Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Concrete Final

Download as pdf or txt
Download as pdf or txt
You are on page 1of 48

CONCRETE

Mohsin Jamal
Asst.Prof.
Dept. of Civil Engg.
Aliah University
Newtown Campus Kolkata
INTRODUCTION
CLASSIFICATION
PRODUCTION
The stages of concrete production are:
Batching or measurement of materials
For good quality concrete a proper and
accurate quantity of all the ingredients
should be used. The aggregates,
cement and water should be measured
with an accuracy of ± 3 per cent of
batch quantity and the admixtures by 5
per cent of the batch quantity. There
are two prevalent methods of batching
materials, the volume batching and the
weigh batching. The factors affecting
the choice of batching method are the
size of job, required production rate,
and required standards of batching
performance. For most important
works weigh batching is
recommended.
Tilting mixer Non Tilting mixer
Riversing drum

Pan type
https://cs-iitd.vlabs.ac.in/

https://theconstructor.org/concrete/concrete-quality-test/8927/

https://www.qualityengineersguide.com/

You might also like