Molykote 3402
Molykote 3402
Molykote 3402
MOLYKOTE® 3402-C LF
Anti-Friction Coating
Air-curing dry-film lubricant
Thinner
Recommended thinner is MOLYKOTE® L13 Thinner.
Curing
Typical properties (continued) Typical curing conditions:
Specification writers: These values are not intended for use in • Touch-dry after 5 minutes at 20°C (68°F)
preparing specifications. Please contact your local MOLYKOTE® • Fully cured after 120 minutes at 20°C (68°F)
sales representative prior to writing specifications on this product.
Packaging
This product is available in different standard container sizes.
Detailed container size information should be obtained from your
nearest MOLYKOTE® sales office or MOLYKOTE® distributor.
DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc.
unless otherwise noted.
© 2010-2019 DuPont.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
evaluation under end use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
infringe on patents.
Form No. 71-0041F-01 (07/19) AGP16093