Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
16 views

Tutorial Induction Machine1

This document contains 7 questions regarding induction machines. Question 1 asks about determining frequency and induced voltage when a blocked rotor motor changes speed. Question 2 asks about determining various speeds and frequencies for a 4-pole induction motor operating at 5% slip. Question 3 asks about determining values for a 6-pole induction motor operating at 1164 rpm. Question 4 asks about determining shaft speed, power, and torque for a motor operating at reduced load. Question 5 asks about determining various values for a 4-pole motor operating at 5% slip. Questions 6 and 7 ask about determining equivalent circuits based on test results for squirrel cage induction motors.

Uploaded by

nickokinyunyu11
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

Tutorial Induction Machine1

This document contains 7 questions regarding induction machines. Question 1 asks about determining frequency and induced voltage when a blocked rotor motor changes speed. Question 2 asks about determining various speeds and frequencies for a 4-pole induction motor operating at 5% slip. Question 3 asks about determining values for a 6-pole induction motor operating at 1164 rpm. Question 4 asks about determining shaft speed, power, and torque for a motor operating at reduced load. Question 5 asks about determining various values for a 4-pole motor operating at 5% slip. Questions 6 and 7 ask about determining equivalent circuits based on test results for squirrel cage induction motors.

Uploaded by

nickokinyunyu11
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Tutorial Induction Machine

Q1. The frequency and induced voltage in the rotor of a certain six pole wound rotor induction
motor, whose shaft is blocked are 60Hz and 100V, respectively. Determine the corresponding
values when the rotor is running at 1100 r/min.

Q2. A 3-phase, 460 V, 100 hp, 60 Hz, four-pole induction machine delivers rated output power
at a slip of 0.05. Determine the:
(a) Synchronous speed and motor speed.
(b) Speed of the rotating air gap field.
(c) Frequency of the rotor circuit.
(d) Slip rpm.
(e) Speed of the rotor field relative to the
(i) rotor structure.
(ii) Stator structure.
(iii) Stator rotating field.
(f) Rotor induced voltage at the operating speed, if the stator-to-rotor turns ratio is 1 : 0.5.

Q3. The rotor of a certain 25hp, six pole, 60Hz induction motor has equivalent resistance and
equivalent reactance per phase of 0.10 and 0.54 respectively. The blocked rotor
voltage/phase (EBR) is 150V. If the rotor is turning at 1164 r/min, determine:

a) Synchronous speed
b) slip
c) rotor impedance
d) rotor current
e) rotor current if changing the shaft load resulted in 1.24 % slip
f) speed of the conditions in (e)

Q4. A three phase, 460V, 25hp, 60Hz, four pole induction motor operating at reduced load
requires 14.58kW input to the rotor. The rotor copper losses are 263W and the combined friction,
windage and stray power losses are 197W. Determine:

(a) Shaft speed


(b) Mechanical power developed
(c) Developed torque
Q5. A three phase, 280V, 60Hz, 20hp, four pole induction motor has the following equivalent
circuit parameters:

R1 = 0.12, R'2 = 0.1, X1 = X'2 = 0.25 and Xm = 10. The rotational loss is 400W. For 5%
slip, determine:

a) The motor speed in rpm and radians per sec (1800rpm, 188.5 rad/sec)
b) The motor current
c) The stator cu-loss
d) The air gap power
e) The rotor cu-loss
f) The shaft power
g) The developed torque and the shaft torque
h) The efficiency

Q6. A no-load test conducted on a 30 hp, 835 r/min, 440 V, 3-phase, 60 Hz squirrel-cage
induction motor yielded the following results:

No-load voltage (line-to-line): 440 V


No-load current: 14 A
No-load power: 1470 W
Resistance measured between two terminals: 0.5 
The locked-rotor test, conducted at reduced voltage, gave the following results:
Locked-rotor voltage (line-to-line): 163 V
Locked-rotor power: 7200 W
Locked-rotor current: 60 A
Determine the equivalent circuit of the motor

Q7. The following test results are obtained from a three-phase 60 hp, 2200 V, six-pole, 60 Hz
squirrel-cage induction motor.
• (1) No-load test:
• Supply frequency = 60 Hz, Line voltage = 2200 V
• Line current = 4.5 A, Input power = 1600 W
• (2) Blocked-rotor test:
• Frequency = 15 Hz, Line voltage = 270 V
• Line current = 25 A, Input power = 9000 W
• (3) Average DC resistance per stator phase: 2.8 
• (a) Determine the no-load rotational loss.
• (b) Determine the parameters of the IEEE-recommended equivalent circuit
(c) Determine the parameters (Vth, Rth, Xth) for the Thevenin equivalent circuit
Addition

Example 4.4 A three-phase, 460 V, 1740 rpm, 60 Hz, four-pole


wound-rotor induction motor has the following parameters per
phase:
R1 = 0.25 , R2  0.2 , X 1  X 2  0.5 , X m  30 
The rotational losses are 1700 watts. With the rotor terminals
short-circuited, find
(a) (i) Starting current when started direct on full voltage.
(ii) Starting torque.
(b) (i) Full-load slip.
(ii) Full-load current.
(iii) Ratio of starting current to full-load current.
(iv) Full-load power factor.
(v) Full-load torque.
(iv) Internal efficiency and motor efficiency at full load.
(c) (i) Slip at which maximum torque is developed.
(ii) Maximum torque developed.
(d) How much external resistance per phase should be
connected in the rotor circuit so that maximum torque occurs at
start?

You might also like