Crochet pattern | US crochet terms

ENGLISH

REVERSIBLE
SNOWMAN CUPCAKE
Christmas series
Difficulty Level: Advanced Beginner
Crochet pattern by Febby Pranajaya @chibiscraft
 Crochet pattern by Febby Pranajaya @chibiscraft 1

DISCLAIMER
Hello! Thank you for choosing this pattern. This pattern is for your personal use only.
Please do not reproduce, distribute, or resell it, in parts or in its entirety, in any
format or translation. However, you may sell finished handmade items made from this
pattern as long as they were made by yourself in a limited number. Please give credit to
Chibiscraft as the pattern designer.

If you are going to share pictures on instagram, please remember to:

- insert *Pattern by @chibiscraft
- use hashtag #chibiscraftpattern

Please do not hesitate to contact me if you need any clarifications.

e-mail: chibiscraft@gmail.com https://www.facebook.com/chibiscraft

https://www.instagram.com/chibiscraft

TIPS: ABBREVIATIONS
It is recommended to crochet tightly by using This pattern is written in US Standard Crochet
a smaller crochet hook. Terms and assumes knowledge of basic stitches.
Try to work every part using the same stitch R = row/round
tension unless stated otherwise. MR = magic ring
Count your stitches. st = stitch/stitches
Use a stitch marker or a piece of yarn to mark sc = single crochet
beginning/ending of the round. inc = sc increase (2 sc in the same st)
Each round is worked in a continuous spiral. inc3 = 3 sc in the same st
Do not join rounds with slip stitch or turn dec = sc decrease (crochet 2 st together)
unless stated otherwise. ch = chain
Crochet through both loops unless stated sl st = slip stitch
otherwise. hdc = half double crochet
It is highly recommended that you read hdc inc = 2 hdc in the same st
through the entire pattern before beginning dc = double crochet
to crochet. dc inc = 2 dc in the same st
dc inc3 = 3 dc in the same st
MATERIALS AND TOOLS tr = treble crochet
2.0 mm hook or size suitable for yarn used tr inc = 2 tr in the same st
Yarn/tapestry needle, embroidery needle FL = Front loop/loops
Fiberfill for stuffing BL = Back loop/loops
Yarn in the same size (I used Yarnart Jeans, BLO = BL only
sport weight) in the following colors: white (no. FLO = FL only
01), red (no. 90), green (no. 52), dark brown [____] = repeat sequence between the square
(no. 70), grey (no. 49), orange (left over), peach brackets for the indicated number of times
(left over) (__) = stitch count at the end of the row/round
A pair of safety eyes, diameter 8mm
2 flat black beads, diameter 4 mm, for the
snowman’s buttons
Scissors and stitch markers
Optional: multifunction glue
©2023 chibiscraft // Febby Pranajaya - All rights reserved
 Crochet pattern by Febby Pranajaya @chibiscraft 2

DIMENSION
The size will vary, depending on the yarn used. If you use the same materials as I did, the finished amigurumi
is about 9 cm tall when on the snowman side, and 6.5 cm tall when on the cupcake side.

SPECIALTECHNIQUE

Invisible Finish
After completing the last st, cut the yarn Skip 1st
Last st
and pull on the loop to draw the tail. Using
the tapestry needle, skip the next st, and
insert the needle from front to back, under Back loop of
last st
both loops. Go back to the last st, and insert
the needle through the back loop of this st.
Pull on the tail.

Here is the result of

invisible finish

Color Changing While Working in Rows

When changing the yarn color while working Picture 1 Result:
in rows, do not use tapestry technique (a Yarn tail from
previous color
technique where the non-working color is is behind the work

hidden within the stitches/along the back of

the work).
There are 2 options to manage the tail of
the previous yarn color:
1. Everytime you change the yarn color,
leave the previous yarn at the back of
your work (see picture 1).
Picture 2 Result:
2. Everytime you change the yarn color,
leave the previous yarn towards the
front before you take the new yarn (see
picture 2).
For this project I did the first option. But it’s
up to you to choose between these options.
Yarn tail from
previous color is in
front of the work

©2023 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 3

R2: BLO 3sc, 6sc (9), 1ch, turn

HEAD
R3: BLO 6sc, 3sc (9), 1ch, turn
Start with white yarn.
For every even Row, do the same as R2, and for
R1 : 6sc in MR (6)
every odd Row, do the same as R3. Do it until R47.
R2 : 6inc (12)
R48: BLO 3sc, 6sc (9)
R3 : [sc, inc]x6 (18)
R4 : [sc, inc, sc]x6 (24)
R5 : [3sc, inc]x6 (30)
R6 : [2sc, inc, 2sc]x6 (36)
R7 : [5sc, inc]x6 (42) Stop for a while and try to put your crocheted
R8 : [3sc, inc, 3sc]x6 (48) rows around the Snowman’s head. It should wrap
R9-R18 (10 rounds): 48sc (48) the head nicely, not too tight or too loose.
Place the safety eyes between R13-14, 8st apart. Note: If your stitch tension is usually tighter or looser
R19: [3sc, dec, 3sc]x6 (42) while working in rows compared to working in rounds, it
R20: BLO [5sc, dec]x6 (36) can cause the crocheted rows cannot fit nicely to the
Fasten off, leaving a yarn tail. Weave in ends. We head. If so, you may need to make some adjustments.
Some options:
will join it with the body later.
work looser/tighter while working in rows.
use bigger/smaller hook size while working in rows.
adjust number of rows. But make sure to end with
an even row and to match the number of stitches in
the next rounds
8st apart

R13
R14

BODY/CUPCAKE’S LINER
We will crochet using red and grey yarn alternately
(please see how to change color while working in
rows - page 2). To simplify the writing, red and
grey colors of the font below correspond to the
yarn colors.
First, we will work in rows. Try to work with the
same stitch tension as when you work in rounds.
Start with grey yarn. Prepare about 15 cm starting
yarn tail for sewing (for each color). Make 3ch,
7ch, then start from the second loop from the
hook:
Cut the grey yarn. But don’t cut the red yarn.
R1: 6sc, 3sc (9), 1ch, turn From now on, we will work in rounds at the row-
ends up the side. Make 1ch, then:
R1: make a sc to join the flat cupcake liner to
3ch
Skip the ch form a circle, 5sc, dec, [6sc, dec]x5 (42)
1ch made 7ch made from
because of the
color changing R2: [5sc, dec]x6 (36)
color changing

©2023 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 4

Flip the body/cupcake’s liner down. Join the first

row (Row 1) of the body with the last row (Row 48)
by sewing their FL using the red and grey starting
yarn tail of the body.

In the next round we will join the head to the body.

To join the head, position the head inside the body.
Crochet through both body and head layer
according to the following instructions.
R3: with head: [2sc, dec, 3sc, dec]x4 (28)

SCARF
Hold the Snowman with the body facing you.
Attach the grey yarn at the FL of R19 of the head
(you worked R20 BLO). Make 2ch, then FLO 42dc
(42).
Fasten off. Leave 10cm long tail to join both ends
of the scarf.

Start to stuff the head with fiberfill and continue

stuffing as you go.
R4: [2sc, dec]x7 (21)
R5: [sc, dec]x7 (14)
R6: 7dec (7)
Stuff the head firmly.
Fasten off, leaving a yarn tail. Using the yarn
needle, weave the yarn tail through the front loop
of each remaining stitch and pull it tight to close.
Hide the tail inside the head.

©2023 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 5

HANGING END OF THE SCARF R12: FLO [2sc, inc]x8 (32)

Start with grey yarn. Make 6ch, then start from R13: [3sc, inc]x8 (40)
the second loop from the hook, make 5dc (5). Fasten off, leaving a tail. Make an invisible finish,
Fasten off. Leave 10cm long tail for sewing. weave in ends.

ARMS (make 2)
Start with dark brown yarn. Make 8ch, then start
from the second loop from the hook: 3sl st, then LEAVES (make 2)
make 4ch, start from the second loop from the Start with green yarn.
hook: 3sl st. Then continue to crochet 4sl st. Make 7ch, start from the second loop from the
Fasten off. Leave 10cm long tail for sewing. hook 3sl st, then make 4ch, start from the second
loop from the hook 2sl st, mark the next ch with a
stitch marker*, then [make 3ch, start from the
second loop from the hook: 2sl st]x2, sl st to the
marked ch*, then make 4ch, start from the second
loop from the hook 3sl st, continue making 3 more
sl st until the end of the ch.
See the crochet diagram below.
Fasten off, leave 10cm long tail for sewing.

HAT
Start with dark brown yarn.
R1: 7sc in MR (7)
R2: 7inc (14)
R3: [sc, inc]x7 (21)
R4: [2sc, inc]x7 (28)
sl st to the first st
R5: 1ch, BLO 28sc (28)
R6: [12sc, dec]x2 (26)
start
R7: 26sc (26)
ch
R8: [11sc, dec]x2 (24)
marked ch*
R9: 24sc (24)
sl st
Change to red yarn.
R10-11 (2 rounds): 24sc (24)
Change back to dark brown, cut the red, leaving
about 30 cm long tail for sewing.

©2023 chibiscraft // Febby Pranajaya - All rights reserved

 Crochet pattern by Febby Pranajaya @chibiscraft 6

PEPPERMINT CANDIES (make 2)

Start with white yarn. Work in joined rounds.
R1: 7sc in MR (7), sl st in the first st
In the next round, we will crochet using red and
white yarn alternately. To simplify the writing, the
red and white color of the font below corresponds
to the yarn colors.
R2: 2ch (this is not counted as a hdc), hdc in the R14
same st where you make the sl st, hdc in R15
R16
the same st, [hdc, hdc in the same st]x6 (14),
sl st in the first st.
Fasten off, leave a long tail for sewing.

ASSEMBLY
Attach the arms to the body at the red part,
just below the scarf.
Attach the hanging end of the scarf just below
the main scarf, with the wrong side facing
outside.
Attach the hat to the top of the head using the
red yarn tail (I didn’t stuff the hat).
Attach the leaves and candies on the top of
the head, near the hat.
Using orange yarn, embroider the nose,
between R14-15 of the head, 2st wide.
Using dark brown yarn, embroider the smile
at R16 below the nose.
Using peach yarn, embroider the rosy cheek
between R15-16 of the head.
Attach/glue the flat black beads on the body
as the buttons.
Congratulations! Your reversible Snowman cupcake amigurumi is ready. I hope you enjoyed crocheting him.
And if you like this pattern, do not hesitate to give a review. It will be my pleasure to see your finished toy with
the hashtag #chibiscraftpattern, or add a Ravelry project.
Have a nice day!
With love, Febby Pranajaya

♥️ Special thanks to my pattern testers: Sal @ellesami2021, Megan @meganbrewerton, Irene @cheerfulmakes,
Rahma @mercy_handmade, Albus @tales_about_dreams ♥️

©2023 chibiscraft // Febby Pranajaya - All rights reserved