Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 349 views

    A4cf0 Kiahyundai P0734

    Uploaded by

    Huỳnh Minh Đức
    This document provides information about a diagnostic trouble code (DTC) P0734 related to the 4th gear ratio being incorrect in an automatic transmission. Specifically: - The input shaft speed multiplied by the 4th gear ratio should equal the output shaft speed when in 4th gear. - DTC P0734 is set if those speeds do not match, typically due to issues like a stuck control valve or faulty solenoid rather than an electrical problem. - The transmission goes into a fail-safe mode by locking into 3rd gear if this code is detected four times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    A4cf0 Kiahyundai P0734

    Uploaded by

    Huỳnh Minh Đức
    349 views2 pages
    This document provides information about a diagnostic trouble code (DTC) P0734 related to the 4th gear ratio being incorrect in an automatic transmission. Specifically: - The input shaft speed multiplied by the 4th gear ratio should equal the output shaft speed when in 4th gear. - DTC P0734 is set if those speeds do not match, typically due to issues like a stuck control valve or faulty solenoid rather than an electrical problem. - The transmission goes into a fail-safe mode by locking into 3rd gear if this code is detected four times.

    Original Title

    A4CF0 KIAHYUNDAI P0734

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a diagnostic trouble code (DTC) P0734 related to the 4th gear ratio being incorrect in an automatic transmission. Specifically: - The input shaft speed multiplied by the 4th gear ratio should equal the output shaft speed when in 4th gear. - DTC P0734 is set if those speeds do not match, typically due to issues like a stuck control valve or faulty solenoid rather than an electrical problem. - The transmission goes into a fail-safe mode by locking into 3rd gear if this code is detected four times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    349 views2 pages

    A4cf0 Kiahyundai P0734

    Uploaded by

    Huỳnh Minh Đức
    This document provides information about a diagnostic trouble code (DTC) P0734 related to the 4th gear ratio being incorrect in an automatic transmission. Specifically: - The input shaft speed multiplied by the 4th gear ratio should equal the output shaft speed when in 4th gear. - DTC P0734 is set if those speeds do not match, typically due to issues like a stuck control valve or faulty solenoid rather than an electrical problem. - The transmission goes into a fail-safe mode by locking into 3rd gear if this code is detected four times.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    G 1.

    0 SOHC > Transmission Automatic Transaxle > P0734 Gear 4 Incorrect Ratio > General Information

    Component Location

    General Description
    The value of the input shaft speed should be equal to the value of the output shaft speed, when
    multiplied by the 4th gear ratio, while the transaxle is engaged in the 4th gear. For example, if the
    output speed is 1,000 rpm and the 4th gear ratio is 0.712, then the input speed is 712 rpm.
    DTC Description
    This code is set if the value of input shaft speed is not equal to the value of the output shaft, when
    multiplied by the 4th gear ratio, while the transaxle is engaged in 4th gear. This malfunction is mainly
    caused by mechanical troubles such as control valve sticking or solenoid valve malfuctioning rather
    than an electrical issue.
    DTC Detecting Condition
    Item Detecting Condition Possible Cause
    DTC Strategy ● 4th gear incorrect ratio
    ● Engine speed >400rpm
    ● Output speed >900rpm
    ● Lever position : D
    Enable Conditions ● Input speed >300rpm
    ● A/T oil temp output ≥ -10°C
    ● TRANSAXLE RANGE SWITCH is normal ● Faulty Input speed sensor
    and after 2sec is passed from IG ON ● Faulty output speed sensor
    ● Faulty UD clutch or 2nd brake
    ●ㅣinput speed/4th gear ratio - output speed
    Threshold Value
    ㅣ≥200rpm
    Diagnostic Time ● More than 1sec
    ● Locked into 3 rd gear.(If diagnosis code
    Fail Safe P0734 is output four times, the transaxle is
    locked into 3rd gear)

    Signal Waveform

    1/2
    G 1.0 SOHC > Transmission Automatic Transaxle > P0734 Gear 4 Incorrect Ratio > General Information

    A : INPUT SPEED SENSOR


    B : OUTPUT SPEED SENSOR

    2/2

    You might also like