Catalogo Display Optic
Catalogo Display Optic
Catalogo Display Optic
Display/Optic
G ENERAL INFORMATION
Sales and deliveries are subject to the OSRAM terms References for control gear and igniters are available
of supply and payment valid on the day the sales on request.
agreement is concluded.
Operational data and dimensions are subject to the Generally speaking, Display/Optic lamps may only be
usual slight tolerances. operated in casings that prevent exposure to UV light
OSRAM reserves the right to make technical modifi- and prevent glass shards escaping.
cations without notice.
All supplies are subject to availability. With the exception of the XBO® product family, all
discharge lamps contain small quantities of materials
® = Registered trademark (such as mercury) which are harmful to the environ-
Lamps are design rated wattage in accordance ment. In Europe they must therefore be disposed of
with ANSI standard 78.370-1982 (As Amended) appropriately under EEC Code 06 04 04* (Waste con-
taining mercury) or 20 01 21* (Fluorescent tubes and
The use of any ballasts other than those which have other waste containing mercury). In other countries,
been approved or declared suitable will invalidate the relevant national regulations must be observed.
warranty.
Notes on CE labelling: confirming that their agencies. The CE label 4. The CE label is not a
products comply with the indicates to these agen- seal of quality or an
1. CE labelling as a “basic requirements” of cies that the labelled approval mark
requirement for marketing special European guide- product complies with
products lines and that they meet European law at the time CE labelling relates solely
the stated objectives of of its marketing. to compliance with the
From January 1st 1996, the guidelines (electro- statutory “basic require-
manufacturers and import- magnetic compatibility, 3. Neither retailers nor ments” contained in cer-
ers are obliged and are for example). consumers have the right tain guidelines. In no way
responsible for marking to inspect the conformity therefore is it an indicator
products subject to the As a rule, these “basic certificates of the manu- of the quality of the prod-
EMC regulations with the requirements” are met if facturers uct. As an administrative
CE label either directly on the products were manu- label required by law and
the product or on its factured in compliance The right to request and of no value to consumers
packaging or on accom- with the relevant harmo- inspect conformity certifi- or users, the CE label
panying documentation. nised European stand- cates is reserved exclu- should not be confused
The CE label is a require- ards. sively for those market with the approval marks
ment for sales within the inspection agencies re- (such as ENEC and BEAB
EU and must therefore be 2. The CE label is an sponsible for checking marks) issued by inde-
applied before a product administrative mark that electrical/electronic pendent inspectorates.
can be marketed. By products comply with These inspectorates do
applying the CE label to The CE label is an admin- statutory safety require- not even check whether
their products, manufac- istrative mark addressed ments. or not a product carries
turers and importers are to the national inspection the CE label legitimately.
Any manipulation of our products or packaging, including but not limited to modification, reworking or
restamping, is prohibited and infringes our registered trademark rights. Such modifications may impair
the technical properties of our products, destroy them or cause consequential damage or injury, for which
OSRAM cannot under any circumstances be held responsible.
For more information on our products go to: Printed on paper treated with
www.osram.de chlorine-free bleach.
www.osram.com Printed in Germany.
Subject to change without notice. Errors and omission excepted.
Contents
See the world in a new light 4/5
What you need to know about Display/Optic lamps 6/7
HMI® and HMP® metal halide lamps 8 – 10
HTI® and SharXS® HTI® metal halide lamps 11 – 14
HSR® and HSD® metal halide lamps 15/16
VIP® metal halide lamps 17
XBO® xenon short arc lamps 18 – 26
HBO® mercury short arc lamps 27/28
HBO® mercury short arc lamps for microlithography 29 – 34
HXP® mercury short arc lamps, long-life with elliptical reflector 35
Tungsten halogen lamps, low voltage without reflector 36/37
Tungsten halogen lamps, current controlled 38 – 40
Reflector lamps with dichroic coating 41
Tungsten halogen lamps with reflector MR 11, MR 13, MR 16, MR 18 42 – 44
Mains voltage halogen lamps, 3400 K 45/46
Mains voltage halogen lamps, 3200 K 47 – 50
Mains voltage halogen lamps, 3000 K 51
Mains voltage halogen lamps, 2900 K 52
STUDIOLINE® 53
HPL® High performance halogen lamps 54
PAR 64 Halogen lamps 55
Lamps without halogen low voltage 56
Spectral lamps 57
Lamps for scientific purposes 58
LINEX® 59
Overview of bases 60 – 62
Burning positions 63
Glossary of the most important lighting terms 64 – 67
Index of types, Index of ANSI code, Index LIF code 68 – 72
OSRAM worldwide 73/74
OSRAM Classic OSRAM DECOSTAR® OSRAM DULUX® EL OSRAM LUMILUX® T5 OSRAM POWERBALL® OSRAM ULTRA-
LONGLIFE E27 HCI®-TC VITALUX®
4
Light for technology
OSRAM World:
• 57 companies and
sales offices for
99 countries
OSRAM OSRAM XBO® OSRAM XBO® OSRAM HBO® OSRAM HBO®-IC OSRAM HMI®
Halogen lamps Reflectorized lamps Projection lamps Reflectorized lamps for Lithographie Metal halide lamps
5
Setting the pace
in lighting design
Versatile technology for a wide range
of applications
In addition to the normal, everyday require-
ments for lighting, there are a large number
of applications for artificial light which
require a special purpose source of light or
radiation. The Display/Optic division of
OSRAM has to provide a range of lamps
to best meet a diversity of requirements in
many different fields of application. In
doing so, it makes use of a wide range of
technical options for generating light –
from simple yet high-precision incandes-
cent lamps and modern halogen lamps,
some using XENOPHOT® technology, to
xenon and mercury-vapour discharge
lamps and metal halide lamps.
6
SharXS® HTI® short-arc lamps
provide excellent light and
efficiency for creative effects.
6000 °C in an info@sharxs.de
HMI® arc. www.sharxs.de
Micrographic
chip structure.
Application-driven design
The range of applications for
lamps from our Display/Optic
division encompasses diverse
and contrasting areas such as
amateur photography, com-
mercial film projection, micro-
chip fabrication, show busi-
ness, medical applications,
solar simulation and much
more. Even if the basic lamp
technologies remain the same and are cal output, colour temperature, lamp life,
used in all areas of application, there are luminance and colour rendering. In every
obvious and often dramatic differences in case, however, the design is always the one
the way the lamps are designed to produce best suited to the particular application.
various lamp characteristics such as electri-
7
HMI®
Metal halide lamps
d
l
a
d
1
d
d
l
l
a
a
d
l
a
l
l
a
a
32 43 54 5
6 6
7 7
Product Product
reference number
Product
reference
= Square-wave AC W = Watt
~ = Sine-wave AC SE = Single ended
XS = eXtreme Seal (max. permissible foil temperature 450 °C)
8
HMI®
Metal halide lamps
d d
l2 l2
1 l1 4 l1
d d
l2
2 l1 5 l1
l2
3 l1
Product Product
reference number
Product
reference
Safety: Literature:
Because HMI® lamps emit UV radiation and operate Further information can be found in the following bro-
at overpressure those lamps (including the versions chures, obtainable on request from OSRAM:
with an outer bulb) must be operated only in appro- • “Technology and applications/Metal halide lamps”
priate fully enclosed luminaires. Suitable filters should • “Guidelines for control gear and igniters for metal
be used to ensure that the UV radiation is reduced to halide lamps”
an acceptable level. • “Availability of control gear and igniters”
• “Rome. 8 pm. Overcast. No problem. HMI lamps”
9
HMP®
Metal halide lamps
l
a
d d
a a
1 l 2 l 3
Product Product
reference number
Product
reference
10
HTI®
Metal halide lamps
a
a
l
a
l
a a
16 21 37 42 l 53 l
a a
64 75 l
l
Product Product
reference number
Product
reference
HTI® are metal halide lamps similar to HMI® lamps but Applications:
use short-arc technology. Because of their high luminance and high luminous
efficacy, HTI® lamps are primarily employed in lighting
Their main characteristics and advantages are as follows: systems with optical paths.
• Short arc • Effect spotlights/entertainment
• Daylight character • Effect and slide projectors
• Compact dimensions • Optical waveguide (endoscopy/boroscopy)
• High luminance
• High luminous efficacy
• Choke or ECG operation
1) Special GY22 base. The ignition voltage may be applied only to the thin pin 4) Depending on the switching cycle, reflector and control gear
2) Supplied on request 5) Current strap underneath
3) Important: The contact pins of the base are short-circuited; the electrode furthest 6) To be discontinued
from the base is connected via cable
11
SharXS® HTI®
Metal halide lamps
l
a
Product Product
reference number
SharXS HTI 200 W/D3/70 4050300854311 200 3/25 60/– 3.3 SFc10-4 13000 30000
SharXS HTI 400 W/D3/75 4050300854502 400 3/25 49/– 8.5 SFc10-4 26000 55000
SharXS HTI 575 W/D4/75 4050300854298 575 3/25 90/95 6.4/7.0 SFc10-4 46000 49000
SharXS HTI 700 W/D4/75 4050300861876 700 3/25 70/73 10.0/11.0 SFc10-4 59000 60000
SharXS HTI 700 W/D4/60 4050300854465 700 3/25 70/73 10.0/11.0 SFc10-4 59000 60000
SharXS HTI 1200 W/D7/60 4050300854595 1200 5/35 95/100 12.7/13.8 SFc10-4 110000 41000
SharXS HTI 1200 W/D7/751) 1200 5/35 95/100 12.7/13.8 SFc10-4 110000 41000
Product
reference
SharXS HTI 200 W/D3/70 7000 > 85 3000 135 15 57.5 3 Universal
SharXS HTI 400 W/D3/75 7500 > 80 750 135 18 57.5 3 Universal
SharXS HTI 575 W/D4/75 7500 > 80 750 135 18 57.5 4 Universal
SharXS HTI 700 W/D4/75 7500 > 80 750 135 21 57.5 4 Universal
SharXS HTI 700 W/D4/60 6000 > 80 750 135 18 57.5 4 Universal
SharXS HTI 1200 W/D7/60 6000 > 90 750 135 21 57.5 7 Universal
SharXS HTI 1200 W/D7/751) 7500 > 80 750 135 21 57.5 7 Universal
info@sharxs.de
www.sharxs.de
12
HTI®
Metal halide lamps
d
a
1 l 3
3 a d
I
d d a
a
2 l 4
4 l
Product Product
reference number
HTI® double-ended
HTI 300 W/DX 4050300370651 300 100 3.6 ~ SFc10-4 22000 20000 6500
HTI 300 W/DEL 4050300651248 300 85 4~ SFc10-4 20000 18000 5700
HTI 575 W/DE XS 4050300946122 575 90 7.4 ~ SFc11-4 45000 30000 5600
HTI 2500 W/DEL 4050300596709 2500 115 26 ~ Special 270000 30000 6000
HTI 4000 W/DE 4050300519845 4000 115 40 ~ S25.5 360000 35000 6300
Product
reference
Safety:
Because HTI® lamps emit UV radiation and operate at
overpressure the following lamps must be operated
only in appropriate fully enclosed luminaires. Suitable
filters should be used to ensure that the UV radiation
is reduced to an acceptable level.
Literature:
Further information can be found in the following bro-
chures, obtainable on request from OSRAM:
• “Technology and applications/Metal halide lamps”
• “Guidelines for control gear and igniters for metal
halide lamps”
• “Availability of control gear and igniters”
• “Staying cool when things hot up”, HTI lamps with
eXtreme Seal technology
13
HTI®
Metal halide lamps
d
d
1 l a 2 l a
Product Product
reference number
= Square-wave AC
14
HSR®
Metal halide lamps
d
d
a a
1 l 2 l
Product Product
reference number
Product
reference
HSR 400/60 5 1000 110 23 62 any 1
HSR 575/60 7 1000 125 30 65 any 1
HSR 575/72 7 1000 125 30 65 any 1
HSR 700/60 8 1000 155 30 75 any 2
HSR 1200/60 10 1000 175 40 85 any 2
~ = Sine-wave AC
15
HSD®
Metal halide lamps
d
a a
1 l 2 l
Product Product
reference number
Product
reference
HSD 150/70 5 30001) 105 20 56 any 1
HSD 200/60 5 2000 108 23 55 any 2
HSD 250/60 5 2000 108 23 55 any 2
HSD 250/78 5 3000 108 23 55 any 2
HSD 250/80 5 3000 108 23 55 any 2
HSD 575/60 7 3000 135 30 65 any 2
HSD 575/72 7 3000 135 30 65 any 2
~ = Sine-wave AC
Safety:
Because HSD® and HSR® lamps emit UV radiation and
operate at overpressure the lamps must be operated
only in appropriate fully enclosed luminaires. Suitable
filters should be used to ensure that the UV radiation
is reduced to an acceptable level.
Literature:
Further information can be found in the following
brochures, obtainable on request from OSRAM:
• “Technology and applications/Metal halide lamps”
• “Guidelines for control gear and igniters for metal
halide lamps”
• “Availability of control gear and igniters”
• “The perfect stage for your creativity”, Metal halide
lamps for architainment: HSR® and HSD®
M on
D-RO
o u r f ree C ing”:
y ht de
Order ecture lig fo.osram.
it in
“Arch ail: RGB@ 13 3404
m 2
by e- (+49 89) 6
fa x :
by
1) If operated on ECG. 2000 h if operated on choke Photo: A & O-Lighting: Arag Tower, Martin Professional: Chicago Bridge
16
VIP®
Metal halide lamps
1 l a
Product Product
reference number
1)
Product
reference
VIP® lamps are halogen discharge lamps that meet the adapted to the colour filter curves of the projectors
particular requirements of multimedia data and video and their service life optimised for maximum lumin-
projection thanks to their extremely short arcs and ance and luminous efficacy. These benefits make them
long life. ideal light sources for professional projection applica-
tions, light guide systems and effect special lighting.
Their main characteristics and advantages are as
follows: Special versions for OEMs are supplied on request as
• Short arc P-generation OSRAM VIP® lamps.These P-VIP® lamps
• Very high luminance are high-pressure mercury lamps. Thanks to their spe-
• Long life cific filling parameters and very short electrode gaps,
• High luminous efficacy they achieve very high luminance values and very
• Tailor-made colour spectrum small spreads. Typical lamp parameters are luminance
• Optimised reflector configuration of over 200 kCd/cm2 at 120 W and electrode gaps of
• ECG operation 1.0 mm.
P-VIP® lamps are available with parabolic or elliptical
VIP® lamps from OSRAM are used in light valve pro- reflectors with optimised contours for front and rear
jectors (video projectors) based on LCD, LCoS or projection based on LCD, LCoS or DLPTM light valve
DLPTM technology. Their spectral distribution has been technology.
1) Guideline value
17
XBO®
Xenon short arc lamps
d
d
l1
l2
l2
a
3 l1 d
1 d
d
l2
l1
l2
l1
d
a
a
l2
d
l1
l2
5 6 7 l1
l2
2 4 l1
1)
Product Product
reference number
XBO 75 W/22) 4050300508801 75 14 5.4 1000 100 40000 400 400 s105 – –
XBO 100 W OFR 4050300508429 100 14 7.2 1900 270 31000 500 500 s105 – requ.
XBO R 100 W/45 OFR3)4) 4050300317205 100 13 7.2 – – – – 500 p15 – –
XBO 150 W/12)5) 4050300015804 150 20 7.5 3000 300 15000 1200 – s15 – requ.
XBO 150 W/CR OFR 4050300508788 150 17.5 8.5 2900 290 20000 3000 1200 s15 p15 requ. requ.
XBO 150 W/S 4050300220208 150 20 7.5 2200 220 18000 1000 800 s15 p15 requ. requ.
XBO R 180 W/45 OFR3)4) 4050300432175 180 14 12 – – – – 500 p15 – –
XBO R 300 W/60 C OFR6) 4050300611129 300 17.5 17.1 – – – – 500 p15 – –
7)
Product
reference
Literature:
Further information can be found in the following
brochures, obtainable on request from OSRAM:
• “Ready for your ideas!” Specialty lamps for innova-
tive applications in medicine and industry
1) For vertical burning position: anode (+) on top 4) The focus lies 45 mm in front of the mounting rim on the lamp axis
2) Also available in ozone-free version with the same data: XBO 75 W/2 OFR, (working distance)
XBO 150 W/1 OFR 5) Also available in Suprasil quartz version: XBO 150 W/4
3) Lamp also available with connecting cable and plug contact. 6) The focus lies 60 mm in front of the mounting rim on the lamp axis
Product reference XBO R 100 W/45 C or XBO R 180 W/45 C (working distance)
7) Distance from end of base to tip of electrode (cold)
18
XBO®
Xenon short arc lamps
d
d
l2
l1
l1
a
a
1 2
1)
Product Product
reference number
4)
Product
reference
Applications:
• Classic film projection
• Digital film and video projection
• Architecture lighting and effect lighting (“light finger”)
• Solar simulation
19
XBO®
Xenon short arc lamps
d
d d
l2
l1
d
l2
l1
l2
l1
l2
l1
a
a
a
a
1 2 3 5
4
1) 1) 1) 2)
Product Product
reference number
XBO 500 W/H OFR 4050300218526 500 17 28 14500 1450 40000 17...30 2000 2000 s30 p30
XBO 500 W/RC OFR 4050300444031 420 14 30 13000 1800 26000 20...30 400 200 s120
XBO 550 W/HTC OFR 4050300389073 550 22 25 16000 1600 34000 17...27 600 600 s15 p15
XBO 700 W/HSC OFR 4050300219622 700 18 37 20000 2000 40000 30...45 1500 1500 s20 p20
3)
Product
reference
XBO 500 W/H OFR requ. requ. requ. 0.9x2.5 35 190 165 75 SFa16-8 SFa15-10 1
XBO 500 W/RC OFR – requ. requ. 0.7x0.8 25 139 134 65 Cable SFa21-5 2
XBO 550 W/HTC OFR – requ. requ. 0.9x3.1 25 143 129 65 Cable SFc15-6 3
XBO 700 W/HSC OFR – requ. requ. 1.1x2.9 40 236 222 95 SK27/50 SFcX27-8 4
C = Cable S = Short
H = Suitable for horizontal burning position TC = Thread, cable
OFR = Ozone free W = Watt
R = Ruggedized version requ. = Required
A lighting installation
with XBO® 3 and 4 kW.
These lamps shower
the facades in eye-
catching colours from
spotlights mounted
on the roof of the
200 meter high Bogotá
Tower in Colombia.
20
XBO®
Xenon short arc lamps
d
d
l2
l1
l2
l1
d d
l2
l1
l2
l1
a
a
a
a
1 2 3 14
1) 1) 1) 2)
Product Product
reference number
XBO 900 W OFR 4050300213378 900 19 45 30000 3000 50000 30...53 2400 – s30
XBO 1000 W/HS OFR 4050300217673 1000 19 50 32000 3000 60000 30...55 2000 2000 s20 p20
XBO 1000 W/HSC OFR 4050300219646 1000 19 50 32000 3000 60000 30...55 2000 2000 s20 p20
XBO 1000 W/HTP OFR 4050300219011 1000 21 45 35000 3200 45000 30...55 2400 2400 s30 p30
3)
Product
reference
21
XBO®
Xenon short arc lamps
d
d
l2
l1
l2
l1
d d
l2
l1
l2
l1
a
a
a
12 32 43 54
1) 1) 1) 2)
Product Product
reference number
XBO 1600 W/HS OFR 4050300217697 1550 23 65 70000 5500 70000 50...70 2000 2000 s20 p20
XBO 1600 W/HSC OFR 4050300220024 1550 23 65 60000 5500 70000 50...70 2000 2000 s20 p20
XBO 1600 W OFR 4050300308012 1600 24 65 60000 6000 65000 45...75 2400 – s30
XBO 1600 W/CA OFR 4050300227306 1600 24 65 60000 6000 65000 45...75 2400 – s30
3)
Product
reference
XBO 1600 W/HS OFR – requ. requ. 1.0x3.2 46 235 205 95 SFa27-11 SFcX27-8 1
XBO 1600 W/HSC OFR – requ. requ. 1.0x3.2 47 236 222 95 SK27/50 SFcX27-8 2
XBO 1600 W OFR – – – 1.4x4.0 52 370 322 142.5 SFa27-10 SFa27-12 3
XBO 1600 W/CA OFR – – – 1.4x4.0 52 370 322 143 SFaX27-10 SFa27-12 4
C = Cable S = Short
CA = Cable on anode base TP = Threaded pin
H = Suitable for horizontal burning position W = Watt
OFR = Ozone free requ. = Required
22
XBO®
Xenon short arc lamps
d
d d d d
l2
l1
d
l2
l1
l2
l1
l2
l1
l1
l2
l2
l1
a
a
a
a
a
55
11 2 3 4 66
1) 1) 1) 2)
Product Product
reference number
XBO 2000 W/H OFR 4050300217710 2000 27 70 80000 7500 75000 50...85 2400 2400 s30 p30
XBO 2000 W/HS OFR 4050300274430 2000 24 80 80000 7500 80000 50...85 2400 2400 s30 p30
XBO 2000 W/HTP OFR3) 4050300274348 2000 28 70 80000 7500 75000 50...85 2400 2400 s30 p30
XBO 2000 W/HTT OFR 4050300300818 2000 24 80 80000 7500 75000 50...85 2400 2400 s30 p30
XBO 2000 W/SHSC OFR4) 4050300298870 2000 27 70 80000 7500 80000 50...85 2000 2000 s20 p20
XBO 2500 W OFR 4050300213699 2500 29 83 100000 9500 61000 60...95 2000 – s30
5)
Product
reference
XBO 2000 W/H OFR requ. – – 1.3x4.8 52 370 322 142.5 SFaX27-10 SFaX27-12 1
XBO 2000 W/HS OFR – requ. requ. 1.3x4.0 60 342 302 145 SFaX27-9.5 SFa27-7.9 2
XBO 2000 W/HTP OFR3) requ. – – 1.3x4.8 52 375 322 142.5 SFa25-14 SFc25-14 3
XBO 2000 W/HTT OFR requ. – – 1.3x4.8 52 370 322 142.5 SFcX25-10 SFcX25-10 4
XBO 2000 W/SHSC OFR4) – requ. requ. 1.3x4.0 46 236 222 95 SK27/50 SFcX27-8 5
XBO 2500 W OFR – – – 1.5x6.0 60 428 382 167.5 SFaX27-13 SFaX27-14 6
23
XBO®
Xenon short arc lamps
d d
d
l2
l1
l2
l1
l2
l1
a
a
a
1 2 3
1) 1) 1) 2)
Product Product
reference number
XBO 2500 W/HTP OFR 2500 28 90 100000 9500 60000 70...100 1500 1500 s30 p30
XBO 2500 W/HS OFR 4050300274324 2500 28 90 100000 10000 80000 70...100 1500 1500 s30 p30
XBO 3000 W/HTP OFR 4050300602219 3000 29 100 130000 12000 85000 60...110 1500 1500 s30 p30
XBO 3000 W/H OFR 4050300602196 3000 29 100 130000 12000 85000 60...110 1500 1500 s30 p30
XBO 3000 W/HS OFR 4050300582375 3000 29 100 130000 12000 90000 60...110 1500 1500 s30 p30
XBO 3000 W/HTC OFR 4050300602202 3000 29 100 130000 12000 85000 60...110 1500 1500 s30 p30
3)
Product
reference
XBO 2500 W/HTP OFR requ. requ. requ. 1.5x6.0 60 398 357 165 SFa27-14 SFc27-14 3
XBO 2500 W/HS OFR – requ. requ. 1.5x4.5 60 342 302 145 SFaX27-9.5 SFa27-7.9 1
XBO 3000 W/HTP OFR requ. requ. requ. 1.7x5.0 66 405 357 162.5 SFa27-14 SFc27-14 2
XBO 3000 W/H OFR requ. requ. requ. 1.7x5.0 66 428 382 167.5 SFaX27-13 SFaX27-14 1
XBO 3000 W/HS OFR – requ. requ. 1.7x5.0 60 342 302 145 SFaX27-9.5 SFa27-7.9 1
XBO 3000 W/HTC OFR requ. requ. requ. 1.7x5.0 66 398 350 165 SFc28-13 SFaX28-13 3
H = Suitable for horizontal burning position TP = Threaded pin
OFR = Ozone free S = Short
W = Watt requ. = Required
TC = Thread, cable
24
XBO®
Xenon short arc lamps
d d
d d d d
l2
l1
l1
l2
l1
l2
l1
l2
l2
l1
l2
l1
a
a
a
a
11 32 43 4
5 54 66
1) 1) 1) 2)
Product Product
reference number
XBO 3600 W/HTM OFR 4050300249230 3600 28 120 160000 16000 85000 80...130 1000 1000 s15 p15
XBO 3600 W/HTC OFR 4050300350585 3600 28 120 160000 16000 85000 80...130 1000 1000 s15 p15
XBO 4000 W/HS OFR 4050300274317 4000 29 135 155000 17000 90000 80...150 1000 1000 s20 p20
XBO 4000 W/HTP OFR 4050300274355 4000 30 130 155000 16000 90000 100...140 1000 1000 s20 p20
XBO 4000 W/HSA OFR 4050300636429 4000 29 135 160000 17000 105000 80...150 1000 1000 s20 p20
XBO 4200 W/CA OFR3) 4050300274379 4200 29 140 190000 20000 100000 80...160 1000 – s15
XBO 4200 W/GS OFR 4050300274454 4200 29 140 190000 20000 100000 80...160 500 – s15
XBO 4500 W/HS OFR 4050300665382 4500 32 135 190000 22000 105000 80...150 1000 1000 s15 p15
XBO 4500 W/HTP OFR 4050300665399 4500 32 135 190000 22000 105000 80...150 1000 1000 s15 p15
4)
Product
reference
XBO 3600 W/HTM OFR – requ. requ. 1.9x6.0 60 412 362 165 SFc28-13 SFc28-13 1
XBO 3600 W/HTC OFR – requ. requ. 1.9x6.0 60 412 362 165 SFa28-145) SFc28-13 1
XBO 4000 W/HS OFR – requ. requ. 1.9x6.0 70 410 370 171 SFaX30-9.5 SFa30-7.9 2
XBO 4000 W/HTP OFR – requ. requ. 1.9x6.0 70 433 382 167.5 SFa27-14 SFc27-14 3
XBO 4000 W/HSA OFR – requ. requ. 1.8x5.6 70 410 370 171 SFaX30-9.5 SFa30-7.9 2
XBO 4200 W/CA OFR3) – requ. – 2.1x5.7 70 428 382 167.5 SFaX27-13 SFaX27-14 2
XBO 4200 W/GS OFR – requ. – 2.1x5.7 60 428 382 167.5 SFaX27-13 SFaX27-14 4
XBO 4500 W/HS OFR requ. requ. requ. 1.9x6.0 70 410 370 171 SFaX30-9.5 SFa30-7.9 5
XBO 4500 W/HTP OFR requ. requ. requ. 1.9x6.0 70 433 382 165 SFa27-14 SFc27-14 6
1) Measured in vertical burning position at rated wattage 4) Distance from end of base to tip of electrode (cold)
2) With vertical burning position: anode (+) on top 5) Base with axial cable (560 mm)
3) Also available as XBO® 4200 W/GS with 60 mm bulb diameter and 500 h life
25
XBO®
Xenon short arc lamps
d
d
d
l2
l1
l1
l2
l2
l1
a
a
a
11
1 22 343
XBO 5000 W/H OFR requ. requ. requ. 2.2x6.5 70 433 382 167.5 SFaX30-16 SFa28-18 2
XBO 5000 W/HBM OFR requ. requ. requ. 2.2x6.5 70 436 393 170.5 SFaX30-9.5 SFa30-7.9 2
XBO 5000 W/HTP OFR requ. requ. requ. 2.2x6.5 70 433 382 165 SFa27-14 SFc27-14 3
XBO 6000 W/HS OFR requ. requ. requ. 2.0x7.5 78 433 393 170.5 SFaX30-9.5 SFa30-7.9 2
XBO 6000 W/HTP OFR requ. requ. requ. 2.0x7.5 78 433 384 165 SFa30-14 SFc30-14 3
XBO 6500 W – requ. requ. 2.3x9.0 60 483 434 200 SFa30-20 SFa30-22 1
XBO 7000 W/HS OFR requ. requ. requ. 2.6x10.0 78 433 393 170.5 SFaX30-9.5 SFa30-7.9 2
XBO 7000 W/HSH OFR requ. requ. requ. 2.6x7.5 78 433 393 170.5 SFaX30-9.5 SFa30-7.9 2
XBO 8000 W/HS OFR requ. requ. requ. 2.3x10.5 90 433 393 170.5 SFaX30-9.5 SFa30-7.9 2
XBO 10000 W/HS OFR requ. requ. requ. 2.3x12.0 90 433 393 170.5 SFa30-9.5 SFa30-7.9 2
XBO 12000 W OFR requ. requ. requ. 2.6x14.0 90 483 434 200 SFaX30-9.5 SFa39-15/110 2
Safety:
Because of their high luminance, UV radiation and protective jackets supplied when handling XBO® lamps.
internal pressure in both the hot and cold state, XBO® When handling the lamps without their protective
lamps may only be operated in enclosed lamp casings jackets, always wear safety goggles, a face mask
specially constructed for the purpose. Always use the and gloves with wrist protectors.
26
HBO®
Mercury short arc lamps
d d
l2
l1
l2
l1
l2
l1
l2
a
1 2 3 4 l1
Product Product
reference number
2)
Product
reference
AC = Alternating current
DC = Direct current
HBO® are short arc lamps in which the discharge arc Literature:
burns in an atmosphere of mercury vapour at high Further information can be found in the following
pressure. brochure, obtainable on request from OSRAM:
• “Ready for your ideas!” Specialty lamps for inno-
Their main characteristics and advantages are as vative applications in medicine and industry
follows:
• High radiance
• Multi-line spectrum
• High radiant power in the UV and the visible range
• AC or DC operation
Applications:
Lamps rated at less than 200 W are predominantly
used in scientific and technical applications such as:
• Fluorescence microscopy
• Fluorescence endoscopy
• Light guide applications
• Schlieren photography
• Hologram projection
• UV curing
27
HBO®
Mercury short arc lamps
l2
l1
a
Product Product
reference number
4)
Product
reference
HBO 200 W/21)2) 0.6x2.2 400/2005) s20 17 128 102 40 SFc10-41) SFc10-41)
HBO 200 W/DC 0.75x2.3 1000 s15 17 128 102 40 SFc10-4/15 SFc10-4/15
HBO 200 W/43) 0.6x2.2 200 s20 17 128 102 40 SFc10-4 SFc10-4
HBO 500 W/2 1.1x4.1 400/2005) s20 26.5 170 142 65.5 SFc13-4 SFc13-4
AC = Alternating current
DC = Direct current
1) HBO 200 W/2 and 500 W/2 can be operated on AC or DC 4) Distance from end of base to tip of anode (cold)
2) Also available with threaded pin 8-32 UNC-3A 5) Reduced life if operated on AC
3) Lamp also available with increased radiation in the wavelength range below
450 nm for UV-curing. Ref. HBO 202 W/4
28
HBO® Mercury short arc lamps
for microlithography
a
d d
d
l2
l1
l2
l1
d
a
l2
l1
l2
l1
a
1 2 3
Product Product
reference number
2)
Product
reference
DC = Direct current
1) Lamp suitable for pulsed operation between 250 W and 500 W 4) With 8-32 UNC-3 A thread
Maximum permissible power is 350 W for constant power operation 5) With M5 x 0.9 thread
2) Distance from end of base to tip of anode or cathode (cold) 6) Anode: SXFc13-5/20 hexagon base with M5 x 0.9 thread
3) Anode underneath Cathode: SXFc13-5/20 with M5 x 0.9 thread
29
HBO® Mercury short arc lamps
for microlithography
d
d
a
d
l1
l2
l2
l1
l2
l1
a
a
51 23 43
Product Product
reference number
HBO 1000 W/D 4050300288857 DC 1000 37.7 26.5 105 10800 1000 Convection
HBO 1000 W/CEL1) 4050300412627 DC 750 (700/1000) 2) 47 16 85 8300 2500 Convection
HBO 1002 W/CEL3) 4050300412634 DC 750 (700/1000) 2) 47 16 85 8300 2500 Convection
4)
Product
reference
DC = Direct current
1) Also available as HBO 1000 W/CL with 1500 h life. 4) Distance from end of base to tip of anode or cathode (cold)
(Obtainable in Europe, Singapore and Japan only through Canon) 5) Anode underneath
2) Lamp suitable for pulsed operation between 700 W and 1000 W 6) Sleeve base with M 6 threaded pin
Maximum permissible power is 750 W for constant power operation 7) Hexagon base with M 6 threaded pin
3) Also available as HBO 1002 W/CL with 1500 h life.
(Obtainable in Europe, Singapore and Japan only through Canon)
30
HBO® Mercury short arc lamps
for microlithography
360 max.
a
d
a
d
l2
l1
a
d
l2
l1
l2
l1
l2
l1
a
100
max.
1 2 3 4
Product Product
reference number
4)
Product
reference
HBO 1000 W/NEL Convection Vertical5) 28 190 168 84.5 3 SFaX14-5/216) SFa15-5/167) 1
HBO 1002 W/NEL Convection8) Vertical5) 28 190 168 78.5 3 SFc15-6/259) SFaX14-5/216) 2
HBO 1002 W/NIL Forced Vertical5) 29 187 168 78.5 3 SFcX15-6/2510) SFaX14-5/2111) 3
base cooling
HBO 1003 W/PI3) Forced Vertical5) 29 195 169.5 85 3 SFc15-6/2510) SFcX14-6/2512) 4
base cooling
DC = Direct current
1) Lamp suitable for pulsed operation between 700 W and 1000 W 7) Sleeve base without thread
Maximum permissible power is 750 W for constant power operation 8) Cooling fins on cathode base
2) I-line values in the 365 ± 2.5 nm range 9) Sleeve base with M 6 threaded pin
3) Also available as Longlife version HBO 1003 W/PIL with 1500 h life 10) With M 6 threaded pin
4) Distance from end of base to tip of anode or cathode (cold) 11) Sleeve base with cable connection (M 5)
5) Anode underneath 12) With cooling fins
6) Sleeve base with cooling fins and cable connection (M 5)
31
HBO® Mercury short arc lamps
for microlithography
a
d
d d
l2
l1
l2
l1
l2
l1
a
a
2 3
1
1)
Product Product
reference number
HBO 1500 W/PI2) 4050300357720 DC 1500 23 65.2 4850 8502) Forced base cooling Vertical3)
HBO 1500 W/CIL 4050300461434 DC 1500 23 65.2 4850 1500 Forced base cooling Vertical3)
HBO 2001 W/NIL 4050300461489 DC 1750 26 67 5500 1500 Forced base cooling Vertical3)
4)
Product
reference
DC = Direct current
1) Maximum permissible base temperature: 200 °C 5) Cooling fins with cable connection (M 8)
2) Also available as Longlife version HBO 1500 W/PIL with 1500 h life 6) With cable connection (M 8)
3) Anode underneath 7) With cable connection (M 10)
4) Distance from end of base to tip of anode or cathode (cold)
32
HBO® Mercury short arc lamps
for microlithography
a
d d
l2
l1
d
d
l2
l1
l2
l1
l2
l1
l2
l1
a
a
a
1 2 3 4 5
1)
Product Product
reference number
HBO 2000 W/NIL 4050300490212 DC 1750 26 67 5200 1500 Forced base cooling
HBO 2001 W/CIL2) 4050300577296 DC 2000 26 77 6000 1500 Forced base cooling
HBO 2002 W/MA 4050300503714 DC 20003) 37 54 4200 10004) Forced base cooling
HBO 2002 W/NIL 4050300511276 DC 1750 26 67 5100 1500 Forced base cooling
HBO 2011 W/NIL 4050300947556 DC 2000 25 80 5700 1500 Forced base cooling
5)
Product
reference
HBO 2000 W/NIL Vertical6) 55 241 221 112 4.5 SFc27-7/357) SFc27-12/35 1
HBO 2001 W/CIL2) Vertical6) 62 329 309 149 4.5 SFa33.5-10/508) SF33.5/507) 2
HBO 2002 W/MA Vertical9) 62 292 272 138.5 3 SFa27-10/357) SF27/357) 3
HBO 2002 W/NIL Vertical6) 55 254 234 107.5 4.5 SFc27-10x1.25/35 SFc27-7/357) 4
HBO 2011 W/NIL Vertical6) 55 256 236 107.75 4.5 SFc27-12x1.5/35 SFc27-7/357) 5
DC = Direct current
33
HBO® Mercury short arc lamps
for microlithography
a
d
d d d
l2
l1
l2
l1
l2
l1
l2
l1
a
a
a
2 3 4
4
1
1)
Product Product
reference number
HBO 2500 W/PIL 4050300947396 DC 2500 28 90 8200 1500 Forced base cooling
HBO 2501 W/NIL 4050300520735 DC 2500 23 109 7800 1500 Forced base cooling
HBO 2510 W/NIL 4050300568959 DC 2500 23 109 7800 1500 Forced base cooling
HBO 3500 W/PI2) 4050300628226 DC 3400 23 148 9000 850 Forced base cooling
HBO 3501W/PI2) 4050300628325 DC 3400 23 148 9000 850 Forced base cooling
3)
Product
reference
HBO 2500 W/PIL Vertical4) 62 350 315 149 6.7 SFc30-6.5/50 SFc30-6/505) 2
HBO 2501 W/NIL Vertical6) 70 367 327 157.75 4.5 SFc33.5-14/50 SFa35.5-12/507) 1
HBO 2510 W/NIL Vertical4) 70 358 327 157.75 4.5 SF9c33.5-14/50 SFc33.5-12/507) 4
HBO 3500 W/PI2) Vertical4) 77 360 315 154 4.5 SFc32.5-6.7/50 SFaX40-6/505) 3
HBO 3501W/PI2) Vertical4) 77 360 315 154 4.5 SFc32.5-6.7/50 SFaX40-6/505) 3
DC = Direct current
Safety:
Because of their high luminance, UV radiation and Special safety precautions must be taken.
internal pressure, HBO® lamps may only be operated Detailed information is available on request.
in enclosed lamp casings specially constructed for
the purpose. Mercury is released if the lamp breaks.
Disposal: Literature:
HBO® discharge lamps contain small quantities of For further information on HBO® lamps and notes for
materials (such as mercury) which are harmful to the manufacturers of control gear, please refer to the follow-
environment. In Germany, they are classified as spe- ing publications, available on request from OSRAM:
cial waste (Code 35326 “Mercury, residue containing • “Specifications for power supply units for HBO®
mercury, mercury vapour lamps, fluorescent lamps, mercury short arc lamps”
fluorescent tubes”). In other countries the relevant • “Availability of power supply units and igniters”
national regulations must be followed. • “Mercury short arc lamps HBO® for microlithography,
Technology and Application”
1) Maximum permissible base temperature: 200 °C 5) With cooling fins and cable connection (M 10)
2) Also available as Longlife version HBO 1500 W/PIL with 1500 h life 6) Anode underneath
3) Distance from end of base to tip of anode or cathode (cold) 7) With cable connection (M 8)
4) Anode on top
34
HXP®
Mercury short arc lamps, long-life
d
d
11 l 2
a
1)
Product Product
reference number
1) Aperture lumens; typical initial value; for geometry of aperture see the respective 5) 5.0 x 3.8 mm2 aperture in distance a
footnote 6) Rectangular reflector rim 56 x 52 mm2
2) 5 mm diameter aperture in distance a 7) MATE-N-LOK is trademark of AMP Inc.
3) Horizontal ± 20°
4) Typically 9.5 W initial aperture radiation in the range 320 ... 500 nm through 5 mm
diameter aperture in distance a
35
Tungsten halogen lamps, low voltage
without reflector
d d d
a
l
l
a
a
1 2 3
Product Product
reference number
1) Available on request
36
Tungsten halogen lamps, low voltage
without reflector
d
d d d d
l
a
l
l
a
l
a
a
a
1 2 3 4 5
Product Product
reference number
Tungsten halogen lamps, low voltage, without reflector
HLX 64626 4050300006765 EHE A1/45 12 100 PG22 50 3600
64628 4050300017501 FDT A1/261 12 100 GY9.5 50 3000
HLX 64633 4050300006710 BRJ A1/234 15 150 G6.35 50 5600
64291 XIR 4050300888859 22.8 40 G6.35 800 1200
64668 XIR 4050300785042 22.8 80 G6.35 750 3050
64292 XIR 4008321023117 22.8 150 G6.35 600 6000
64650 4050300279473 22.8 50 G6.35 1300 1000
HLX 64638 4050300283050 24 100 G6.35 300 2900
HLX 64640 4050300006727 FCS A1/216 24 150 G6.35 50 6000
64647 4050300654904 24 120 G6.35 300 3600
HLX 64642 4050300012025 FDV M1/84 24 150 G6.35 300 5000
64643 4050300225920 FDS A1/262 24 150 GY9.5 100 5000
HLX 64654 4050300429694 24 250 GY9.5 300 9000
HLX 64655 4050300006734 EHJ A1/223 24 250 G6.35 50 10000
HLX 64656 4050300023120 FNT 24 275 G6.35 75 10000
HLX 64657 4050300012001 EVC M/33 24 250 G6.35 300 9000
HLX 64663 4050300006741 EVD A1/239 36 400 G6.35 50 16000
HLX 64664 4050300012537 36 400 G6.35 150 14500
HLX 64665 4050300026220 36 400 G6.35 300 12200
HLX 64669 4050300521688 GCD 50 590 GY9.5 50 21500
Product
reference
HLX 64626 s 90 11.5 48 18 4.2x2.3 30 1
64628 s 90 13 57 27 4.2x2.3 300 4
HLX 64633 s 90 11.5 44 30 4.8x3 40 2
64291 XIR h 90 12 44 30 3.9x1.4 40 5
64668 XIR h 90 14 44 30 2.2x5.5 40 5
64292 XIR s 90 14 44 30 2.8x6.7 40 5
64650 any 13 44 30 2.0x5.0 40 3
HLX 64638 any 13 50 30 5.3x2.6 40 2
HLX 64640 s 90 13.5 50 32 5.8x2.9 40 2
64647 any 13 44 30 2.3x6.4 100 3
HLX 64642 s 90 11.5 50 32 6x3.2 40 2
64643 s 90 15 57 33.5 6x3 30 4
HLX 64654 s 90 13.5 68 35 8x4 30 4
HLX 64655 s 90 13.5 55 33 7x3.5 40 2
HLX 64656 s 90 13.5 55 33 7x3.5 40 2
HLX 64657 s 90 13.5 55 33 8x4 40 2
HLX 64663 s 90 15 60 36 9.3x4.9 24 2
HLX 64664 s 105 18 57 36 10x51) 25 2
HLX 64665 s 90 18 60 36 10.5x5.3 25 2
HLX 64669 s 90 19 70 41.3 12.8x7.0 24 4
37
Tungsten halogen lamps
current controlled
d d d d d
l1
l1
l1
l1
l1
a
a
a
l2
l2
l2
l2
l2
2
1 2
3 53 64 5
5) 1)
Product Product
reference number
Tungsten halogen lamps, current controlled, single ended with PK30d base
64317 4050300442419 J1/76 6.6 45 male 1000 800
64317 IRC-LL-A 4008321012326 6.6 45 female 3000 800
64317 IRC-LL-B 6.6 45 female,round 3000 800
64317 IRC-LL-C 4050300785004 6.6 45 male 3000 800
64318 4050300258324 J1/77 6.6 45 female 1000 800
64318 Z 4050300258324 45 male 1000 800
64319 4050300440767 6.6 45 female 1000 800
64319 Z3) 4050300440729 45 male 1000 800
64319 IRC-LL-A 4008321012265 45 female 3000 800
64319 IRC-LL-C 4008321012289 45 male 3000 800
HLX 64328 4050300440804 6.6 65 female 1000 1450
HLX 64328 Z 4050300302362 6.6 65 male 1000 1450
HLX 64341 4050300446301 J1/79 6.6 100 female 1000 2700
HLX 64341 Z 4050300258348 6.6 100 male 1000 2700
HLX 64342 4050300308135 J1/80 6.6 100 male 1000 2700
HLX 64361 4050300271866 J1/83 6.6 150 female 1000 3600
HLX 64361 Z 4050300431642 6.6 150 male 1000 3600
HLX 64382 4050300431680 J1/84 6.6 200 male 1000 4800
2)
Product
reference
64317 s 90 13.5 max. 37 max. 21 16 1.4x3.6 100 1
64317 IRC-LL-A 13.5 max. 37 max. 21 16 1.4x3.6 100 5
64317 IRC-LL-B 13.5 max. 37 max. 21 16 1.4x3.6 100 5
64317 IRC-LL-C s 90 13.5 max. 37 max. 21 16 1.4x3.6 100 5
64318 s 90 13.5 max. 28 min. 27 16 1.4x3.6 100 2
64318 Z 13.5 max. 28 min. 27 16 1.4x3.6 100 2
64319 s 90 13.5 max. 32 min. 23 20 1.4x3.6 100 2
64319 Z3) 13.5 max. 32 min. 23 20 1.4x3.6 100 2
64319 IRC-LL-A 13.5 max. 32 min. 23 20 1.4x3.6 100 5
64319 IRC-LL-C 13.5 max. 32 min. 23 20 1.4x3.6 100 5
HLX 64328 s 904) 13.5 max. 32 min. 21 20 3.3x3.2 100 3
HLX 64328 Z s 904) 13.5 max. 32 min. 21 20 3.3x3.2 100 3
HLX 64341 s 904) 13.5 max. 32 min. 23 20 5.4x3.0 100 3
HLX 64341 Z s 904) 13.5 max. 32 min. 23 20 5.4x3.0 100 3
HLX 64342 s 904) 13.5 max. 41 max. 17 20 5.4x3.0 100 4
HLX 64361 s 904) 13.5 max. 35 min. 23 20 7.2x3.6 100 3
HLX 64361 Z s 904) 13.5 max. 35 min. 23 20 7.2x3.6 100 3
HLX 64382 s 904) 13.5 max. 43 max. 21 20 7.1x3.9 100 4
Applications: Literature:
Halogen lamps for current controlled operation are For further information on airfield lighting and IRC
used mainly in series connected systems for airfield technology, please refer to the following brochure:
lighting. The most popular type of base for these lamps • “The reliable guiding stars”, Effective solutions for
is the “PK30d” cement free prefocus cable base. airfield lighting: Tungsten halogen lamps and the
1) At 6.6 A innovative IRC technology.
2) Reference plane for length “a” is the upper plane of the adjustment ring; this must
be considered when designing optical systems 4) Despite transverse filament, can be inclined at any angle in S90 position
3) Version 64319 Z substitutes 64316; 64316 has been withdrawn 5) Connectors see page 41
38
Tungsten halogen lamps current controlled
Single ended lamps, for series operation at 6.6 Ampere
d d d
I1
I1
a
I1
I1
I1
a
a
a
a
I2
1 2 3 4 5
1)
Product Product
reference number
Product
reference
1) At 6.6 A
39
Tungsten halogen lamps current controlled
Double ended lamps, for series operation at 6.6 Ampere
d
d
1 l max. 2 l max.
Product Product
reference number
Product
reference
40
Reflector lamps with dichroic coating
l l l
d
d
d
1 2 3
1) 2)
Product Product
reference number
Small socket stone for 45 and 48 W reflector lamps Connectors for reflector and PK30d lamps
top view side view
l l
Female connectors A Female round connectors B
Complies with DIN 46247 for ø 4 mm pin
h
w
l: 22.2 mm max.
w: 15.2 mm max. Male connectors C Female connectors D
h: 7 mm max. Complies with DIN 46248 Complies with DIN 46247
41
Tungsten halogen lamps with reflector
d
1 l a 2 l a
Product Product
reference number
Product
reference
Product Product
reference number
Product
reference
1) Available on request
2) In certain countries there are third party property rights relating to equipment
which must be observed if these lamps are used in dentistry
42
Tungsten halogen lamps with reflector
d
d
1 l a a
l
2
Product Product
reference number
Product
reference
1) Available on request
2) Infrared lamp (temperature at focal point approx. 1300 °C)
43
Tungsten halogen lamps with reflector
d
d
1 l a
23 l a
Product Product
reference number
Product
reference
Product Product
reference number
Product
reference
93631 p 15 57 51 69 White 24 2
Literature:
For further technical information and notes for manu- • “Technology and applications, Low-voltage
facturers of control gear and lamp casings, please tungsten-halogen lamps”
refer to the following OSRAM brochure:
44
Mains voltage halogen lamps
3400 K
d
d
a
l
l
l
a
a
1 d 2 d 3 4
Product Product
reference number
Product
reference
From their designs, halogen mains voltage lamps can The colour temperature of the lamps varies according
be categorised as single-ended and double-ended to the application: 3400 K for maximum luminous effi-
lamps. Depending on the application, they are cacy, 3200 K for professional film and TV work, 3000 K
designed to operate on 230 V, 240 V or 120 V. or 2900 K for applications where long life is important.
45
Mains voltage halogen lamps
3400 K
d
1 l 2 l
Product Product
reference number
Product
reference
Double-ended mains
voltage halogen lamps for
stage lighting and video
recording.
46
Mains voltage halogen lamps
3200 K
d
d d
l
l
a
l
l
a
a
a
d
l
a
6
1 2 d 3
4 54
d
d d
l
a
l
a
a
l
95 6 7 8
Product Product
reference number
Single ended
646731) 4050300635811 CP/81 300 GY9.5 230 200
64513 4008321005588 300 GX6.35 120 150
645161) 4050300012032 CP/97 300 GX6.35 230 75
93592 4050300481531 FSX 400 GY9.5 230 75
93591 4050300481555 FSY 400 GY9.5 240 75
64678 4050300609102 800 G9.5 230 250
646801) 4050300006864 A1/244 500 GY9.5 230 50
646741) 4050300635859 CP/82 500 GY9.5 230 200
647161) 4050300506494 GKV 600 G9.5 230 250
646861) 4050300446325 DYR A1/233 650 GY9.5 230 50
64720 4050300017716 CP/23 650 GX9.5 230 100
64721 4050300217970 FKH CP/39 650 G22 230 100
647171) 4050300296692 FRL CP/89 650 GY9.5 230 150
Product
reference
47
Mains voltage halogen lamps
3200 K
d
d
l
a
l
OSRAM
d
l
a
a
6
41 2
5
l
a
l
a
37 84
Product Product
reference number
Single ended
64743 4050300227610 FEL CP/77 1000 G9.5 120 300
64743 HT1) 4050300506531 (FEL) 1000 G9.5 120 300
64576 4050300014197 P2/17 1000 GX6.35 230 75
647452) 4050300213262 FVA CP/70 1000 GX9.5 230 200
647472) 4050300217604 FKJ CP/71 1000 G22 230 200
93734 4050300350073 FEP CP/77 1000 G9.5 240 300
64754 4050300296746 CP/90 1200 GX9.5 230 200
647562)3) 4050300296722 CP/93 1200 G22 230 200
Product
reference
48
Mains voltage halogen lamps
3200 K
d
d d
d
l
l
a
1 2 d
l
l
a
d
a
l
a
l
a
l
d
l
a
5
a
3 4 5 6 7
Product Product
reference number
Single ended
647731) 4050300455280 2000 G9.5 120 300
647771) 4050300367682 CP/92 2000 G22 230 400
647882) 4050300213286 CP/72 2000 GY16 230 400
647892) 4050300219103 FKK CP/73 2000 G38 230 400
64787 4050300246154 CP/75 2000 G22 230 400
647961) 4050300406428 CP/91 2500 G22 230 400
648052) 4050300212609 CP/85 5000 G38 230 400
64815 4050300229904 ECR CP/83 10000 G38 230 400
64818 4050300370729 BCM CP/99 20000 G38 230 350
Product
reference
1) Available on request
2) Also available for 240 V
49
Mains voltage halogen lamps
3200 K
d
1 l 2 l l
3
Product Product
reference number
Double ended
64553 4050300014173 650 R7s 230 75
645711) 4050300014180 DXX P2/13 800 R7s 230 75
645831) 4050300249094 P2/20 1000 R7s 230 200
647411) 4050300209333 EKM P2/7 1000 R7s 230 200
647511) 4050300214641 P2/12 1250 R7s 230 200
647811) 4050300229997 FEX P2/27 2000 RX7s 230 300
648002) 4050300210254 P2/36 5000 K24s 230 1000
Product
reference
50
Mains voltage halogen lamps
3000 K
d
d
d
d
l
a
l
l
a
a
a
1 2 3 4
Product Product
reference number
Product
reference
51
Mains voltage halogen lamps
2900 K
l
a
2
1
Product Product
reference number
2900 K
646621) 4050300017419 M/38 300 230 GY9.5 2000
646721) 4050300233451 M/40 500 230 GY9.5 2000
Product
reference
52
STUDIOLINE®
Product Product
reference number
STUDIOLINE®
STUDIOLINE 55 W/3200 4050300575278 55 3800 3200 8000 2G11 10
STUDIOLINE 55 W/5600 4050300575292 55 3800 5600 8000 2G11 10
53
HPL® High performance halogen lamps
l1
a
Product Product
reference number
Product
reference
54
PAR 64 Halogen lamps
a
d l
Product Product
reference number
2)
Product
reference
Beam type:
SP = Spot
NSP = Narrow spot
FL = Flood
Parabolic reflector
lamps for use in stage
lighting. The axial
arrangement of the
built-in lamp achieves
an extremely uniform
distribution of light.
1) These lamps are also available for 240 V. The reference will then end in .../4
2) Do not tilt perpendicular to the filament
55
Lamps without halogen
low voltage
a
l
a
l
l
a
a
a
l
l
1 d 2 d 3 d 4 5 d
Product Product
reference number
Product
reference
56
Spectral lamps
21 21 Dimensions in mm
21
107 max.
107 max.
78 max.
54
43
43
31
Preferred burning position:
1 2 3 vertical with base down
Product Product
reference number
Spectral lamps
Cd/10 4050300210353 Cadmium 15 1.0 AC 15 15x6 Pico 9 1
Cs/10 4050300213842 Cesium 10 1.0 AC 10 15x6 Pico 9 1
He/10 4050300212258 Helium 60 1.0 AC 55 15x8 Pico 9 1
Hg 100 4050300231310 Mercury 45 0.6…1 AC/DC 22…44 20x3 Pico 9 2
HgCd/10 4050300211459 Mercury/Cadmium 30 1.0 AC 25 20x8 Pico 9 1
K/10 4050300212197 Potassium 10 1.0 AC 10 15x6.5 Pico 9 1
Na/10 4050300210377 Sodium 15 1.0 AC 15 15x6.5 Pico 9 1
Na 10 FL 4050300006925 Sodium 16 0.57 AC 9 – Pico 9 3
Ne/10 4050300212210 Neon 30 1.0 AC 30 15x8 Pico 9 1
Rb/10 4050300213866 Rubidium 10 1.0 AC 10 15x6 Pico 9 1
Tl/10 4050300211435 Thallium 15 1.0 AC 15 8x3 Pico 9 1
Zn/10 4050300212234 Zinc 15 1.0 AC 15 15x6 Pico 9 1
AC = Alternating current
DC = Direct current
Spectral lamps are discharge lamp that emit the line Safety:
spectrums of inert gases and metal vapours with high Because of the high-intensity light, the UV radiation
luminance or radiance. They are used wherever a line and the high internal pressure during operation, spec-
spectrum or monochromatic radiation is required. tral lamps may only be used in enclosed purpose-built
housings. Suitable filters should be used to ensure
Applications: that the UV radiation is reduced to an acceptable
Optics, radiation physics, spectroscopy, chemical level.
engineering and medicine.
57
Lamps for scientific purposes
≈60 ≈55
18 ➤ 18
➤
35
18
170
170
170
125±5
120±3
120±3
2A
1A 2B
1B 3
2 43
40 100 100
1) 1) 2) 3)
Product Product
reference number
Lamp types
WI 17/G 4050300209104 9 16 – 2600 1.6 x 20 s E27/51x39 14)
WI 40/G 4050300206783 31 6 2856 – 18 x 18 s + h E27/51x39 2
WI 41/G 4050300206806 31 6 2856 – 18 x 18 s + h E27/51x39 3
5)
Parameters
WI 17/G – – + (+) + 250–800 nm
– – + (+) + 250–2500 nm
WI 40/G (+) + – (+) –
WI 41/G + – – + –
1) Upper limit values for electrical data 5) Only in addition to measurement of the black body temperature or the colour
2) The colour temperature of 2856 K corresponds to light of type A (DIN 5035) temperature
3) s = standing (base down); h = hanging (base up)
4) Side view Fig. 1A Front view Fig. 1B
58
Aperture lamp in tubular form, 10 mm tube diameter
LINEX® linear excimer lamp, mercury-free
d
l
Product Product
reference number 8 mm
Product features:
• Long lamp life of up to 10,000 hours
• Instant light, flicker-free
• Excellent colour rendering (Ra > 86)
• Luminous flux unaffected by temperature
(–25 °C to +60 °C)
• Operating frequency > 100 kHz
Applications:
• Scanners, copiers, industrial image analysis,
additional lighting, backlighting
Product Product
reference number
Product
reference
Lamp
+24 V
Enable Lamp
0V
NC
59
Bases
IEC/EN 60061-1
4.8
7
5.3
12.7
17
60
Bases
IEC/EN 60061-1
K24s S25.5
Length of cable S30
250 mm
G38 GX38 Hole of cable lug
Sheet 7004-76 ø 8.4 mm
30
R7s
PK30d RX7s PG22-6.35
Sheet 7004-92 A Sheet 7004-48
61
Bases
21
d1
d2
d2 d2 d2 d1
12
d2 d1 d1
SFc25-14 (M 14x1.5)
SK19/36 SFcX27-8 SFa15-10 SFa27-7.9 SFa21-12 SFaX27-10 SFc27-14 (M 14x1.5)
SK27/50 (5/16-18UNC-2 A) SFa16-8 SFa27-10 DIN 49759 SFaX27-9.5 SFc15-6
SFcX25-10 SFa16-10 SFa27-11 SFaX27-12 SFc28-13
SFa20-8 SFa27-12 SFaX27-13 SFc30-14
SFa20-10 SFa27-14 SFaX27-14
SFa21-5 SFa28-18 SFaX28-13
SFa25-10 SFa30-7.9 SFaX30-9.5
SFa25-12 SFa30-14 SFaX30-16
SFa25-14 SFa30-15/110
SFa28-14 SFa30-18
(560 mm SFa30-22
cable)
d1 d1
d2 1.6
d2
The first set of figures in the base reference (e.g. SFa 9-2) means that the base sleeve has a diameter (d1) of
9 mm and the small cylindrical attachment has a diameter of 2 mm (d2). For base SFaX 27-10, the number 27
indicates the sleeve diameter (d1), while the 10 indicates the diameter of the base pin (d2); for threaded bases
the second figure indicates the diameter of the threaded pin (d2).
62
Burning positions
Schematic diagrams
10° 15° +15° 20° +20° 30° +30°
s 10 s 15 s 15 s 20 s 20 s 30 s 30
p 15 p 20 p 30
90°
45°
30° 15°
p 30 p 45 p 90/15
permitted
not permitted
Lamps with plane or flat mandril filaments should only be inclined perpendicular to the filament plane.
63
Glossary of the most
important lighting terms
Index of types
Index ANSI code
Index LIF code
Glossary of the most important
lighting terms
As with any technical or scientific discipline, lighting Light and radiation
technology has its own special terms and concepts for Light is taken to mean the electromagnetic radiation
defining the characteristics of lamps and luminaires that the human eye perceives as brightness, in other
and for standardising the units of measurement. words that part of the spectrum that can be seen.
This is the radiation between 360 and 830 nm, a tiny
fraction of the known spectrum of electromagnetic
The most important of these are described here. radiation.
Illuminance E Illuminance E
Unit of measurement: lux [lx]
Illuminance E is the ratio between the luminous flux
and the area being illuminated.
Luminance L
Luminance L
Unit of measurement: candelas per square metre [cd/m2] Area viewed Observer
The luminance L of a light source or an illuminated
area is a measure of the brightness. Ill
um
in
at
ed
ar Luminous intensity
ea
Luminous intensity Luminous flux in solid angle Luminance Luminous intensity [cd]
L
[cd] Solid angle Ω [sr] [cd/m2] Viewed luminous area [m2]
Illuminance Luminous flux falling on area [lm] Luminous efficacy Generated luminous flux [lm]
E
[lx] Illuminated area [m2] [lm/W] Electrical power consumed [W]
66
Luminous efficacy
Unit of measurement: lumens per watt [lm/W] Chromaticity diagram to DIN 5033
Luminous efficacy indicates the efficiency with which
the electrical power consumed is converted into light.
Colour temperature
Unit of measurement: Kelvin [K]
The colour temperature of a light source is defined in
comparison with a “black body radiator” and plotted
on what is known as the “Planckian curve”. The higher
the temperature of this “black body radiator” the
greater the blue component in the spectrum and the
smaller the red component. An incandescent lamp
with a warm white light, for example, has a colour
temperature of 2700 K, whereas a daylight fluorescent
lamp has a colour temperature of 6000 K.
Colour appearance
The colour appearance of a lamp can be neatly defined
in terms of colour temperature. There are three main
categories here:
Warm White < 3300 K
Cool White 3300 to 5000 K
Daylight > 5000 K
Despite having the same colour appearance, lamps
may have very different colour rendering properties
owing to the spectral composition of their light.
Colour rendering
As a rule, artificial light should enable the human eye Extract from the chromaticity diagram showing the Planckian curve
to perceive colours correctly, as it would in natural
daylight. Obviously, this depends to some extent on
the location and purpose for which light is required.
Luminaire efficiency
Luminaire efficiency (also known as light output ratio)
is an important criterion in gauging the energy efficien-
cy of a luminaire. This is the ratio between the lumi-
nous flux emitted by the luminaire and the luminous
flux of the lamp (or lamps) installed in the luminaire.
67
Index of types
68
Index of types
69
Index of types
70
Index ANSI Code
71
Index LIF Code
72
OSRAM worldwide
73
Japan Poland Taiwan
OSRAM MELCO Ltd. OSRAM sp. z o.o. OSRAM Taiwan Company Ltd.
Tobu Yokohama Bldg.No. 3 (4F) ul. Wiertnicza 117 Sung Chiang Road,
8-29 Kita-Saiwai 2-chome, 02-952 Warszawa 7th Floor, No. 87
Nishi-Ku Tel.: +48-22-550 23 00 Sug Ching Road
220-0004 Yokohama Fax: +48-22-550 23 19 P.O. Box 46304
Tel.: +81-45-3 23 51-20 Portugal Taipei – Taiwan, R.O.C.
Fax: +81-45-3 23 51-55 OSRAM Empresa de Tel.: +886-2-25 08 35 02
OSRAM Ltd. Aparelhagem Eléctrica Lda. Fax: +886-2-25 09 67 82
Tobu Yokohama Bldg.No. 3 (6F) Rua do Alto do Montijo Thailand
8-29 Kita-Saiwai 2-chome, Nr. 15-4 andar OSRAM Thailand Co. Ltd.
Nishi-Ku 2795-619 Carnaxide 100/45, 24th Floor
220-0004 Yokohama Tel.: +351-2 14 16 58 60 Sathorn Nakorn Tower
Tel.: +81-45-3 23 51-00 Fax: +351-2 14 17 12 59 North Sathorn Road
Fax: +81-45-3 23 51-10 Romania Khwaeng Silom
Korea OSRAM Romania S.R.L. Khet Bangrak, Bangkok 10500
OSRAM Korea Co. Ltd. Calea Plevnei nr. 139 Tel.: +66-2-6 36 74 75
3rd. Fl. Ye-Sung Bldg. corp B, sector 6 Fax: +66-2-6 36 74 77
150-30 Samsung-dong, 060011 Bucaresti Turkey
Kangnam-Ku Tel.: +40-21-2077-386 OSRAM AMPUL TIC. A.S.
Seoul 135-090 Fax: +40-21-2077-389 Meclisi Mebusan Caddesi 125
Tel.: +82-2-5 54 41 12 Russia 80400 Findikli, Istanbul/TR
Fax: +82-2-5 56 16 44 OSRAM Moscow Tel.: +90-212-334-1334
Latvia Ul. Malaja Kaluschskaja 15/4 Fax: +90-212-334-1142
(supported by OSRAM Finland) 119071 Moscow Ukraine
Lithuania Tel.: +7-095-9 35 70-70 OSRAM Rep. Office
(supported by OSRAM Finland) Fax: +7-095-9 35 70-76 ul. Vorovskogo, 36
Singapore 01054 Kiev/Ukraine
Macedonia Tel.: +380-44-2 46 93 14
(supported by OSRAM Greece) OSRAM Pte. Ltd.
159 Sin Ming Road Fax: +380-44-2 46 99 91
Madeira #05-04 Amtech Building United Arab Emirates
(supported by OSRAM Portugal) 575625 Singapore OSRAM Middle East FZE
Malaysia Tel.: +65-65 52 01 10 P.O. Box 17476
OSRAM Sdn Bhd Fax: +65-65 52 71 17 Room #602-603, LOB #16
7.05-7.06 Amoda Building Slovakia Jebel Ali Free Zone
22 Jalan Imbi OSRAM Nové Zámky Dubai United Arab Emirates
55100 Kuala Lumpur Komárnanská cesta 7 Tel.: +971-4-88 13-767
Tel.: +60-3-21 45 95-33 94093 Nové Zámky Fax: +971-4-88 13-769
Fax: +60-3-21 45 95-35 Tel.: +42-1-35 64 64-0 USA
Mexico Fax: +42-1-35 64 64-880 OSRAM SYLVANIA INC.
OSRAM de México, S.A. de C.V. Slovenia 100 Endicott Street
Camino a Tepalcapa No. 8 (supported by OSRAM Austria) Danvers, MA 01923
Col. San Martin Tel.: +1-978-777-19 00
54900 Tultitlán South Africa Fax: +1-978-750-21 52
Edo. de México OSRAM (Pty.) Ltd.,
260, 15th Road Vietnam
Tel.: +52-55-58 99-18 00 OSRAM Singapore Pte. Ltd.
Fax: +52-55-58 84-70 00 1683 Randjespark/Midrand
Private BAG X 206 Rep. Office Vietnam
Netherlands 1685 Halfway House/Midrand 59A Ly Thai To Street,
OSRAM Nederland B.V. Tel.: +27-11-2 07 56 00 Hanoi Press Club
Vennootsweg 15 Fax: +27-11-8 05 17 11 Hoan Kiem District
2404 CG Alphen a/d Rijn Hanoi
Postbus 3 32 Spain Tel.: +84-4-93 49-801
2400 Alphen a/d Rijn OSRAM, S.A. Fax: +84-4-93 49-803
Tel.: +31-172-48 38 38 Calle de la Solana, 47
28850 Torrejón de Ardoz (Madrid) Yugoslavia
Fax: +31-172-44 30 25 Rep. Office of OSRAM GmbH
Tel.: +34-91-6 55 52 00
Norway Fax: +34-91-6 56 82 16 Predstavništvo OSRAM GmbH
OSRAM AS Čika Ljubina 15/V
Strandveien 50 Sweden 11000 Beograd
1366 Lysaker OSRAM AB Tel.: +381-11-30 30-860
Tel.: +47-67 83 67-00 Rudanvägen 1 Fax: +381-11-30 30-853
Fax: +47-67 83 67-40 13650 Haninge
Box 5 04 Internet
Philippines 13650 Haninge http://www.osram.de
OSRAM Philippines Ltd. Corp. Tel.: +46-8-7 07 44-00 http://www.osram.com
Unit 2002–2003 Fax: +46-8-7 07 44-40 http://catalog.myosram.com/DE
Antel Global Corporate Center http://catalog.myosram.com/EN
Julia Vargas Avenue Switzerland
Ortigas Center OSRAM AG, Winterthur
Pasig City In der Au 6
Tel.: +632-687 60 48-50 8401 Winterthur/Töss
Fax: +632-687 60 57 Postfach 2179
8401 Winterthur/Töss
Tel.: +41-52-2 09 91 91
Fax: +41-52-2 09 92 75
74
Symbols
Display/Optic
Luminous flux in lumen for lamp Max. black body temperature (Kelvin)
129 K001 GB 09/04 WO Subject to change without notice. Errors and omissions excepted.