Cat ®

910
Compact Wheel Loader

Features:
Cat®
n  C3.6 Engine – EU Stage V and U.S. EPA Tier 4 Final compliant. Tuned
n  Drivetrain – Smooth shifting and powerful acceleration is
Cat
n  Optimized Z-bar Loader Linkage – The Cat Optimized Z-bar Loader matched with modulated hydrostatic braking in the inching/braking
linkage combines the digging efficiency of a traditional Z-bar with tool pedal, creating a rhythm for material moving. Creeper and electronic
carrier capabilities for great performance and versatility. With parallel engine speed control makes broom and snow blower work easy.
lift and high tilt forces throughout the working range you can safely Operator tunes between smooth or aggressive shifting with the
and confidently handle loads with precise control. push of a button.
n Work Tools – The 910 features the Cat exclusive, Performance Series
 n Cab – All around visibility is further enhanced with the availability

Buckets, as well as high visibility pallet forks. These tools enhance of a rearview camera. The deluxe cab ensures operator comfort
productivity and are available with either an Integrated Toolcarrier with a heated, air suspension seat and easy to use controls. Available
(IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, features such as Implement and Hystat Aggressiveness, Ride Control,
grapple buckets, multi-purpose buckets and other work tools remain Lift and Tilt Kickouts, Fork/Bucket Mode and Rimpull Control allow the
compatible. operator to customize the machine via a soft touch keypad.
n Hydraulics and Controls – State of the art electro-hydraulic system
 n Serviceability – Extended service intervals and excellent service access

provides low effort, fine control with fast cycle times. All-in-one make daily checks quick and easy allowing you to get to work sooner.
joystick helps keep eyes on the work. Operator can adjust machine n Efficiently Powerful with its high full turn tipping loads, powerful

responsiveness with the push of a button, which allows the operator breakout forces and efficient engine power delivers a balanced
to set up the machine exactly the way they want it based on the solution for all customer applications.
application. n Standard Fuel Savings Features such as Eco Mode, On Demand Cooling

Fan, and Auto Engine Idle Shutdown make the 910 both powerful and
fuel efficient.

Specifications
Engine Engine (continued)
Engine Model Cat C3.6
®
Maximum Gross Torque:
Maximum Gross Power: SAE J1995 454 N·m 335 lbf-ft
Maximum Engine Speed 2,350 RPM ISO 14396 450 N·m 332 lbf-ft
SAE J1995 83 kW 111 hp Maximum Net Torque:
ISO 14396 82 kW 110 hp SAE J1349 446 N·m 329 lbf-ft
ISO 14396 (DIN) 82 kW 111 hp ISO 9249 443 N·m 327 lbf-ft
Rated Net Power:
• Engine meets Tier 4 Final/Stage V emission standards.
Rated Engine Speed 2,200 RPM
• Net power advertised is the power available at the flywheel plus
SAE J1349 74 kW 99 hp front drive implement pump when the engine is equipped with fan,
ISO 9249 73 kW 98 hp air cleaner, muffler and alternator.
ISO 9249 (DIN) 73 kW 99 hp
Displacement 3.6 L 220 in3
Bore 98 mm 3.86 in
Stroke 120 mm 4.72 in
910 Compact Wheel Loader

Buckets Transmission
Bucket Capacities – General Purpose 1.3-1.9 m3 1.7-2.5 yd3 Forward and Reverse:
Bucket Capacities – Light Material 2.5-3.5 m3 3.3-4.6 yd3 Speed Range 1* 10 km/h 6.3 mph
Speed Range 2* 20 km/h 12.5 mph
Steering Speed Range 3 40 km/h 25 mph
Steering Articulation Angle (each direction) 40 degrees *Creeper Control allows speed control from a stand still up to 10 km/h
Maximum Flow – Steering Pump 66 L/min 17 gal/min (6.3 mph). The Creeper Control will only work in Range 1.
Maximum Working Pressure –
Steering Pump 18 500 kPa 2,683 psi
Tires
Steering Cycle Times (full left to full right):
Standard Size 15.5 R25 L2 XTLA
At 2,350 RPM: 90 RPM
steering wheel speed 3.2 seconds Other Choices Include: 17.5 R25 L2 XTLA
Number of Steering Wheel Turns – full left 15.5 R25 L3 XHA2
to full right or full right to full left 3.75 turns 17.5 R25 L3 XHA2
17.5-25 L2/L3 SGL
Loader Hydraulic System 17.5-25 L3 HRL D/L-3A
Maximum Flow – Implement Pump 122 L/min 32 gal/min 17.5 R25 L2 Snow
3rd Function, Maximum Flow 90 L/min 24 gal/min • Other tire choices are available. Contact your Cat dealer for details.
4th Function, Maximum Flow 90 L/min 24 gal/min • In certain applications, the loader’s productive capabilities may exceed
the tire’s tonnes-km/h (ton-mph) capabilities.
Maximum Working Pressure –
Implement Pump 23 500 kPa 3,408 psi • Caterpillar recommends that you consult a tire supplier to evaluate all
conditions before selecting a tire model.
Relief Pressure – Tilt Cylinder 34 000 kPa 4,931 psi
3rd Function Maximum Working Pressure 21 000 kPa 3,046 psi
4th Function Maximum Working Pressure 21 000 kPa 3,046 psi
Cab
ROPS ISO 3471:2008
Hydraulic Cycle Times: FOPS ISO 3449:2005
Raise (ground level to maximum lift) 5.2 seconds • Cab and Rollover Protective Structures (ROPS) are standard in
Dump (at maximum reach) 1.4 seconds North America and Europe.
Rack Back 2.2 seconds
Float Down (maximum lift to ground level) 3.7 seconds Axles
Total Cycle Time 12.5 seconds Front Fixed
Locking differential (standard)
Service Refill Capacities Rear Oscillating ±11 degrees
Fuel Tank 165 L 43.6 gal Locking differential (Standard)
Cooling System 21.5 L 5.7 gal
Engine Crankcase 10 L 2.6 gal
Axles:
Front Center Differential 7.5 L 2.0 gal
Rear Center Differential 7.5 L 2.0 gal
Hydraulic System (including tank) 98 L 25.9 gal
Hydraulic Tank 55 L 14.5 gal
Transmission 3.2 L 0.8 gal
Diesel Exhaust Fluid (DEF) Tank 18 L 4.8 gal

• DEF used in Cat SCR systems must meet the requirements outlined in the
International Organization for Standardization (ISO) standard 22241-1.

2
 910 Compact Wheel Loader

Dimensions and Operating Specifications (All dimensions are approximate. Dimensions vary with bucket and tire choice.)
23

17

19

24 14
13 21

12
11 2
1 22
10
9
27
25

16
26 3
15 4

7 6
18
8
20
5

*Vary with bucket. **Vary with tire. Standard Lift – IT Standard Lift – ISO Standard Lift – Pin On
Bucket @100% fill factor used for below data 1.3 m3 1.7 yd3 1.3 m3 1.7 yd3 1.4 m3 1.8 yd3
Tire used for below data 15.5 R25 L2 XTLA 15.5 R25 L2 XTLA 15.5 R25 L2 XTLA
** 1 Height: Ground to Cab 3020 mm 9'10" 3020 mm 9'10" 3020 mm 9'10"
** 2 Height: Ground to Beacon 3210 mm 10'6" 3210 mm 10'6" 3210 mm 10'6"
** 3 Height: Ground Axle Center 600 mm 1'11" 600 mm 1'11" 600 mm 1'11"
** 4 Height: Ground Clearance 348 mm 1'1" 348 mm 1'1" 348 mm 1'1"
* 5 Length: Overall 6337 mm 20'9" 6394 mm 20'11" 6269 mm 20'6"
6 Length: Rear Axle to Bumper 1634 mm 5'4" 1634 mm 5'4" 1590 mm 5'2"
7 Length: Hitch to Front Axle 1300 mm 4'3" 1300 mm 4'3" 1300 mm 4'3"
8 Length: Wheel Base 2600 mm 8'6" 2600 mm 8'6" 2600 mm 8'6"
* 9 Clearance: Bucket at 45 Degrees 2809 mm 9'2" 2772 mm 9'1" 2846 mm 9'4"
** 10 Clearance: Load Over Height 3284 mm 10'9" 3284 mm 10'9" 3284 mm 10'9"
** 11 Clearance: Level Bucket 3418 mm 11'2" 3418 mm 11'2" 3418 mm 11'2"
** 12 Height: Bucket Pin 3673 mm 12'0" 3673 mm 12'0" 3673 mm 12'0"
** 13 Height: Overall 4563 mm 14'11" 4599 mm 15'1" 4563 mm 14'11"
* 14 Reach: Bucket at 45 Degrees 820 mm 2'8" 863 mm 2'9" 788 mm 2'7"
15 Carry Height: Bucket Pin 319 mm 1'0" 317 mm 1'0" 319 mm 1'0"
** 16 Dig Depth 117 mm 4.5" 117 mm 4.5" 117 mm 4.5"
17 Width: Bucket 2401 mm 7'10" 2401 mm 7'10" 2401 mm 7'10"
18 Width: Tread Center 1800 mm 5'10" 1800 mm 5'10" 1800 mm 5'10"
19 Turning Radius: Over Bucket 5199 mm 17'0" 5216 mm 17'1" 5180 mm 16'11"
20 Width: Over Tires 2259 mm 7'4" 2259 mm 7'4" 2259 mm 7'4"
21 Turning Radius: Outside of Tires 4716 mm 15'5" 4716 mm 15'5" 4716 mm 15'5"
22 Turning Radius: Inside of Tires 2446 mm 8'0" 2446 mm 8'0" 2446 mm 8'0"
23 Rack Angle at Full Lift 57 degrees 57 degrees 57 degrees
24 Dump Angle at Full Lift 47 degrees 48 degrees 48 degrees
25 Rack Angle at Carry 42 degrees 42 degrees 42 degrees
26 Departure Angle 33 degrees 33 degrees 33 degrees
27 Articulation Angle 40 degrees 40 degrees 40 degrees
*Tipping Load – Straight (ISO 14397-1) 5845 kg 12,882 lb 5709 kg 13,105 lb 6187 kg 13,635 lb
*Tipping Load – Full Turn (ISO 14397-1) 4898 kg 10,795 lb 4779 kg 10,532 lb 5207 kg 11,475 lb
*Breakout Force 6741 kg 14,857 lb 6298 kg 11,632 lb 7327 kg 16,148 lb
*Operating Weight 8086 kg 17,822 lb 8109 kg 18,102 lb 7899 kg 17,408 lb
Dimensions listed are for a machine configured with bolt-on cutting edges and an 80 kg (176 lb) operator.

3
910 Compact Wheel Loader

Dimensions and Operating Specifications (All dimensions are approximate. Dimensions vary with bucket and tire choice.)
*Vary with bucket. **Vary with tire. High Lift – IT High Lift – ISO High Lift – Pin On
Bucket @100% fill factor used for below data 1.3 m3 1.7 yd3 1.3 m3 1.7 yd3 1.4 m3 1.8 yd3
Tire used for below data 15.5 R25 L2 XTLA 15.5 R25 L2 XTLA 15.5 R25 L2 XTLA
** 1 Height: Ground to Cab 3020 mm 9'10" 3020 mm 9'10" 3020 mm 9'10"
** 2 Height: Ground to Beacon 3210 mm 10'6" 3210 mm 10'6" 3210 mm 10'6"
** 3 Height: Ground Axle Center 600 mm 1'11" 600 mm 1'11" 600 mm 1'11"
** 4 Height: Ground Clearance 348 mm 1'1" 348 mm 1'1" 348 mm 1'1"
* 5 Length: Overall 6869 mm 22'6" 6926 mm 22'8" 6802 mm 22'3"
6 Length: Rear Axle to Bumper 1634 mm 5'4" 1634 mm 5'4" 1590 mm 5'2"
7 Length: Hitch to Front Axle 1300 mm 4'3" 1300 mm 4'3" 1300 mm 4'3"
8 Length: Wheel Base 2600 mm 8'6" 2600 mm 8'6" 2600 mm 8'6"
* 9 Clearance: Bucket at 45 Degrees 3176 mm 10'5" 3140 mm 10'3" 3219 mm 10'6"
** 10 Clearance: Load Over Height 3397 mm 11'1" 3397 mm 11'1" 3397 mm 11'1"
** 11 Clearance: Level Bucket 3774 mm 12'4" 3774 mm 12'4" 3775 mm 12'4"
** 12 Height: Bucket Pin 4030 mm 13'2" 4030 mm 13'2" 4030 mm 13'2"
** 13 Height: Overall 4920 mm 16'1" 4955 mm 16'3" 4891 mm 16'0"
* 14 Reach: Bucket at 45 Degrees 1054 mm 3'5" 1100 mm 3'7" 1004 mm 3'3"
15 Carry Height: Bucket Pin 480 mm 1'6" 480 mm 1'6" 480 mm 1'6"
** 16 Dig Depth 295 mm 11.6" 295 mm 11.6" 294 mm 11.6"
17 Width: Bucket 2401 mm 7'10" 2401 mm 7'10" 2401 mm 7'10"
18 Width: Tread Center 1800 mm 5'10" 1800 mm 5'10" 1800 mm 5'10"
19 Turning Radius: Over Bucket 5440 mm 17'10" 5452 mm 17'10" 5419 mm 17'9"
20 Width: Over Tires 2259 mm 7'4" 2259 mm 7'4" 2259 mm 7'4"
21 Turning Radius: Outside of Tires 4716 mm 15'5" 4716 mm 15'5" 4716 mm 15'5"
22 Turning Radius: Inside of Tires 2446 mm 8'0" 2446 mm 8'0" 2446 mm 8'0"
23 Rack Angle at Full Lift 59 degrees 60 degrees 59 degrees
24 Dump Angle at Full Lift 43 degrees 44 degrees 44 degrees
25 Rack Angle at Carry 50 degrees 49 degrees 50 degrees
26 Departure Angle 33 degrees 33 degrees 33 degrees
27 Articulation Angle 40 degrees 40 degrees 40 degrees
*Tipping Load – Straight (ISO 14397-1) 5099 kg 11,239 lb 4998 kg 11,014 lb 5388 kg 11,875 lb
*Tipping Load – Full Turn (ISO 14397-1) 4240 kg 9,344 lb 4150 kg 9,146 lb 4503 kg 9,925 lb
*Breakout Force 6800 kg 14,987 lb 6351 kg 13,998 lb 7392 kg 16,291 lb
*Operating Weight 8428 kg 18,575 lb 8450 kg 18,624 lb 8240 kg 18,161 lb
Dimensions listed are for a machine configured with bolt-on cutting edges and an 80 kg (176 lb) operator.

4
 910 Environmental Declaration

The following information applies to the machine at the time of final manufacture as configured for sale in the regions covered in this
document. The content of this declaration is valid as of the date issued; however, content related to machine features and specifications
are subject to change without notice. For additional information, please see the machine’s Operation and Maintenance Manual.
For more information on sustainability in action and our progress, please visit https://www.caterpillar.com/en/company/sustainability.

Engine Features and Technology

• The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V • The following features and technology may contribute to
emission standards. fuel savings and/or carbon reduction. Features may vary.
• Cat diesel engines are required to use ULSD (ultra-low sulfur Consult your Cat dealer for details.
diesel fuel with 15 ppm of sulfur or less) or ULSD blended with – Engine Idle Shutdown
the following lower-carbon intensity fuels up to: – Advanced Electro Hydraulics
 20% biodiesel FAME (fatty acid methyl ester) – Engine Demand Fan
 100% renewable diesel, HVO (hydrotreated vegetable oil)
– ECO Mode
and GTL (gas-to-liquid) fuels
Refer to guidelines for successful application. Please consult your – Hydrostatic Transmission
Cat dealer or “Caterpillar Machine Fluids Recommendations” – Programmable Linkage Sensors and Kickouts
(SEBU6250) for details. – Performance Series Buckets and Optimized Z Bar Linkage
– Rimpull
Air Conditioning System – Remote Flash and Remote Troubleshoot

• The air conditioning system on this machine contains the Recycling

fluorinated greenhouse gas refrigerant R134a (Global Warming
Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant • The materials included in machines are categorized as below with
which has a CO2 equivalent of 1.430 metric tonnes (1.57 tons). approximate weight percentage. Because of variations of product
configurations, the following values in the table may vary.
Paint Material Type Weight Percentage
Steel 60.41%
• Based on best available knowledge, the maximum allowable
concentration, measured in parts per million (PPM), of the Iron 27.24%
following heavy metals in paint are: Nonferrous Metal 2.77%
– Barium < 0.01%
Mixed Metal 0.71%
– Cadmium < 0.01%
– Chromium < 0.01% Mixed-Metal and Nonmetal 0.80%
– Lead < 0.01% Plastic 1.16%
Rubber 2.46%
Sound Performance
Mixed Nonmetallic 0.04%
With cooling fan speed at maximum value: Fluid 1.82%
Operator Sound Pressure Level (ISO 6396:2008) – 77 dB(A)* Other 2.59%
Exterior Sound Power Level (ISO 6395:2008) – 103 dB(A)** Uncategorized 0%
Exterior Sound Pressure Level (SAE J88:2013) – 101 dB(A)** Total 100%
*Measurements were conducted with properly installed and • A machine with higher recyclability rate will ensure more efficient
maintained cab doors and windows closed. usage of valuable natural resources and enhance End-of-Life
**The labeled sound power level for the CE and UK marked value of the product. According to ISO 16714 (Earthmoving
configurations when measured according to the test procedure machinery – Recyclability and recoverability – Terminology and
and conditions specified in 2000/14/EC and UK Noise calculation method), recyclability rate is defined as percentage by
Regulation 2001 No. 1701. mass (mass fraction in percent) of the new machine potentially
able to be recycled, reused, or both.
Oils and Fluids All parts in the bill of material are first evaluated by component
type based on a list of components defined by the ISO 16714
• Caterpillar factory fills with ethylene glycol coolants. Cat Diesel and Japan CEMA (Construction Equipment Manufacturers
Engine Antifreeze/Coolant (DEAC) and Cat Extended Life Association) standards. Remaining parts are further evaluated for
Coolant (ELC) can be recycled. Consult your Cat dealer for recyclability based on material type.
more information.
Because of variations of product configurations, the following
• Cat Bio HYDO™ Advanced is an EU Ecolabel approved
value in the table may vary.
biodegradable hydraulic oil.
• Additional fluids are likely to be present, please consult the
Operations and Maintenance Manual or the Application and Recyclability – 95%
Installation guide for complete fluid recommendations and
maintenance intervals.

5
Notes

6
 Notes

7
910 Compact Wheel Loader

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEHQ8246-01 (10-2022)
at www.cat.com Replaces AEHQ8246
© 2022 Caterpillar Build Number: 14A
All rights reserved (EU, Am North, ANZP, Japan)

Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the
“Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.