Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    M-500 Datasheet

    Uploaded by

    Mexc6for1
    The M-500 UHF RFID module uses the PR9200 chip and provides excellent tag reading performance up to 15 meters with high gain antennas. It has wide operating temperature range, stable performance, and simple interface. The module supports both connector and surface mount installation methods and provides UART communication with optional Wiegand or GPIO interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    M-500 Datasheet

    Uploaded by

    Mexc6for1
    30 views7 pages
    The M-500 UHF RFID module uses the PR9200 chip and provides excellent tag reading performance up to 15 meters with high gain antennas. It has wide operating temperature range, stable performance, and simple interface. The module supports both connector and surface mount installation methods and provides UART communication with optional Wiegand or GPIO interfaces.

    Original Title

    M-500_datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The M-500 UHF RFID module uses the PR9200 chip and provides excellent tag reading performance up to 15 meters with high gain antennas. It has wide operating temperature range, stable performance, and simple interface. The module supports both connector and surface mount installation methods and provides UART communication with optional Wiegand or GPIO interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views7 pages

    M-500 Datasheet

    Uploaded by

    Mexc6for1
    The M-500 UHF RFID module uses the PR9200 chip and provides excellent tag reading performance up to 15 meters with high gain antennas. It has wide operating temperature range, stable performance, and simple interface. The module supports both connector and surface mount installation methods and provides UART communication with optional Wiegand or GPIO interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    M-500 UHF RFID Mode Datasheet

    V 1.3

    1
    M-500 UHF RFID Mode Datasheet

    Table 1: Module Features List

    Phychip PR9200 Inside ◆ PR9200 has an outstanding performance with a low cost.

    ◆ Identifying Tags sensitively and stably.


    ◆ Stable read distance is 2-3m with Microstrip ceramics antenna.
    Excellent Performance of ◆ 8dBi Circular Polarization Planar Antenna: >10m.
    Reading Tags ◆ 12dBi Linear polarization antenna: >15m.
    ◆ Performance of multi-tags identification: >50pcs.
    ◆ Read rate: >50pcs/s.

    ◆ Don’t need any cooling devices.


    Completely Solve the Problem ◆ No heat during long-term continuous full load working at room temperature.
    of Heat ◆ Continuous Current <200mA @26 dBm Output (3.5V Power Supply).
    ◆ Peak pulse current <260mA @26 dBm Output (3.5V Power Supply).

    ◆ 24 hours X 365 days continuous working without Crash.


    Excellent Stability ◆ Less influence by shell, electromagnetic environment, etc.
    ◆ Wide temperature design. Temperature Coefficient is very low.

    Excellent Consistency ◆ A model of design consistency.


    ◆ Every indicators are calibrated rigorously, ensure consistency.

    ◆ Communication interface is compatible with our INDY R2000 series.


    Simple and Efficient Interface ◆ Peripheral circuits are very simple, single power, don’t need to connect Ta
    capacitor externally (See figure 1: Circuit Design Reference).

    Supports Two Installation


    ◆ Supports RF connector + FPC connector installation method.
    Methods
    ◆ Supports Surface Mount Solder.

    2
    M-500 UHF RFID Mode Datasheet

    Table 2: Electrical Characteristics

    Input Voltage DC 3.5V – 5 V


    Standby Mode <80mA (EN High Level)
    Current
    Sleep Current <100uA (EN Low Level)
    Operating Current 180mA @ 3.5V (26 dBm Output，25°C)。
    110mA @ 3.5V (18 dBm Output，25°C)。
    Starting Time <80mS
    Operating - 20 °C - + 70 °C
    Temperature
    Storage - 20 °C - + 85 °C
    Temperature
    Operating Humidity < 95% ( + 25 °C)
    Air Interface EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
    Protocol
    Spectrum Range 902Mhz – 928Mhz
    865MHz – 868MHz(Optional)
    US, Canada and other regions following U.S. FCC
    Europe and other regions following ETSI EN 302 208
    Mainland China
    Supported Regions Japan
    Korea
    Malaysia
    Taiwan
    Output Power 18-26 dBm
    Output Power +/- 1dB
    Precision
    Output Power +/- 0.2dB
    Flatness
    RF Connector I-PEX
    Receive Sensitivity < -70dBm
    Peak Inventory > 50 pcs/s
    Speed
    Tag Buffer Size 200 pcs @ 96 bit EPC
    Tag RSSI Supported
    TTL Uart port
    Host
    Wiegand 26
    Communication
    Wiegand 34
    GPIO 2 input 2 output (3.3V TTL Level)
    Baud Rate 115200 bps (Default and Recommended)
    38400bps
    Cooling Air cooling (Don’t need external Heatsink).

    3
    M-500 UHF RFID Mode Datasheet

    Table 3: PIN Assignment of Connector (Connector Mode)

    FPC Connector (20Pin , Pin separation distance: 0.5mm)


    PIN Interface Description
    1 VCC Power Supply DC 3.5V-5V
    2 VCC
    3 GND Grounding
    4 GND
    5 EN High level enable
    6 Reserved Reserved
    7 Reserved Reserved
    8 GND Grounding
    9 GND
    10 GPIO1 Input IO1
    11 GPIO2 Input IO2
    12 GND Grounding
    13 GND
    14 485 Direction 485 Data direction control
    15 Reserved Reserved
    16 RXD UART RXD
    17 TXD UART TXD
    18 Beeper Buzzer control, need external buffer
    19 GPIO3 Output IO3
    20 GPIO4 Output IO4

    4
    M-500 UHF RFID Mode Datasheet

    Table 4: PIN Assignment of Connector (SMT Mode)

    PIN Interface Description


    1 Antenna Antenna
    2 GND Grounding
    3 GND
    4 GND
    5 GND
    6 GND
    7 GND
    8 GND
    9 VCC Power Supply DC 3.5-5V
    10 GND Grounding
    11 EN High level enable
    12 RXD UART RXD
    13 TXD UART TXD
    14 Beeper Buzzer
    15 GPIO3 Output GPIO3
    16 GPIO4 Output GPIO4

    5
    M-500 UHF RFID Mode Datasheet

    Figure 1: Circuit Design Reference

    Note：
    1. Use the noninverting buffer
    driving Wiegand interface.
    2. Use the noninverting buffer
    driving Buzzer.

    6
    M-500 UHF RFID Mode Datasheet

    Figure 2: Dimensions of Module and Location Hole

    Figure 3:Thickness of PCB and Shield

    Figure 4: SMT Leg dimension

    ◆Figure 6 - 14 are three-dimensional renderings, non-physical.


    ◆Any discrepancy in future, please adhere to the actual product instead.

    You might also like