” (H) x 19-11/16” (D)
Video/Audio Outputs Weight 23.8 kg, 52 lbs 8oz
1 Set of HDMI

* Design and specifications are subject to change without notice.

* "Dolby", "Dolby Digital-EX", "Pro Logic IIx", and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation,
* "DTS", "DTS-ES" and "NEO:6" are trademarks of Digital Theater System, Inc.
* HDCD®, High Definition Compatible Digital® and Microsoft® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
* "DCDi" is a trademark of Faroudja, a division of Genesis Microchip Inc.
* Audyssey MultEQ is a trademark of Audyssey Laboratories. MultEQ and the Audyssey MultEQ logo are trademarks of Audyssey Laboratories, Inc.
* NSV and Sub Alias Filter are registered trademarks of Analog Devices, Inc.
* ©2006 XM Satellite Radio Inc. All rights reserved.

Denon Electronics (USA), LLC. Denon Brand Company

100 Corporate Drive Mahwah, New Jersey 07430 USA D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kanagawa 210-8569, Japan
TEL: 201-762-6500 www.usa.denon.com www.denon.com

Denon Canada Inc.

505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: 905-475-4085 www.denon.ca 16590606 A

This manual downloaded from http://www.manualowl.com