Surface Mount

Power Splitter/Combiner LRPQ-70J

2 Way-90° 50Ω 65 to 75 MHz
Maximum Ratings Features
Operating Temperature -40°C to 85°C • low insertion loss, 0.1 dB typ.
Storage Temperature -55°C to 100°C
• high isolation, 30 dB typ. Generic photo used for illustration purposes only
• excellent phase unbalance 1 deg. typ. CASE STYLE: QQQ569
Power Input (as a splitter) 1W max. • excellent return loss, VSWR 1.12:1 typ.
Permanent damage may occur if any of these limits are exceeded.
• aqueous washable
Pin Connections Applications
SUM PORT 6 • VHF
PORT 1 (0°) 4 • instrumentation
PORT 2 (+90°) 1 • modulators
• balanced amplifiers
GROUND 2,5 Electrical Specifications
50 OHM TERM EXTERNAL 3 FREQ. ISOLATION INSERTION LOSS (dB) PHASE AMPLITUDE
RANGE (dB) Avg. of Coupled Outputs UNBALANCE UNBALANCE
(MHz) ABOVE 3 dB (Degrees) (dB)
Outline Drawing
fL-fU Typ. Min. Typ. Max. Max. Max.

65-75 30 20 0.1 0.5 3 1.0

LRPQ units have bottom barrier ground plane insulated with glass barrier.

Typical Performance Data

Frequency Total Loss1 Amplitude Isolation Phase VSWR VSWR VSWR
(MHz) (dB) Unbalance (dB) Unbalance S 1 2
PCB Land Pattern (dB) (deg.)
S-1 S-2

65.00 2.78 3.45 0.68 29.08 90.74 1.12 1.11 1.06

65.50 2.81 3.42 0.61 29.00 90.74 1.12 1.11 1.06
66.00 2.84 3.38 0.54 28.95 90.73 1.12 1.11 1.06
66.75 2.88 3.34 0.45 28.81 90.69 1.12 1.11 1.06
67.50 2.94 3.29 0.35 28.73 90.72 1.12 1.11 1.06
68.25 2.98 3.25 0.27 28.60 90.75 1.12 1.11 1.06
69.00 3.02 3.20 0.18 28.52 90.78 1.12 1.11 1.06
Suggested Layout, 69.75 3.07 3.15 0.09 28.40 90.78 1.12 1.11 1.06
Tolerance to be within ±.002 70.50 3.10 3.10 0.00 28.32 90.81 1.12 1.11 1.06
71.25 3.15 3.07 0.08 28.21 90.77 1.12 1.11 1.06
72.00 3.19 3.02 0.17 28.13 90.79 1.12 1.11 1.06
73.00 3.25 2.97 0.29 27.99 90.82 1.12 1.11 1.06
Outline Dimensions ( inch
mm ) 74.00 3.30 2.91 0.39 27.87 90.86 1.12 1.11 1.06
74.50 3.33 2.89 0.45 27.83 90.84 1.12 1.11 1.06
A B C D E F G 75.00 3.36 2.86 0.50 27.76 90.86 1.12 1.11 1.06
.390 .31 .225 .060 -- .100 .045
9.91 7.87 5.72 1.52 -- 2.54 1.14 1. Total Loss = Insertion Loss + 3dB splitter loss.
LRPQ-70J LRPQ-70J
H J K L M wt TOTAL LOSS ISOLATION
33
.420 .120 .060 .100 -- grams 4.4
10.67 3.05 1.52 2.54 -- 0.50 S-1(dB) S-2(dB)
4.0
TOTAL LOSS (dB)

31
ISOLATION (dB)

3.6
Demo Board MCL P/N: TB-226 29
3.2
Suggested PCB Layout (PL-140)
27
2.8

2.4 25
65 67 69 71 73 75 65 67 69 71 73 75
FREQUENCY (MHz) FREQUENCY (MHz)

LRPQ-70J
electrical schematic
PHASE UNBALANCE
91.0
PHASE UNBALANCE

90.8

90.6
(Deg.)

90.4

90.2

90.0
65 67 69 71 73 75
FREQUENCY (MHz)

Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. REV. B
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. M151107
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled LRPQ-70J
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp HY/TD/CP

Mini-Circuits
® 200818

www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com