Technical data sheet LM230A-S

Damper actuator for adjusting

dampers in technical building
installations
• Air damper size up to approx. 1 m²
• Torque motor 5 Nm
• Nominal voltage AC 230 V
• Control Open/close, 3-point
• with integrated auxiliary switch

Technical data
Electrical data Nominal voltage AC 230 V
Nominal voltage frequency 50/60 Hz
Nominal voltage range AC 85...264 V
Power consumption in operation 1.5 W
Power consumption in rest position 0.5 W
Power consumption for wire sizing 3.5 VA
Auxiliary switch 1 x SPDT, 0...100%
Switching capacity auxiliary switch 1 mA...3 A (0.5 A inductive), AC 250 V
Connection supply / control Cable 1 m, 3 x 0.75 mm²
Connection auxiliary switch Cable 1 m, 3 x 0.75 mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor 5 Nm
Direction of motion motor selectable with switch 0 (ccw rotation) / 1 (cw
rotation)
Manual override with push-button, can be locked
Angle of rotation Max. 95°
Angle of rotation note can be limited on both sides with adjustable
mechanical end stops
Running time motor 150 s / 90°
Sound power level, motor 35 dB(A)
Mechanical interface Universal shaft clamp 6...20 mm
Position indication Mechanically, pluggable
Safety Protection class IEC/EN II reinforced insulation
Protection class UL II reinforced insulation
Protection class auxiliary switch IEC/EN II reinforced insulation
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2
Enclosure UL Enclosure Type 2
EMC CE according to 2014/30/EU
Low voltage directive CE according to 2014/35/EU
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
Certification UL cULus according to UL60730-1A, UL60730-2-
14 and CAN/CSA E60730-1:02
Certification UL note The UL marking on the actuator depends on the
production site, the device is UL-compliant in
any case
Mode of operation Type 1.B
Rated impulse voltage supply / control 2.5 kV
Rated impulse voltage auxiliary switch 2.5 kV
Control pollution degree 3
Ambient temperature -30...50°C
Storage temperature -40...80°C
Ambient humidity Max. 95% r.H., non-condensing
Servicing maintenance-free
Weight Weight 0.54 kg

www.belimo.com LM230A-S • en-gb • 2019-12-16 • subject to changes 1

 Rotary actuator, Open/close, 3-point, AC 230 V, 5 Nm,
LM230A-S with integrated auxiliary switch

Safety notes
• The device must not be used outside the specified field of application, especially not

! in aircraft or in any other airborne means of transport.

• Outdoor application: only possible in case that no (sea) water, snow, ice, insolation
or aggressive gases interfere directly with the actuator and that is ensured that the
ambient conditions remain at any time within the thresholds according to the data
sheet.
• Caution: Power supply voltage!
• Only authorised specialists may carry out installation. All applicable legal or
institutional installation regulations must be complied during installation.
• The device may only be opened at the manufacturer’s site. It does not contain any
parts that can be replaced or repaired by the user.
• Cables must not be removed from the device.
• To calculate the torque required, the specifications supplied by the damper
manufacturers concerning the cross-section, the design, the installation site and the
ventilation conditions must be observed.
• The device contains electrical and electronic components and must not be disposed
of as household refuse. All locally valid regulations and requirements must be
observed.

Product features
Simple direct mounting Simple direct mounting on the damper shaft with a universal shaft clamp, supplied with
an anti-rotation device to prevent the actuator from rotating.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the
button is pressed or remains locked).
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops
when the end stop is reached.
Flexible signalization With adjustable auxiliary switch (0...100%)

Accessories

Description Type
Electrical accessories Auxiliary switch 1 x SPDT add-on S1A
Auxiliary switch 2 x SPDT add-on S2A
Auxiliary switch 2 x SPDT add-on, grau S2A/300 GR
Auxiliary switch 2 x SPDT add-on, grau S2A/500 GR
Feedback potentiometer 140 Ω add-on P140A
Feedback potentiometer 140 Ω add-on, grau P140A GR
Feedback potentiometer 200 Ω add-on P200A
Feedback potentiometer 500 Ω add-on P500A
Feedback potentiometer 500 Ω add-on, grau P500A GR
Feedback potentiometer 1 kΩ add-on P1000A
Feedback potentiometer 1 kΩ add-on, grau P1000A GR
Feedback potentiometer 2.8 kΩ add-on P2800A
Feedback potentiometer 2.8 kΩ add-on, grau P2800A GR
Feedback potentiometer 5 kΩ add-on P5000A
Feedback potentiometer 5 kΩ add-on, grau P5000A GR
Feedback potentiometer 10 kΩ add-on P10000A
Feedback potentiometer 10 kΩ add-on, grau P10000A GR
Description Type
Mechanical accessories Shaft extension 170 mm Ø10 mm for damper shaft Ø 6...16 mm AV6-20
Shaft clamp one-sided, clamping range Ø6...20 mm, Multipack 20 pcs. K-ELA
Shaft clamp one-sided, clamping range Ø6...10 mm, Multipack 20 pcs. K-ELA10
Shaft clamp one-sided, clamping range Ø6...13 mm, Multipack 20 pcs. K-ELA13
Shaft clamp one-sided, clamping range Ø6...16 mm, Multipack 20 pcs. K-ELA16

2 LM230A-S • en-gb • 2019-12-16 • subject to changes www.belimo.com

 Rotary actuator, Open/close, 3-point, AC 230 V, 5 Nm,
LM230A-S with integrated auxiliary switch

Accessories

Description Type
Anti-rotation mechanism 180 mm, Multipack 20 pcs. Z-ARS180
Form fit insert 8x8 mm, Multipack 20 pcs. ZF8-LMA
Form fit insert 10x10 mm, Multipack 20 pcs. ZF10-LMA
Form fit insert 12x12 mm, Multipack 20 pcs. ZF12-LMA
Form fit insert 8x8 mm, with angle of rotation limiter and position ZFRL8-LMA
indication, Multipack 20 pcs.
Form fit insert 10x10 mm, with angle of rotation limiter and position ZFRL10-LMA
indication, Multipack 20 pcs.
Form fit insert 12x12 mm, with angle of rotation limiter and position ZFRL12-LMA
indication, Multipack 20 pcs.
Position indicator, Multipack 20 pcs. Z-PI

Electrical installation

Notes • Caution: Power supply voltage!

! • Parallel connection of other actuators possible. Observe the performance data.

Wiring diagrams

AC 230 V, open/close AC 230 V, 3-point

N L N L

0
Cable colours: Cable colours:
1 = blue 1 = blue
1 2 3 S1 S2 S3 2 = brown 1 2 3 S1 S2 S3 2 = brown
3 = white 3 = white
0 S1 = violet 0 S1 = violet
0 S2 = red 0 S2 = red
1 0...100% 1 0...100%
1 S3 = white 1 S3 = white

Operating controls and indicators

Auxiliary switch settings

A Note: Perform settings on the actuator only in deenergised state.

2
1 Gear disengagement
0
1 Holding button pressed down: Gear is disengaged.
1 Manual override is possible.
3
2 Spindle clamp
Turn until edge line A displays the desired switching position of the actuator and release button 1 .
1
3 Auxiliary switch
Turn rotary knob until the arrow points to the vertical line.
4 Cable
Connect continuity tester to S1 + S2 or to S1 + S3.
If the auxiliary switch should switch in the opposite direction, rotate the auxiliary switch by 180°.

4
S1
S2
S3

www.belimo.com LM230A-S • en-gb • 2019-12-16 • subject to changes 3

 Rotary actuator, Open/close, 3-point, AC 230 V, 5 Nm,
LM230A-S with integrated auxiliary switch

Dimensions [mm]
Spindle length Dimensional drawings

Min. 37
L

61
-

47
Clamping range
116

6...20 ≥6 ≤20 66

22 94 41

4 LM230A-S • en-gb • 2019-12-16 • subject to changes www.belimo.com