The document contains measurements of vertical alignment, pulley alignment, and fan alignment for items 12-H-1114, 1115, 1119. The measurements were taken using an inclinometer and show values between 0.5 and 0.7 degrees with a tolerance range of ±2 degrees for each alignment position on parts A1, A2, B1, and B2.
The document contains measurements of vertical alignment, pulley alignment, and fan alignment for items 12-H-1114, 1115, 1119. The measurements were taken using an inclinometer and show values between 0.5 and 0.7 degrees with a tolerance range of ±2 degrees for each alignment position on parts A1, A2, B1, and B2.
Original Description:
report 3
Original Title
Shaft Run-out Tolerance Record 12-H-1114 12-H-1115 12-H-1119
The document contains measurements of vertical alignment, pulley alignment, and fan alignment for items 12-H-1114, 1115, 1119. The measurements were taken using an inclinometer and show values between 0.5 and 0.7 degrees with a tolerance range of ±2 degrees for each alignment position on parts A1, A2, B1, and B2.
The document contains measurements of vertical alignment, pulley alignment, and fan alignment for items 12-H-1114, 1115, 1119. The measurements were taken using an inclinometer and show values between 0.5 and 0.7 degrees with a tolerance range of ±2 degrees for each alignment position on parts A1, A2, B1, and B2.
