Surface Mount LRPS-3-850+

Power Splitter/Combiner LRPS-3-850

3 Way-0° 50Ω 500 to 850 MHz
Maximum Ratings Features
Operating Temperature -40°C to 85°C • low insertion loss, 0.7 dB typ. Generic photo used for illustration purposes only
Storage Temperature -55°C to 100°C
• good isolation, 23 dB typ.
• J-leads for strain relief & excellent solderability CASE STYLE: QQQ130
Power Input (as a splitter) 1W max.
Internal Dissipation 0.375W max. Applications +RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
Permanent damage may occur if any of these limits are exceeded. • UHF for RoHS Compliance methodologies and qualifications
• communication systems
Pin Connections
SUM PORT 6
PORT 1 1 Electrical Specifications
PORT 2 3
FREQ. ISOLATION INSERTION LOSS (dB) PHASE AMPLITUDE
PORT 3 4 RANGE (dB) ABOVE 4.8 dB UNBALANCE UNBALANCE
GROUND 2,5 (MHz) (Degrees) (dB)

fL-fU Typ. Min Typ. Max. Max. Max.

Outline Drawing
500-850 23 16 0.7 1.6 8 0.9

Typical Performance Data

Freq. Total Loss1 Amp. Isolation Phase VSWR VSWR VSWR VSWR
(MHz) (dB) Unbal. (dB) Unbal. S 1 2 3
(dB) (deg.)
S-1 S-2 S-3 1-2 1-3 2-3
500.00 5.31 5.24 5.30 0.08 22.65 21.54 22.09 0.35 1.43 1.35 1.30 1.35
PCB Land Pattern 520.00 5.32 5.26 5.30 0.07 23.03 21.90 22.41 0.29 1.42 1.34 1.29 1.34
540.00 5.30 5.24 5.29 0.06 23.44 22.28 22.73 0.40 1.40 1.33 1.28 1.32
570.00 5.31 5.26 5.30 0.05 24.18 22.94 23.24 0.45 1.38 1.32 1.27 1.31
600.00 5.34 5.30 5.32 0.05 25.09 23.70 23.79 0.54 1.35 1.31 1.26 1.29
630.00 5.35 5.31 5.32 0.03 26.20 24.60 24.38 0.69 1.31 1.30 1.25 1.27
655.00 5.35 5.33 5.32 0.03 27.35 25.46 24.93 0.79 1.28 1.30 1.24 1.26
670.00 5.37 5.36 5.33 0.04 28.21 26.08 25.26 0.88 1.26 1.29 1.24 1.25
685.00 5.39 5.37 5.34 0.05 29.25 26.76 25.62 0.99 1.24 1.29 1.23 1.25
700.00 5.40 5.41 5.36 0.05 30.46 27.58 25.97 1.10 1.22 1.29 1.23 1.24
730.00 5.44 5.45 5.39 0.06 33.85 29.49 26.65 1.39 1.19 1.28 1.23 1.23
770.00 5.52 5.56 5.45 0.11 41.96 33.24 27.20 1.76 1.16 1.28 1.23 1.21
Suggested Layout,
Tolerance to be within ±.002
810.00 5.65 5.72 5.55 0.17 35.11 36.31 26.71 2.31 1.18 1.29 1.24 1.20
840.00 5.80 5.89 5.66 0.23 29.55 33.17 25.47 2.69 1.25 1.31 1.26 1.20
850.00 5.83 5.95 5.69 0.25 28.14 31.70 24.92 2.83 1.29 1.32 1.27 1.20
Outline Dimensions ( inch
mm ) 1. Total Loss = Insertion Loss + 4.8dB splitter loss.
A B C D E F G LPRS-3-850 LPRS-3-850
.400 .31 .200 .10 .010 .100 .050 TOTAL LOSS ISOLATION
10.16 7.87 5.08 2.54 0.25 2.54 1.27 6.5 50
S-1(dB) S-2(dB) S-3(dB) 1-2 (dB) 1-3 (dB) 2-3 (dB)
H J K L M wt 45
.420 .120 .060 .100 .020 grams 6.2
TOTAL LOSS (dB)

ISOLATION (dB)

10.67 3.05 1.52 2.54 0.51 0.55 40

5.9
35
Demo Board MCL P/N: TB-226 5.6
30
Suggested PCB Layout (PL-140)
5.3 25

5.0 20
500 570 640 710 780 850 500 570 640 710 780 850
FREQUENCY (MHz) FREQUENCY (MHz)

LRPS-3-850
VSWR
1.6

1.5
#S-VSWR #1-VSWR electrical schematic
1.4
VSWR

1.3

1.2

1.1

1.0
500 570 640 710 780 850
FREQUENCY (MHz)

Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. REV. B
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. M151107
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled LRPS-3-850
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp DJ/TD/CP/AM

Mini-Circuits
® 200610

www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com