XM 19
XM 19
XM 19
http://www.hpalloy.com/DataSheets/corrosion.htm 20/11/04
Corrosion Page 2 of 4
http://www.hpalloy.com/DataSheets/corrosion.htm 20/11/04
Corrosion Page 3 of 4
MONEL® alloy 400 (UNS N04400) Ni 66.5 Cu 31.5 High strength, good
weld ability, excellent corrosion resistance over wide range of
temperatures and conditions.
Valves, pumps, shafts, marine fixtures, fasteners, electrical, and electronic
components, processing equipment, petroleum refining and production
equipment, feed water heaters and other heat exchangers.
MONEL® alloy K-500 (UNS N05500) Ni 65.5 Cu 29.5 Al 2.7, Ti 0.6 Age-
hardenable version of MONEL alloy 400 for increased strength and
hardness. Good strength and ductility from -423 to 1200°F.
Pump shafts, doctor blades and scrapers, oil-well drill collars and
instruments, electronic components, springs, valve trim, fasteners.
INCONEL® alloy 600 (UNS N06600) Ni 76.0, Cr 15.5, Fe 8.0 High nickel,
high chromium content for resistance to oxidizing and reducing
environments; for severely corrosive environments at elevated
temperatures. Good oxidation resistance to 2150°F. Good formability.
Furnace muffles, electronic components, chemical and food processing
equipment, heat treating equipment, nuclear steam generator tubing.
HASTELLOY® & HAYNES® are registered trade names of Haynes International, Inc.
MONEL®, INCOLOY® & INCONEL® are registered trade names of INCO family of companies.
MP35N® is a registered trade name of Maryland Specialty Wire, Inc.
NITRONIC ® is a registered trade name of Armco, Inc.
CARPENTER ® CUSTOM 450®, CUSTOM 455® & 20Cb-3® are registered trade names of Carpenter Technology
Corporation.
http://www.hpalloy.com/DataSheets/corrosion.htm 20/11/04
Corrosion Page 4 of 4
Disclaimer
This information is provided for information purposes only. "As is." High Performance
Alloys, Inc. makes no warranty of any kind with respect to the subject matter or accuracy
of the information. High Performance Alloys, Inc. specifically disclaims all warranties,
expressed, implied or otherwise, including without limitation, all warranties of
merchantability and fitness for a particular purpose.
This publication may include technical inaccuracies or typographical errors, changes may
be made to the information herein. If errors are found, please submit the correction via e-
mail to : WebMaster@HPAlloy.com, include correction, and page address if possible.
http://www.hpalloy.com/DataSheets/corrosion.htm 20/11/04