TM0016A

1/8
TAI-SAW TECHNOLOGY CO., LTD.

No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038 FAX: 886-3-4697532
E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
Product Specifications Approval Sheet
Product Description: SMD TSX 2.0x1.6 26MHz
(Temperature Sensing Crystal)
TST Part No.: TM0016A
Customer Part No.:
Customer signature required
Company:
Division:
Approved by :
Date:
Checked by: Glen Peng
Approved by: Kelly Huang
Date: 01/06/2020
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the changes.
4.
TAI-SAW TECHNOLOGY CO., LTD. TST DCC

Release document
2/8

SMD TSX 2.0x1.6 26MHz
MODEL NO.: TM0016A REV. NO.: 2
Revise:
Rev. Rev. Rev. Account Date Ref. No. Revised by
Page
1 N/A Initial release 12/20/19’ N/A Glen Peng
2 5 Update product thickness 01/06/20’ ECN-202000006 Glen Peng

Release document
3/8

SMD TSX 2.0x1.6 26MHz
MODEL NO.: TM0016A REV. NO.: 2
Features:
Surface Mount Hermetic Package
Excellent Reliability Performance
Good Frequency Perturbation and Stability over temperature
Ultra Miniature Package
Moisture Sensitivity Level (MSL) : Level-1
Description and Applications:

Surface mount 2.0mmx1.6mm crystal unit for use in wireless communications devices,
especially for a need of ultra miniature package for mobility.
Electrical Specifications:
TM0016A Specification(Crystal)
Nominal Frequency 26.000000 MHz
Mode of Oscillation Fundamental
Storage Temperature Range -40°C to +105°C
Operating Temperature Range -40°C to +85°C

Frequency Stability over Operating
Temperature Range +/-16 ppm (referred to the value at 25°C)
Frequency Make Tolerance (FL) +/-10 ppm @ 25°C +/- 3°C
Equivalent Series Resistance (ESR) 40 Ω max

Nominal Drive Level 10uW typical and 100 uW max
Shunt Capacitance (Co) 3.0 pF max
Load Capacitance (CL) 7 pF
Hysteresis +/-0.5 ppm @ -40~85°C
Aging +/-1ppm/year
Insulation Resistance 500 MW min./DC 100V
Trim Sensitivity 14.5 ppm/pF min
Unit Weight 5.7mg+/-0.5mg
Inflection Point (Ti) 30.5 +/- 1.5°C

Release document
4/8
Room Temp (T0) 30.5°C
S curve 3 order curve fitting coefficient Min Typ Max Unit
C1 -0.46 -0.36 -0.26 ppm/°C
Marking Laser Marking
Resistance (25°C) 100K +/- 1% Ω

4250 +/- 1% k
B-constant
(Evaluated from 25°C to 50°C, 1% tolerance)
Coeffient reference to 30.5C

Min Curve Typ Curve Max Curve Unit
C1 -0.45 -0.36 -0.27 ppm/℃
C2 -4.16 -2.28 -2.03 e -ppm/℃2
4
e5-ppm/℃3
C3 9.19 9.22 9.20

Release document
5/8
Mechanical Dimensions (unit: mm):
Marking:
Line 1: XX; Frequency (26)
Line 2: T; Traceable Code + □; date Code of Year/Month

Release document
6/8
Date Code Table: Year/Month

Year/Month 1 2 3 4 5 6 7 8 9 10 11 12
2018 A B C D E F G H J K L M
2019 N P Q R S T U V W X Y Z
2020 a b c d e f g h i j k m
2021 n p q r s t u v w x y z
Reel Dimensions (mm):
Tape Dimensions (mm):
[NOTE]:
1. Unless otherwise specified tolerance on dimension +/-0.1 mm.
Direction of Feed
2. Material: conductive polystyrene with color black.
3. 10 pitch cumulative tolerance +/-0.2 mm.

Release document
7/8
Packing Quantity/Packing:
3K pcs maximum per reel
Reflow Profile:
Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec

2. Temperature: 217+/-5 deg C; Time: 90~100 sec

8/8
Reliability Specifications
Reference
Test name Test process / method standard
Mechanical characteristics
resistance to Temp./ Duration : 265°C /10sec ×2 times EIAJED-4701
Soldering heat Total time : 4min.(IR-reflow)
(IR reflow) -300(301)M(II)
Vibration Total peak amplitude : 1.5mm MIL-STD 202G

Vibration frequency : 10 to 2000 Hz method 204
Sweep period : 20 minute
Vibration directions : 3 mutually perpendicular
Duration : 2 hr / direc.
Mechanical directions : 3 impacts per axis MIL-STD 202G
Shock Acceleration : 3000g's, +20/-0 % method 213
Duration : 0.3 ms (total 18 shocks)
Waveform : Half-sine
Solderability Solder Temperature:265±5°C J-STD-002
Duration time: 5±0.5 seconds.
Environmental characteristics
Thermal Shock Heat cycle conditions MIL-STD 883G
-40 ℃ (30min) ←→ 85 ℃ (30min) method 1010.8
* cycle time : 10 times
Humidity test Temperature : 85 ± 2 °C MIL-STD 202G

Relative humidity : 85% method 103
Duration : 96 hours
Dry heat Temperature : 125 ± 2 °C MIL-STD 202G
( Aging test ) Duration : 168 hours method 108A
Cold resistance Temperature : -40 ± 2 °C IEC 60068-2-1

(Low Temp Storage) Duration : 96 hours

TM0016A

Uploaded by

Copyright:

Available Formats

TM0016A

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TM0016A

Uploaded by

Copyright:

Available Formats

1/8

TAI-SAW TECHNOLOGY CO., LTD.

Product Specifications Approval Sheet

Product Description: SMD TSX 2.0x1.6 26MHz

(Temperature Sensing Crystal)

TST Part No.: TM0016A

Customer Part No.:

Customer signature required

Checked by: Glen Peng

Approved by: Kelly Huang

TAI-SAW TECHNOLOGY CO., LTD. TST DCC

TAI-SAW TECHNOLOGY CO., LTD.

TAI-SAW TECHNOLOGY CO., LTD. TST DCC

TAI-SAW TECHNOLOGY CO., LTD.

Description and Applications:

Nominal Frequency 26.000000 MHz

Mode of Oscillation Fundamental

Storage Temperature Range -40°C to +105°C

Operating Temperature Range -40°C to +85°C

Frequency Make Tolerance (FL) +/-10 ppm @ 25°C +/- 3°C

Equivalent Series Resistance (ESR) 40 Ω max

Shunt Capacitance (Co) 3.0 pF max

Load Capacitance (CL) 7 pF

Hysteresis +/-0.5 ppm @ -40~85°C

Insulation Resistance 500 MW min./DC 100V

Trim Sensitivity 14.5 ppm/pF min

Unit Weight 5.7mg+/-0.5mg

Inflection Point (Ti) 30.5 +/- 1.5°C

S curve 3 order curve fitting coefficient Min Typ Max Unit

C1 -0.46 -0.36 -0.26 ppm/°C

Marking Laser Marking

Resistance (25°C) 100K +/- 1% Ω

Coeffient reference to 30.5C

TAI-SAW TECHNOLOGY CO., LTD. TST DCC

Mechanical Dimensions (unit: mm):

TAI-SAW TECHNOLOGY CO., LTD. TST DCC

Date Code Table: Year/Month

Reel Dimensions (mm):

Tape Dimensions (mm):

TAI-SAW TECHNOLOGY CO., LTD. TST DCC

Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec

TAI-SAW TECHNOLOGY CO., LTD.

Vibration Total peak amplitude : 1.5mm MIL-STD 202G

Humidity test Temperature : 85 ± 2 °C MIL-STD 202G

Cold resistance Temperature : -40 ± 2 °C IEC 60068-2-1

TAI-SAW TECHNOLOGY CO., LTD.

You might also like