NOTES

[1] All Structural concrete to be class 20/20

5000
[2] Foundation depth to be determined on site
4000 [3] Excavations to be inspected before blinding is
laid
1000 1000 1000 1000
[4] Damp proof course (DPC) to be laid under all
walls

500
[5] Hardcore to be hand packed and Compacted
to Engineer's satisfaction.

[6] All reinforcements Must be inspected by

Structural Engineer before casting concrete.

[7] Strip foundation to Structural Engineers specs

[8] This drawing to be read in conjunction with any

relevant Architectural, Civil, Structural or any other
drawings

[9] Concrete cover to reinforcement steel to be as

follows:
26T12-01-200B1/ [a] Foundation = 50mm

4200
4000
5000

5000
[b] Columns = 40mm
26T12-01-200T1 [c] Beams = 25mm
[d] Slabs = 20mm

X X [10] High Yield Ribbed Bars to KS:ISO 6935-2 are

denoted "T"

[11] Mild steel reinforcement bars to BS 4449 are

denoted "R"

26T12-02-200B2/ [12] Any errors, discrepancies or omissions are to

be reported to the Engineer immediately for
26T12-02-200T2 correction before work is undertaken

[13] Assumed bearing Capacity=80KN/M2

[14] The Contractor must confirm dimensions on

500
site before commencing of any work

[15] Minimum crushing strength of masonry stones

or building blocks to be 7N/mm2

5000 [16] All black cotton soil shall be removed during

excavation of foundation.

[17] Minimum lap length for all reinforcement bars

shall be 50 x bar diameter

LOW LEVEL WATER TANK FOUNDATION LAYOUT

PLAN (Scale 1:25) (TANK SIZE 4.0x4.0x3.0m) - 1No.

ISSUES
DATE TO APPLICATION TO

1000 1000 1000 1000 No.

No. DATE BY
REVISIONS
DESCRIPTIONS GRP. LDR. C.S. ENG.
150

REFERENCE DRAWINGS
DESCRIPTIONS
600

CLIENT JOB No.

GL GL GL
PROJECT TITLE

DRAWING TITLE

01

02 02 02 02 02 02 02 02 02 02
250

C1/Sfb

M.O.T.I.PW. H. & UD DRG No. STR 01

FILE No.
SCALE(S) FIGURED DIMENSIONS ONLY TO
02 02 02 02 02 02 02 02 02 02 APPROVED BY
1:50, 1:25, 1:20. BE TAKEN FROM THIS DRAWING

ENG. H. J. N. Nyaanga
LOW LEVEL WATER TANK SECTION X---X (Scale 1:25) CHIEF ENGINEER (STRUCTURAL)
NAME SIGN DATE
DESIGN/DRAWN K. T. Mutai
CHECKED BY: Eng. G. S. Otipa
MINISTRY OF TRANSPORT, INFRASTRUCTURE,
PUBLIC WORKS, HOUSING AND
URBAN DEVELOPMENT
STATE DEPARTMENT OF PUBLIC WORKS
STRUCTURAL DEPARTMENT
 NOTES
[1] All Structural concrete to be class 20/20

ROOF STEEL NOTES [2] Foundation depth to be determined on site

500 [3] Excavations to be inspected before blinding is

1. This drawing must be read in conjuction with
250 250 architectural and any other relevant drawings. laid

2. The Contractor must confirm all dimensions on site [4] Damp proof course (DPC) to be laid under all

250 250
before commencing any work.
8 Nos. T-16 walls

500
3. All steel works to confirm to BS 5950
4. All welds shall be continous fillet weld and to [5] Hardcore to be hand packed and Compacted
BS 5135 and electrodes shall comply with BS 639 to Engineer's satisfaction.
T10 STIRRUPS @ 150mm c/c
5. All bolted connections shall be made with appropriate
SECTION B-B (Scale 1:25) washers under both the bolt head and nut. [6] All reinforcements Must be inspected by
6. All fabrication and connection details to be provided Structural Engineer before casting concrete.
by the steel fabricator for approval to the Project
25mm GROUT

25mm GROUT
Structural Engineer prior to commencement of fabrication. [7] Strip foundation to Structural Engineers specs
500 7. After fabrication of the steel work and all surfaces shall be
painted with two coats of red oxide primer. [8] This drawing to be read in conjunction with any
4Nos. H.D BOLTS 25mm Diameter 4Nos. H.D BOLTS 25mm Diameter 250 250
8. After transit and erection, all damaged paint work relevant Architectural, Civil, Structural or any other
x600mm Long @250mm c/c x600mm Long @250mm c/c
or coating shall be repaired to the Engineer's satisfaction. drawings

525 75
75

300
[9] Concrete cover to reinforcement steel to be as
G.L G.L G.L
600

600
follows:
525

[a] Foundation = 50mm

[b] Columns = 40mm

Min. Depth 1500mm

[c] Beams = 25mm

Determine on Site
125 125 125 125 [d] Slabs = 20mm

2000
T10 STIRRUPS @ 150mm c/c T10 STIRRUPS @ 150mm c/c
[10] High Yield Ribbed Bars to KS:ISO 6935-2 are
denoted "T"

B B B B
[11] Mild steel reinforcement bars to BS 4449 are
denoted "R"
01 02 800
2000 [12] Any errors, discrepancies or omissions are to
02 02 02 02 02 02 02 be reported to the Engineer immediately for
SECTION C--C PLAN BRACINGS 2550 correction before work is undertaken
Scale 1:50
500

500
[13] Assumed bearing Capacity=80KN/M2

[14] The Contractor must confirm dimensions on

01 01 01 01 01 01 01 site before commencing of any work
1050 2000 1050
4100 [15] Minimum crushing strength of masonry stones
MEMBER SIZES or building blocks to be 7N/mm2

CODE MEMBER SIZE C C C C [16] All black cotton soil shall be removed during
HIGH LEVEL WATER TANK SECTION A---A (Scale 1:25). excavation of foundation.
M1 100x100x4mm SHS
BR1 50x50x4mm Angle [17] Minimum lap length for all reinforcement bars
shall be 50 x bar diameter
PB1 50x50x4mm Angle
HB2 50x50x4mm Angle
4100 BK1 50x50x4mm Angle

1050 2000 1050 CP1 250x250x8mm Thick connector plate

B1 300x165x54Kg/m UB
B2 203x133x25Kg/m UB

ISSUES
DATE TO APPLICATION TO
1050

500 500
4 Nos. H.D BOLTS 25mm 5450 No. REVISIONS
22T16-01-200B2/
22T12-02-200T2

No. DATE BY DESCRIPTIONS GRP. LDR. C.S. ENG.

Diameter x 600mm Long 775 950 2000 950 775
500

500

REFERENCE DRAWINGS
775

775
DESCRIPTIONS
C C
125
125 125125

22T16-01-200B1/
1000

1000
CLIENT JOB No.
A 22T12-02-200T1 A
4100

4100
2000

1000

C C C C PROJECT TITLE

2000
5550
500 500
1000
500

500

DRAWING TITLE
1000
1050

1775
775

50 250 250 50 C1/Sfb

STR 01
150 150
225

M.O.T.I.PW. H. & UD DRG No.

785 1094 1096 596 1094 785
300

FILE No.
5450 SCALE(S) FIGURED DIMENSIONS ONLY TO
1:50, 1:25, 1:20. BE TAKEN FROM THIS DRAWING

GENERAL ARRANGEMENT OF STEEL WORKS APPROVED BY

ON THE DECKING OF THE WATER TANK ENG. H. J. N. Nyaanga

300x600x300mm DEEP CONCRETE PAD, Scale 1:50 CHIEF ENGINEER (STRUCTURAL)
NAME SIGN DATE
2-16mm Diameter , 250mm Long Bolts DESIGN/DRAWN K. T. Mutai
CHECKED BY: Eng. G. S. Otipa
ELEVATION (Scale 1:50) ELEVATION (Scale 1:50) MINISTRY OF TRANSPORT, INFRASTRUCTURE,
HIGH LEVEL WATER TANK FOUNDATION LAYOUT PLAN (Scale 1:25). PUBLIC WORKS, HOUSING AND
URBAN DEVELOPMENT
STATE DEPARTMENT OF PUBLIC WORKS
STRUCTURAL DEPARTMENT