MSDS INRUB TRANSPARENT 65 Backup

Material Safety Data Sheet (MSDS)
INRUB TRANSPARENT 65
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name INRUB TRANSPARENT 65

Other/Generic Name Thermoplastic Elastomer Compound
Manufacturer PT. Intera Lestari Polimer
Jln. Raya Serang KM 24.5 kp. Pasir Jaha , Ds. Sentul Jaya
Kec. Balaraja . Kab. Tangerang 15610 Banten - Indonesia
For Information In Indonesia Call: +62-215950699
Fax : +62-215950696
2. COMPOSITION AND INFORMATION ON INGREDIENTS
CHEMICAL NAME CAS NO. %
Thermoplastic Elastomer - > 99
3. HAZARDS IDENTIFICATION
Human Health Hazards Not hazardous at normal condition to the human body.
Heating may release small amounts of volatile irritants.
Environmental Hazards Not available.
Physical/Chemical Hazards The material burns slowly with high smoke density.
4. FIRST AID MEASURES
Skin Wash with water and soap

Eye Wash with water for 15 minutes, if irritation persist.
Inhalation For inhalation of vapor occur during molten pellet, remove
to fresh air
Ingestion Not expected to occur
Note To Physician No specific advice, treat accord
5. FIRE FIGHTING MEASURES
Suitable Extinguishing Media Water, water/foam, carbon dioxide.

Unsuitable Extinguishing Media No restrictions.
Special Exposure Hazards None known.
Combustion Products Carbon monoxide, carbon dioxide, products of incomplete
combustion.
Protection Of Firefighters Fire fighters should wear full protective clothing including
self-contained breathing apparatus. Keep personnel
removed and upwind of fire.
6. ACCIDENTAL RELEASE MEASURES

Methods For Cleanup
In Case Of Large Spills Collect spilled material and reuse if possible.
In Case Of Small Spills Collect spilled material in containers and dispose
appropriatery
7. HANDLING AND STORAGE
Handling When using do not eat, drink or smoke. Wash hands after
handling.
Storage Store in a clean, dry, dark area to maintain product quality.
Keep in original containers or use black covers to protect
from artificial or natural light. The preferred storage
temperature is 20-45 C. Do not put at room with high
humidity
8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Engineering Control Use adequate ventilation during heating processes, for
storage and ordinary handling, general ventilation is
adequate
Personal Protective Equipment
Skin Protection Protective garments and gloves when handling
molten material
Eye Protection Chemical goggles around molten material
Respiratory Protection During melting and conveying molten, use an organic vapor
respirator
Additional Recommendations Not generally required
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Clear to opaque pellet

Odor None to mild
Specific Gravity 0.80-0.90 (water = 1)
Solubility In Water Insoluble
Decomposition Temperature > 280oC
10. STABILITY AND REACTIVITY
Chemical Stability Product is stable at ambient temperature and pressure.
Conditions To Avoid Extreme temperature, >280°C will cause thermal
decomposition.
Hazardous Decomp. Products Carbon monoxide, carbon dioxide and partially oxidized
hydrocarbons
Hazardous Reaction Will not occur.
11. TOXICOLOGICAL INFORMATION
Immediate (Acute) Effects Not determined

Suchronic And Chronic Effects Not determined
Other Data No other data developed
12. ECOLOGICAL INFORMATION
No data have been developed on this subject. These polymeric product are not soluble in water,
they are not considered biodegradable
13. DISPOSAL CONSIDERATION
Method of disposal Reuse if possible. Material as supplied is not characterized

as hazardous under RCRA (Resource and Conservation
Recovery Act). Incinerate or dispose as directed by local,
state and federal regulations.
14. TRANSPORT INFORMATION
US DOT HAZARD CLASS Not regulated

US DOT ID NUMBER Not applicable
For additional on shipping regulations affecting this material, contact the information number
found on the first page
15. REGULATORY INFORMATION
ADDITIONAL REGULATORY INFORMATION
None
16. OTHER INFORMATION
Current issue date February 07th, 2018
Other information None
This information is furnished without warranty, representation, inducement or license of any

kind, except that it is accurate to the best of INTERA LESTARI POLIMER knowledge, obtain
from source believed by INTERA LESTARI POLIMER to be accurate. Customers are
encouraged to conduct their own test, before using any product.
PSD/INRUB TRANS
65/II/18

MSDS INRUB TRANSPARENT 65 Backup

Uploaded by

Copyright:

Available Formats

MSDS INRUB TRANSPARENT 65 Backup

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MSDS INRUB TRANSPARENT 65 Backup

Uploaded by

Copyright:

Available Formats

Material Safety Data Sheet (MSDS)

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name INRUB TRANSPARENT 65

2. COMPOSITION AND INFORMATION ON INGREDIENTS

CHEMICAL NAME CAS NO. %

Thermoplastic Elastomer - > 99

4. FIRST AID MEASURES

Skin Wash with water and soap

Suitable Extinguishing Media Water, water/foam, carbon dioxide.

6. ACCIDENTAL RELEASE MEASURES

7. HANDLING AND STORAGE

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance Clear to opaque pellet

11. TOXICOLOGICAL INFORMATION

Immediate (Acute) Effects Not determined

12. ECOLOGICAL INFORMATION

13. DISPOSAL CONSIDERATION

Method of disposal Reuse if possible. Material as supplied is not characterized

14. TRANSPORT INFORMATION

US DOT HAZARD CLASS Not regulated

15. REGULATORY INFORMATION

ADDITIONAL REGULATORY INFORMATION

Current issue date February 07th, 2018

Other information None

This information is furnished without warranty, representation, inducement or license of any

You might also like