Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    D41d8caa 98167

    Uploaded by

    fercomando
    This document provides approval from Transport Canada for the installation of a Fast Rope (Structural Provisions) Kit on Bell 212, 412, and 412EP aircraft. The kit may be installed in accordance with Aeronautical Accessories Inc. instructions, but shall not be utilized without further design approval and only when the rotorcraft is in hover. The approval is only applicable to the specified aircraft types and installers must ensure no adverse interactions with other modifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    D41d8caa 98167

    Uploaded by

    fercomando
    28 views43 pages
    This document provides approval from Transport Canada for the installation of a Fast Rope (Structural Provisions) Kit on Bell 212, 412, and 412EP aircraft. The kit may be installed in accordance with Aeronautical Accessories Inc. instructions, but shall not be utilized without further design approval and only when the rotorcraft is in hover. The approval is only applicable to the specified aircraft types and installers must ensure no adverse interactions with other modifications.

    Original Title

    D41D8CAA-98167

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides approval from Transport Canada for the installation of a Fast Rope (Structural Provisions) Kit on Bell 212, 412, and 412EP aircraft. The kit may be installed in accordance with Aeronautical Accessories Inc. instructions, but shall not be utilized without further design approval and only when the rotorcraft is in hover. The approval is only applicable to the specified aircraft types and installers must ensure no adverse interactions with other modifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views43 pages

    D41d8caa 98167

    Uploaded by

    fercomando
    This document provides approval from Transport Canada for the installation of a Fast Rope (Structural Provisions) Kit on Bell 212, 412, and 412EP aircraft. The kit may be installed in accordance with Aeronautical Accessories Inc. instructions, but shall not be utilized without further design approval and only when the rotorcraft is in hover. The approval is only applicable to the specified aircraft types and installers must ensure no adverse interactions with other modifications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 43

    Transport Canada Transports Canada

    1+1
    Department of Transport

    This approval is issued to: Approval Number: SHOO-5

    Aeronautical Accessories Inc.


    Issue Number:
    P.O. Box 3689
    Bristol
    Tennessee 37625-3689 Date of Approval: 2000 January 20

    Date of Issue: 2000 January 20

    Responsible Office: Prairie and Northern

    Aircraft/Engine Type/Model: Bell 212, 412, 412EP

    Canadian Type Certificate or


    Equivalent: H4SW

    Description of Design Change: Installation of Fast Rope (Structural Provisions) Kit per FAA STC SR01884AT,
    dated 1999 April 15, or later FAA approved revision.

    Installation/Operating Data, Installation in accordance with FAA approved Aeronautical Accessories Inc.
    Required Equipment and Installation Instructions Report No. AA-98167, dated 1998 December 18, or
    limitations: later FAA approved revision.

    Restrictions: This kit may be installed, but shall not be utilised without
    further design approval.
    This kit is not intended for deployment, other activation, or use
    unless the Rotorcraft is in hover.

    Conditions: This approval is only applicable to the type/model of


    aeronautical product specified therein. Prior to incorporating this
    modification, the installer shall establish that the Interrelationship
    between this change and any other modification(s) incorporated will not
    adversely affect the airworthiness of the modified product.

    ?stZ2S O.S. Austen


    For Minister of Transport
    Page 1 of 1

    Canada

    You might also like