Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Bending Revisi V2

    Uploaded by

    Kelompok 1 PKKMB FT UNJ 2018
    The stress analysis report summarizes the static analysis of a part called Revisi BendingV2. It lists the materials used, applied forces including 260kN, 700kN and 300kN, constrained areas, and results of the analysis showing the minimum and maximum von mises stress, principal stresses, displacement, and safety factor. The maximum von mises stress is 1603.72 MPa and maximum displacement is 2.00385 mm. Reaction forces and moments on the constrained areas are also reported.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bending Revisi V2

    Uploaded by

    Kelompok 1 PKKMB FT UNJ 2018
    19 views16 pages
    The stress analysis report summarizes the static analysis of a part called Revisi BendingV2. It lists the materials used, applied forces including 260kN, 700kN and 300kN, constrained areas, and results of the analysis showing the minimum and maximum von mises stress, principal stresses, displacement, and safety factor. The maximum von mises stress is 1603.72 MPa and maximum displacement is 2.00385 mm. Reaction forces and moments on the constrained areas are also reported.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The stress analysis report summarizes the static analysis of a part called Revisi BendingV2. It lists the materials used, applied forces including 260kN, 700kN and 300kN, constrained areas, and results of the analysis showing the minimum and maximum von mises stress, principal stresses, displacement, and safety factor. The maximum von mises stress is 1603.72 MPa and maximum displacement is 2.00385 mm. Reaction forces and moments on the constrained areas are also reported.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views16 pages

    Bending Revisi V2

    Uploaded by

    Kelompok 1 PKKMB FT UNJ 2018
    The stress analysis report summarizes the static analysis of a part called Revisi BendingV2. It lists the materials used, applied forces including 260kN, 700kN and 300kN, constrained areas, and results of the analysis showing the minimum and maximum von mises stress, principal stresses, displacement, and safety factor. The maximum von mises stress is 1603.72 MPa and maximum displacement is 2.00385 mm. Reaction forces and moments on the constrained areas are also reported.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 16

    Stress Analysis Report

    Analyzed File: Revisi BendingV2.iam


    Autodesk Inventor Version: 2017 (Build 210142000, 142)
    Creation Date: 07/06/2022, 2:05
    Study Author: Lenovo
    Summary:

    Project Info (iProperties)

    Summary
    Author Lenovo

    Project
    Part Number Revisi BendingV2
    Designer Lenovo

    Status
    Design Status WorkInProgress

    Physical
    Mass 2,70376 kg
    Area 2209410 mm^2
    Volume 2481280 mm^3
    x=-1136,09 mm
    Center of Gravity y=-708,243 mm
    z=50,0058 mm

    Note: Physical values could be different from Physical values used by FEA reported below.

    Static Analysis:1
    General objective and settings:
    Design Objective Single Point
    Study Type Static Analysis
    Last Modification Date 07/06/2022, 1:56
    Detect and Eliminate Rigid Body Modes No
    Separate Stresses Across Contact Surfaces No
    Motion Loads Analysis No

    Mesh settings:
    Avg. Element Size (fraction of model diameter) 0,1
    Min. Element Size (fraction of avg. size) 0,2
    Grading Factor 1,5
    Max. Turn Angle 60 deg
    Create Curved Mesh Elements No
    Use part based measure for Assembly mesh Yes

    Material(s)
    Name Aluminum 6061
    Mass Density 2,7 g/cm^3
    General Yield Strength 275 MPa
    Ultimate Tensile Strength 310 MPa
    Young's Modulus 68,9 GPa
    Stress Poisson's Ratio 0,33 ul
    Shear Modulus 25,9023 GPa
    Hollow panjang BGT 2
    Hollow panjang BGT
    Hollow Depan Tengah
    Hollow Tengah
    Hollow Tengah
    Hollow pendek BGT
    Hollow pendek BGT
    hollow seterr 40x20
    hollow seterr 40x20
    Penyangga Knuckle 40x20
    Penyangga Knuckle 40x20
    sterr 40x20
    Part Name(s) sterr 40x20
    penghubung ke ban 40x20
    penghubung ke ban 40x20
    Bushing Hollow Belakang 40x20
    Bushing Hollow Belakang 40x20
    Bushing Hollow Belakang 40x20
    Bushing Hollow Belakang 40x20
    Alas Arrm 40x20
    Alas Arrm 40x20
    Penghubung Hollow Depan 40x20
    Hollow Depan Bolong 40x20
    Arm Belakang Kanan
    Arm Belakang kiri 40x20
    rumah Bearing KANAN
    rumah Bearing KANAN
    besi knuckle
    besi knuckle
    Miring Arm Kanan
    Miring Arm Kanan
    Alas Rollbar Panjang
    Alas Rollbar Panjang
    Bushing Hollow Belakang 40x20
    Bushing Hollow Belakang 40x20
    Bushing Hollow Belakang 40x20
    Bushing Hollow Belakang 40x20
    Penahan Rollbar kecil
    Penahan Rollbar kecil
    Penahan Rollbar
    Penahan Rollbar
    roll bar analisis bending
    Hollow Tengah Bolong
    Hollow Tengah Bolong
    Name Steel, Mild
    Mass Density 7,85 g/cm^3
    General Yield Strength 207 MPa
    Ultimate Tensile Strength 345 MPa
    Young's Modulus 220 GPa
    Stress Poisson's Ratio 0,275 ul
    Shear Modulus 86,2745 GPa
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    Rod End bearinng Male
    Rod End bearinng Male
    Rod End bearinng Male
    Rod End bearinng Male
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    Part Name(s)
    BS 290 SKF- with one low-friction seal SKF 6001-RZ
    AS 1112 (2) - Metric M10 Type 5
    AS 1112 (2) - Metric M10 Type 5
    AS 1112 (2) - Metric M10 Type 5
    AS 1112 (2) - Metric M10 Type 5
    AS 1112 (2) - Metric M10 Type 5
    AS 1112 (2) - Metric M10 Type 5
    AS 1112 (2) - Metric M8 Type 5
    AS 1112 (2) - Metric M8 Type 5
    AS 1112 (2) - Metric M8 Type 5
    AS 1112 (2) - Metric M8 Type 5
    Name Steel AISI 4340 242 HR
    Mass Density 7,85 g/cm^3
    General Yield Strength 634 MPa
    Ultimate Tensile Strength 826 MPa
    Young's Modulus 207 GPa
    Stress Poisson's Ratio 0,33 ul
    Shear Modulus 77,8195 GPa
    Flange pitung V3
    as pitung 2
    baut
    Part Name(s)
    as pitung V3
    AS
    AS

    Operating conditions

    Force:1
    Load Type Force
    Magnitude 260,000 N
    Vector X -0,000 N
    Vector Y -0,000 N
    Vector Z -260,000 N

    Selected Face(s)
    Force:2
    Load Type Force
    Magnitude 700,000 N
    Vector X 0,000 N
    Vector Y -0,000 N
    Vector Z -700,000 N

    Selected Face(s)
    Force:3
    Load Type Force
    Magnitude 300,000 N
    Vector X 0,000 N
    Vector Y -0,000 N
    Vector Z -300,000 N

    Selected Face(s)
    Pin Constraint:1
    Constraint Type Pin Constraint
    Fix Radial Direction Yes
    Fix Axial Direction Yes
    Fix Tangential Direction No

    Selected Face(s)
    Pin Constraint:2
    Constraint Type Pin Constraint
    Fix Radial Direction No
    Fix Axial Direction Yes
    Fix Tangential Direction No

    Selected Face(s)
    Pin Constraint:3
    Constraint Type Pin Constraint
    Fix Radial Direction Yes
    Fix Axial Direction Yes
    Fix Tangential Direction No

    Selected Face(s)
    Frictionless Constraint:1
    Constraint Type Frictionless Constraint

    Selected Face(s)
    Results

    Reaction Force and Moment on Constraints


    Reaction Force Reaction Moment
    Constraint Name
    Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)
    -0,78751 N -0,00346423 N m
    Pin Constraint:1 674,753 N -69,3531 N 0,406379 N m 0,169645 N m
    671,179 N 0,36926 N m
    0,00334649 N 0,00000421401 N m
    Pin Constraint:2 0,00335468 N -0,000182335 N 0,000247736 N m 0,000243165 N m
    -0,000147189 N 0,0000471827 N m
    0,824272 N 0,00150543 N m
    Pin Constraint:3 592,823 N 69,0518 N 0,377197 N m -0,232565 N m
    588,787 N 0,296966 N m
    -0,00133725 N -0,000169686 N m
    Frictionless Constraint:1 0,423997 N 0,000171043 N m
    0,000558961 N 0,000021278 N m
    0,423995 N 0,00000309037 N m

    Result Summary
    Name Minimum Maximum
    Volume 2481350 mm^3
    Mass 7,33818 kg
    Von Mises Stress 0,00000221873 MPa 1603,72 MPa
    1st Principal Stress -539,865 MPa 1919,28 MPa
    3rd Principal Stress -1412,29 MPa 666,058 MPa
    Displacement 0,0000000359462 mm 2,00385 mm
    Safety Factor 0,129075 ul 15 ul

    Figures

    Von Mises Stress

    1st Principal Stress


    3rd Principal Stress
    Displacement
    Safety Factor
    C:\CADD\Si Pitung Bending\Revisi BendingV2.iam

    You might also like